Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
nombre réponses : 6

#0 Re : -1 »  [Résolu] Hoary preview: problème résolution bloquée 1024x600 » Le 26/10/2007, à 09:32

MisterY
Réponses : 20

Pour trouver les valeurs HorizSync et VertRefresh pas de soucis :
En mode console éditer le fichier log suivant

# sudo vi /var/log/Xorg.0.log

et vous trouverez ceci à l'intérieur.
Noter les valeur en gras pour les reporter dans le fichier xorg.conf:

(II) RADEON(0): EDID data from the display on connector: VGA ----------------------
(II) RADEON(0): Manufacturer: PHL  Model: 818  Serial#: 16091
(II) RADEON(0): Year: 2003  Week: 36
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Signal levels configurable
(II) RADEON(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.641 redY: 0.342   greenX: 0.292 greenY: 0.611
(II) RADEON(0): blueX: 0.147 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 70  vid: 19057
(II) RADEON(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No:  HD  016091
(II) RADEON(0): Monitor name: Philips 170S4
(II) RADEON(0): Ranges: V min: 56  V max: 76 Hz, H min: 30  H max: 82 kHz, PixClock max 140 MHz
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff00410c1808db3e0000
(II) RADEON(0):     240d01031f221b78ea2ee5a4574a9c25
(II) RADEON(0):     115054bfef80714a714f814081800101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300520e1100001e000000ff00204844
(II) RADEON(0):     20203031363039310a20000000fc0050
(II) RADEON(0):     68696c697073203137305334000000fd
(II) RADEON(0):     00384c1e520e000a202020202020003a
finished output detect: 0
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on connector: DVI-I ----------------------
(II) RADEON(0): Manufacturer: FUS  Model: 608  Serial#: 16843009
(II) RADEON(0): Year: 2006  Week: 43
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.639 redY: 0.348   greenX: 0.282 greenY: 0.612
(II) RADEON(0): blueX: 0.141 blueY: 0.082   whiteX: 0.306 whiteY: 0.332
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YENB311810
(II) RADEON(0): Ranges: V min: 56  V max: 75 Hz, H min: 31  H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: A17-2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff001ab3080601010101
(II) RADEON(0):     2b10010368221b782a8704a359489c24
(II) RADEON(0):     154e55a54b0081800101010101010101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300520e1100001e000000ff0059454e
(II) RADEON(0):     423331313831300a2020000000fd0038
(II) RADEON(0):     4b1f510e000a202020202020000000fc
(II) RADEON(0):     004131372d320a202020202020200011

Sa ma résolut tous mes problèmes de résolution sans avoir à écrire une ligne de profile dans les sections Monitor.

#1 Re : -1 »  Pourquoi deux endroits pour régler sa résolution d'écran ? » Le 29/10/2007, à 17:40

MisterY
Réponses : 7

C'est d'ailleurs dans le fichier /etc/X11/xorg.conf que le panneau de configuration 'Système/Administration/Ecrans et affichages' vient puiser ses informations.
Le panneau de configuration 'Système/Préférences/Résolutions de l'écran' provient de la version Feisty.

#2 Re : -1 »  Problème résolution au démarrage » Le 26/10/2007, à 09:49

MisterY
Réponses : 3

Pour trouver les valeurs HorizSync et VertRefresh pas de soucis :
En mode console éditer le fichier log suivant

# sudo vi /var/log/Xorg.0.log

et vous trouverez ceci à l'intérieur.
Noter les valeur en gras pour les reporter dans le fichier xorg.conf:

(II) RADEON(0): EDID data from the display on connector: VGA ----------------------
(II) RADEON(0): Manufacturer: PHL  Model: 818  Serial#: 16091
(II) RADEON(0): Year: 2003  Week: 36
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Signal levels configurable
(II) RADEON(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.641 redY: 0.342   greenX: 0.292 greenY: 0.611
(II) RADEON(0): blueX: 0.147 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 70  vid: 19057
(II) RADEON(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No:  HD  016091
(II) RADEON(0): Monitor name: Philips 170S4
(II) RADEON(0): Ranges: V min: 56  V max: 76 Hz, H min: 30  H max: 82 kHz, PixClock max 140 MHz
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff00410c1808db3e0000
(II) RADEON(0):     240d01031f221b78ea2ee5a4574a9c25
(II) RADEON(0):     115054bfef80714a714f814081800101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300520e1100001e000000ff00204844
(II) RADEON(0):     20203031363039310a20000000fc0050
(II) RADEON(0):     68696c697073203137305334000000fd
(II) RADEON(0):     00384c1e520e000a202020202020003a
finished output detect: 0
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on connector: DVI-I ----------------------
(II) RADEON(0): Manufacturer: FUS  Model: 608  Serial#: 16843009
(II) RADEON(0): Year: 2006  Week: 43
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.639 redY: 0.348   greenX: 0.282 greenY: 0.612
(II) RADEON(0): blueX: 0.141 blueY: 0.082   whiteX: 0.306 whiteY: 0.332
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YENB311810
(II) RADEON(0): Ranges: V min: 56  V max: 75 Hz, H min: 31  H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: A17-2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff001ab3080601010101
(II) RADEON(0):     2b10010368221b782a8704a359489c24
(II) RADEON(0):     154e55a54b0081800101010101010101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300520e1100001e000000ff0059454e
(II) RADEON(0):     423331313831300a2020000000fd0038
(II) RADEON(0):     4b1f510e000a202020202020000000fc
(II) RADEON(0):     004131372d320a202020202020200011

Sa ma résolut tous mes problèmes de résolution sans avoir à écrire une ligne de profile dans les sections Monitor.

#3 Re : -1 »  Resolution écran » Le 26/10/2007, à 09:47

MisterY
Réponses : 7

Pour trouver les valeurs HorizSync et VertRefresh pas de soucis :
En mode console éditer le fichier log suivant

# sudo vi /var/log/Xorg.0.log

et vous trouverez ceci à l'intérieur.
Noter les valeur en gras pour les reporter dans le fichier xorg.conf:

(II) RADEON(0): EDID data from the display on connector: VGA ----------------------
(II) RADEON(0): Manufacturer: PHL  Model: 818  Serial#: 16091
(II) RADEON(0): Year: 2003  Week: 36
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Signal levels configurable
(II) RADEON(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.641 redY: 0.342   greenX: 0.292 greenY: 0.611
(II) RADEON(0): blueX: 0.147 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 70  vid: 19057
(II) RADEON(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No:  HD  016091
(II) RADEON(0): Monitor name: Philips 170S4
(II) RADEON(0): Ranges: V min: 56  V max: 76 Hz, H min: 30  H max: 82 kHz, PixClock max 140 MHz
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff00410c1808db3e0000
(II) RADEON(0):     240d01031f221b78ea2ee5a4574a9c25
(II) RADEON(0):     115054bfef80714a714f814081800101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300520e1100001e000000ff00204844
(II) RADEON(0):     20203031363039310a20000000fc0050
(II) RADEON(0):     68696c697073203137305334000000fd
(II) RADEON(0):     00384c1e520e000a202020202020003a
finished output detect: 0
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on connector: DVI-I ----------------------
(II) RADEON(0): Manufacturer: FUS  Model: 608  Serial#: 16843009
(II) RADEON(0): Year: 2006  Week: 43
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.639 redY: 0.348   greenX: 0.282 greenY: 0.612
(II) RADEON(0): blueX: 0.141 blueY: 0.082   whiteX: 0.306 whiteY: 0.332
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YENB311810
(II) RADEON(0): Ranges: V min: 56  V max: 75 Hz, H min: 31  H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: A17-2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff001ab3080601010101
(II) RADEON(0):     2b10010368221b782a8704a359489c24
(II) RADEON(0):     154e55a54b0081800101010101010101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300520e1100001e000000ff0059454e
(II) RADEON(0):     423331313831300a2020000000fd0038
(II) RADEON(0):     4b1f510e000a202020202020000000fc
(II) RADEON(0):     004131372d320a202020202020200011

Ca ma résolut tous mes problèmes de résolution sans avoir à écrire une ligne de profile dans les sections Monitor.

#4 Re : -1 »  Problème au démarrage d'ubuntu » Le 10/10/2007, à 14:12

MisterY
Réponses : 3

Tu peux toujours utiliser le Live CD de kubutu pour lancer ton PC.
A partir de cet instant, tu pourraremonter ta partition et accéder à tes données qui doit ce trouver dans le dossier media.

C'est aussi une méthode pratique pour relire les log d'erreur et corriger les fichier de configuration.

#5 Re : -1 »  Problème au démarrage d'ubuntu » Le 22/10/2007, à 12:17

MisterY
Réponses : 3

Là je passe le relais a une autre personne...:rolleyes:

Au pire, débranche ta tablette Wacom de ton PC... big_smile