Pages : 1
#0 -1 » pagaille dans mes partitions » Aujourd'hui à 12:43
- agn01
- Réponses : 2
Bonjour,
J'avais Ubuntu 10.10 installé en dual-boot avec Windows XP.
J'ai voulu installer par-dessus la 12.04 LTS et ça a totalement foiré. Résultat : plus de Ubuntu et des partitions devenues invisibles.
J'ai retrouvé l'accès à mes partitions avec testdisk.
Avant de tenter une réinstallation j'ai voulu m'assurer que tout était nickel côté partitions. Et là big problème : manifestement ma partition étendue va au-delà des limites du disque.
Comment réparer ça sachant qu'elle contient 4 partitions windows de données auxquelles je tiens. Par contre je me fiche du contenu des partitions linux à l'exception de sd10 (Oscar pour restauration de Windows).
Merci à qui pourra me conseiller.
Ci-dessous les résultats de mes investigations.
* Gparted :

* resultat de fdisk -lu
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x03ef03ee
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 * 63 83891429 41945683+ 7 HPFS/NTFS/exFAT
/dev/sdb2 83891430 115346699 15727635 83 Linux
/dev/sdb3 115346700 123732629 4192965 82 partition d'échange Linux / Solaris
/dev/sdb4 123732630 976784129 426525750 f Étendue W95 (LBA)
/dev/sdb5 123732693 165662279 20964793+ 83 Linux
/dev/sdb6 165662343 375374789 104856223+ 7 HPFS/NTFS/exFAT
/dev/sdb7 375374853 585087299 104856223+ c W95 FAT32 (LBA)
/dev/sdb8 585087363 668978729 41945683+ 7 HPFS/NTFS/exFAT
/dev/sdb9 668978793 878691239 104856223+ 7 HPFS/NTFS/exFAT
/dev/sdb10 878691303 976768064 49038381 83 Linux* extrait de boot-info
Extrait de boot info (avec boot repair)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 83,891,429 83,891,367 7 NTFS / exFAT / HPFS
/dev/sdb2 83,891,430 115,346,699 31,455,270 83 Linux
/dev/sdb3 115,346,700 123,732,629 8,385,930 82 Linux swap / Solaris
/dev/sdb4 123,732,630 976,784,129 853,051,500 f W95 Extended (LBA)
/dev/sdb5 123,732,693 165,662,279 41,929,587 83 Linux
/dev/sdb6 165,662,343 375,374,789 209,712,447 7 NTFS / exFAT / HPFS
/dev/sdb7 375,374,853 585,087,299 209,712,447 c W95 FAT32 (LBA)
/dev/sdb8 585,087,363 668,978,729 83,891,367 7 NTFS / exFAT / HPFS
/dev/sdb9 668,978,793 878,691,239 209,712,447 7 NTFS / exFAT / HPFS
/dev/sdb10 878,691,303 976,768,064 98,076,762 83 Linux
/dev/sdb4 ends after the last sector of /dev/sdb
*****************************
sdb7: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sdb7 starts
at sector 0. But according to the info from fdisk,
sdb7 starts at sector 375374853.#1 Re : -1 » pagaille dans mes partitions » Aujourd'hui à 20:51
- agn01
- Réponses : 2
Bonjour et merci de m'aider.
Effectivement auparavant et même après l'installation ratée de la version 12.04, sda4 (qui est maintenant sdb4) se terminait au secteur 976768064.
C'est après la récupération de mes partitions logiques (sdb5 à sdb10) avec testdisk que celle-ci est montée à 976784129.
En regardant attentivement je m'aperçois que l'espace entre le secteur de fin de la sd10 (secteur 976768064) et celui de la partition étendue qui déborde (secteur 976784129) n'est occupé par aucune partition logique. Je suis tentée de réduire la partition étendue à 976768064 mais je ne sais pas faire avec testdisk et ne sais pas si c'est sans risque pour le contenu des partitions logiques.
Je pense qu'il faudrait d'abord que je résolve ce problème :
sdb7: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sdb7 starts
at sector 0. But according to the info from fdisk,
sdb7 starts at sector 375374853.As-tu une idée ? D'où fdisk sort-il ses infos ?
