Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails) *** mise à jour 12/10/2014 ***

nombre réponses : 25

#0 -1 »  Steam et HD4850 » Le 23/10/2014, à 11:44

Hizoka
Réponses : 6

Bonjour,

je cherche à jouer via Steam avec ma HD4850, le soucis c'est que tout lag enormement, je dois avoir environ 5fps...

J'utilise les pilotes libres et il n'existe plus de prise en charge de la carte par les drivers proprios, est-il possible de contourner le probleme ?

Pour info, Open Areana fonctionne très bien lui...

Le "direct rendering" est actif.

Voila alors si quelqu'un a une idée, je suis preneur !

PS : j'ai pas franchement envie de changer de carte graphique...

Merci à vous !

Quelques commandes :

glxinfo | grep "direct rendering"
direct rendering: Yes
lspci | grep "VGA compatible controller"
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
sudo lshw -enable pci -class display
  *-display               
       description: VGA compatible controller
       produit: RV770 [Radeon HD 4850]
       fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
       identifiant matériel: 0
       information bus: pci@0000:01:00.0
       version: 00
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
       configuration: driver=radeon latency=0
       ressources: irq:56 mémoire:d0000000-dfffffff mémoire:fe6e0000-fe6effff portE/S:b000(taille=256) mémoire:fe6c0000-fe6dffff
grep /drivers/ /var/log/Xorg.0.log
[    15.895] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    15.895] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    15.896] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    15.897] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    15.897] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    15.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
glxgears
3387 frames in 5.0 seconds = 677.345 FPS
4063 frames in 5.0 seconds = 812.468 FPS
4464 frames in 5.0 seconds = 892.633 FPS
4226 frames in 5.0 seconds = 845.096 FPS
4056 frames in 5.0 seconds = 810.878 FPS

#1 Re : -1 »  Steam et HD4850 » Le 23/10/2014, à 21:26

Hizoka
Réponses : 6

C'est le cas pour les quelques jeux que j'ai testé.
Bien évidement aucun soucis sous windows.

glxinfo | grep OpenGL
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits)
OpenGL version string: 3.0 Mesa 10.4.0-devel
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:

#2 Re : -1 »  Steam et HD4850 » Le 23/10/2014, à 22:33

Hizoka
Réponses : 6

j'utilisais nomodeset pour démarrer en liveCD et sur les installations fraiches. Sans ça, impossible de charger l'interface graphique...

Depuis, on m'a donné la commande suivante en remplacement : radeon.dpm=0
et j'ai suivi les differents conseils...
http://forum.ubuntu-fr.org/viewtopic.php?id=1627201

Pour la version mesa j'ai testé differentes versions de differents ppa.
mais je dirais que cela vient de : https://launchpad.net/~xorg-edgers/+archive/ubuntu/ppa

Edit : je pige pas trop, je n'ai plus la commande radeon.dpm=0 dans mon grub ?!

