Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

nombre réponses : 25

#0 -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 07/08/2012, à 15:24

Marrrrrrrie
Réponses : 41

Bonjour,

Je viens d'installer ubuntu 12.04 sur un Dell latitude E6330.
Il y a un seul problème majeur : le scroll sur le côté droit du touchpad ne fonctionne pas.
Le scroll-down marche avec une souris externe. Dans les paramètres systèmes il semble que mon touchpad soit reconnu comme une souris.
J'ai aussi essayé gsynaptics mais cocher ou décocher la case "utiliser la molette" ne change rien...
Avez-vous une idée pour m'aider ?

Merci beaucoup !
Marie

#1 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 08/08/2012, à 14:46

Marrrrrrrie
Réponses : 41

Salut !

Merci pour ta réponse. J'ai installé Synaptiks, mais quand je le lance je reçois le message d'erreur suivant:
"No touchpad found
No touchpad was found in this system. If the system has a touchpad, please make sure that the synaptics driver is properly installed and configured.
If your touchpad is not found though the driver is installed and configured correctly, please compile detailed information about your touchpad hardware and report this issue."
Et dans paramètres systèmes il y a une souris.
Mon touchpad à l'air reconnu comme une souris et pas comme un touchpad !
Comment faire pour changer ça ?

Marie

#2 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 11/08/2012, à 08:42

Marrrrrrrie
Réponses : 41

Voilà ce que donne xinput list :

⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ PS/2 Generic Mouse                      	id=12	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ Integrated Webcam                       	id=10	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=11	[slave  keyboard (3)]
    ↳ Dell WMI hotkeys 

Puis un xinput --list-props 12 donne :

Device 'PS/2 Generic Mouse':
        Device Enabled (132):   1
        Coordinate Transformation Matrix (134): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        Device Accel Profile (256):     0
        Device Accel Constant Deceleration (257):       1.000000
        Device Accel Adaptive Deceleration (258):       1.000000
        Device Accel Velocity Scaling (259):    10.000000
        Device Product ID (252):        2, 1
        Device Node (253):      "/dev/input/event7"
        Evdev Axis Inversion (260):     0, 0
        Evdev Axes Swap (262):  0
        Axis Labels (263):      "Rel X" (142), "Rel Y" (143)
        Button Labels (264):    "Button Left" (135), "Button Middle" (136), "Button Right" (137), "Button Wheel Up" (138), "Button Wheel Down" (139)
        Evdev Middle Button Emulation (265):    0
        Evdev Middle Button Timeout (266):      50
        Evdev Third Button Emulation (267):     0
        Evdev Third Button Emulation Timeout (268):     1000
        Evdev Third Button Emulation Button (269):      3
        Evdev Third Button Emulation Threshold (270):   20
        Evdev Wheel Emulation (271):    0
        Evdev Wheel Emulation Axes (272):       0, 0, 4, 5
        Evdev Wheel Emulation Inertia (273):    10
        Evdev Wheel Emulation Timeout (274):    200
        Evdev Wheel Emulation Button (275):     4
        Evdev Drag Lock Buttons (276):  0

où apparement il y a des possibilités d'émulation de molette etc... comment les activer ?
                       

Et un cat /proc/bus/input/devices :

I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input7
U: Uniq=
H: Handlers=mouse0 event7
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3

Du coup, synaptiks ne voit pas de touchpad. De plus je n'ai pas de fichier xorg.conf (merci ubuntu nouveau), donc je ne peux pas appliquer les solutions que j'ai pu trouver sur le net.

Une solution qui pourrait marcher serait de faire comme décrit ici : https://wiki.archlinux.org/index.php/Touchpad_Synaptics   , qui consisterait en fait à installer le paquet "synaptics" qui dans les anciennes versions de ubuntu, non ? Mais je ne sais pas comment installer ce synaptics : est-ce que c'est l'équivalent du synaptiks dont on m'a parlé ?

#3 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 07/10/2012, à 14:31

Marrrrrrrie
Réponses : 41

Bump !
Problème relou et pas résolu... Si vous avez une idée, je suis preneuse !
Merci !
Marie

#4 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 16/10/2012, à 11:49

Marrrrrrrie
Réponses : 41

Salut stevens4c, et merci de ta réponse !

Voici le résultat des deux commandes:

marie@pc:~>  xinput list
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ PS/2 Generic Mouse                      	id=13	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ Integrated Webcam                       	id=11	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=12	[slave  keyboard (3)]
    ↳ Dell WMI hotkeys                        	id=14	[slave  keyboard (3)]

Il semble que mon touchpad soit uniquement reconnu comme une souris !
PS/2 Generic Mouse c'est le touchpad, il n'y avait pas de souris branchée au moment de la commande.

marie@pc:~>  synclient 
Couldn't find synaptics properties. No synaptics driver loaded?

Est-ce que ca veut dire que j'ai tout simplement pas installé un truc ? smile

Merci de ton aide, et désolée d'avoir tardé pour la réponse !
Marie

#5 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 17/10/2012, à 19:02

Marrrrrrrie
Réponses : 41

Salut Stevens4c,

Voici le résultat des deux commandes:

marie@pc:~>  lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 413c:8197 Dell Computer Corp. 
Bus 001 Device 004: ID 1bcf:2895 Sunplus Innovation Technology Inc. 
Bus 002 Device 003: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
marie@pc:~>  xinput list-props 13
Device 'AT Translated Set 2 keyboard':
	Device Enabled (132):	1
	Coordinate Transformation Matrix (134):	1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
	Device Product ID (252):	1, 1
	Device Node (253):	"/dev/input/event4"

Est-ce que ça indique que le touchpad est branché sur un port usb ?
Merci beaucoup !
Marie

#6 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 18/10/2012, à 15:00

Marrrrrrrie
Réponses : 41

Salut,
Apparemment gsynaptics a été remplacé par gpointing-device-settings pour ma version.
Je l'ai installé, et quand je le lance, mon touchpad est reconnu comme une souris:
a9ZYc.png
J'ai essayé de cocher les différentes cases, mais ça n'active jamais le scroll !
Merci,
Marie

#7 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 18/10/2012, à 21:39

Marrrrrrrie
Réponses : 41

Non, synclient n'a pas l'air installé !

marie@pc:~>  synclient 
Couldn't find synaptics properties. No synaptics driver loaded?

#8 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 19/10/2012, à 15:38

Marrrrrrrie
Réponses : 41

Oui c'est bien ça!
Mais ce paquet est déjà installé hmm

#9 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 21/10/2012, à 14:30

Marrrrrrrie
Réponses : 41

Lorsque j'essaie d'installer xserver-xorg-input-synaptics:i386 dans la logithèque, le paquet existe bien, mais ubuntu refuse de l'installer, car il y a des paquets supplémentaires requis qui sont non-installables, notamment 'xorg-input-abi-16', et là ça dépasse un peu mes compétences smile
J'ai aussi désinstallé puis réinstallé le paquet xserver-xorg-input-synaptics, mais la commande synclient donne toujours la même chose...
Par contre quand je fais man synaptics, ça marche, je vois le man !

#10 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 21/10/2012, à 20:43

Marrrrrrrie
Réponses : 41

Voici le man synaptics

SYNAPTICS(4)                                                      SYNAPTICS(4)



NAME
       synaptics - touchpad input driver

SYNOPSIS
       Section "InputDevice"
         Identifier "devname"
         Driver "synaptics"
         Option "Device"   "devpath"
         Option "Path"     "path"
         ...
       EndSection

DESCRIPTION
       synaptics is an Xorg input driver for touchpads.  Even though touchpads
       can be handled by the normal evdev or mouse drivers, this driver allows
       more  advanced features of the touchpad to become available. Some bene‐
       fits would be:

       ·   Movement with adjustable, non-linear acceleration and speed.

       ·   Button events through short touching of the touchpad.

       ·   Double-Button events through double short touching of the touchpad.

       ·   Dragging through short touching and holding down the finger on  the
           touchpad (tap-and-drag gesture).

       ·   Middle and right button events on the upper and lower corner of the
           touchpad.

       ·   Vertical scrolling (button four and five events) through moving the
           finger on the right side of the touchpad.

       ·   The up/down button sends button four/five events.

       ·   Horizontal  scrolling  (button six and seven events) through moving
           the finger on the lower side of the touchpad.

       ·   The  multi-buttons  send  button  four/five  events  for   vertical
           scrolling and button six/seven events for horizontal scrolling.

       ·   Adjustable finger detection.

       ·   Multifinger  taps: two finger for right button and three finger for
           middle button events.  (Needs hardware  support.   Not  all  models
           implement this feature.)