#2 -1 » ma sauvegarde de mbr est-elle correcte ? » Hier à 15:18
- agn01
- Réponses : 0
Bonjour,
Suite à une installation avortée de Ubuntu 12.04 LTS ("Ubuntu n'a pas pu résoudre les conflits") j'ai perdu la version 10.10 qui était installée mais surtout je ne voyais plus mes partitions logiques de la partition étendue, et ceci ni avec un CD Live Ubuntu ni sous Windows.
J'ai pu les retrouver en utilisant testdisk (depuis Windows ) qui a réparé ce qu'il fallait (j'ai fait une donation tellement j'étais contente).
Une chatte échaudée en valant deux, j'ai pris soin de sauvegarder ma mbr avec un utilitaire sous windows
00000000 33 c0 8e d0 bc 00 7c fb 50 07 50 1f fc be 1b 7c |3.....|.P.P....||
00000010 bf 1b 06 50 57 b9 e5 01 f3 a4 cb bd be 07 b1 04 |...PW...........|
00000020 38 6e 00 7c 09 75 13 83 c5 10 e2 f4 cd 18 8b f5 |8n.|.u..........|
00000030 83 c6 10 49 74 19 38 2c 74 f6 a0 b5 07 b4 07 8b |...It.8,t.......|
00000040 f0 ac 3c 00 74 fc bb 07 00 b4 0e cd 10 eb f2 88 |..<.t...........|
00000050 4e 10 e8 46 00 73 2a fe 46 10 80 7e 04 0b 74 0b |N..F.s*.F..~..t.|
00000060 80 7e 04 0c 74 05 a0 b6 07 75 d2 80 46 02 06 83 |.~..t....u..F...|
00000070 46 08 06 83 56 0a 00 e8 21 00 73 05 a0 b6 07 eb |F...V...!.s.....|
00000080 bc 81 3e fe 7d 55 aa 74 0b 80 7e 10 00 74 c8 a0 |..>.}U.t..~..t..|
00000090 b7 07 eb a9 8b fc 1e 57 8b f5 cb bf 05 00 8a 56 |.......W.......V|
000000a0 00 b4 08 cd 13 72 23 8a c1 24 3f 98 8a de 8a fc |.....r#..$?.....|
000000b0 43 f7 e3 8b d1 86 d6 b1 06 d2 ee 42 f7 e2 39 56 |C..........B..9V|
000000c0 0a 77 23 72 05 39 46 08 73 1c b8 01 02 bb 00 7c |.w#r.9F.s......||
000000d0 8b 4e 02 8b 56 00 cd 13 73 51 4f 74 4e 32 e4 8a |.N..V...sQOtN2..|
000000e0 56 00 cd 13 eb e4 8a 56 00 60 bb aa 55 b4 41 cd |V......V.`..U.A.|
000000f0 13 72 36 81 fb 55 aa 75 30 f6 c1 01 74 2b 61 60 |.r6..U.u0...t+a`|
00000100 6a 00 6a 00 ff 76 0a ff 76 08 6a 00 68 00 7c 6a |j.j..v..v.j.h.|j|
00000110 01 6a 10 b4 42 8b f4 cd 13 61 61 73 0e 4f 74 0b |.j..B....aas.Ot.|
00000120 32 e4 8a 56 00 cd 13 eb d6 61 f9 c3 49 6e 76 61 |2..V.....a..Inva|
00000130 6c 69 64 20 70 61 72 74 69 74 69 6f 6e 20 74 61 |lid partition ta|
00000140 62 6c 65 00 45 72 72 6f 72 20 6c 6f 61 64 69 6e |ble.Error loadin|
00000150 67 20 6f 70 65 72 61 74 69 6e 67 20 73 79 73 74 |g operating syst|
00000160 65 6d 00 4d 69 73 73 69 6e 67 20 6f 70 65 72 61 |em.Missing opera|
00000170 74 69 6e 67 20 73 79 73 74 65 6d 00 00 00 00 00 |ting system.....|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 00 00 00 00 00 2c 44 63 ee 03 ef 03 00 00 80 01 |.....,Dc........|
000001c0 01 00 07 fe ff ff 3f 00 00 00 a7 14 00 05 00 fe |......?.........|
000001d0 ff ff 83 fe ff ff e6 14 00 05 26 f8 df 01 00 fe |..........&.....|
000001e0 ff ff 82 fe ff ff 0c 0d e0 06 8a f5 7f 00 00 fe |................|
000001f0 ff ff 0f fe ff ff 96 02 60 07 6c 88 d8 32 55 aa |........`.l..2U.|
00000200Maintenant je voudrais installer Ubuntu 12.04 LTS. Mais je prends d'infinies précautions avant de me lancer.
