#0 Re : -1 » Lenteur des transferts USB » Le 27/12/2011, à 18:25
- eltopo
- Réponses : 855
bon, ben salut je viens m'y mettre aussi. j'ai lu (pas toujours avec beaucoup d'attention) les 30 pages de ce fil. J'y connais pas grande chose, mais j'ai aussi l'impression comme certains que nous avons à faire à plusieurs problèmes différents qui se ressemblent. Pour l'instant je n'ai pas tenté les différents tours d'acrobaties proposés au long de ce fil, parce qu'il me semblait qu'aucun n'avait vraiment apporté satisfaction. c'est pas que j'ai rien envie d'essayer, mais passer des heures a refaire ce que d'autres ont déjà fait sans obtenir de résultat concluant me paraissait une perte de temps (si j'ai tort, il suffit de me le signaler).
voilà comment les choses se passent sur mon poste de travail.
j'essaye de copier un fichier .avi de 1.7Gio sur ma clé USB. d'abord avec nautilus ça m'a pris des plombes. durant l'opération j'ai ouvert le moniteur système et là je pouvais voir que la plupart du temps nautilus était au repos. Du coup j'ai rééssayé l'opération avec time cp et top (au passage chez moi avec ou sans compiz ça change rien). Même phénomène, cp apparaît par à coup dans la liste des processus actifs et pour un laps de temps très court. j'ai pas de manière scientifique de le mesurer, mais j'ai l'impression qu'il copie mon fichier par coup de 10Mo et prend un grande pause à chaque fois.
voilà le résultat du time cp
real 178m14.064s
user 0m0.032s
sys 0m4.860s
voilà lspci
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
03:00.0 VGA compatible controller: nVidia Corporation Device 06c4 (rev a3)
03:00.1 Audio device: nVidia Corporation GF100 High Definition Audio Controller (rev a1)
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05)
ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05)
ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05)
ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05)
ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05)
ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05)
ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05)
ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05)
ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05)
ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05)
ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05)
ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05)
ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05)
ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05)
ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05)
ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05)
et lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 004: ID 046a:0001 Cherry GmbH My3000 Keyboard
Bus 006 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 006 Device 002: ID 046a:0003 Cherry GmbH My3000 Hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 18a5:0304 Verbatim, Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
je suis sur ubuntu 10.10 mais comme toutes les distros semblent touchées ça n'a pas vraiment d'importance.
mon post n'apporte pas grand chose, mais vu qu'on a pas forcément tous le même problème, peut-être qu'au lieu de chercher des points communs, il faut creuser chaque cas et peut-être qu'ensuite on y verra plus clair. quoi qu'il en soit, je me porte volontaire pour rentrer toutes les lignes de commandes que vous voulez dans mon terminal et de vous filez toutes les infos que vous voulez, mais il faut m'expliquer avec des mots simples... je veux bien aussi reprendre les soluces déjà données, mais accompagné, parce que là j'ai l'impression de faire des trucs à gauche et à droite un peu au bol sans avoir aucune idée de ce que je fais et je trouve pas ça très agréable.
voilà, je vais surveiller ce post régulièrement donc si quelqu'un a envie de reprendre le problème avec moi, c'est parti!
#1 Re : -1 » Lenteur des transferts USB » Le 27/12/2011, à 18:55
- eltopo
- Réponses : 855
eltopo a écrit :je suis sur ubuntu 10.10 mais comme toutes les distros semblent touchées ça n'a pas vraiment d'importance.
Si, parce que c'est vraisemblablement un bug du noyau. Donc c'est possible que le bug soit corrigé sur une version plus récente d'Ubuntu ou d'une autre distro.
ok, j'avais pas fait attention à ça, merci de la remarque. Du coup est-ce qu'il y a d'autres choses que j'ai peut-être considérées comme peu importantes que je peux rajouter à mon post précédent pour qu'il serve à quelque chose?
encore merci!
#2 Re : -1 » Lenteur des transferts USB » Le 27/12/2011, à 19:14
- eltopo
- Réponses : 855
À priori, non. Mais comme personne n'a aucune idée de l'origine du problème, c'est pas évident de demander des infos précises...
j'avais cru comprendre en effet, mais est-ce qu'on a vraiment tous le même problème? j'suis peut-être chiant à débarquer comme ça après 30 pages de posts et en plus avec des personnes qui ont ce problèmes depuis plusieurs années sans avoir de solution à portée, mais en lisant ce fil j'avais parfois l'impression que toutes les personnes qui ont un problème avec l'usb sont venues le poster ici et que c'est parti dans la recherche d'un symptôme commun alors que c'est peut-être juste un hasard et qu'avec cette façon de faire les gens se sont égarés dans tous les sens. mais bon c'est une impression, rien d'autre. j'ai aucune compétence pour pourvoir l'affirmer.
en tout cas merci d'avoir réagit. je vais continuer, sans espoirs, de chercher si je trouve quelque chose.
#3 Re : -1 » Lenteur des transferts USB » Le 28/12/2011, à 11:22
- eltopo
- Réponses : 855
je m'excuse de revenir à la charge, mais j'ai encore deux trucs.
d'abord celui qui m'a trotté dans la tête toute la nuit. Il n'y aurait pas moyen de faire un alias pour la commande cp pour que ça "force" la copie?
la deuxième question est liée à la première. je comprends pas vraiment comment ça fonctionne. est-ce que quelqu'un pourrait m'expliquer de manière schématique qu'est-ce qu'il se passe quand je copie un fichier de mon ordi sur une clé usb en passant par la commande cp. quels processus sont activés, de quels éléments (noyaux, modules, etc) ça a besoin pour que l'opération fonctionne normalement et de quelle manière je peux pas à pas vérifier que chacun de ces éléments fonctionnent? (je me rends bien compte que la réponse à cette question n'est pas facile, désolé).
si quelqu'un à des éléments de réponse, merci d'avance.
#4 Re : -1 » Lenteur des transferts USB » Le 28/12/2011, à 12:50
- eltopo
- Réponses : 855
@ t-shirtman, zut. mais merci quand même
@L_d_v_c@, j'ai cherché si je trouvais de la doc sur les modes de bus usb pour comprendre de quoi tu parlais, j'ai pas encore trouvé mais je continue à chercher. idem pour ACPI (j'ai juste trouvé un truc qui s'appelle acer_acpi, mais ça à pas l'air d'être ça).
après je cherchais pas à lui attribuer 100% du proc, mais comme j'ai vu que certains devais charger des modules (ou je sais pas quoi) pour que ça marche, je m'étais dit qu'il était possible de faire un alias qui dise je veux que tu copies ce fichier là dans ces conditions (c'est ce que j'entends par "forcé"). mais après coup je me rends compte que si c'était si facile, pleins de gens l'auraient déjà fait...
bref je vais lire ces histoires de bus et d'acpi si je trouve quelque chose histoire d'être moins bête à mon prochain passage
edit: je viens de trouver ce qu'est l'APCI sur wikipédia... (j'oublie que ça existe parfois, c'est pratique).
#5 Re : -1 » Lenteur des transferts USB » Le 28/12/2011, à 16:27
- eltopo
- Réponses : 855
me revoilà
j'ai essayé ça:http://forum.ubuntu-fr.org/viewtopic.php?pid=5343711#p5343711
j'ai pas l'impression que ça change grand chose. au passage, ça veut dire quoi "balance_dirty_pages" dans le moniteur système (colonne canal d'attente)? cp semble bloqué dans cet état et il est la plupart du temps au repos.
#6 Re : -1 » Lenteur des transferts USB » Le 28/12/2011, à 18:31
- eltopo
- Réponses : 855
Si malheureusement et plus d'une fois.
La soluce est difficile a trouver car le souci est totalement aléatoire.
Et nous venons de découvrir un autre souci, peut être sans rapport, lié a la qualité d'un câble usb d'un autre perif qui fait chuter ou même empêche tout transfert des autres perifs.
Genre erreur scanner ou imprimante ou clef alors que le câble en cause n'est pas sur le perif concerné le première fois on y croyait pas trop, mais le souci c'est répété une dizaine de fois et a chaque fois, réglé par le recherche et l’échange du câble fautif.
Me demandez pas le pourquoi, je vous donne la soluce que nous avons trouvé.
Sous win le défaut ce manifeste soit par le message "branchez votre appareil sur un port USB2" soit, en plein travail, par un plantage ou "délais dépassé", sous Linux je ne l'ai pas encore eut.
Je reste persuadé que le souci est matériel pas soft, même si certaines solutions soft peuvent compenser
woh, même les câbles (ya de quoi les pêter, héhéhé)
je veux bien que le souci soit matériel, mais dans ce cas pourquoi ça arrive à des gens qui ont du matériel différent? ça revient au même. Peut-être que sur un ordi il y a 10 trucs qui peuvent potentiellement foutre la merde avec l'usb (avec peut-être un mélange de problèmes matériels et logiciels).
bon moi je vais arrêter pour aujourd'hui. je crois que le noapic n'a pas été apprécié par mon ordi il est toujours en train de "copier" ce maudit fichier, je vais killer le processus et éteindre la bécane.
Bonne soirée à tous et à bientôt
edit: super, il est ininterruptible...
#7 Re : -1 » Lenteur des transferts USB » Le 29/12/2011, à 12:50
- eltopo
- Réponses : 855
Parce-que les matos est différend mais les puces sont souvent les mêmes, et de toute façon, elles doivent correspondre a un standard qui régit le protocole, donc il y a des chances de retrouver les problèmes dans des matos, a première vue, différents
pff, ça me dépasse complétement. c'est déconcertant là je sais pas quoi faire. c'est pire que de ce retrouver face à un problème compliqué, mais qu'on peut surpasser en acquérant quelques connaissances. là avec ce que tu dis, j'ai l'impression que j'ai beau m'atteler à lire de la doc, c'est de toute façon peine perdue.
aujourd'hui je vais faire autre chose, sinon ça va me coller la déprime
#8 Re : -1 » Lenteur des transferts USB » Le 29/12/2011, à 15:25
- eltopo
- Réponses : 855
Tu ne résoudra pas le soucis tout seul, à moins d'être codeurs kernel, par contre, si tu veux faire une différence et aider à le résoudre, recherche sur launchpad si le bug est signalé, marque toi comme touché aussi, et demande ce que tu peux faire comme test pour tenter d'isoler le soucis. Tu peux aussi installer un noyau "vanilla" (sans les changements d'ubuntu) pour voir si ça fait une différence, et tester la dernière version disponible, ça c'est dans tes cordes si t'es un peu motivé.
cool! ça me redonne un peu le moral.
j'ai trouvé deux fil qui semblent correspondre sur launchpad:
https://bugs.launchpad.net/ubuntu/+sour … bug/183839
https://bugs.launchpad.net/ubuntu/+sour … bug/392089
je vais commencer par poster dans le premier.