       ·   Pressure-dependent motion speed.

       Note  that  depending  on the touchpad firmware, some of these features
       might be available even without using the synaptics driver.  Note  also
       that  some  functions are not available on all touchpad models, because
       they need support from  the  touchpad  hardware/firmware.  (Multifinger
       taps for example.)

       The  name  "synaptics"  is historical and the driver still provides the
       synaptics protocol parsing code. Under  Linux  however,  the  hardware-
       specifics  are  handled by the kernel and this driver will work for any
       touchpad that has a working kernel driver. If your device is recognized
       as  "PS/2  Mouse"  or  similar, the kernel driver does not support your
       device and this driver will only provide limited functionality.


CONFIGURATION OPTIONS
       Please refer to xorg.conf(5) for general configuration details and  for
       options  that  can  be  used with all input drivers.  This section only
       covers configuration details specific to this driver.

       The following driver Options are supported:

       Option "Device" "string"
              This option specifies the device file in your  "/dev"  directory
              which  will  be used to access the physical device. Normally you
              should use something like "/dev/input/eventX", where X  is  some
              integer.

       Option "Protocol" "string"
              Specifies  which kernel driver will be used by this driver. This
              is the list of supported drivers and their default  use  scenar‐
              ios.

              auto-dev   automatic, default (recommend)
              event      Linux 2.6 kernel events
              psaux      raw device access (Linux 2.4)
              psm        FreeBSD psm driver

       Option "SHMConfig" "boolean"
              Switch  on/off shared memory for run-time debugging. This option
              does not have an effect on run-time configuration anymore and is
              only useful for hardware event debugging.

       Option "LeftEdge" "integer"
              X coordinate for left edge. Property: "Synaptics Edges"

       Option "RightEdge" "integer"
              X coordinate for right edge. Property: "Synaptics Edges"

       Option "TopEdge" "integer"
              Y coordinate for top edge. Property: "Synaptics Edges"

       Option "BottomEdge" "integer"
              Y coordinate for bottom edge. Property: "Synaptics Edges"

       Option "FingerLow" "integer"
              When  finger  pressure drops below this value, the driver counts
              it as a release. Property: "Synaptics Finger"

       Option "FingerHigh" "integer"
              When finger pressure goes above this value, the driver counts it
              as a touch. Property: "Synaptics Finger"

       Option "FingerPress" "integer"
              When finger pressure goes above this value, the driver counts it
              as a press.  Currently a press  is  equivalent  to  putting  the
              touchpad in trackstick emulation mode. Property: "Synaptics Fin‐
              ger"

       Option "MaxTapTime" "integer"
              Maximum time (in milliseconds) for detecting  a  tap.  Property:
              "Synaptics Tap Durations"

       Option "MaxTapMove" "integer"
              Maximum  movement  of  the finger for detecting a tap. Property:
              "Synaptics Tap Move"

       Option "MaxDoubleTapTime" "integer"
              Maximum time (in milliseconds) for detecting a double tap. Prop‐
              erty: "Synaptics Tap Durations"

       Option "ClickTime" "integer"
              The  duration of the mouse click generated by tapping. Property:
              "Synaptics Tap Durations"

       Option "ClickPad" "boolean"
              Whether the device is a click pad. See ClickPad support for more
              details. Property: "Synaptics ClickPad"

       Option "FastTaps" "boolean"
              Makes  the  driver  react faster to a single tap, but also makes
              double clicks caused by double tapping slower. Property: "Synap‐
              tics Tap FastTap"

       Option "VertEdgeScroll" "boolean"
              Enable  vertical  scrolling  when dragging along the right edge.
              Property: "Synaptics Edge Scrolling"

       Option "HorizEdgeScroll" "boolean"
              Enable horizontal scrolling when dragging along the bottom edge.
              Property: "Synaptics Edge Scrolling"

       Option "CornerCoasting" "boolean"
              Enable  edge  scrolling to continue while the finger stays in an
              edge corner.  Property: "Synaptics Edge Scrolling"

       Option "VertTwoFingerScroll" "boolean"
              Enable vertical scrolling when dragging with  two  fingers  any‐
              where   on   the   touchpad.   Property:  "Synaptics  Two-Finger
              Scrolling"

       Option "HorizTwoFingerScroll" "boolean"
              Enable horizontal scrolling when dragging with two fingers  any‐
              where   on   the   touchpad.   Property:  "Synaptics  Two-Finger
              Scrolling"

       Option "VertScrollDelta" "integer"
              Move distance of  the  finger  for  a  scroll  event.  Property:
              "Synaptics Scrolling Distance"

       Option "HorizScrollDelta" "integer"
              Move  distance  of  the  finger  for  a  scroll event. Property:
              "Synaptics Scrolling Distance"

       Option "EdgeMotionMinZ" "integer"
              Finger pressure at which minimum edge motion speed is set. Prop‐
              erty: "Synaptics Edge Motion Pressure"

       Option "EdgeMotionMaxZ" "integer"
              Finger pressure at which maximum edge motion speed is set. Prop‐
              erty: "Synaptics Edge Motion Pressure"

       Option "EdgeMotionMinSpeed" "integer"
              Slowest setting for edge motion speed. Property: "Synaptics Edge
              Motion Speed"

       Option "EdgeMotionMaxSpeed" "integer"
              Fastest setting for edge motion speed. Property: "Synaptics Edge
              Motion Speed"

       Option "EdgeMotionUseAlways" "boolean"
              If on, edge motion is also used for normal movements.   If  off,
              edge  motion  is  used  only when dragging. Property: "Synaptics
              Edge Motion Always"

       Option "MinSpeed" "float"
              Minimum speed factor. Property: "Synaptics Move Speed"

       Option "MaxSpeed" "float"
              Maximum speed factor. Property: "Synaptics Move Speed"

       Option "AccelFactor" "float"
              Acceleration factor  for  normal  pointer  movements.  Property:
              "Synaptics Move Speed"

       Option "TrackstickSpeed" "float"
              Speed scale when in trackstick emulation mode. Property: "Synap‐
              tics Move Speed"

       Option "PressureMotionMinZ" "integer"
              Finger pressure at  which  minimum  pressure  motion  factor  is
              applied. Property: "Synaptics Pressure Motion"

       Option "PressureMotionMaxZ" "integer"
              Finger  pressure  at  which  maximum  pressure  motion factor is
              applied.  Property: "Synaptics Pressure Motion"

       Option "PressureMotionMinFactor" "integer"
              Lowest setting for pressure motion factor. Property:  "Synaptics
              Pressure Motion Factor"

       Option "PressureMotionMaxFactor" "integer"
              Greatest  setting  for pressure motion factor. Property: "Synap‐
              tics Pressure Motion Factor"

       Option "HorizHysteresis" "integer"
              The minimum horizontal HW distance required to  generate  motion
              events.  Can  be  specified  as  a percentage. Increase if noise
              motion is a problem for you. Zero  is  disabled.   Default:  0.5
              percent  of  the  diagonal or (in case of evdev) the appropriate
              "fuzz" as advertised by the device.

       Option "VertHysteresis" "integer"
              The minimum vertical HW distance  required  to  generate  motion
              events. See HorizHysteresis.

       Option "UpDownScrolling" "boolean"
              If  on, the up/down buttons generate button 4/5 events.  If off,
              the up button generates a double click and the down button  gen‐
              erates  a  button  2  event.  This  option is only available for
              touchpads with physical scroll  buttons.   Property:  "Synaptics
              Button Scrolling"

       Option "LeftRightScrolling" "boolean"
              If  on,  the  left/right buttons generate button 6/7 events.  If
              off, the left/right buttons both generate button 2 events.  This
              option is only available for touchpads with physical scroll but‐
              tons.  Property: "Synaptics Button Scrolling"

       Option "UpDownScrollRepeat" "boolean"
              If on, and the up/down buttons are used for  scrolling  (UpDown‐
              Scrolling),  these  buttons will send auto-repeating 4/5 events,
              with the delay between repeats determined by ScrollButtonRepeat.
              This option is only available for touchpads with physical scroll
              buttons.  Property: "Synaptics Button Scrolling Repeat"

       Option "LeftRightScrollRepeat" "boolean"
              If on, and the left/right buttons are used for scrolling  (Left‐
              RightScrolling),  these  buttons  will  send  auto-repeating 6/7
              events, with the delay between repeats determined by  ScrollBut‐
              tonRepeat.   This  option  is  only available for touchpads with
              physical scroll buttons.  Property: "Synaptics Button  Scrolling
              Repeat"

       Option "ScrollButtonRepeat" "integer"
              The  number of milliseconds between repeats of button events 4-7
              from the up/down/left/right scroll buttons.  This option is only
              available for touchpads with physical scroll buttons.  Property:
              "Synaptics Button Scrolling Time"

