beryl plante "gentiment"

izbarkan · Le 14/03/2007, à 23:03

bonjour, j'ai bien aimé cette jolie formule lue sur un topic précédent de plus elle est de circonstance...

j'ai ubuntu edgy, un chipset intégré intel 82852/855GM, suis novice sur linux et a fortiori ubuntu et j'ai voulu installer beryl.

aucun plantage, j'ai bien fait l'installation en suivant tous les tuto de doc.ubuntu mais ça me remet systématiquement et automatiquement metacity dès que j'essaie de lancer beryl.

Si j'enlève le dépannage automatique en metacity je me retrouve avec des fenetres impossible à deplacer fermer ou reduire. J'ai pas le cube et le seul élément sur lequel je peux agir et mon tableau de bord supérieur (le principal) et l'intérieur des fenêtre.

Voilà j'ai fouillé et je vois pas le souci, j'ai bien Defaultdepth à 24 dans mon xorg.conf.(on m'a dit que ça ne marchait pas si ce n'était pas la bonne config)

J'ai voulu installer des drivers nVidia avec envy mais au final, même s'il me semble qu'aiglx supporte ma carte je ne suis pas sûr du tout de la caractéristique nVidia de ma carte...
Donc je ne sais quel driver réinstaller si c'est ça...

si je lance beryl en console : voilà ce que ça donne...
je me doute bien qu'il y a un truc qui couille mais je suis un peu trop newbie pour m'en sortir seul là... please help.

**************************************************************
* Beryl system compatiblity check *
**************************************************************

Detected xserver : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed

Checking Screen 0 ...

Xlib: extension "GLX" missing on display ":0.0".
Root visual is not a GL visual
Xlib: extension "GLX" missing on display ":0.0".
beryl: Root visual is not a GL visual
beryl: Failed to manage screen: 0
beryl: No manageable screens found on display :0.0

inbox · Le 15/03/2007, à 00:50

Salut,

Que donne la commande

lspci | grep VGA

dans un terminal ?

izbarkan · Le 15/03/2007, à 01:42

ça donne ça

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)

Stickmaniak · Le 15/03/2007, à 02:34

Bonsoir tout le monde, bonsoir izbarkan, bonsoir inbox; moi j'ais installer Kubuntu edgy il y a deux semaine, et je suis newbie, tout comme toi.
J'ais installer Beryl, sans aucuns problème, ma carte graphique est directement compatible avec aiglx (c'est une intel, tout comme toi). Mais quand je lance le test Beryl dans la consol, ca va encore moin loin que toi...:

*********************************************************
* Beryl system compatiblity check *
*********************************************************

Detected xserver : AIGLX

Checking Display :0 ...

Checking for XComposite extension : failed

No compiste extension
beryl: No composite extension

______
Quand à la commande lspci | grep VGA:
0000:00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)

Pouvez vous m'aider s'il vous plais? Merci d'avance. Bonne soirée

Varimathras · Le 15/03/2007, à 09:45

izbarkan > Tu confonds beaucoup de chose, je te ré-explique tranquillement :

- Ta carte est équipé d'un chipset de marque Intel et de nom 855GM. C'est donc une carte graphique Intel 855GM
- nvidia est un autre fabricant de chipset graphique, ca n'as strictement rien à voir avec ta carte de marque Intel. Oublie nvidia... tu t'en tamponnes royalement de nvidia.
- Aiglx est un "protocole" qui permet au système d'utiliser l'accélération 3D des cartes graphique moderne afin de permettre des effets 3D sur les bureaux KDE, Gnome etc etc... Aiglx d'une manière ou d'une autre est nécessaire pour faire tourner Beryl.
- Xorg est le serveur graphique d'Ubuntu, c'est lui qui gère tout ce qui toute à l'affichage graphique sous Ubuntu.

Maitenant pour toi, 2 cas :

- Soit tu est sous Ubuntu 6.06 Dapper qui intégre xorg 7.0 : xorg 7.0 n'intégre pas Aiglx, donc ne supporte pas d'origine Beryl par defaut. Ils faut donc simplement installer Aiglx puis Beryl par la suite. Si tu es dans ce cas je te conseil ce tuto : http://doc.ubuntu-fr.org/aiglx (un peu complexe mais bon, en suivant bien tu devrais t'en sortir)

- Soit tu es sous Ubuntu 6.10 Edgy qui intégre xorg 7.1 : xorg 7.1 intègre directement Aiglx... dans ce cas tu n'as rien à faire d'autre que d'installer Beryl et Emerald et lancer Beryl puisque tout est supporté par défaut.

Voila, si tu ne doit retenir qu'une chose de ce post : OUBLIE NVIDIA

inbox · Le 15/03/2007, à 14:58

@izbarkan et Stickmaniak

Si vous avez un problème de pilote, voir ce lien dans la documentation du forum. A noter qu'il y a deux solutions possible, mais que la 2ème semble plus facile à mettre en oeuvre.

@ Varimathras

Voila, si tu ne doit retenir qu'une chose de ce post : OUBLIE NVIDIA

Bien entendu.

Dernière modification par inbox (Le 15/03/2007, à 14:58)

Stickmaniak · Le 15/03/2007, à 20:31

Bonjour tout le monde, inbox merci pour ce lien, j'ais mis à jour la version de mon pilote Intel, mais toujour aucun changement quand je lance le test de beryl dans la console...
Comment faire?

inbox · Le 15/03/2007, à 22:43

@ Stickmaniak

Si tu as exactement les mêmes messages d'erreur qu'avant, ne les repostes pas.

