Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Pour en savoir un peu plus sur l'équipe du forum.

Appel à contributeurs pour la doc.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

nombre réponses : 25

#0 -1 »  [Resolu] Périph USB marche sous Virtualbox mais pas dans système hôte » Le 27/11/2016, à 00:59

joe97
Réponses : 4

Bonjour

Je ne sais pas si je poste dans la bonne section ...

J'ai acheté un ... lecteur de disquette USB ( je voulais récupérer de très vieux fichiers )
Il n'est pas détecté comme tel par Ubuntu ( 12.04 Precise ) ( Il apparaît dans la liste des périphériques usb mais n'est pas fonctionnel )
C'est sans doute banal
Mais là où ça devient intéressant , c'est qu'il fonctionne parfaitement dans des systèmes virtualisés sous VirtualBox  ( Comme Ubuntu 14.04 Trusty ou même 09.10 Karmic ) de sorte que j'ai pu récupérer mes fichiers , mais il ne fonctionne pas dans le système hôte .
Ni le lecteur de disquette , ni l'ordinateur ne sont donc en cause ...

Jje suis quand même très surpris de ce comportement ... Ma question n'a rien d'urgent , simple curiosité intellectuelle .
Je suis preneur de toute explication ...

#1 Re : -1 »  [Resolu] Périph USB marche sous Virtualbox mais pas dans système hôte » Le 06/12/2016, à 21:46

joe97
Réponses : 4

En effet ça ne marche pas non plus dans 12.04 dans Virtualbox ...
Ça doit donc être lié a 12.04 ....

#2 Re : -1 »  [Resolu] Périph USB marche sous Virtualbox mais pas dans système hôte » Le 06/12/2016, à 22:51

joe97
Réponses : 4

Quant à dmesg il me renvoie ça :