#3 Re : -1 »  Steam et HD4850 » Hier à 20:47

Hizoka
Réponses : 6
cat /var/log/Xorg.0.log
[    10.673] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    10.673] X Protocol Version 11, Revision 0
[    10.673] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[    10.673] Current Operating System: Linux hizoka-pc 3.16.0-4-generic #9-Ubuntu SMP Mon Jul 14 11:55:55 UTC 2014 x86_64
[    10.673] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-generic root=UUID=8908fbc3-fe2a-4a89-8259-f255214d7ebb ro quiet splash vt.handoff=7
[    10.673] Build Date: 30 July 2014  12:21:54AM
[    10.673] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support) 
[    10.673] Current version of pixman: 0.30.2
[    10.673]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    10.673] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.673] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 24 20:44:50 2014
[    10.674] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    10.676] (==) No Layout section.  Using the first Screen section.
[    10.676] (==) No screen section available. Using defaults.
[    10.676] (**) |-->Screen "Default Screen Section" (0)
[    10.676] (**) |   |-->Monitor "<default monitor>"
[    10.676] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    10.676] (==) Automatically adding devices
[    10.676] (==) Automatically enabling devices
[    10.676] (==) Automatically adding GPU devices
[    10.676] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    10.676]    Entry deleted from font path.
[    10.676] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    10.676]    Entry deleted from font path.
[    10.676] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    10.676]    Entry deleted from font path.
[    10.676] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    10.676]    Entry deleted from font path.
[    10.676] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    10.676]    Entry deleted from font path.
[    10.676] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        built-ins
[    10.677] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    10.677] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.677] (II) Loader magic: 0x7f774772bd40
[    10.677] (II) Module ABI versions:
[    10.677]    X.Org ANSI C Emulation: 0.4
[    10.677]    X.Org Video Driver: 15.0
[    10.677]    X.Org XInput driver : 20.0
[    10.677]    X.Org Server Extension : 8.0
[    10.677] (II) xfree86: Adding drm device (/dev/dri/card0)
[    10.679] (--) PCI:*(0:1:0:0) 1002:9442:1043:026a rev 0, Mem @ 0xd0000000/268435456, 0xfe6e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[    10.679] Initializing built-in extension Generic Event Extension
[    10.679] Initializing built-in extension SHAPE
[    10.679] Initializing built-in extension MIT-SHM
[    10.679] Initializing built-in extension XInputExtension
[    10.679] Initializing built-in extension XTEST
[    10.679] Initializing built-in extension BIG-REQUESTS
[    10.679] Initializing built-in extension SYNC
[    10.679] Initializing built-in extension XKEYBOARD
[    10.679] Initializing built-in extension XC-MISC
[    10.679] Initializing built-in extension SECURITY
[    10.679] Initializing built-in extension XINERAMA
[    10.679] Initializing built-in extension XFIXES
[    10.679] Initializing built-in extension RENDER
[    10.679] Initializing built-in extension RANDR
[    10.679] Initializing built-in extension COMPOSITE
[    10.679] Initializing built-in extension DAMAGE
[    10.679] Initializing built-in extension MIT-SCREEN-SAVER
[    10.679] Initializing built-in extension DOUBLE-BUFFER
[    10.679] Initializing built-in extension RECORD
[    10.679] Initializing built-in extension DPMS
[    10.679] Initializing built-in extension Present
[    10.679] Initializing built-in extension DRI3
[    10.679] Initializing built-in extension X-Resource
[    10.679] Initializing built-in extension XVideo
[    10.679] Initializing built-in extension XVideo-MotionCompensation
[    10.679] Initializing built-in extension SELinux
[    10.679] Initializing built-in extension XFree86-VidModeExtension
[    10.679] Initializing built-in extension XFree86-DGA
[    10.679] Initializing built-in extension XFree86-DRI
[    10.679] Initializing built-in extension DRI2
[    10.679] (II) LoadModule: "glx"
[    10.681] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    10.688] (II) Module glx: vendor="X.Org Foundation"
[    10.688]    compiled for 1.15.1, module version = 1.0.0
[    10.688]    ABI class: X.Org Server Extension, version 8.0
[    10.688] (==) AIGLX enabled
[    10.688] Loading extension GLX
[    10.688] (==) Matched fglrx as autoconfigured driver 0
[    10.688] (==) Matched ati as autoconfigured driver 1
[    10.688] (==) Matched fglrx as autoconfigured driver 2
[    10.688] (==) Matched ati as autoconfigured driver 3
[    10.688] (==) Matched modesetting as autoconfigured driver 4
[    10.688] (==) Matched fbdev as autoconfigured driver 5
[    10.688] (==) Matched vesa as autoconfigured driver 6
[    10.688] (==) Assigned the driver to the xf86ConfigLayout
[    10.688] (II) LoadModule: "fglrx"
[    10.689] (WW) Warning, couldn't open module fglrx
[    10.689] (II) UnloadModule: "fglrx"
[    10.689] (II) Unloading fglrx
[    10.689] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    10.689] (II) LoadModule: "ati"
[    10.689] (WW) Warning, couldn't open module ati
[    10.689] (II) UnloadModule: "ati"
[    10.689] (II) Unloading ati
[    10.689] (EE) Failed to load module "ati" (module does not exist, 0)
[    10.689] (II) LoadModule: "modesetting"
[    10.689] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    10.690] (II) Module modesetting: vendor="X.Org Foundation"
[    10.690]    compiled for 1.15.0, module version = 0.8.1
[    10.690]    Module class: X.Org Video Driver
[    10.690]    ABI class: X.Org Video Driver, version 15.0
[    10.690] (II) LoadModule: "fbdev"
[    10.690] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    10.690] (II) Module fbdev: vendor="X.Org Foundation"
[    10.690]    compiled for 1.15.0, module version = 0.4.4
[    10.690]    Module class: X.Org Video Driver
[    10.690]    ABI class: X.Org Video Driver, version 15.0
[    10.690] (II) LoadModule: "vesa"
[    10.690] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    10.691] (II) Module vesa: vendor="X.Org Foundation"
[    10.691]    compiled for 1.15.0, module version = 2.3.3
[    10.691]    Module class: X.Org Video Driver
[    10.691]    ABI class: X.Org Video Driver, version 15.0
[    10.691] (==) Matched fglrx as autoconfigured driver 0
[    10.691] (==) Matched ati as autoconfigured driver 1
[    10.691] (==) Matched fglrx as autoconfigured driver 2
[    10.691] (==) Matched ati as autoconfigured driver 3
[    10.691] (==) Matched modesetting as autoconfigured driver 4
[    10.691] (==) Matched fbdev as autoconfigured driver 5
[    10.691] (==) Matched vesa as autoconfigured driver 6
[    10.691] (==) Assigned the driver to the xf86ConfigLayout
[    10.691] (II) LoadModule: "fglrx"
[    10.691] (WW) Warning, couldn't open module fglrx
[    10.691] (II) UnloadModule: "fglrx"
[    10.691] (II) Unloading fglrx
[    10.691] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    10.691] (II) LoadModule: "ati"
[    10.692] (WW) Warning, couldn't open module ati
[    10.692] (II) UnloadModule: "ati"
[    10.692] (II) Unloading ati
[    10.692] (EE) Failed to load module "ati" (module does not exist, 0)
[    10.692] (II) LoadModule: "modesetting"
[    10.692] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    10.692] (II) Module modesetting: vendor="X.Org Foundation"
[    10.692]    compiled for 1.15.0, module version = 0.8.1
[    10.692]    Module class: X.Org Video Driver
[    10.692]    ABI class: X.Org Video Driver, version 15.0
[    10.692] (II) UnloadModule: "modesetting"
[    10.692] (II) Unloading modesetting
[    10.692] (II) Failed to load module "modesetting" (already loaded, 0)
[    10.692] (II) LoadModule: "fbdev"
[    10.692] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    10.692] (II) Module fbdev: vendor="X.Org Foundation"
[    10.692]    compiled for 1.15.0, module version = 0.4.4
[    10.692]    Module class: X.Org Video Driver
[    10.692]    ABI class: X.Org Video Driver, version 15.0
[    10.692] (II) UnloadModule: "fbdev"
[    10.692] (II) Unloading fbdev
[    10.692] (II) Failed to load module "fbdev" (already loaded, 0)
[    10.692] (II) LoadModule: "vesa"
[    10.692] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    10.692] (II) Module vesa: vendor="X.Org Foundation"
[    10.692]    compiled for 1.15.0, module version = 2.3.3
[    10.692]    Module class: X.Org Video Driver
[    10.692]    ABI class: X.Org Video Driver, version 15.0
[    10.692] (II) UnloadModule: "vesa"
[    10.692] (II) Unloading vesa
[    10.693] (II) Failed to load module "vesa" (already loaded, 0)
[    10.693] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    10.693] (II) FBDEV: driver for framebuffer: fbdev
[    10.693] (II) VESA: driver for VESA chipsets: vesa
[    10.693] (++) using VT number 7

