00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1)
00:0c.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
03:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce 9400] (rev b1)
04:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
05:00.0 FireWire (IEEE 1394): Agere Systems FW643 PCI Express1394b Controller (PHY/Link) (rev 07)

#
# Configuration file for pommed
#

# General configuration
general {
	# fnmode: functions keys first (no need to use fn) or last
	# Value is either 1 or 2, effect is hardware-dependent
	fnmode = 1
}

# ATI X1600 backlight control (MacBook Pro v1 & v2)
lcd_x1600 {
	# initial backlight level [200] (0 - 255, -1 to disable)
	init = -1
	# step value (1 - 127)
	step = 10
	# backlight level when on battery [80] (1 - 255, 0 to disable)
	on_batt = 80
}

# Intel 945GM, 965GM backlight control (MacBook, MacBook Air)
lcd_gma950 {
	# initial backlight level [0x6f] (0x1f - 0x94 usually, -1 to disable)
	init = -1
	# step value (0x01 - 0x20)
	step = 0x0f
	# backlight level when on battery [0x40] (0x1f - 0x94 usually, 0 to disable)
	on_batt = 0x40
}

# nVidia GeForce 8600M GT backlight control (MacBook Pro v3 & v4)
lcd_nv8600mgt {
	# initial backlight level [12] (0 - 15, -1 to disable)
	init = 10
	# step value (1 - 2)
	step = 1
	# backlight level when on battery [6] (1 - 15, 0 to disable)
	on_batt = 6
}

# Audio support
audio {
	# Use amixer or alsamixer/alsamixergui to determine the sound card
	# and the mixer elements to use here.

	# sound card to use
	card = "default"
	# initial volume [80] (0 - 100%, -1 to disable)
	init = 50
	# step value (1 - 50%)
	step = 10
	# beep on volume change
	beep = yes
	# mixer element for volume adjustment
	volume = "PCM"
	# mixer element for muting the speakers
	speakers = "Front"
	# mixer element for muting the headphones
	headphones = "Headphone"
}

# Keyboard backlight control
kbd {
	# default value for automatic backlight (0 - 255)
	default = 240
	# step value (1 - 127)
	step = 10
	# ambient light thresholds for automatic backlight (0 - 255)
	on_threshold = 5
	off_threshold = 240
	# enable/disable automatic backlight
	auto = yes
	# idle timer - switches off keyboard backlight automatically (timeout in seconds, -1 to disable)
	idle_timer = 60
}

# CD/DVD drive ejection
eject {
	# enable/disable eject key
	enabled = yes
	# CD/DVD device
	device = "/dev/dvd"
}

# Beeper
beep {
	# enable/disable beeper
	enabled = yes
	# WAV file to use (from pommed: goutte.wav or click.wav in /usr/share/pommed)
	beepfile = "/usr/share/pommed/goutte.wav"
}

# Apple Remote - deprecated
# Note: the appleir driver is required for this to work; this driver has been
# obsoleted with Linux 2.6.22, so unless you are running a kernel < 2.6.22 or
# use the appleir driver on a newer kernel, this won't work.
# You should use LIRC instead.
appleir {
	# enable/disable the appleir support
	enabled = no
}