[10592.134887] FAT-fs (sdb1): Directory bread(block 29901702) failed
[10592.134893] FAT-fs (sdb1): Directory bread(block 29901703) failed
[10592.134900] FAT-fs (sdb1): Directory bread(block 29901704) failed
[10592.134907] FAT-fs (sdb1): Directory bread(block 29901705) failed
[10592.134914] FAT-fs (sdb1): Directory bread(block 29901706) failed
[10592.134921] FAT-fs (sdb1): Directory bread(block 29901707) failed
[10592.134928] FAT-fs (sdb1): Directory bread(block 29901708) failed
[10592.134935] FAT-fs (sdb1): Directory bread(block 29901709) failed
[10592.134945] FAT-fs (sdb1): Directory bread(block 29901710) failed
[10592.134955] FAT-fs (sdb1): Directory bread(block 29901711) failed
[10592.135229] FAT-fs (sdb1): Directory bread(block 29917712) failed
[10592.135241] FAT-fs (sdb1): Directory bread(block 29917713) failed
[10592.135251] FAT-fs (sdb1): Directory bread(block 29917714) failed
[10592.135265] FAT-fs (sdb1): Directory bread(block 29917715) failed
[10592.135277] FAT-fs (sdb1): Directory bread(block 29917716) failed
[10592.135288] FAT-fs (sdb1): Directory bread(block 29917717) failed
[10592.135299] FAT-fs (sdb1): Directory bread(block 29917718) failed
[10592.135310] FAT-fs (sdb1): Directory bread(block 29917719) failed
[10592.135321] FAT-fs (sdb1): Directory bread(block 29917720) failed
[10592.135332] FAT-fs (sdb1): Directory bread(block 29917721) failed
[10592.135342] FAT-fs (sdb1): Directory bread(block 29917722) failed
[10592.135351] FAT-fs (sdb1): Directory bread(block 29917723) failed
[10592.135360] FAT-fs (sdb1): Directory bread(block 29917724) failed
[10592.135370] FAT-fs (sdb1): Directory bread(block 29917725) failed
[10592.135379] FAT-fs (sdb1): Directory bread(block 29917726) failed
[10592.135388] FAT-fs (sdb1): Directory bread(block 29917727) failed
[10592.135397] FAT-fs (sdb1): Directory bread(block 29917728) failed
[10592.135407] FAT-fs (sdb1): Directory bread(block 29917729) failed
[10592.135416] FAT-fs (sdb1): Directory bread(block 29917730) failed
[10592.135425] FAT-fs (sdb1): Directory bread(block 29917731) failed
[10592.135435] FAT-fs (sdb1): Directory bread(block 29917732) failed
[10592.135445] FAT-fs (sdb1): Directory bread(block 29917733) failed
[10592.135455] FAT-fs (sdb1): Directory bread(block 29917734) failed
[10592.135464] FAT-fs (sdb1): Directory bread(block 29917735) failed
[10592.135473] FAT-fs (sdb1): Directory bread(block 29917736) failed
[10592.135482] FAT-fs (sdb1): Directory bread(block 29917737) failed
[10592.135492] FAT-fs (sdb1): Directory bread(block 29917738) failed
[10592.135502] FAT-fs (sdb1): Directory bread(block 29917739) failed
[10592.135513] FAT-fs (sdb1): Directory bread(block 29917740) failed
[10592.135523] FAT-fs (sdb1): Directory bread(block 29917741) failed
[10592.135533] FAT-fs (sdb1): Directory bread(block 29917742) failed
[10592.135544] FAT-fs (sdb1): Directory bread(block 29917743) failed
[10592.135832] FAT-fs (sdb1): Directory bread(block 36072336) failed
[10592.135842] FAT-fs (sdb1): Directory bread(block 36072337) failed
[10592.135851] FAT-fs (sdb1): Directory bread(block 36072338) failed
[10592.135860] FAT-fs (sdb1): Directory bread(block 36072339) failed
[10592.135869] FAT-fs (sdb1): Directory bread(block 36072340) failed
[10592.135878] FAT-fs (sdb1): Directory bread(block 36072341) failed
[10592.135887] FAT-fs (sdb1): Directory bread(block 36072342) failed
[10592.135896] FAT-fs (sdb1): Directory bread(block 36072343) failed
[10592.135905] FAT-fs (sdb1): Directory bread(block 36072344) failed
[10592.135915] FAT-fs (sdb1): Directory bread(block 36072345) failed
[10592.135924] FAT-fs (sdb1): Directory bread(block 36072346) failed
[10592.135934] FAT-fs (sdb1): Directory bread(block 36072347) failed
[10592.135944] FAT-fs (sdb1): Directory bread(block 36072348) failed
[10592.135954] FAT-fs (sdb1): Directory bread(block 36072349) failed
[10592.135966] FAT-fs (sdb1): Directory bread(block 36072350) failed
[10592.135976] FAT-fs (sdb1): Directory bread(block 36072351) failed
[10592.135986] FAT-fs (sdb1): Directory bread(block 36072352) failed
[10592.135996] FAT-fs (sdb1): Directory bread(block 36072353) failed
[10592.136005] FAT-fs (sdb1): Directory bread(block 36072354) failed
[10592.136015] FAT-fs (sdb1): Directory bread(block 36072355) failed
[10592.136024] FAT-fs (sdb1): Directory bread(block 36072356) failed
[10592.136034] FAT-fs (sdb1): Directory bread(block 36072357) failed
[10592.136044] FAT-fs (sdb1): Directory bread(block 36072358) failed
[10592.136054] FAT-fs (sdb1): Directory bread(block 36072359) failed
[10592.136064] FAT-fs (sdb1): Directory bread(block 36072360) failed
[10592.136075] FAT-fs (sdb1): Directory bread(block 36072361) failed
[10592.136085] FAT-fs (sdb1): Directory bread(block 36072362) failed
[10592.136096] FAT-fs (sdb1): Directory bread(block 36072363) failed
[10592.136107] FAT-fs (sdb1): Directory bread(block 36072364) failed
[10592.136117] FAT-fs (sdb1): Directory bread(block 36072365) failed
[10592.136128] FAT-fs (sdb1): Directory bread(block 36072366) failed
[10592.136138] FAT-fs (sdb1): Directory bread(block 36072367) failed
[10592.140978] FAT-fs (sdb4): Directory bread(block 14717472) failed
[10592.140992] FAT-fs (sdb4): Directory bread(block 14717473) failed
[10592.141000] FAT-fs (sdb4): Directory bread(block 14717474) failed
[10592.141007] FAT-fs (sdb4): Directory bread(block 14717475) failed
[10592.141014] FAT-fs (sdb4): Directory bread(block 14717476) failed
[10592.141021] FAT-fs (sdb4): Directory bread(block 14717477) failed
[10592.141028] FAT-fs (sdb4): Directory bread(block 14717478) failed
[10592.141036] FAT-fs (sdb4): Directory bread(block 14717479) failed
[10592.141043] FAT-fs (sdb4): Directory bread(block 14717480) failed
[10592.141050] FAT-fs (sdb4): Directory bread(block 14717481) failed
[10592.141057] FAT-fs (sdb4): Directory bread(block 14717482) failed
[10592.141064] FAT-fs (sdb4): Directory bread(block 14717483) failed
[10592.141071] FAT-fs (sdb4): Directory bread(block 14717484) failed
[10592.141078] FAT-fs (sdb4): Directory bread(block 14717485) failed
[10592.141085] FAT-fs (sdb4): Directory bread(block 14717486) failed
[10592.141092] FAT-fs (sdb4): Directory bread(block 14717487) failed
[10592.148979] EXT2-fs (sdb3): previous I/O error to superblock detected
[10592.148982] 
[10592.157310] FAT-fs (sdb4): FAT read failed (blocknr 7204)
[10592.166485] FAT-fs (sdb1): Directory bread(block 16849808) failed
[10592.166498] FAT-fs (sdb1): Directory bread(block 16849809) failed
[10592.166502] FAT-fs (sdb1): Directory bread(block 16849810) failed
[10592.166506] FAT-fs (sdb1): Directory bread(block 16849811) failed
[10592.166509] FAT-fs (sdb1): Directory bread(block 16849812) failed
[10592.166512] FAT-fs (sdb1): Directory bread(block 16849813) failed
[10592.166515] FAT-fs (sdb1): Directory bread(block 16849814) failed
[10592.166518] FAT-fs (sdb1): Directory bread(block 16849815) failed
[10592.166522] FAT-fs (sdb1): Directory bread(block 16849816) failed
[10592.166525] FAT-fs (sdb1): Directory bread(block 16849817) failed
[10592.166529] FAT-fs (sdb1): Directory bread(block 16849818) failed
[10592.166532] FAT-fs (sdb1): Directory bread(block 16849819) failed
[10592.166535] FAT-fs (sdb1): Directory bread(block 16849820) failed
[10592.166539] FAT-fs (sdb1): Directory bread(block 16849821) failed
[10592.166542] FAT-fs (sdb1): Directory bread(block 16849822) failed
[10592.166545] FAT-fs (sdb1): Directory bread(block 16849823) failed
[10592.166549] FAT-fs (sdb1): Directory bread(block 16849824) failed
[10592.166552] FAT-fs (sdb1): Directory bread(block 16849825) failed
[10592.166555] FAT-fs (sdb1): Directory bread(block 16849826) failed
[10592.166558] FAT-fs (sdb1): Directory bread(block 16849827) failed
[10592.166561] FAT-fs (sdb1): Directory bread(block 16849828) failed
[10592.166564] FAT-fs (sdb1): Directory bread(block 16849829) failed
[10592.166567] FAT-fs (sdb1): Directory bread(block 16849830) failed
[10592.166570] FAT-fs (sdb1): Directory bread(block 16849831) failed
[10592.166574] FAT-fs (sdb1): Directory bread(block 16849832) failed
[10592.166576] FAT-fs (sdb1): Directory bread(block 16849833) failed
[10592.166580] FAT-fs (sdb1): Directory bread(block 16849834) failed
[10592.166583] FAT-fs (sdb1): Directory bread(block 16849835) failed
[10592.166586] FAT-fs (sdb1): Directory bread(block 16849836) failed
[10592.166592] FAT-fs (sdb1): Directory bread(block 16849837) failed
[10592.166595] FAT-fs (sdb1): Directory bread(block 16849838) failed
[10592.166598] FAT-fs (sdb1): Directory bread(block 16849839) failed
[10592.166661] FAT-fs (sdb1): FAT read failed (blocknr 4537)
[10592.181162] EXT2-fs (sdb3): previous I/O error to superblock detected
[10592.181164] 
[10592.181191] EXT2-fs (sdb3): previous I/O error to superblock detected
[10592.181192] 
[10592.183924] EXT2-fs (sdb3): previous I/O error to superblock detected
[10592.183928] 
[10592.183968] EXT2-fs (sdb3): previous I/O error to superblock detected
[10592.183969] 
[10592.474634] FAT-fs (sdb1): FAT read failed (blocknr 4139)
[10592.474670] quiet_error: 42 callbacks suppressed
[10592.474673] Buffer I/O error on device sdb1, logical block 16849776
[10592.474675] lost page write due to I/O error on sdb1
[10592.474683] Buffer I/O error on device sdb1, logical block 65046097
[10592.474684] lost page write due to I/O error on sdb1
[10592.474687] Buffer I/O error on device sdb1, logical block 65046098
[10592.474689] lost page write due to I/O error on sdb1
[10592.474725] FAT-fs (sdb1): bread failed in fat_clusters_flush
[10698.610115] usb 2-1.3: reset high-speed USB device number 10 using ehci_hcd
[10698.703831] scsi21 : usb-storage 2-1.3:1.0
[10699.737020] scsi 21:0:0:0: Direct-Access     SAMSUNG  MP0804H          YS20 PQ: 0 ANSI: 0
[10699.738058] sd 21:0:0:0: Attached scsi generic sg2 type 0
[10699.739482] sd 21:0:0:0: [sdb] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
[10699.740224] sd 21:0:0:0: [sdb] Write Protect is off
[10699.740226] sd 21:0:0:0: [sdb] Mode Sense: 03 00 00 00
[10699.741104] sd 21:0:0:0: [sdb] No Caching mode page found
[10699.741107] sd 21:0:0:0: [sdb] Assuming drive cache: write through
[10699.744604] sd 21:0:0:0: [sdb] No Caching mode page found
[10699.744607] sd 21:0:0:0: [sdb] Assuming drive cache: write through
[10700.222210]  sdb: sdb1 sdb2 sdb3 sdb4
[10700.226023] sd 21:0:0:0: [sdb] No Caching mode page found
[10700.226027] sd 21:0:0:0: [sdb] Assuming drive cache: write through
[10700.226030] sd 21:0:0:0: [sdb] Attached SCSI disk
[10701.268549] EXT2-fs (sdb3): warning: mounting unchecked fs, running e2fsck is recommended
[10714.218488] usb 2-1.3: USB disconnect, device number 10
[10720.785897] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd
[10720.910039] scsi22 : usb-storage 2-1.3:1.0
[10722.025900] scsi 22:0:0:0: Direct-Access     Y-E DATA USB-FDU          7.03 PQ: 0 ANSI: 0 CCS
[10722.026974] sd 22:0:0:0: Attached scsi generic sg2 type 0
[10722.217738] sd 22:0:0:0: [sdb] 2880 512-byte logical blocks: (1.47 MB/1.40 MiB)
[10722.233763] sd 22:0:0:0: [sdb] Write Protect is off
[10722.233772] sd 22:0:0:0: [sdb] Mode Sense: 00 46 94 00
[10722.249757] sd 22:0:0:0: [sdb] No Caching mode page found
[10722.249765] sd 22:0:0:0: [sdb] Assuming drive cache: write through
[10722.361701] sd 22:0:0:0: [sdb] No Caching mode page found
[10722.361705] sd 22:0:0:0: [sdb] Assuming drive cache: write through
[10722.649604]  sdb:
[10722.761497] sd 22:0:0:0: [sdb] No Caching mode page found
[10722.761504] sd 22:0:0:0: [sdb] Assuming drive cache: write through
[10722.761510] sd 22:0:0:0: [sdb] Attached SCSI removable disk
[10815.729383] usb 2-1.3: reset full-speed USB device number 11 using ehci_hcd
[10815.834908] scsi23 : usb-storage 2-1.3:1.0
[10816.918565] scsi 23:0:0:0: Direct-Access     Y-E DATA USB-FDU          7.03 PQ: 0 ANSI: 0 CCS
[10816.920180] sd 23:0:0:0: Attached scsi generic sg2 type 0
[10817.270325] sd 23:0:0:0: [sdb] 2880 512-byte logical blocks: (1.47 MB/1.40 MiB)
[10817.286309] sd 23:0:0:0: [sdb] Write Protect is off
[10817.286317] sd 23:0:0:0: [sdb] Mode Sense: 00 46 94 00
[10817.302257] sd 23:0:0:0: [sdb] No Caching mode page found
[10817.302263] sd 23:0:0:0: [sdb] Assuming drive cache: write through
[10817.414256] sd 23:0:0:0: [sdb] No Caching mode page found
[10817.414264] sd 23:0:0:0: [sdb] Assuming drive cache: write through
[10817.702069]  sdb:
[10817.814071] sd 23:0:0:0: [sdb] No Caching mode page found
[10817.814077] sd 23:0:0:0: [sdb] Assuming drive cache: write through
[10817.814082] sd 23:0:0:0: [sdb] Attached SCSI removable disk
[12444.753722] PM: Syncing filesystems ... done.
[12444.756650] PM: Preparing system for mem sleep
[12444.756677] Freezing user space processes ... (elapsed 0.01 seconds) done.
[12444.773474] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[12444.789462] PM: Entering mem sleep
[12444.789568] Suspending console(s) (use no_console_suspend to debug)
[12444.790123] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12444.806059] sdhci-pci 0000:03:00.1: PCI INT B disabled
[12444.809502] ACPI handle has no context!
[12444.837411] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[12444.876480] e1000e 0000:00:19.0: PME# enabled
[12444.876488] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[12444.897382] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[12444.914724] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[12444.929278] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.886 msecs
[12445.009899] sd 0:0:0:0: [sda] Stopping disk
[12445.036893] PM: suspend of drv:nvidia dev:0000:01:00.0 complete after 231.986 msecs
[12445.249196] snd_hda_intel 0000:01:00.1: PCI INT A disabled
[12445.249265] ACPI handle has no context!
[12445.265155] PM: suspend of drv:snd_hda_intel dev:0000:01:00.1 complete after 460.411 msecs
[12445.265233] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 455.782 msecs
[12446.009262] PM: suspend of drv:sd dev:0:0:0:0 complete after 1219.813 msecs
[12446.009328] PM: suspend of drv:scsi dev:target0:0:0 complete after 1219.828 msecs
[12446.009397] PM: suspend of drv:scsi dev:host0 complete after 1205.186 msecs
[12446.024741] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 1220.066 msecs
[12446.024803] PM: suspend of drv: dev:pci0000:00 complete after 1215.688 msecs
