Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
nombre réponses : 7

#0 -1 »  Problème avec SAMBA & Windows » Le 21/04/2014, à 20:23

Jielde
Réponses : 0

Salut,

J'ai installer dernièrement Samba sur une Lubuntu, mon but étant de partager avec windows les disques dur USB monter sur Lubuntu.
les répertoires à partager :

/media/username/My_Seagate
 /home/username/Téléchargements

Mon problème c'est que Windows me dit que je n'est pas l'autorisation d'accéder au répertoire "My_Seagate", par contre j'ai bien accès au répertoire "Téléchargements"
ma config smb.conf :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = workgroup

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
	max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
	syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
	server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;	passdb backend = tdbsam

	obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
	unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
	pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
	map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;	usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
	usershare allow guests = yes
	security = user
;	encrypt passwords = yes
;	guest ok = no
;	guest account = nobody
guest account = root
	username map = /etc/samba/smbusers

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[Téléchargements]
	path = /home/username/Téléchargements
	writeable = yes
;	browseable = yes
	guest ok = yes

[My_Seagate]
	path = /media/username/My_Seagate
	writeable = yes
;	browseable = yes
	guest ok = yes

#1 -1 »  Problème HDMI sur Intel nuc » Le 21/04/2014, à 03:15

Jielde
Réponses : 0

Salut,

Je viens d'installer Xubuntu sur mon tout nouveau Intel nuc D34010WYK et j'ai un problème très gênant.
Celui-ci est brancher via sa prise mini HDMI sur ma TV (HDMI, position 2), et si je change de source vers le HDMI 1 (par exemple), au moment de repasser sur le HDMI 2 je n'ai plus d'image, obliger de redémarrer le nuc.

Avez-vous une idée pour résoudre ce problème ?

#2 -1 »  Verrouiller ne fonctionne pas sous Gnome 3.6 » Le 24/10/2012, à 00:42

Jielde
Réponses : 7

Salut,

Je viens de passer sous ubuntu 12.10 ainsi que Gnome 3.6.
Mais j'ai un problème, la fonction "Verrouiller" dans le menu ne fonctionne pas. Même apres avoir forcer le verrouillage apres 30sec dans les paramètres, rien ne se passe.

Avez-vous une idée ?

#3 Re : -1 »  Verrouiller ne fonctionne pas sous Gnome 3.6 » Le 26/10/2012, à 23:58

Jielde
Réponses : 7

Bon Ok, avec sudo dpkg-reconfigure gdm cela fonctionne par contre je suis déçu du résultat.
Je préfère l'écran de connexion d'ubuntu normal et finalement le faite de tirer vers le haut l'image pour dévérouiller est vite énervant.

#4 Re : -1 »  Verrouiller ne fonctionne pas sous Gnome 3.6 » Le 31/10/2012, à 00:08

Jielde
Réponses : 7

J'ai un p'tit truc qui me gène mais n'a rien a voir avec mon problème initial.
Sur la version antérieur à Gnome Shell 3.6, j'avais la liste des applications lancé sur ma barre du haut. Une sorte de barre des taches.
Mais cette extension ne semble plus compatible. Avez-vous une autre astuces ?

#5 -1 »  [RESOLU] Installation d'ubuntu 12.04 impossible (B43) » Le 24/05/2012, à 23:34

Jielde
Réponses : 3

Bonjour,

J'essaye depuis plusieurs heures d'installer ubuntu 12.04, j'ai même essayer avec la variante Voyager mais impossible de l'installer.
J'ai un message d'erreur avant même de rentrer dans le LIVE ou en passant par Installer :

[ 263.422892] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 263.422892] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[ 263.422892] b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.

J'ai pas de bouton pour désactiver le wifi sur mon ordi portable.

Pouvez-vous m'aider ?

Merci.

#6 Re : -1 »  [RESOLU] Installation d'ubuntu 12.04 impossible (B43) » Le 25/05/2012, à 09:45

Jielde
Réponses : 3
toutafai a écrit :

Bonsoir,

essaye cela :

sudo apt-get install firmware-b43-lpphy-installer

Je ne peut pas le faire vu que je n'arrive pas à installer ubuntu big_smile.

Bon j'ai trouver la solution ici : http://forum.ubuntu-fr.org/viewtopic.ph … 1#p9042191
Tout marche bien, par contre surprise, mon ordi est tellement ******* que le système n'est pas du tout fluide voir bloque.
Sniff, de retour sous win XP.