       Option "EmulateMidButtonTime" "integer"
              Maximum time (in  milliseconds)  for  middle  button  emulation.
              Property: "Synaptics Middle Button Timeout"

       Option "EmulateTwoFingerMinZ" "integer"
              For  touchpads not capable of detecting multiple fingers but are
              capable of detecting finger pressure and width, this sets the  Z
              pressure threshold.  When both Z pressure and W width thresholds
              are crossed, a two finger press will be emulated. This  defaults
              to  a  value that disables emulation on touchpads with real two-
              finger detection and defaults to a value that enables  emulation
              on  remaining touchpads that support pressure and width support.
              Property: "Synaptics Two-Finger Pressure"

       Option "EmulateTwoFingerMinW" "integer"
              For touchpads not capable of detecting multiple fingers but  are
              capable  of detecting finger width and pressure, this sets the W
              width threshold.  When both W width and  Z  pressure  thresholds
              are  crossed,  a two finger press will be emulated. This feature
              works best with (PalmDetect) off. Property: "Synaptics  Two-Fin‐
              ger Width"

       Option "TouchpadOff" "integer"
              Switch off the touchpad.  Valid values are:

              0   Touchpad is enabled
              1   Touchpad is switched off
              2   Only tapping and scrolling is switched off
              Property: "Synaptics Off"

       Option "LockedDrags" "boolean"
              If off, a tap-and-drag gesture ends when you release the finger.
              If on, the gesture is active until you tap  a  second  time,  or
              until  LockedDragTimeout  expires.  Property:  "Synaptics Locked
              Drags"

       Option "LockedDragTimeout" "integer"
              This parameter specifies how long it takes (in milliseconds) for
              the  LockedDrags  mode  to be automatically turned off after the
              finger is  released  from  the  touchpad.  Property:  "Synaptics
              Locked Drags Timeout"

       Option "RTCornerButton" "integer"
              Which  mouse  button is reported on a right top corner tap.  Set
              to 0 to disable. Property: "Synaptics Tap Action"

       Option "RBCornerButton" "integer"
              Which mouse button is reported on a  right  bottom  corner  tap.
              Set to 0 to disable. Property: "Synaptics Tap Action"

       Option "LTCornerButton" "integer"
              Which mouse button is reported on a left top corner tap.  Set to
              0 to disable. Property: "Synaptics Tap Action"

       Option "LBCornerButton" "integer"
              Which mouse button is reported on a left bottom corner tap.  Set
              to 0 to disable. Property: "Synaptics Tap Action"

       Option "TapButton1" "integer"
              Which  mouse  button is reported on a non-corner one-finger tap.
              Set to 0 to disable. Property: "Synaptics Tap Action"

       Option "TapButton2" "integer"
              Which mouse button is reported on a non-corner  two-finger  tap.
              Set to 0 to disable. Property: "Synaptics Tap Action"

       Option "TapButton3" "integer"
              Which mouse button is reported on a non-corner three-finger tap.
              Set to 0 to disable. Property: "Synaptics Tap Action"

       Option "ClickFinger1" "integer"
              Which mouse button is reported when left-clicking with one  fin‐
              ger.  Set to 0 to disable. Property: "Synaptics Click Action"

       Option "ClickFinger2" "integer"
              Which  mouse button is reported when left-clicking with two fin‐
              gers.  Set to 0 to disable. Property: "Synaptics Click Action"

       Option "ClickFinger3" "integer"
              Which mouse button is reported  when  left-clicking  with  three
              fingers.   Set  to  0  to  disable.  Property:  "Synaptics Click
              Action"

       Option "CircularScrolling" "boolean"
              If on, circular scrolling is used. Property: "Synaptics Circular
              Scrolling"

       Option "CircScrollDelta" "float"
              Move angle (radians) of finger to generate a scroll event. Prop‐
              erty: "Synaptics Circular Scrolling Distance"

       Option "CircScrollTrigger" "integer"
              Trigger region on the touchpad to start circular scrolling

              0   All Edges
              1   Top Edge
              2   Top Right Corner
              3   Right Edge
              4   Bottom Right Corner
              5   Bottom Edge
              6   Bottom Left Corner
              7   Left Edge
              8   Top Left Corner
              Property: "Synaptics Circular Scrolling Trigger"

       Option "CircularPad" "boolean"
              Instead of being a rectangle, the edge is the  ellipse  enclosed
              by   the  Left/Right/Top/BottomEdge  parameters.   For  circular
              touchpads. Property: "Synaptics Circular Pad"

       Option "PalmDetect" "boolean"
              If palm detection  should  be  enabled.   Note  that  this  also
              requires  hardware/firmware support from the touchpad. Property:
              "Synaptics Palm Detection"

       Option "PalmMinWidth" "integer"
              Minimum finger width at which touch is considered a palm.  Prop‐
              erty: "Synaptics Palm Dimensions"

       Option "PalmMinZ" "integer"
              Minimum  finger  pressure  at  which touch is considered a palm.
              Property: "Synaptics Palm Dimensions"

       Option "CoastingSpeed" "float"
              Your finger needs to produce this many  scrolls  per  second  in
              order to start coasting.  The default is 20 which should prevent
              you from starting coasting unintentionally.  0  disables  coast‐
              ing. Property: "Synaptics Coasting Speed"

       Option "CoastingFriction" "float"
              Number  of  scrolls/second²  to  decrease  the  coasting  speed.
              Default is 50.  Property: "Synaptics Coasting Speed"

       Option "SingleTapTimeout" "integer"
              Timeout after a tap to recognize it as a single  tap.  Property:
              "Synaptics Tap Durations"

       Option "GrabEventDevice" "boolean"
              If  GrabEventDevice  is  true,  the  driver  will grab the event
              device for exclusive use when using the linux 2.6  event  proto‐
              col.   When  using  other  protocols, this option has no effect.
              Grabbing the event device means that no other user space or ker‐
              nel  space  program sees the touchpad events.  This is desirable
              if the X  config  file  includes  /dev/input/mice  as  an  input
              device,  but  is  undesirable  if you want to monitor the device
              from user space.  When changing this  parameter  with  the  syn‐
              client program, the change will not take effect until the synap‐
              tics driver is disabled and reenabled.  This can be achieved  by
              switching to a text console and then switching back to X.

       Option "TapAndDragGesture" "boolean"
              Switch  on/off  the  tap-and-drag  gesture.   This gesture is an
              alternative way of dragging.  It is performed by tapping (touch‐
              ing  and  releasing  the finger), then touching again and moving
              the finger on the touchpad.  The gesture is enabled  by  default
              and  can  be disabled by setting the TapAndDragGesture option to
              false. Property: "Synaptics Gestures"

       Option
              ®esolutionDetect" "" boolean " Allow or  prevent  the  synaptics
              driver  from reporting the size of the touchpad to the X server.
              The X server normally uses this information to  scale  movements
              so  that  touchpad movement corresponds visually to mouse cursor
              movements on the screen.  However, in some rare cases where  the
              touchpad  height/width ratio is significantly different from the
              laptop, it can cause the mouse cursor to skip pixels in the X or
              Y  axis.   This  option  allows disabling this scaling behavior,
              which can provide smoother mouse movement in such cases.   Prop‐
              erty: "Synaptics Resolution Detect"

       Option "VertResolution" "integer"
              Resolution  of  X  coordinates in units/millimeter. The value is
              used together with HorizResolution to compensate unequal  verti‐
              cal  and  horizontal  sensitivity.  Setting  VertResolution  and
              HorizResolution equal  values  means  no  compensation.  Default
              value  is  read from the touchpad or set to 1 if value could not
              be read.  Property: "Synaptics Pad Resolution"

       Option "HorizResolution" "integer"
              Resolution of Y coordinates in units/millimeter.  The  value  is
              used together with VertResolution to compensate unequal vertical
              and horizontal sensitivity. Setting VertResolution and HorizRes‐
              olution  equal  values  means  no compensation. Default value is
              read from the touchpad or set to 1 if value could not  be  read.
              Property: "Synaptics Pad Resolution"

       Option "AreaLeftEdge" "integer"
              Ignore movements, scrolling and tapping which take place left of
              this edge.  The option is disabled by default and can be enabled
              by  setting  the  AreaLeftEdge option to any integer value other
              than zero. If supported by the server (version 1.9  and  later),
              the  edge  may be specified in percent of the total width of the
              touchpad. Property: "Synaptics Area"