J'ai jamais entendu parlé de vanilla. en cherchant je tombe sur pleins de pages qui traitent de différents sujets. tu pourrais un peu détailler ce que tu entends par installer un noyau vanilla? merci beaucoup!
p.s. avant de me lancer là dedans, je vais faire une sauvegarde (sur usb, donc ça va me prendre des plombes hihihi)
#9 Re : -1 » Lenteur des transferts USB » Le 29/12/2011, à 20:27
- eltopo
- Réponses : 855
j'ai fait mon post sur launchpad, ça m'a permit d'apprendre quelques commandes au passage.
du coup les voilà
lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13)
Subsystem: ASUSTeK Computer Inc. Device [1043:836b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f8000000-fbbfffff
Prefetchable memory behind bridge: 00000000d4000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: i7core_edac
Kernel modules: i7core_edac
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: mce-xeon75xx
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 15
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 3
Region 4: I/O ports at a880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at ac00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:8357]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 73
Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c03fffff
Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f6e00000-00000000f6efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 4
Region 4: I/O ports at a080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at a480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 4
Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 71
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9880 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9480 [size=4]
Region 4: I/O ports at 9400 [size=32]
Region 5: Memory at f7ffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f7ffd000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel modules: i2c-i801
03:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:06c4] (rev a3) (prog-if 00 [VGA controller])
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:1153]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 15
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at d4000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at bc00 [size=128]
[virtual] Expansion ROM at fbb00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb
03:00.1 Audio device [0403]: nVidia Corporation GF100 High Definition Audio Controller [10de:0be5] (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:1153]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at fbbfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 15
Region 5: Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fbce0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
04:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron
05:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8384]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fbdff000 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at d800 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci, ohci1394
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 72
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f6ef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers [8086:2c41] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder [8086:2c01] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0 [8086:2c10] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 [8086:2c11] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller [8086:2c18] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder [8086:2c19] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers [8086:2c1c] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-31-generic (buildd@palmer) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #63-Ubuntu SMP Mon Nov 28 19:23:11 UTC 2011 (Ubuntu 2.6.35-31.63-generic 2.6.35.13)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask E00000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable)
[ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] modified: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] modified: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 37592000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 009a9000 - 01406412
[ 0.000000] Move RAMDISK from 0000000037592000 - 0000000037fef411 to 009a9000 - 01406411
[ 0.000000] ACPI: RSDP 000fb1a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT bf780000 00040 (v01 022410 RSDT1405 20100224 MSFT 00000097)
[ 0.000000] ACPI: FACP bf780200 00084 (v01 022410 FACP1405 20100224 MSFT 00000097)
[ 0.000000] ACPI: DSDT bf7804b0 0C359 (v01 A1279 A1279001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS bf798000 00040
[ 0.000000] ACPI: APIC bf780390 000D8 (v01 022410 APIC1405 20100224 MSFT 00000097)
[ 0.000000] ACPI: MCFG bf780470 0003C (v01 022410 OEMMCFG 20100224 MSFT 00000097)
[ 0.000000] ACPI: OEMB bf798040 00072 (v01 022410 OEMB1405 20100224 MSFT 00000097)
[ 0.000000] ACPI: HPET bf78f4b0 00038 (v01 022410 OEMHPET 20100224 MSFT 00000097)
[ 0.000000] ACPI: OSFR bf78f4f0 000B0 (v01 022410 OEMOSFR 20100224 MSFT 00000097)
[ 0.000000] ACPI: SSDT bf799cd0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2175MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bf780
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] On node 0 totalpages: 784142
[ 0.000000] free_area_init_node: node 0, pgdat c0801fc0, node_mem_map c1408200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4352 pages used for memmap
[ 0.000000] HighMem zone: 552578 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: P6T
[ 0.000000] MPTABLE: Product ID:
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #8 Version 32 at 0xFEC00000.
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] I/O APIC #9 Version 32 at 0xFEC8A000.
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] Processors: 8
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s36416 r0 d20928 u524288
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778014
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-31-generic root=UUID=406155c0-a3fe-43dd-83eb-9a7ee2f04f25 ro splash noapic quiet splash noapic
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15684800 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (55 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a4b5c] TEXT DATA BSS
[ 0.000000] #3 [00009a5000 - 00009a8228] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009ec00 - 00000f12f0] BIOS reserved
[ 0.000000] #7 [00000f14ac - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f12f0 - 00000f14ac] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #12 [00009a9000 - 0001407000] NEW RAMDISK
[ 0.000000] #13 [0001407000 - 0001408000] BOOTMEM
[ 0.000000] #14 [0001408000 - 0002bf8000] BOOTMEM
[ 0.000000] #15 [0002bf8000 - 0002bf8004] BOOTMEM
[ 0.000000] #16 [0002bf8040 - 0002bf8100] BOOTMEM
[ 0.000000] #17 [0002bf8100 - 0002bf8154] BOOTMEM
[ 0.000000] #18 [0002bf8180 - 0002bfb180] BOOTMEM
[ 0.000000] #19 [0002bfb180 - 0002bfb24c] BOOTMEM
[ 0.000000] #20 [0002bfb280 - 0002c07280] BOOTMEM
[ 0.000000] #21 [0002c07280 - 0002c072a5] BOOTMEM
[ 0.000000] #22 [0002c072c0 - 0002c0730e] BOOTMEM
[ 0.000000] #23 [0002c07340 - 0002c07474] BOOTMEM
[ 0.000000] #24 [0002c07480 - 0002c074c0] BOOTMEM
[ 0.000000] #25 [0002c074c0 - 0002c07500] BOOTMEM
[ 0.000000] #26 [0002c07500 - 0002c07540] BOOTMEM
[ 0.000000] #27 [0002c07540 - 0002c07580] BOOTMEM
[ 0.000000] #28 [0002c07580 - 0002c075c0] BOOTMEM
[ 0.000000] #29 [0002c075c0 - 0002c07600] BOOTMEM
[ 0.000000] #30 [0002c07600 - 0002c07640] BOOTMEM
[ 0.000000] #31 [0002c07640 - 0002c07680] BOOTMEM
[ 0.000000] #32 [0002c07680 - 0002c076c0] BOOTMEM
[ 0.000000] #33 [0002c076c0 - 0002c07700] BOOTMEM
[ 0.000000] #34 [0002c07700 - 0002c07710] BOOTMEM
[ 0.000000] #35 [0002c07740 - 0002c077bf] BOOTMEM
[ 0.000000] #36 [0002c077c0 - 0002c0783f] BOOTMEM
[ 0.000000] #37 [0003000000 - 000300e000] BOOTMEM
[ 0.000000] #38 [0003080000 - 000308e000] BOOTMEM
[ 0.000000] #39 [0003100000 - 000310e000] BOOTMEM
[ 0.000000] #40 [0003180000 - 000318e000] BOOTMEM
[ 0.000000] #41 [0003200000 - 000320e000] BOOTMEM
[ 0.000000] #42 [0003280000 - 000328e000] BOOTMEM
[ 0.000000] #43 [0003300000 - 000330e000] BOOTMEM
[ 0.000000] #44 [0003380000 - 000338e000] BOOTMEM
[ 0.000000] #45 [0002c09840 - 0002c09844] BOOTMEM
[ 0.000000] #46 [0002c09880 - 0002c09884] BOOTMEM
[ 0.000000] #47 [0002c098c0 - 0002c098e0] BOOTMEM
[ 0.000000] #48 [0002c09900 - 0002c09920] BOOTMEM
[ 0.000000] #49 [0002c09940 - 0002c099d8] BOOTMEM
[ 0.000000] #50 [0002c09a00 - 0002c09a38] BOOTMEM
[ 0.000000] #51 [0002c09a40 - 0002c0da40] BOOTMEM
[ 0.000000] #52 [0002c0da40 - 0002c8da40] BOOTMEM
[ 0.000000] #53 [0002c8da40 - 0002ccda40] BOOTMEM
[ 0.000000] #54 [000338e000 - 00042834c0] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bf780)
[ 0.000000] Memory: 3075924k/3137024k available (4940k kernel code, 60644k reserved, 2332k data, 688k init, 2227720k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc081b000 - 0xc08c7000 ( 688 kB)
[ 0.000000] .data : 0xc05d33fe - 0xc081a7a8 (2332 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d33fe (4940 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:1152
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2672.441 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.88 BogoMIPS (lpj=10689764)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000034] AppArmor: AppArmor initialized
[ 0.000035] Yama: becoming mindful.
[ 0.000078] Mount-cache hash table entries: 512
[ 0.000172] Initializing cgroup subsys ns
[ 0.000175] Initializing cgroup subsys cpuacct
[ 0.000179] Initializing cgroup subsys memory
[ 0.000186] Initializing cgroup subsys devices
[ 0.000188] Initializing cgroup subsys freezer
[ 0.000189] Initializing cgroup subsys net_cls
[ 0.000209] CPU: Physical Processor ID: 0
[ 0.000210] CPU: Processor Core ID: 0
[ 0.000214] mce: CPU supports 9 MCE banks
[ 0.000228] CPU0: Thermal monitoring enabled (TM1)
[ 0.000235] using mwait in idle threads.
[ 0.000239] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[ 0.000247] ... version: 3
[ 0.000248] ... bit width: 48
[ 0.000249] ... generic registers: 4
[ 0.000251] ... value mask: 0000ffffffffffff
[ 0.000252] ... max period: 000000007fffffff
[ 0.000254] ... fixed-purpose events: 3
[ 0.000255] ... event mask: 000000070000000f
[ 0.002603] ACPI: Core revision 20100428
[ 0.011702] ACPI: setting ELCR to 0200 (from ccb8)
[ 0.036264] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036269] ftrace: allocating 21777 entries in 43 pages
[ 0.042433] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.042439] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.149118] Booting Node 0, Processors #1
[ 0.159308] Initializing CPU#1
[ 0.257066] #2
[ 0.267350] Initializing CPU#2
[ 0.365096] #3
[ 0.375381] Initializing CPU#3
[ 0.473045] #4
[ 0.483325] Initializing CPU#4
[ 0.580951] #5
[ 0.591230] Initializing CPU#5
[ 0.688948] #6
[ 0.699224] Initializing CPU#6
[ 0.796846] #7 Ok.
[ 0.807120] Initializing CPU#7
[ 0.904783] Brought up 8 CPUs
[ 0.904785] Total of 8 processors activated (42596.20 BogoMIPS).
[ 0.909069] devtmpfs: initialized
[ 0.910002] regulator: core version 0.5
[ 0.910024] Time: 17:28:34 Date: 12/29/11
[ 0.910052] NET: Registered protocol family 16
[ 0.910121] Trying to unpack rootfs image as initramfs...
[ 0.910129] EISA bus registered
[ 0.910135] ACPI: bus type pci registered
[ 0.910185] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.910188] PCI: not using MMCONFIG
[ 0.910279] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
[ 0.910281] PCI: Using configuration type 1 for base access
[ 0.910964] bio: create slab <bio-0> at 0
[ 0.912333] ACPI: EC: Look up EC in DSDT
[ 0.913673] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.945226] ACPI: SSDT bf7980c0 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.945672] ACPI: Dynamic OEM Table Load:
[ 0.945674] ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.946047] ACPI: Interpreter enabled
[ 0.946051] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.946069] ACPI: Using PIC for interrupt routing
[ 0.946117] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.947992] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.947994] PCI: Using MMCONFIG for extended config space
[ 0.956576] ACPI: No dock devices found.