[    10.693] (II) modesetting(0): using drv /dev/dri/card0
[    10.693] (WW) Falling back to old probe method for modesetting
[    10.693] (WW) Falling back to old probe method for fbdev
[    10.693] (II) Loading sub module "fbdevhw"
[    10.693] (II) LoadModule: "fbdevhw"
[    10.693] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    10.693] (II) Module fbdevhw: vendor="X.Org Foundation"
[    10.693]    compiled for 1.15.1, module version = 0.0.2
[    10.693]    ABI class: X.Org Video Driver, version 15.0
[    10.694] (WW) Falling back to old probe method for vesa
[    10.694] (II) modesetting(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    10.694] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
[    10.694] (==) modesetting(0): RGB weight 888
[    10.694] (==) modesetting(0): Default visual is TrueColor
[    10.694] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
[    10.753] (II) modesetting(0): Output HDMI-0 has no monitor section
[    10.783] (II) modesetting(0): Output VGA-0 has no monitor section
[    10.804] (II) modesetting(0): Output DIN-0 has no monitor section
[    10.834] (II) modesetting(0): Output DVI-0 has no monitor section
[    10.894] (II) modesetting(0): EDID for output HDMI-0
[    10.924] (II) modesetting(0): EDID for output VGA-0
[    10.924] (II) modesetting(0): Manufacturer: HIQ  Model: 5005  Serial#: 20050830
[    10.924] (II) modesetting(0): Year: 2005  Week: 35
[    10.924] (II) modesetting(0): EDID Version: 1.3
[    10.924] (II) modesetting(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    10.924] (II) modesetting(0): Sync:  Separate
[    10.924] (II) modesetting(0): Max Image Size [cm]: horiz.: 37  vert.: 30
[    10.924] (II) modesetting(0): Gamma: 2.20
[    10.924] (II) modesetting(0): DPMS capabilities: Off; RGB/Color Display
[    10.924] (II) modesetting(0): First detailed timing is preferred mode
[    10.924] (II) modesetting(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    10.924] (II) modesetting(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    10.924] (II) modesetting(0): Supported established timings:
[    10.924] (II) modesetting(0): 720x400@70Hz
[    10.924] (II) modesetting(0): 640x480@60Hz
[    10.924] (II) modesetting(0): 640x480@75Hz
[    10.924] (II) modesetting(0): 800x600@56Hz
[    10.924] (II) modesetting(0): 800x600@60Hz
[    10.924] (II) modesetting(0): 800x600@72Hz
[    10.924] (II) modesetting(0): 800x600@75Hz
[    10.924] (II) modesetting(0): 832x624@75Hz
[    10.924] (II) modesetting(0): 1024x768@60Hz
[    10.924] (II) modesetting(0): 1024x768@70Hz
[    10.924] (II) modesetting(0): 1024x768@75Hz
[    10.924] (II) modesetting(0): 1280x1024@75Hz
[    10.924] (II) modesetting(0): 1152x864@75Hz
[    10.924] (II) modesetting(0): Manufacturer's mask: 0
[    10.924] (II) modesetting(0): Supported standard timings:
[    10.924] (II) modesetting(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    10.924] (II) modesetting(0): Supported detailed timing:
[    10.924] (II) modesetting(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    10.924] (II) modesetting(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    10.924] (II) modesetting(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    10.924] (II) modesetting(0): Supported detailed timing:
[    10.924] (II) modesetting(0): clock: 28.3 MHz   Image Size:  376 x 301 mm
[    10.924] (II) modesetting(0): h_active: 720  h_sync: 738  h_sync_end 846 h_blank_end 900 h_border: 0
[    10.924] (II) modesetting(0): v_active: 400  v_sync: 413  v_sync_end 415 v_blanking: 449 v_border: 0
[    10.924] (II) modesetting(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[    10.924] (II) modesetting(0): Monitor name: B90A
[    10.924] (II) modesetting(0): EDID (in hex):
[    10.924] (II) modesetting(0):       00ffffffffffff00213105508ef33101
[    10.924] (II) modesetting(0):       230f010308251e782aee95a3544c9926
[    10.924] (II) modesetting(0):       0f5054a7ef8081800101010101010101
[    10.924] (II) modesetting(0):       010101010101302a009851002a403070
[    10.924] (II) modesetting(0):       1300782d1100001e100bd0b420903110
[    10.924] (II) modesetting(0):       126cd200782d1100001c000000fd0038
[    10.924] (II) modesetting(0):       4b1f510e000a202020202020000000fc
[    10.924] (II) modesetting(0):       00423930410a2020202020202020008c
[    10.924] (II) modesetting(0): Printing probed modes for output VGA-0
[    10.924] (II) modesetting(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    10.924] (II) modesetting(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    10.924] (II) modesetting(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    10.924] (II) modesetting(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    10.924] (II) modesetting(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    10.924] (II) modesetting(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    10.924] (II) modesetting(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    10.924] (II) modesetting(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    10.924] (II) modesetting(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    10.924] (II) modesetting(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    10.924] (II) modesetting(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    10.924] (II) modesetting(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    10.924] (II) modesetting(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    10.924] (II) modesetting(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 413 415 449 -hsync +vsync (31.5 kHz e)
[    10.924] (II) modesetting(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    10.948] (II) modesetting(0): EDID for output DIN-0
[    10.978] (II) modesetting(0): EDID for output DVI-0
[    10.978] (II) modesetting(0): Manufacturer: SAM  Model: 46f  Serial#: 0
[    10.978] (II) modesetting(0): Year: 2008  Week: 22
[    10.978] (II) modesetting(0): EDID Version: 1.3
[    10.978] (II) modesetting(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    10.978] (II) modesetting(0): Sync:  Separate
[    10.978] (II) modesetting(0): Max Image Size [cm]: horiz.: 88  vert.: 50
[    10.978] (II) modesetting(0): Gamma: 2.20
[    10.978] (II) modesetting(0): DPMS capabilities: Off; RGB/Color Display
[    10.978] (II) modesetting(0): First detailed timing is preferred mode
