Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

nombre réponses : 25

#0 Re : -1 »  De Nautilus à Nemo... » Le 29/11/2014, à 16:50

LRDP
Réponses : 23

Merci pour tous ces renseignements !
Nostalgique de Gnome 2, j'ai trouvé Mate pour travailler avec plaisir sous la 14.04. Caja est tellement bien conçu, que je croyais être sous Nautilus roll. Par contre, ce qui manque dans Caja, c'est l'onglet "Partage de réseau local" pour les propriétés des disques (pareil pour Nemo ou Dolphin d'ailleurs). C'était bien pratique pour gérer le réseau local, car Nautilus plante  (bizarrement) si on y cherche à modifier les propriétés des disques. Samba y remédie, mais c'était pratique d'avoir un tout-en-un graphique. Mais, Mate c'est cool

#1 Re : -1 »  Nautilus plante. » Le 11/11/2014, à 21:16

LRDP
Réponses : 6

Remonte petit topic !
Même problème : Nautilus lancé par gksudo, affiche un disque correctement, mais quand je veux changer les permissions des dossiers ou faire un partage local, il plante et je lis cela sur le terminal :

lrdp@lrdp-MS-7640:~$ gksudo nautilus

(nautilus:4624): Gtk-WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
**
ERROR:nautilus-properties-window.c:1839:schedule_owner_change_timeout: assertion failed: (NAUTILUS_IS_FILE (file))
lrdp@lrdp-MS-7640:~$ 

Un Ubuntero aurait-il une solution et/ou une explication? Merci!

#2 Re : -1 »  Nautilus plante. » Le 23/11/2014, à 12:42

LRDP
Réponses : 6

Up,
même problème que l'on lance Nautilus avec sudo ou gksudo :

lrdp@lrdp-MS-7640:~$ gksudo nautilus
**
ERROR:nautilus-properties-window.c:1839:schedule_owner_change_timeout: assertion failed: (NAUTILUS_IS_FILE (file))
e name org.gnome.SessionManager was not provided by any .service files
lrdp@lrdp-MS-7640:~$ 
lrdp@lrdp-MS-7640:~$ sudo nautilus
[sudo] password for lrdp: 

(nautilus:23582): Gtk-WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
**
ERROR:nautilus-properties-window.c:1839:schedule_owner_change_timeout: assertion failed: (NAUTILUS_IS_FILE (file))

Par contre, Dolphin en Root permet de modifier les permissions et les propriétés des fichiers sans planter. Bon, il y a toujours en ligne de commande sudo chown et chgrp , mais si on veut faire du graphique, Nautilus n'est plus ce qu'il était quand on travaille dans un fork comme Mate ou d'autre Mint, Lubuntu...  Un bug ancien qui revient régulièrement, mais peut-on le corriger sur sa propre machine?

#3 -1 »  Disque racine plein sans raison apparente [RÉSOLU] » Le 11/11/2014, à 18:29

LRDP
Réponses : 1

Bonjour à la Communauté,
Après avoir lancé par Grsync une sauvegarde d'un disque accessoire (un des 2Tos) sur un autre 2 To, le disque racine de 120 Go habituellement plein à 50% s'est rempli à 100%. J'ai cru à un remplissage d'un fichier cache ou Temp par Grsync, mais je n'ai rien trouvé. Baobab indique que / est plein, ainsi que le /home. J'arrive toujours à rentrer dans la configuration, faire des transferts de fichiers, jouer au Mah-jong roll mais je ne peux plus naviguer sur Internet par Firefox (qui a perdu tous ses marque-pages et son historique) ni voir les mails par Thunderbird (répertoire de courrier "plein") et Nautilus indique qu'il n'y a plus de place sur le disque racine. Je discute donc à partir d'une Live-USB. J'ai fait les commande du -H qui ne montre pas de fichier trop gros, ni du -sk *|sort -rn. J'ai fait du sudo autoclean, autoremove... sans succès. J'ai défait la sauvegarde, supprimer Grsync... Rien n'y fait, j'ai toujours / plein à 100% . Une piste peut-être, mais curieuse : lors de l'installation de Trusty, deux disques (justement celui qui reçoit les sauvegardes et celui que j'ai sauvegardé) se sont installés et se montent non pas dans /media directement mais dans /media/lrdp , lrdp étant le nom de mon /home; cela marchait pourtant correctement avant cette opération de sauvegarde, quoique Nautilus lancé en root ne pouvait lire les propriétés de ces disques plantant juste après le message "Nautilus ne peut changer de propriétaire". Piste seulement peut-être, car il n'y avait pas de problème de trop plein avant.

Merci pour vos idées! Je ne sais pas si je peux donner les réponses de commandes étant en Live-USB...

#4 Re : -1 »  Disque racine plein sans raison apparente [RÉSOLU] » Le 11/11/2014, à 19:28

LRDP
Réponses : 1

RESOLU, c'est très bête !!
J'ai pensé à faire gksudo baobab et il m'a indiqué que dans le dossier personnel de Root, le dossier Trash dépassait les 85Go, alors que tous les autres moyens d'indications montraient que la poubelle était vide... Donc, par Nautilus en root j'ai effacé le dossier files de trash et cela a libéré 80Go de / . CQFD

#5 -1 »  Lien ed2k ouvrant plusieurs fenêtres » Le 23/08/2014, à 18:35

LRDP
Réponses : 4

Bonjour à tous,
Voilà un petit problème qui se pose depuis que j'utilise Amule depuis peu  (auparavant j'utilisais Emule avec Wine). Lorsque je souhaite télécharger plusieurs liens Ed2k, Amule ouvre plusieurs fenêtres correspondant à chaque lien, au lieu de n'ouvrir que la fenêtre en fonction qui devrait charger tous les liens. Emule sous Wine ne le faisait pas. Ce phénomène empêche la fenêtre principale de charger tous les liens et corrompt la commande. Je suis sous 14.04 Mate.

Auriez-vous une solution?
Un grand merci!

#6 Re : -1 »  Lien ed2k ouvrant plusieurs fenêtres » Le 24/08/2014, à 10:05

LRDP
Réponses : 4

Merci, mais cela ne m'aide pas tellement. BitTorrent fonctionne aussi, mais j'utilise très peu, je préfère Amule qui est de l'Emule adapté à Mac et Linux. Mais il y a ce problème de liens qui ouvre une fenre pour chaque lien au lieu de tout regrouper.

#9 Re : -1 »  multi calques avec Gimp » Le 29/08/2014, à 20:27

LRDP
Réponses : 4

Bonsoir,
Je reprends le topic pour demander aux connaisseurs comment se sauvegarde le fichier animé : je suis le tutoriel de la documentation, j'ai mes deux images, le nombre de pas, je valide, mais, ensuite, rien ne se passe et je ne trouve pas le fichier créé par Gimp-Gap, je n'ai pas non plus trouver de boite de dialogue m'indiquant un enregistrement ou une exportation d'images. Où est l'erreur?

#10 Re : -1 »  multi calques avec Gimp » Le 30/08/2014, à 16:40

LRDP
Réponses : 4

Merci!, çà commence à fonctionner, mais la première image disparaît tout de suite, la deuxième apparaît claire de suite puis les calques de la deuxième se succèdent progressivement. Je pense ne pas configurer le morphing correctement, à moins que le découpage de calques demandé lors de l'export ne s'effectue pas comme il faut... Hmmm, pas facile le Gimp-Gap.

#11 -1 »  [RÉSOLU] Aperçu sonore disparu dans Mate » Le 10/08/2014, à 16:11

LRDP
Réponses : 1

Bonjour,
J'ai installé Mate pour retrouver l'interface type Gnome 2 que j'appréciais énormément (simple, dépouillée), ne me faisant pas à Unity. J'étais très heureux de retrouver l'aperçu sonore où il suffisait de promener le souris sur une vignette audio pour entendre le morceau de musique. Hors, peut-être après un reboot après une mise à jour, l'aperçu a disparu, imposant de lancer Rythmbox pour entendre la musique. J'ai désinstallé Rythmbox, mais il faut toujours lancer la musique (là par Totem) pour l'entendre. C'était pourtant bien pratique cet aperçu. Un composant a du disparaître lors d'une mise à jour, mais lequel?

#12 Re : -1 »  [RÉSOLU] Aperçu sonore disparu dans Mate » Le 10/08/2014, à 16:46

LRDP
Réponses : 1

Résolu tout seul : Système/Préférences/Gestion des fichiers/Aperçu : cocher dans "fichiers son"  l'onglet "Toujours" au lieu de "Uniquement les fichiers locaux". et çà marche.
Comme dit Platon :"Si tu cherches bien, tu trouveras"

#13 Re : -1 »  Raccourcis bureau » Le 02/08/2014, à 17:57

LRDP
Réponses : 23

J'en remets une couche. lol
Comme pas mal d'utilisateurs, apparemment, je regrette la simplicité, la clarté, la sobriété, l'efficacité de l'interface Gnome 2 que j'avais sous Lucid. Avec Trusty et son Unity, je me demande à quoi sert d'avoir un bureau si on ne peut pas y mettre un lanceur fixe. bon, il y a bien une ligne de commande qui le permet, mais il faut en plus connaître le nom de l'application : par exemple, je voulais mettre Disk Utility sur le bureau (Palimpset) qui ne fonctionne plus sous Trusty, et "Disques" dans le Dash n'est pas le nom de l'application, donc pas possible de créer un lanceur. C'est bien joli d'avoir une colonne de lanceurs à gauche, mais s'il faut tout dérouler pour trouver l’icône d'une appli quand il y en a une quarantaine, cette colonne n'a aucune utilité, le Dash est alors un peu plus rapide, mais c'est quand même plus simple de cliquer sur une icone de bureau (on ne peut pas glisser l'icone, contrairement à ce qui est indiqué dans la doc). Avoir des lanceurs dans la barre du haut était bien pratique aussi, comme les menus déroulants système, préférences.... J5012 dit de s'adapter ou de retourner sous Windows, mais si on utilise Ubuntu, c'était bien pour s'en libérer, alors avoir de nouvelles versions qui s'identifient à MacOS, avec un petit mélange de Microsoft, c'est dommage et bête, car c'est uniquement l'interface qui se complique alors que cela ne doit servir qu'à lancer des applications et gérer la machine. Il y a bien Gnome-Flashback, mais si çà disparaît aussi sur les versions 15 et plus, tristesse...
Comment alors coder, ou scripter une interface classique, pour un non-informaticien?

Bon, après avoir poussé la gueulante, il y a une soluce : dans /usr/bin, il y a tous les .sh, faire un clic droit sur l'appli - quand on reconnaît son nom - cliquer sur "script" puis "lien sur le bureau", une petite fenêtre s'ouvre pour demander le nom qui sera affiché sur le bureau et le tour est joué : j'ai un lanceur sur le bureau... Après il faut personnaliser l’icône si on veut faire joujou.

Il faudrait mettre [RESOLU] au début ...?