Pour commencer avec le live-cd j'ai fait une sauvegarde de la mbr :
00000000 33 c0 8e d0 bc 00 7c fb 50 07 50 1f fc be 1b 7c |3.....|.P.P....||
00000010 bf 1b 06 50 57 b9 e5 01 f3 a4 cb bd be 07 b1 04 |...PW...........|
00000020 38 6e 00 7c 09 75 13 83 c5 10 e2 f4 cd 18 8b f5 |8n.|.u..........|
00000030 83 c6 10 49 74 19 38 2c 74 f6 a0 b5 07 b4 07 8b |...It.8,t.......|
00000040 f0 ac 3c 00 74 fc bb 07 00 b4 0e cd 10 eb f2 88 |..<.t...........|
00000050 4e 10 e8 46 00 73 2a fe 46 10 80 7e 04 0b 74 0b |N..F.s*.F..~..t.|
00000060 80 7e 04 0c 74 05 a0 b6 07 75 d2 80 46 02 06 83 |.~..t....u..F...|
00000070 46 08 06 83 56 0a 00 e8 21 00 73 05 a0 b6 07 eb |F...V...!.s.....|
00000080 bc 81 3e fe 7d 55 aa 74 0b 80 7e 10 00 74 c8 a0 |..>.}U.t..~..t..|
00000090 b7 07 eb a9 8b fc 1e 57 8b f5 cb bf 05 00 8a 56 |.......W.......V|
000000a0 00 b4 08 cd 13 72 23 8a c1 24 3f 98 8a de 8a fc |.....r#..$?.....|
000000b0 43 f7 e3 8b d1 86 d6 b1 06 d2 ee 42 f7 e2 39 56 |C..........B..9V|
000000c0 0a 77 23 72 05 39 46 08 73 1c b8 01 02 bb 00 7c |.w#r.9F.s......||
000000d0 8b 4e 02 8b 56 00 cd 13 73 51 4f 74 4e 32 e4 8a |.N..V...sQOtN2..|
000000e0 56 00 cd 13 eb e4 8a 56 00 60 bb aa 55 b4 41 cd |V......V.`..U.A.|
000000f0 13 72 36 81 fb 55 aa 75 30 f6 c1 01 74 2b 61 60 |.r6..U.u0...t+a`|
00000100 6a 00 6a 00 ff 76 0a ff 76 08 6a 00 68 00 7c 6a |j.j..v..v.j.h.|j|
00000110 01 6a 10 b4 42 8b f4 cd 13 61 61 73 0e 4f 74 0b |.j..B....aas.Ot.|
00000120 32 e4 8a 56 00 cd 13 eb d6 61 f9 c3 49 6e 76 61 |2..V.....a..Inva|
00000130 6c 69 64 20 70 61 72 74 69 74 69 6f 6e 20 74 61 |lid partition ta|
00000140 62 6c 65 00 45 72 72 6f 72 20 6c 6f 61 64 69 6e |ble.Error loadin|
00000150 67 20 6f 70 65 72 61 74 69 6e 67 20 73 79 73 74 |g operating syst|
00000160 65 6d 00 4d 69 73 73 69 6e 67 20 6f 70 65 72 61 |em.Missing opera|
00000170 74 69 6e 67 20 73 79 73 74 65 6d 00 00 00 00 00 |ting system.....|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 00 00 00 00 00 2c 44 63 04 da 8a 8d 00 00 00 01 |.....,Dc........|
000001c0 01 00 07 fe ff ff 3f 00 00 00 bd ea ff 18 00 fe |......?.........|
000001d0 ff ff 07 fe ff ff fc ea ff 18 45 61 38 21 00 00 |..........Ea8!..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200Après avoir lu cette excellente documentation, j'ai eu la curiosité de comparer les deux sauvegardes.
