Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.
nombre réponses : 25

#0 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 23/10/2013, à 17:11

ursu
Réponses : 1347

Re-

Merci turbozender pour ta réponse... .

Je me suis peut-être mal exprimé, mais je n'ai aucun problème pour W$....; c'est pour booter sur Linux que ça coince!
Merci encore, à+,
L'Ursu_

#1 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 23/10/2013, à 20:29

ursu
Réponses : 1347

Re-

turbozender a écrit :

tu as installé Win apres linux donc grub s'est fait ejecter

Non, j'ai d'abord installé W$, puis Linux.... (pas très orthodoxe comme méthode mais j'avais plus l'habitude d'utiliser W$...)
Merci pour le lien, mais j'avais déjà essayé Boot Repair, puis la manip' "chroot"... .
Par contre, lorsque je tape:

sudo os-prober

puis:

sudo update-grub

j'obtiens:

 /usr/sbin/grub-probe: error: cannot find a device for / (dev is mounted?).

Et, ça me revient, toutes les manip' tappées dans le terminal (pour placer Grub dans un sdX) se finissait chaque fois
par cette question me demandant si le périphérique était monté.... (montage/démontage que j'initiais en fonction, dans l'utilitaire de disques...)
Voilà, j'attends vos conseils, merci et bonne nuit,
L'Ursu_

#2 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 24/10/2013, à 13:22

ursu
Réponses : 1347

Bonjour à tous,

@ turbozender:
Non, je t'ai dit une connerie....; j'ai d'abord gardé ma partition Ubuntu (installée d'origine) et installé W$ à côté.
Comme j'avais à ce moment un problème avec le dual Boot, j'ai écrasé Ubuntu avec W$ et l'ancien W$ avec Voyager 12.04.... .

J'ai utilisé Boot Repair qui est dans le Live de Voyager (et même dans la Voyager fraîchement installée....)

J'aimerais être certain qu'en installant une Linux par dessus tout, ça me restaure la MBR... .
(sans perdre les fichiers NTFS...)
Merci et à bientôt,
L'Ursu_

#3 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 24/10/2013, à 19:06

ursu
Réponses : 1347

Re-

Oui, mais finalement je ne préfère pas trop... .
Ma Voyager 12.04 Live ne m'offre pas de connexion Internet et je n'arrive pas à installer le driver (téléchargé avec Windows, donc en .tar bz2)
Si je l'installe, je me retrouve bloqué... .
Donc, ce serait bien si quelqu'un pouvait trouver une petite soluce à mon problème... .
Merci quand même...
L'Ursu_

#4 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 14:58

ursu
Réponses : 1347

Bonjour à tous,

Un petit up!
Y aurait pas un pro du déchiffrage du Boot Info qui pourrait m'expliquer, en substance, d'où vient le problème?
Ça me dépannerait bien... .
Merci et bonne journée,
L'Ursu_

#5 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 16:23

ursu
Réponses : 1347

Re-

Bonjour et merci Jeanjd63...
Résultat de la commande :

sudo fdisk -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0005b42f

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   211118079   105558016    7  HPFS/NTFS/exFAT
/dev/sda2       968423424  1953523711   492550144    5  Extended
/dev/sda3       211118080   968423423   378652672    7  HPFS/NTFS/exFAT
/dev/sda5       968425472  1941702655   486638592   83  Linux
/dev/sda6      1941704704  1953523711     5909504   82  Linux swap / Solaris

Partition table entries are not in disk order

Disk /dev/sdb: 8021 MB, 8021606400 bytes
247 heads, 62 sectors/track, 1023 cylinders, total 15667200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000a07d

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          62    15666221     7833080    b  W95 FAT32
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─>

Petite question subsidiaire: quel type de programme puis-je utiliser à la place de gedit?
(qui n'est pas disponible dans mon Live Voyager...)

Voilà, à+ et merci!
L'Ursu_

#6 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 17:32

ursu
Réponses : 1347

Re-

Merci beaucoup jeanjd63, je teste tout ça dans la soirée et je reviens illico... .
A+, bon appétit,
L'Ursu_

#7 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 18:13

ursu
Réponses : 1347

Re-

@ jeanjd63
Bien; j'ai tapé toutes les commandes et ce, sans erreur ni problème... .
Mais, au reboot, je tombe à nouveau sur W$... .
J'ai recommencé, en changeant le flag dans GParted et même résultat.
Aurais-je loupé quelque chose?
Merci encore,
L'Ursu_

#8 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 18:47

ursu
Réponses : 1347

Re-

OK, voici le rapport en question:

            Boot Info Script 0.61-git-patched      [23 April 2012]


============================= Boot Info Summary: ===============================

 => Windows is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda6: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20120131
    Boot sector info:  Syslinux looks at sector 9980720 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /efi/boot/bootx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   211,118,079   211,116,032   7 NTFS / exFAT / HPFS
/dev/sda2         968,423,424 1,953,523,711   985,100,288   5 Extended
/dev/sda5         968,425,472 1,941,702,655   973,277,184  83 Linux
/dev/sda6       1,941,704,704 1,953,523,711    11,819,008  82 Linux swap / Solaris
/dev/sda3         211,118,080   968,423,423   757,305,344   7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 8021 MB, 8021606400 bytes
247 heads, 62 sectors/track, 1023 cylinders, total 15667200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             62    15,666,221    15,666,160   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        017B5D445BC24510                       ntfs       
/dev/sda3        563493E403C468B3                       ntfs       
/dev/sda5        8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3   ext4       
/dev/sda6        027f7c56-8f6d-4639-8f3c-7a436b33c00f   swap       
/dev/sdb1        D876-C175                              vfat       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod efi_gop
  insmod efi_uga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos5)'
  search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
  set locale_dir=($root)/boot/grub/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="$1"
	if [ "$1" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
	echo	'Loading Linux 3.2.0-23-generic ...'
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda5 during installation
UUID=8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=027f7c56-8f6d-4639-8f3c-7a436b33c00f none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 883.919925690 = 949.101793280  boot/grub/grub.cfg                             2
 462.420925140 = 496.520687616  boot/initrd.img-3.2.0-23-generic               2
 883.914775848 = 949.096263680  boot/vmlinuz-3.2.0-23-generic                  1
 462.420925140 = 496.520687616  initrd.img                                     2
 883.914775848 = 949.096263680  vmlinuz                                        1