[    10.978] (II) modesetting(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    10.978] (II) modesetting(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    10.978] (II) modesetting(0): Supported established timings:
[    10.978] (II) modesetting(0): 720x400@70Hz
[    10.978] (II) modesetting(0): 640x480@60Hz
[    10.978] (II) modesetting(0): 640x480@72Hz
[    10.978] (II) modesetting(0): 640x480@75Hz
[    10.978] (II) modesetting(0): 800x600@60Hz
[    10.978] (II) modesetting(0): 800x600@72Hz
[    10.978] (II) modesetting(0): 800x600@75Hz
[    10.978] (II) modesetting(0): 1024x768@60Hz
[    10.978] (II) modesetting(0): 1024x768@70Hz
[    10.978] (II) modesetting(0): 1024x768@75Hz
[    10.978] (II) modesetting(0): 1280x1024@75Hz
[    10.978] (II) modesetting(0): Manufacturer's mask: 0
[    10.978] (II) modesetting(0): Supported standard timings:
[    10.978] (II) modesetting(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    10.978] (II) modesetting(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    10.978] (II) modesetting(0): Supported detailed timing:
[    10.978] (II) modesetting(0): clock: 138.5 MHz   Image Size:  886 x 498 mm
[    10.978] (II) modesetting(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    10.978] (II) modesetting(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    10.978] (II) modesetting(0): Supported detailed timing:
[    10.978] (II) modesetting(0): clock: 85.5 MHz   Image Size:  886 x 498 mm
[    10.978] (II) modesetting(0): h_active: 1360  h_sync: 1424  h_sync_end 1536 h_blank_end 1792 h_border: 0
[    10.978] (II) modesetting(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 795 v_border: 0
[    10.978] (II) modesetting(0): Ranges: V min: 60 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[    10.978] (II) modesetting(0): Monitor name: SAMSUNG
[    10.978] (II) modesetting(0): EDID (in hex):
[    10.978] (II) modesetting(0):       00ffffffffffff004c2d6f0400000000
[    10.978] (II) modesetting(0):       16120103685832782aee91a3544c9926
[    10.978] (II) modesetting(0):       0f5054adcf008180a940010101010101
[    10.978] (II) modesetting(0):       0101010101011a3680a070381f403020
[    10.978] (II) modesetting(0):       350076f23100001a662150b051001b30
[    10.978] (II) modesetting(0):       4070360076f23100001e000000fd003c
[    10.978] (II) modesetting(0):       4b1e5111000a202020202020000000fc
[    10.978] (II) modesetting(0):       0053414d53554e470a202020202000b3
[    10.978] (II) modesetting(0): Printing probed modes for output DVI-0
[    10.978] (II) modesetting(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[    10.978] (II) modesetting(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    10.978] (II) modesetting(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    10.978] (II) modesetting(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    10.978] (II) modesetting(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    10.978] (II) modesetting(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    10.978] (II) modesetting(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    10.978] (II) modesetting(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    10.978] (II) modesetting(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    10.978] (II) modesetting(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    10.978] (II) modesetting(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    10.978] (II) modesetting(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    10.978] (II) modesetting(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    10.978] (II) modesetting(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    10.978] (II) modesetting(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    10.978] (II) modesetting(0): Output HDMI-0 disconnected
[    10.978] (II) modesetting(0): Output VGA-0 connected
[    10.978] (II) modesetting(0): Output DIN-0 disconnected
[    10.978] (II) modesetting(0): Output DVI-0 connected
[    10.978] (II) modesetting(0): Using exact sizes for initial modes
[    10.978] (II) modesetting(0): Output VGA-0 using initial mode 1280x1024
[    10.978] (II) modesetting(0): Output DVI-0 using initial mode 1280x1024
[    10.978] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    10.978] (==) modesetting(0): DPI set to (96, 96)
[    10.979] (II) Loading sub module "fb"
[    10.979] (II) LoadModule: "fb"
[    10.979] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.979] (II) Module fb: vendor="X.Org Foundation"
[    10.979]    compiled for 1.15.1, module version = 1.0.0
[    10.979]    ABI class: X.Org ANSI C Emulation, version 0.4
[    10.979] (II) Loading sub module "shadow"
[    10.979] (II) LoadModule: "shadow"
[    10.979] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    10.980] (II) Module shadow: vendor="X.Org Foundation"
[    10.980]    compiled for 1.15.1, module version = 1.1.0
[    10.980]    ABI class: X.Org ANSI C Emulation, version 0.4
[    10.980] (II) UnloadModule: "fbdev"
[    10.980] (II) Unloading fbdev
[    10.980] (II) UnloadSubModule: "fbdevhw"
[    10.980] (II) Unloading fbdevhw
[    10.980] (II) UnloadModule: "vesa"
[    10.980] (II) Unloading vesa
[    10.980] (==) Depth 24 pixmap format is 32 bpp
[    10.982] (==) modesetting(0): Backing store enabled
[    10.982] (==) modesetting(0): Silken mouse enabled
[    10.982] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    10.982] (==) modesetting(0): DPMS enabled
[    11.028] (--) RandR disabled
[    11.032] (II) SELinux: Disabled on system
[    11.033] (II) AIGLX: Screen 0 is not DRI2 capable
[    11.033] (EE) AIGLX: reverting to software rendering
[    11.049] (II) AIGLX: Loaded and initialized swrast
[    11.049] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    11.049] (II) modesetting(0): Damage tracking initialized
[    11.049] (II) modesetting(0): Setting screen physical size to 338 x 270
[    11.062] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    11.066] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    11.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.066] (II) LoadModule: "evdev"
[    11.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.067] (II) Module evdev: vendor="X.Org Foundation"
[    11.067]    compiled for 1.15.0, module version = 2.8.2
[    11.067]    Module class: X.Org XInput Driver
[    11.067]    ABI class: X.Org XInput driver, version 20.0