Et là surprise : la partie correspondant à la table de partition (à partir de l'adresse 1be) est différente sur les deux sauvegardes !
Est-ce normal ?
A noter que mon inquiétude est augmentée par le fait que Gparted (lancé en live cd) m'indique "non alloué" pour mon disque sdb (celui des mbr sauvegardées) et que un boot info signale un problème avec la partition logique sdb7.
Je remercie d'avance celui ou celle qui pourra éclairer ma lanterne ou m'indiquer comment corriger d'éventuels problèmes,
#3 Re : -1 » conseils avant de poster pour un problème graphique » Le 16/08/2011, à 08:06
- agn01
- Réponses : 19
Bonjour,
Ayant eu des problèmes d'installation de Ubuntu 10.10 ou Ubuntu 11.04, je souhaite indiquer comment je m'en suis sortie ce qui pourrait éviter à d'autres de longues recherches sur internet.
J'ai cru comprendre que c'était l'endroit.
Premier problème :
Carte Nvidia Geforce 9500 GT.
Live CD Ubuntu 10.10 ou Ubuntu 11.04 : en choisissant "Installer" ça tournait en rond.
Solution qui a permis l'installation :
Lancer le Live CD
Dès qu'on voit cet écran![]()
taper sur la touche Majuscule (celle de gauche ?).
On obtient alors ceci :![]()
Taper F6. Différentes solutions sont proposées : j'ai choisi nomodetest.
Puis "Installer Ubuntu"
L'installation s'est passée normalement si ce n'est qu'à l'arrivée l'affichage rappelle le VGA de la préhistoire de l'informatique.
2ème problème :
Au redémarrage, écran noir avec un petit trait clignotant en haut à gauche.
Solution qui a permis de relancer Ubuntu :
Redémarrer. Quand l'écran du grub s'affiche (quelquechose qui ressemble à ça :![]()
taper e.
Des choses incompréhensibles pour un néophyte s'affichent de ce genre :![]()
Repérer "quiet splash" et écrire nomodeset derrière (avec un espace entre "quiet splash" et "nomodeset").
3ème problème :
On a encore un affichage type VGA.
Solution qui a permis d'obtenir un bel affichage :
Une fenêtre s'est ouverte automatiquement de ce genre là :![]()
sauf que le bouton devant la version recommandée" était gris.
J'ai sélectionné la version recommandée et ai cliqué sur Activer.
J'ai laissé faire l'installation et après redémarrage tout était parfait.
Notes :
* Je n'ai bien sûr rien inventé : j'ai trouvé les morceaux de solutions sur internet.
* En fait je crois que la fenêtre de mise à jour des pilotes propriétaires s'était ouverte dès la fin de l'installation. Mais comme je ne comprenais pas, je n'ai pas donné suite.
Il est probable qu'en choisissant d'activer le pilote recommandé à ce moment là on règle le problème en une seule étape.
Voilà, en espérant que ça aide.
#4 -1 » dual boot mbr et grub » Le 14/08/2011, à 16:29
- agn01
- Réponses : 8
Bonjour,
J'avais un disque dur sur lequel était installés en dual boot Windows xp (sda1) et Ubuntu 10.4 (sda2). L'installation avait été faite en utilisant l'amorçeur de Windows, sans modifier le MBR selon la procédure décrite ici.
J'ai du réinstaller Windows ( les partitions n'ont pas été modifiées). Auparavant j'avais pris soin de sauvegarder la mbr et le fichiers grub.bs et boot.ini.
Suite à la réinstallation de XP le lancement d'Ubuntu générait une erreur que mes connaissances très limitées m'interdisaient de résoudre.
J'ai alors utilisé un live-CD de la 11.04 et comme il me proposait une mise à jour j'ai accepté ce choix. Tout fonctionne bien si ce n'est que manifestement, sans rien me dire, le grub a été installé dans la mbr.