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Xubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Xubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/xubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             ldlinux.sys                                    1
            ?? = ??             syslinux/chain.c32                             1
            ?? = ??             syslinux/gfxboot.c32                           1
            ?? = ??             syslinux/syslinux.cfg                          1
            ?? = ??             syslinux/vesamenu.c32                          1

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)


ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-10-25__20h35 ===================
boot-repair version : 3.18-0ppa7~precise
boot-sav version : 3.18-0ppa7~precise
glade2script version : 0.3.2.1-0ppa7~precise
internet: no-internet
boot-repair is executed in live-session (Ubuntu 12.04 LTS , precise , Ubuntu , x86_64)

=================== OSPROBER:
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sda5:Ubuntu 12.04 LTS (12.04):Ubuntu:linux

=================== BLKID:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="017B5D445BC24510" TYPE="ntfs"
/dev/sda3: UUID="563493E403C468B3" TYPE="ntfs"
/dev/sda5: UUID="8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3" TYPE="ext4"
/dev/sda6: UUID="027f7c56-8f6d-4639-8f3c-7a436b33c00f" TYPE="swap"
/dev/sdb1: UUID="D876-C175" TYPE="vfat"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.


=================== /mnt/boot-sav/sda5/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== dmesg | grep EFI :
[    0.000000] EFI v2.31 by INSYDE Corp.
[    0.000000] Kernel-defined memdesc doesn't match the one from EFI!
[    0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[    0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB)
[    0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[    0.000000] EFI: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[    0.000000] EFI: mem04: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[    0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[    0.000000] EFI: mem06: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006f000) (0MB)
[    0.000000] EFI: mem07: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[    0.000000] EFI: mem08: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[    0.000000] EFI: mem09: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[    0.000000] EFI: mem10: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005b9000) (4MB)
[    0.000000] EFI: mem11: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB)
[    0.000000] EFI: mem12: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[    0.000000] EFI: mem13: type=7, attr=0xf, range=[0x0000000020200000-0x0000000036008000) (350MB)
[    0.000000] EFI: mem14: type=2, attr=0xf, range=[0x0000000036008000-0x0000000036ffc000) (15MB)
[    0.000000] EFI: mem15: type=7, attr=0xf, range=[0x0000000036ffc000-0x0000000040004000) (144MB)
[    0.000000] EFI: mem16: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[    0.000000] EFI: mem17: type=7, attr=0xf, range=[0x0000000040005000-0x0000000068c13000) (652MB)
[    0.000000] EFI: mem18: type=2, attr=0xf, range=[0x0000000068c13000-0x000000008e6c0000) (602MB)
[    0.000000] EFI: mem19: type=4, attr=0xf, range=[0x000000008e6c0000-0x000000008e6e0000) (0MB)
[    0.000000] EFI: mem20: type=7, attr=0xf, range=[0x000000008e6e0000-0x0000000090f24000) (40MB)
[    0.000000] EFI: mem21: type=4, attr=0xf, range=[0x0000000090f24000-0x00000000916b0000) (7MB)
[    0.000000] EFI: mem22: type=7, attr=0xf, range=[0x00000000916b0000-0x0000000091857000) (1MB)
[    0.000000] EFI: mem23: type=1, attr=0xf, range=[0x0000000091857000-0x00000000918bf000) (0MB)
[    0.000000] EFI: mem24: type=7, attr=0xf, range=[0x00000000918bf000-0x0000000096fbc000) (86MB)
[    0.000000] EFI: mem25: type=4, attr=0xf, range=[0x0000000096fbc000-0x00000000973cf000) (4MB)
[    0.000000] EFI: mem26: type=7, attr=0xf, range=[0x00000000973cf000-0x00000000973d0000) (0MB)
[    0.000000] EFI: mem27: type=4, attr=0xf, range=[0x00000000973d0000-0x00000000978b8000) (4MB)
[    0.000000] EFI: mem28: type=7, attr=0xf, range=[0x00000000978b8000-0x0000000097a4f000) (1MB)
[    0.000000] EFI: mem29: type=4, attr=0xf, range=[0x0000000097a4f000-0x0000000097a7e000) (0MB)
[    0.000000] EFI: mem30: type=7, attr=0xf, range=[0x0000000097a7e000-0x0000000097a85000) (0MB)
[    0.000000] EFI: mem31: type=4, attr=0xf, range=[0x0000000097a85000-0x0000000097ab0000) (0MB)
[    0.000000] EFI: mem32: type=7, attr=0xf, range=[0x0000000097ab0000-0x0000000097ab1000) (0MB)
[    0.000000] EFI: mem33: type=4, attr=0xf, range=[0x0000000097ab1000-0x0000000097f14000) (4MB)
[    0.000000] EFI: mem34: type=7, attr=0xf, range=[0x0000000097f14000-0x0000000097f15000) (0MB)
[    0.000000] EFI: mem35: type=4, attr=0xf, range=[0x0000000097f15000-0x0000000097f88000) (0MB)
[    0.000000] EFI: mem36: type=7, attr=0xf, range=[0x0000000097f88000-0x0000000097f89000) (0MB)
[    0.000000] EFI: mem37: type=4, attr=0xf, range=[0x0000000097f89000-0x0000000097fc1000) (0MB)
[    0.000000] EFI: mem38: type=7, attr=0xf, range=[0x0000000097fc1000-0x0000000097fc7000) (0MB)
[    0.000000] EFI: mem39: type=4, attr=0xf, range=[0x0000000097fc7000-0x0000000097fd1000) (0MB)
[    0.000000] EFI: mem40: type=7, attr=0xf, range=[0x0000000097fd1000-0x0000000097fd2000) (0MB)
[    0.000000] EFI: mem41: type=4, attr=0xf, range=[0x0000000097fd2000-0x0000000097ffc000) (0MB)
[    0.000000] EFI: mem42: type=7, attr=0xf, range=[0x0000000097ffc000-0x0000000097ffe000) (0MB)
[    0.000000] EFI: mem43: type=4, attr=0xf, range=[0x0000000097ffe000-0x00000000981bb000) (1MB)
[    0.000000] EFI: mem44: type=7, attr=0xf, range=[0x00000000981bb000-0x00000000981be000) (0MB)
[    0.000000] EFI: mem45: type=4, attr=0xf, range=[0x00000000981be000-0x00000000981c1000) (0MB)
[    0.000000] EFI: mem46: type=7, attr=0xf, range=[0x00000000981c1000-0x00000000981c3000) (0MB)
[    0.000000] EFI: mem47: type=4, attr=0xf, range=[0x00000000981c3000-0x00000000985da000) (4MB)
[    0.000000] EFI: mem48: type=7, attr=0xf, range=[0x00000000985da000-0x00000000985e3000) (0MB)
[    0.000000] EFI: mem49: type=4, attr=0xf, range=[0x00000000985e3000-0x0000000098604000) (0MB)
[    0.000000] EFI: mem50: type=7, attr=0xf, range=[0x0000000098604000-0x0000000098605000) (0MB)
[    0.000000] EFI: mem51: type=4, attr=0xf, range=[0x0000000098605000-0x000000009860c000) (0MB)
[    0.000000] EFI: mem52: type=7, attr=0xf, range=[0x000000009860c000-0x000000009860d000) (0MB)
[    0.000000] EFI: mem53: type=4, attr=0xf, range=[0x000000009860d000-0x00000000998bf000) (18MB)
[    0.000000] EFI: mem54: type=7, attr=0xf, range=[0x00000000998bf000-0x0000000099d12000) (4MB)
[    0.000000] EFI: mem55: type=2, attr=0xf, range=[0x0000000099d12000-0x0000000099d18000) (0MB)
[    0.000000] EFI: mem56: type=3, attr=0xf, range=[0x0000000099d18000-0x000000009a0bf000) (3MB)
[    0.000000] EFI: mem57: type=5, attr=0x800000000000000f, range=[0x000000009a0bf000-0x000000009a4bf000) (4MB)
[    0.000000] EFI: mem58: type=6, attr=0x800000000000000f, range=[0x000000009a4bf000-0x000000009a6bf000) (2MB)
[    0.000000] EFI: mem59: type=0, attr=0xf, range=[0x000000009a6bf000-0x000000009aebf000) (8MB)
[    0.000000] EFI: mem60: type=10, attr=0xf, range=[0x000000009aebf000-0x000000009afbf000) (1MB)
[    0.000000] EFI: mem61: type=9, attr=0xf, range=[0x000000009afbf000-0x000000009afff000) (0MB)
[    0.000000] EFI: mem62: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
[    0.000000] EFI: mem63: type=7, attr=0xf, range=[0x0000000100000000-0x00000001df600000) (3574MB)
[    0.000000] EFI: mem64: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[    0.000000] EFI: mem65: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
[    0.000000] EFI: mem66: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] EFI: mem67: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[    0.000000] EFI: mem68: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] EFI: mem69: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[    0.000000] EFI: mem70: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] EFI: mem71: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] EFI: mem72: type=11, attr=0x8000000000000000, range=[0x00000000ffd80000-0x0000000100000000) (2MB)
[    0.000000] ACPI: UEFI 000000009affd000 00236 (v01 HPQOEM 1970     00000001 HP   00040000)
[    7.049570] fb0: EFI VGA frame buffer device
[    7.345352] EFI Variables Facility v0.08 2004-May-17
[    8.791607] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not-on-gpt-disk,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	no-grldr,	Boot/BCD,	nopakmgr,	nogrubinstall,	/mnt/boot-sav/sda1.
sda3	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not-on-gpt-disk,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	no-grldr,	no-b-bcd,	nopakmgr,	nogrubinstall,	/mnt/boot-sav/sda3.
sda5	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-efi,	update-grub,	64,	with-boot,	is-os,	not-on-gpt-disk,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	no-grldr,	no-b-bcd,	apt-get,	grub-install,	/mnt/boot-sav/sda5.