[    11.067] (II) Using input driver 'evdev' for 'Power Button'
[    11.067] (**) Power Button: always reports core events
[    11.067] (**) evdev: Power Button: Device: "/dev/input/event1"
[    11.067] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.067] (--) evdev: Power Button: Found keys
[    11.067] (II) evdev: Power Button: Configuring as keyboard
[    11.067] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    11.067] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    11.067] (**) Option "xkb_rules" "evdev"
[    11.067] (**) Option "xkb_model" "pc105"
[    11.067] (**) Option "xkb_layout" "fr"
[    11.067] (**) Option "xkb_variant" "latin9_nodeadkeys"
[    11.070] (II) XKB: reuse xkmfile /var/lib/xkb/server-FEC128768DA53B808E002DA9C388CBDE558017E8.xkm
[    11.071] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    11.071] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.071] (II) Using input driver 'evdev' for 'Power Button'
[    11.071] (**) Power Button: always reports core events
[    11.071] (**) evdev: Power Button: Device: "/dev/input/event0"
[    11.071] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.071] (--) evdev: Power Button: Found keys
[    11.071] (II) evdev: Power Button: Configuring as keyboard
[    11.071] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    11.071] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    11.071] (**) Option "xkb_rules" "evdev"
[    11.071] (**) Option "xkb_model" "pc105"
[    11.071] (**) Option "xkb_layout" "fr"
[    11.071] (**) Option "xkb_variant" "latin9_nodeadkeys"
[    11.071] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    11.071] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    11.072] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event4)
[    11.072] (II) No input driver specified, ignoring this device.
[    11.072] (II) This device may have been added with another device file.
[    11.072] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[    11.072] (II) No input driver specified, ignoring this device.
[    11.072] (II) This device may have been added with another device file.
[    11.072] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[    11.072] (II) No input driver specified, ignoring this device.
[    11.072] (II) This device may have been added with another device file.
[    11.073] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event9)
[    11.073] (II) No input driver specified, ignoring this device.
[    11.073] (II) This device may have been added with another device file.
[    11.073] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10)
[    11.073] (II) No input driver specified, ignoring this device.
[    11.073] (II) This device may have been added with another device file.
[    11.073] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event11)
[    11.073] (II) No input driver specified, ignoring this device.
[    11.073] (II) This device may have been added with another device file.
[    11.073] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event12)
[    11.073] (II) No input driver specified, ignoring this device.
[    11.073] (II) This device may have been added with another device file.
[    11.074] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event13)
[    11.074] (II) No input driver specified, ignoring this device.
[    11.074] (II) This device may have been added with another device file.
[    11.074] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[    11.074] (II) No input driver specified, ignoring this device.
[    11.074] (II) This device may have been added with another device file.
[    11.074] (II) config/udev: Adding input device STV06xx (/dev/input/event5)
[    11.074] (**) STV06xx: Applying InputClass "evdev keyboard catchall"
[    11.074] (II) Using input driver 'evdev' for 'STV06xx'
[    11.074] (**) STV06xx: always reports core events
[    11.074] (**) evdev: STV06xx: Device: "/dev/input/event5"
[    11.074] (--) evdev: STV06xx: Vendor 0x46d Product 0x8f0
[    11.074] (--) evdev: STV06xx: Found keys
[    11.074] (II) evdev: STV06xx: Configuring as keyboard
[    11.074] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/input/input8/event5"
[    11.074] (II) XINPUT: Adding extended input device "STV06xx" (type: KEYBOARD, id 8)
[    11.074] (**) Option "xkb_rules" "evdev"
[    11.074] (**) Option "xkb_model" "pc105"
[    11.074] (**) Option "xkb_layout" "fr"
[    11.074] (**) Option "xkb_variant" "latin9_nodeadkeys"
[    11.075] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    11.075] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    11.075] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    11.075] (**) Logitech USB Receiver: always reports core events
[    11.075] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    11.075] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[    11.075] (--) evdev: Logitech USB Receiver: Found keys
[    11.075] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    11.075] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/0003:046D:C517.0001/input/input5/event2"
[    11.075] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[    11.075] (**) Option "xkb_rules" "evdev"
[    11.075] (**) Option "xkb_model" "pc105"
[    11.075] (**) Option "xkb_layout" "fr"
[    11.075] (**) Option "xkb_variant" "latin9_nodeadkeys"
[    11.076] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    11.076] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    11.076] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    11.076] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    11.076] (**) Logitech USB Receiver: always reports core events
[    11.076] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[    11.076] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[    11.076] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[    11.076] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    11.076] (--) evdev: Logitech USB Receiver: Found relative axes
[    11.076] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    11.076] (--) evdev: Logitech USB Receiver: Found absolute axes
[    11.076] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    11.076] (--) evdev: Logitech USB Receiver: Found keys