J'aimerais revenir à la situation précédente (grub hors mbr).
Je pense qu'il me faut :
a) remettre la mbr sauvegardée. Puis-je le faire sous linux (comme indiqué ici) ou vaut-il mieux utiliser le CD de restauration de Windows ?
b) placer un grub dans la partition linux (sda2). Comment faire ? Et ne faut-il pas le faire avant l'étape a) ?
c) obtenir un grub.bs à placer dans la racine de sda1 et modifier le boot.ini. A priori je sais faire :
sudo dd if=/dev/sdxY of=~/grub.bs bs=512 count=1Merci d'éclaircir les idées d'une débutante.
#5 Re : -1 » dual boot mbr et grub » Le 14/08/2011, à 19:01
- agn01
- Réponses : 8
Bonjour et merci,
C'est "installer ton grub sur /dev/sda2" que je ne suis pas sure de savoir faire. Est-ce ainsi ?
sudo grub-install --force /dev/sda2J'avais vu une discussion sur boot-repair mais je ne suis pas sûre de maîtriser les choix et j'ai l'impression qu'on ne peut pas utiliser une mbr récupérée manuellement. D'après ce qui est dit il aurait fallu utiliser Clean-Ubiquity. Trop tard ...
#6 Re : -1 » dual boot mbr et grub » Le 14/08/2011, à 20:08
- agn01
- Réponses : 8
Rebonjour et encore merci
Je résume, ça pourra servir à d'autres :
1) Avec un Live CD Ubuntu
a)installer le grub dans la partition linux
sudo grub-install --force /dev/sda2b) créer le fichier grub.bs
sudo dd if=/dev/sda2 of=~/grub.bs bs=512 count=1(il se trouve dans le dossier Ubuntu)
sauvegarder sur clé usb
Eteindre l'ordinateur
2)Redémarrer en bootant sur le CD Windows
Choisir Restaurer ; Fixmbr
Redémarrer
3) Lancer Windows
transférer grub.bs de la clé usb dans la racine du disque où se trouve Windows
modifier boot.ini en ajoutant à la fin :
C:\grub.bs="Ubuntu"
4) Relancer l'ordi.
Si ce n'est pas trop abuser, deux petites questions :
L'étape 1 peut-elle se faire avec une session Ubuntu normale, si on y a accès, ou doit-on utiliser un Live CD ?
A quoi sert de sauver la mbr si en fait on utilise une autre méthode pour la restaurer ?
En attendant je mets en oeuvre la procédure et si ça marche : RESOLU.
#7 Re : -1 » dual boot mbr et grub » Le 14/08/2011, à 22:07
- agn01
- Réponses : 8
C'est encore moi.
Sur le papier c'était tout simple mais les problèmes ont commencé à l'étape 1a, réalisée avec un Live CD :
ubuntu@ubuntu:~$ sudo grub-install --force /dev/sda2
/usr/sbin/grub-probe: error: cannot stat `aufs'.
ubuntu@ubuntu:~$Après recherche sur internet, ça a l'air d'être un bug.
J'ai trouvé la solution ici :
sudo mkdir /media/sda2puis
sudo mount /dev/sda2 /media/sda2puis
sudo grub-install --root-directory=/media/sda2 /dev/sdaEtape 1b : OK (fichier grub_11_04.bs)
Etape 2 : OK
Etape 3 : OK ; boot.ini :
[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /fastdetect /NoExecute=OptIn
C:\grub_11_04.bs="UBUNTU 11_04"Etape 4 : j'obtiens bien le panneau de choix entre Windows et Ubuntu mais le choix Ubuntu conduit à un écran noir avec tiret clignotant en haut à gauche.
Et là je suis coincée.
#8 Re : -1 » dual boot mbr et grub » Le 14/08/2011, à 22:56
- agn01
- Réponses : 8
Un petit supplément : le résultat du bootinfoscript :
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
=> Windows is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub2 (v1.97-1.98) in the file /grub_11_04.bs looks
at sector 112153926 of the same hard drive for
core.img, but core.img can not be found at this
location.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________________________________
File system: ext3
Boot sector type: Grub2 (v1.97-1.98)
Boot sector info: Grub2 (v1.97-1.98) is installed in the boot sector of
sda2 and looks at sector 112153926 of the same hard
drive for core.img, but core.img can not be found at
this location.
