Ubuntu-fr

sudo parted -l

no talloc stackframe at ../source3/param/loadparm.c:4864, leaking memory
Modèle: ATA WDC WD3200AAJS-0 (scsi)
Disque /dev/sda : 320GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos

Numéro  Début   Fin    Taille  Type      Système de fichiers  Fanions
 1      32,3kB  314GB  314GB   primary   ext4                 démarrage
 2      314GB   320GB  6185MB  extended
 5      314GB   320GB  6185MB  logical   linux-swap(v1)


Modèle: ATA ST380013AS (scsi)
Disque /dev/sdb : 80,0GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos

Numéro  Début   Fin     Taille  Type     Système de fichiers  Fanions
 1      32,3kB  80,0GB  80,0GB  primary  ntfs                 démarrage


Modèle: SAMSUNG HM320II (scsi)
Disque /dev/sdg : 320GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos

Numéro  Début   Fin    Taille  Type     Système de fichiers  Fanions
 1      1049kB  210MB  209MB   primary  ntfs                 démarrage
 2      210MB   306GB  306GB   primary
 3      306GB   320GB  13,6GB  primary  ntfs

df -h

Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda1          288G    237G   37G  87% /
none               4,0K       0  4,0K   0% /sys/fs/cgroup
udev               995M    4,0K  995M   1% /dev
tmpfs              202M    2,0M  200M   1% /run
none               5,0M       0  5,0M   0% /run/lock
none              1008M    596K 1008M   1% /run/shm
none               100M     60K  100M   1% /run/user
/dev/sdg1          199M    2,5M  197M   2% /media/pasco/0878DAFB19B8427E

chkdsk sdg: /r

<?php
/***
 * WordPress's Debianised default master config file
 * Please do NOT edit and learn how the configuration works in
 * /usr/share/doc/wordpress/README.Debian
 ***/

/* Look up a host-specific config file in
 * /etc/wordpress/config-<host>.php or /etc/wordpress/config-<domain>.php
 */
$debian_server = preg_replace('/:.*/', "", $_SERVER['HTTP_HOST']);
$debian_server = preg_replace("/[^a-zA-Z0-9.\-]/", "", $debian_server);
$debian_file = '/etc/wordpress/config-'.strtolower($debian_server).'.php';
/* Main site in case of multisite with subdomains */
$debian_main_server = preg_replace("/^[^.]*\./", "", $debian_server);
$debian_main_file = '/etc/wordpress/config-'.strtolower($debian_main_server).'.php';

if (file_exists($debian_file)) {
    require_once($debian_file);
    define('DEBIAN_FILE', $debian_file);
} elseif (file_exists($debian_main_file)) {
    require_once($debian_main_file);
    define('DEBIAN_FILE', $debian_main_file);
} elseif (file_exists("/etc/wordpress/config-default.php")) {
    require_once("/etc/wordpress/config-default.php");
    define('DEBIAN_FILE', "/etc/wordpress/config-default.php");
} else {
    header("HTTP/1.0 404 Not Found");
    echo "Neither <b>$debian_file</b> nor <b>$debian_main_file</b> could be found. <br/> Ensure one of them exists, is readable by the webserver and contains the right password/username.";
    exit(1);
}

/* Default value for some constants if they have not yet been set
   by the host-specific config files */
if (!defined('ABSPATH'))
    define('ABSPATH', '/usr/share/wordpress/');
if (!defined('WP_CORE_UPDATE'))
    define('WP_CORE_UPDATE', false);
if (!defined('WP_ALLOW_MULTISITE'))
    define('WP_ALLOW_MULTISITE', true);
if (!defined('DB_NAME'))
    define('DB_NAME', 'wordpress');
if (!defined('DB_USER'))
    define('DB_USER', 'wordpress');
if (!defined('DB_HOST'))
    define('DB_HOST', 'localhost');
if (!defined('WP_CONTENT_DIR') && !defined('DONT_SET_WP_CONTENT_DIR'))
    define('WP_CONTENT_DIR', '/var/lib/wordpress/wp-content');

/* Default value for the table_prefix variable so that it doesn't need to
   be put in every host-specific config file */
if (!isset($table_prefix)) {
    $table_prefix = 'wp_';
}

if (isset($_SERVER['HTTP_X_FORWARDED_PROTO']) && $_SERVER['HTTP_X_FORWARDED_PROTO'] == 'https')
    $_SERVER['HTTPS'] = 'on';

require_once(ABSPATH . 'wp-settings.php');
?>

# port for HTTP (descriptions, SOAP, media transfer) traffic
port=49200

# network interface to bind to (this is the only interface that will serve files)
network_interface=eth0

# set this to the directory you want scanned.
# * if have multiple directories, you can have multiple media_dir= lines
# * if you want to restrict a media_dir to a specific content type, you
#   can prepend the type, followed by a comma, to the directory:
#   + "A" for audio  (eg. media_dir=A,/home/jmaggard/Music)
#   + "V" for video  (eg. media_dir=V,/home/jmaggard/Videos)
#   + "P" for images (eg. media_dir=P,/home/jmaggard/Pictures)
media_dir=A,/repertoire/musique
media_dir=P,/repertoire/photos
media_dir=V,/repertoire/films