Par contre il me faudrait le contenu de ton xorg.conf (fichier de configuration du serveur X). Tu l'obtiendras par la commande

sudo gedit /etc/X11/xorg.conf

Stickmaniake · Le 15/03/2007, à 23:57

Bonsoir inbox, voila le contenu de mon xorg.conf:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Intel Corporation 82852/855GM Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82852/855GM Integrated Graphics Device"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

______________________
Desole pour la longeur du poste!
Merci d'avance!

Varimathras · Le 16/03/2007, à 00:16

Section "Device"
Identifier "Intel Corporation 82852/855GM Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Remplace "i810" par "intel" soit :

Section "Device"
Identifier "Intel Corporation 82852/855GM Integrated Graphics Device"
Driver "intel"
BusID "PCI:0:2:0"
EndSection

Biensure aprés avoir prit soin de faire :

 sudo apt-get install xserver-xorg-video-intel

Dernière modification par Varimathras (Le 16/03/2007, à 00:17)

inbox · Le 16/03/2007, à 03:09

@Varimathras et Stickmaniake

A tester, et à retourner l'info si c'est OK/NOK pour toi ?!

Dernière modification par inbox (Le 16/03/2007, à 03:11)

Stickmaniak · Le 16/03/2007, à 12:29

Bonjour tout le monde, merci Varimathras, beryl est installé et le test beryl marche presque parfaitement:
libGL warning: 3D driver claims to not support visual 0x4b #un problème la non?
Checking for GLX_SGIX_fbconfig :passed
Checking for GLX_EXT_texture_from_pixmap :passed
Checking for non power of two texture support :passed
Checking maximum texture siza :passed (2048x2048) #un problème la non?

beryl: symbol lookup error: beryl: undefined symbol: XCompositeGetOverlayWindow #un problème la non?

Problème de résolution? Car je ne vois plus aucune barre de tache, ni menu K, ni rien d'autre à par le coeur des fenêtre que j'ouvre grâce a Alt+F2. (Une autre chose qui n'a peut etre rien a voir: quand j'arrive a l'écrant login après un reboot, mon clavier est paramétré comme clavier amériquain alor que quand je rentre sur ma session les clavier est configuré français. ?)

Dernière modification par Stickmaniak (Le 16/03/2007, à 18:50)

newbeenul · Le 16/03/2007, à 12:45

Bonjour,
Chez moi aussi (sur un dell precision 530) ca "plante gentiment" (beryl ne se lance pas).
Mais mon message est un peu différent... et je ne trouve pas de correspondance dans le wiki http://doc.ubuntu-fr.org/beryl_problemes ...
beryl donne

:~$ beryl
**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

libGL warning: 3D driver claims to not support visual 0x4b
Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Checking for non power of two texture support   : passed
Checking maximum texture size                   : failed

Root window size (1280/1024) is bigger then maximum texture size (1024x1024)

X Error of failed request:  GLXBadContext
  Major opcode of failed request:  143 (GLX)
  Minor opcode of failed request:  4 (X_GLXDestroyContext)
  Serial number of failed request:  38
  Current serial number in output stream:  40

Que puis-je faire d'après vous?
Merci pour l'aide!

edit : j'ai trouvé ca http://forum.beryl-project.org/viewtopic.php?p=21216 qui ressemblait un peu , j'ai essayé de suivre (installé driconf et changé variable), sans succès...

Dernière modification par newbeenul (Le 16/03/2007, à 13:05)

Stickmaniak · Le 16/03/2007, à 18:24

Bonsoir newbeenul, je suis nouveau sous linux, comme tu as pu le lire, mais je remarque dans le beryl test :
Root window size (1280/1024) is bigger then maximum texture size (1024x1024)

Essaye de changer la résolution de ton écrant dans le xorg.conf dans la section Screen (1024x7** au lieu de 1280x1024), en faisant une sauvegarde de secour de celui-ci avant, car encore une fois je ne suis pas très expérimenté. (commande pour ouvrir le xorg.conf: sudo gedit /etc/X11/xorg.conf)

Dernière modification par Stickmaniak (Le 16/03/2007, à 18:26)

inbox · Le 16/03/2007, à 23:18

Juste pour info, lorsque tu as un fichier avec beaucoup de lignes à coller, il faut le mettre entre Quote. Pour cela utilises l'un des bouton qui se trouve au dessus des smileys.

Penses d'ailleurs à éditer ton message contenant ton xorg.conf.

Merci

Pour tes messages d'erreur, on va voir ça dans l'ordre.

libGL warning: 3D driver claims to not support visual 0x4b #un problème la non?

Non, a priori ce n'est pas génant et ce ne sera à approfondir qu'en dernier lieu.

Checking maximum texture siza :passed (2048x2048) #un problème la non?

Non puisqu'il est indiqué passed -> réussi.

beryl: symbol lookup error: beryl: undefined symbol: XCompositeGetOverlayWindow #un problème la non?

Oui, il doit manquer ce qui suit dans ton fichier xorg.conf. Donc y ajouter

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

Sinon, dans ton xorg.conf, j'ai remarqué cette ligne

Option "XkbLayout" "us"

qui signifie que ton clavier est configuré comme étant américain ! Cela ne gène pas l'utilisation ?

Par précaution je remplacerai le "us" par "fr".