       Option "AreaRightEdge" "integer"
              Ignore movements, scrolling and tapping which take  place  right
              of  this  edge.   The  option  is disabled by default and can be
              enabled by setting the AreaRightEdge option to any integer value
              other  than  zero.  If  supported by the server (version 1.9 and
              later), the edge may be specified in percent of the total  width
              of the touchpad. Property: "Synaptics Area"

       Option "AreaTopEdge" "integer"
              Ignore  movements,  scrolling and tapping which take place above
              this edge.  The option is disabled by default and can be enabled
              by  setting  the  AreaTopEdge  option to any integer value other
              than zero. If supported by the server (version 1.9  and  later),
              the  edge may be specified in percent of the total height of the
              touchpad. Property: "Synaptics Area"

       Option "AreaBottomEdge" "integer"
              Ignore movements, scrolling and tapping which take  place  below
              this edge.  The option is disabled by default and can be enabled
              by setting the AreaBottomEdge option to any integer value  other
              than  zero.  If supported by the server (version 1.9 and later),
              the edge may be specified in percent of the total height of  the
              touchpad. Property: "Synaptics Area"

       Option "SoftButtonAreas" "RBL RBR RBT RBB MBL MBR MBT MBB"
              This  option is only available on ClickPad devices.  Enable soft
              button click area support on ClickPad devices.  The  first  four
              parameters  are  the  left, right, top, bottom edge of the right
              button, respectively, the second four parameters are  the  left,
              right,  top, bottom edge of the middle button, respectively. Any
              of the values may be given as percentage of the  touchpad  width
              or height, whichever applies.  If any edge is set to 0, the but‐
              ton is assumed to extend to infinity  in  the  given  direction.
              Setting  all  values to 0 disables soft button areas.  Property:
              "Synaptics Soft Button Areas"


CONFIGURATION DETAILS
   Area handling
       The LeftEdge, RightEdge, TopEdge and BottomEdge parameters are used  to
       define the edge and corner areas of the touchpad.  The parameters split
       the touchpad area in 9 pieces, like this:
             │             │
             │ LeftEdge    │ RightEdge
       ┌─────└─────────────└───┐ Physical top edge
       │ 1   │      2      │ 3 │
       └─────└─────────────└───┘ TopEdge
       │     │             │   │
       │ 4   │      5      │ 6 │
       │     │             │   │
       └─────└─────────────└───┘ BottomEdge
       │ 7   │      8      │ 9 │
       └─────└─────────────└───┘ Physical bottom edge
       │Physical left edge     │ Physical right edge

       Coordinates to the left of LeftEdge are part of the left edge (areas 1,
       4  and  7), coordinates to the left of LeftEdge and above TopEdge (area
       1) are part of the upper left corner, etc.

       A good way to find appropriate edge parameters is to enable the SHMCon‐
       fig  option  and run "synclient -m 1" to see the x/y coordinates corre‐
       sponding to different positions on the touchpad.

       The perceived physical edges may be  adjusted  with  the  AreaLeftEdge,
       AreaRightEdge, AreaTopEdge, and AreaBottomEdge options. If these values
       are set to something other than the physical edges, input in the  space
       between the area edge and the respective physical edge is ignored. Note
       that this reduces the available space on the touchpad.

   Tapping
       A tap event happens when the finger is touched and released in  a  time
       interval shorter than MaxTapTime, and the touch and release coordinates
       are less than MaxTapMove units apart.  A "touch" event happens when the
       Z  value goes above FingerHigh, and an "untouch" event happens when the
       Z value goes below FingerLow.

       The MaxDoubleTapTime parameter has the same function as the  MaxTapTime
       parameter,  but  for  the second, third, etc tap in a tap sequence.  If
       you can't perform double clicks fast enough (for example, xmms  depends
       on  fast double clicks), try reducing this parameter.  If you can't get
       word selection to work in xterm (ie  button  down,  button  up,  button
       down, move mouse), try increasing this parameter.

       The  ClickTime parameter controls the delay between the button down and
       button up X events generated in response to a tap event.   A  too  long
       value  can  cause undesirable autorepeat in scroll bars and a too small
       value means that visual feedback  from  the  gui  application  you  are
       interacting  with  is  harder  to  see.  For this parameter to have any
       effect, "FastTaps" has to be disabled.

   Acceleration
       The MinSpeed, MaxSpeed and AccelFactor parameters control  the  pointer
       motion  speed.   The  speed  value defines the scaling between touchpad
       coordinates and  screen  coordinates.   When  moving  the  finger  very
       slowly,  the MinSpeed value is used, when moving very fast the MaxSpeed
       value is used.  When moving the finger at moderate  speed,  you  get  a
       pointer  motion  speed somewhere between MinSpeed and MaxSpeed.  If you
       don't want any acceleration, set MinSpeed  and  MaxSpeed  to  the  same
       value.

       The MinSpeed, MaxSpeed and AccelFactor parameters don't have any effect
       on scrolling speed.  Scrolling speed  is  determined  solely  from  the
       VertScrollDelta  and  HorizScrollDelta parameters.  To disable vertical
       or horizontal scrolling, set  VertScrollDelta  or  HorizScrollDelta  to
       zero.  To invert the direction of vertical or horizontal scrolling, set
       VertScrollDelta or HorizScrollDelta to a negative value.

       Acceleration is mostly handled outside the driver, thus the driver will
       translate  MinSpeed  into  constant  deceleration and adapt MaxSpeed at
       startup time. This ensures you can user  the  other  acceleration  pro‐
       files,  albeit  without pressure motion. However the numbers at runtime
       will likely be different from any options you may have set.


   Pressure motion
       When pressure motion is activated, the cursor motion speed  depends  on
       the  pressure exerted on the touchpad (the more pressure exerted on the
       touchpad, the faster the pointer).  More precisely the speed  is  first
       calculated according to MinSpeed, MaxSpeed and AccelFactor, and then is
       multiplied by a sensitivity factor.

       The sensitivity factor can be adjusted using the PressureMotion parame‐
       ters.   If the pressure is below PressureMotionMinZ, PressureMotionMin‐
       Factor is used, and if the pressure is greater than PressureMotionMaxZ,
       PressureMotionMaxFactor  is  used.   By default, PressureMotionMinZ and
       PressureMotionMaxZ are equal to EdgeMotionMinZ and EdgeMotionMaxZ.  For
       a pressure value between PressureMotionMinZ and PressureMotionMaxZ, the
       factor is increased linearly.

   Edge motion
       When hitting an edge, movement  can  be  automatically  continued.   If
       EdgeMotionUseAlways  is  false, edge motion is only used when dragging.
       With EdgeMotionUseAlways set to true, it is also used for normal cursor
       movements.

       Edge  motion  speed  is calculated by taking into account the amount of
       pressure applied to the touchpad.   The  sensitivity  can  be  adjusted
       using  the EdgeMotion parameters.  If the pressure is below EdgeMotion‐
       MinZ, EdgeMotionMinSpeed is used, and if the pressure is  greater  than
       EdgeMotionMaxZ,  EdgeMotionMaxSpeed  is  used.   For  a  pressure value
       between EdgeMotionMinZ and EdgeMotionMaxZ, the speed is increased  lin‐
       early.

   Middle button emulation
       Since  most  synaptics  touchpad models don't have a button that corre‐
       sponds to the middle button on a mouse, the driver can  emulate  middle
       mouse  button  events.  If you press both the left and right mouse but‐
       tons at almost the same time (no more  than  EmulateMidButtonTime  mil‐
       liseconds apart) the driver generates a middle mouse button event.

   Circular scrolling
       Circular  scrolling  acts  like  a  scrolling  wheel  on  the touchpad.
       Scrolling is engaged when a drag starts in the given  CircScrollTrigger
       region, which can be all edges, a particular side, or a particular cor‐
       ner.  Once scrolling is engaged, moving your finger in  clockwise  cir‐
       cles around the center of the touchpad will generate scroll down events
       and counter clockwise motion will generate scroll up  events.   Lifting
       your  finger will disengage circular scrolling.  Use tight circles near
       the center of the pad for fast scrolling and large circles  for  better
       control.  When used together with vertical scrolling, hitting the upper
       or lower right corner will seamlessly switch over from vertical to cir‐
       cular scrolling.


   Coasting
       Coasting  is  enabled  by setting the CoastingSpeed parameter to a non-
       zero value.  Coasting comes in two flavors: conventional  (finger  off)
       coasting, and corner (finger on) coasting.