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sda8 starts
at sector 0. But according to the info from fdisk,
sda8 starts at sector 375374853.
Operating System:
Boot files:
sda9: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda10: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda11: _________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sda11
starts at sector 0. But according to the info from
fdisk, sda11 starts at sector 878691303.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: MSWIN4.1: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub2 (v1.97-1.98) in the file /grub_11_04.bs looks
at sector 112153926 of the same hard drive for
core.img, but core.img can not be found at this
location.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda: 500.1 Go, 500107862016 octets
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 83,891,429 83,891,367 7 NTFS / exFAT / HPFS
/dev/sda2 83,891,430 115,346,699 31,455,270 83 Linux
/dev/sda3 115,346,700 123,732,629 8,385,930 82 Linux swap / Solaris
/dev/sda4 123,732,691 976,768,064 853,035,374 5 Extended
/dev/sda5 123,732,693 144,697,454 20,964,762 83 Linux
/dev/sda6 144,697,518 165,662,279 20,964,762 83 Linux
/dev/sda7 165,662,343 375,374,789 209,712,447 7 NTFS / exFAT / HPFS
/dev/sda8 375,374,853 585,087,299 209,712,447 b W95 FAT32
/dev/sda9 585,087,363 668,978,729 83,891,367 7 NTFS / exFAT / HPFS
/dev/sda10 668,978,793 878,691,239 209,712,447 7 NTFS / exFAT / HPFS
/dev/sda11 878,691,303 976,768,064 98,076,762 b W95 FAT32
Drive: sdb _____________________________________________________________________
Disque /dev/sdb: 4105 Mo, 4105175040 octets
82 têtes, 18 secteurs/piste, 5432 cylindres, total 8017920 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 8,064 7,811,071 7,803,008 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 3CFC2976FC292B98 ntfs
/dev/sda10 46FDB47700C5E7FC ntfs SVG_DONNEES-NTFS
/dev/sda11 C629-574B vfat SVG-DONNEES
/dev/sda2 b8f1338f-c9de-485f-9d00-e3711f332d80 ext3
/dev/sda3 03ff3449-7f6e-4f41-a26f-1e34d067cae8 swap
/dev/sda5 283e145c-1894-473e-a9ee-17bab0e24866 ext3
/dev/sda6 b5ea3ec1-5e82-4de1-95a5-e71da8895b1d ext3
/dev/sda7 0C41A3B80E394535 ntfs DONNEES-NTFS
/dev/sda8 C53E-BBC4 vfat DONNEES-FAT
/dev/sda9 4F9CFFA36D47AC93 ntfs Serveur_info
/dev/sdb1 6E42-0B9A vfat CLE_ROUGE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /media/3CFC2976FC292B98 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sda2 /media/b8f1338f-c9de-485f-9d00-e3711f332d80 ext3 (rw,nosuid,nodev,uhelper=udisks)
/dev/sda5 /media/283e145c-1894-473e-a9ee-17bab0e24866 ext3 (rw,nosuid,nodev,uhelper=udisks)
/dev/sr0 /cdrom iso9660 (ro,noatime)
================================ sda1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /fastdetect /NoExecute=OptIn
C:\grub_11_04.bs="UBUNTU 11_04"--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root b5ea3ec1-5e82-4de1-95a5-e71da8895b1d
if loadfont /share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=b8f1338f-c9de-485f-9d00-e3711f332d80 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, avec Linux 2.6.38-8-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=b8f1338f-c9de-485f-9d00-e3711f332d80 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 2.6.32-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
linux /boot/vmlinuz-2.6.32-32-generic root=UUID=b8f1338f-c9de-485f-9d00-e3711f332d80 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.32-32-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-32-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
echo 'Loading Linux 2.6.32-32-generic ...'