[ 0.956579] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.956713] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.956972] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.956974] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.956976] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.956978] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.956980] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.956981] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.957034] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.957037] pci 0000:00:00.0: PME# disabled
[ 0.957091] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.957094] pci 0000:00:01.0: PME# disabled
[ 0.957148] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.957151] pci 0000:00:03.0: PME# disabled
[ 0.957206] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.957208] pci 0000:00:07.0: PME# disabled
[ 0.957414] pci 0000:00:1a.0: reg 20: [io 0xa800-0xa81f]
[ 0.957473] pci 0000:00:1a.1: reg 20: [io 0xa880-0xa89f]
[ 0.957531] pci 0000:00:1a.2: reg 20: [io 0xac00-0xac1f]
[ 0.957588] pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
[ 0.957639] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.957642] pci 0000:00:1a.7: PME# disabled
[ 0.957674] pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[ 0.957712] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.957715] pci 0000:00:1b.0: PME# disabled
[ 0.957774] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.957777] pci 0000:00:1c.0: PME# disabled
[ 0.957838] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.957841] pci 0000:00:1c.2: PME# disabled
[ 0.957901] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.957904] pci 0000:00:1c.3: PME# disabled
[ 0.957964] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.957967] pci 0000:00:1c.4: PME# disabled
[ 0.958013] pci 0000:00:1d.0: reg 20: [io 0xa080-0xa09f]
[ 0.958072] pci 0000:00:1d.1: reg 20: [io 0xa400-0xa41f]
[ 0.958130] pci 0000:00:1d.2: reg 20: [io 0xa480-0xa49f]
[ 0.958188] pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
[ 0.958238] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.958241] pci 0000:00:1d.7: PME# disabled
[ 0.958350] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.958354] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.958403] pci 0000:00:1f.2: reg 10: [io 0x9c00-0x9c07]
[ 0.958408] pci 0000:00:1f.2: reg 14: [io 0x9880-0x9883]
[ 0.958413] pci 0000:00:1f.2: reg 18: [io 0x9800-0x9807]
[ 0.958417] pci 0000:00:1f.2: reg 1c: [io 0x9480-0x9483]
[ 0.958422] pci 0000:00:1f.2: reg 20: [io 0x9400-0x941f]
[ 0.958427] pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
[ 0.958455] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.958458] pci 0000:00:1f.2: PME# disabled
[ 0.958482] pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
[ 0.958494] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.958543] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.958547] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.958550] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.958554] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.958587] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.958590] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.958593] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.958598] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.958645] pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.958653] pci 0000:03:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.958661] pci 0000:03:00.0: reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.958666] pci 0000:03:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 0.958670] pci 0000:03:00.0: reg 30: [mem 0xfbb00000-0xfbb7ffff pref]
[ 0.958716] pci 0000:03:00.1: reg 10: [mem 0xfbbfc000-0xfbbfffff]
[ 0.964677] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.964680] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
[ 0.964683] pci 0000:00:07.0: bridge window [mem 0xf8000000-0xfbbfffff]
[ 0.964688] pci 0000:00:07.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.964725] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 0.964728] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.964731] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.964737] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 0.964800] pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.964818] pci 0000:06:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
[ 0.964831] pci 0000:06:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref]
[ 0.964838] pci 0000:06:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.964876] pci 0000:06:00.0: supports D1 D2
[ 0.964877] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.964882] pci 0000:06:00.0: PME# disabled
[ 0.972675] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 0.972679] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.972682] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.972687] pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
[ 0.972759] pci 0000:05:00.0: reg 10: [mem 0xfbdff000-0xfbdff7ff 64bit]
[ 0.972766] pci 0000:05:00.0: reg 18: [io 0xd800-0xd8ff]
[ 0.972821] pci 0000:05:00.0: supports D2
[ 0.972822] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold
[ 0.972827] pci 0000:05:00.0: PME# disabled
[ 0.980671] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.980675] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.980678] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.980683] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.980791] pci 0000:04:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 0.980799] pci 0000:04:00.0: reg 30: [mem 0xfbce0000-0xfbceffff pref]
[ 0.980829] pci 0000:04:00.0: PME# supported from D3hot
[ 0.980834] pci 0000:04:00.0: PME# disabled
[ 0.980878] pci 0000:04:00.1: reg 10: [io 0xcc00-0xcc07]
[ 0.980886] pci 0000:04:00.1: reg 14: [io 0xc880-0xc883]
[ 0.980894] pci 0000:04:00.1: reg 18: [io 0xc800-0xc807]
[ 0.980902] pci 0000:04:00.1: reg 1c: [io 0xc480-0xc483]
[ 0.980911] pci 0000:04:00.1: reg 20: [io 0xc400-0xc40f]
[ 0.980969] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.980981] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.980984] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.980987] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.980992] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.981049] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.981052] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.981055] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.981060] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.981062] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.981064] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.981066] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.981068] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.981070] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.981071] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.981100] pci_bus 0000:00: on NUMA node 0
[ 0.981109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.981566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.981687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.981752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.981814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.981875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.981951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.982012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.982072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.005802] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.005909] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.006012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.006117] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.006222] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.006327] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.006431] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.006536] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.006580] HEST: Table is not found!
[ 1.006634] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.006638] vgaarb: loaded
[ 1.006743] SCSI subsystem initialized
[ 1.006873] libata version 3.00 loaded.
[ 1.006912] usbcore: registered new interface driver usbfs
[ 1.006921] usbcore: registered new interface driver hub
[ 1.006939] usbcore: registered new device driver usb
[ 1.007024] ACPI: WMI: Mapper loaded
[ 1.007025] PCI: Using ACPI for IRQ routing
[ 1.007028] PCI: pci_cache_line_size set to 64 bytes
[ 1.007118] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 1.007120] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.007181] NetLabel: Initializing
[ 1.007183] NetLabel: domain hash size = 128
[ 1.007184] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.007191] NetLabel: unlabeled traffic allowed by default
[ 1.007212] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.007217] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.007220] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.024756] Switching to clocksource tsc
[ 1.031679] AppArmor: AppArmor Filesystem Enabled
[ 1.031687] pnp: PnP ACPI init
[ 1.031696] ACPI: bus type pnp registered
[ 1.033959] pnp: PnP ACPI: found 14 devices
[ 1.033961] ACPI: ACPI bus type pnp unregistered
[ 1.033963] PnPBIOS: Disabled by ACPI PNP
[ 1.033971] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.033973] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.033975] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.033977] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.033979] system 00:01: [mem 0xfec8a000-0xfec8afff] has been reserved
[ 1.033981] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.033986] system 00:06: [io 0x0290-0x029f] has been reserved
[ 1.033990] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 1.033992] system 00:07: [io 0x0800-0x087f] has been reserved
[ 1.033994] system 00:07: [io 0x0500-0x057f] has been reserved
[ 1.033996] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.033998] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.034002] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.034007] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.034010] system 00:0b: [mem 0xfec00000-0xfec00fff] has been reserved
[ 1.034012] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.034016] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.034019] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.034021] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.034023] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.034025] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.034027] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.069489] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 1.069492] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.069495] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.069497] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.069499] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.069500] pci 0000:00:01.0: bridge window [io disabled]
[ 1.069504] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.069506] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.069511] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.069512] pci 0000:00:03.0: bridge window [io disabled]
[ 1.069515] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.069518] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.069523] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.069525] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
[ 1.069529] pci 0000:00:07.0: bridge window [mem 0xf8000000-0xfbbfffff]
[ 1.069532] pci 0000:00:07.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 1.069536] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.069539] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.069543] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.069546] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 1.069551] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.069553] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 1.069557] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.069561] pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
[ 1.069566] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 1.069568] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 1.069572] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.069575] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.069581] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 1.069583] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.069587] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.069590] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.069596] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.069597] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.069600] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.069603] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.069616] pci 0000:00:01.0: setting latency timer to 64
[ 1.069623] pci 0000:00:03.0: setting latency timer to 64
[ 1.069629] pci 0000:00:07.0: setting latency timer to 64
[ 1.069636] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.069775] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 1.069777] PCI: setting IRQ 5 as level-triggered
[ 1.069781] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 1.069785] pci 0000:00:1c.0: setting latency timer to 64
[ 1.069905] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.069907] PCI: setting IRQ 11 as level-triggered
[ 1.069911] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.069914] pci 0000:00:1c.2: setting latency timer to 64
[ 1.070034] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.070035] PCI: setting IRQ 10 as level-triggered
[ 1.070039] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 1.070042] pci 0000:00:1c.3: setting latency timer to 64
[ 1.070050] pci 0000:00:1c.4: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 1.070053] pci 0000:00:1c.4: setting latency timer to 64
[ 1.070058] pci 0000:00:1e.0: setting latency timer to 64
[ 1.070062] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.070063] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.070065] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.070067] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.070069] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.070070] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.070072] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.070074] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbbfffff]
[ 1.070076] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[ 1.070077] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.070079] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.070081] pci_bus 0000:07: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 1.070083] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 1.070084] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.070086] pci_bus 0000:06: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
[ 1.070088] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 1.070089] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.070091] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.070093] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 1.070094] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.070096] pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.070098] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.070100] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.070101] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.070103] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.070105] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.070106] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.070131] NET: Registered protocol family 2
[ 1.070173] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.070302] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.070511] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.070601] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.070603] TCP reno registered
[ 1.070605] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.070609] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.070667] NET: Registered protocol family 1
[ 1.070813] pci 0000:03:00.0: Boot video device
[ 1.070832] PCI: CLS 256 bytes, default 64
[ 1.071188] cpufreq-nforce2: No nForce2 chipset.
[ 1.071202] Scanning for low memory corruption every 60 seconds
[ 1.071269] audit: initializing netlink socket (disabled)
[ 1.071274] type=2000 audit(1325179713.828:1): initialized
[ 1.079898] highmem bounce pool size: 64 pages
[ 1.079902] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.080973] VFS: Disk quotas dquot_6.5.2
[ 1.081015] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.081418] fuse init (API version 7.14)
[ 1.081481] msgmni has been set to 1656
[ 1.131367] Freeing initrd memory: 10616k freed
[ 1.134607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.134610] io scheduler noop registered
[ 1.134611] io scheduler deadline registered
[ 1.134621] io scheduler cfq registered (default)
[ 1.134709] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.134736] alloc irq_desc for 64 on node -1
[ 1.134737] alloc kstat_irqs on node -1
[ 1.134747] pcieport 0000:00:01.0: irq 64 for MSI/MSI-X
[ 1.134802] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.134826] alloc irq_desc for 65 on node -1
[ 1.134827] alloc kstat_irqs on node -1
[ 1.134833] pcieport 0000:00:03.0: irq 65 for MSI/MSI-X
[ 1.134884] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.134909] alloc irq_desc for 66 on node -1
[ 1.134910] alloc kstat_irqs on node -1
[ 1.134915] pcieport 0000:00:07.0: irq 66 for MSI/MSI-X
[ 1.134966] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.134993] alloc irq_desc for 67 on node -1
[ 1.134995] alloc kstat_irqs on node -1
[ 1.135000] pcieport 0000:00:1c.0: irq 67 for MSI/MSI-X
[ 1.135060] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.135088] alloc irq_desc for 68 on node -1
[ 1.135089] alloc kstat_irqs on node -1
[ 1.135094] pcieport 0000:00:1c.2: irq 68 for MSI/MSI-X
[ 1.135157] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.135184] alloc irq_desc for 69 on node -1
[ 1.135185] alloc kstat_irqs on node -1
[ 1.135191] pcieport 0000:00:1c.3: irq 69 for MSI/MSI-X
[ 1.135252] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.135279] alloc irq_desc for 70 on node -1
[ 1.135280] alloc kstat_irqs on node -1
[ 1.135286] pcieport 0000:00:1c.4: irq 70 for MSI/MSI-X
[ 1.135355] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.135360] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.135363] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.135378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.135466] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.135525] intel_idle: MWAIT substates: 0x1120
[ 1.135526] intel_idle: v0.4 model 0x1A
[ 1.135527] intel_idle: lapic_timer_reliable_states 0x2
[ 1.135621] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.135625] ACPI: Power Button [PWRB]
[ 1.135656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.135658] ACPI: Power Button [PWRF]
[ 1.135964] ACPI: acpi_idle yielding to intel_idle
[ 1.138453] ERST: Table is not found!