#14 Re : -1 »  Raccourcis bureau » Le 02/08/2014, à 20:09

LRDP
Réponses : 23

Merci Alca94, je ne connaissais pas ClassicMenu. Bon petit truc qui simplifie un peu les choses. cool

#15 Re : -1 »  Raccourcis bureau » Le 05/08/2014, à 12:19

LRDP
Réponses : 23

Merci Tiramiseb pour indiquer Mate que je ne connaissais pas non plus : c'est EXACTEMENT ce que je cherchais : une interface comme Lucid et Gnome 2. Je retrouve toutes les fonctionnalités de l'interface, même l'aperçu sonore. Félicitations aux créateurs de ce fork cool cool

#16 -1 »  [RÉSOLU] Aperçu sonore » Le 02/08/2014, à 20:31

LRDP
Réponses : 2

Bonsoir,
Dans les anciennes versions, il était possible d'avoir un aperçu d'un fichier son en passant le curseur de la souris sur l'icone du fichier. Sous 14.04, il ne se passe rien et il faut lancer Rythmbox pour écouter le fichier. J'ai installé Gnome-sushi, mais il ne se passe rien. Existe-t-il un moyen pour un aperçu sonore sous Trusty? Je ne trouve rien dans la doc ou le forum.

#17 Re : -1 »  [RÉSOLU] Aperçu sonore » Le 03/08/2014, à 09:49

LRDP
Réponses : 2

Effectivement, çà marche.
Je préférais quand la souris frôlait juste l'icone, c'était plus simple.

Je mets RESOLU quand même.

#18 -1 »  [RÉSOLU] Problèmes de partitions et Kernel Panic » Le 29/07/2014, à 13:38

LRDP
Réponses : 6

Bonjour,
Mon Ubuntu est en panne depuis un mois. D'abord sous 10.04 et malgré réinstallation, mises à jour etc..., les problèmes continuent sous 14.04 : Ubuntu s'obstinent à démarrer sur une partition erronée, malgré le fstab  et les réparation par Boot-Repair, ce qui entraîne lenteur et perte des USB.

Tout d'abord la config du PC : Ma config : core: AMD 64 Fx6100 6 coeurs AM3+ , CM : MSI 990FXA GD65, carte graphique Asus GTX 550TI 1Go, RAM Corsair DDR3 1600 8Go, Disque SSD de 120 Go Corsair Force GT (où est installé Ubuntu), 2 disques WD 2 To + 1 de 500 Go (tous en Ext4)
Ubuntu (la racine / ) est sur le Corsair SSD. Une fois sur 5 (ou 10) un "bon" boot se fait sur sda1 (ou se trouve /) correspondant à Fstab et blkid, et là, la machine tourne rond avec ses USB et tout et tout. Mais la plupart du temps, un reboot se fait sur sdd ou sdb (devenu sdd1 ou sdb1), là fstab ne correspond plus à blkid et tout va mal, voire démarre en kernel panic... Si j'aligne fstab sur blkid: même chose, si je débranche tous les disques: idem. Le /media est fou : des USB non fonctionnels (lsusb ne peut s'afficher) et un des disques se monte obstinément sur un fichier du même nom que mon dossier personnel.

Le blkid:

lrdp@lrdp-MS-7640:~$ sudo blkid
[sudo] password for lrdp: 
/dev/sda1: LABEL="Volume 2To" UUID="5e728d9a-d92b-40db-b5e2-53c715b63934" TYPE="ext4" 
/dev/sdb1: LABEL="Documents" UUID="64bf8cd7-be61-4d1b-9530-db00de251afa" TYPE="ext4" 
/dev/sdc1: UUID="42579596-5332-4571-957c-be5efcb78887" TYPE="ext4" 
/dev/sdc5: UUID="429b6981-6923-45cd-8752-e1ad109dac94" TYPE="swap" 
/dev/sdd1: LABEL="Nouveau volume" UUID="f57c1c25-8313-469e-a1bc-9177a6549d1a" TYPE="ext4"

le fstab:

lrdp@lrdp-MS-7640:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

#Entry for /dev/sda1 :
UUID=42579596-5332-4571-957c-be5efcb78887	/	ext4	errors=remount-ro	0	1
#Entry for /dev/sdb1 :
UUID=64bf8cd7-be61-4d1b-9530-db00de251afa	/media/Documents_	ext4	defaults	0	2
#Entry for /dev/sdd1 :
UUID=f57c1c25-8313-469e-a1bc-9177a6549d1a	/media/Nouveau040volume_	ext4	defaults	0	2
#Entry for /dev/sda5 :
UUID=429b6981-6923-45cd-8752-e1ad109dac94	none	swap	sw	0	0

le lspci:

lrdp@lrdp-MS-7640:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port F)
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port G)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
05:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
06:06.0 USB controller: NEC Corporation OHCI USB Controller (rev 43)
06:06.1 USB controller: NEC Corporation OHCI USB Controller (rev 43)
06:06.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04)

le fdsik -l:

lrdp@lrdp-MS-7640:~$ sudo fdisk -l

Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xb14db14e

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1              63  3907029167  1953514552+  83  Linux

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdb » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


Disk /dev/sdb: 500.1 GB, 500106780160 bytes
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976771055 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xb14db14d

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1               1   976771054   488385527   ee  GPT

Disk /dev/sdc: 120.0 GB, 120033041920 bytes
255 têtes, 63 secteurs/piste, 14593 cylindres, total 234439535 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xd119d119

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdc1   *          63   217873529   108936733+  83  Linux
/dev/sdc2       217873591   234436544     8281477    5  Étendue
/dev/sdc5       217873593   234436544     8281476   82  partition d'échange Linux / Solaris

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdd » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x1b908688

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdd1               1  3907029167  1953514583+  ee  GPT
lrdp@lrdp-MS-7640:~$ 

le lsusb ne s'affiche pas.

le /media

 lrdp@lrdp-MS-7640:~$ ls /media
apt     Documents_  lrdp               usb   usb2  usb5
cdrom   floppy      Nouveau040volume_  usb0  usb3  usb6
cdrom0  floppy0     STORE.zip          usb1  usb4  usb7
lrdp@lrdp-MS-7640:~$ 

Le disque "Volume 2To" est dans le fichier lrdp, malgré le fait d'avoir débranché le disque, formaté, changé la partition... et supprimé ce ficher vide "lrdp" de /media, il se recrée automatiquement.

Enfin un dmseg:

lrdp@lrdp-MS-7640:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=42579596-5332-4571-957c-be5efcb78887 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf000fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf001000-0x00000000cf08bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf08c000-0x00000000cf161fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf162000-0x00000000cf169fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cf16a000-0x00000000cf2adfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf2ae000-0x00000000cf2aefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf2af000-0x00000000cf2befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf2bf000-0x00000000cf2c5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf2c6000-0x00000000cf2ecfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf2ed000-0x00000000cf4effff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf4f0000-0x00000000cf779fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf77a000-0x00000000cfeebfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cfeec000-0x00000000cfefffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000022effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MSI MS-7640/990FXA-GD65 (MS-7640), BIOS V19.5 11/28/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000022f000000 aka 8944M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] total RAM covered: 3327M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fce20-0x000fce2f] mapped at [ffff8800000fce20]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22ee00000-0x22effffff]
[    0.000000]  [mem 0x22ee00000-0x22effffff] page 2M
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22c000000-0x22edfffff]
[    0.000000]  [mem 0x22c000000-0x22edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[    0.000000]  [mem 0x200000000-0x22bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcf000fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xceffffff] page 2M
[    0.000000]  [mem 0xcf000000-0xcf000fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcf4f0000-0xcf779fff]
[    0.000000]  [mem 0xcf4f0000-0xcf779fff] page 4k
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcfeec000-0xcfefffff]
[    0.000000]  [mem 0xcfeec000-0xcfefffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
[    0.000000]  [mem 0x100200000-0x13fffffff] page 2M
[    0.000000]  [mem 0x140000000-0x1ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x34ac8000-0x3655bfff]
[    0.000000] ACPI: RSDP 00000000000f0450 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000cf162068 000054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000cf167f18 0000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
[    0.000000] ACPI: DSDT 00000000cf162150 005DC2 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cf2c0f80 000040
[    0.000000] ACPI: APIC 00000000cf168010 00009E (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000cf1680b0 00003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 00000000cf1680f0 000038 (v01 ALASKA    A M I 01072009 AMI  00000004)
[    0.000000] ACPI: SSDT 00000000cf168128 001158 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: BGRT 00000000cf169280 00003C (v00 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x22effffff]
[    0.000000]   NODE_DATA [mem 0x22eff6000-0x22effafff]
[    0.000000]  [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x22effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xcf000fff]
[    0.000000]   node   0: [mem 0xcf4f0000-0xcf779fff]
[    0.000000]   node   0: [mem 0xcfeec000-0xcfefffff]
[    0.000000]   node   0: [mem 0x100001000-0x22effffff]
[    0.000000] On node 0 totalpages: 2089531
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13195 pages used for memmap
[    0.000000]   DMA32 zone: 844447 pages, LIFO batch:31
[    0.000000]   Normal zone: 19392 pages used for memmap
[    0.000000]   Normal zone: 1241087 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 72
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf001000-0xcf08bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf08c000-0xcf161fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf162000-0xcf169fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf16a000-0xcf2adfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf2ae000-0xcf2aefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf2af000-0xcf2befff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf2bf000-0xcf2c5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf2c6000-0xcf2ecfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf2ed000-0xcf4effff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf77a000-0xcfeebfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xcff00000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022ec00000 s86336 r8192 d24256 u262144
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2056859
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=42579596-5332-4571-957c-be5efcb78887 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ ccf8000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 8050668K/8358124K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 307456K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:1288 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3299.951 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.90 BogoMIPS (lpj=13199804)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000032] Security Framework initialized
[    0.000051] AppArmor: AppArmor initialized
[    0.000053] Yama: becoming mindful.
[    0.000754] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002881] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003837] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.003850] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.004080] Initializing cgroup subsys memory
[    0.004086] Initializing cgroup subsys devices
[    0.004088] Initializing cgroup subsys freezer
[    0.004090] Initializing cgroup subsys blkio
[    0.004091] Initializing cgroup subsys perf_event
[    0.004094] Initializing cgroup subsys hugetlb
[    0.004112] tseg: 00cff00000
[    0.004115] CPU: Physical Processor ID: 0
[    0.004115] CPU: Processor Core ID: 0
[    0.004117] mce: CPU supports 7 MCE banks
[    0.004123] LVT offset 1 assigned for vector 0xf9
[    0.004129] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.004129] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.004129] tlb_flushall_shift: 5
[    0.004221] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
[    0.005055] ACPI: Core revision 20131115
[    0.007329] ACPI: All ACPI Tables successfully acquired
[    0.051327] ftrace: allocating 28495 entries in 112 pages
[    0.064605] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.104252] smpboot: CPU0: AMD FX(tm)-6100 Six-Core Processor (fam: 15, model: 01, stepping: 02)
[    0.211476] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.211480] ... version:                0
[    0.211482] ... bit width:              48
[    0.211483] ... generic registers:      6
[    0.211484] ... value mask:             0000ffffffffffff
[    0.211485] ... max period:             00007fffffffffff
[    0.211486] ... fixed-purpose events:   0
[    0.211487] ... event mask:             000000000000003f
[    0.213278] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.213355] x86: Booting SMP configuration:
[    0.213357] .... node  #0, CPUs:      #1 #2 #3 #4 #5
[    0.279415] x86: Booted up 1 node, 6 CPUs
[    0.279419] smpboot: Total of 6 processors activated (39599.41 BogoMIPS)
[    0.290329] devtmpfs: initialized
[    0.293540] EVM: security.selinux
[    0.293542] EVM: security.SMACK64
[    0.293543] EVM: security.ima
[    0.293544] EVM: security.capability
[    0.293605] PM: Registering ACPI NVS region [mem 0xcf001000-0xcf08bfff] (569344 bytes)
[    0.293617] PM: Registering ACPI NVS region [mem 0xcf2ae000-0xcf2aefff] (4096 bytes)
[    0.293619] PM: Registering ACPI NVS region [mem 0xcf2bf000-0xcf2c5fff] (28672 bytes)
[    0.293621] PM: Registering ACPI NVS region [mem 0xcf2ed000-0xcf4effff] (2109440 bytes)
[    0.294552] pinctrl core: initialized pinctrl subsystem
[    0.294612] regulator-dummy: no parameters
[    0.294636] RTC time: 11:40:44, date: 07/29/14
[    0.294672] NET: Registered protocol family 16
[    0.294789] cpuidle: using governor ladder
[    0.294791] cpuidle: using governor menu
[    0.294855] ACPI: bus type PCI registered
[    0.294857] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.294917] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.294920] PCI: not using MMCONFIG
[    0.294921] PCI: Using configuration type 1 for base access
[    0.294922] PCI: Using configuration type 1 for extended access
[    0.296138] bio: create slab <bio-0> at 0
[    0.296340] ACPI: Added _OSI(Module Device)
[    0.296341] ACPI: Added _OSI(Processor Device)
[    0.296343] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.296344] ACPI: Added _OSI(Processor Aggregator Device)
[    0.298536] ACPI: Executed 2 blocks of module-level executable AML code
[    0.303811] ACPI: Interpreter enabled
[    0.303821] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.303838] ACPI: (supports S0 S1 S3 S4 S5)
[    0.303839] ACPI: Using IOAPIC for interrupt routing
[    0.303991] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.304040] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.321802] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.321934] ACPI: No dock devices found.
[    0.379352] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.379365] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.379376] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.380638] PCI host bridge to bus 0000:00
[    0.380644] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.380649] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.380654] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.380658] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.380662] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.380667] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.380671] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.380675] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[    0.380698] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.380992] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.381056] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.381205] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.381272] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[    0.381333] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.381485] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.381546] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[    0.381607] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.381754] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.381816] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[    0.381877] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.382023] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.382088] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    0.382149] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.382298] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.382375] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.382398] pci 0000:00:11.0: reg 0x10: [io  0xf090-0xf097]
[    0.382411] pci 0000:00:11.0: reg 0x14: [io  0xf080-0xf083]
[    0.382423] pci 0000:00:11.0: reg 0x18: [io  0xf070-0xf077]
[    0.382435] pci 0000:00:11.0: reg 0x1c: [io  0xf060-0xf063]
[    0.382447] pci 0000:00:11.0: reg 0x20: [io  0xf050-0xf05f]
[    0.382460] pci 0000:00:11.0: reg 0x24: [mem 0xfe50b000-0xfe50b3ff]
[    0.382484] pci 0000:00:11.0: set SATA to AHCI mode
[    0.382709] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.382726] pci 0000:00:12.0: reg 0x10: [mem 0xfe50a000-0xfe50afff]
[    0.382934] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.383004] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.383027] pci 0000:00:12.2: reg 0x10: [mem 0xfe509000-0xfe5090ff]
[    0.383118] pci 0000:00:12.2: supports D1 D2
[    0.383122] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.383270] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.383351] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.383368] pci 0000:00:13.0: reg 0x10: [mem 0xfe508000-0xfe508fff]
[    0.383567] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.383636] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.383659] pci 0000:00:13.2: reg 0x10: [mem 0xfe507000-0xfe5070ff]
[    0.383753] pci 0000:00:13.2: supports D1 D2
[    0.383757] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.383895] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.383950] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.384154] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.384169] pci 0000:00:14.1: reg 0x10: [io  0xf040-0xf047]
[    0.384180] pci 0000:00:14.1: reg 0x14: [io  0xf030-0xf033]
[    0.384190] pci 0000:00:14.1: reg 0x18: [io  0xf020-0xf027]
[    0.384200] pci 0000:00:14.1: reg 0x1c: [io  0xf010-0xf013]
[    0.384211] pci 0000:00:14.1: reg 0x20: [io  0xf000-0xf00f]
[    0.384382] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.384404] pci 0000:00:14.2: reg 0x10: [mem 0xfe500000-0xfe503fff 64bit]
[    0.384470] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.384583] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.384633] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.384840] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.384981] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.385031] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.385049] pci 0000:00:14.5: reg 0x10: [mem 0xfe506000-0xfe506fff]
[    0.385200] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.385241] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.385253] pci 0000:00:16.0: reg 0x10: [mem 0xfe505000-0xfe505fff]
[    0.385383] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.385426] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.385443] pci 0000:00:16.2: reg 0x10: [mem 0xfe504000-0xfe5040ff]
[    0.385515] pci 0000:00:16.2: supports D1 D2