A+

Stickmaniak · Le 17/03/2007, à 02:08

Bonsoir inbox! J'ais pris note pour les balises quote.
J'ai modifier le "us" en "fr" (ca marche normalement au boot) et à la fin de mon fichier j'ais ajouté:

Section "Extensions"
Option "Composite" "Enable"
EndSection

Je reboot, (ayant supprimé préalablement tout les fichiers systhèm crée précedement pour lancer beryl automatiquement), je démarre ma session, puis je retape "beryl" dans une console. Il n'y à aucun changement, toujour le même message d'erreur....

Bonne nuit!

inbox · Le 17/03/2007, à 23:05

Salut,

Colles donc ici le contenu de

cat /var/log/Xorg.0.log

entre Quote bien entendu
A+

Dernière modification par inbox (Le 17/03/2007, à 23:06)

Stickmaniake · Le 18/03/2007, à 00:40

Bonsoir! Voili, voilou:

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux camille-laptop 2.6.15-26-386 #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006 i686
Build Date: 07 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 17 19:27:13 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Écran générique"
(**) | |-->Device "Intel Corporation 82852/855GM Integrated Graphics Device"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(**) |-->Input Device "Synaptics Touchpad"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/X11/fonts/misc,
/usr/share/X11/fonts/100dpi/:unscaled,
/usr/share/X11/fonts/75dpi/:unscaled,
/usr/share/X11/fonts/Type1,
/usr/share/X11/fonts/100dpi,
/usr/share/X11/fonts/75dpi,
/usr/share/fonts/X11/misc,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/,
/usr/share/fonts/X11/OTF,
/usr/share/fonts/X11/Type1/,
/usr/share/fonts/X11/CID/,
/usr/share/fonts/X11/100dpi/,
/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3580 card 1631,d004 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 8086,3584 card 1631,d004 rev 02 class 08,80,00 hdr 00
(II) PCI: 00:00:3: chip 8086,3585 card 1631,d004 rev 02 class 08,80,00 hdr 80
(II) PCI: 00:02:0: chip 8086,3582 card 1631,d004 rev 02 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,3582 card 1631,d004 rev 02 class 03,80,00 hdr 80
(II) PCI: 00:1d:0: chip 8086,24c2 card 1631,d004 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1631,d004 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1631,d004 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1631,d004 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1631,d004 rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1631,d004 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1631,d004 rev 03 class 07,03,00 hdr 00
(II) PCI: 01:01:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 01:02:0: chip 1106,3106 card 1631,d004 rev 8b class 02,00,00 hdr 00
(II) PCI: 01:03:0: chip 104c,ac50 card c400,0000 rev 02 class 06,07,00 hdr 02
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,5), BCTRL: 0x0802 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000dfff (0x2000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (1:3:0), (1,2,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[b]
[1] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xa0000000 - 0xa1ffffff (0x2000000) MX[b]
(--) PCI:*(0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xb0000000/27, 0xf0000000/19, I/O @ 0xe000/3
(--) PCI: (0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0x40000000/27, 0x48000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[b]
[1] -1 0 0xe0001000 - 0xe0001fff (0x1000) MX[b]
[2] -1 0 0xf0080600 - 0xf00806ff (0x100) MX[b]
[3] -1 0 0xf0080400 - 0xf00805ff (0x200) MX[b]
[4] -1 0 0x48080000 - 0x480803ff (0x400) MX[b]
[5] -1 0 0xfebff000 - 0xfebff3ff (0x400) MX[b]
[6] -1 0 0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
[7] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[8] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[9] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[b]
[10] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[b]
[11] -1 0 0x0000e200 - 0x0000e23f (0x40) IX[b]
[12] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[b]
[13] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[b]
[15] -1 0 0x00001600 - 0x0000161f (0x20) IX[b]
[16] -1 0 0x00001200 - 0x0000121f (0x20) IX[b]
[17] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0x48000000 - 0x4807ffff (0x80000) MX[b](B)
[1] -1 0 0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[b]
[1] -1 0 0xe0001000 - 0xe0001fff (0x1000) MX[b]
[2] -1 0 0xf0080600 - 0xf00806ff (0x100) MX[b]
[3] -1 0 0xf0080400 - 0xf00805ff (0x200) MX[b]
[4] -1 0 0x48080000 - 0x480803ff (0x400) MX[b]
[5] -1 0 0xfebff000 - 0xfebff3ff (0x400) MX[b]
[6] -1 0 0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
[7] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[8] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[9] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[b]
[10] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[b]
[11] -1 0 0x0000e200 - 0x0000e23f (0x40) IX[b]
[12] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[b]
[13] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[b]
[15] -1 0 0x00001600 - 0x0000161f (0x20) IX[b]
[16] -1 0 0x00001200 - 0x0000121f (0x20) IX[b]
[17] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x48000000 - 0x4807ffff (0x80000) MX[b](B)
[1] -1 0 0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[b]
[5] -1 0 0xe0001000 - 0xe0001fff (0x1000) MX[b]
[6] -1 0 0xf0080600 - 0xf00806ff (0x100) MX[b]
[7] -1 0 0xf0080400 - 0xf00805ff (0x200) MX[b]
[8] -1 0 0x48080000 - 0x480803ff (0x400) MX[b]
[9] -1 0 0xfebff000 - 0xfebff3ff (0x400) MX[b]