[ 1.138469] isapnp: Scanning for PnP cards...
[ 1.138611] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.139612] brd: module loaded
[ 1.139975] loop: module loaded
[ 1.140103] pata_acpi 0000:04:00.1: enabling device (0000 -> 0001)
[ 1.140112] pata_acpi 0000:04:00.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 1.140133] pata_acpi 0000:04:00.1: setting latency timer to 64
[ 1.140145] pata_acpi 0000:04:00.1: PCI INT B disabled
[ 1.140332] Fixed MDIO Bus: probed
[ 1.140354] PPP generic driver version 2.4.2
[ 1.140377] tun: Universal TUN/TAP device driver, 1.6
[ 1.140378] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.140425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.140439] ehci_hcd 0000:00:1a.7: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.140447] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.140449] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.140471] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.140496] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.144390] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.144396] ehci_hcd 0000:00:1a.7: irq 11, io mem 0xf7fff000
[ 1.156663] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.156738] hub 1-0:1.0: USB hub found
[ 1.156741] hub 1-0:1.0: 6 ports detected
[ 1.156919] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 4
[ 1.156921] PCI: setting IRQ 4 as level-triggered
[ 1.156925] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 4 (level, low) -> IRQ 4
[ 1.156934] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.156936] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.156960] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.156982] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.160864] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.160869] ehci_hcd 0000:00:1d.7: irq 4, io mem 0xf7ffe000
[ 1.176655] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.176726] hub 2-0:1.0: USB hub found
[ 1.176728] hub 2-0:1.0: 6 ports detected
[ 1.176781] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.176790] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.176925] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 15
[ 1.176926] PCI: setting IRQ 15 as level-triggered
[ 1.176930] uhci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKA] -> GSI 15 (level, low) -> IRQ 15
[ 1.176935] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.176937] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.176962] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.176984] uhci_hcd 0000:00:1a.0: irq 15, io base 0x0000a800
[ 1.177062] hub 3-0:1.0: USB hub found
[ 1.177065] hub 3-0:1.0: 2 ports detected
[ 1.177231] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
[ 1.177232] PCI: setting IRQ 3 as level-triggered
[ 1.177236] uhci_hcd 0000:00:1a.1: PCI INT B -> Link[LNKF] -> GSI 3 (level, low) -> IRQ 3
[ 1.177241] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.177243] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.177270] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.177292] uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000a880
[ 1.177365] hub 4-0:1.0: USB hub found
[ 1.177368] hub 4-0:1.0: 2 ports detected
[ 1.177411] uhci_hcd 0000:00:1a.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 1.177416] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.177418] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.177442] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.177464] uhci_hcd 0000:00:1a.2: irq 10, io base 0x0000ac00
[ 1.177536] hub 5-0:1.0: USB hub found
[ 1.177539] hub 5-0:1.0: 2 ports detected
[ 1.177582] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 4 (level, low) -> IRQ 4
[ 1.177587] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.177589] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.177609] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.177630] uhci_hcd 0000:00:1d.0: irq 4, io base 0x0000a080
[ 1.177703] hub 6-0:1.0: USB hub found
[ 1.177706] hub 6-0:1.0: 2 ports detected
[ 1.177748] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 1.177752] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.177754] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.177775] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.177795] uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000a400
[ 1.177870] hub 7-0:1.0: USB hub found
[ 1.177872] hub 7-0:1.0: 2 ports detected
[ 1.177915] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.177919] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.177922] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.177944] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.177964] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000a480
[ 1.178037] hub 8-0:1.0: USB hub found
[ 1.178040] hub 8-0:1.0: 2 ports detected
[ 1.178125] PNP: No PS/2 controller found. Probing ports directly.
[ 1.180901] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.180906] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.180952] mice: PS/2 mouse device common for all mice
[ 1.181024] rtc_cmos 00:03: RTC can wake from S4
[ 1.181049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.181068] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.181136] device-mapper: uevent: version 1.0.3
[ 1.181210] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.181333] device-mapper: multipath: version 1.1.1 loaded
[ 1.181334] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.181410] EISA: Probing bus 0 at eisa.0
[ 1.181412] EISA: Cannot allocate resource for mainboard
[ 1.181413] Cannot allocate resource for EISA slot 1
[ 1.181415] Cannot allocate resource for EISA slot 2
[ 1.181416] Cannot allocate resource for EISA slot 3
[ 1.181417] Cannot allocate resource for EISA slot 4
[ 1.181418] Cannot allocate resource for EISA slot 5
[ 1.181420] Cannot allocate resource for EISA slot 6
[ 1.181421] Cannot allocate resource for EISA slot 7
[ 1.181422] Cannot allocate resource for EISA slot 8
[ 1.181423] EISA: Detected 0 cards.
[ 1.181758] cpuidle: using governor ladder
[ 1.182000] cpuidle: using governor menu
[ 1.182185] TCP cubic registered
[ 1.182273] NET: Registered protocol family 10
[ 1.182513] lo: Disabled Privacy Extensions
[ 1.182652] NET: Registered protocol family 17
[ 1.185223] Using IPI No-Shortcut mode
[ 1.185283] PM: Resume from disk failed.
[ 1.185291] registered taskstats version 1
[ 1.185661] Magic number: 7:945:492
[ 1.185678] pci 0000:06:00.0: hash matches
[ 1.185711] rtc_cmos 00:03: setting system clock to 2011-12-29 17:28:34 UTC (1325179714)
[ 1.185714] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.185715] EDD information not available.
[ 1.491374] isapnp: No Plug & Play device found
[ 1.491400] Freeing unused kernel memory: 688k freed
[ 1.491645] Write protecting the kernel text: 4944k
[ 1.491726] Write protecting the kernel read-only data: 1976k
[ 1.505226] udev[146]: starting version 163
[ 1.526103] Btrfs loaded
[ 1.537671] pata_jmicron 0000:04:00.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 1.537700] pata_jmicron 0000:04:00.1: setting latency timer to 64
[ 1.543483] ahci 0000:00:1f.2: version 3.0
[ 1.543519] scsi0 : pata_jmicron
[ 1.543610] scsi1 : pata_jmicron
[ 1.543673] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 14
[ 1.543676] PCI: setting IRQ 14 as level-triggered
[ 1.543681] ahci 0000:00:1f.2: PCI INT B -> Link[LNKE] -> GSI 14 (level, low) -> IRQ 14
[ 1.543711] alloc irq_desc for 71 on node -1
[ 1.543712] alloc kstat_irqs on node -1
[ 1.543719] ahci 0000:00:1f.2: irq 71 for MSI/MSI-X
[ 1.543747] ahci: SSS flag set, parallel bus scan disabled
[ 1.543784] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.543787] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.543790] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.544461] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 5
[ 1.544464] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 5
[ 1.545732] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.545749] r8169 0000:06:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.545781] r8169 0000:06:00.0: setting latency timer to 64
[ 1.545822] alloc irq_desc for 72 on node -1
[ 1.545824] alloc kstat_irqs on node -1
[ 1.545836] r8169 0000:06:00.0: irq 72 for MSI/MSI-X
[ 1.546449] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xf823e000, 48:5b:39:1d:e7:db, XID 1c4000c0 IRQ 72
[ 1.581217] scsi2 : ahci
[ 1.581331] scsi3 : ahci
[ 1.581488] scsi4 : ahci
[ 1.581603] scsi5 : ahci
[ 1.581812] scsi6 : ahci
[ 1.581898] scsi7 : ahci
[ 1.582085] ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 71
[ 1.582088] ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 71
[ 1.582090] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 71
[ 1.582092] ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 71
[ 1.582094] ata7: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 71
[ 1.582097] ata8: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 71
[ 1.582126] ahci 0000:04:00.0: PCI INT A -> Link[LNKA] -> GSI 15 (level, low) -> IRQ 15
[ 1.597079] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.597085] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.597092] ahci 0000:04:00.0: setting latency timer to 64
[ 1.597333] scsi8 : ahci
[ 1.597592] scsi9 : ahci
[ 1.597716] ata9: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 15
[ 1.597721] ata10: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 15
[ 1.868823] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 1.900777] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.916780] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.916822] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.035480] hub 6-1:1.0: USB hub found
[ 2.037452] hub 6-1:1.0: 5 ports detected
[ 2.038454] hub 6-1:1.0: insufficient power available to use all downstream ports
[ 2.236549] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.318379] usb 6-1.2: new low speed USB device using uhci_hcd and address 3
[ 2.542253] usb 6-1.5: new full speed USB device using uhci_hcd and address 4
[ 2.687591] usbcore: registered new interface driver hiddev
[ 2.700409] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input2
[ 2.700601] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[ 2.703371] input: Cherry USB-Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.5/6-1.5:1.0/input/input3
[ 2.703426] generic-usb 0003:046A:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [Cherry USB-Keyboard] on usb-0000:00:1d.0-1.5/input0
[ 2.703439] usbcore: registered new interface driver usbhid
[ 2.703441] usbhid: USB HID core driver
[ 3.148151] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.149821] ata5.00: ATAPI: Optiarc DVD RW AD-7243S, 1.03, max UDMA/100
[ 3.152077] ata5.00: configured for UDMA/100
[ 3.169547] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7243S 1.03 PQ: 0 ANSI: 5
[ 3.171398] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.171401] Uniform CD-ROM driver Revision: 3.20
[ 3.171511] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.171571] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 3.487967] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.399593] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.408072] ata7.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 4.408077] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.409943] ata7.00: configured for UDMA/133
[ 4.423765] scsi 6:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 4.423905] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4.423974] sd 6:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.424082] sd 6:0:0:0: [sda] Write Protect is off
[ 4.424087] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.424148] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.424379] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[ 4.487431] sd 6:0:0:0: [sda] Attached SCSI disk
[ 5.319180] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.332645] ata8.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 5.332649] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.334889] ata8.00: configured for UDMA/133
[ 5.348989] scsi 7:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 5.349125] sd 7:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.349164] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 5.349211] sd 7:0:0:0: [sdb] Write Protect is off
[ 5.349217] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.349256] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.349425] sdb: sdb1 sdb2 sdb3
[ 5.358772] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 5.360315] firewire_ohci 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 5.360321] firewire_ohci 0000:05:00.0: setting latency timer to 64
[ 5.452804] firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 5.475560] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5.475565] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 5.475570] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 5.475576] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 20 00 00 02 00
[ 5.475585] end_request: I/O error, dev sr0, sector 128
[ 5.475588] Buffer I/O error on device sr0, logical block 32
[ 5.475591] Buffer I/O error on device sr0, logical block 33
[ 5.477345] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5.477349] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 5.477353] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 5.477359] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 20 00 00 02 00
[ 5.477367] end_request: I/O error, dev sr0, sector 128
[ 5.477370] Buffer I/O error on device sr0, logical block 32
[ 5.477373] Buffer I/O error on device sr0, logical block 33
[ 5.479357] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5.479361] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 5.479365] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 5.479370] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 80 00 00 00 04 00
[ 5.479379] end_request: I/O error, dev sr0, sector 131072
[ 5.479382] Buffer I/O error on device sr0, logical block 32768
[ 5.479385] Buffer I/O error on device sr0, logical block 32769
[ 5.479389] Buffer I/O error on device sr0, logical block 32770
[ 5.479392] Buffer I/O error on device sr0, logical block 32771
[ 5.481328] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5.481332] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 5.481336] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 5.481342] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 80 00 00 00 01 00
[ 5.481351] end_request: I/O error, dev sr0, sector 131072
[ 5.481354] Buffer I/O error on device sr0, logical block 32768
[ 5.483306] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5.483310] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 5.483314] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 5.483319] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 80 01 00 00 01 00
[ 5.483328] end_request: I/O error, dev sr0, sector 131076
[ 5.520306] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.947943] firewire_core: created device fw0: GUID 001e8c0000d1abe0, S400
[ 11.691058] udev[500]: starting version 163
[ 11.699086] lp: driver loaded but no devices found
[ 11.718039] EDAC MC: Ver: 2.1.0 Nov 28 2011
[ 11.731037] PCI: Discovered peer bus ff
[ 11.732297] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
[ 11.732318] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[ 11.732321] EDAC i7core: Driver loaded.