sda	: MSDos,	not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	2048 sectors * 512 bytes

=================== PARTED:

Model: ATA ST1000LM024 HN-M (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      1049kB  108GB   108GB   primary   ntfs            boot
3      108GB   496GB   388GB   primary   ntfs
2      496GB   1000GB  504GB   extended
5      496GB   994GB   498GB   logical   ext4
6      994GB   1000GB  6051MB  logical   linux-swap(v1)


Model: Kingston DT 101 II (scsi)
Disk /dev/sdb: 8022MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      31.7kB  8021MB  8021MB  primary  fat32        boot


=================== MOUNT:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
gvfs-fuse-daemon on /home/xubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=xubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)


/sys/block/sda:  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb:  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0:  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev:  agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 v4l vga_arbiter video0 zero
/dev/mapper:  control

=================== DF:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  2.9G  143M  2.8G   5% /
udev           devtmpfs   2.9G   12K  2.9G   1% /dev
tmpfs          tmpfs      1.2G  816K  1.2G   1% /run
/dev/sdb1      vfat       7.5G  6.2G  1.4G  83% /cdrom
/dev/loop0     squashfs   923M  923M     0 100% /rofs
tmpfs          tmpfs      2.9G   24K  2.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      2.9G   84K  2.9G   1% /run/shm
/dev/sda1      fuseblk    101G   56G   46G  55% /mnt/boot-sav/sda1
/dev/sda3      fuseblk    362G   11G  351G   3% /mnt/boot-sav/sda3
/dev/sda5      ext4       464G  9.9G  431G   3% /mnt/boot-sav/sda5

=================== FDISK:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0005b42f

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   211118079   105558016    7  HPFS/NTFS/exFAT
/dev/sda2       968423424  1953523711   492550144    5  Extended
/dev/sda3       211118080   968423423   378652672    7  HPFS/NTFS/exFAT
/dev/sda5       968425472  1941702655   486638592   83  Linux
/dev/sda6      1941704704  1953523711     5909504   82  Linux swap / Solaris