[10] -1 0 0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
[11] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[12] -1 0 0x48000000 - 0x4807ffff (0x80000) MX[b](B)
[13] -1 0 0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[17] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[b]
[18] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[b]
[19] -1 0 0x0000e200 - 0x0000e23f (0x40) IX[b]
[20] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[b]
[21] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[22] -1 0 0x00001100 - 0x0000110f (0x10) IX[b]
[23] -1 0 0x00001600 - 0x0000161f (0x20) IX[b]
[24] -1 0 0x00001200 - 0x0000121f (0x20) IX[b]
[25] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[b](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.6.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) Wacom driver level: 47-0.7.2 $
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) INTEL: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM
(II) Primary Device is: PCI 00:02:0
(--) Chipset 852GM/855GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[b]
[5] -1 0 0xe0001000 - 0xe0001fff (0x1000) MX[b]
[6] -1 0 0xf0080600 - 0xf00806ff (0x100) MX[b]
[7] -1 0 0xf0080400 - 0xf00805ff (0x200) MX[b]
[8] -1 0 0x48080000 - 0x480803ff (0x400) MX[b]
[9] -1 0 0xfebff000 - 0xfebff3ff (0x400) MX[b]
[10] -1 0 0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
[11] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[12] -1 0 0x48000000 - 0x4807ffff (0x80000) MX[b](B)
[13] -1 0 0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[17] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[b]
[18] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[b]
[19] -1 0 0x0000e200 - 0x0000e23f (0x40) IX[b]
[20] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[b]
[21] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[22] -1 0 0x00001100 - 0x0000110f (0x10) IX[b]
[23] -1 0 0x00001600 - 0x0000161f (0x20) IX[b]
[24] -1 0 0x00001200 - 0x0000121f (0x20) IX[b]
[25] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[b]
[5] -1 0 0xe0001000 - 0xe0001fff (0x1000) MX[b]
[6] -1 0 0xf0080600 - 0xf00806ff (0x100) MX[b]
[7] -1 0 0xf0080400 - 0xf00805ff (0x200) MX[b]
[8] -1 0 0x48080000 - 0x480803ff (0x400) MX[b]
[9] -1 0 0xfebff000 - 0xfebff3ff (0x400) MX[b]
[10] -1 0 0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
[11] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[12] -1 0 0x48000000 - 0x4807ffff (0x80000) MX[b](B)
[13] -1 0 0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
[14] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[20] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[b]
[21] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[b]
[22] -1 0 0x0000e200 - 0x0000e23f (0x40) IX[b]
[23] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[b]
[24] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[25] -1 0 0x00001100 - 0x0000110f (0x10) IX[b]
[26] -1 0 0x00001600 - 0x0000161f (0x20) IX[b]
[27] -1 0 0x00001200 - 0x0000121f (0x20) IX[b]
[28] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[b](B)
[29] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[30] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(**) INTEL(0): Depth 24, (--) framebuffer bpp 32
(==) INTEL(0): RGB weight 888
(==) INTEL(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) INTEL(0): initializing int10
(WW) INTEL(0): Bad V_BIOS checksum
(II) INTEL(0): Primary V_BIOS segment is: 0xc000
(II) INTEL(0): VESA BIOS detected
(II) INTEL(0): VESA VBE Version 3.0
(II) INTEL(0): VESA VBE Total Mem: 32576 kB
(II) INTEL(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) INTEL(0): VESA VBE OEM Software Rev: 1.0
(II) INTEL(0): VESA VBE OEM Vendor: Intel Corporation
(II) INTEL(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) INTEL(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) INTEL(0): Integrated Graphics Chipset: Intel(R) 855GME
(--) INTEL(0): Chipset: "852GM/855GM"
(--) INTEL(0): Linear framebuffer at 0xB0000000
(--) INTEL(0): IO registers at addr 0xF0000000
(II) INTEL(0): 2 display pipes available.
(II) INTEL(0): detected 32636 kB stolen memory.
(II) INTEL(0): Kernel reported 232704 total, 1 used
(II) INTEL(0): I830CheckAvailableMemory: 930812 kB available
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules/libi2c.so
(II) INTEL(0): I2C bus "CRTDDC_A" initialized.
(II) INTEL(0): I2C bus "LVDSDDC_C" initialized.
(II) INTEL(0): I2C bus "DVODDC_D" initialized.
(II) INTEL(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers/sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(EE) INTEL(0): detecting sil164
(EE) INTEL(0): Unable to read from DVOI2C_E Slave 112.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers/ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(EE) INTEL(0): detecting ch7xxx
(EE) INTEL(0): Unable to read from DVOI2C_E Slave 236.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(EE) INTEL(0): DDC Analog 0, 00005010
(II) INTEL(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "LVDSDDC_C:ddc2" removed.
(EE) INTEL(0): DDC LVDS 1, 00005018
(II) INTEL(0): I2C device "DVODDC_D:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "DVODDC_D:ddc2" removed.
(EE) INTEL(0): DDC DVO 2, 0000501C
(II) INTEL(0): Found BDB block type 254
(II) INTEL(0): Found BDB block type 1
(II) INTEL(0): Found BDB block type 254
(II) INTEL(0): Found BDB block type 2
(II) INTEL(0): Found BDB block type 3
(II) INTEL(0): Found BDB block type 4
(II) INTEL(0): Found BDB block type 254
(II) INTEL(0): Found BDB block type 5
(II) INTEL(0): Found BDB block type 6