[ 11.739300] Linux agpgart interface v0.103
[ 11.762931] nvidia: module license 'NVIDIA' taints kernel.
[ 11.762933] Disabling lock debugging due to kernel taint
[ 11.763098] audit_printk_skb: 1 callbacks suppressed
[ 11.763100] type=1400 audit(1325179725.076:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=719 comm="apparmor_parser"
[ 11.763538] type=1400 audit(1325179725.076:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"
[ 11.763787] type=1400 audit(1325179725.076:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
[ 11.766048] Adding 12582908k swap on /dev/sda10. Priority:-1 extents:1 across:12582908k
[ 11.840503] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 7
[ 11.840506] PCI: setting IRQ 7 as level-triggered
[ 11.840510] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 7 (level, low) -> IRQ 7
[ 11.840543] alloc irq_desc for 73 on node -1
[ 11.840544] alloc kstat_irqs on node -1
[ 11.840553] HDA Intel 0000:00:1b.0: irq 73 for MSI/MSI-X
[ 11.840571] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.883292] hda_codec: ALC1200: BIOS auto-probing.
[ 11.890073] HDA Intel 0000:03:00.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 11.890077] hda_intel: Disable MSI for Nvidia chipset
[ 11.890101] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 11.901690] Adding 12582908k swap on /dev/sda11. Priority:-2 extents:1 across:12582908k
[ 11.939984] Adding 12582908k swap on /dev/sda12. Priority:-3 extents:1 across:12582908k
[ 12.688228] nvidia 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 15 (level, low) -> IRQ 15
[ 12.688236] nvidia 0000:03:00.0: setting latency timer to 64
[ 12.688240] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.688339] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 13.215746] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.370795] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 14.060873] type=1400 audit(1325179727.376:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1079 comm="apparmor_parser"
[ 14.061445] type=1400 audit(1325179727.376:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1079 comm="apparmor_parser"
[ 14.066146] type=1400 audit(1325179727.380:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1101 comm="apparmor_parser"
[ 14.066171] type=1400 audit(1325179727.380:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1102 comm="apparmor_parser"
[ 14.066656] type=1400 audit(1325179727.380:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1102 comm="apparmor_parser"
[ 14.066933] type=1400 audit(1325179727.380:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1102 comm="apparmor_parser"
[ 14.067023] type=1400 audit(1325179727.380:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1105 comm="apparmor_parser"
[ 14.088482] ppdev: user-space parallel port driver
[ 14.096823] r8169 0000:06:00.0: eth0: link up
[ 14.096829] r8169 0000:06:00.0: eth0: link up
[ 15.784255] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 15.811547] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 17.373713] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 17.375954] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 17.534722] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 24.474650] eth0: no IPv6 routers present
[ 25.511208] spurious 8259A interrupt: IRQ7.
[ 415.655381] EXT4-fs (sda9): warning: checktime reached, running e2fsck is recommended
[ 415.657124] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 418.124866] EXT4-fs (sda7): warning: checktime reached, running e2fsck is recommended
[ 418.126653] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 418.962768] EXT4-fs (sda6): warning: checktime reached, running e2fsck is recommended
[ 418.964524] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 419.684471] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended
[ 419.687288] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 420.289646] EXT4-fs (sda3): warning: checktime reached, running e2fsck is recommended
[ 420.292538] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 421.352692] EXT4-fs (sdb3): warning: checktime reached, running e2fsck is recommended
[ 421.371181] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 422.532381] EXT4-fs (sdb2): warning: checktime reached, running e2fsck is recommended
[ 422.553156] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 423.215663] EXT4-fs (sdb1): warning: checktime reached, running e2fsck is recommended
[ 423.242487] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 683.488336] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.488342] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.488347] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.488353] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 683.488363] end_request: I/O error, dev sr0, sector 0
[ 683.488367] quiet_error: 15 callbacks suppressed
[ 683.488370] Buffer I/O error on device sr0, logical block 0
[ 683.488374] Buffer I/O error on device sr0, logical block 1
[ 683.488379] Buffer I/O error on device sr0, logical block 2
[ 683.488383] Buffer I/O error on device sr0, logical block 3
[ 683.488387] Buffer I/O error on device sr0, logical block 4
[ 683.488391] Buffer I/O error on device sr0, logical block 5
[ 683.488395] Buffer I/O error on device sr0, logical block 6
[ 683.488399] Buffer I/O error on device sr0, logical block 7
[ 683.489898] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.489903] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.489907] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.489913] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.489921] end_request: I/O error, dev sr0, sector 0
[ 683.489925] Buffer I/O error on device sr0, logical block 0
[ 683.489928] Buffer I/O error on device sr0, logical block 1
[ 683.491432] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.491436] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.491440] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.491446] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.491454] end_request: I/O error, dev sr0, sector 0
[ 683.492833] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.492837] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.492841] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.492846] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.492855] end_request: I/O error, dev sr0, sector 0
[ 683.494488] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.494492] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.494496] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.494502] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.494510] end_request: I/O error, dev sr0, sector 0
[ 683.495891] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.495895] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.495899] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.495905] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.495913] end_request: I/O error, dev sr0, sector 0
[ 683.497282] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.497286] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.497290] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.497295] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.497304] end_request: I/O error, dev sr0, sector 0
[ 683.498684] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.498689] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.498692] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.498698] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.498707] end_request: I/O error, dev sr0, sector 0
[ 683.500144] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.500148] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.500152] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.500158] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.500166] end_request: I/O error, dev sr0, sector 0
[ 683.501512] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.501518] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.501523] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.501530] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 20 00 00 02 00
[ 683.501543] end_request: I/O error, dev sr0, sector 128
[ 683.502895] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.502899] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.502903] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.502909] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.502917] end_request: I/O error, dev sr0, sector 0
[ 683.504325] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.504329] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.504333] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.504338] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.504347] end_request: I/O error, dev sr0, sector 0
[ 683.505764] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.505769] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.505773] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.505778] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.505787] end_request: I/O error, dev sr0, sector 0
[ 683.507181] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.507185] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.507189] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.507195] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.507203] end_request: I/O error, dev sr0, sector 0
[ 683.508560] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 683.508565] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 683.508569] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 683.508574] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 683.508583] end_request: I/O error, dev sr0, sector 0
[ 715.240928] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.240934] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.240939] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.240946] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.240955] end_request: I/O error, dev sr0, sector 0
[ 715.240959] quiet_error: 26 callbacks suppressed
[ 715.240962] Buffer I/O error on device sr0, logical block 0
[ 715.240966] Buffer I/O error on device sr0, logical block 1
[ 715.242333] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.242338] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.242342] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.242347] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.242356] end_request: I/O error, dev sr0, sector 0
[ 715.242359] Buffer I/O error on device sr0, logical block 0
[ 715.242362] Buffer I/O error on device sr0, logical block 1
[ 715.243878] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.243883] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.243889] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.243896] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.243908] end_request: I/O error, dev sr0, sector 0
[ 715.243912] Buffer I/O error on device sr0, logical block 0
[ 715.243917] Buffer I/O error on device sr0, logical block 1
[ 715.245261] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.245266] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.245270] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.245276] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.245284] end_request: I/O error, dev sr0, sector 0
[ 715.245288] Buffer I/O error on device sr0, logical block 0
[ 715.245291] Buffer I/O error on device sr0, logical block 1
[ 715.246647] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.246652] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.246656] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.246661] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.246670] end_request: I/O error, dev sr0, sector 0
[ 715.246673] Buffer I/O error on device sr0, logical block 0
[ 715.246676] Buffer I/O error on device sr0, logical block 1
[ 715.248041] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.248045] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.248049] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.248055] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.248064] end_request: I/O error, dev sr0, sector 0
[ 715.249508] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.249512] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.249516] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.249522] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.249530] end_request: I/O error, dev sr0, sector 0
[ 715.250900] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.250904] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.250908] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.250913] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.250922] end_request: I/O error, dev sr0, sector 0
[ 715.252280] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.252285] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.252289] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.252294] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 20 00 00 02 00
[ 715.252303] end_request: I/O error, dev sr0, sector 128
[ 715.253762] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.253767] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.253771] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.253776] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.253785] end_request: I/O error, dev sr0, sector 0
[ 715.255147] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.255152] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.255156] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.255161] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.255170] end_request: I/O error, dev sr0, sector 0
[ 715.256551] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.256555] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.256559] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.256565] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.256574] end_request: I/O error, dev sr0, sector 0
[ 715.257943] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.257947] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.257951] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.257957] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.257965] end_request: I/O error, dev sr0, sector 0
[ 715.259400] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 715.259404] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 715.259408] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 715.259413] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 715.259422] end_request: I/O error, dev sr0, sector 0
[ 815.341490] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.341496] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.341501] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.341508] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.341517] end_request: I/O error, dev sr0, sector 0
[ 815.341521] quiet_error: 18 callbacks suppressed
[ 815.341524] Buffer I/O error on device sr0, logical block 0
[ 815.341528] Buffer I/O error on device sr0, logical block 1
[ 815.342879] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.342884] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.342888] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.342893] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.342902] end_request: I/O error, dev sr0, sector 0
[ 815.342905] Buffer I/O error on device sr0, logical block 0
[ 815.342908] Buffer I/O error on device sr0, logical block 1
[ 815.344331] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.344336] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.344340] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.344346] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.344355] end_request: I/O error, dev sr0, sector 0
[ 815.344358] Buffer I/O error on device sr0, logical block 0
[ 815.344362] Buffer I/O error on device sr0, logical block 1
[ 815.345768] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.345772] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.345776] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.345781] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.345790] end_request: I/O error, dev sr0, sector 0
[ 815.345793] Buffer I/O error on device sr0, logical block 0
[ 815.345796] Buffer I/O error on device sr0, logical block 1
[ 815.347180] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.347186] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.347192] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.347200] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.347213] end_request: I/O error, dev sr0, sector 0
[ 815.347217] Buffer I/O error on device sr0, logical block 0
[ 815.347222] Buffer I/O error on device sr0, logical block 1
[ 815.348706] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.348711] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.348715] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.348720] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.348729] end_request: I/O error, dev sr0, sector 0
[ 815.350085] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.350089] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.350093] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.350099] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.350107] end_request: I/O error, dev sr0, sector 0
[ 815.351569] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.351574] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.351578] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.351583] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.351592] end_request: I/O error, dev sr0, sector 0
[ 815.352948] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.352952] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.352956] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.352961] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 20 00 00 02 00
[ 815.352970] end_request: I/O error, dev sr0, sector 128
[ 815.354324] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.354330] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.354336] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.354343] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.354355] end_request: I/O error, dev sr0, sector 0
[ 815.355768] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.355772] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.355777] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.355782] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.355791] end_request: I/O error, dev sr0, sector 0
[ 815.357154] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.357158] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.357162] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.357168] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.357177] end_request: I/O error, dev sr0, sector 0
[ 815.358533] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.358537] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.358541] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.358547] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.358555] end_request: I/O error, dev sr0, sector 0
[ 815.359916] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 815.359920] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 815.359925] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 815.359930] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 815.359939] end_request: I/O error, dev sr0, sector 0
[ 1318.559013] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1318.705557] Initializing USB Mass Storage driver...