Partition table entries are not in disk order

Disk /dev/sdb: 8021 MB, 8021606400 bytes
247 heads, 62 sectors/track, 1023 cylinders, total 15667200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000a07d

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          62    15666221     7833080    b  W95 FAT32



=================== Before mainwindow
FSCK no PASTEBIN yes WUBI no WINBOOT no
recommendedrepair, purge, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge
UNHIDEBOOT_ACTION yes (10s), noflag (sda1)
PART_TO_REINSTALL_GRUB sda5, FORCE_GRUB no (sda) REMOVABLEDISK no
USE_SEPARATEBOOTPART no (sda3) grub2 ()
UNCOMMENT_GFXMODE no ATA  ADD_KERNEL_OPTION no (acpi=off)
MBR_TO_RESTORE  ( )

=================== Actions
FSCK no PASTEBIN yes WUBI no WINBOOT no
bootinfo, nombraction, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge
UNHIDEBOOT_ACTION no (10s), noflag (sda1)
PART_TO_REINSTALL_GRUB sda5, FORCE_GRUB no (sda) REMOVABLEDISK no
USE_SEPARATEBOOTPART no (sda3) grub2 ()
UNCOMMENT_GFXMODE no ATA  ADD_KERNEL_OPTION no (acpi=off)
MBR_TO_RESTORE  ( )
No change has been performed on your computer. See you soon!
internet: no-internet
internet: no-internet

Merci à toi....,
L'Ursu_

#9 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 20:26

ursu
Réponses : 1347

Re-

Je viens de recevoir ton complément d'instructions...
Après ta dernière question, j'ai tout retapé et, en effet, il y a un petit message bizarre après "update-grub":

┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  mount  --bind  /dev  /mnt/dev
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  mount  --bind  /proc  /mnt/proc
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  chroot  /mnt
root@xubuntu:/# update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.2.0-23-generic
Found initrd image: /boot/initrd.img-3.2.0-23-generic
Found memtest86+ image: /boot/memtest86+.bin
Cannot find list of partitions!  (Try mounting /sys.)
done
root@xubuntu:/# grub-install  /dev/sda
Installation finished. No error reported.
root@xubuntu:/# 

Je tente ta manip', merci!
A+,
L'Ursu_

#10 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 20:51

ursu
Réponses : 1347

Re-

J'ai installé EasyBCD, mais comme c'est la première fois que je l'utilise, je préfère te demander avant de faire une connerie... .
Dans la section "Editer le menu de démarrage", on ne trouve que W$ 7...
Par contre, dans "Déployer la BCD", je peux désigner ma partition Linux et ainsi "installer la BCD"...
C'est bien cette dernière option que je dois prendre?
Merci, à +,
L'Ursu_

#11 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 21:09

ursu
Réponses : 1347

Re-

Il y a bien cette fonction dont je parlais...; je peux sélectionner ma partition "Partition 3 (Linux-364Gio)", mais lorsque je
clique sur "installer la BCD", j'ai un message d'erreur m'indiquant que "La partition de démarrage doit être une partition primaire",
me conseille de changer de disque ou de convertir ma partition en primaire... .
Ça te dit quelque chose?
Merci,
L'Ursu_

#12 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 21:38

ursu
Réponses : 1347

Re-

jeanjd63 a écrit :

Non il doit y avoir une option qui permet d'ajouter un système au menu de démarrage. Ce que tu tentes là c'est de créer un nouvel environnement de démarrage.

Oui, en effet, je n'étais pas dans la bonne section...
J'ai depuis désigné ma partition Linux dans "ajouter une nouvelle entrée"; au reboot, je me retrouve bien avec deux options de boot,
mais pour Linux, ça boote sur rien (petit curseur clignotant....)
Maintenant, dans "ajouter une nouvelle entrée", une section "type" est à renseigner, avec comme choix:
_Grub (Ancien), Grub 2, Lilo/eLILO, FreeBSD/PC-BSD, Wubi, SysLinux
J'ai essayé avec les deux premiers et j'obtiens donc le curseur clignotant...
Bon, y a déjà du mieux, non?
Merci,
L'Ursu_

#13 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 25/10/2013, à 22:06

ursu
Réponses : 1347

Re-

Voilà, j'ai effectué tes dernières commandes préconisées:

┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  mount  /dev/sda5  /mnt
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  mount  --bind  /dev  /mnt/dev
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  mount  --bind  /proc  /mnt/proc
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  chroot  /mnt
root@xubuntu:/# apt-get  purge  grub-pc
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Virtual packages like 'grub-pc' can't be removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@xubuntu:/# apt-get  install  grub-pc
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package grub-pc is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  grub-efi-amd64 grub2-common grub-common

E: Package 'grub-pc' has no installation candidate
root@xubuntu:/# update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.2.0-23-generic
Found initrd image: /boot/initrd.img-3.2.0-23-generic
Found memtest86+ image: /boot/memtest86+.bin
Cannot find list of partitions!  (Try mounting /sys.)
done
root@xubuntu:/# grub-install --force  /dev/sda5
Installation finished. No error reported.
root@xubuntu:/# 

Après le choix Linux au boot, je tombe sur un bash, avec grub> en début de ligne... .
Tu penses qu'il serait mieux de ré-installer Voyager?
Autre chose, dans le choix "Disque" d'EasyBCD, je trouve Partition 3 (Linux 464Gio) et non deux partitions différentes
(sda 5 et sda 6), c'est normal?

Encore merci pour ta patience et ton aide...
L'Ursu_

#14 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 26/10/2013, à 06:08

ursu
Réponses : 1347

Bonjour à tous!

Salute jeanjd63...

jeanjd63 a écrit :

   
         Non ce n'est pas la partition /dev/sda3 qu'il faut choisir dans EasyBcd mais la partition /dev/sda5.

Je sais...., mais malheureusement, l'interface ne me laisse pas le choix! Je n'ai que: Partition 3 ((Linux 464Gio)
J'ai ré-installé Voyager 12.04, mais aucun changement... .
Enfin, en Live et avec Gparted, j'ai tenté de supprimer sda 3 mais j'ai un message d'erreur: "Daemon is inhibited"

Je te remercie, à+
L'Ursu_

#15 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 26/10/2013, à 09:38

ursu
Réponses : 1347

Re-

Par contre as-tu bien décoché la case GRUB isn't installed to the bootsector ?