[12446.024822] PM: suspend of devices complete after 1235.780 msecs
[12446.024826] PM: suspend devices took 1.236 seconds
[12446.025306] ehci_hcd 0000:00:1d.0: PME# enabled
[12446.025313] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[12446.040781] ehci_hcd 0000:00:1a.0: PME# enabled
[12446.040792] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[12446.056779] PM: late suspend of devices complete after 31.967 msecs
[12446.056924] ACPI: Preparing to enter system sleep state S3
[12446.080911] PM: Saving platform NVS memory
[12446.082317] Disabling non-boot CPUs ...
[12446.184616] CPU 1 is now offline
[12446.288597] CPU 2 is now offline
[12446.392546] CPU 3 is now offline
[12446.393060] Extended CMOS year: 2000
[12446.393283] ACPI: Low-level resume complete
[12446.393343] PM: Restoring platform NVS memory
[12446.393876] CPU0: Thermal monitoring handled by SMI
[12446.393935] Extended CMOS year: 2000
[12446.393987] Enabling non-boot CPUs ...
[12446.394120] Booting Node 0 Processor 1 APIC 0x4
[12446.394121] smpboot cpu 1: start_ip = 91000
[12446.405148] Calibrating delay loop (skipped) already calibrated this CPU
[12446.405171] CPU1: Thermal monitoring handled by SMI
[12446.425521] NMI watchdog enabled, takes one hw-pmu counter.
[12446.425792] CPU1 is up
[12446.425860] Booting Node 0 Processor 2 APIC 0x1
[12446.425861] smpboot cpu 2: start_ip = 91000
[12446.436888] Calibrating delay loop (skipped) already calibrated this CPU
[12446.436912] CPU2: Thermal monitoring handled by SMI
[12446.457298] NMI watchdog enabled, takes one hw-pmu counter.
[12446.457591] CPU2 is up
[12446.457667] Booting Node 0 Processor 3 APIC 0x5
[12446.457669] smpboot cpu 3: start_ip = 91000
[12446.468694] Calibrating delay loop (skipped) already calibrated this CPU
[12446.468717] CPU3: Thermal monitoring handled by SMI
[12446.489236] NMI watchdog enabled, takes one hw-pmu counter.
[12446.489562] CPU3 is up
[12446.492160] ACPI: Waking up from system sleep state S3
[12446.569526] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[12446.569555] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[12446.569577] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[12446.569609] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[12446.569627] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xe8270000)
[12446.569634] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[12446.569653] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[12446.569658] ehci_hcd 0000:00:1a.0: PME# disabled
[12446.569675] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[12446.569692] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8260004)
[12446.569697] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[12446.569703] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[12446.569735] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[12446.569746] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xe861e851)
[12446.569757] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[12446.569762] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[12446.569800] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[12446.569810] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0xeff1ec01)
[12446.569821] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[12446.569828] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[12446.569864] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[12446.569875] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0xe841e831)
[12446.569880] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20004040, writing 0x4040)
[12446.569889] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[12446.569894] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[12446.569928] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[12446.569945] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xe8250000)
[12446.569952] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[12446.569969] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[12446.569973] ehci_hcd 0000:00:1d.0: PME# disabled
[12446.570073] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[12446.570124] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800003)
[12446.570159] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[12446.570190] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xe3000000, writing 0x0)
[12446.570198] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800010, writing 0x800000)
[12446.570239] snd_hda_intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[12446.570327] yenta_cardbus 0000:03:00.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010b)
[12446.570333] yenta_cardbus 0000:03:00.0: restoring config space at offset 0xe (was 0x0, writing 0x20fc)
[12446.570339] yenta_cardbus 0000:03:00.0: restoring config space at offset 0xd (was 0x0, writing 0x2000)
[12446.570345] yenta_cardbus 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[12446.570351] yenta_cardbus 0000:03:00.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[12446.570357] yenta_cardbus 0000:03:00.0: restoring config space at offset 0xa (was 0x0, writing 0xe37ff000)
[12446.570363] yenta_cardbus 0000:03:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xe3400000)
[12446.570369] yenta_cardbus 0000:03:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xeffff000)
[12446.570375] yenta_cardbus 0000:03:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xec000000)
[12446.570381] yenta_cardbus 0000:03:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0070403)
[12446.570390] yenta_cardbus 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe5940000)
[12446.570400] yenta_cardbus 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[12446.570440] yenta_cardbus 0000:03:00.0: setting latency timer to 64
[12446.570469] sdhci-pci 0000:03:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[12446.570495] sdhci-pci 0000:03:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xe5930000)
[12446.570501] sdhci-pci 0000:03:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[12446.570509] sdhci-pci 0000:03:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[12446.570557] firewire_ohci 0000:03:00.4: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[12446.570585] firewire_ohci 0000:03:00.4: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[12446.570593] firewire_ohci 0000:03:00.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[12446.570978] PM: early resume of devices complete after 1.538 msecs
[12446.571124] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[12446.571130] e1000e 0000:00:19.0: PME# disabled
[12446.571135] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[12446.571139] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[12446.571156] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[12446.571161] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[12446.571175] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[12446.571204] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[12446.571210] pci 0000:00:1e.0: setting latency timer to 64
[12446.571241] ahci 0000:00:1f.2: setting latency timer to 64
[12446.571300] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[12446.571347] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[12446.571350] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[12446.571367] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[12446.571377] sdhci-pci 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[12446.571789] sd 0:0:0:0: [sda] Starting disk
[12446.625486] firewire_core: skipped bus generations, destroying all nodes
[12446.749226] PM: resume of drv:hub dev:1-1:1.0 complete after 177.464 msecs
[12446.749229] PM: resume of drv: dev:ep_00 complete after 177.223 msecs
[12446.749235] PM: resume of drv: dev:ep_00 complete after 177.468 msecs
[12446.749249] PM: resume of drv:hub dev:2-1:1.0 complete after 177.417 msecs
[12446.749256] PM: resume of drv: dev:ep_81 complete after 177.492 msecs
[12446.749267] PM: resume of drv: dev:ep_81 complete after 177.318 msecs
[12446.776273] PM: resume of drv:battery dev:PNP0C0A:00 complete after 192.811 msecs
[12446.797533] PM: resume of drv:usb dev:2-1.8:0.0 complete after 225.384 msecs
[12446.797536] PM: resume of drv:usb dev:2-1.8:0.1 complete after 225.327 msecs
[12446.797547] PM: resume of drv: dev:ep_81 complete after 225.384 msecs
[12446.797551] PM: resume of drv: dev:ep_00 complete after 225.284 msecs
[12446.797554] PM: resume of drv: dev:ep_85 complete after 225.361 msecs
[12446.797558] PM: resume of drv: dev:ep_82 complete after 225.336 msecs
[12446.797567] PM: resume of drv: dev:ep_02 complete after 225.331 msecs
[12446.797570] PM: resume of drv: dev:ep_01 complete after 225.390 msecs
[12446.797582] PM: resume of drv: dev:ep_86 complete after 225.330 msecs
[12446.821174] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[12446.826203] Extended CMOS year: 2000
[12446.889155] ata6: SATA link down (SStatus 0 SControl 300)
[12446.890980] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 319.925 msecs
[12446.897166] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[12446.899204] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[12446.903447] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[12446.903811] ata1.00: configured for UDMA/133
[12446.905114] ata4: SATA link down (SStatus 0 SControl 300)
[12446.913150] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[12446.916975] ata2.00: configured for UDMA/100
[12446.921127] ata5: SATA link down (SStatus 0 SControl 300)
[12446.924743] PM: resume of drv: dev:ep_00 complete after 352.754 msecs
[12446.924753] PM: resume of drv:uvcvideo dev:1-1.4:1.0 complete after 352.801 msecs
[12446.924765] PM: resume of drv:uvcvideo dev:1-1.4:1.1 complete after 352.771 msecs
[12446.924770] PM: resume of drv: dev:ep_81 complete after 352.813 msecs
[12446.945330] PM: resume of drv:sd dev:0:0:0:0 complete after 373.746 msecs
[12446.945366] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 373.734 msecs
[12446.945378] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 119.212 msecs
[12447.073042] sdhci-pci 0000:03:00.1: setting latency timer to 64
[12447.073078] PM: resume of drv:sdhci-pci dev:0000:03:00.1 complete after 501.984 msecs
[12447.125038] firewire_core: rediscovered device fw0
[12447.176989] usb 2-1.1: reset low-speed USB device number 3 using ehci_hcd
[12447.462002] PM: resume of drv:usbhid dev:2-1.1:1.0 complete after 890.278 msecs
[12447.462011] PM: resume of drv: dev:ep_00 complete after 890.248 msecs
[12447.462026] PM: resume of drv: dev:ep_81 complete after 890.287 msecs
[12447.462036] PM: resume of drv:generic-usb dev:0003:0A81:0203.0001 complete after 389.069 msecs
[12447.528747] usb 2-1.3: reset full-speed USB device number 11 using ehci_hcd
[12447.634556] PM: resume of drv: dev:ep_00 complete after 1062.658 msecs
[12447.634565] PM: resume of drv:usb-storage dev:2-1.3:1.0 complete after 1062.720 msecs
[12447.634586] PM: resume of drv: dev:ep_02 complete after 1062.720 msecs
[12447.634593] PM: resume of drv: dev:ep_81 complete after 1062.738 msecs
[12447.634599] PM: resume of drv: dev:ep_83 complete after 1062.718 msecs
[12447.634621] PM: resume of drv:scsi dev:host23 complete after 1062.710 msecs
[12447.634633] PM: resume of drv:scsi_host dev:host23 complete after 1062.707 msecs
[12447.634637] PM: resume of drv:scsi dev:target23:0:0 complete after 1062.693 msecs
[12447.634649] PM: resume of drv:sd dev:23:0:0:0 complete after 1062.668 msecs
[12447.634680] PM: resume of drv:scsi_device dev:23:0:0:0 complete after 1062.660 msecs
[12447.634694] PM: resume of devices complete after 1064.192 msecs
[12447.634818] PM: resume devices took 1.064 seconds
[12447.634855] PM: Finishing wakeup.
[12447.634856] Restarting tasks ... done.
[12447.636565] video LNXVIDEO:00: Restoring backlight state
[12448.362783] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[12448.416381] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[12448.417099] ADDRCONF(NETDEV_UP): eth0: link is not ready
[12449.005444] sd 23:0:0:0: [sdb] No Caching mode page found
[12449.005449] sd 23:0:0:0: [sdb] Assuming drive cache: write through
[12449.069387] sd 23:0:0:0: [sdb] No Caching mode page found
[12449.069392] sd 23:0:0:0: [sdb] Assuming drive cache: write through
[12449.373255]  sdb:
[12450.985263] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[12450.985272] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[12450.986547] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[12461.992732] eth0: no IPv6 routers present
[12769.467919] usb 2-1.3: USB disconnect, device number 11
[12908.598131] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd
[12908.670047] usb 2-1.3: device descriptor read/64, error -32
[12908.845949] usb 2-1.3: device descriptor read/64, error -32
[12909.021853] usb 2-1.3: new full-speed USB device number 13 using ehci_hcd
[12909.093812] usb 2-1.3: device descriptor read/64, error -32
[12909.269716] usb 2-1.3: device descriptor read/64, error -32
[12909.445619] usb 2-1.3: new full-speed USB device number 14 using ehci_hcd
[12909.853394] usb 2-1.3: device not accepting address 14, error -32
[12909.925353] usb 2-1.3: new full-speed USB device number 15 using ehci_hcd
[12910.333128] usb 2-1.3: device not accepting address 15, error -32
[12910.333305] hub 2-1:1.0: unable to enumerate USB device on port 3
[13014.523570] usb 2-1.3: new full-speed USB device number 16 using ehci_hcd
[13014.648378] scsi24 : usb-storage 2-1.3:1.0
[13015.765680] scsi 24:0:0:0: Direct-Access     Y-E DATA USB-FDU          7.03 PQ: 0 ANSI: 0 CCS
[13015.767661] sd 24:0:0:0: Attached scsi generic sg2 type 0
[13015.989563] sd 24:0:0:0: [sdb] 2880 512-byte logical blocks: (1.47 MB/1.40 MiB)
[13016.005483] sd 24:0:0:0: [sdb] Write Protect is off
[13016.005491] sd 24:0:0:0: [sdb] Mode Sense: 00 46 94 00
[13016.021529] sd 24:0:0:0: [sdb] No Caching mode page found
[13016.021535] sd 24:0:0:0: [sdb] Assuming drive cache: write through
[13016.133434] sd 24:0:0:0: [sdb] No Caching mode page found
[13016.133443] sd 24:0:0:0: [sdb] Assuming drive cache: write through
[13016.421349]  sdb:
[13016.533276] sd 24:0:0:0: [sdb] No Caching mode page found
[13016.533282] sd 24:0:0:0: [sdb] Assuming drive cache: write through
[13016.533286] sd 24:0:0:0: [sdb] Attached SCSI removable disk