[ 1318.705723] scsi10 : usb-storage 1-3:1.0
[ 1318.705951] usbcore: registered new interface driver usb-storage
[ 1318.705954] USB Mass Storage support registered.
[ 1319.703647] scsi 10:0:0:0: Direct-Access Verbatim STORE N GO 0.00 PQ: 0 ANSI: 2
[ 1319.704790] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 1319.706383] sd 10:0:0:0: [sdc] 7845888 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 1319.706916] sd 10:0:0:0: [sdc] Write Protect is off
[ 1319.706920] sd 10:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 1319.706922] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 1319.710210] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 1319.710216] sdc: sdc1
[ 1319.945338] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 1319.945343] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 2371.482879] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.482885] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.482890] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.482896] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.482906] end_request: I/O error, dev sr0, sector 0
[ 2371.482910] quiet_error: 18 callbacks suppressed
[ 2371.482913] Buffer I/O error on device sr0, logical block 0
[ 2371.482917] Buffer I/O error on device sr0, logical block 1
[ 2371.484355] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.484359] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.484363] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.484369] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.484377] end_request: I/O error, dev sr0, sector 0
[ 2371.484381] Buffer I/O error on device sr0, logical block 0
[ 2371.484384] Buffer I/O error on device sr0, logical block 1
[ 2371.485739] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.485743] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.485747] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.485753] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.485762] end_request: I/O error, dev sr0, sector 0
[ 2371.485765] Buffer I/O error on device sr0, logical block 0
[ 2371.485768] Buffer I/O error on device sr0, logical block 1
[ 2371.487103] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.487109] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.487115] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.487123] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.487136] end_request: I/O error, dev sr0, sector 0
[ 2371.487140] Buffer I/O error on device sr0, logical block 0
[ 2371.487145] Buffer I/O error on device sr0, logical block 1
[ 2371.488664] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.488668] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.488672] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.488678] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.488687] end_request: I/O error, dev sr0, sector 0
[ 2371.488690] Buffer I/O error on device sr0, logical block 0
[ 2371.488693] Buffer I/O error on device sr0, logical block 1
[ 2371.490056] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.490061] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.490065] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.490070] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.490079] end_request: I/O error, dev sr0, sector 0
[ 2371.491414] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.491419] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.491423] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.491428] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.491437] end_request: I/O error, dev sr0, sector 0
[ 2371.492819] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.492823] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.492827] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.492833] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.492841] end_request: I/O error, dev sr0, sector 0
[ 2371.494299] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.494303] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.494307] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.494313] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 20 00 00 02 00
[ 2371.494322] end_request: I/O error, dev sr0, sector 128
[ 2371.495754] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.495758] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.495763] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.495768] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.495777] end_request: I/O error, dev sr0, sector 0
[ 2371.497124] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.497128] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.497132] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.497138] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.497146] end_request: I/O error, dev sr0, sector 0
[ 2371.498733] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.498739] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.498745] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.498752] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.498764] end_request: I/O error, dev sr0, sector 0
[ 2371.500169] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.500174] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.500179] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.500184] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.500193] end_request: I/O error, dev sr0, sector 0
[ 2371.501548] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2371.501552] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 2371.501556] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2371.501561] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2371.501569] end_request: I/O error, dev sr0, sector 0
dmesg | grep usb
[ 1.006912] usbcore: registered new interface driver usbfs
[ 1.006921] usbcore: registered new interface driver hub
[ 1.006939] usbcore: registered new device driver usb
[ 1.868823] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 2.318379] usb 6-1.2: new low speed USB device using uhci_hcd and address 3
[ 2.542253] usb 6-1.5: new full speed USB device using uhci_hcd and address 4
[ 2.687591] usbcore: registered new interface driver hiddev
[ 2.700409] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input2
[ 2.700601] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[ 2.703371] input: Cherry USB-Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.5/6-1.5:1.0/input/input3
[ 2.703426] generic-usb 0003:046A:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [Cherry USB-Keyboard] on usb-0000:00:1d.0-1.5/input0
[ 2.703439] usbcore: registered new interface driver usbhid
[ 2.703441] usbhid: USB HID core driver
[ 1318.559013] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1318.705723] scsi10 : usb-storage 1-3:1.0
[ 1318.705951] usbcore: registered new interface driver usb-storage
dmidecode
# dmidecode 2.9
SMBIOS 2.5 present.
79 structures occupying 3022 bytes.
Table at 0x000F06F0.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 0805
Release Date: 02/24/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 2048 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 8.15
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: System manufacturer
Product Name: System Product Name
Version: System Version
Serial Number: System Serial Number
UUID: E005001E-8C00-00D1-ABE0-485B391DE7DB
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: P6T SE
Version: Rev 1.xx
Serial Number: 104279870000155
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: Chassis Manufacture
Type: Desktop
Lock: Not Present
Version: Chassis Version
Serial Number: Chassis Serial Number
Asset Tag: Asset-1234567890
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000001
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: LGA1366
Type: Central Processor
Family: <OUT OF SPEC>
Manufacturer: Intel
ID: A5 06 01 00 FF FB EB BF
Version: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
Voltage: 1.2 V
External Clock: 133 MHz
Max Speed: 2666 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 4
Core Enabled: 4
Thread Count: 8
Characteristics:
64-bit capable
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 256 KB
Maximum Size: 256 KB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Parity
System Type: Instruction
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 8192 KB
Maximum Size: 8192 KB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 16-way Set-associative
Handle 0x0008, DMI type 5, 28 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 24576 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 6
0x0009
0x000A
0x000B
0x000C
0x000D
0x000E
Enabled Error Correcting Capabilities:
None
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 1
Current Speed: 1 ns
Type: DIMM
Installed Size: 2048 MB (Single-bank Connection)
Enabled Size: 2048 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 0 0
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 3
Current Speed: 1 ns
Type: DIMM
Installed Size: 2048 MB (Single-bank Connection)
Enabled Size: 2048 MB (Single-bank Connection)
Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: 0 0
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000D, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM4
Bank Connections: 5
Current Speed: 1 ns
Type: DIMM
Installed Size: 2048 MB (Single-bank Connection)
Enabled Size: 2048 MB (Single-bank Connection)
Error Status: OK
Handle 0x000E, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM5
Bank Connections: 0 0
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Keyboard
Internal Connector Type: None
External Reference Designator: PS/2 Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB12
Internal Connector Type: None
External Reference Designator: USB12
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB34
Internal Connector Type: None
External Reference Designator: USB34
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB56
Internal Connector Type: None
External Reference Designator: USB56
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB78
Internal Connector Type: None
External Reference Designator: USB78
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: IE1394_1
Internal Connector Type: None
External Reference Designator: IEEE1394 1
External Connector Type: IEEE 1394
Port Type: Firewire (IEEE P1394)
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ESATA
Internal Connector Type: None
External Reference Designator: ESATA
External Connector Type: IEEE 1394
Port Type: SATA
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LAN
Internal Connector Type: None
External Reference Designator: GbE LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: AUDIO
Internal Connector Type: None
External Reference Designator: AUDIO
External Connector Type: Other
Port Type: Audio Port
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Audio Line Out1
Internal Connector Type: None
External Reference Designator: Audio Line Out1
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Audio Line Out2
Internal Connector Type: None
External Reference Designator: Audio Line Out2
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Audio Line Out3
Internal Connector Type: None
External Reference Designator: Audio Line Out3
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Audio Line Out4
Internal Connector Type: None
External Reference Designator: Audio Line Out4
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Audio Line Out5
Internal Connector Type: None
External Reference Designator: Audio Line Out5
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Audio Line Out6
Internal Connector Type: None
External Reference Designator: Audio Line Out6
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA1
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA2
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA3
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA4
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA5
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0024, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0025, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA_E1
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0026, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA_E2
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0027, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRI_EIDE
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0028, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FLOPPY
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0029, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB910
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x002A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1112
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x002B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: IE1394_2
Internal Connector Type: IEEE 1394
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Firewire (IEEE P1394)
Handle 0x002C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CD
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x002D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: AAFP
Internal Connector Type: Mini Jack (headphones)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x002E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CPU_FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PWR_FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0030, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CHA_FAN1
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0031, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CHA_FAN2
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0032, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SPDIF_OUT
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0033, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FP_AUDIO
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0034, DMI type 9, 13 bytes
System Slot Information
Designation: PCIEX16_1
Type: 32-bit PCI Express
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0035, DMI type 9, 13 bytes
System Slot Information
Designation: PCIEX1_1
Type: 32-bit PCI Express
Current Usage: Available
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0036, DMI type 9, 13 bytes
System Slot Information
Designation: PCIEX16_2
Type: 32-bit PCI Express
Current Usage: Available
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0037, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 4
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0038, DMI type 9, 13 bytes
System Slot Information
Designation: PCIEX16_3
Type: 32-bit PCI Express
Current Usage: In Use
Length: Short
ID: 5
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0039, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 6
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x003A, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Onboard Ethernet
Handle 0x003B, DMI type 11, 5 bytes
OEM Strings
String 1: To Be Filled By O.E.M.