Je n'ai pas trouvé cette case..., désolé... .
Je te renvoie la commande préconisée...
Merci, à +,
L'Ursu_

#16 Re : -1 »  [Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic ! » Le 26/10/2013, à 09:53

ursu
Réponses : 1347

Re-

Tu as raison, je m'y atèle...
[Grub après installation Windows], ça conviendrait?
Merci,
L'Ursu_

#17 Re : -1 »  Avis utilisateurs Clementine Player » Le 02/01/2014, à 11:23

ursu
Réponses : 7

Bonjour à tous!
Bonne année!

Je rebondis justement sur ce post car j'ai un gros problème avec Clementine; j'ai recherché un peu partout mais pour l'instant je reste bredouille... .
Il n'arrive pas à lire les .ogg; les titres s'affichent bien dans la liste de lecture mais après double-clic, ils se grisent (message Clementine interrompu) et
la lecture commence au premier titre en .mp3. Un problème de Codec? Il n'y aucun réglage de codage dans les Préférences...., je bloque!
J'aimerais le garder car il s'intègre aussi bien à Gnome qu'à KDE... .
Merci pour votre aide et bonne journée!
L'Ursu_

Désolé, tout venait de moi... . Des .m3u (petits fichiers) transcrits en .ogg dans Clémentine! Normal qu'il ne puisse pas les lire!

#18 Re : -1 »  kubuntu kde en francais quelqun peut m aider svp » Le 02/01/2014, à 12:22

ursu
Réponses : 8

Bonjour à tous!
Bonne année!

Trop drôle les interférences-clavier!

Sérieusement, toujours aussi utile et d'actualité ce:

sudo apt-get install kde-l10n-fr

Ça a encore fonctionné aujourd'hui... .
Étonnant que ce ne soit pas inclus dans les paquets originaux, non?
Merci pour l'aide... .
L'Ursu_

#19 -1 »  Grub après installation Windows » Le 26/10/2013, à 10:11

ursu
Réponses : 9

Bonjour à tous,

Ce post a été commencé dans la section "[Boot-Repair] Réparer le démarrage du PC (GRUB, MBR) en 1 clic !", post #1055

En vacances à la Réunion (j'ai de la chance..., oui je sais!), j'ai décidé d'acheter un portable Pavilion équipé d'Ubuntu 12.04 LTS;
déçu par le manque de certains drivers, plus une VirtualBox déficiente, je décide d'installer un W$ 7 de dépannage et capable d'héberger CartoExplorer (randos obligent...)
Et paf, bien sûr, la MBR est touchée par la manip' et impossible de booter sur une Voyager 12.04 installée à la suite... .
J'ai essayé plusieurs manip' avec Boot Repair mais niet...!
D'autres options sont proposées mais j'ai peur de griller totalement la MBR et de plus avoir accès à W$....

Voici le fichier:

 Boot Info Script 0.61-git-patched      [23 April 2012]


============================= Boot Info Summary: ===============================

 => 
Windows is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb



sda1: __________________________________________________________________________

    
File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    
Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe



sda2: __________________________________________________________________________

    
File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 



sda5: __________________________________________________________________________

    
File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04 LTS
   
Boot files:        /boot/grub/grub.cfg /etc/fstab



sda6: __________________________________________________________________________

    
File system:       swap
    Boot sector type:  -
    Boot sector info: 


sda3: __________________________________________________________________________

   
File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot 

Parameter Block.
    Operating System:  
    Boot files:       

 

sdb1: __________________________________________________________________________

   
File system:       vfat
    Boot sector type:  SYSLINUX 

4.05 20120131
    Boot sector info:  Syslinux looks at sector 9980720 of /dev/sdb1 for its second stage. 
SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
   
Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       
/efi/boot/bootx64.efi /ldlinux.sys

============================

 Drive/Partition Info: 

=============================


Drive: sda _____________________________________________________________________


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 

sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   211,118,079   211,116,032   7 NTFS / exFAT / HPFS
/dev/sda2         968,423,424 1,953,523,711   985,100,288   5 Extended
/dev/sda5         968,425,472 1,941,702,655   973,277,184  83 

Linux
/dev/sda6       1,941,704,704 1,953,523,711    11,819,008  82 Linux swap / Solaris
/dev/sda3         211,118,080   968,423,423   757,305,344   7 NTFS / exFAT / HPFS


Drive: sdb 

_____________________________________________________________________


Disk /dev/sdb: 8021 MB, 8021606400 bytes
247 heads, 62 sectors/track, 1023 cylinders, total 15667200 sectors
Units = sectors 

of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             62    15,666,221    15,666,160   b W95 FAT32


"blkid" 

output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        

017B5D445BC24510                       ntfs       
/dev/sda3        563493E403C468B3                       ntfs       
/dev/sda5        8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3   ext4       
/dev/sda6        027f7c56-8f6d-4639-

8f3c-7a436b33c00f   swap       
/dev/sdb1        D876-C175                              vfat      
 

================================ Mount points: =================================

Device           

Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-

1,shortname=mixed,errors=remount-ro)


=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from 

/etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  

save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function 

recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod efi_gop
  insmod efi_uga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  

insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos5)'
  search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
  set locale_dir=($root)/boot/grub/locale
  set lang=fr_FR
  

insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set 

menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="$1"
	if [ "$1" = "keep" 

]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; 

then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export 

linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	

insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
	linux	/boot/vmlinuz-

3.2.0-23-generic root=UUID=8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-23-generic (mode de 

dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 

8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
	echo	'Chargement de Linux 3.2.0-23-generic ...'
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3 ro recovery 

nomodeset 
	echo	'Chargement du disque mémoire initial ...'
	initrd	/boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END 

/etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-

floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	

insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### 

END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
	insmod part_msdos
	insmod ntfs
	set 

root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root 017B5D445BC24510
	chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy 

way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN 

/etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system 

information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file 

system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda5 during installation
UUID=8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3 /   

            ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=027f7c56-8f6d-4639-8f3c-7a436b33c00f none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                      