... et je n'y comprends pas grand chose

#3 Re : -1 »  [Resolu] Périph USB marche sous Virtualbox mais pas dans système hôte » Le 31/12/2016, à 19:57

joe97
Réponses : 4

Après plusieurs tests , il apparaît clairement que le problème est lié à la version d'Ubuntu ( 12.04 )
Le lecteur est reconnu par d'autres versions ( 14.04 notamment , mais aussi de plus anciennes ) et ça ne dépend pas du fait que ces systèmes tournent "en direct" ou dans VirtualBox.
Je passe donc le sujet en "Résolu" .
Il subsiste bien un problème mais comme 12.04 n'est bientôt plus soutenu , la meilleure solution est simplement de passer aux versions suivantes

#4 Re : -1 »  Connection en tant que root » Le 04/04/2016, à 18:27

joe97
Réponses : 1

Bonjour

Le compte root est désactivé par défaut dans ubuntu .
Il est toutefois possible de le réactiver : ( Ce que j'avais fait pour pouvoir installer un programme récalcitrant )

sudo passwd root

Mais on ne conseille pas trop cette possibilité , il existe d'autres façons de faire .
N'étant pas spécialiste , je préfère donner ce lien où on en discute ( Il doit y en avoir beaucoup d'autres )
https://forum.ubuntu-fr.org/viewtopic.php?id=151

Bonne soirée

Joel

#5 -1 »  Plantages multiples » Le 30/03/2016, à 13:20

joe97
Réponses : 5

Bonjour à tous - Et à toutes !

Depuis quelques jours mon ordinateur est sujet à des problèmes  plantages à priori divers :
- Problèmes de carte son : Les paroles sont parfois "hachées "
- Plantages lors de l'utilisation de Firefox notamment : La fenêtre se fige , la consommation mémoire est excessive ( Je dispose de 8 Go plus un swap équivalent qui en général n'est jamais utilisé , mais là , sature rapidement ) et si je ne réagis pas vite , je n'ai plus de contrôle sur rien ( souris , clavier ) et dois procéder à un redémarrage "sauvage "
- Écran noir au démarrage parfois : Le système se charge , j'ai accès aux consoles non graphiques ( tty1 à 6 ) mais pas à tty 7 ( bureau habituel )

J'utilise 12.04 - donc une version très stable - sur un Dell Précision M4500 ( Depuis presque 4 ans )
Ce n'est pas à priori consécutif à une mise à jour .
Tout ça fait un peu désordre .
J'ai d'abord pensé à un problème de plugin ( Flash ? ) .Ou à un problème lié à Firefox ( Qui surconsomme de lma mémoire ) ,mais ça n'explique pas l'écran noir à certains démarrages.
Mon ordinateur a 6 ans ... Peut-être un problème matériel ?

Bref , je ne sais vraiment pas quoi en penser et je n'ai rien trouvé sur le forum.

Vos idées et conseils sont les bienvenus !

Merci par avance

Joel

#6 Re : -1 »  Plantages multiples » Le 30/03/2016, à 20:17

joe97
Réponses : 5

Tout d'abord merci beaucoup pour les réponses .
Je vais faire les tests que vous suggérez et lire la doc indiquée ( ça va peut-être me prendre du temps )
Quelques éléments tout de même :
- J'avais surveillé le comportement de Firefox avec le moniteur système . Firefox consomme beaucoup de ressources en général , et quand le problème survient ça s'emballe assez vite , de sorte que je n'ai pas forcément le temps d'intervenir ( plus de souris ).
- Après avoir installé Flashblock , je n'ai plus - pour le moment - de problèmes . Ce pourquoi je suspecte flash . Mais il reste des problèmes de son parfois . Et je ne vois pas le lien avec l'écran noir au démarrage .
Dès que j'ai quelque chose de concret , je le poste.
Encore merci

#7 Re : -1 »  Plantages multiples » Le 31/03/2016, à 17:09

joe97
Réponses : 5

J'envoie ce que me dit smartctl .
Je ne sais pas si c'est la bonne requête et je ne sais pas trop l'interpréter

Joel@joel-Precision-M4500:~$ sudo smartctl -A /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-101-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   099   006    Pre-fail  Always       -       85440833
  3 Spin_Up_Time            0x0003   100   099   085    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   095   095   020    Old_age   Always       -       5399
  5 Reallocated_Sector_Ct   0x0033   099   099   036    Pre-fail  Always       -       33
  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       4361694311
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5611
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   095   037   020    Old_age   Always       -       5223
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       8590065673
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   056   045    Old_age   Always       -       39 (Min/Max 26/39)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       25
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       52
193 Load_Cycle_Count        0x0032   068   068   000    Old_age   Always       -       65805
194 Temperature_Celsius     0x0022   039   044   000    Old_age   Always       -       39 (0 15 0 0)
195 Hardware_ECC_Recovered  0x001a   044   040   000    Old_age   Always       -       85440833
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       62418759718358
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1119161549
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3828387807
254 Free_Fall_Sensor        0x0032   001   001   000    Old_age   Always       -       2

memtest n'a rien trouvé

Par ailleurs je continue à tester la consommation mémoire avec le moniteur système lorsque je visionne des vidéos , mais les pannes arrivent de façon aléatoire , il n'y en a pas en ce moment ...

#8 -1 »  L'écran devient gris et plantage total sans raison visible » Le 26/02/2015, à 21:34

joe97
Réponses : 7

Bonjour

Il vient de m'arriver une chose que je n'avais plus rencontrée depuis que j'ai quitté Windows pour Linux soit depuis 7 ans environ ...
Alors que j'utilise Firefox et que je clique sur un lien , l'écran devient subitement uniformément gris ( pas bleu , donc mais c'est pas mieux )
Plus rien ne fonctionne , impossible de passer en mode console ( Ctrl Alt F1 .. 6 inopérant ) . Je n'ai pas essayé les touches accès système ( Alt Syst ... ) parce que je ne me souvenais plus précisément de l'effet de chacune et que je n'avais aucun document important ouvert , j'ai donc forcé l'arrêt , puis redémarré l'ordinateur . Et là j'ai eu la surprise de retrouver le système dans l'état où il s'était arrêté ,la page internet que je consultais etc ...

Je ne sollicite bien sûr pas d'aide puisque tout est rentré dans l'ordre , mais étant d'un naturel curieux , j'apprécierais si quelqu'un de plus initié que moi pouvait me suggérer une explication .
Je précise que je suis sur une version stable ( 12.04 ) d'ubuntu  , que les mises à jour sont régulièrement faites et que seuls Firefox et Thunderbird étaient en fonction à ce moment
Bonne soirée à tous
Joel

#9 Re : -1 »  L'écran devient gris et plantage total sans raison visible » Le 27/02/2015, à 22:04

joe97
Réponses : 7
manukatche a écrit :

waouh  cela me parait techniquement impossible... et ce quelque soit l'OS

Techniquement impossible ( Pourquoi ? ) ou pas , c'est bien ce qui s'est produit , j'en ai été le premier surpris .
@ Bougron : L'hypothèse de la mise en hibernation qui aurait été déclenchée au moment du plantage ou par une combinaison de touches de type Ctrl Alt Suppr  effectuée avant l'arrêt forcé est une piste à priori même si j'ai du mal à y croire .

#10 Re : -1 »  L'écran devient gris et plantage total sans raison visible » Le 28/02/2015, à 20:55

joe97
Réponses : 7

Bonsoir
@Bougron : Lorsque le plantage est arrivé , je faisais des achats sur un site .Sur ce site , très sérieux par ailleurs , quand on clique sur " Mettre dans le panier " , l'icône représentant l'objet  acheté fait un saut gracieux pour aller dans le panier , et je suspecte un problème de support défectueux de la technologie qui permet ce gadget graphique . Toutefois lors des achats ultérieurs , rien d'ennuyeux ne s'est passé . Je pense qu'en effet il y a eu un problème au niveau de la carte graphique ou des logiciels qui gèrent l'affichage , un processus étant peut-être "en boucle"
Donc , j'ai recommencé l'action et ça n'a pas donné le même résultat .

@Bipede78 : Ctrl Alt Suppr est un raccourci qui affiche un écran permettant de se déconnecter sur 12.04 ( Mais il faut confirmer la déconnexion  )

Par ailleurs , si on arrête l'ordinateur ( de quelque façon que ce soit ) alors que Firefox n'est pas arrêté , il essaie systématiquement au redémarrage qui suit de se reconnecter aux sites qui étaient utilisés au moment de l'arrêt , cela peut peut-être expliquer qu'au redémarrage je me sois retrouvé sur l'écran que je venais de quitter ( Mais il est difficile de voir comment Firefox a pu se lancer automatiquement sauf à considérer qu'il y a eu mise en hibernation ( mais comment ? ) )
( Peut-être le plantage en utilisant trop de mémoire a-t-il forcé l'écriture en "swap" de l'état du système ? Bon , là , je dis un peu n'importe quoi au hasard ! )

J'ai fait quelques essais en arrêtant "sauvagement" l'ordinateur après avoir tapé des séquences de touches identiques à celles que j'avais tenté au moment du plantage , mais au redémarrage je n'ai  retrouvé  que l'écran d'accueil ...

Mystère donc , mais en tous cas certains disent qu'on peut toujours reprendre la main sous Linux , ça ne semble plus vrai avec les configurations actuelles ...