# set this if you want to customize the name that shows up on your clients
friendly_name=My DLNA Server

# set this if you would like to specify the directory where you want MiniDLNA to store its database and album art cache
db_dir=/var/cache/minidlna

# this should be a list of file names to check for when searching for album art
# note: names should be delimited with a forward slash ("/")
album_art_names=Cover.jpg/cover.jpg/AlbumArtSmall.jpg/albumartsmall.jpg/AlbumArt.jpg/albumart.jpg/Album.jpg/album.jpg/Folder.jpg/folder.jpg/Thumb.jpg/thumb.jpg

# set this to no to disable inotify monitoring to automatically discover new files
# note: the default is yes
inotify=yes

# set this to yes to enable support for streaming .jpg and .mp3 files to a TiVo supporting HMO
enable_tivo=no

# set this to strictly adhere to DLNA standards.
# * This will allow server-side downscaling of very large JPEG images,
#   which may hurt JPEG serving performance on (at least) Sony DLNA products.
strict_dlna=no

# default presentation url is http address on port 80
#presentation_url=http://www.mylan/index.php

# notify interval in seconds. default is 895 seconds.
notify_interval=900

# serial and model number the daemon will report to clients
# in its XML description
serial=12345678
model_number=1

# This is the configuration file for the MiniDLNA daemon, a DLNA/UPnP-AV media
# server.
#
# Unless otherwise noted, the commented out options show their default value.
#
# On Debian, you can also refer to the minidlna.conf(5) man page for
# documentation about this file.


# Path to the directory you want scanned for media files.
#
# This option can be specified more than once if you want multiple directories
# scanned.
#
# If you want to restrict a media_dir to a specific content type, you can
# prepend the directory name with a letter representing the type (A, P or V),
# followed by a comma, as so:
#   * "A" for audio    (eg. media_dir=A,/var/lib/minidlna/music)
#   * "P" for pictures (eg. media_dir=P,/var/lib/minidlna/pictures)
#   * "V" for video    (eg. media_dir=V,/var/lib/minidlna/videos)
#
# WARNING: After changing this option, you need to rebuild the database. Either
#          run minidlna with the '-R' option, or delete the 'files.db' file
#          from the db_dir directory (see below).
#          On Debian, you can run, as root, 'service minidlna force-reload' instead.
media_dir=/var/lib/minidlna

# Path to the directory that should hold the database and album art cache.
#db_dir=/var/lib/minidlna

# Path to the directory that should hold the log file.
#log_dir=/var/log

# Minimum level of importance of messages to be logged.
# Must be one of "off", "fatal", "error", "warn", "info" or "debug".
# "off" turns of logging entirely, "fatal" is the highest level of importance
# and "debug" the lowest.
#log_level=warn

# Use a different container as the root of the directory tree presented to
# clients. The possible values are:
#   * "." - standard container
#   * "B" - "Browse Directory"
#   * "M" - "Music"
#   * "P" - "Pictures"
#   * "V" - "Video"
# if you specify "B" and client device is audio-only then "Music/Folders" will be used as root
#root_container=.

# Network interface(s) to bind to (e.g. eth0), comma delimited.
#network_interface=

# IPv4 address to listen on (e.g. 192.0.2.1).
#listening_ip=

# Port number for HTTP traffic (descriptions, SOAP, media transfer).
port=8200

# URL presented to clients.
# The default is the IP address of the server on port 80.
#presentation_url=http://example.com:80

# Name that the DLNA server presents to clients.
#friendly_name=

# Serial number the server reports to clients.
serial=12345678

# Model name the server reports to clients.
#model_name=Windows Media Connect compatible (MiniDLNA)

# Model number the server reports to clients.
model_number=1

# Automatic discovery of new files in the media_dir directory.
#inotify=yes

# List of file names to look for when searching for album art. Names should be
# delimited with a forward slash ("/").
album_art_names=Cover.jpg/cover.jpg/AlbumArtSmall.jpg/albumartsmall.jpg/AlbumArt.jpg/albumart.jpg/Album.jpg/album.jpg/Folder.jpg/folder.jpg/Thumb.jpg/thumb.jpg

# Strictly adhere to DLNA standards.
# This allows server-side downscaling of very large JPEG images, which may
# decrease JPEG serving performance on (at least) Sony DLNA products.
#strict_dlna=no

# Support for streaming .jpg and .mp3 files to a TiVo supporting HMO.
#enable_tivo=no

# Notify interval, in seconds.
#notify_interval=895

# Path to the MiniSSDPd socket, for MiniSSDPd support.
#minissdpdsocket=/run/minissdpd.sock