[    11.076] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    11.076] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    11.076] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    11.076] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    11.076] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.076] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/0003:046D:C517.0002/input/input6/event3"
[    11.076] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    11.076] (**) Option "xkb_rules" "evdev"
[    11.076] (**) Option "xkb_model" "pc105"
[    11.076] (**) Option "xkb_layout" "fr"
[    11.076] (**) Option "xkb_variant" "latin9_nodeadkeys"
[    11.076] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    11.076] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    11.076] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    11.076] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    11.076] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    11.076] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    11.077] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    11.077] (II) No input driver specified, ignoring this device.
[    11.077] (II) This device may have been added with another device file.
[    15.302] (II) modesetting(0): EDID vendor "HIQ", prod id 20485
[    15.302] (II) modesetting(0): Using EDID range info for horizontal sync
[    15.302] (II) modesetting(0): Using EDID range info for vertical refresh
[    15.302] (II) modesetting(0): Printing DDC gathered Modelines:
[    15.302] (II) modesetting(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    15.302] (II) modesetting(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 413 415 449 -hsync +vsync (31.5 kHz e)
[    15.302] (II) modesetting(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.302] (II) modesetting(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    15.302] (II) modesetting(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    15.302] (II) modesetting(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.302] (II) modesetting(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    15.302] (II) modesetting(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    15.302] (II) modesetting(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    15.302] (II) modesetting(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    15.302] (II) modesetting(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.302] (II) modesetting(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    15.302] (II) modesetting(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    15.302] (II) modesetting(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    15.302] (II) modesetting(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    15.459] (II) modesetting(0): EDID vendor "HIQ", prod id 20485
[    15.459] (II) modesetting(0): Using hsync ranges from config file
[    15.459] (II) modesetting(0): Using vrefresh ranges from config file
[    15.459] (II) modesetting(0): Printing DDC gathered Modelines:
[    15.459] (II) modesetting(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    15.459] (II) modesetting(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 413 415 449 -hsync +vsync (31.5 kHz e)
[    15.459] (II) modesetting(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.459] (II) modesetting(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    15.459] (II) modesetting(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    15.459] (II) modesetting(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.459] (II) modesetting(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    15.459] (II) modesetting(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    15.459] (II) modesetting(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    15.460] (II) modesetting(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    15.460] (II) modesetting(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.460] (II) modesetting(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    15.460] (II) modesetting(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    15.460] (II) modesetting(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    15.460] (II) modesetting(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    15.902] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[    15.909] (II) XKB: reuse xkmfile /var/lib/xkb/server-22A701329B9AF4D29B503D0585438040CE80DCB5.xkm
[    16.765] (II) modesetting(0): Allocate new frame buffer 2880x1275 stride
[    17.310] (II) modesetting(0): EDID vendor "HIQ", prod id 20485
[    17.310] (II) modesetting(0): Using hsync ranges from config file
[    17.310] (II) modesetting(0): Using vrefresh ranges from config file
[    17.310] (II) modesetting(0): Printing DDC gathered Modelines:
[    17.310] (II) modesetting(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    17.310] (II) modesetting(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 413 415 449 -hsync +vsync (31.5 kHz e)
[    17.310] (II) modesetting(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    17.310] (II) modesetting(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    17.310] (II) modesetting(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    17.310] (II) modesetting(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    17.310] (II) modesetting(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    17.310] (II) modesetting(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    17.310] (II) modesetting(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    17.310] (II) modesetting(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    17.310] (II) modesetting(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    17.310] (II) modesetting(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    17.310] (II) modesetting(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    17.310] (II) modesetting(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    17.310] (II) modesetting(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
LIBGL_DEBUG=verbose glxgears
libGL: screen 0 does not appear to be DRI3 capable
libGL: screen 0 does not appear to be DRI2 capable
libGL: OpenDriver: trying /usr/lib/x86_64-linux-gnu/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so
libGL: Can't open configuration file /home/hizoka/.drirc: No such file or directory.
libGL: Can't open configuration file /home/hizoka/.drirc: No such file or directory.
3364 frames in 5.0 seconds = 672.695 FPS