#11 -1 »  [Résolu] Plein écran impossible pour certains systèmes invités seult » Le 07/07/2014, à 19:24

joe97
Réponses : 2

Bonjour

J'utilise Virtualbox ( Version 4.1.12 , je suis sous Ubuntu 12.04 ) et je souhaitais virtualiser ubuntu 14.04 ( Pour voir si les nouveautés justifient que je change de version et pour faire quelques tests ) . Mais il m'est impossible de passer en mode plein écran ( Et je n'ai qu'un tout petit écran , inutilisable ) , alors que ça se passe sans problème pour des versions de Linux plus anciennes . ( Ainsi que pour d'autres OS comme Win XP ou Haiku )
Je me demande donc ce qui justifie ce changement d'attitude de VB , et surtout ce que je peux faire ...
Merci d'avance pour toute suggestion
Joel

PS J'ai eu le même problème en voulant virtualiser d'autres versions récentes de Linux ( Comme Voyager , basé sur Ubuntu )

#12 Re : -1 »  [Résolu] Plein écran impossible pour certains systèmes invités seult » Le 07/07/2014, à 19:33

joe97
Réponses : 2

Oui , je l'ai fait et ça semble s'être passé sans problèmes , mais ça ne marche pas ...

En fait , j'ai suivi la même démarche que lorsque j'ai virtualisé par exemple Karmic
Ce qui fonctionnait avec ces versions assez anciennes ne marche plus avec des versions plus récentes , voilà mon problème

Edit :
Il y a un message d'erreur qui apparaît fugacement au démarrage ( sur écran noir , avant l'écran de log in ) :

[   14.795197] piix4_smbus 0000:00:07.0 : SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr

Je ne sais pas s'il y a un lien


Edit 2
En effet l'installation ne s'est pas faite . Je viens de m'en rendre compte en tentant une réinstallation .
J'ai :

The headers for the current running kernel were not found 
( ... )
Building the main Guest Additions module ...fail!
( Look at /var/log/vboxadd-install.log to find out what went wrong )

J'ai donc l'explication , mais je ne sais pas trop ce qu'il faut faire .
Une recherche sur internet m'a permis de voir qu'il y a de nombreuses situations similaires , mais aucune des démarches proposées ( Je les ai peut-être mal comprises , certaines sont en anglais ) ne m'a permis de remédier au problème
Merci pour vos explications sur la démarche à suivre !!


Edit 3
Je viens de trouver la solution ici :
http://ubuntuforums.org/showthread.php?t=2198058
Un élément semblait manquant dans les additions invité
Après avoir effectué

sudo apt-get install virtualbox-guest-dkms

et accepté la version du responsable du paquet , ( et rebooté bien sûr ) , tout marche ! ( Assez lentement , mais c'est un autre problème qui semble indépendant , la lenteur était déjà présente auparavant , je m'arrête ici aujourd'hui ! )

#13 Re : -1 »  12.04 Problème: Ouvrir avec » Le 15/12/2013, à 00:53

joe97
Réponses : 1

Bonsoir
A priori la méthode la plus simple pour associer un programme à un type de fichier est de le définir directement dans l'onglet Propriétés ( Clic droit sur le fichier ) .
C'est d'ailleurs ce qu'indique la page internet où mène le lien cité , même si son auteur privilégie le mode ligne de commande ( Cette page date de 2009 )
Si le programme n'est pas disponible dans la liste proposée , il y a peut-être un autre problème ?
Bonne soirée
Joel

#14 Re : -1 »  création d'un formulaire avec libreoffice writer » Le 05/12/2013, à 23:16

joe97
Réponses : 1

Bonsoir

Je n'ai pas de réponse directe à proposer , mais peut-être que tu devrais poser ta question sur le forum OpenOffice - libreoffice  :
https://forum.openoffice.org/fr/forum/

Joel

#15 Re : -1 »  Premier freeze d'ubuntu et même de Linux... » Le 14/05/2013, à 10:25

joe97
Réponses : 11

Bonjour
Juste un mot pour dire que cela m'est aussi arrivé plusieurs fois sous 12.04 ( Precise )
Mais ça ne le fait qu'avec certains noyaux Linux ( 3.2.0-40 ... ) et pas avec tous les ordinateurs
Même si le clavier semble ne plus fonctionner , que  Ctrl Alt F1 par exemple n'a plus d'effet , je peux encore faire des appels noyau , par exemple redémarrer avec Alt  Syst  b   .
Dans un des cas , cela correspondait à un bug identifié ( https://bugs.launchpad.net/ubuntu/+sour … ug/1167669 )
Dans d'autres cas , je n'ai pas d'explication ...

#16 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 04/05/2013, à 23:17

joe97
Réponses : 16

J'ai constaté en parcourant le forum ( et surtout les questions sans réponses , hélas ) qu'il y a plusieurs situations similaires ( pas identiques , mais avec en commun un "freeze" ou tout du moins l'impossibilité d'intervenir car le clavier n'est plus reconnu )
Dommage que les posteurs n'indiquent en général pas quel est leur matériel , ni même parfois la version d'ubuntu , il y a peut-être un problème avec certains types de matériels ( ?? )

J'arrive à faire fonctionner l'ordinateur avec une version antérieure de Precise ( En live-usb )
Mon problème doit donc bien être lié à la mise à jour effectuée
( ou alors c'est un problème de disque dur ? Possible car il fait parfois du bruit mais je n'y crois pas )

Comment peut-on faire pour essayer de savoir si le problème est matériel ou vient du logiciel ?
Si vous avez une idée ...

#17 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 05/05/2013, à 10:56

joe97
Réponses : 16

Merci pour la réponse

J'obtiens :
00:02.0 VGA Compatible Controller [0300] : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
[ 8086 : 0102 ] ( Rev 09 ) ( prog-if00 [VGA Controller ] )

( J'ai du recopier le résultat , j'espère ne pas avoir fait de fautes de frappe )

#18 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 05/05/2013, à 12:23

joe97
Réponses : 16
cat /var/log/kern.log | grep "ata"

renvoie plusieurs pages :