       Conventional  coasting is enabled when coasting is enabled, and Corner‐
       Coasting is set to false.  When conventional coasting is enabled, hori‐
       zontal/vertical  scrolling  can  continue  after the finger is released
       from the lower/right edge of the touchpad.   The  driver  computes  the
       scrolling  speed  corresponding  to the finger speed immediately before
       the finger leaves the touchpad.  If this scrolling speed is larger than
       the CoastingSpeed parameter (measured in scroll events per second), the
       scrolling will continue with the same speed in the same direction until
       the finger touches the touchpad again.

       Corner coasting is enabled when coasting is enabled, and CornerCoasting
       is set to true.  When corner coasting is enabled,  edge  scrolling  can
       continue as long as the finger stays in a corner.  Coasting begins when
       the finger enters the corner, and continues until the finger leaves the
       corner.   CornerCoasting takes precedence over the seamless switch from
       edge scrolling to circular scrolling.  That is,  if  CornerCoasting  is
       active,  scrolling  will  stop,  and circular scrolling will not start,
       when the finger leaves the corner.


   Noise cancellation
       The synaptics has a built-in noise cancellation  based  on  hysteresis.
       This means that incoming coordinates actually shift a box of predefined
       dimensions such that it covers the incoming coordinate,  and  only  the
       boxes  own  center is used as input. Obviously, the smaller the box the
       better,  but  the  likelyhood  of  noise  motion  coming  through  also
       increases.


   Trackstick mode
       Trackstick  emulation  mode is entered when pressing the finger hard on
       the touchpad.  The FingerPress parameter controls the minimum  required
       finger pressure.  If the finger hasn't moved more than MaxTapMove after
       MaxTapTime has elapsed, trackstick mode is entered.  In this mode, mov‐
       ing  the  finger  slightly  in  any direction gives a speed vector that
       moves the pointer.  The TrackstickSpeed parameter  controls  the  ratio
       between pointer speed and finger movement distance.  Trackstick mode is
       exited when the finger pressure drops below FingerLow or when the  fin‐
       ger is moved further than MaxTapMove away from the initial position.


   ClickPad support
       A  click pad device has button(s) integrated into the touchpad surface.
       The user must press downward on the touchpad in order  to  generated  a
       button press. ClickPad support is enabled if the option ClickPad is set
       or the property is set at runtime. On some platforms, this option  will
       be set automatically if the kernel detects a matching device. On Linux,
       the device must have the INPUT_PROP_BUTTONPAD property set.

       ClickPads do not support middle mouse  button  emulation.  If  enabling
       ClickPad  support  at  runime,  the user must also set the middle mouse
       button timeout to 0. If auto-detected, middle mouse button emulation is
       disabled by the driver.

       ClickPads  provide  software  emulated  buttons through Option SoftBut‐
       tonAreas.  These buttons enable areas on the  touchpad  to  perform  as
       right  or  middle mouse button. When the user performs a click within a
       defined soft button area, a right or middle click is performed.


DEVICE PROPERTIES
       Synaptics 1.0 and higher support input device properties if the  driver
       is  running on X server 1.6 or higher. On these driver versions, Option
       "SHMConfig" is not needed to enable run-time  configuration.  The  syn‐
       client  tool shipped with synaptics version 1.1 uses input device prop‐
       erties by default.  Properties supported:

       Synaptics Edges
              32 bit, 4 values, left, right, top, bottom.


       Synaptics Finger
              32 bit, 3 values, low, high, press.


       Synaptics Tap Time
              32 bit.


       Synaptics Tap Move
              32 bit.


       Synaptics Tap Durations
              32 bit, 3 values, single touch timeout,  max  tapping  time  for
              double taps, duration of a single click.


       Synaptics ClickPad
              8 bit (Bool).


       Synaptics Tap FastTap
              8 bit (BOOL).


       Synaptics Middle Button Timeout
              32 bit.


       Synaptics Two-Finger Pressure
              32 bit.


       Synaptics Two-Finger Width
              32 bit.


       Synaptics Scrolling Distance
              32 bit, 2 values, vert, horiz.


       Synaptics Edge Scrolling
              8 bit (BOOL), 3 values, vertical, horizontal, corner.


       Synaptics Two-Finger Scrolling
              8 bit (BOOL), 2 values, vertical, horizontal.


       Synaptics Move Speed
              FLOAT, 4 values, min, max, accel, trackstick.


       Synaptics Edge Motion Pressure
              32 bit, 2 values, min, max.


       Synaptics Edge Motion Speed
              32 bit, 2 values, min, max.


       Synaptics Edge Motion Always
              8 bit (BOOL).


       Synaptics Button Scrolling
              8 bit (BOOL), 2 values, updown, leftright.


       Synaptics Button Scrolling Repeat
              8 bit (BOOL), 2 values, updown, leftright.


       Synaptics Button Scrolling Time
              32 bit.


       Synaptics Off
              8 bit, valid values (0, 1, 2).


       Synaptics Locked Drags
              8 bit (BOOL).


       Synaptics Locked Drags Timeout
              32 bit.


       Synaptics Tap Action
              8  bit,  up  to  MAX_TAP values (see synaptics.h), 0 disables an
              element. order: RT, RB, LT, LB, F1, F2, F3.


       Synaptics Click Action
              8 bit, up to MAX_CLICK values (see synaptics.h), 0  disables  an
              element.  order: Finger 1, 2, 3.


       Synaptics Circular Scrolling
              8 bit (BOOL).


       Synaptics Circular Scrolling Distance
              FLOAT.


       Synaptics Circular Scrolling Trigger
              8 bit, valid values 0..8 (inclusive) order: any edge, top, top +
              right, right, right + bottom, bottom, bottom + left, left,  left
              + top.


       Synaptics Circular Pad
              8 bit (BOOL).


       Synaptics Palm Detection
              8 bit (BOOL).


       Synaptics Palm Dimensions
              32 bit, 2 values, width, z.


       Synaptics Coasting Speed
              FLOAT, 2 values, speed, friction.


       Synaptics Pressure Motion
              32 bit, 2 values, min, max.


       Synaptics Pressure Motion Factor
              FLOAT, 2 values, min, max.


       Synaptics Resolution Detect
              8 bit (BOOL).


       Synaptics Grab Event Device
              8 bit (BOOL).


       Synaptics Gestures
              8 bit (BOOL), 1 value, tap-and-drag.


       Synaptics Area
              The  AreaLeftEdge, AreaRightEdge, AreaTopEdge and AreaBottomEdge
              parameters are used to define the edges of the  active  area  of
              the  touchpad.  All  movements, scrolling and tapping which take
              place outside of this area will be  ignored.  This  property  is
              disabled by default.

              32  bit,  4 values, left, right, top, bottom. 0 disables an ele‐
              ment.


       Synaptics Soft Button Areas
              This property is only available on ClickPad devices.  The  Right
              and  middle soft button areas are used to support right and mid‐
              dle click actions on a ClickPad device. Providing 0 for all val‐
              ues of a given button disables the button area.

              32 bit, 8 values, RBL, RBR, RBT, RBB, MBL, MBR, MBT, MBB.


       Synaptics Capabilities
              This read-only property expresses the physical capability of the
              touchpad, most notably whether the  touchpad  hardware  supports
              multi-finger tapping and scrolling.

              8  bit (BOOL), 7 values (read-only), has left button, has middle
              button, has right  button,  two-finger  detection,  three-finger
              detection, pressure detection, and finger/palm width detection.


       Synaptics Pad Resolution
              32  bit  unsigned, 2 values (read-only), vertical, horizontal in
              units/millimeter.


NOTES
       Configuration through InputClass sections is recommended in  X  servers
       1.8  and  later.  See  xorg.conf.d(5)  for  more  details.  An  example
       xorg.conf.d snippet is provided in ${sourcecode}/conf/50-synaptics.conf

       Configuration through hal fdi files is recommended in  X  servers  1.5,
       1.6  and  1.7.  An  example  hal  policy  file is provided in ${source‐
       code}/conf/11-x11-synaptics.fdi

       If either of Protocol "auto-dev" (default) or Protocol "event" is used,
       the  driver  initializes defaults based on the capabilities reported by
       the kernel driver. Acceleration, edges and resolution are based on  the
       dimensions  reported  by the kernel. If the kernel reports multi-finger
       detection, two-finger vertical scrolling is  enabled,  horizontal  two-
       finger  scrolling  is  disabled  and  edge scrolling is disabled. If no
       multi-finger capabilities are reported, edge scrolling is  enabled  for
       both horizontal and vertical scrolling.  Tapping is disabled by default
       for touchpads with one or more physical buttons.  To enable it you need
       to  map  tap actions to buttons. See the "TapButton1", "TapButton2" and
       "TapButton3" options.