merci de prendre le temps de te pencher sur mon soucis !

#4 Re : -1 »  [Résolu] Rsync besoin d'aide pour l'écriture de la commande » Hier à 10:41

Hizoka
Réponses : 4

faut le faire en 5 commandes.

rsync -az --delete "/home/Mon_Nom/Bibliothèque calibre" /"media/Mon_Nom/Mon-Disque-Externe/Bibliothèque calibre"
rsync -az --delete "/home/Mon_Nom/Documents" "/media/Mon_Nom/Mon-Disque-Externe/Documents"
rsync -az --delete "/home/Mon_Nom/Dropbox" "/media/Mon_Nom/Mon-Disque-Externe/Dropbox"
rsync -az --delete "/home/Mon_Nom/Images" "/media/Mon_Nom/Mon-Disque-Externe/Images"
rsync -az --delete "/home/Mon_Nom/Musique" "/media/Mon_Nom/Mon-Disque-Externe/Musique"

tu peux mettre tout ça dans un fichier sh ou tout mettre en une commande avec des &&.

Mais sinon il existe des interface graphique pas mal, perso j'utilise Back In Time qui est simple et efficace.

#5 Re : -1 »  [Résolu] Rsync besoin d'aide pour l'écriture de la commande » Hier à 12:00

Hizoka
Réponses : 4

ha ouais bien vu aussi ça !
bon au final ca demande autant de ligne mais c'est un truc au quel je ne pense jamais.

#6 Re : -1 »  [Résolu]Droits des dossiers montés fstab » Hier à 10:43

Hizoka
Réponses : 4

Salut,

as tu regardé et tésté : http://doc.ubuntu-fr.org/mount_fstab#dr … _du_volume

histoire déjà de voir si ca marche hors le fichier fstab

et apres tu peux tester les differentes options indiqués pour fstab un peu plus bas.

Peut etre indiquer "rw", umask...

#7 Re : -1 »  [Résolu]Droits des dossiers montés fstab » Hier à 13:48

Hizoka
Réponses : 4

désolé, je ne connais pas suffisamment le sujet, et je ne vois pas trop quoi te proposer.

bon courage.

#8 Re : -1 »  TarotClub, le jeu de Tarot libre! » Le 01/09/2014, à 16:49

Hizoka
Réponses : 158

et il pourrait être sympa de voir le chien lorsque tout le monde passe tongue

#9 Re : -1 »  TarotClub, le jeu de Tarot libre! » Le 15/09/2014, à 00:15

Hizoka
Réponses : 158

ouais ca c'est cool smile

#10 Re : -1 »  TarotClub, le jeu de Tarot libre! » Le 27/09/2014, à 17:51

Hizoka
Réponses : 158

le vert semble trop foncé, il faudrait l’éclaircir un peu, et en effet mettre un peu de couleur au cœur et au carreau.

Ex pour excuse est peut etre mieux en effet... mais 0A reste compréhensible !

Peut pas tester pour unity...

#11 Re : -1 »  TarotClub, le jeu de Tarot libre! » Le 30/09/2014, à 22:32

Hizoka
Réponses : 158

oui oui j'ai une icone dans le KMenu.

#12 Re : -1 »  TarotClub, le jeu de Tarot libre! » Le 09/10/2014, à 13:37

Hizoka
Réponses : 158

il faudrait passer ta maman sous ubuntu 14.04 qui est une LTS car 13.10 n'est plus maintenu.

Apres il faut voir quelle est la version de libqt5core5a dans 13.10...

#13 Re : -1 »  TarotClub, le jeu de Tarot libre! » Le 23/10/2014, à 13:00

Hizoka
Réponses : 158

cool cette progression smile

Perso je les trouve moins jolies les cartes.