May  1 19:40:33 joel-System-Product-Name kernel: [    1.335849] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:40:33 joel-System-Product-Name kernel: [    1.335858] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:40:33 joel-System-Product-Name kernel: [    1.336012] scsi2 : ata_piix
May  1 19:40:33 joel-System-Product-Name kernel: [    1.336056] scsi3 : ata_piix
May  1 19:40:33 joel-System-Product-Name kernel: [    1.336534] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:40:33 joel-System-Product-Name kernel: [    1.336536] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:40:33 joel-System-Product-Name kernel: [    2.527300] ata1.01: failed to resume link (SControl 0)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.527372] ata2.01: failed to resume link (SControl 0)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683294] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683307] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683318] ata2.01: link offline, clearing class 3 to NONE
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683431] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683443] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.691660] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:40:33 joel-System-Product-Name kernel: [    2.691889] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:40:33 joel-System-Product-Name kernel: [    2.691894] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.707601] ata2.00: configured for UDMA/100
May  1 19:40:33 joel-System-Product-Name kernel: [    2.707949] ata1.00: configured for UDMA/133
May  1 19:40:33 joel-System-Product-Name kernel: [    2.931978] Write protecting the kernel read-only data: 12288k
May  1 19:40:33 joel-System-Product-Name kernel: [    3.624618] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:41:12 joel-System-Product-Name kernel: [   56.679776] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:42:05 joel-System-Product-Name kernel: [  108.879269] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:42:57 joel-System-Product-Name kernel: [  161.078712] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:43:47 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:43:47 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  1 19:43:47 joel-System-Product-Name kernel: [    0.520567] libata version 3.00 loaded.
May  1 19:43:47 joel-System-Product-Name kernel: [    1.090897] ata_piix 0000:00:1f.2: version 2.13
May  1 19:43:47 joel-System-Product-Name kernel: [    1.090912] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.090916] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244032] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244230] scsi0 : ata_piix
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244278] scsi1 : ata_piix
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244898] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244902] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244915] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244920] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:43:47 joel-System-Product-Name kernel: [    1.399940] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:43:47 joel-System-Product-Name kernel: [    1.399950] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:43:47 joel-System-Product-Name kernel: [    1.400101] scsi2 : ata_piix
May  1 19:43:47 joel-System-Product-Name kernel: [    1.400145] scsi3 : ata_piix
May  1 19:43:47 joel-System-Product-Name kernel: [    1.400623] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.400624] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:43:47 joel-System-Product-Name kernel: [    2.591394] ata2.01: failed to resume link (SControl 0)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.595392] ata1.01: failed to resume link (SControl 0)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.747401] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.747414] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.747424] ata2.01: link offline, clearing class 3 to NONE
May  1 19:43:47 joel-System-Product-Name kernel: [    2.751393] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.751404] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.755573] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:43:47 joel-System-Product-Name kernel: [    2.759897] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:43:47 joel-System-Product-Name kernel: [    2.759903] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.771564] ata2.00: configured for UDMA/100
May  1 19:43:47 joel-System-Product-Name kernel: [    2.775867] ata1.00: configured for UDMA/133
May  1 19:43:47 joel-System-Product-Name kernel: [    2.829261] Write protecting the kernel read-only data: 12288k
May  1 19:43:47 joel-System-Product-Name kernel: [    3.195508] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:44:26 joel-System-Product-Name kernel: [   55.656264] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:45:18 joel-System-Product-Name kernel: [  107.880373] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:46:17 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:46:17 joel-System-Product-Name kernel: [    0.160937] PEBS disabled due to CPU errata.
May  1 19:46:17 joel-System-Product-Name kernel: [    0.520565] libata version 3.00 loaded.
May  1 19:46:17 joel-System-Product-Name kernel: [    1.094947] ata_piix 0000:00:1f.2: version 2.13
May  1 19:46:17 joel-System-Product-Name kernel: [    1.094963] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.094967] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248047] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248248] scsi0 : ata_piix
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248297] scsi1 : ata_piix
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248915] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248919] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248932] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248936] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:46:17 joel-System-Product-Name kernel: [    1.403956] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:46:17 joel-System-Product-Name kernel: [    1.403966] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:46:17 joel-System-Product-Name kernel: [    1.404115] scsi2 : ata_piix
May  1 19:46:17 joel-System-Product-Name kernel: [    1.404158] scsi3 : ata_piix
May  1 19:46:17 joel-System-Product-Name kernel: [    1.404634] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.404636] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:46:17 joel-System-Product-Name kernel: [    2.595414] ata1.01: failed to resume link (SControl 0)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.599412] ata2.01: failed to resume link (SControl 0)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.751419] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.751430] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.755406] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.755419] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.755429] ata2.01: link offline, clearing class 3 to NONE
May  1 19:46:17 joel-System-Product-Name kernel: [    2.759908] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:46:17 joel-System-Product-Name kernel: [    2.759913] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.763585] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:46:17 joel-System-Product-Name kernel: [    2.775877] ata1.00: configured for UDMA/133
May  1 19:46:17 joel-System-Product-Name kernel: [    2.779548] ata2.00: configured for UDMA/100
May  1 19:46:17 joel-System-Product-Name kernel: [    2.829373] Write protecting the kernel read-only data: 12288k
May  1 19:46:17 joel-System-Product-Name kernel: [    3.538974] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:46:55 joel-System-Product-Name kernel: [   55.656411] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:47:47 joel-System-Product-Name kernel: [  107.879896] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:48:40 joel-System-Product-Name kernel: [  160.105475] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:49:32 joel-System-Product-Name kernel: [  212.330928] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:50:24 joel-System-Product-Name kernel: [  264.556693] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:51:16 joel-System-Product-Name kernel: [  316.782014] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:52:39 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:52:39 joel-System-Product-Name kernel: [    0.160937] PEBS disabled due to CPU errata.
May  1 19:52:39 joel-System-Product-Name kernel: [    0.520567] libata version 3.00 loaded.
May  1 19:52:39 joel-System-Product-Name kernel: [    1.043326] ata_piix 0000:00:1f.2: version 2.13
May  1 19:52:39 joel-System-Product-Name kernel: [    1.043342] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.043345] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:52:39 joel-System-Product-Name kernel: [    1.195919] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196123] scsi0 : ata_piix
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196171] scsi1 : ata_piix
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196788] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196792] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196806] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196810] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:52:39 joel-System-Product-Name kernel: [    1.351838] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:52:39 joel-System-Product-Name kernel: [    1.351848] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:52:39 joel-System-Product-Name kernel: [    1.352000] scsi2 : ata_piix
May  1 19:52:39 joel-System-Product-Name kernel: [    1.352043] scsi3 : ata_piix
May  1 19:52:39 joel-System-Product-Name kernel: [    1.352519] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.352521] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:52:39 joel-System-Product-Name kernel: [    2.543292] ata1.01: failed to resume link (SControl 0)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.547290] ata2.01: failed to resume link (SControl 0)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.699302] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.699314] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.703279] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.703292] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.703302] ata2.01: link offline, clearing class 3 to NONE
May  1 19:52:39 joel-System-Product-Name kernel: [    2.707792] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:52:39 joel-System-Product-Name kernel: [    2.707797] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.711464] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:52:39 joel-System-Product-Name kernel: [    2.723761] ata1.00: configured for UDMA/133
May  1 19:52:39 joel-System-Product-Name kernel: [    2.727427] ata2.00: configured for UDMA/100
May  1 19:52:39 joel-System-Product-Name kernel: [    2.778915] Write protecting the kernel read-only data: 12288k
May  1 19:52:39 joel-System-Product-Name kernel: [    3.115693] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:53:19 joel-System-Product-Name kernel: [   56.680021] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:54:12 joel-System-Product-Name kernel: [  108.854141] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:55:04 joel-System-Product-Name kernel: [  161.027627] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:55:56 joel-System-Product-Name kernel: [  213.201013] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:57:03 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:57:03 joel-System-Product-Name kernel: [    0.160939] PEBS disabled due to CPU errata.
May  1 19:57:03 joel-System-Product-Name kernel: [    0.520567] libata version 3.00 loaded.
May  1 19:57:03 joel-System-Product-Name kernel: [    1.078955] ata_piix 0000:00:1f.2: version 2.13
May  1 19:57:03 joel-System-Product-Name kernel: [    1.078970] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.078974] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232046] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232241] scsi0 : ata_piix
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232290] scsi1 : ata_piix
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232911] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232915] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232929] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232933] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:57:03 joel-System-Product-Name kernel: [    1.387971] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:57:03 joel-System-Product-Name kernel: [    1.387980] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:57:03 joel-System-Product-Name kernel: [    1.388128] scsi2 : ata_piix
May  1 19:57:03 joel-System-Product-Name kernel: [    1.388170] scsi3 : ata_piix
May  1 19:57:03 joel-System-Product-Name kernel: [    1.388650] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.388652] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:57:03 joel-System-Product-Name kernel: [    2.579419] ata1.01: failed to resume link (SControl 0)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.591414] ata2.01: failed to resume link (SControl 0)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.735419] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.735430] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.743909] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:57:03 joel-System-Product-Name kernel: [    2.743914] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.747409] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.747422] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.747432] ata2.01: link offline, clearing class 3 to NONE
May  1 19:57:03 joel-System-Product-Name kernel: [    2.755583] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:57:03 joel-System-Product-Name kernel: [    2.759885] ata1.00: configured for UDMA/133
May  1 19:57:03 joel-System-Product-Name kernel: [    2.771580] ata2.00: configured for UDMA/100
May  1 19:57:03 joel-System-Product-Name kernel: [    2.819589] Write protecting the kernel read-only data: 12288k
May  1 19:57:03 joel-System-Product-Name kernel: [    3.559649] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:57:42 joel-System-Product-Name kernel: [   56.679918] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:58:25 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:58:25 joel-System-Product-Name kernel: [    0.160939] PEBS disabled due to CPU errata.
May  1 19:58:25 joel-System-Product-Name kernel: [    0.520561] libata version 3.00 loaded.
May  1 19:58:25 joel-System-Product-Name kernel: [    0.987001] ata_piix 0000:00:1f.2: version 2.13
May  1 19:58:25 joel-System-Product-Name kernel: [    0.987017] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:58:25 joel-System-Product-Name kernel: [    0.987020] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140088] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140287] scsi0 : ata_piix
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140335] scsi1 : ata_piix
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140953] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140957] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140972] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140975] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296007] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296016] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296165] scsi2 : ata_piix
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296207] scsi3 : ata_piix
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296687] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296689] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:58:25 joel-System-Product-Name kernel: [    2.487462] ata2.01: failed to resume link (SControl 0)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.487534] ata1.01: failed to resume link (SControl 0)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643458] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643469] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643589] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643602] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643612] ata2.01: link offline, clearing class 3 to NONE
May  1 19:58:25 joel-System-Product-Name kernel: [    2.651763] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:58:25 joel-System-Product-Name kernel: [    2.652142] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:58:25 joel-System-Product-Name kernel: [    2.652148] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.667754] ata2.00: configured for UDMA/100
May  1 19:58:25 joel-System-Product-Name kernel: [    2.668099] ata1.00: configured for UDMA/133
May  1 19:58:25 joel-System-Product-Name kernel: [    2.728083] Write protecting the kernel read-only data: 12288k
May  1 19:58:25 joel-System-Product-Name kernel: [    3.406815] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:59:03 joel-System-Product-Name kernel: [   54.647362] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:59:56 joel-System-Product-Name kernel: [  106.808641] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 20:00:48 joel-System-Product-Name kernel: [  158.982406] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 17:10:57 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 17:10:57 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 17:10:57 joel-System-Product-Name kernel: [    0.520567] libata version 3.00 loaded.
May  3 17:10:57 joel-System-Product-Name kernel: [    1.078781] ata_piix 0000:00:1f.2: version 2.13
May  3 17:10:57 joel-System-Product-Name kernel: [    1.078797] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.078800] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 17:10:57 joel-System-Product-Name kernel: [    1.231910] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232108] scsi0 : ata_piix
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232164] scsi1 : ata_piix
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232783] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232787] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232800] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232803] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 17:10:57 joel-System-Product-Name kernel: [    1.387816] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 17:10:57 joel-System-Product-Name kernel: [    1.387825] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 17:10:57 joel-System-Product-Name kernel: [    1.387980] scsi2 : ata_piix
May  3 17:10:57 joel-System-Product-Name kernel: [    1.388021] scsi3 : ata_piix
May  3 17:10:57 joel-System-Product-Name kernel: [    1.388499] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.388500] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 17:10:57 joel-System-Product-Name kernel: [    2.579281] ata2.01: failed to resume link (SControl 0)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.579352] ata1.01: failed to resume link (SControl 0)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735271] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735283] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735403] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735416] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735426] ata2.01: link offline, clearing class 3 to NONE
May  3 17:10:57 joel-System-Product-Name kernel: [    2.743586] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 17:10:57 joel-System-Product-Name kernel: [    2.743957] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 17:10:57 joel-System-Product-Name kernel: [    2.743962] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.759628] ata2.00: configured for UDMA/100
May  3 17:10:57 joel-System-Product-Name kernel: [    2.759854] ata1.00: configured for UDMA/133
May  3 17:10:57 joel-System-Product-Name kernel: [    2.809035] Write protecting the kernel read-only data: 12288k
May  3 17:10:57 joel-System-Product-Name kernel: [    3.245939] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 17:11:36 joel-System-Product-Name kernel: [   55.144502] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 17:12:29 joel-System-Product-Name kernel: [  107.344006] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 17:13:22 joel-System-Product-Name kernel: [  159.543367] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 17:14:14 joel-System-Product-Name kernel: [  211.742853] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:05:47 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 18:05:47 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 18:05:47 joel-System-Product-Name kernel: [    0.520568] libata version 3.00 loaded.
May  3 18:05:47 joel-System-Product-Name kernel: [    1.082793] ata_piix 0000:00:1f.2: version 2.13
May  3 18:05:47 joel-System-Product-Name kernel: [    1.082808] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.082812] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 18:05:47 joel-System-Product-Name kernel: [    1.235921] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236119] scsi0 : ata_piix
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236174] scsi1 : ata_piix
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236792] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236797] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236810] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236814] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 18:05:47 joel-System-Product-Name kernel: [    1.391840] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 18:05:47 joel-System-Product-Name kernel: [    1.391849] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 18:05:47 joel-System-Product-Name kernel: [    1.392005] scsi2 : ata_piix
May  3 18:05:47 joel-System-Product-Name kernel: [    1.392047] scsi3 : ata_piix