(II) INTEL(0): Found BDB block type 7
(II) INTEL(0): Found BDB block type 8
(II) INTEL(0): Found BDB block type 10
(II) INTEL(0): Found BDB block type 11
(II) INTEL(0): Found BDB block type 12
(II) INTEL(0): Found BDB block type 13
(II) INTEL(0): Found BDB block type 14
(II) INTEL(0): Found BDB block type 15
(II) INTEL(0): Found BDB block type 16
(II) INTEL(0): Found BDB block type 17
(II) INTEL(0): Found BDB block type 18
(II) INTEL(0): Found BDB block type 19
(II) INTEL(0): Found BDB block type 20
(II) INTEL(0): Found BDB block type 40
(II) INTEL(0): Found BDB block type 41
(II) INTEL(0): Found panel of size 1024x768 in BIOS VBT tables
(II) INTEL(0): Found BDB block type 42
(II) INTEL(0): Found BDB block type 43
(II) INTEL(0): Found BDB block type 44
(II) INTEL(0): Monitoring connected displays enabled
(--) INTEL(0): Pre-allocated VideoRAM: 32636 kByte
(==) INTEL(0): VideoRAM: 65536 kByte
(==) INTEL(0): video overlay key set to 0x101fe
(**) INTEL(0): page flipping disabled
(==) INTEL(0): Using gamma correction (1.0, 1.0, 1.0)
Executing (ax == 0x5f01) BIOS call at ../../src/i830_driver.c:617
(II) INTEL(0): BIOS Build: 3104
(II) INTEL(0): Using new Pipe switch code
(==) INTEL(0): Device Presence: disabled.
(II) INTEL(0): No active displays on Pipe A.
(II) INTEL(0): Currently active displays on Pipe B:
(II) INTEL(0): LFP (local flat panel)
(==) INTEL(0): Display is using Pipe B
(--) INTEL(0): Maximum frambuffer space: 65368 kByte
(--) INTEL(0): Maximum space available for video modes: 32576 kByte
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): move blank start from 1024 to 1024
(--) INTEL(0): Virtual size is 1024x768 (pitch 1024)
(**) INTEL(0): *Mode "1024x768x60"
(==) INTEL(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) INTEL(0): VBE Restore workaround: enabled.
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 1 0 0xf0000000 - 0xf007ffff (0x80000) MS[b]
[1] 1 0 0xb0000000 - 0xb7ffffff (0x8000000) MS[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[b]
[7] -1 0 0xe0001000 - 0xe0001fff (0x1000) MX[b]
[8] -1 0 0xf0080600 - 0xf00806ff (0x100) MX[b]
[9] -1 0 0xf0080400 - 0xf00805ff (0x200) MX[b]
[10] -1 0 0x48080000 - 0x480803ff (0x400) MX[b]
[11] -1 0 0xfebff000 - 0xfebff3ff (0x400) MX[b]
[12] -1 0 0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x48000000 - 0x4807ffff (0x80000) MX[b](B)
[15] -1 0 0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
[16] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[17] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[18] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[19] 1 0 0x0000e000 - 0x0000e007 (0x8) IS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[23] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[b]
[24] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[b]
[25] -1 0 0x0000e200 - 0x0000e23f (0x40) IX[b]
[26] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[b]
[27] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[28] -1 0 0x00001100 - 0x0000110f (0x10) IX[b]
[29] -1 0 0x00001600 - 0x0000161f (0x20) IX[b]
[30] -1 0 0x00001200 - 0x0000121f (0x20) IX[b]
[31] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[b](B)
[32] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[33] 1 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) INTEL(0): Rotating to 0 degrees
Executing (ax == 0x5f1c) BIOS call at ../../src/i830_driver.c:585
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) INTEL(0): initializing int10
(WW) INTEL(0): Bad V_BIOS checksum
(II) INTEL(0): Primary V_BIOS segment is: 0xc000
(II) INTEL(0): VESA BIOS detected
(II) INTEL(0): VESA VBE Version 3.0
(II) INTEL(0): VESA VBE Total Mem: 32576 kB
(II) INTEL(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) INTEL(0): VESA VBE OEM Software Rev: 1.0
(II) INTEL(0): VESA VBE OEM Vendor: Intel Corporation
(II) INTEL(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) INTEL(0): VESA VBE OEM Product Rev: Hardware Version 0.0
Executing (ax == 0x5f1c) BIOS call at ../../src/i830_driver.c:585
(II) INTEL(0): Allocated 128 kB for the ring buffer at 0x0
(II) INTEL(0): Allocating at least 512 scanlines for pixmap cache
(II) INTEL(0): Initial framebuffer allocation size: 6144 kByte
(II) INTEL(0): Allocated 4 kB for HW cursor at 0x7fff000 (0x37fd0000)
(II) INTEL(0): Allocated 16 kB for HW (ARGB) cursor at 0x7ffb000 (0x37840000)
(II) INTEL(0): Allocated 4 kB for Overlay registers at 0x7ffa000 (0x37846000).
(II) INTEL(0): Allocated 64 kB for the scratch buffer at 0x7fea000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) INTEL(0): [drm] loaded kernel module for "i915" driver
(II) INTEL(0): [drm] DRM interface version 1.2
(II) INTEL(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) INTEL(0): [drm] added 8192 byte SAREA at 0xf8d14000
(II) INTEL(0): [drm] mapped SAREA 0xf8d14000 to 0xb7a6b000
(II) INTEL(0): [drm] framebuffer handle = 0xb0020000
(II) INTEL(0): [drm] added 1 reserved context for kernel
(II) INTEL(0): Allocated 32 kB for the logical context at 0x7fe2000.
(II) INTEL(0): Allocated 3072 kB for the back buffer at 0x7800000.
(II) INTEL(0): Allocated 3072 kB for the depth buffer at 0x7400000.
(II) INTEL(0): Allocated 52992 kB for textures at 0x620000
(II) INTEL(0): 0x81fe2fc: Memory at offset 0x00020000, size 6144 kBytes
(II) INTEL(0): 0x81ff9c0: Memory at offset 0x07fff000, size 4 kBytes
(II) INTEL(0): 0x82003f0: Memory at offset 0x07ffb000, size 16 kBytes
(II) INTEL(0): 0x8200054: Memory at offset 0x00000000, size 128 kBytes
(II) INTEL(0): 0x81fe33c: Memory at offset 0x07fea000, size 64 kBytes