       Button mapping for physical buttons is handled in the server.   If  the
       device  is  switched  to  left-handed (an in-server mapping of physical
       buttons 1, 2, 3 to the logical buttons 3,  2,  1,  respectively),  both
       physical  and  TapButtons are affected. To counteract this, the TapBut‐
       tons need to be set up in reverse order (TapButton1=3, TapButton2=1).


REMOVED OPTIONS
       The following options are no longer part of the driver configuration:

       Option "Repeater" "string"

       Option "HistorySize" "integer"

       Option "SpecialScrollAreaRight" "boolean"

       Option "GuestMouseOff" "boolean"


AUTHORS
       Peter Osterlund <petero2@telia.com> and many others.

SEE ALSO
       Xorg(1), xorg.conf(5), Xserver(1), X(7), synclient(1), syndaemon(1)



X Version 11              xf86-input-synaptics 1.6.2              SYNAPTICS(4)

Et egrep -i 'synap|alps|etps' /proc/bus/input/devices  ne renvoie rien...

#11 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 22/10/2012, à 00:18

Marrrrrrrie
Réponses : 41

Ca n'a pas marché :'(
Quand j'ai installé cet ordi avec la version 12.04, il y a environ 6 mois, j'ai déjà fait une réinstallation complète dès que je me suis rendue compte du problème. Donc je doute que réinstaller cette version changera quelque chose...
J'avais aussi essayé une version antérieure, je ne sais plus exactement laquelle, et il y avait le même problème !
Est-ce que la nouvelle version 12.10 peut changer quelque chose à ton avis ?

#12 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 22/10/2012, à 23:28

Marrrrrrrie
Réponses : 41

Ca n'a pas marché non plus !
Sinon j'ai retrouvé: quand j'ai installé cet ordi j'avais aussi essayé un live cd de xubuntu 10.09 et 12.04, et le scroll ne marchait pas mieux !
J'essayerai de réinstaller mon ordi dans quelques temps, mais je n'ai pas trop le temps pour l'instant.
Je te tiendrai au courant par ce post de si ça a marché !
Si toi ou d'autres avez d'autres idées de choses à essayer entre temps, je suis preneuse...
Merci beaucoup en tout cas !
Marie

#13 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 18/11/2012, à 12:00

Marrrrrrrie
Réponses : 41

Merci, mais ça n'a pas marché non plus.
J'ai essayé la version 10.12 sur live cd, le scroll ne marchait pas et le touchpad avait aussi l'air d'être reconnu comme une souris... Du coup je ne l'ai pas installée !
A plus,
Marie

#14 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 21/11/2012, à 23:33

Marrrrrrrie
Réponses : 41

Non, ça renvoie rien...

#15 Re : -1 »  Pas de scroll avec le touchpad (ubuntu 12.04) » Le 06/12/2012, à 22:17

Marrrrrrrie
Réponses : 41

Ca marche aussi chez moi ! C'est fantastique de retrouver le scroll smile
Merci beaucoup à vous deux !
Marie

#16 Re : -1 »  Problème Broadcom BCM4313 » Le 05/10/2013, à 16:25

Marrrrrrrie
Réponses : 21

Bonjour,

J'ai le même problème avec la même carte wifi (il me semble !): Impossible de se connecter au réseau alors que celui-ci est bien visible. Et ceci pour certains réseaux seulement.
J'ai essayé plusieurs canaux différents au niveau de la box, et ça ne change rien.

Le driver que j'utilise est 802.11 Linux STA driver, installé via le package bcmwl-kernel-source.

Et voici le résultat des différentes commandes "de base", dans mon cas:

 marie@pc:~>cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS"
 marie@pc:~>lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 413c:8197 Dell Computer Corp. 
Bus 001 Device 004: ID 1bcf:2895 Sunplus Innovation Technology Inc. 
Bus 002 Device 003: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
marie@pc:~>lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
0b:00.0 SD Host controller: O2 Micro, Inc. Device 8221 (rev 05)
marie@pc:~> lspci -nn | grep -i net
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
marie@pc:~>lspci -k
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
	Subsystem: Dell Device 0533
	Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
	Subsystem: Dell Device 0533
	Kernel driver in use: i915
	Kernel modules: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
	Subsystem: Dell Device 0533
	Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Dell Device 0533
	Kernel driver in use: mei
	Kernel modules: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
	Subsystem: Dell Device 0533
	Kernel driver in use: e1000e
	Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
	Subsystem: Dell Device 0533
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
	Subsystem: Dell Device 0533
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
	Subsystem: Dell Device 0533
	Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
	Subsystem: Dell Device 0533
	Kernel modules: iTCO_wdt
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
	Subsystem: Dell Device 0533
	Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
	Subsystem: Dell Device 0533
	Kernel modules: i2c-i801
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
	Subsystem: Dell Device 0015
	Kernel driver in use: wl
	Kernel modules: wl, bcma, brcmsmac
0b:00.0 SD Host controller: O2 Micro, Inc. Device 8221 (rev 05)
	Subsystem: Dell Device 0533
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci
marie@pc:~>sudo lshw -C network
  *-network               
       description: Ethernet interface
       produit: 82579LM Gigabit Network Connection
       fabriquant: Intel Corporation
       identifiant matériel: 19
       information bus: pci@0000:00:19.0
       nom logique: eth2
       version: 04
       numéro de série: f0:1f:af:28:f9:9e
       taille: 100Mbit/s
       capacité: 1Gbit/s
       bits: 32 bits
       horloge: 33MHz
       fonctionnalités: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.1.29 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       ressources: irq:44 mémoire:f7e00000-f7e1ffff mémoire:f7e39000-f7e39fff portE/S:f080(taille=32)
  *-network
       description: Interface réseau sans fil
       produit: BCM4313 802.11bgn Wireless Network Adapter
       fabriquant: Broadcom Corporation
       identifiant matériel: 0
       information bus: pci@0000:02:00.0
       nom logique: eth1
       version: 01
       numéro de série: 84:4b:f5:15:5b:70
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=wl0 driverversion=6.20.155.1 (r326264) latency=0 multicast=yes wireless=IEEE 802.11abg
       ressources: irq:17 mémoire:f7d00000-f7d03fff
marie@pc:~>lsmod
Module                  Size  Used by
michael_mic            12612  4 
arc4                   12529  2 
snd_hda_codec_hdmi     32474  1 
snd_hda_codec_idt      70795  1 
rfcomm                 47604  12 
bnep                   18281  2 
binfmt_misc            17540  1 
lib80211_crypt_tkip    17390  0 
dell_wmi               12681  0 
sparse_keymap          13890  1 dell_wmi
ppdev                  17113  0 
wl                   3074895  0 
snd_hda_intel          33719  3 
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              17764  1 snd_hda_codec
snd_pcm                97275  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13324  0 
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61929  2 snd_seq_midi,snd_seq_midi_event
snd_timer              29990  2 snd_pcm,snd_seq
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
wmi                    19256  1 dell_wmi
parport_pc             32866  0 
cfg80211              205774  1 wl
lib80211               14381  2 lib80211_crypt_tkip,wl
snd                    79041  16 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
uvcvideo               72627  0 
videodev               98259  1 uvcvideo
mac_hid                13253  0 
dell_laptop            18119  0 
dcdbas                 14490  1 dell_laptop
psmouse                97519  0 
btusb                  18332  2 
bluetooth             180113  23 rfcomm,bnep,btusb
i915                  478239  3 
serio_raw              13211  1 
v4l2_compat_ioctl32    17128  1 videodev
drm_kms_helper         46978  1 i915
drm                   241971  4 i915,drm_kms_helper
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
mei                    41616  0 
lp                     17799  0 
i2c_algo_bit           13423  1 i915
parport                46562  3 ppdev,parport_pc,lp
video                  19651  1 i915
sdhci_pci              18826  0 
sdhci                  33205  1 sdhci_pci
e1000e                156873  0 
 marie@pc:~>iwconfig
lo        no wireless extensions.

eth2      no wireless extensions.

eth1      IEEE 802.11abg  ESSID:"o2-WLAN58"  
          Mode:Managed  Frequency:2.447 GHz  Access Point: 84:9C:A6:E5:BF:74   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
 marie@pc:~>ifconfig
eth1      Link encap:Ethernet  HWaddr 84:4b:f5:15:5b:70  
          adr inet6: fe80::864b:f5ff:fe15:5b70/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:30 erreurs:0 :0 overruns:0 frame:23039
          TX packets:449 errors:207 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          Octets reçus:4920 (4.9 KB) Octets transmis:101533 (101.5 KB)
          Interruption:17 

eth2      Link encap:Ethernet  HWaddr f0:1f:af:28:f9:9e  
          inet adr:192.168.1.29  Bcast:192.168.1.255  Masque:255.255.255.0
          adr inet6: fe80::f21f:afff:fe28:f99e/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:11213 erreurs:0 :0 overruns:0 frame:0
          TX packets:9351 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          Octets reçus:9056359 (9.0 MB) Octets transmis:1442109 (1.4 MB)
          Interruption:20 Mémoire:f7e00000-f7e20000 