May  3 18:05:47 joel-System-Product-Name kernel: [    1.392523] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.392525] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 18:05:47 joel-System-Product-Name kernel: [    2.583290] ata2.01: failed to resume link (SControl 0)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.583361] ata1.01: failed to resume link (SControl 0)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739290] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739301] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739421] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739434] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739445] ata2.01: link offline, clearing class 3 to NONE
May  3 18:05:47 joel-System-Product-Name kernel: [    2.747640] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 18:05:47 joel-System-Product-Name kernel: [    2.747837] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 18:05:47 joel-System-Product-Name kernel: [    2.747839] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.763583] ata2.00: configured for UDMA/100
May  3 18:05:47 joel-System-Product-Name kernel: [    2.763913] ata1.00: configured for UDMA/133
May  3 18:05:47 joel-System-Product-Name kernel: [    2.798817] Write protecting the kernel read-only data: 12288k
May  3 18:05:47 joel-System-Product-Name kernel: [    3.176200] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 18:06:26 joel-System-Product-Name kernel: [   55.144275] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:07:18 joel-System-Product-Name kernel: [  107.368274] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:09:14 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 18:09:14 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 18:09:14 joel-System-Product-Name kernel: [    0.524560] libata version 3.00 loaded.
May  3 18:09:14 joel-System-Product-Name kernel: [    1.094896] ata_piix 0000:00:1f.2: version 2.13
May  3 18:09:14 joel-System-Product-Name kernel: [    1.094912] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.094915] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248027] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248228] scsi0 : ata_piix
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248283] scsi1 : ata_piix
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248901] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248905] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248918] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248922] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 18:09:14 joel-System-Product-Name kernel: [    1.403940] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 18:09:14 joel-System-Product-Name kernel: [    1.403950] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 18:09:14 joel-System-Product-Name kernel: [    1.404110] scsi2 : ata_piix
May  3 18:09:14 joel-System-Product-Name kernel: [    1.404150] scsi3 : ata_piix
May  3 18:09:14 joel-System-Product-Name kernel: [    1.404626] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.404628] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 18:09:14 joel-System-Product-Name kernel: [    2.595395] ata2.01: failed to resume link (SControl 0)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.595467] ata1.01: failed to resume link (SControl 0)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751391] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751403] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751522] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751535] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751545] ata2.01: link offline, clearing class 3 to NONE
May  3 18:09:14 joel-System-Product-Name kernel: [    2.759699] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 18:09:14 joel-System-Product-Name kernel: [    2.760067] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 18:09:14 joel-System-Product-Name kernel: [    2.760072] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.775735] ata2.00: configured for UDMA/100
May  3 18:09:14 joel-System-Product-Name kernel: [    2.775962] ata1.00: configured for UDMA/133
May  3 18:09:14 joel-System-Product-Name kernel: [    2.829592] Write protecting the kernel read-only data: 12288k
May  3 18:09:14 joel-System-Product-Name kernel: [    3.678183] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 18:09:53 joel-System-Product-Name kernel: [   56.168075] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:10:45 joel-System-Product-Name kernel: [  108.343180] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:11:37 joel-System-Product-Name kernel: [  160.516803] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:12:29 joel-System-Product-Name kernel: [  212.690177] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:13:22 joel-System-Product-Name kernel: [  264.863297] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:14:14 joel-System-Product-Name kernel: [  317.567260] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:48:42 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 19:48:42 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 19:48:42 joel-System-Product-Name kernel: [    0.520568] libata version 3.00 loaded.
May  3 19:48:42 joel-System-Product-Name kernel: [    1.086772] ata_piix 0000:00:1f.2: version 2.13
May  3 19:48:42 joel-System-Product-Name kernel: [    1.086787] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.086791] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 19:48:42 joel-System-Product-Name kernel: [    1.239905] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240104] scsi0 : ata_piix
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240160] scsi1 : ata_piix
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240777] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240781] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240794] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240797] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 19:48:42 joel-System-Product-Name kernel: [    1.395817] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 19:48:42 joel-System-Product-Name kernel: [    1.395827] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 19:48:42 joel-System-Product-Name kernel: [    1.395985] scsi2 : ata_piix
May  3 19:48:42 joel-System-Product-Name kernel: [    1.396025] scsi3 : ata_piix
May  3 19:48:42 joel-System-Product-Name kernel: [    1.396502] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.396504] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 19:48:42 joel-System-Product-Name kernel: [    2.587272] ata2.01: failed to resume link (SControl 0)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.587344] ata1.01: failed to resume link (SControl 0)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743273] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743285] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743404] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743417] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743428] ata2.01: link offline, clearing class 3 to NONE
May  3 19:48:42 joel-System-Product-Name kernel: [    2.751577] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 19:48:42 joel-System-Product-Name kernel: [    2.751956] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 19:48:42 joel-System-Product-Name kernel: [    2.751961] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.767567] ata2.00: configured for UDMA/100
May  3 19:48:42 joel-System-Product-Name kernel: [    2.767931] ata1.00: configured for UDMA/133
May  3 19:48:42 joel-System-Product-Name kernel: [    2.819321] Write protecting the kernel read-only data: 12288k
May  3 19:48:42 joel-System-Product-Name kernel: [    5.308117] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 19:49:17 joel-System-Product-Name kernel: [   55.657055] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:50:09 joel-System-Product-Name kernel: [  107.855783] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:51:02 joel-System-Product-Name kernel: [  160.054990] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:51:54 joel-System-Product-Name kernel: [  212.766524] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:52:47 joel-System-Product-Name kernel: [  264.965913] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:53:39 joel-System-Product-Name kernel: [  317.677133] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:54:32 joel-System-Product-Name kernel: [  369.876367] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:22:44 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 21:22:44 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 21:22:44 joel-System-Product-Name kernel: [    0.520566] libata version 3.00 loaded.
May  3 21:22:44 joel-System-Product-Name kernel: [    0.986974] ata_piix 0000:00:1f.2: version 2.13
May  3 21:22:44 joel-System-Product-Name kernel: [    0.986990] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 21:22:44 joel-System-Product-Name kernel: [    0.986993] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140069] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140266] scsi0 : ata_piix
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140314] scsi1 : ata_piix
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140934] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140939] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140952] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140956] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 21:22:44 joel-System-Product-Name kernel: [    1.295988] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 21:22:44 joel-System-Product-Name kernel: [    1.295997] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 21:22:44 joel-System-Product-Name kernel: [    1.296145] scsi2 : ata_piix
May  3 21:22:44 joel-System-Product-Name kernel: [    1.296186] scsi3 : ata_piix
May  3 21:22:44 joel-System-Product-Name kernel: [    1.296667] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 21:22:44 joel-System-Product-Name kernel: [    1.296668] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 21:22:44 joel-System-Product-Name kernel: [    2.487443] ata2.01: failed to resume link (SControl 0)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.487515] ata1.01: failed to resume link (SControl 0)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643438] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643449] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643567] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643581] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643591] ata2.01: link offline, clearing class 3 to NONE
May  3 21:22:44 joel-System-Product-Name kernel: [    2.651748] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 21:22:44 joel-System-Product-Name kernel: [    2.652138] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 21:22:44 joel-System-Product-Name kernel: [    2.652143] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.667739] ata2.00: configured for UDMA/100
May  3 21:22:44 joel-System-Product-Name kernel: [    2.668092] ata1.00: configured for UDMA/133
May  3 21:22:44 joel-System-Product-Name kernel: [    2.711850] Write protecting the kernel read-only data: 12288k
May  3 21:22:44 joel-System-Product-Name kernel: [    3.609510] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 21:23:21 joel-System-Product-Name kernel: [   54.647355] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:24:14 joel-System-Product-Name kernel: [  106.832332] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:25:06 joel-System-Product-Name kernel: [  159.031714] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:25:58 joel-System-Product-Name kernel: [  211.231336] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:26:50 joel-System-Product-Name kernel: [  263.430697] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:50:29 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  5 08:50:29 joel-System-Product-Name kernel: [    0.160936] PEBS disabled due to CPU errata.
May  5 08:50:29 joel-System-Product-Name kernel: [    0.520570] libata version 3.00 loaded.
May  5 08:50:29 joel-System-Product-Name kernel: [    0.967397] ata_piix 0000:00:1f.2: version 2.13
May  5 08:50:29 joel-System-Product-Name kernel: [    0.967412] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 08:50:29 joel-System-Product-Name kernel: [    0.967416] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  5 08:50:29 joel-System-Product-Name kernel: [    1.119961] ata_piix 0000:00:1f.2: setting latency timer to 64
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120159] scsi0 : ata_piix
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120208] scsi1 : ata_piix
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120829] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120834] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120848] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120852] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  5 08:50:29 joel-System-Product-Name kernel: [    1.275875] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  5 08:50:29 joel-System-Product-Name kernel: [    1.275885] ata_piix 0000:00:1f.5: setting latency timer to 64
May  5 08:50:29 joel-System-Product-Name kernel: [    1.276027] scsi2 : ata_piix
May  5 08:50:29 joel-System-Product-Name kernel: [    1.276069] scsi3 : ata_piix
May  5 08:50:29 joel-System-Product-Name kernel: [    1.276549] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  5 08:50:29 joel-System-Product-Name kernel: [    1.276551] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  5 08:50:29 joel-System-Product-Name kernel: [    2.467337] ata2.01: failed to resume link (SControl 0)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.467409] ata1.01: failed to resume link (SControl 0)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623326] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623338] ata1.01: SATA link down (SStatus 0 SControl 0)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623458] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623471] ata2.01: SATA link down (SStatus 0 SControl 0)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623481] ata2.01: link offline, clearing class 3 to NONE
May  5 08:50:29 joel-System-Product-Name kernel: [    2.631637] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  5 08:50:29 joel-System-Product-Name kernel: [    2.632017] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  5 08:50:29 joel-System-Product-Name kernel: [    2.632022] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.647630] ata2.00: configured for UDMA/100
May  5 08:50:29 joel-System-Product-Name kernel: [    2.647972] ata1.00: configured for UDMA/133
May  5 08:50:29 joel-System-Product-Name kernel: [    2.708207] Write protecting the kernel read-only data: 12288k
May  5 08:50:29 joel-System-Product-Name kernel: [    3.095674] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  5 08:51:08 joel-System-Product-Name kernel: [   55.144736] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:52:00 joel-System-Product-Name kernel: [  107.344098] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:52:52 joel-System-Product-Name kernel: [  159.543470] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:53:45 joel-System-Product-Name kernel: [  211.742831] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:54:37 joel-System-Product-Name kernel: [  263.942318] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:55:29 joel-System-Product-Name kernel: [  316.141894] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:05:00 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  5 12:05:00 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  5 12:05:00 joel-System-Product-Name kernel: [    0.520564] libata version 3.00 loaded.
May  5 12:05:00 joel-System-Product-Name kernel: [    1.102908] ata_piix 0000:00:1f.2: version 2.13
May  5 12:05:00 joel-System-Product-Name kernel: [    1.102923] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.102927] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256047] ata_piix 0000:00:1f.2: setting latency timer to 64
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256238] scsi0 : ata_piix
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256286] scsi1 : ata_piix
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256904] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256908] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256921] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256926] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  5 12:05:00 joel-System-Product-Name kernel: [    1.411964] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  5 12:05:00 joel-System-Product-Name kernel: [    1.411974] ata_piix 0000:00:1f.5: setting latency timer to 64
May  5 12:05:00 joel-System-Product-Name kernel: [    1.412128] scsi2 : ata_piix
May  5 12:05:00 joel-System-Product-Name kernel: [    1.412172] scsi3 : ata_piix
May  5 12:05:00 joel-System-Product-Name kernel: [    1.412651] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.412652] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  5 12:05:00 joel-System-Product-Name kernel: [    2.603416] ata1.01: failed to resume link (SControl 0)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.607415] ata2.01: failed to resume link (SControl 0)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.759420] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.759431] ata1.01: SATA link down (SStatus 0 SControl 0)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.763409] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.763422] ata2.01: SATA link down (SStatus 0 SControl 0)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.763432] ata2.01: link offline, clearing class 3 to NONE
May  5 12:05:00 joel-System-Product-Name kernel: [    2.767926] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  5 12:05:00 joel-System-Product-Name kernel: [    2.767931] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.771587] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  5 12:05:00 joel-System-Product-Name kernel: [    2.783896] ata1.00: configured for UDMA/133
May  5 12:05:00 joel-System-Product-Name kernel: [    2.787553] ata2.00: configured for UDMA/100
May  5 12:05:00 joel-System-Product-Name kernel: [    2.839751] Write protecting the kernel read-only data: 12288k
May  5 12:05:00 joel-System-Product-Name kernel: [    3.286654] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  5 12:05:39 joel-System-Product-Name kernel: [   55.656387] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:06:34 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  5 12:06:34 joel-System-Product-Name kernel: [    0.160939] PEBS disabled due to CPU errata.
May  5 12:06:34 joel-System-Product-Name kernel: [    0.520570] libata version 3.00 loaded.
May  5 12:06:34 joel-System-Product-Name kernel: [    0.990997] ata_piix 0000:00:1f.2: version 2.13
May  5 12:06:34 joel-System-Product-Name kernel: [    0.991013] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 12:06:34 joel-System-Product-Name kernel: [    0.991017] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144086] ata_piix 0000:00:1f.2: setting latency timer to 64
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144287] scsi0 : ata_piix
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144335] scsi1 : ata_piix
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144956] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144960] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144975] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144979] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300006] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300016] ata_piix 0000:00:1f.5: setting latency timer to 64
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300165] scsi2 : ata_piix
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300207] scsi3 : ata_piix
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300688] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300689] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  5 12:06:34 joel-System-Product-Name kernel: [    2.491460] ata1.01: failed to resume link (SControl 0)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.495470] ata2.01: failed to resume link (SControl 0)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.647468] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.647480] ata1.01: SATA link down (SStatus 0 SControl 0)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.651457] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.651470] ata2.01: SATA link down (SStatus 0 SControl 0)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.651480] ata2.01: link offline, clearing class 3 to NONE
May  5 12:06:34 joel-System-Product-Name kernel: [    2.655950] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  5 12:06:34 joel-System-Product-Name kernel: [    2.655955] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.659633] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  5 12:06:34 joel-System-Product-Name kernel: [    2.671929] ata1.00: configured for UDMA/133
May  5 12:06:34 joel-System-Product-Name kernel: [    2.675585] ata2.00: configured for UDMA/100
May  5 12:06:34 joel-System-Product-Name kernel: [    2.728252] Write protecting the kernel read-only data: 12288k
May  5 12:06:34 joel-System-Product-Name kernel: [    3.360051] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  5 12:07:11 joel-System-Product-Name kernel: [   54.647516] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:08:05 joel-System-Product-Name kernel: [  106.832492] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:08:58 joel-System-Product-Name kernel: [  159.031854] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:09:50 joel-System-Product-Name kernel: [  211.231339] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:10:42 joel-System-Product-Name kernel: [  263.430826] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:11:34 joel-System-Product-Name kernel: [  315.630437] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:12:27 joel-System-Product-Name kernel: [  367.829924] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:13:19 joel-System-Product-Name kernel: [  420.029285] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:14:11 joel-System-Product-Name kernel: [  472.228647] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:15:03 joel-System-Product-Name kernel: [  524.428256] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:15:55 joel-System-Product-Name kernel: [  576.627618] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:16:48 joel-System-Product-Name kernel: [  628.826834] sd 4:0:0:0: [sdb] Asking for cache data failed