String 2: To Be Filled By O.E.M.
String 3: To Be Filled By O.E.M.
String 4: To Be Filled By O.E.M.
Handle 0x003C, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 6
en|US|iso8859-1
zh|ZH|iso8859-1
de|DE|iso8859-1
cn|CN|iso8859-1
fr|FR|iso8859-1
ja|JP|unicode-1
Currently Installed Language: en|US|iso8859-1
Handle 0x003D, DMI type 15, 55 bytes
System Event Log
Area Length: 1008 bytes
Header Start Offset: 0x2010
Data Start Offset: 0x2010
Access Method: OEM-specific
Access Address: Unknown
Status: Valid, Not Full
Change Token: 0x00000000
Header Format: No Header
Supported Log Type Descriptors: 1
Descriptor 1: OEM-specific
Data Format 1: POST results bitmap
Handle 0x003E, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Multi-bit ECC
Maximum Capacity: 24 GB
Error Information Handle: Not Provided
Number Of Devices: 6
Handle 0x003F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Array Handle: 0x003E
Partition Width: 0
Handle 0x0040, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x003E
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: Other
Type Detail: Other
Speed: 1066 MHz (0.9 ns)
Manufacturer: Manufacturer00
Serial Number: SerNum00
Asset Tag: AssetTagNum0
Part Number: ModulePartNumber00
Handle 0x0041, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0040
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: 1
Interleave Position: Unknown
Interleaved Data Depth: 2
Handle 0x0042, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x003E
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK1
Type: Other
Type Detail: Other
Speed: Unknown
Manufacturer: Manufacturer01
Serial Number: SerNum01
Asset Tag: AssetTagNum1
Part Number: ModulePartNumber01
Handle 0x0043, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0042
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: 1
Interleave Position: Unknown
Interleaved Data Depth: 2
Handle 0x0044, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x003E
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: DIMM2
Bank Locator: BANK2
Type: Other
Type Detail: Other
Speed: 1066 MHz (0.9 ns)
Manufacturer: Manufacturer02
Serial Number: SerNum02
Asset Tag: AssetTagNum2
Part Number: ModulePartNumber02
Handle 0x0045, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0044
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: 1
Interleave Position: Unknown
Interleaved Data Depth: 2
Handle 0x0046, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x003E
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM3
Bank Locator: BANK3
Type: Other
Type Detail: Other
Speed: Unknown
Manufacturer: Manufacturer03
Serial Number: SerNum03
Asset Tag: AssetTagNum3
Part Number: ModulePartNumber03
Handle 0x0047, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0046
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: 1
Interleave Position: Unknown
Interleaved Data Depth: 2
Handle 0x0048, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x003E
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: DIMM4
Bank Locator: BANK4
Type: Other
Type Detail: Other
Speed: 1066 MHz (0.9 ns)
Manufacturer: Manufacturer04
Serial Number: SerNum04
Asset Tag: AssetTagNum4
Part Number: ModulePartNumber04
Handle 0x0049, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0048
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: 1
Interleave Position: Unknown
Interleaved Data Depth: 2
Handle 0x004A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x003E
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM5
Bank Locator: BANK5
Type: Other
Type Detail: Other
Speed: Unknown
Manufacturer: Manufacturer05
Serial Number: SerNum05
Asset Tag: AssetTagNum5
Part Number: ModulePartNumber05
Handle 0x004B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x004A
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: 1
Interleave Position: Unknown
Interleaved Data Depth: 2
Handle 0x004C, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x004D, DMI type 139, 94 bytes
OEM-specific Type
Header and Data:
8B 5E 4D 00 00 1E 8C 00 00 D1 AB E0 04 04 32 55
F8 00 A2 02 A1 00 40 63 43 10 84 83 03 DF 40 80
00 20 00 73 3C 10 08 00 60 0F 43 10 15 04 20 00
3C 10 00 00 00 43 10 00 00 00 00 00 00 00 00 00
00 00 00 00 E0 AB D1 FF FF 8C 1E 00 04 00 00 23
33 00 00 00 00 00 00 00 00 00 00 00 00 01
Strings:
V1394GUID
Handle 0x004E, DMI type 127, 4 bytes
End Of Table
lsusb -v
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-31-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-31-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 006 Device 004: ID 046a:0001 Cherry GmbH My3000 Keyboard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046a Cherry GmbH
idProduct 0x0001 My3000 Keyboard
bcdDevice 2.15
iManufacturer 1 Cherry
iProduct 2 USB-Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 64
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 006 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc03e Premium Optical Wheel Mouse (M-BT58)
bcdDevice 20.00
iManufacturer 1 Logitech
iProduct 2 USB-PS/2 Optical Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 50
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 006 Device 002: ID 046a:0003 Cherry GmbH My3000 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x046a Cherry GmbH
idProduct 0x0003 My3000 Hub
bcdDevice 2.15
iManufacturer 1 Cherry
iProduct 2 USB-Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x0004
Ganged power switching
Compound device
Ganged overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x20
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0303 lowspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0103 power enable connect
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-31-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-31-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-31-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-31-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-31-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 002: ID 18a5:0304 Verbatim, Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x18a5 Verbatim, Ltd
idProduct 0x0304
bcdDevice 1.00
iManufacturer 1 Verbatim
iProduct 2 STORE N GO
iSerial 3 1913cf43a6a216
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-31-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
j'ai encore lshw et hardinfo, mais j'ai pas réussi à renvoyer vers un fichier texte du coup je les ai en html et ça prend bcp de place.
#10 Re : -1 » Lenteur des transferts USB » Le 04/01/2012, à 16:52
- eltopo
- Réponses : 855
super. merci t-shirtman! je pense que ta technique va me permettre d'avoir des logs complets, j'ai la sensation que tout ne s'affiche pas dans ma console quand je lance une commande (j'arrive pas à remonter jusqu'à l'invit de commande précédente).
j'ai un peu moins de temps mais je continue. Il m'a semblé avoir d'autres problèmes sur mon ordi en parcourant ces différents logs (il y a plusieurs sections en rouge dans la version html de mon lshw). ça doit être dû à mon partitionnement chaotique (un jour j'ai voulu faire du multi-boot et ça c'est pas très bien passé...). j'ai aussi l'impression que toute ma RAM n'est pas reconnue (je suis censé en avoir 6 giga). je vais commencer par mettre de l'ordre à ce niveau pour voir si ça aide. il faut peut-être aussi que je passe en 64 bit (j'avais lu que le 64 bit ça foutait la merde, mais j'ai jamais essayé pour voir).
petite remarque au passage, en fait avec un dd externe la vitesse d'écriture est plutôt correcte, ya vraiment qu'avec la clé usb que ça foire, donc sur ce point je rejoins d'autres qui ont le même phénomène sur ce topic.
je reviens quand j'aurais du neuf
#11 Re : -1 » Commande groupée de Raspberry Pi et idées. » Le 20/12/2012, à 22:01
- eltopo
- Réponses : 1 347
Salut,
j'ai passé les 3 derniers jours à lire (parfois survoler) les 51 pages de ce fil.
j'ai pas encore la bête mais je vais la commander sous peu.
au début de ce fil il est souvent fait allusion à une page wiki en français. le lien qui est donné dans le premier post est mort. le projet est tombé à l'eau? c'est dommage parce que déjà rien que ce fil donne beaucoup d'informations, mais c'est un peu pénible pour chercher...
a+
Edit: question matériel au passage. quelqu'un sait si ce genre d'écran tactile "seulement usb" est supporté? il me semble que c'est la marque la plus souvent citée en rapport avec le raspberry, mais pour j'ai surtout vu des infos relatives aux modèles avec sorties vidéo hdmi, dvi et composite.
http://www.lilliputuk.com/monitors/usb/um80/
merci
#12 Re : -1 » Commande groupée de Raspberry Pi et idées. » Le 29/12/2012, à 17:10
- eltopo
- Réponses : 1 347
Salut,
j'ai continué de chercher pour un écran de contrôle, j'ai trouvé ces 4.
-Lilliput UM 70 http://www.lilliput.cn/UM-70.html
-Lilliput UM 80 http://www.lilliput.cn/UM-80.html
-Mimo 710-S http://www.mimomonitors.com/products/mimo-710-s
-Mimo 720S http://www.mimomonitors.com/products/mimo-720-s
ce qui me retient un peu c'est ce "tout usb", j'ai pas vraiment trouvé d'info disant que c'était supporté. peut-être que je devrais plutôt utiliser ceux avec une entrée composite.
#13 -1 » [Résolu] W8.1 démarre directement après installation en dual boot » Le 18/10/2014, à 20:21
- eltopo
- Réponses : 2
Bonjour,
La doc "cohabitation_ubuntu_windows" dit qu'il faut ouvrir un nouveau fil au cas où windows démarre directement après l'instalation d'ubuntu (xubuntu 14.04 dans mon cas) et qu'il faut poster le lien de son boot-repair. voilà: http://paste.ubuntu.com/8586212/
j'ai un toshiba satellite nb10-a-10u avec windows 8.1 pré-installé. J'ai suivi les instructions concernant le démarrage rapide et la secure-boot sous windows avant de passer à l'installation.
J'attends vos recommandations avant de toucher quoique ce soit, cette histoire de UEFI c'est nouveau pour moi et j'ai encore un peu de peine à comprendre les tenants et les aboutissants.
Merci d'avance!
#14 Re : -1 » [Résolu] W8.1 démarre directement après installation en dual boot » Le 19/10/2014, à 11:25
- eltopo
- Réponses : 2
Merci pour le lien, ça marche super bien!
Tout est réglé, je marque le fil comme résolu.
Encore merci et bon dimanche!
#15 -1 » nexus 10 ou samsung galaxy note 10.1 pour ubuntu 13.10? » Le 19/10/2013, à 21:38
- eltopo
- Réponses : 4
Salut,
J'envisage depuis quelques mois de rentrer dans le monde de la tablette. et là avec le sortie de la 13.10 l'envie ce fait plus pressante.
Je connais pas très bien le milieu "tablette", mais sur ce que j'ai trouvé je penche vers soit la nexus 10, soit la galaxy note 10.1 (sur laquelle il semble qu'il était déjà possible d'installer ubuntu depuis http://askubuntu.com/questions/275735/h … th-ubuntu).
quelqu'un a des retours d'expériences (je sais la 13.10 est dehors que depuis 2 jours, mais bon...)?
d'autres modèles de tablettes équivalentes à suggérer (je veux au moins un port usb)?