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:1420 erreurs:0 :0 overruns:0 frame:0
          TX packets:1420 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          Octets reçus:126428 (126.4 KB) Octets transmis:126428 (126.4 KB)
marie@pc:~>sudo iwlist scan
lo        Interface doesn't support scanning.

eth2      Interface doesn't support scanning.

eth1      Scan completed :
          Cell 01 - Address: 84:9C:A6:E5:BF:74
                    Channel:8
                    Frequency:2.447 GHz (Channel 8)
                    Quality=70/70  Signal level=-38 dBm  
                    Encryption key:on
                    ESSID:"o2-WLAN58"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 00096F322D574C414E3538
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 030108
                    IE: Unknown: 2A0104
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1A6E1017FF00000001000000000000000000000000000000000000
                    IE: Unknown: 3D1608050700000000000000000000000000000000000000
                    IE: Unknown: 3E0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                       Preauthentication Supported
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 0B050001097A12
                    IE: Unknown: 7F0101
                    IE: Unknown: DD8B0050F204104A00011010440001021041000100103B0001031047001000000000000000030000849CA6E5BF731021000B436F72706F726174696F6E1023000941525637353244505710240007312E30312E31391042000A333034323031373635381054000800060050F204000110110014576972656C65737320526F757465722857464129100800020004
                    IE: Unknown: 0706444520010D10
                    IE: Unknown: DD1E00904C336E1017FF00000001000000000000000000000000000000000000
                    IE: Unknown: DD1A00904C3408050700000000000000000000000000000000000000
          Cell 02 - Address: 00:04:0E:D6:4B:F0
                    Channel:8
                    Frequency:2.447 GHz (Channel 8)
                    Quality=34/70  Signal level=-76 dBm  
                    Encryption key:on
                    ESSID:"fsknet"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 000666736B6E6574
                    IE: Unknown: 010482848B96
                    IE: Unknown: 030108
                    IE: Unknown: 050C020300000000000000000000
                    IE: Unknown: 2A0107
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32080C1218243048606C
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
          Cell 03 - Address: 00:16:38:B1:F8:11
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=35/70  Signal level=-75 dBm  
                    Encryption key:on
                    ESSID:"Evus-Bobbonius"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 000E457675732D426F62626F6E697573
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010004
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD060010180205F0
          Cell 04 - Address: 00:1C:DF:54:B1:A8
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=19/70  Signal level=-91 dBm  
                    Encryption key:on
                    ESSID:"Belkin_G_Plus_MIMO_54B1A8"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 001942656C6B696E5F475F506C75735F4D494D4F5F353442314138
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 03010B
                    IE: Unknown: 32040C183060
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 050400010000
                    IE: Unknown: 2A0100
                    IE: Unknown: DD07000C4307000000
          Cell 05 - Address: 80:C6:AB:2C:DC:E1
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=25/70  Signal level=-85 dBm  
                    Encryption key:on
                    ESSID:"Thom_D0042195"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 000D54686F6D5F4430303432313935
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010000
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1A7C181BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D160B081100000000000000000000000000000000000000
                    IE: Unknown: DD090010180200F00C0000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
          Cell 06 - Address: 00:23:08:AD:4F:8B
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=21/70  Signal level=-89 dBm  
                    Encryption key:on
                    ESSID:"mother"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 00066D6F74686572
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010000
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00
                    IE: Unknown: 2D1A0E101BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D160B0F0A00000000000000000000000000000000000000
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0A00037F04010020000000
                    IE: Unknown: 0706444520010D14
                    IE: Unknown: DD050050F20500
                    IE: Unknown: DD130050F204104A0001101044000102103C000103
          Cell 07 - Address: 00:24:FE:11:24:3F
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=19/70  Signal level=-91 dBm  
                    Encryption key:on
                    ESSID:"FRITZ!Box Fon WLAN 7113"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 0017465249545A21426F7820466F6E20574C414E2037313133
                    IE: Unknown: 010482848B96
                    IE: Unknown: 030101
                    IE: Unknown: 050C010300000000000000000000
                    IE: Unknown: 2A0107
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32080C1218243048606C
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
          Cell 08 - Address: 00:1C:DF:3E:8F:D7
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=54/70  Signal level=-56 dBm  
                    Encryption key:on
                    ESSID:"belkin54g"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              12 Mb/s; 24 Mb/s; 36 Mb/s
                    Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 000962656C6B696E353467
                    IE: Unknown: 010882848B960C183048
                    IE: Unknown: 030101
                    IE: Unknown: 050400010000
                    IE: Unknown: 07064E4C20010D14
                    IE: Unknown: 2A0102
                    IE: Unknown: 32041224606C
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                       Preauthentication Supported
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
          Cell 09 - Address: 02:26:4D:5D:E3:DB
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=12/70  Signal level=-98 dBm  
                    Encryption key:on
                    ESSID:"EasyBox-367C34"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 000E45617379426F782D333637433334
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 030101
                    IE: Unknown: 32040C183060
                    IE: Unknown: 0706444520010D14
                    IE: Unknown: 33082001020304050607
                    IE: Unknown: 33082105060708090A0B
                    IE: Unknown: DD0E0050F204104A0001101044000102
                    IE: Unknown: 050400010000
                    IE: Unknown: 2A0104
                    IE: Unknown: 2D1A6E1017FFFF000001000000000000000000000000000000000000
                    IE: Unknown: 3D1601000100000000000000000000000000000000000000
                    IE: Unknown: 7F0101
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                       Preauthentication Supported
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 0B050000347A12
                    IE: Unknown: DD1E00904C336E1017FFFF000001000000000000000000000000000000000000
                    IE: Unknown: DD1A00904C3401000100000000000000000000000000000000000000
          Cell 10 - Address: 00:1F:3F:18:D8:21
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=35/70  Signal level=-75 dBm  
                    Encryption key:on
                    ESSID:"WLAN-001F3F18D821"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 0011574C414E2D303031463346313844383231
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030101
                    IE: Unknown: 050400010000
                    IE: Unknown: 200100
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0A00037F04010000000000
                    IE: Unknown: 0706444520010D14
          Cell 11 - Address: F8:3D:FF:9E:DD:05
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=32/70  Signal level=-78 dBm  
                    Encryption key:on
                    ESSID:"WLAN-DD0547"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 000B574C414E2D444430353437
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030106
                    IE: Unknown: 050400010000
                    IE: Unknown: 2A0102
                    IE: Unknown: 2F0102
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1AFC181BFFFF000001000000000000000000000000000000000000
                    IE: Unknown: 3D1606001300000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F0101
                    IE: Unknown: DD270050F204104A000110104400010210470010387F881F71E2D6274A76FDF0C43DCC3D103C000103
                    IE: Unknown: DD090010180200F0050000
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
          Cell 12 - Address: 9C:C7:A6:0B:E7:84
                    Channel:3
                    Frequency:2.422 GHz (Channel 3)
                    Quality=21/70  Signal level=-89 dBm  
                    Encryption key:on
                    ESSID:"Quarkschachtel"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 000E517561726B73636861636874656C
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030103
                    IE: Unknown: 050400010000
                    IE: Unknown: 0706444520010D14
                    IE: Unknown: 2A0102
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1ACE111BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1603051300000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101010003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0C00040E010102010000000000
                    IE: Unknown: DD270050F204104A000110104400010210470010A2281AAA89D65C033B289CC7A60BE710103C000103
          Cell 13 - Address: 9C:C7:A6:E8:68:10
                    Channel:4
                    Frequency:2.427 GHz (Channel 4)
                    Quality=35/70  Signal level=-75 dBm  
                    Encryption key:on
                    ESSID:"FRITZ!Box Fon WLAN 7360 SL"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 001A465249545A21426F7820466F6E20574C414E203733363020534C
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030104
                    IE: Unknown: 050400010000
                    IE: Unknown: 0706444520010D14
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1AEE111BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1604051700000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101010003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0C00040E010102010000000000
                    IE: Unknown: DD270050F204104A0001101044000102104700105A131660A88FE644D39C9CC7A6E86810103C000103
          Cell 14 - Address: 00:1F:3F:ED:BF:86
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=19/70  Signal level=-91 dBm  
                    Encryption key:on
                    ESSID:"FRITZ!Box Fon WLAN 7113"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 0017465249545A21426F7820466F6E20574C414E2037313133
                    IE: Unknown: 010482848B96
                    IE: Unknown: 030106
                    IE: Unknown: 050C010300000000000000000000
                    IE: Unknown: 2A0107
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32080C1218243048606C
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
          Cell 15 - Address: 00:1A:2A:23:22:37
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=18/70  Signal level=-92 dBm  
                    Encryption key:on
                    ESSID:"sandra"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 80ms ago
                    IE: Unknown: 000673616E647261
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030106
                    IE: Unknown: 050400010000
                    IE: Unknown: 2A0102
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00
marie@pc:~>cat  /etc/network/interfaces
auto lo
iface lo inet loopback
marie@pc:~>nm-tool 