... Que j'ai bien du mal à interpréter ( Quant à sdb , il n'y a qu'un disque dur et pas de clé usb connectée , c'est peut-être un lecteur de cartes ? )
Merci pour l'aide

#19 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 06/05/2013, à 23:56

joe97
Réponses : 16

Bonsoir
Je fais des recherches dans le forum et dans la doc mais je ne comprends toujours pas d'où vient le problème :

- Quand l'ordinateur freeze ( au bout d'une ou deux minutes ) , le clavier semble ne plus  répondre ( pas moyen d'utiliser Ctrl Alt F1 par exemple ) , MAIS je viens de vérifier ( Je n'y avais pas pensé avant ) que Alt Syst b par exemple fonctionne ( immédiatement ou presque )

- Même quand l'ordinateur est gelé , je peux néanmoins le  contrôler  via ssh par exemple . J'ai ainsi pu faire quelques tests et aussi installer des logiciels . Le disque dur doit donc fonctionner correctement ?

- Les plantages apparaissent en mode graphique seulement . En mode console , il n'y a pas de gel ( mais néanmoins une multitude de messages d'erreur du type :
  Asking for cache data failed
  Assuming drive cache : write through ...
( Cela fait référence à un disque sdb inexistant à moins que cela corresponde à un lecteur de cartes )

Merci d'éclairer ma lanterne pas très brillante en ce moment ...


PS : Pas moyen non plus de démarrer en mode de récupération ou sur un noyau antérieur . L'écran de Grub n'apparaît pas au démarrage , mais cela date de l'installation et ça n'a sans doute aucun rapport avec le problème actuel ...

#20 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 08/05/2013, à 12:01

joe97
Réponses : 16

Je n'ai toujours pas résolu le problème .
Les données SMART du disque dur indiquent qu'il est en parfait état  ..
Après quelques interventions ( pas toujours faciles car le système se bloque parfois très vite , après une ou deux minutes en mode graphique ) , il y a eu un problème avec Compiz que j'ai désactivé . Et là , utilisation inconfortable mais plus de plantage pendant une quinzaine de minutes , après quoi , j'ai redémarré .
Au redémarrage , Compiz était réactivé mais le système est resté stable ( pendant au moins une demi-heure )
Je pensais le problème résolu ... Mais au redémarrage suivant les problèmes sont revenus .

Je pense qu'il y a peut-être un problème avec Compiz
A moins qu'il n'y ait un problème de gestion des disques
Quelqu'un aurait-il une idée à ce sujet ?

Sinon , je vais m'orienter vers une réinstallation ( Peut-être avec une autre version d'ubuntu ou une autre distribution ) ce qui permettrait de voir si le problème est lié ou non au matériel ... Sauf si on me suggère une autre piste .

#21 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 08/05/2013, à 12:28

joe97
Réponses : 16

Merci pour la réponse
Effectivement c'est une idée
Dois-je le supprimer
( par exemple apt-get remove compiz   apt-get remove compiz-core )  ?

Merci pour l'aide

#22 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 08/05/2013, à 12:35

joe97
Réponses : 16

Je vais essayer cet après-midi
Mais si l'essai est concluant , quelle serait la solution ? ( Pour revenir à une utilisation normale ? )

EDIT : Je n'ai pas installé Compiz  . A un moment donné , j'ai eu un message disant qu'il y avait un problème avec Compiz et me proposant de le désactiver , ce que j'ai fait ( Un choix était proposé )
Mais je n'ai installé que Ubuntu 12.04 , et gnome-shell . Je suppose que Compiz était présent par défaut ou comme dépendance d'un autre paquet.
( Je pensais en fait qu'il était utilisé par Unity )

( Une fois désactivé , il n'y a plus moyen de redimensionner ou de fermer les fenêtres par exemple . On ne parle peut-être pas du même paquet ?? )

#23 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 08/05/2013, à 15:39

joe97
Réponses : 16

Après plusieurs essais ( plantages ) j'ai pu réinstaller Compiz via Synaptic mais ça ne change rien
Il doit y avoir un autre problème plus général

En console , j'ai ce message :

[ 23.674175 ] [ drm : gen6_sanitize_pm ] * ERROR * Power management discrepancy : GEN6_RP_INTERRUPT_LIMITS expected 00110000, was 16000000

( Recopié à la main )

( Qui était déjà apparu , parmi d'autres , précédemment )


EDIT
Une recherche google m'a amené à ce post ( les autres sont en anglais ) :
http://forum.ubuntu-fr.org/viewtopic.php?pid=13350661
où j'ai aussi vu comment faire apparaître le menu Grub ...

Il semble donc qu'il s'agit d'un bug de la dernière version du noyau .
https://bugs.launchpad.net/ubuntu/+sour … ug/1167669

Ceci ressemble également :
https://bugs.launchpad.net/ubuntu/+sour … ug/1168467
vu sur
http://forum.ubuntu-fr.org/viewtopic.php?pid=13334821

La solution est donc de démarrer sur une version antérieure
Ça a l'air de marcher pour le moment , j'attends toutefois encore un peu avant de passer en Résolu

#24 Re : -1 »  [Résolu] instabilité 12.04 après mise à jour » Le 09/05/2013, à 11:12

joe97
Réponses : 16

@philoup44
Il s'agit du noyau 3.2.0-40 sur l'ordinateur qui pose problème ( En 64 bits )
En revenant au 3.2.0-38 cela fonctionne sans problème

Quant au noyau 3.2.0-41 ( que j'ai sur mon ordinateur , celui où il y a problème n'étant pas le mien ) , il n'a pas été possible de l'installer sur l'ordinateur posant problème .
Le bug  que j'ai d'ailleurs concerne bien le noyau 3.2.0-40  :
https://bugs.launchpad.net/ubuntu/+sour … ug/1167669
Il n'y a plus qu'à attendre que ce bug soit corrigé ...

Comme L'ordinateur refonctionne , je passe le post en " Résolu"

Encore merci à tous !
Joel