Merci d'avance!
eltopo
#16 Re : -1 » nexus 10 ou samsung galaxy note 10.1 pour ubuntu 13.10? » Le 20/10/2013, à 12:39
- eltopo
- Réponses : 4
merci mais le lien est mort...
ouais, j'arrive peut-être un peu tôt avec ma question. pour l'instant dans ce que je trouve sur mes recherches, c'est beaucoup de gens qui bricolent pour des trucs plus ou moins stables et pas complètement opérationnels.
Ce qui finalement n'est pas la mort, si on peut avoir un dual-boot. les problèmes finiront bien pas se résorber à mesure que des progrès son fait. le problème c'est de savoir si on s'achète une machine aujourd'hui est-ce qu'elle sera un peu mieux supportée dans les mois à venir.
je m'étais orienté sur ces deux parce que, pour la 13.10 ça parle que de supporter les produits google et que pour la galaxy note, il y a déjà des gens qui installaient ubuntu à l'époque de la 11.10.
après je sais pas non plus si il y a d'autres machines qui font tout aussi bien l'affaire? je suppose qu'à terme toutes les machines qui se sont bien vendues et qui ne posent matériellement pas de problèmes majeurs seront supportées.
[edit]
au passage ces deux autres ont l'air pas mal non plus et sont sensiblement moins chères:
Toshiba eXcite Pro AT10LE-A-10D
Asus Memo Pad FHD
#17 Re : -1 » nexus 10 ou samsung galaxy note 10.1 pour ubuntu 13.10? » Le 20/10/2013, à 17:14
- eltopo
- Réponses : 4
merci, bah ça fait toujours ça de plus à lire
Ce que je trouve difficile avec le choix d'une tablette sur laquelle on pourrait maintenant (ou dans un avenir pas trop lointain) faire un dual-boot avec le système d'origine et ubuntu, c'est de savoir quelles marques (voire modèles) sont considérées comme "pas trop mal supportées" parce que c'est celles vers lesquelles la communauté s'oriente et qui ne sont pas trop truffées des "trucs exotiques" qui compliquent trop les choses (sans que je sois capable d'identifier ces "trucs exotiques"). pour l'instant nexus et samsung ont l'air d'être pas trop mal positionnés (quoique suivant le modèle ça à l'air de pouvoir tout changer), sauf que ces 2 là sont quand même un peu plus chers que d'autres qui ont l'air d'être équivalent (après si il y a que ça tant pis, faut mettre le prix).
quand je veux m'acheter un nouvel ordinateur je fais un tour sur quelques pages et je trouve tout suite les infos qui me disent quel matériel éviter et lequel privilégier (et la marge est assez grande pour avoir des gammes de prix et performances suffisamment variables). Pour ce qui est des tablettes je trouve pas grand chose de révélant. mais bon, faut continuer à chercher
[edit]
j'ai au moins trouvé les spécifications requises pour une tablette: http://www.ubuntu.com/tablet/operators-and-oems
#18 Re : -1 » Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus » Le 20/09/2012, à 18:06
- eltopo
- Réponses : 2 641
Salut,
Installé aujourd'hui d'après le tuto sur un lenovo T430 sous ubuntu 12.04
aucune erreur, tout semble fonctionner.
un très grand merci aux devs et tout spécialement à ArchangeGabriel pour ce fil!
Edit: si il y a besoin de moi pour faire des tests (maintenant ou plus tard), m'envoyer un email.
#19 Re : -1 » Unity disparu à cause de bumblebe... » Le 21/09/2012, à 17:44
- eltopo
- Réponses : 2
T'es aller voir sur ce fil? http://forum.ubuntu-fr.org/viewtopic.php?id=565321&p=1
a+
#20 -1 » [Résolu] perte de /home après installation mutliboot » Le 04/03/2012, à 17:30
- eltopo
- Réponses : 8
Bonjour à tou-te-s,
J'ai voulu installer différentes distros sur mon ordi (j'ai pas encore fini...). après avoir installé la 2ème distro, j'ai voulu voir comment ça se présentait. donc l'ordinateur démarre normalement, mais après un moment il me dit que lecteur de disque /home n'est pas encore pret ou n'est pas present.
avec la possibilité de passer en manuel ou de sauter cette étape, ce qui m'amène sur un bureau complétement vide ou je ne peux rien faire (ce qui me semble logique vu que c'est /home qui contient tout).
j'ai fait un petit tour sur google et j'ai trouvé que le numéro UUID pouvait en être la cause. je jette un coup d'oeil dans /etc/fstab et fait un blkid pour comparer et effectivement les numéros ne correspondent pas. je modifie donc mon /etc/fstab avec nano, redémarre l'ordi, mais le problème est toujours là.
voilà mon partitionnement:
/dev/sda1: LABEL="grub" UUID="836947c4-fd57-47ab-b123-20f3d0560890" TYPE="ext4". c'est là que j'ai installé le boot d'ubuntu (10.10)
/dev/sda5: UUID="ab165004-eed4-4a1d-b37f-3c74aff7da8" TYPE="ext4". c'est là que j'ai installé la racine d'ubuntu (10.10)
/dev/sda6: UUID="245cc3fd-64bb-4e70-80aa-e42bfd8f4e73 TYPE="etx4". c'est là que j'ai installé le /home d'ubuntu (10.10)
/dev/sda7: UUID="af918e48-a85d-4385-8009-76fc473f5474" TYPE="ext4". c'est là que j'ai installé la racine de hybryde et le boot d'hybryde
/dev/sda8: UUID="d0becf15-9a1b-4730-b017-32d9904da475" TYPE="ext4". c'est là que j'ai installé le /home de hybryde
/dev/sda9: UUID="da7b4c56-ea63-4236-adae-d7abe2a1f1a7" TYPE="ext4". c'est là que je vais installer la racine de tango studio et son boot
/dev/sda10: UUID="66eaa7cc-e1b2-480d-8d9b-e76173c0ffc7" TYPE="ext4*. c'est là que je vais installer le /home de tango studio
/dev/sda11: UUID="924ea23b-947d-4eba-a297-3d99e7c7dc67" TYPE="ext4". c'est là que j'ai installé la racine de fedora 16 et son boot
/dev/sda12: UUID="cdca14e2-4f34-4f80-9f1e-a7a8447aa833" TYPE="ext4". c'est là que j'ai installé le /home de fedora 16
/dev/sda13: UUID="e3e5e5a8-b76c-4e63-b1ea-6bdfe835c71e" TYPE="ext4". c'est là que je vais installer la racine de gentoo 2012
/dev/sda14: UUID="af9909f4-c839-4a60-ba75-f316882ad9c9" TYPE="ext4". c'est là que je vais installer le /home de gentoo 2012
/dev/sda15: LABEL="main data" UUID="805e48bd-094b-435f-986e-1d11b721d3fa" TYPE="ext4". c'est là que seront mes données
/dev/sda16: UUID="5b2ec142-db63-4aa1-94ce-bd7c948b63d7" TYPE="swap". là c'est le swap
j'ai pensé que ça pouvait être une question de droits. mais quand j'essaye de faire ls -l /home/mon_nom_d'utilisateur (en root) pour voir ce qu'il en est, j'ai ça comme réponse: ls: cannot acces /home/mon_nom_d'utilisateur: No such file or directory
l'autre truc bizare, c'est qu'au démarrage, grub (version 1.98+20100804-5ubuntu3.3) m'offre de choisir entre ubuntu, with linux 2.6.35-32-generic (+ le même en recovery mode) et ubuntu with linux 2.6.35-22-generic (+ le même en recovery mode), mais quel que soit celui que je choisisse c'est ubuntu 10.10 qui démarre, jamais hybryde. et fedora (je l'ai installé avant de poster ici pour voir si ça débloquait quelque chose, mais aucun changement à signaler) qui est déjà installé n'est jamais mentioné.
j'ai certainement loupé une étape, mais je vois pas laquelle.
merci d'avance pour l'aide, je continue de chercher de mon côté
p.s. j'écris depuis un autre ordinateur, le premier étant inutilisable
#21 Re : -1 » [Résolu] perte de /home après installation mutliboot » Le 04/03/2012, à 17:56
- eltopo
- Réponses : 8
voilà
proc /proc proc nodfev, noexec, nosuid 0 0
# / was on /dev/sda5 during installation
UUID=ab165004-eed4-4a1d-b37f-3c7e4aff7da8 / ext4 errors=remoun$
# /home was on /dev/sda6 during installation
UUID=245cc3fd-64bb-4e7080aa-e42bfd8f473 /home ext4 defaults $
# swap was on /dev/sda16 during installation
UUID=805e48bd-094b-435f-986e-1d11b721d3fa none swap sw $
#22 Re : -1 » [Résolu] perte de /home après installation mutliboot » Le 04/03/2012, à 18:33
- eltopo
- Réponses : 8
j'ai modifié l'UUID du swap
argh, pour un caractère, j'avais pas vu, merci. UUID de /home également corrigé
youpi, un pas plus loin. j'arrive à la fenêtre de connexion, je peux rentrer mon mot de passe, mais ensuite j'ai une fenêtre qui s'ouvre où il est écrit:
Could not update ICEauthority file /home/mon_nom_d'utilisateur/.ICEauthority
suivi d'une autre fenêtre:
Il y a un problème avec les serveur de configuartion. (/usr/lib/libgconf2-4/gconf-sanity-check-2 a quitté avec l'état 256)
suivi d'encore une fenètre:
Nautilus ne peut pas créer les dossiers requis suivants: /home/mon_nom_d'utilisateur/Desktop,/home/mon_nom_d'utilisateur/.nautilus.
ensuite il me dit de créer ces dossiers ou de définir les partitions
je vais voir ce que je trouve à ce propos, mais si tu as déjà une idée précise je prends.
edit: je crois que j'ai trouvé.
/home appartient à root: drwxr-xr-x 24 root root
je vais essayer de changer ça.
p.s. les étiquettes, c'est avec GParted que je les mets?
#23 Re : -1 » [Résolu] perte de /home après installation mutliboot » Le 04/03/2012, à 18:57
- eltopo
- Réponses : 8
problème résolu!
j'ai fait un
sudo chown mon_nom_d'utilisateur /home
et un
chgrp mon_nom_d'utilisateur /home
je sais pas si c'est très orthodoxe comme manière de faire mais ça semble fonctionner.
je vais mettre "résolu" dans le titre.
juste une question au passage. pourquoi est-ce que j'ai le choix pour 2 versions d'ubuntu 10.10? si une me sert à rien comment je la supprime?
merci beaucoup pour ton aide. c'était un truc bête, mais parfois avoir une 2ème paires d'yeux c'est ce qui fait la différence.
passe une bonne fin de journée
p.s. je vais pouvoir continuer mes installations du coup. youpi!
edit: pour répondre à ta question. je essayé plusieurs manips il y a 2 jours, mais il ne me semble pas l'avoir copié ni déplacé (j'ai pas fait de cp et je sais pas déplacer un fichier...). du moins pas volontairement. qu'est-ce qui te fait dire ça?
du coup je mets résolu ou pas?
#24 Re : -1 » [Résolu] perte de /home après installation mutliboot » Le 04/03/2012, à 23:36
- eltopo
- Réponses : 8
encore merci pour toutes ces précisions