[    0.385517] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.385606] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.385649] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.385773] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.385891] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.386014] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.386138] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.386255] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.386445] pci 0000:01:00.0: [10de:1244] type 00 class 0x030000
[    0.386455] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
[    0.386466] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.386476] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref]
[    0.386483] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.386490] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[    0.386568] pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
[    0.386578] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[    0.391320] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.391324] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.391327] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
[    0.391331] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[    0.391335] pci 0000:00:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.391390] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.391403] pci 0000:03:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.391423] pci 0000:03:00.0: reg 0x18: [mem 0xfe400000-0xfe400fff 64bit]
[    0.391437] pci 0000:03:00.0: reg 0x20: [mem 0xdc100000-0xdc103fff 64bit pref]
[    0.391492] pci 0000:03:00.0: supports D1 D2
[    0.391494] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.399320] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.399329] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
[    0.399335] pci 0000:00:06.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.399342] pci 0000:00:06.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[    0.399434] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.399457] pci 0000:04:00.0: reg 0x10: [mem 0xfe300000-0xfe301fff 64bit]
[    0.399556] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.407311] pci 0000:00:07.0: PCI bridge to [bus 04]
[    0.407322] pci 0000:00:07.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.407431] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[    0.407468] pci 0000:05:00.0: reg 0x10: [mem 0xfe200000-0xfe201fff 64bit]
[    0.407645] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.415312] pci 0000:00:0a.0: PCI bridge to [bus 05]
[    0.415322] pci 0000:00:0a.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.415404] pci 0000:06:06.0: [1033:0035] type 00 class 0x0c0310
[    0.415429] pci 0000:06:06.0: reg 0x10: [mem 0xfe101000-0xfe101fff]
[    0.415532] pci 0000:06:06.0: supports D1 D2
[    0.415536] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot
[    0.415616] pci 0000:06:06.1: [1033:0035] type 00 class 0x0c0310
[    0.415641] pci 0000:06:06.1: reg 0x10: [mem 0xfe100000-0xfe100fff]
[    0.415743] pci 0000:06:06.1: supports D1 D2
[    0.415747] pci 0000:06:06.1: PME# supported from D0 D1 D2 D3hot
[    0.415838] pci 0000:06:06.2: [1033:00e0] type 00 class 0x0c0320
[    0.415863] pci 0000:06:06.2: reg 0x10: [mem 0xfe10a000-0xfe10a0ff]
[    0.415965] pci 0000:06:06.2: supports D1 D2
[    0.415969] pci 0000:06:06.2: PME# supported from D0 D1 D2 D3hot
[    0.416085] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
[    0.416094] pci 0000:00:14.4:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.416101] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.416105] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.416109] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.416113] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.416117] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.416121] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.416125] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    0.624977] pci 0000:00:05.0: PCI bridge to [bus 07-ff]
[    0.624985] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
[    0.624993] pci 0000:00:05.0:   bridge window [mem 0xdc200000-0xdc2fffff 64bit pref]
[    0.624998] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[    0.643424] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.643602] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.643779] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.643955] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.644101] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.644220] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.644339] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.644457] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.644756] ACPI: \_SB_.PCI0: notify handler is installed
[    0.644856] Found 1 acpi root devices
[    0.645098] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.645105] vgaarb: loaded
[    0.645108] vgaarb: bridge control possible 0000:01:00.0
[    0.645508] SCSI subsystem initialized
[    0.645622] libata version 3.00 loaded.
[    0.645666] ACPI: bus type USB registered
[    0.645705] usbcore: registered new interface driver usbfs
[    0.645723] usbcore: registered new interface driver hub
[    0.645781] usbcore: registered new device driver usb
[    0.646049] PCI: Using ACPI for IRQ routing
[    0.653330] PCI: pci_cache_line_size set to 64 bytes
[    0.653398] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.653400] e820: reserve RAM buffer [mem 0xcf001000-0xcfffffff]
[    0.653402] e820: reserve RAM buffer [mem 0xcf77a000-0xcfffffff]
[    0.653403] e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
[    0.653405] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[    0.653482] NetLabel: Initializing
[    0.653483] NetLabel:  domain hash size = 128
[    0.653484] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.653497] NetLabel:  unlabeled traffic allowed by default
[    0.653551] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.653554] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.655624] Switched to clocksource hpet
[    0.661718] AppArmor: AppArmor Filesystem Enabled
[    0.661734] pnp: PnP ACPI init
[    0.661745] ACPI: bus type PNP registered
[    0.661835] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.661839] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.662162] system 00:01: [io  0x040b] has been reserved
[    0.662165] system 00:01: [io  0x04d6] has been reserved
[    0.662167] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.662169] system 00:01: [io  0x0c14] has been reserved
[    0.662171] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.662173] system 00:01: [io  0x0c52] has been reserved
[    0.662175] system 00:01: [io  0x0c6c] has been reserved
[    0.662177] system 00:01: [io  0x0c6f] has been reserved
[    0.662180] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.662182] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.662184] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.662186] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.662188] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.662190] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.662192] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.662194] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.662196] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.662198] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.662200] system 00:01: [io  0x0485-0x0486] has been reserved
[    0.662203] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.662205] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.662208] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.662210] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.662212] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.662214] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.662216] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[    0.662219] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.662399] system 00:02: [io  0x0a00-0x0a0f] has been reserved
[    0.662402] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.662465] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.662628] pnp 00:04: [dma 0 disabled]
[    0.662673] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.662685] pnp 00:05: [dma 4]
[    0.662706] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.662733] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.662754] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.662815] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.662818] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.662842] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.662881] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.662927] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.663082] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.663218] system 00:0d: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.663221] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.663383] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.663387] pnp: PnP ACPI: found 15 devices
[    0.663388] ACPI: bus type PNP unregistered
[    0.669950] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.669953] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.669957] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
[    0.669960] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[    0.669963] pci 0000:00:05.0: PCI bridge to [bus 07]
[    0.669965] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
[    0.669969] pci 0000:00:05.0:   bridge window [mem 0xdc200000-0xdc2fffff 64bit pref]
[    0.669972] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.669975] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
[    0.669977] pci 0000:00:06.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.669980] pci 0000:00:06.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[    0.669983] pci 0000:00:07.0: PCI bridge to [bus 04]
[    0.669986] pci 0000:00:07.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.669990] pci 0000:00:0a.0: PCI bridge to [bus 05]
[    0.669993] pci 0000:00:0a.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.669997] pci 0000:00:14.4: PCI bridge to [bus 06]
[    0.670001] pci 0000:00:14.4:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.670008] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.670010] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.670012] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.670014] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.670016] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.670017] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.670019] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[    0.670021] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.670023] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
[    0.670025] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
[    0.670027] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.670028] pci_bus 0000:07: resource 2 [mem 0xdc200000-0xdc2fffff 64bit pref]
[    0.670030] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.670032] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.670034] pci_bus 0000:03: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
[    0.670036] pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.670037] pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.670039] pci_bus 0000:06: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.670041] pci_bus 0000:06: resource 4 [io  0x0000-0x03af]
[    0.670043] pci_bus 0000:06: resource 5 [io  0x03e0-0x0cf7]
[    0.670045] pci_bus 0000:06: resource 6 [io  0x03b0-0x03df]
[    0.670046] pci_bus 0000:06: resource 7 [io  0x0d00-0xffff]
[    0.670048] pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
[    0.670050] pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
[    0.670051] pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff]
[    0.670081] NET: Registered protocol family 2
[    0.670269] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.670526] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.670735] TCP: Hash tables configured (established 65536 bind 65536)
[    0.670765] TCP: reno registered
[    0.670779] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.670821] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.670906] NET: Registered protocol family 1
[    1.003847] pci 0000:01:00.0: Boot video device
[    1.004787] pci 0000:06:06.2: EHCI: unrecognized capability 00
[    1.004845] PCI: CLS 64 bytes, default 64
[    1.004969] Trying to unpack rootfs image as initramfs...
[    1.483898] Freeing initrd memory: 27216K (ffff880034ac8000 - ffff88003655c000)
[    1.484255] PCI-DMA: Disabling AGP.
[    1.484329] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.484331] PCI-DMA: using GART IOMMU.
[    1.484333] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.489423] perf: AMD NB counters detected
[    1.489450] LVT offset 0 assigned for vector 0x400
[    1.489478] perf: AMD IBS detected (0x000000ff)
[    1.489519] microcode: CPU0: patch_level=0x06000609
[    1.489525] microcode: CPU1: patch_level=0x06000609
[    1.489536] microcode: CPU2: patch_level=0x06000609
[    1.489545] microcode: CPU3: patch_level=0x06000609
[    1.489554] microcode: CPU4: patch_level=0x06000609
[    1.489562] microcode: CPU5: patch_level=0x06000609
[    1.489618] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.489621] Scanning for low memory corruption every 60 seconds
[    1.489925] Initialise system trusted keyring
[    1.489967] audit: initializing netlink socket (disabled)
[    1.489976] type=2000 audit(1406634045.132:1): initialized
[    1.514674] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.516278] zbud: loaded
[    1.516428] VFS: Disk quotas dquot_6.5.2
[    1.516476] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.517002] fuse init (API version 7.22)
[    1.517081] msgmni has been set to 15905