Pour le serveur, encore une fois, je te propose le mien qui ne devrait pas bouger avant un sacré moment.

#14 Re : -1 »  Ubuntu-fr: signaler des erreurs et aider à améliorer le site » Le 28/09/2014, à 12:14

Hizoka
Réponses : 1369

perso je ne suis pas trop pour les popup. mais j'aime bien l'idée du baromètre de connaissance proposé un peu plus haut.

Pour le questionnaire de niveau, je pense en effet que ça peut bloquer des gens.

Je pense pas qu'il y ait forcement des choses à mettre en place, je pense surtout que c'est à nous de radoter lorsque l'on répond à un topic, en disant qu'il faut faire une recherche dans la doc et donner le lien.

#15 Re : -1 »  [pyqt4] MKV Extractor Qt » Le 08/10/2014, à 18:24

Hizoka
Réponses : 44

Encore une mise à jour :

Version 5.1.5 a écrit :

  * Merci à Marshall Banana pour
   - debian/control : utilisation de ${python3:Depends}
   - script de maintenance : renommé en prerm, correction de la purge des fichiers de config
   - mise à jour du fichier debian/rules
   - corrections dans la traduction Anglaise
  * Création d'une liste de codec suivant la liste de mkvmerge

#16 Re : -1 »  [Résolu] Comment publier une application java ? » Le 28/09/2014, à 12:16

Hizoka
Réponses : 7

dput n'envoie pas de fichier changelog mais des fichiers changes.

Pour avoir ces fichiers il faut créer les paquets depuis la commande debuild par exemple.

explique ce que tu fais exactement comme demarche et les fichiers que tu as.

#17 Re : -1 »  [Résolu] Comment publier une application java ? » Le 29/09/2014, à 11:04

Hizoka
Réponses : 7

c'est assez proche de ce que j'aurais fait, et le principal c'est que ça fonctionne wink

Un petit [resolu]

#18 Re : -1 »  [Résolu] Comment publier une application java ? » Le 29/09/2014, à 23:59

Hizoka
Réponses : 7

ouais ou tu peux recreer une page dans la doc pour tout bien détailler wink

#19 Re : -1 »  [Résolu] Rediriger curl vers zenity --progress » Le 28/09/2014, à 12:19

Hizoka
Réponses : 11

salut,

peux tu donner un exemple precis de ton code (avec une adresse) pour tester ?

#20 Re : -1 »  [Résolu] Rediriger curl vers zenity --progress » Le 29/09/2014, à 10:56

Hizoka
Réponses : 11
# Valeur de base servant à comparer la progression
old_valeur="0"

# Boucle traitant chaque retour chariot
while read -d $'\r' ligne
do
 # Changement de la ligne en nombre entier, evite d'utiliser une ER
 valeur="${ligne##* }"
 valeur="${valeur%,*}"

 # Comparaison histoire de ne pas envoyer des infos inutiles à zenity, mais c'est facultatif
 if [[ ${valeur} != ${old_valeur} ]]
 then
  echo "${valeur}"
  old_valeur="${valeur}"
 fi
done < <(curl --progress-bar --anyauth --create-dirs -O http://hizo.fr/linux/wiithon_1.21-trunk-revision-493_i386.deb 2>&1) | zenity --progress

Plusieurs soucis je pense :
- Le retour est un nombre flottant or, ça ne marche pas avec zenity.
- curl affiche bien un retour tout seul, des infos avec un retour chariot (\r), qui ne renvoie plus rien si tu ajoutes ton grep.

De ce fait il faut passer par une boucle qui fonctionne avec les retours chariots : while read -d $'\r' ligne
et utiliser un nombre entier au lieu du nombre flottant : valeur="${ligne##* }" et valeur="${valeur%,*}"

Il est également possible de passer via un fichier comme tu le dis avec une boucle qui lit la derniere ligne du fichier et recupere la valeur comme ci dessus.

Et en version compressée :

while read -d $'\r' ligne; do valeur="${ligne##* }" ; echo "${valeur%,*}"; done < <(curl --progress-bar --anyauth --create-dirs -O http://hizo.fr/linux/wiithon_1.21-trunk-revision-493_i386.deb 2>&1) | zenity --progress

#21 Re : -1 »  [Résolu] Rediriger curl vers zenity --progress » Le 29/09/2014, à 13:48

Hizoka
Réponses : 11

parce que bash ne te va pas ?

#22 Re : -1 »  [Résolu] Rediriger curl vers zenity --progress » Le 29/09/2014, à 14:39

Hizoka
Réponses : 11

il manque plus qu'un petit [resolu] wink

#23 Re : -1 »  Changer la date de creation des photos » Le 04/09/2014, à 12:17

Hizoka
Réponses : 32

tu as utilisé quelle commande car la y en a plusieurs ?

jhead -ta-12:00 *.jpg
jhead -ta-12:00 *.JPG

#24 Re : -1 »  Changer la date de creation des photos » Le 04/09/2014, à 13:14

Hizoka
Réponses : 32

il renvoie une erreur ?
sinon :

for image in *.jpg
do
jhead -ta-12:00 "${image}"
done

for image in *.JPG
do
jhead -ta-12:00 "${image}"
done