(II) INTEL(0): 0x8200450: Memory at offset 0x07ffa000, size 4 kBytes
(II) INTEL(0): 0x81fe47c: Memory at offset 0x07fe2000, size 32 kBytes
(II) INTEL(0): 0x81fe418: Memory at offset 0x07800000, size 3072 kBytes
(II) INTEL(0): 0x81fe438: Memory at offset 0x07400000, size 3072 kBytes
(II) INTEL(0): 0x81fe458: Memory at offset 0x00620000, size 52992 kBytes
(II) INTEL(0): Activating tiled memory for the back buffer.
(II) INTEL(0): Activating tiled memory for the depth buffer.
(II) INTEL(0): [drm] Registers = 0xf0000000
(II) INTEL(0): [drm] ring buffer = 0xb0000000
(II) INTEL(0): [drm] init sarea width,height = 1024 x 768 (pitch 1024)
(II) INTEL(0): [drm] Mapping front buffer
(II) INTEL(0): [drm] Front Buffer = 0xb0020000
(II) INTEL(0): [drm] Back Buffer = 0xb7800000
(II) INTEL(0): [drm] Depth Buffer = 0xb7400000
(II) INTEL(0): [drm] textures = 0xb0620000
(II) INTEL(0): [drm] Initialized kernel agp heap manager, 54263808
(II) INTEL(0): [drm] dma control initialized, using IRQ 10
(II) INTEL(0): [dri] visual configs initialized
(==) INTEL(0): Write-combining range (0xb0000000,0x8000000)
(II) INTEL(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) INTEL(0): PIPEACONF is 0x80000000
(II) INTEL(0): PIPEBCONF is 0x80000000
(II) INTEL(0): xf86BindGARTMemory: bind key 7 at 0x01fdf000 (pgoffset 8159)
(II) INTEL(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) INTEL(0): xf86BindGARTMemory: bind key 1 at 0x07ffb000 (pgoffset 32763)
(II) INTEL(0): xf86BindGARTMemory: bind key 3 at 0x07fea000 (pgoffset 32746)
(II) INTEL(0): xf86BindGARTMemory: bind key 2 at 0x07ffa000 (pgoffset 32762)
(II) INTEL(0): xf86BindGARTMemory: bind key 4 at 0x07fe2000 (pgoffset 32738)
(II) INTEL(0): xf86BindGARTMemory: bind key 5 at 0x07800000 (pgoffset 30720)
(II) INTEL(0): xf86BindGARTMemory: bind key 6 at 0x07400000 (pgoffset 29696)
(EE) INTEL(0): Choosing pipe 1's mode 1024x768@60.0 instead of xf86 mode 1024x768@60.0
(II) INTEL(0): Requested pix clock: 63345
hact: 1024 htot: 1344 hbstart: 1024 hbend: 1344 hsyncstart: 1048 hsyncend: 1184
vact: 768 vtot: 806 vbstart: 768 vbend: 806 vsyncstart: 771 vsyncend: 777
pipesrc: 1024x768, dspsize: 1024x768
chosen: dotclock 65000 ((23, 15), 6, (4, 4))
clock regs: 0x90820000, 0x0004150d
(II) INTEL(0): Mode bandwidth is 47 Mpixel/s
(II) INTEL(0): Disabling unused functions
(II) INTEL(0): Disabling pipe A
(II) INTEL(0): Disabling DPLL A
(II) INTEL(0): Display plane A is now disabled and connected to Pipe A.
(II) INTEL(0): Display plane B is now enabled and connected to Pipe B.
(WW) INTEL(0): ADPA: 0x40009c18
(WW) INTEL(0): LVDS: 0xc0000300
(WW) INTEL(0): DVOA: 0x00000000
(WW) INTEL(0): DVOB: 0x00000000
(WW) INTEL(0): DVOC: 0x00000000
(WW) INTEL(0): DVOA_SRCDI: 0x00000000
(WW) INTEL(0): DVOB_SRCDI: 0x00000000
(WW) INTEL(0): DVOC_SRCDI: 0x00000000
(WW) INTEL(0): PP_CONTROL: 0x00000001
(WW) INTEL(0): PP_STATUS: 0x4800000b
(WW) INTEL(0): PFIT_CONTR: 0x80000668
(WW) INTEL(0): PFIT_PGM_R: 0x00000000
(WW) INTEL(0): PORT_HOTPL: 0x00000000
(WW) INTEL(0): PORT_HOTPL: 0x00000000
(WW) INTEL(0): DSPACNTR: 0x00000000
(WW) INTEL(0): DSPASTRIDE: 0x00000000
(WW) INTEL(0): DSPAPOS: 0x00000000
(WW) INTEL(0): DSPASIZE: 0x00000000
(WW) INTEL(0): DSPABASE: 0x00000000
(WW) INTEL(0): PIPEACONF: 0x00000000
(WW) INTEL(0): PIPEASRC: 0x027f01df
(WW) INTEL(0): FPA0: 0x00021207
(WW) INTEL(0): FPA1: 0x00021207
(WW) INTEL(0): DPLL_A: 0x008b0000
(WW) INTEL(0): HTOTAL_A: 0x031f027f
(WW) INTEL(0): HBLANK_A: 0x03170287
(WW) INTEL(0): HSYNC_A: 0x02ef028f
(WW) INTEL(0): VTOTAL_A: 0x020c01df
(WW) INTEL(0): VBLANK_A: 0x020401e7
(WW) INTEL(0): VSYNC_A: 0x01eb01e9
(WW) INTEL(0): DSPBCNTR: 0x99000000
(WW) INTEL(0): DSPBSTRIDE: 0x00001000
(WW) INTEL(0): DSPBPOS: 0x00000000
(WW) INTEL(0): DSPBSIZE: 0x02ff03ff
(WW) INTEL(0): DSPBBASE: 0x00020000
(WW) INTEL(0): PIPEBCONF: 0x80000000
(WW) INTEL(0): PIPEBSRC: 0x03ff02ff
(WW) INTEL(0): FPB0: 0x0004150d
(WW) INTEL(0): FPB1: 0x00021207
(WW) INTEL(0): DPLL_B: 0x90820000
(WW) INTEL(0): HTOTAL_B: 0x053f03ff
(WW) INTEL(0): HBLANK_B: 0x053f03ff
(WW) INTEL(0): HSYNC_B: 0x049f0417
(WW) INTEL(0): VTOTAL_B: 0x032502ff
(WW) INTEL(0): VBLANK_B: 0x032502ff
(WW) INTEL(0): VSYNC_B: 0x03080302
(WW) INTEL(0): VCLK_DIVIS: 0x00021207
(WW) INTEL(0): VCLK_DIVIS: 0x00031406
(WW) INTEL(0): VCLK_POST_: 0x0000888b
(WW) INTEL(0): VGACNTRL: 0x80000000
(II) INTEL(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) INTEL(0): Backing store disabled
(==) INTEL(0): Silken mouse enabled
(II) INTEL(0): Initializing HW Cursor
(**) Option "dpms"
(**) INTEL(0): DPMS enabled
(II) INTEL(0): X context handle = 0x1
(II) INTEL(0): [drm] installed DRM signal handler
(II) INTEL(0): [DRI] installation complete
(II) INTEL(0): direct rendering: Enabled
(II) INTEL(0): RandR enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
error opening security policy file /usr/lib/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Generic Keyboard: XkbModel: "pc104"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) Synaptics touchpad driver version 0.14.3
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event3
(**) Option "Device" "/dev/input/event3"
(**) Option "HorizScrollDelta" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc104)+fr" };
xkb_geometry { include "pc(pc104)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad touchpad found
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0 63.34 1024 1072 1176 1328 768 769 772 795 (47.7 kHz)
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc104)+fr" };
xkb_geometry { include "pc(pc104)" };
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'