[    1.517138] Key type big_key registered
[    1.517660] Key type asymmetric registered
[    1.517662] Asymmetric key parser 'x509' registered
[    1.517694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.517745] io scheduler noop registered
[    1.517746] io scheduler deadline registered (default)
[    1.517773] io scheduler cfq registered
[    1.518210] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.518227] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.518276] ipmi message handler version 39.2
[    1.518335] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.518339] ACPI: Power Button [PWRB]
[    1.518371] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.518373] ACPI: Power Button [PWRF]
[    1.518423] ACPI: acpi_idle registered with cpuidle
[    1.518940] GHES: HEST is not enabled!
[    1.519037] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.539384] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.540908] Linux agpgart interface v0.103
[    1.542315] brd: module loaded
[    1.543123] loop: module loaded
[    1.543507] libphy: Fixed MDIO Bus: probed
[    1.543597] tun: Universal TUN/TAP device driver, 1.6
[    1.543599] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.543667] PPP generic driver version 2.4.2
[    1.543712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.543716] ehci-pci: EHCI PCI platform driver
[    1.543822] QUIRK: Enable AMD PLL fix
[    1.543842] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.543847] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.543852] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.543860] ehci-pci 0000:00:12.2: debug port 1
[    1.543897] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe509000
[    1.554886] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.554984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.554986] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.554988] usb usb1: Product: EHCI Host Controller
[    1.554990] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.554991] usb usb1: SerialNumber: 0000:00:12.2
[    1.555087] hub 1-0:1.0: USB hub found
[    1.555094] hub 1-0:1.0: 5 ports detected
[    1.555293] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.555297] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.555300] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.555308] ehci-pci 0000:00:13.2: debug port 1
[    1.555331] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe507000
[    1.566853] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.566892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.566894] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.566896] usb usb2: Product: EHCI Host Controller
[    1.566897] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.566898] usb usb2: SerialNumber: 0000:00:13.2
[    1.567015] hub 2-0:1.0: USB hub found
[    1.567028] hub 2-0:1.0: 5 ports detected
[    1.567223] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.567227] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.567230] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.567238] ehci-pci 0000:00:16.2: debug port 1
[    1.567262] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe504000
[    1.578845] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.578884] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.578886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.578888] usb usb3: Product: EHCI Host Controller
[    1.578889] usb usb3: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.578890] usb usb3: SerialNumber: 0000:00:16.2
[    1.579008] hub 3-0:1.0: USB hub found
[    1.579021] hub 3-0:1.0: 4 ports detected
[    1.579174] ehci-pci 0000:06:06.2: EHCI Host Controller
[    1.579178] ehci-pci 0000:06:06.2: new USB bus registered, assigned bus number 4
[    1.579204] ehci-pci 0000:06:06.2: can't setup: -19
[    1.579206] ehci-pci 0000:06:06.2: USB bus 4 deregistered
[    1.579239] ehci-pci 0000:06:06.2: init 0000:06:06.2 fail, -19
[    1.579248] ehci-platform: EHCI generic platform driver
[    1.579256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.579257] ohci-pci: OHCI PCI platform driver
[    1.579333] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.579337] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.579355] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe50a000
[    1.638796] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.638799] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.638800] usb usb4: Product: OHCI PCI host controller
[    1.638802] usb usb4: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.638803] usb usb4: SerialNumber: 0000:00:12.0
[    1.638924] hub 4-0:1.0: USB hub found
[    1.638937] hub 4-0:1.0: 5 ports detected
[    1.639119] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.639123] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.639134] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe508000
[    1.698741] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.698744] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.698746] usb usb5: Product: OHCI PCI host controller
[    1.698747] usb usb5: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.698748] usb usb5: SerialNumber: 0000:00:13.0
[    1.698867] hub 5-0:1.0: USB hub found
[    1.698882] hub 5-0:1.0: 5 ports detected
[    1.699064] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.699068] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.699080] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe506000
[    1.758706] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.758709] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.758711] usb usb6: Product: OHCI PCI host controller
[    1.758712] usb usb6: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.758714] usb usb6: SerialNumber: 0000:00:14.5
[    1.758920] hub 6-0:1.0: USB hub found
[    1.758928] hub 6-0:1.0: 2 ports detected
[    1.759089] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.759094] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.759108] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe505000
[    1.818562] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.818564] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.818566] usb usb7: Product: OHCI PCI host controller
[    1.818567] usb usb7: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.818568] usb usb7: SerialNumber: 0000:00:16.0
[    1.818762] hub 7-0:1.0: USB hub found
[    1.818771] hub 7-0:1.0: 4 ports detected
[    1.818906] ohci-pci 0000:06:06.0: OHCI PCI host controller
[    1.818911] ohci-pci 0000:06:06.0: new USB bus registered, assigned bus number 8
[    1.818930] ohci-pci 0000:06:06.0: irq 22, io mem 0xfe101000
[    1.904354] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.904356] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.904358] usb usb8: Product: OHCI PCI host controller
[    1.904360] usb usb8: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.904361] usb usb8: SerialNumber: 0000:06:06.0
[    1.904546] hub 8-0:1.0: USB hub found
[    1.904555] hub 8-0:1.0: 3 ports detected
[    1.904691] ohci-pci 0000:06:06.1: OHCI PCI host controller
[    1.904696] ohci-pci 0000:06:06.1: new USB bus registered, assigned bus number 9
[    1.904714] ohci-pci 0000:06:06.1: irq 23, io mem 0xfe100000
[    1.988268] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    1.988271] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.988273] usb usb9: Product: OHCI PCI host controller
[    1.988274] usb usb9: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.988275] usb usb9: SerialNumber: 0000:06:06.1
[    1.988460] hub 9-0:1.0: USB hub found
[    1.988471] hub 9-0:1.0: 2 ports detected
[    1.988550] ohci-platform: OHCI generic platform driver
[    1.988557] uhci_hcd: USB Universal Host Controller Interface driver
[    1.988623] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.988627] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[    1.988758] xhci_hcd 0000:04:00.0: irq 72 for MSI/MSI-X
[    1.988765] xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
[    1.988771] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
[    1.988777] xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
[    1.988783] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
[    1.988789] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
[    1.988795] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
[    1.988905] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    1.988907] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.988908] usb usb10: Product: xHCI Host Controller
[    1.988910] usb usb10: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    1.988911] usb usb10: SerialNumber: 0000:04:00.0
[    1.989003] hub 10-0:1.0: USB hub found
[    1.989011] hub 10-0:1.0: 2 ports detected
[    1.989076] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.989079] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[    1.992226] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    1.992231] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.992232] usb usb11: Product: xHCI Host Controller
[    1.992234] usb usb11: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    1.992235] usb usb11: SerialNumber: 0000:04:00.0
[    1.992437] hub 11-0:1.0: USB hub found
[    1.992445] hub 11-0:1.0: 2 ports detected
[    2.002718] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.002723] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 12
[    2.008015] xhci_hcd 0000:05:00.0: irq 79 for MSI/MSI-X
[    2.008021] xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
[    2.008027] xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
[    2.008032] xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
[    2.008038] xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
[    2.008043] xhci_hcd 0000:05:00.0: irq 84 for MSI/MSI-X
[    2.008048] xhci_hcd 0000:05:00.0: irq 85 for MSI/MSI-X
[    2.008165] usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
[    2.008167] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.008168] usb usb12: Product: xHCI Host Controller
[    2.008169] usb usb12: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    2.008171] usb usb12: SerialNumber: 0000:05:00.0
[    2.008339] hub 12-0:1.0: USB hub found
[    2.008347] hub 12-0:1.0: 2 ports detected
[    2.008411] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.008413] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 13
[    2.011460] usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
[    2.011462] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.011463] usb usb13: Product: xHCI Host Controller
[    2.011464] usb usb13: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    2.011466] usb usb13: SerialNumber: 0000:05:00.0
[    2.011772] hub 13-0:1.0: USB hub found
[    2.011784] hub 13-0:1.0: 2 ports detected
[    2.022735] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.023092] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.023098] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.023226] mousedev: PS/2 mouse device common for all mice
[    2.023356] rtc_cmos 00:06: RTC can wake from S4
[    2.023453] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.023471] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.023535] device-mapper: uevent: version 1.0.3
[    2.023594] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.023600] ledtrig-cpu: registered to indicate activity on CPUs
[    2.023691] TCP: cubic registered
[    2.023774] NET: Registered protocol family 10
[    2.023934] NET: Registered protocol family 17
[    2.023941] Key type dns_resolver registered
[    2.024345] Loading compiled-in X.509 certificates
[    2.025218] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
[    2.025231] registered taskstats version 1
[    2.028272] Key type trusted registered
[    2.030766] Key type encrypted registered
[    2.033075] AppArmor: AppArmor sha1 policy hashing enabled
[    2.033078] IMA: No TPM chip found, activating TPM-bypass!
[    2.033707] regulator-dummy: disabling
[    2.033889]   Magic number: 6:484:682
[    2.033959] rtc_cmos 00:06: setting system clock to 2014-07-29 11:40:46 UTC (1406634046)
[    2.034081] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.034347] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.034349] EDD information not available.
[    2.034398] PM: Hibernation image not present or could not be loaded.
[    2.035642] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    2.035643] Write protecting the kernel read-only data: 12288k
[    2.038601] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
[    2.040999] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
[    2.057766] systemd-udevd[136]: starting version 204
[    2.081194] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.081205] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.081407] r8169 0000:03:00.0: irq 86 for MSI/MSI-X
[    2.081544] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90000c5c000, e8:94:f6:08:5d:25, XID 0c200000 IRQ 86
[    2.081546] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.083088] scsi0 : pata_atiixp
[    2.083817] scsi1 : pata_atiixp
[    2.083891] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    2.083893] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    2.083917] ahci 0000:00:11.0: version 3.0
[    2.084087] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    2.084092] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.085040] scsi2 : ahci
[    2.085275] scsi3 : ahci
[    2.085390] scsi4 : ahci
[    2.085486] scsi5 : ahci
[    2.085530] ata3: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b100 irq 19
[    2.085533] ata4: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b180 irq 19
[    2.085535] ata5: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b200 irq 19
[    2.085537] ata6: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b280 irq 19
[    2.254687] ata1.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
[    2.254690] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.254912] ata1.01: HPA detected: current 976771055, native 976773168