           Fragment(s)

 779.939758301 = 837.453938688  boot/grub/grub.cfg                             1
 462.420925140 = 496.520687616  boot/initrd.img-3.2.0-23-generic               2
 883.914775848 = 949.096263680  

boot/vmlinuz-3.2.0-23-generic                  1
 462.420925140 = 496.520687616  initrd.img                                     2
 883.914775848 = 949.096263680  vmlinuz                                        1

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; 

then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry 

"Try Xubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Xubuntu" {
	set 

gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/xubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set 

gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include 

menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: 

====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by 

Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             ldlinux.sys                                    1
            ?? = ??             syslinux/chain.c32                             

1
            ?? = ??             syslinux/gfxboot.c32                           1
            ?? = ??             syslinux/syslinux.cfg                          1
            ?? = ??             syslinux/vesamenu.c32                          1

============== sdb1: 

Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  

COM32R module (v4.xx)


ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-10-23__17h14 ===================
boot-repair version : 3.18-0ppa7~precise
boot-sav version : 

3.18-0ppa7~precise
glade2script version : 0.3.2.1-0ppa7~precise
internet: no-internet
boot-repair is executed in live-session (Ubuntu 12.04 LTS , precise , Ubuntu , x86_64)

=================== OSPROBER:
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sda5:Ubuntu 12.04 LTS (12.04):Ubuntu:linux

=================== BLKID:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="017B5D445BC24510" TYPE="ntfs"
/dev/sda3: UUID="563493E403C468B3" TYPE="ntfs"
/dev/sda5: UUID="8e02ddbe-51c8-43c9-a5cd-22cc276ba0f3" TYPE="ext4"
/dev/sda6: UUID="027f7c56-8f6d-4639-8f3c-7a436b33c00f" TYPE="swap"
/dev/sdb1: UUID="D876-C175" TYPE="vfat"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret 

the contents differently.


=================== /mnt/boot-sav/sda5/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this 

file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> 

/dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch 

required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable 

graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB 

with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable 

generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== dmesg | grep EFI :
[    

0.000000] EFI v2.31 by INSYDE Corp.
[    0.000000] Kernel-defined memdesc doesn't match the one from EFI!
[    0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) 

(0MB)
[    0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB)
[    0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) 

(0MB)
[    0.000000] EFI: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[    0.000000] EFI: mem04: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) 

(0MB)
[    0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[    0.000000] EFI: mem06: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006f000) 

(0MB)
[    0.000000] EFI: mem07: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[    0.000000] EFI: mem08: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) 

(0MB)
[    0.000000] EFI: mem09: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[    0.000000] EFI: mem10: type=2, attr=0xf, range=[0x0000000000100000-

0x00000000005b9000) (4MB)
[    0.000000] EFI: mem11: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB)
[    0.000000] EFI: mem12: type=0, attr=0xf, range=

[0x0000000020000000-0x0000000020200000) (2MB)
[    0.000000] EFI: mem13: type=7, attr=0xf, range=[0x0000000020200000-0x0000000036008000) (350MB)
[    0.000000] EFI: mem14: type=2, attr=0xf, 

range=[0x0000000036008000-0x0000000036ffc000) (15MB)
[    0.000000] EFI: mem15: type=7, attr=0xf, range=[0x0000000036ffc000-0x0000000040004000) (144MB)
[    0.000000] EFI: mem16: type=0, 

attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[    0.000000] EFI: mem17: type=7, attr=0xf, range=[0x0000000040005000-0x0000000068c13000) (652MB)
[    0.000000] EFI: mem18: 

type=2, attr=0xf, range=[0x0000000068c13000-0x000000008e6c0000) (602MB)
[    0.000000] EFI: mem19: type=4, attr=0xf, range=[0x000000008e6c0000-0x000000008e6e0000) (0MB)
[    0.000000] EFI: 

mem20: type=7, attr=0xf, range=[0x000000008e6e0000-0x0000000090f24000) (40MB)
[    0.000000] EFI: mem21: type=4, attr=0xf, range=[0x0000000090f24000-0x00000000916b0000) (7MB)
[    0.000000] EFI: 

mem22: type=7, attr=0xf, range=[0x00000000916b0000-0x0000000091857000) (1MB)
[    0.000000] EFI: mem23: type=1, attr=0xf, range=[0x0000000091857000-0x00000000918bf000) (0MB)
[    0.000000] EFI: 

mem24: type=7, attr=0xf, range=[0x00000000918bf000-0x0000000096fbc000) (86MB)
[    0.000000] EFI: mem25: type=4, attr=0xf, range=[0x0000000096fbc000-0x00000000973cf000) (4MB)
[    0.000000] EFI: 

mem26: type=7, attr=0xf, range=[0x00000000973cf000-0x00000000973d0000) (0MB)
[    0.000000] EFI: mem27: type=4, attr=0xf, range=[0x00000000973d0000-0x00000000978b8000) (4MB)
[    0.000000] EFI: 

mem28: type=7, attr=0xf, range=[0x00000000978b8000-0x0000000097a4e000) (1MB)
[    0.000000] EFI: mem29: type=4, attr=0xf, range=[0x0000000097a4e000-0x0000000097a7d000) (0MB)
[    0.000000] EFI: 

mem30: type=7, attr=0xf, range=[0x0000000097a7d000-0x0000000097a85000) (0MB)
[    0.000000] EFI: mem31: type=4, attr=0xf, range=[0x0000000097a85000-0x0000000097f14000) (4MB)
[    0.000000] EFI: 

mem32: type=7, attr=0xf, range=[0x0000000097f14000-0x0000000097f15000) (0MB)
[    0.000000] EFI: mem33: type=4, attr=0xf, range=[0x0000000097f15000-0x0000000097f86000) (0MB)
[    0.000000] EFI: 

mem34: type=7, attr=0xf, range=[0x0000000097f86000-0x0000000097f87000) (0MB)
[    0.000000] EFI: mem35: type=4, attr=0xf, range=[0x0000000097f87000-0x0000000097fc1000) (0MB)
[    0.000000] EFI: 