linux /boot/vmlinuz-2.6.32-32-generic root=UUID=b8f1338f-c9de-485f-9d00-e3711f332d80 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-32-generic
}
menuentry 'Ubuntu, avec Linux 2.6.31-20-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
linux /boot/vmlinuz-2.6.31-20-generic root=UUID=b8f1338f-c9de-485f-9d00-e3711f332d80 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.31-20-generic
}
menuentry 'Ubuntu, avec Linux 2.6.31-20-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
echo 'Loading Linux 2.6.31-20-generic ...'
linux /boot/vmlinuz-2.6.31-20-generic root=UUID=b8f1338f-c9de-485f-9d00-e3711f332d80 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-20-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root b8f1338f-c9de-485f-9d00-e3711f332d80
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professionnel (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 3CFC2976FC292B98
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=b8f1338f-c9de-485f-9d00-e3711f332d80 / ext3 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=283e145c-1894-473e-a9ee-17bab0e24866 /home ext3 defaults 0 2
# /media/donnees_fat32 was on /dev/sda8 during installation
UUID=C53E-BBC4 /media/donnees_fat32 vfat utf8,umask=007,gid=46 0 1
# /media/donnees_ntfs was on /dev/sda7 during installation
UUID=0C41A3B80E394535 /media/donnees_ntfs ntfs defaults,umask=007,gid=46 0 0
# /media/svg_XP was on /dev/sda9 during installation
UUID=4F9CFFA36D47AC93 /media/svg_XP ntfs defaults,umask=007,gid=46 0 0
# /media/svg_donnees_fat32 was on /dev/sda11 during installation
UUID=C629-574B /media/svg_donnees_fat32 vfat utf8,umask=007,gid=46 0 1
# /media/svg_donnees_nfts was on /dev/sda10 during installation
UUID=46FDB47700C5E7FC /media/svg_donnees_nfts ntfs defaults,umask=007,gid=46 0 0
# /usr was on /dev/sda6 during installation
UUID=b5ea3ec1-5e82-4de1-95a5-e71da8895b1d /usr ext3 defaults 0 2
# swap was on /dev/sda3 during installation
UUID=03ff3449-7f6e-4f41-a26f-1e34d067cae8 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
53.385390282 = 57.322126336 boot/grub/core.img 1
53.408816338 = 57.347279872 boot/grub/grub.cfg 1
53.407816887 = 57.346206720 boot/initrd.img-2.6.31-20-generic 4
53.431929588 = 57.372097536 boot/initrd.img-2.6.32-32-generic 3
53.444235802 = 57.385311232 boot/initrd.img-2.6.38-8-generic 10
53.467173576 = 57.409940480 boot/vmlinuz-2.6.31-20-generic 2
53.475184441 = 57.418542080 boot/vmlinuz-2.6.32-32-generic 2
53.424029350 = 57.363614720 boot/vmlinuz-2.6.38-8-generic 3
53.444235802 = 57.385311232 initrd.img 10
53.424029350 = 57.363614720 vmlinuz 3
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda4
00000000 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 |................|
*
000001b0 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 00 fe |................|
000001c0 ff ff 83 fe ff ff 02 00 00 00 9a e5 3f 01 00 fe |............?...|
000001d0 ff ff 05 fe ff ff 9c e5 3f 01 d9 e5 3f 01 00 00 |........?...?...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200Je n'y comprends pas grand chose si ce n'est la ligne
UUID=b8f1338f-c9de-485f-9d00-e3711f332d80 / ext3 errors=remount-ro 0 1dans sda2/etc/fstab
C'est peut-être cette erreur qu'il faut corriger ?
#9 Re : -1 » dual boot mbr et grub » Le 16/08/2011, à 06:44
- agn01
- Réponses : 8
Bonjour,
Désolée, j'étais absente hier.
Hier soir j'ai tenté ta méthode et après le chroot j'ai eu droit à
bash: groups: command not foundLà j'ai craqué et ai décidé de réinstaller complètement linux, ce qui fut une autre galère pour cause de carte graphique.
Mais c'est une autre histoire ...si ce n'est que j'ai obtenu moultes fois l'écran noir avec tiret clignotant en haut à gauche que je mentionnais plus haut.
En tout cas merci pour ton aide.
Pages : 1