[    2.254916] ata1.01: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133
[    2.254918] ata1.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.254922] ata1.00: limited to UDMA/33 due to 40-wire cable
[    2.254923] ata1.01: limited to UDMA/33 due to 40-wire cable
[    2.262777] ata1.00: configured for UDMA/33
[    2.278219] usb 4-4: new full-speed USB device number 2 using ohci-pci
[    2.278627] ata1.01: configured for UDMA/33
[    2.278879] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
[    2.279024] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.279032] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.279133] sd 0:0:0:0: [sda] Write Protect is off
[    2.279136] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.279186] scsi 0:0:1:0: Direct-Access     ATA      WDC WD5001AALS-0 01.0 PQ: 0 ANSI: 5
[    2.279195] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.279361] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.279364] sd 0:0:1:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[    2.279460] sd 0:0:1:0: [sdb] Write Protect is off
[    2.279463] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.279485] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.289829]  sda: sda1
[    2.297676] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.324851] Alternate GPT is invalid, using primary GPT.
[    2.324862]  sdb: sdb1
[    2.325074] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.402119] ata5: SATA link down (SStatus 0 SControl 300)
[    2.451169] usb 4-4: New USB device found, idVendor=046d, idProduct=c52b
[    2.451177] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.451182] usb 4-4: Product: USB Receiver
[    2.451185] usb 4-4: Manufacturer: Logitech
[    2.458467] hidraw: raw HID events driver (C) Jiri Kosina
[    2.472269] usbcore: registered new interface driver usbhid
[    2.472274] usbhid: USB HID core driver
[    2.478184] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-4/input2
[    2.483493] input: Logitech Unifying Device. Wireless PID:101d as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.2/0003:046D:C52B.0003/input/input5
[    2.483700] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on usb-0000:00:12.0-4:1
[    2.485330] input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.2/0003:046D:C52B.0003/input/input6
[    2.485457] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:12.0-4:2
[    2.485934] tsc: Refined TSC clocksource calibration: 3300.133 MHz
[    2.487447] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.2/0003:046D:C52B.0003/input/input7
[    2.487642] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:12.0-4:3
[    2.573941] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.576741] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    2.577563] ata4.00: configured for UDMA/100
[    2.577917] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.577935] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.583065] ata6.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
[    2.583073] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.588082] ata6.00: configured for UDMA/133
[    2.617905] usb 8-1: new full-speed USB device number 2 using ohci-pci
[    2.631841] ata3.00: HPA detected: current 234439535, native 234441648
[    2.654502] ata3.00: ATA-8: Corsair Force GT, 1.3.2, max UDMA/133
[    2.654509] ata3.00: 234439535 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.731114] ata3.00: configured for UDMA/133
[    2.731514] scsi 2:0:0:0: Direct-Access     ATA      Corsair Force GT 1.3. PQ: 0 ANSI: 5
[    2.731628] sd 2:0:0:0: [sdc] 234439535 512-byte logical blocks: (120 GB/111 GiB)
[    2.731668] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.731678] sd 2:0:0:0: [sdc] Write Protect is off
[    2.731680] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.731695] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.732355]  sdc: sdc1 sdc2 < sdc5 >
[    2.732642] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.735031] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.738512] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.738518] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.738848] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.739010] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    2.739217] scsi 5:0:0:0: Direct-Access     ATA      WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
[    2.739352] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    2.739360] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.739473] sd 5:0:0:0: [sdd] Write Protect is off
[    2.739475] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.739516] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.775722]  sdd: sdd1
[    2.776063] sd 5:0:0:0: [sdd] Attached SCSI disk
[    3.485290] Switched to clocksource tsc
[    4.057646] EXT4-fs (sdc1): INFO: recovery required on readonly filesystem
[    4.057649] EXT4-fs (sdc1): write access will be enabled during recovery
[    4.086703] random: nonblocking pool is initialized
[    4.119211] EXT4-fs (sdc1): recovery complete
[    4.119752] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    5.236382] Adding 8281472k swap on /dev/sdc5.  Priority:-1 extents:1 across:8281472k SSFS
[    5.249219] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.289729] systemd-udevd[384]: starting version 204
[    5.294821] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[    5.327685] lp: driver loaded but no devices found
[    5.340006] wmi: Mapper loaded
[    5.347263] ppdev: user-space parallel port driver
[    5.354481] [drm] Initialized drm 1.1.0 20060810
[    5.370885] nvidia: module license 'NVIDIA' taints kernel.
[    5.370890] Disabling lock debugging due to kernel taint
[    5.378233] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[    5.388896] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[    5.389244] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[    5.389254] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.38  Wed Jan  8 19:32:30 PST 2014
[    5.401435] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    5.401499] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    5.402885] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    5.402938] sp5100_tco: PCI Revision ID: 0x42
[    5.402969] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    5.402979] sp5100_tco: Last reboot was not triggered by watchdog.
[    5.403046] sp5100_tco: initialized (0xffffc90010e68b00). heartbeat=60 sec (nowayout=0)
[    5.422323] hda-intel 0000:00:14.2: Using LPIB position fix
[    5.423732] MCE: In-kernel MCE decoding enabled.
[    5.425942] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[    5.426032] EDAC MC: Ver: 3.0.0
[    5.428907] AMD64 EDAC driver v3.4.0
[    5.440463] SKU: Nid=0x1d sku_cfg=0x4007f603
[    5.440465] SKU: port_connectivity=0x1
[    5.440467] SKU: enable_pcbeep=0x0
[    5.440468] SKU: check_sum=0x00000007
[    5.440470] SKU: customization=0x000000f6
[    5.440471] SKU: external_amp=0x0
[    5.440552] SKU: platform_type=0x0
[    5.440553] SKU: swap=0x1
[    5.440555] SKU: override=0x1
[    5.441096] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.441098]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.441100]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.441102]    mono: mono_out=0x0
[    5.441103]    dig-out=0x11/0x1e
[    5.441104]    inputs:
[    5.441106]      Front Mic=0x19
[    5.441108]      Rear Mic=0x18
[    5.441110]      Line=0x1a
[    5.441112] realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
[    5.441113] realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0892
[    5.457471] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    5.457548] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    5.457619] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    5.457700] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    5.457780] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    5.457885] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    5.457960] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    5.458042] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    5.458336] EDAC amd64: DRAM ECC disabled.
[    5.458346] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    5.458346]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    5.458346]  (Note that use of the override may cause unknown side effects.)
[    5.458678] hda_intel: Disabling MSI
[    5.458687] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    5.458722] hda-intel 0000:01:00.1: Disabling 64bit DMA
[    5.464380] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[    5.480095] type=1400 audit(1406634049.944:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=573 comm="apparmor_parser"
[    5.480103] type=1400 audit(1406634049.944:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
[    5.480109] type=1400 audit(1406634049.944:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
[    5.480743] type=1400 audit(1406634049.944:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
[    5.480751] type=1400 audit(1406634049.944:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
[    5.481089] type=1400 audit(1406634049.944:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
[    5.498186] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    5.502613] kvm: Nested Virtualization enabled
[    5.502620] kvm: Nested Paging enabled
[    5.551994] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[    5.709827] Bluetooth: Core ver 2.17
[    5.709852] NET: Registered protocol family 31
[    5.709854] Bluetooth: HCI device and connection manager initialized
[    5.709863] Bluetooth: HCI socket layer initialized
[    5.709866] Bluetooth: L2CAP socket layer initialized
[    5.709871] Bluetooth: SCO socket layer initialized
[    5.714840] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.714843] Bluetooth: BNEP filters: protocol multicast
[    5.714850] Bluetooth: BNEP socket layer initialized
[    5.718571] Bluetooth: RFCOMM TTY layer initialized
[    5.718578] Bluetooth: RFCOMM socket layer initialized
[    5.718585] Bluetooth: RFCOMM ver 1.11
[    5.732550] type=1400 audit(1406634050.196:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=770 comm="apparmor_parser"
[    5.732557] type=1400 audit(1406634050.196:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=770 comm="apparmor_parser"
[    5.733145] type=1400 audit(1406634050.196:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=770 comm="apparmor_parser"
[    5.785231] init: cups main process (776) killed by HUP signal
[    5.785244] init: cups main process ended, respawning
[    5.878380] init: failsafe main process (805) killed by TERM signal
[    5.927755] init: samba-ad-dc main process (846) terminated with status 1
[    6.130427] r8169 0000:03:00.0 eth0: link down
[    6.130436] r8169 0000:03:00.0 eth0: link down
[    6.130469] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.130770] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.278627] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
[    6.278853] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
[    6.278921] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[    6.278989] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[    6.524037] vboxdrv: Found 6 processor cores.
[    6.524298] vboxdrv: fAsync=0 offMin=0x2d7 offMax=0x31b3
[    6.524388] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    6.524390] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[    6.547431] vboxpci: IOMMU not found (not registered)
[    6.558222] audit_printk_skb: 150 callbacks suppressed
[    6.558227] type=1400 audit(1406634051.024:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1223 comm="apparmor_parser"
[    6.603903] nvidia 0000:01:00.0: irq 87 for MSI/MSI-X
[    7.571914] init: plymouth-upstart-bridge main process ended, respawning
[    7.578437] init: plymouth-upstart-bridge main process (1332) terminated with status 1
[    7.578450] init: plymouth-upstart-bridge main process ended, respawning
[    7.614768] ohci-pci 0000:06:06.0: OHCI Unrecoverable Error, scheduling NEC chip restart
[    7.617860] r8169 0000:03:00.0 eth0: link up
[    7.617869] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.691246] init: udev-fallback-graphics main process (1381) terminated with status 1
[    7.960818] usb 8-1: new full-speed USB device number 3 using ohci-pci
[   23.118999] usb 8-1: device descriptor read/64, error -110
[   28.216005] ohci-pci 0000:06:06.0: HC died; cleaning up
[   28.602162] irq 22: nobody cared (try booting with the "irqpoll" option)
[   28.602165] CPU: 3 PID: 0 Comm: swapper/3 Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[   28.602167] Hardware name: MSI MS-7640/990FXA-GD65 (MS-7640), BIOS V19.5 11/28/2011
[   28.602168]  ffff880222dcaa9c ffff88022ecc3e68 ffffffff8171bcb4 ffff880222dcaa00
[   28.602172]  ffff88022ecc3e90 ffffffff810c1ac2 ffff880222dcaa00 0000000000000016
[   28.602174]  0000000000000000 ffff88022ecc3ed0 ffffffff810c1f5c 000000002ecc3eb0
[   28.602176] Call Trace:
[   28.602178]  <IRQ>  [<ffffffff8171bcb4>] dump_stack+0x45/0x56
[   28.602187]  [<ffffffff810c1ac2>] __report_bad_irq+0x32/0xd0
[   28.602189]  [<ffffffff810c1f5c>] note_interrupt+0x1ac/0x200
[   28.602192]  [<ffffffff810bf829>] handle_irq_event_percpu+0xd9/0x1d0
[   28.602194]  [<ffffffff810bf95d>] handle_irq_event+0x3d/0x60
[   28.602196]  [<ffffffff810c2ada>] handle_fasteoi_irq+0x5a/0x100
[   28.602199]  [<ffffffff81015cde>] handle_irq+0x1e/0x30
[   28.602202]  [<ffffffff8172e98d>] do_IRQ+0x4d/0xc0
[   28.602205]  [<ffffffff8172412d>] common_interrupt+0x6d/0x6d
[   28.602206]  <EOI>  [<ffffffff815ceaff>] ? cpuidle_enter_state+0x4f/0xc0
[   28.602211]  [<ffffffff815cec29>] cpuidle_idle_call+0xb9/0x1f0
[   28.602214]  [<ffffffff8101cebe>] arch_cpu_idle+0xe/0x30
[   28.602216]  [<ffffffff810bec65>] cpu_startup_entry+0xc5/0x290
[   28.602219]  [<ffffffff81040fd8>] start_secondary+0x218/0x2c0
[   28.602221] handlers:
[   28.602223] [<ffffffff8153e240>] usb_hcd_irq
[   28.602224] Disabling IRQ #22
[   35.787595] type=1400 audit(1406634080.290:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2538 comm="apparmor_parser"
[   35.787602] type=1400 audit(1406634080.290:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2538 comm="apparmor_parser"
[   35.788096] type=1400 audit(1406634080.290:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2538 comm="apparmor_parser"
[  241.173387] INFO: task khubd:61 blocked for more than 120 seconds.
[  241.173394]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  241.173398] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  241.173401] khubd           D ffff88022ed14440     0    61      2 0x00000000
[  241.173409]  ffff880222dc1bb8 0000000000000002 ffff880222db8000 ffff880222dc1fd8
[  241.173417]  0000000000014440 0000000000014440 ffff880222db8000 ffff88021e9cdd80
[  241.173424]  0000000000000000 ffff880222dc1c28 ffff880222dc1c9c 0000000000001388
[  241.173431] Call Trace:
[  241.173444]  [<ffffffff817200d9>] schedule+0x29/0x70
[  241.173453]  [<ffffffff815424b5>] usb_kill_urb+0x65/0xa0
[  241.173461]  [<ffffffff810aaf00>] ? prepare_to_wait_event+0x100/0x100
[  241.173468]  [<ffffffff81542c98>] usb_start_wait_urb+0xc8/0x150
[  241.173476]  [<ffffffff81542de5>] usb_control_msg+0xc5/0x110
[  241.173482]  [<ffffffff8153a67b>] ? hub_port_init+0x46b/0xb10
[  241.173489]  [<ffffffff8153a6c8>] hub_port_init+0x4b8/0xb10
[  241.173496]  [<ffffffff8153baa5>] hub_port_connect_change+0x185/0xb50
[  241.173502]  [<ffffffff81542df4>] ? usb_control_msg+0xd4/0x110
[  241.173509]  [<ffffffff8153c934>] hub_events+0x4c4/0xa20
[  241.173516]  [<ffffffff8153cec5>] hub_thread+0x35/0x160
[  241.173523]  [<ffffffff810aaf00>] ? prepare_to_wait_event+0x100/0x100
[  241.173529]  [<ffffffff8153ce90>] ? hub_events+0xa20/0xa20
[  241.173535]  [<ffffffff8108b3d2>] kthread+0xd2/0xf0
[  241.173541]  [<ffffffff8108b300>] ? kthread_create_on_node+0x1d0/0x1d0
[  241.173549]  [<ffffffff8172c5bc>] ret_from_fork+0x7c/0xb0
[  241.173555]  [<ffffffff8108b300>] ? kthread_create_on_node+0x1d0/0x1d0
[  241.173579] INFO: task upowerd:1451 blocked for more than 120 seconds.
[  241.173582]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  241.173585] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  241.173587] upowerd         D ffff88022ed54440     0  1451      1 0x00000000
[  241.173593]  ffff88021e287dd0 0000000000000002 ffff8802202eafe0 ffff88021e287fd8
[  241.173600]  0000000000014440 0000000000014440 ffff8802202eafe0 ffff88022337c8e8
[  241.173606]  ffff88022337c8ec ffff8802202eafe0 00000000ffffffff ffff88022337c8f0
[  241.173612] Call Trace:
[  241.173620]  [<ffffffff817205f9>] schedule_preempt_disabled+0x29/0x70
[  241.173627]  [<ffffffff81722465>] __mutex_lock_slowpath+0x135/0x1b0
[  241.173633]  [<ffffffff817224ff>] mutex_lock+0x1f/0x2f
[  241.173640]  [<ffffffff8154a5e9>] read_descriptors+0x39/0x110
[  241.173646]  [<ffffffff8123298b>] ? sysfs_bin_read+0x8b/0x1d0
[  241.173651]  [<ffffffff812329de>] sysfs_bin_read+0xde/0x1d0
[  241.173658]  [<ffffffff811bc9e5>] vfs_read+0x95/0x160
[  241.173664]  [<ffffffff811bd4f9>] SyS_read+0x49/0xa0
[  241.173671]  [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[  361.001265] INFO: task khubd:61 blocked for more than 120 seconds.
[  361.001272]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  361.001276] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  361.001279] khubd           D ffff88022ed14440     0    61      2 0x00000000
[  361.001287]  ffff880222dc1bb8 0000000000000002 ffff880222db8000 ffff880222dc1fd8
[  361.001295]  0000000000014440 0000000000014440 ffff880222db8000 ffff88021e9cdd80
[  361.001301]  0000000000000000 ffff880222dc1c28 ffff880222dc1c9c 0000000000001388
[  361.001308] Call Trace:
[  361.001321]  [<ffffffff817200d9>] schedule+0x29/0x70
[  361.001330]  [<ffffffff815424b5>] usb_kill_urb+0x65/0xa0
[  361.001338]  [<ffffffff810aaf00>] ? prepare_to_wait_event+0x100/0x100
[  361.001346]  [<ffffffff81542c98>] usb_start_wait_urb+0xc8/0x150
[  361.001353]  [<ffffffff81542de5>] usb_control_msg+0xc5/0x110
[  361.001360]  [<ffffffff8153a67b>] ? hub_port_init+0x46b/0xb10
[  361.001366]  [<ffffffff8153a6c8>] hub_port_init+0x4b8/0xb10
[  361.001373]  [<ffffffff8153baa5>] hub_port_connect_change+0x185/0xb50
[  361.001379]  [<ffffffff81542df4>] ? usb_control_msg+0xd4/0x110
[  361.001386]  [<ffffffff8153c934>] hub_events+0x4c4/0xa20
[  361.001393]  [<ffffffff8153cec5>] hub_thread+0x35/0x160
[  361.001400]  [<ffffffff810aaf00>] ? prepare_to_wait_event+0x100/0x100
[  361.001406]  [<ffffffff8153ce90>] ? hub_events+0xa20/0xa20
[  361.001412]  [<ffffffff8108b3d2>] kthread+0xd2/0xf0
[  361.001418]  [<ffffffff8108b300>] ? kthread_create_on_node+0x1d0/0x1d0
[  361.001425]  [<ffffffff8172c5bc>] ret_from_fork+0x7c/0xb0
[  361.001431]  [<ffffffff8108b300>] ? kthread_create_on_node+0x1d0/0x1d0
[  361.001453] INFO: task upowerd:1451 blocked for more than 120 seconds.
[  361.001457]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  361.001459] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  361.001462] upowerd         D ffff88022ed54440     0  1451      1 0x00000000
[  361.001468]  ffff88021e287dd0 0000000000000002 ffff8802202eafe0 ffff88021e287fd8
[  361.001474]  0000000000014440 0000000000014440 ffff8802202eafe0 ffff88022337c8e8
[  361.001480]  ffff88022337c8ec ffff8802202eafe0 00000000ffffffff ffff88022337c8f0
[  361.001486] Call Trace:
[  361.001494]  [<ffffffff817205f9>] schedule_preempt_disabled+0x29/0x70
[  361.001501]  [<ffffffff81722465>] __mutex_lock_slowpath+0x135/0x1b0
[  361.001508]  [<ffffffff817224ff>] mutex_lock+0x1f/0x2f
[  361.001514]  [<ffffffff8154a5e9>] read_descriptors+0x39/0x110
[  361.001520]  [<ffffffff8123298b>] ? sysfs_bin_read+0x8b/0x1d0
[  361.001525]  [<ffffffff812329de>] sysfs_bin_read+0xde/0x1d0
[  361.001532]  [<ffffffff811bc9e5>] vfs_read+0x95/0x160
[  361.001538]  [<ffffffff811bd4f9>] SyS_read+0x49/0xa0
[  361.001545]  [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[  361.001598] INFO: task lsusb:2785 blocked for more than 120 seconds.
[  361.001601]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  361.001603] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  361.001605] lsusb           D ffff88022ed14440     0  2785   1771 0x00000004
[  361.001611]  ffff88021d7f1dd0 0000000000000002 ffff8802018f0000 ffff88021d7f1fd8
[  361.001617]  0000000000014440 0000000000014440 ffff8802018f0000 ffff88022337c8e8
[  361.001623]  ffff88022337c8ec ffff8802018f0000 00000000ffffffff ffff88022337c8f0
[  361.001629] Call Trace:
[  361.001637]  [<ffffffff817205f9>] schedule_preempt_disabled+0x29/0x70
[  361.001643]  [<ffffffff81722465>] __mutex_lock_slowpath+0x135/0x1b0
[  361.001650]  [<ffffffff817224ff>] mutex_lock+0x1f/0x2f
[  361.001656]  [<ffffffff8154a5e9>] read_descriptors+0x39/0x110
[  361.001661]  [<ffffffff8123298b>] ? sysfs_bin_read+0x8b/0x1d0
[  361.001666]  [<ffffffff812329de>] sysfs_bin_read+0xde/0x1d0
[  361.001672]  [<ffffffff811bc9e5>] vfs_read+0x95/0x160
[  361.001678]  [<ffffffff811bd4f9>] SyS_read+0x49/0xa0
[  361.001685]  [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[  480.828845] INFO: task khubd:61 blocked for more than 120 seconds.
[  480.828852]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  480.828856] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  480.828859] khubd           D ffff88022ed14440     0    61      2 0x00000000
[  480.828867]  ffff880222dc1bb8 0000000000000002 ffff880222db8000 ffff880222dc1fd8
[  480.828875]  0000000000014440 0000000000014440 ffff880222db8000 ffff88021e9cdd80
[  480.828881]  0000000000000000 ffff880222dc1c28 ffff880222dc1c9c 0000000000001388
[  480.828888] Call Trace:
[  480.828902]  [<ffffffff817200d9>] schedule+0x29/0x70
[  480.828911]  [<ffffffff815424b5>] usb_kill_urb+0x65/0xa0
[  480.828919]  [<ffffffff810aaf00>] ? prepare_to_wait_event+0x100/0x100
[  480.828926]  [<ffffffff81542c98>] usb_start_wait_urb+0xc8/0x150
[  480.828934]  [<ffffffff81542de5>] usb_control_msg+0xc5/0x110
[  480.828941]  [<ffffffff8153a67b>] ? hub_port_init+0x46b/0xb10
[  480.828947]  [<ffffffff8153a6c8>] hub_port_init+0x4b8/0xb10
[  480.828954]  [<ffffffff8153baa5>] hub_port_connect_change+0x185/0xb50
[  480.828960]  [<ffffffff81542df4>] ? usb_control_msg+0xd4/0x110
[  480.828967]  [<ffffffff8153c934>] hub_events+0x4c4/0xa20
[  480.828974]  [<ffffffff8153cec5>] hub_thread+0x35/0x160
[  480.828981]  [<ffffffff810aaf00>] ? prepare_to_wait_event+0x100/0x100
[  480.828987]  [<ffffffff8153ce90>] ? hub_events+0xa20/0xa20
[  480.828993]  [<ffffffff8108b3d2>] kthread+0xd2/0xf0
[  480.829000]  [<ffffffff8108b300>] ? kthread_create_on_node+0x1d0/0x1d0
[  480.829007]  [<ffffffff8172c5bc>] ret_from_fork+0x7c/0xb0
[  480.829013]  [<ffffffff8108b300>] ? kthread_create_on_node+0x1d0/0x1d0
[  480.829035] INFO: task upowerd:1451 blocked for more than 120 seconds.
[  480.829039]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  480.829041] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  480.829044] upowerd         D ffff88022ed54440     0  1451      1 0x00000000
[  480.829050]  ffff88021e287dd0 0000000000000002 ffff8802202eafe0 ffff88021e287fd8
[  480.829056]  0000000000014440 0000000000014440 ffff8802202eafe0 ffff88022337c8e8
[  480.829062]  ffff88022337c8ec ffff8802202eafe0 00000000ffffffff ffff88022337c8f0
[  480.829068] Call Trace:
[  480.829076]  [<ffffffff817205f9>] schedule_preempt_disabled+0x29/0x70
[  480.829083]  [<ffffffff81722465>] __mutex_lock_slowpath+0x135/0x1b0
[  480.829090]  [<ffffffff817224ff>] mutex_lock+0x1f/0x2f
[  480.829096]  [<ffffffff8154a5e9>] read_descriptors+0x39/0x110
[  480.829102]  [<ffffffff8123298b>] ? sysfs_bin_read+0x8b/0x1d0
[  480.829107]  [<ffffffff812329de>] sysfs_bin_read+0xde/0x1d0
[  480.829115]  [<ffffffff811bc9e5>] vfs_read+0x95/0x160
[  480.829121]  [<ffffffff811bd4f9>] SyS_read+0x49/0xa0
[  480.829127]  [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[  480.829182] INFO: task lsusb:2785 blocked for more than 120 seconds.
[  480.829185]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  480.829187] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  480.829190] lsusb           D ffff88022ed14440     0  2785   1771 0x00000004
[  480.829195]  ffff88021d7f1dd0 0000000000000002 ffff8802018f0000 ffff88021d7f1fd8
[  480.829201]  0000000000014440 0000000000014440 ffff8802018f0000 ffff88022337c8e8
[  480.829207]  ffff88022337c8ec ffff8802018f0000 00000000ffffffff ffff88022337c8f0
[  480.829214] Call Trace:
[  480.829221]  [<ffffffff817205f9>] schedule_preempt_disabled+0x29/0x70
[  480.829228]  [<ffffffff81722465>] __mutex_lock_slowpath+0x135/0x1b0
[  480.829235]  [<ffffffff817224ff>] mutex_lock+0x1f/0x2f
[  480.829241]  [<ffffffff8154a5e9>] read_descriptors+0x39/0x110
[  480.829246]  [<ffffffff8123298b>] ? sysfs_bin_read+0x8b/0x1d0
[  480.829251]  [<ffffffff812329de>] sysfs_bin_read+0xde/0x1d0
[  480.829257]  [<ffffffff811bc9e5>] vfs_read+0x95/0x160
[  480.829263]  [<ffffffff811bd4f9>] SyS_read+0x49/0xa0
[  480.829270]  [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[  600.656720] INFO: task khubd:61 blocked for more than 120 seconds.
[  600.656728]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  600.656731] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  600.656735] khubd           D ffff88022ed14440     0    61      2 0x00000000
[  600.656742]  ffff880222dc1bb8 0000000000000002 ffff880222db8000 ffff880222dc1fd8
[  600.656750]  0000000000014440 0000000000014440 ffff880222db8000 ffff88021e9cdd80
[  600.656757]  0000000000000000 ffff880222dc1c28 ffff880222dc1c9c 0000000000001388
[  600.656763] Call Trace:
[  600.656777]  [<ffffffff817200d9>] schedule+0x29/0x70
[  600.656785]  [<ffffffff815424b5>] usb_kill_urb+0x65/0xa0
[  600.656794]  [<ffffffff810aaf00>] ? prepare_to_wait_event+0x100/0x100
[  600.656801]  [<ffffffff81542c98>] usb_start_wait_urb+0xc8/0x150
[  600.656809]  [<ffffffff81542de5>] usb_control_msg+0xc5/0x110
[  600.656815]  [<ffffffff8153a67b>] ? hub_port_init+0x46b/0xb10
[  600.656821]  [<ffffffff8153a6c8>] hub_port_init+0x4b8/0xb10
[  600.656828]  [<ffffffff8153baa5>] hub_port_connect_change+0x185/0xb50
[  600.656835]  [<ffffffff81542df4>] ? usb_control_msg+0xd4/0x110
[  600.656842]  [<ffffffff8153c934>] hub_events+0x4c4/0xa20
[  600.656849]  [<ffffffff8153cec5>] hub_thread+0x35/0x160
[  600.656856]  [<ffffffff810aaf00>] ? prepare_to_wait_event+0x100/0x100
[  600.656862]  [<ffffffff8153ce90>] ? hub_events+0xa20/0xa20
[  600.656868]  [<ffffffff8108b3d2>] kthread+0xd2/0xf0
[  600.656874]  [<ffffffff8108b300>] ? kthread_create_on_node+0x1d0/0x1d0
[  600.656882]  [<ffffffff8172c5bc>] ret_from_fork+0x7c/0xb0
[  600.656888]  [<ffffffff8108b300>] ? kthread_create_on_node+0x1d0/0x1d0
[  600.656910] INFO: task upowerd:1451 blocked for more than 120 seconds.
[  600.656913]       Tainted: PF          O 3.13.0-32-generic #57-Ubuntu
[  600.656916] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  600.656918] upowerd         D ffff88022ed54440     0  1451      1 0x00000000
[  600.656924]  ffff88021e287dd0 0000000000000002 ffff8802202eafe0 ffff88021e287fd8
[  600.656931]  0000000000014440 0000000000014440 ffff8802202eafe0 ffff88022337c8e8
[  600.656937]  ffff88022337c8ec ffff8802202eafe0 00000000ffffffff ffff88022337c8f0
[  600.656943] Call Trace:
[  600.656951]  [<ffffffff817205f9>] schedule_preempt_disabled+0x29/0x70
[  600.656958]  [<ffffffff81722465>] __mutex_lock_slowpath+0x135/0x1b0
[  600.656964]  [<ffffffff817224ff>] mutex_lock+0x1f/0x2f
[  600.656971]  [<ffffffff8154a5e9>] read_descriptors+0x39/0x110
[  600.656977]  [<ffffffff8123298b>] ? sysfs_bin_read+0x8b/0x1d0
[  600.656982]  [<ffffffff812329de>] sysfs_bin_read+0xde/0x1d0
[  600.656989]  [<ffffffff811bc9e5>] vfs_read+0x95/0x160
[  600.656995]  [<ffffffff811bd4f9>] SyS_read+0x49/0xa0
[  600.657002]  [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[ 1117.095950] systemd-hostnamed[3017]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 1178.857471] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