mem36: type=7, attr=0xf, range=[0x0000000097fc1000-0x0000000097fc7000) (0MB)
[    0.000000] EFI: mem37: type=4, attr=0xf, range=[0x0000000097fc7000-0x0000000097fd1000) (0MB)
[    0.000000] EFI: 

mem38: type=7, attr=0xf, range=[0x0000000097fd1000-0x0000000097fd2000) (0MB)
[    0.000000] EFI: mem39: type=4, attr=0xf, range=[0x0000000097fd2000-0x0000000097ffc000) (0MB)
[    0.000000] EFI: 

mem40: type=7, attr=0xf, range=[0x0000000097ffc000-0x0000000097ffe000) (0MB)
[    0.000000] EFI: mem41: type=4, attr=0xf, range=[0x0000000097ffe000-0x00000000981bb000) (1MB)
[    0.000000] EFI: 

mem42: type=7, attr=0xf, range=[0x00000000981bb000-0x00000000981be000) (0MB)
[    0.000000] EFI: mem43: type=4, attr=0xf, range=[0x00000000981be000-0x00000000981c1000) (0MB)
[    0.000000] EFI: 

mem44: type=7, attr=0xf, range=[0x00000000981c1000-0x00000000981c3000) (0MB)
[    0.000000] EFI: mem45: type=4, attr=0xf, range=[0x00000000981c3000-0x0000000098271000) (0MB)
[    0.000000] EFI: 

mem46: type=7, attr=0xf, range=[0x0000000098271000-0x0000000098272000) (0MB)
[    0.000000] EFI: mem47: type=4, attr=0xf, range=[0x0000000098272000-0x00000000985da000) (3MB)
[    0.000000] EFI: 

mem48: type=7, attr=0xf, range=[0x00000000985da000-0x00000000985e3000) (0MB)
[    0.000000] EFI: mem49: type=4, attr=0xf, range=[0x00000000985e3000-0x0000000098604000) (0MB)
[    0.000000] EFI: 

mem50: type=7, attr=0xf, range=[0x0000000098604000-0x0000000098605000) (0MB)
[    0.000000] EFI: mem51: type=4, attr=0xf, range=[0x0000000098605000-0x000000009860c000) (0MB)
[    0.000000] EFI: 

mem52: type=7, attr=0xf, range=[0x000000009860c000-0x000000009860d000) (0MB)
[    0.000000] EFI: mem53: type=4, attr=0xf, range=[0x000000009860d000-0x00000000998bf000) (18MB)
[    0.000000] 

EFI: mem54: type=7, attr=0xf, range=[0x00000000998bf000-0x0000000099d12000) (4MB)
[    0.000000] EFI: mem55: type=2, attr=0xf, range=[0x0000000099d12000-0x0000000099d18000) (0MB)
[    0.000000] 

EFI: mem56: type=3, attr=0xf, range=[0x0000000099d18000-0x000000009a0bf000) (3MB)
[    0.000000] EFI: mem57: type=5, attr=0x800000000000000f, range=[0x000000009a0bf000-0x000000009a4bf000) 

(4MB)
[    0.000000] EFI: mem58: type=6, attr=0x800000000000000f, range=[0x000000009a4bf000-0x000000009a6bf000) (2MB)
[    0.000000] EFI: mem59: type=0, attr=0xf, range=[0x000000009a6bf000-

0x000000009aebf000) (8MB)
[    0.000000] EFI: mem60: type=10, attr=0xf, range=[0x000000009aebf000-0x000000009afbf000) (1MB)
[    0.000000] EFI: mem61: type=9, attr=0xf, range=[0x000000009afbf000-

0x000000009afff000) (0MB)
[    0.000000] EFI: mem62: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
[    0.000000] EFI: mem63: type=7, attr=0xf, range=[0x0000000100000000-

0x00000001df600000) (3574MB)
[    0.000000] EFI: mem64: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[    0.000000] EFI: mem65: type=0, attr=0x0, range=

[0x000000009b000000-0x000000009fa00000) (74MB)
[    0.000000] EFI: mem66: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] EFI: mem67: 

type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[    0.000000] EFI: mem68: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-

0x00000000fec01000) (0MB)
[    0.000000] EFI: mem69: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[    0.000000] EFI: mem70: type=11, 

attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] EFI: mem71: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) 

(0MB)
[    0.000000] EFI: mem72: type=11, attr=0x8000000000000000, range=[0x00000000ffd80000-0x0000000100000000) (2MB)
[    0.000000] ACPI: UEFI 000000009affd000 00236 (v01 HPQOEM 1970     

00000001 HP   00040000)
[    5.572764] fb0: EFI VGA frame buffer device
[    5.864445] EFI Variables Facility v0.08 2004-May-17
[    7.302831] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic 

driver


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not-

on-gpt-disk,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	no-grldr,	Boot/BCD,	nopakmgr,	nogrubinstall,	/mnt/boot-sav/sda1.
sda3	: sda,	

maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not-on-gpt-disk,	part-has-no-fstab,	no-nt,	no-winload,	no-

recov-nor-hid,	no-bmgr,	no-grldr,	no-b-bcd,	nopakmgr,	nogrubinstall,	/mnt/boot-sav/sda3.
sda5	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-efi,	update-grub,	

64,	with-boot,	is-os,	not-on-gpt-disk,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	no-grldr,	no-b-bcd,	apt-get,	grub-install,	/mnt/boot-

sav/sda5.

sda	: MSDos,	not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	2048 sectors * 512 bytes

=================== PARTED:

Model: ATA ST1000LM024 HN-M (scsi)
Disk /dev/sda: 

1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      1049kB  108GB   108GB   primary   ntfs            boot
3      108GB   496GB   

388GB   primary   ntfs
2      496GB   1000GB  504GB   extended
5      496GB   994GB   498GB   logical   ext4
6      994GB   1000GB  6051MB  logical   linux-swap(v1)


Model: Kingston DT 101 II (scsi)
Disk /dev/sdb: 

8022MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      31.7kB  8021MB  8021MB  primary  fat32        boot


=================== 

MOUNT:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts 

(rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-

1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type 

securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
gvfs-fuse-daemon on /home/xubuntu/.gvfs type 

fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=xubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk 

(rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)


/sys/block/sda:  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range 

holders inflight power queue range removable ro sda1 sda2 sda3 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb:  alignment_offset bdi capability dev device discard_alignment events events_async 

events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0:  alignment_offset bdi capability dev device discard_alignment events events_async 

events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev:  agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency 

disk dri dvd dvdrw ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 

sda5 sda6 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 v4l vga_arbiter video0 zero
/dev/mapper:  control

=================== DF:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  2.9G  144M  2.8G   5% /
udev           devtmpfs   2.9G   12K  2.9G   1% /dev
tmpfs          tmpfs      1.2G  824K  1.2G   1% /run
/dev/sdb1  

    vfat       7.5G  6.2G  1.4G  83% /cdrom
/dev/loop0     squashfs   923M  923M     0 100% /rofs
tmpfs          tmpfs      2.9G   24K  2.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs   

   2.9G   84K  2.9G   1% /run/shm
/dev/sda1      fuseblk    101G   52G   50G  52% /mnt/boot-sav/sda1
/dev/sda3      fuseblk    362G  9.7G  352G   3% /mnt/boot-sav/sda3
/dev/sda5      ext4       464G  9.9G  431G   3% 

/mnt/boot-sav/sda5

=================== FDISK:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 

bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0005b42f

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   

211118079   105558016    7  HPFS/NTFS/exFAT
/dev/sda2       968423424  1953523711   492550144    5  Extended
/dev/sda3       211118080   968423423   378652672    7  HPFS/NTFS/exFAT
/dev/sda5       

968425472  1941702655   486638592   83  Linux
/dev/sda6      1941704704  1953523711     5909504   82  Linux swap / Solaris

Partition table entries are not in disk order

Disk /dev/sdb: 8021 MB, 8021606400 bytes
247 heads, 62 sectors/track, 1023 cylinders, total 15667200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk 

identifier: 0x0000a07d

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          62    15666221     7833080    b  W95 FAT32



=================== Before mainwindow
FSCK no PASTEBIN yes 

WUBI no WINBOOT no
recommendedrepair, purge, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge
UNHIDEBOOT_ACTION yes (10s), noflag (sda1)
PART_TO_REINSTALL_GRUB sda5, FORCE_GRUB 

no (sda) REMOVABLEDISK no
USE_SEPARATEBOOTPART no (sda3) grub2 ()
UNCOMMENT_GFXMODE no ATA  ADD_KERNEL_OPTION no (acpi=off)
MBR_TO_RESTORE  ( )

=================== Actions
FSCK no PASTEBIN yes WUBI no WINBOOT no
bootinfo, nombraction, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge
UNHIDEBOOT_ACTION no (10s), noflag 

(sda1)
PART_TO_REINSTALL_GRUB sda5, FORCE_GRUB no (sda) REMOVABLEDISK no
USE_SEPARATEBOOTPART no (sda3) grub2 ()
UNCOMMENT_GFXMODE no ATA  ADD_KERNEL_OPTION no 

(acpi=off)
MBR_TO_RESTORE  ( )
No change has been performed on your computer. See you soon!
internet: no-internet
inte

J'ose une autre question:
est-ce que formater le disque entièrement et installer une Linux restaure la MBR?

En espérant une aide substantielle, je vous remercie d'avance,
L'Ursu_

Suite....:

jeanjd63 a écrit :

Par contre as-tu bien décoché la case GRUB isn't installed to the bootsector ?

Tu parles d'une case présente dans l'installation de Voyager ou dans EasyBCD?
Je te retourne la commande après reboot...
A+,
L'Ursu_

#20 Re : -1 »  Grub après installation Windows » Le 26/10/2013, à 10:19

ursu
Réponses : 9

Re-

Retour de la commande:

┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  dd  if=/dev/sda5 bs=512 count=1  |  hexdump  -C
00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.0188864 s, 27.1 kB/s
00000200
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> 

Merci et à+,
L'Ursu_

#21 Re : -1 »  Grub après installation Windows » Le 26/10/2013, à 13:56

ursu
Réponses : 9

Re-

Premier post édité....

Retour de la commande:

┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  mount  /dev/sda5  /mnt
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  mount  --bind  /dev  /mnt/dev
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  mount  --bind  /proc  /mnt/proc
┌─( xubuntu ) - ( 3.2.0-23-generic ) - ( ~ )
└─> sudo  chroot  /mnt
root@xubuntu:/# grub-install --force  /dev/sda5
Installation finished. No error reported.
root@xubuntu:/# dd  if=/dev/sda5 bs=512 count=1  |  hexdump  -C
1+0 records in
1+0 records out
00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
512 bytes (512 B) copied*
00000200
, 3.9085e-05 s, 13.1 MB/s
root@xubuntu:/# 

Pas de changement, non?
Merci et à +,
L'Ursu_

#22 Re : -1 »  Grub après installation Windows » Le 26/10/2013, à 17:10

ursu
Réponses : 9

Re-

Plus tôt, tu parlais d'une case à (dé)cocher concernant grub; il s'agissait d'une manip' dans EasyBCD ou lors de
l'installation de Voyager?
Sinon, une question déjà posée bien avant, le formatage complet avec l'installation de Linux restaurait-il totalement
la MBR?
Merci, à +,
L'Ursu_

#23 Re : -1 »  Grub après installation Windows » Le 26/10/2013, à 17:34

ursu
Réponses : 9

Re-

Et une réinstallation complète, y a un risque?

#24 Re : -1 »  Grub après installation Windows » Le 27/10/2013, à 15:50

ursu
Réponses : 9

Bonjour à tous!

Salute jeanjd63,

Mais avec une 12.04 classique et non une version Voyager qui semble "merder" sur l'install grub.

Ouais...., le hic, c'est que j'ai peur que l'installation  d'une iso foire sur ma clef usb (là, où j'amorce la Voyager....).
Pour la Voyager, je suis assez étonné car je l'ai installée sur mon PC, ainsi que sur mon ancien portable et tout tournait parfaitement... .
Je pense que je formaterai tout ça à mon retour en métropole... .
Merci encore pour ton aide et ta patience...
L'Ursu_