NetworkManager Tool

State: connected (global)

- Device: eth1 -----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            wl
  State:             disconnected
  Default:           no
  HW Address:        84:4B:F5:15:5B:70

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points 
    belkin54g:       Infra, 00:1C:DF:3E:8F:D7, Freq 2412 MHz, Rate 54 Mb/s, Strength 65 WPA WPA2
    Evus-Bobbonius:  Infra, 00:16:38:B1:F8:11, Freq 2462 MHz, Rate 54 Mb/s, Strength 44 WPA2
    FRITZ!Box Fon WLAN 7360 SL: Infra, 9C:C7:A6:E8:68:10, Freq 2427 MHz, Rate 54 Mb/s, Strength 40 WPA WPA2
    WLAN-001F3F18D821: Infra, 00:1F:3F:18:D8:21, Freq 2412 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2
    fsknet:          Infra, 00:04:0E:D6:4B:F0, Freq 2447 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2
    WLAN-DD0547:     Infra, F8:3D:FF:9E:DD:05, Freq 2437 MHz, Rate 54 Mb/s, Strength 32 WPA2
    Thom_D0042195:   Infra, 80:C6:AB:2C:DC:E1, Freq 2462 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2
    Belkin_G_Plus_MIMO_54B1A8: Infra, 00:1C:DF:54:B1:A8, Freq 2462 MHz, Rate 54 Mb/s, Strength 15 WPA2
    sandra:          Infra, 00:1A:2A:23:22:37, Freq 2437 MHz, Rate 54 Mb/s, Strength 12 WEP
    mother:          Infra, 00:23:08:AD:4F:8B, Freq 2462 MHz, Rate 54 Mb/s, Strength 15 WPA WPA2
    SoWasDennNun2:   Infra, 00:1C:4A:D0:2B:A7, Freq 2447 MHz, Rate 54 Mb/s, Strength 10 WPA WPA2
    o2-WLAN58:       Infra, 84:9C:A6:E5:BF:74, Freq 2447 MHz, Rate 54 Mb/s, Strength 100 WPA2
    FRITZ!Box Fon WLAN 7113: Infra, 00:1F:3F:ED:BF:86, Freq 2437 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2
    FRITZ!Box Fon WLAN 7113: Infra, 00:24:FE:11:24:3F, Freq 2412 MHz, Rate 54 Mb/s, Strength 12 WPA WPA2


- Device: eth2  [Connexion filaire 1] ------------------------------------------
  Type:              Wired
  Driver:            e1000e
  State:             connected
  Default:           yes
  HW Address:        F0:1F:AF:28:F9:9E

  Capabilities:
    Carrier Detect:  yes
    Speed:           100 Mb/s

  Wired Properties
    Carrier:         on

  IPv4 Settings:
    Address:         192.168.1.29
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.1.1

    DNS:             192.168.1.1

marie@pc:~>uname -r -m
3.2.0-54-generic x86_64
marie@pc:~>sudo rfkill list
0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
1: dell-wifi: Wireless LAN
	Soft blocked: no
	Hard blocked: no
2: dell-bluetooth: Bluetooth
	Soft blocked: no
	Hard blocked: no
3: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
4: brcmwl-0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

Merci de votre aide !
Marie

#17 Re : -1 »  Problème Broadcom BCM4313 » Le 06/10/2013, à 00:20

Marrrrrrrie
Réponses : 21

Merci beaucoup.
J'ai testé les commandes et malheureusement ça n'a pas marché.
L'installation de firmware-b43-installer a donné une erreur:
"Unsupported device(s) found: PCI id 14e4:4727"
Mais le package a quand même l'air d'être installé.
Après redémarrage de l'ordi, le réseau wifi a complétement disparu du network manager.
Vous avez une autre idée ?
Marie

#18 Re : -1 »  Problème Broadcom BCM4313 » Le 06/10/2013, à 10:53

Marrrrrrrie
Réponses : 21

Merci beaucoup ! En faisant cette commande et en rééditant le fichier /etc/modules, j'ai récupéré le module wifi dans network manager.
La situation est exactement comme précédemment du coup...
Vous auriez pas une autre idée ?
Marie

#19 Re : -1 »  Problème Broadcom BCM4313 » Le 06/10/2013, à 16:50

Marrrrrrrie
Réponses : 21

Salut Toutafai,
J'ai essayé de changer le cryptage, qui était déjà réglé en WPA2 AES uniquement, et ça n'a rien changé. J'ai aussi essayé plusieurs canaux différents, mais sans succès non plus.
Est-ce qu'il y a d'autres paramètres de la box à changer ?
Meric,
Marie

#20 Re : -1 »  Problème Broadcom BCM4313 » Le 07/10/2013, à 08:19

Marrrrrrrie
Réponses : 21

Oui, et il me semble que j'avais essaye d'enregistrer l'adresse MAC de mon pc, mais que ca n'avait pas marche.
Je reessaye ce soir !
Marie

#21 Re : -1 »  Problème Broadcom BCM4313 » Le 07/10/2013, à 20:01

Marrrrrrrie
Réponses : 21

Merci beaucoup pour vos réponses.
Par "ça n'a pas marché" je voulais dire que ça n'avait pas aidé d'activer le filtrage des adresses MAC.
Par contre, j'ai à nouveau essayé de changer les paramètres de cryptage, et ça fonctionne lorsque la box est paramétrée uniquement en TKIP (je n'avais pas testé TKIP uniquement la dernière fois, je crois). Mais ça ne se connecte toujours pas quand elle est paramétrée en WPA2 !
Donc j'ai trouvé une solution pour chez moi, ce qui est déjà super, mais pas pour les réseaux wifis dont je ne peux pas changer les paramètres...
Marie

#22 Re : -1 »  Problème Broadcom BCM4313 » Le 08/10/2013, à 23:07

Marrrrrrrie
Réponses : 21

Merci beaucoup, je vais tester !
Marie

#23 Re : -1 »  Problème Broadcom BCM4313 » Le 26/10/2013, à 00:07

Marrrrrrrie
Réponses : 21

Salut Florian,
J'ai aussi remarqué que ma carte wifi (indépendemment de tous les autres problèmes) ne détecte jamais les wifis sur les canaux les plus élevés (à partir de 10 ou 12, je me rappelle plus, mais j'avais testé). Un connaisseur du matériel informatique m'avait dit que c'était le cas pour certaines cartes, et donc je n'avais pas creusé le problème plus que ça... Du coup je ne suis pas sûre que ça soit lié à ubuntu !
Marie

#24 Re : -1 »  Son bizarre quand on defile + soucis APM » Le 16/07/2012, à 11:59

Marrrrrrrie
Réponses : 1

Bonjour, c'est moi rima qui n'arrive pas à limiter le nombre de load cycles (en bleu sur le graphe smile)

Voici mon rc.local:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

hdparm -B 255 /dev/sda
exit 0 

et voilà le resultat de grep APM /var/log/*

/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 254
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 128
/var/log/pm-powersave.log.1: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 254
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 254
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/pm-suspend.log.1: APM_level    = 128
/var/log/udev:ID_ATA_FEATURE_SET_APM=1
/var/log/udev:ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=128
/var/log/udev:ID_ATA_FEATURE_SET_APM_ENABLED=1
/var/log/udev:ID_ATA_FEATURE_SET_APM=1
/var/log/udev:ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=128
/var/log/udev:ID_ATA_FEATURE_SET_APM_ENABLED=1
/var/log/udev:ID_ATA_FEATURE_SET_APM=1
/var/log/udev:ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=128
/var/log/udev:ID_ATA_FEATURE_SET_APM_ENABLED=1
/var/log/udev:ID_ATA_FEATURE_SET_APM=1
/var/log/udev:ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=128
/var/log/udev:ID_ATA_FEATURE_SET_APM_ENABLED=1
/var/log/udev:ID_ATA_FEATURE_SET_APM=1
/var/log/udev:ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=128
/var/log/udev:ID_ATA_FEATURE_SET_APM_ENABLED=1

merci de votre aide !