Ouff!
Si un geek unbuntero avait une idée pour permettre de booter correctement, de garder les partitions comme elle doivent être et pouvoir utiliser les USB, ce serait un vrai bonheur.... Un grand Merci d'avance

#19 Re : -1 »  [RÉSOLU] Problèmes de partitions et Kernel Panic » Le 30/07/2014, à 04:36

LRDP
Réponses : 6

Merci, Bougron, pour ton intérêt à mon problème

Bougron a écrit :

J'explique: Tu as écris "Si j'aligne fstab sur blkid: même chose, si je débranche tous les disques:"
Comme c'est pas spécialement clair ce que tu dis, serais-tu en train de modifier les UUID contenus dans /etc/fstab.

J'avais essayé de faire correspondre les UUID de Fstab à blkid lorsque je voyais sda1 "UUID= xxxx251afa"  dans blkid  et sdd1 "UUID= xxxx78887" dans fstab,  je corrigeai le fstab en inversant les lettres, bien sur cela ne marchait pas et renvoyait en Kernel Panic; mais je n'ai tenté qu'une fois.

Bougron a écrit :

Tu as parlé de disques externes, C'est une autre piste, Si de temps en temps, tu branches une clé USB, ils peuvent changer de nom, Ou si tu te trompes sur le disque à mettre ou si par accident tu as installé une partie du Ubuntu sur un disque externe, Lorsque ce disque externe est absent, Ubunty va se rabattre sur une issue de secours qui n'est peut-être pas bonne.
Donc une précision s'impose, Combien de disques internes?

Il y a trois disques internes, les disques externes ne sont pas branchés puisque pas d'USB fonctionnel (à part, curieusement, celui qui détecte souris et clavier, qui freeezent quelques minutes après un démarrage). Je pensais aussi qu'Ubuntu avait une partie sur un disque (le "Volume 2To ou UUID= xxxx63934), mais je l'ai vidé, formaté etc... J'ai mentionné "débranché" pour indiquer que j'ai essayé de tourner avec le SSD seul, en débranchant les internes, l'ordinateur éteint.

Bougron a écrit :

Première chose, Indiques si ton bios boote
                        en LEGACY  ou en EFI

Il boote en Legacy, donc les tables GPT sont erronées mais boot-repair passe outre :

boot-info a écrit :

Error: The backup GPT table is corrupt, but the primary appears OK, so that will
be used.

À la question du BIOS : Le BIOS boote sur USB en first boot (et çà marche) CD-rom en second, SSD Corsair en third.

Bougron a écrit :

Si c'est tangent en temps de réponse, Le bios arrête le boot et prend  un autre disque de boot pour lancer une autre version d'ubuntu. Certainement ancienne donc avec un autre paramétrage. Voila une piste.

: là, il faut que j'essaye ; d'ailleurs boot-info indique

 Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sdd1.
Additional repair would be performed: unhide-bootmenu-10s   Settings chosen by the user
Custom-Repair
This setting will purge (in order to upgrade version) and reinstall the grub2 of sda1 into the MBR of sda, using the following options: upgrade-grub
The boot flag will be placed on sda1.
Additional repair will be performed: unhide-bootmenu-10s

  Mais il conseille encore sur un autre disque que celui où est installé Ubuntu.

Un sudo parted -l:

lrdp@lrdp-MS-7640:~$ sudo parted -l
[sudo] password for lrdp: 
Modèle: ATA Corsair Force GT (scsi)
Disque /dev/sda : 120GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos

Numéro  Début   Fin    Taille  Type      Système de fichiers  Fanions
 1      32,3kB  112GB  112GB   primary   ext4                 démarrage
 2      112GB   120GB  8480MB  extended
 5      112GB   120GB  8480MB  logical   linux-swap(v1)


Modèle: ATA WDC WD2002FAEX-0 (scsi)
Disque /dev/sdb : 2000GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : gpt

Numéro  Début   Fin     Taille  Système de fichiers  Nom  Fanions
 1      17,4kB  2000GB  2000GB  ext4                      msftdata


Modèle: ATA WDC WD2002FAEX-0 (scsi)
Disque /dev/sdc : 2000GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos

Numéro  Début   Fin     Taille  Type     Système de fichiers  Fanions
 1      32,3kB  2000GB  2000GB  primary  ext4


Erreur: La sauvegarde de table GPT est corrompue mais l'originale semble valide
et sera donc utilisée.
OK/Annuler/Cancel? o                                                      
Modèle: ATA WDC WD5001AALS-0 (scsi)
Disque /dev/sdd : 500GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : gpt

Numéro  Début   Fin    Taille  Système de fichiers  Nom  Fanions
 1      17,4kB  500GB  500GB   ext4                      msftdata


lrdp@lrdp-MS-7640:~$                                                       

et le fdisk:

lrdp@lrdp-MS-7640:~$ sudo fdisk -l

Disk /dev/sda: 120.0 GB, 120033041920 bytes
255 têtes, 63 secteurs/piste, 14593 cylindres, total 234439535 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xd119d119

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1   *          63   217873529   108936733+  83  Linux
/dev/sda2       217873591   234436544     8281477    5  Étendue
/dev/sda5       217873593   234436544     8281476   82  partition d'échange Linux / Solaris

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdb » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x1b908688

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1               1  3907029167  1953514583+  ee  GPT

Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xb14db14e

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdc1              63  3907029167  1953514552+  83  Linux

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdd » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


Disk /dev/sdd: 500.1 GB, 500106780160 bytes
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976771055 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xb14db14d

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdd1               1   976771054   488385527   ee  GPT
lrdp@lrdp-MS-7640:~$ 

je refais un blkid :

lrdp@lrdp-MS-7640:~$ sudo blkid
/dev/sda1: UUID="42579596-5332-4571-957c-be5efcb78887" TYPE="ext4" 
/dev/sda5: UUID="429b6981-6923-45cd-8752-e1ad109dac94" TYPE="swap" 
/dev/sdb1: LABEL="Nouveau volume" UUID="f57c1c25-8313-469e-a1bc-9177a6549d1a" TYPE="ext4" 
/dev/sdc1: LABEL="Volume 2To" UUID="5e728d9a-d92b-40db-b5e2-53c715b63934" TYPE="ext4" 
/dev/sdd1: LABEL="Documents" UUID="64bf8cd7-be61-4d1b-9530-db00de251afa" TYPE="ext4" 
lrdp@lrdp-MS-7640:~$ 

qui ne correspond pas au premier cité (#1), qui est cohérent avec le fstab, mais pas plus d'USB (lsusb bloque) mad

lrdp@lrdp-MS-7640:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

#Entry for /dev/sda1 :
UUID=42579596-5332-4571-957c-be5efcb78887	/	ext4	errors=remount-ro	0	1
#Entry for /dev/sdb1 :
UUID=64bf8cd7-be61-4d1b-9530-db00de251afa	/media/Documents_	ext4	defaults	0	2
#Entry for /dev/sdd1 :
UUID=f57c1c25-8313-469e-a1bc-9177a6549d1a	/media/Nouveau040volume_	ext4	defaults	0	2
#Entry for /dev/sda5 :
UUID=429b6981-6923-45cd-8752-e1ad109dac94	none	swap	sw	0	0


lrdp@lrdp-MS-7640:~$ 

Enfin

Bougron a écrit :

SI tu as un disque externe de 2 TO branché en USB, fais en sorte de ne le connecter qu'après le démarrage de ta machine.

je ne branche plus de disque en USB externe depuis la panne, attendant que lsusb fonctionne, indiquant alors que tout marche.

Si ces réponses éclaire un peu ta lanterne, peut-être qu'on y arrivera? En tout cas, Merci!

#20 Re : -1 »  [RÉSOLU] Problèmes de partitions et Kernel Panic » Le 30/07/2014, à 12:14

LRDP
Réponses : 6

Merci Bougron, mais cela semble Résolu !! lol
Après avoir écrit le post #3, j'ai booté sur une Debian Wheezy, et elle bloquait en indiquant lors du splash "disabling IRQ22". J'ai relancé Ubuntu et vérifié Dmesg qui, sur une petite ligne ([   28.602224] Disabling IRQ #22) indique la même chose; j'ai rouvert la tour et enlevé une petite carte PCI-USB avec un port interne que j'utilisais pour alimenter la plaque Watercooling du CPU. Reboot et là, Miracle, les USB refonctionnent!! Je peux brancher Disques durs USB, clefs USB 2 & 3 sans soucis! Et cela faisait cafouiller tout le système d'exploitation et la machine. Mais c'est inquiétant qu'un matériel insignifiant puisse emm... autant, même dangereux car j'ai déjà eu la prise d'alimentation d'un lecteur DVD qui a fondu, sans aucun symptôme, risquant ainsi un incendie!! quand on pense qu'on laisse généralement tourner les ordis 24h/24.
J'ai encore un peu de problème avec le /dev/sdc1: LABEL="Volume 2To" UUID="5e728d9a-d92b-40db-b5e2-53c715b63934" qui se monte dans un dossier virtuel de /media (en /media/lrdp) empêchant le changement de permission ou le partage, n'étant pas accessible en ligne de commande, ni par Nautilus en root qui plante si j'explore le disque.

Je mets RESOLU.

Merci encore!

#21 Re : -1 »  [RÉSOLU] Problèmes de partitions et Kernel Panic » Le 30/07/2014, à 20:17

LRDP
Réponses : 6

Voilà, le petit problème du 2To est aussi résolu en passant par l'ex-Palimpset (Disques dans le Dash de Trusty), en modifiant le montage en manuel, il cherche à se monter alors dans /mnt avec comme nom son UUID; le montage bloque par caprice en indiquant que "x-gvfs-show" empêche le montage dans fstab; j'ai mis "comment=x-gvfs-show", et çà se monte tout seul, j'ai ensuite modifié les permissions par Nautilus sur ses propriétés affichées dans /mnt. C'est un peu anarchique entre /media et /mnt mais çà marche tranquillement, c'est le principal!
2 fois RESOLU donc.
Encore Merci Bougron.

#22 Re : -1 »  [ABANDONNE]Démarrage d'Ubuntu et lancements lents, pb USB et son » Le 29/07/2014, à 12:46

LRDP
Réponses : 36

Problème de boot et de partitions : abandonné

#23 Re : -1 »  [ABANDONNE]Démarrage d'Ubuntu et lancements lents, pb USB et son » Le 30/07/2014, à 04:54

LRDP
Réponses : 36

@ Sibe,
justement, j'ai préparé des disques Debian, Fedora et OpenSUSE pour s'amuser...  big_smile

#24 Re : -1 »  [ABANDONCertains ports USB ne se montent pas et Ubuntu ne s'éteint pas » Le 29/07/2014, à 12:44

LRDP
Réponses : 5

Problème de partitions et de boot : abandonné