Bonne soiree!

inbox · Le 18/03/2007, à 20:20

Salut,

Voir ici aussi, car tu n'as pas toutes les options nécessaires dans ton xorg.conf.

En autre

Option "XAANoOffscreenPixmaps"

qui manque dans la section "Device" et

Load "dbe"

dans la section "Module".

A+

[EDIT] Il te faudra, peut-être, aussi modifier la Section "ServerLayout" pour y ajouter

Option "AIGLX" "true"

, ceci afin de forcer l'utilisation de AIGLX.

Dernière modification par inbox (Le 18/03/2007, à 20:34)

Stickmaniake · Le 24/03/2007, à 00:08

Bonsoir inbox, desole pour le rettard avec lequel je poste. J'ais suivie les manips du lien que tu m'as donner et celles que tu penses etre les bonnes mais rien, toujour le haut des fenetres qui disparait quand je lance beryl...
help pleas

inbox · Le 24/03/2007, à 02:43

Pour voir les modifs que tu as faite, colles ton xorg.conf. et le contenu de

cat /var/log/Xorg.0.log

mais avec les balises "Code", ça évite d'avoir un post trop long.

A+

Stickmaniake · Le 25/03/2007, à 15:37

Voici :
Le xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
Load "dbe"
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"fr"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Intel Corporation 82852/855GM Integrated Graphics Device"
	Driver		"intel"
        Option "XAANoOffscreenPixmaps"
	BusID		"PCI:0:2:0"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	HorizSync	28-51
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation 82852/855GM Integrated Graphics Device"
	Monitor		"Écran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
Option "AIGLX" "true"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

Puis le Xorg.0.log:

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux camille-laptop 2.6.15-26-386 #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006 i686
Build Date: 07 July 2006
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 19:53:52 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Écran générique"
(**) |   |-->Device "Intel Corporation 82852/855GM Integrated Graphics Device"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(**) |-->Input Device "Synaptics Touchpad"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
        Entry deleted from font path.
(**) FontPath set to:
        /usr/share/X11/fonts/misc,
        /usr/share/X11/fonts/100dpi/:unscaled,
        /usr/share/X11/fonts/75dpi/:unscaled,
        /usr/share/X11/fonts/Type1,
        /usr/share/X11/fonts/100dpi,
        /usr/share/X11/fonts/75dpi,
        /usr/share/fonts/X11/misc,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        /usr/share/fonts/X11/misc/,
        /usr/share/fonts/X11/TTF/,
        /usr/share/fonts/X11/OTF,
        /usr/share/fonts/X11/Type1/,
        /usr/share/fonts/X11/CID/,
        /usr/share/fonts/X11/100dpi/,
        /usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AIGLX" "true"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 1.0
        X.Org XInput driver : 0.6
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3580 card 1631,d004 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 8086,3584 card 1631,d004 rev 02 class 08,80,00 hdr 00
(II) PCI: 00:00:3: chip 8086,3585 card 1631,d004 rev 02 class 08,80,00 hdr 80
(II) PCI: 00:02:0: chip 8086,3582 card 1631,d004 rev 02 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,3582 card 1631,d004 rev 02 class 03,80,00 hdr 80
(II) PCI: 00:1d:0: chip 8086,24c2 card 1631,d004 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1631,d004 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1631,d004 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1631,d004 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1631,d004 rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1631,d004 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1631,d004 rev 03 class 07,03,00 hdr 00
(II) PCI: 01:01:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 01:02:0: chip 1106,3106 card 1631,d004 rev 8b class 02,00,00 hdr 00
(II) PCI: 01:03:0: chip 104c,ac50 card c400,0000 rev 02 class 06,07,00 hdr 02
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,5), BCTRL: 0x0802 (VGA_EN is cleared)
(II) Bus 1 I/O range:
        [0] -1  0       0x0000c000 - 0x0000dfff (0x2000) IX[b]
(II) Bus 1 non-prefetchable memory range:
        [0] -1  0       0xe0000000 - 0xefffffff (0x10000000) MX[b]
(II) Bus 1 prefetchable memory range:
        [0] -1  0       0xa0000000 - 0xafffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (1:3:0), (1,2,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
        [0] -1  0       0x0000c400 - 0x0000c4ff (0x100) IX[b]
        [1] -1  0       0x0000c800 - 0x0000c8ff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
        [0] -1  0       0xe2000000 - 0xe3ffffff (0x2000000) MX[b]
(II) Bus 2 prefetchable memory range:
        [0] -1  0       0xa0000000 - 0xa1ffffff (0x2000000) MX[b]
(--) PCI:*(0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xb0000000/27, 0xf0000000/19, I/O @ 0xe000/3
(--) PCI: (0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0x40000000/27, 0x48000000/19
(II) Addressable bus resource ranges are
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[b]
        [1] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [5] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
        [0] -1  0       0xe0000000 - 0xe00000ff (0x100) MX[b]
        [1] -1  0       0xe0001000 - 0xe0001fff (0x1000) MX[b]
        [2] -1  0       0xf0080600 - 0xf00806ff (0x100) MX[b]
        [3] -1  0       0xf0080400 - 0xf00805ff (0x200) MX[b]
        [4] -1  0       0x48080000 - 0x480803ff (0x400) MX[b]
        [5] -1  0       0xfebff000 - 0xfebff3ff (0x400) MX[b]
        [6] -1  0       0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
        [7] -1  0       0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
        [8] -1  0       0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [9] -1  0       0x0000e400 - 0x0000e47f (0x80) IX[b]
        [10] -1 0       0x0000e300 - 0x0000e3ff (0x100) IX[b]
        [11] -1 0       0x0000e200 - 0x0000e23f (0x40) IX[b]
        [12] -1 0       0x0000e100 - 0x0000e1ff (0x100) IX[b]
        [13] -1 0       0x00001400 - 0x0000141f (0x20) IX[b]
        [14] -1 0       0x00001100 - 0x0000110f (0x10) IX[b]
        [15] -1 0       0x00001600 - 0x0000161f (0x20) IX[b]
        [16] -1 0       0x00001200 - 0x0000121f (0x20) IX[b]
        [17] -1 0       0x0000e000 - 0x0000e007 (0x8) IX[b](B)
(II) Inactive PCI resource ranges:
        [0] -1  0       0x48000000 - 0x4807ffff (0x80000) MX[b](B)
        [1] -1  0       0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0       0xe0000000 - 0xe00000ff (0x100) MX[b]
        [1] -1  0       0xe0001000 - 0xe0001fff (0x1000) MX[b]
        [2] -1  0       0xf0080600 - 0xf00806ff (0x100) MX[b]
        [3] -1  0       0xf0080400 - 0xf00805ff (0x200) MX[b]
        [4] -1  0       0x48080000 - 0x480803ff (0x400) MX[b]
        [5] -1  0       0xfebff000 - 0xfebff3ff (0x400) MX[b]
        [6] -1  0       0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
        [7] -1  0       0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
        [8] -1  0       0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [9] -1  0       0x0000e400 - 0x0000e47f (0x80) IX[b]
        [10] -1 0       0x0000e300 - 0x0000e3ff (0x100) IX[b]
        [11] -1 0       0x0000e200 - 0x0000e23f (0x40) IX[b]
        [12] -1 0       0x0000e100 - 0x0000e1ff (0x100) IX[b]
        [13] -1 0       0x00001400 - 0x0000141f (0x20) IX[b]
        [14] -1 0       0x00001100 - 0x0000110f (0x10) IX[b]
        [15] -1 0       0x00001600 - 0x0000161f (0x20) IX[b]
        [16] -1 0       0x00001200 - 0x0000121f (0x20) IX[b]
        [17] -1 0       0x0000e000 - 0x0000e007 (0x8) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
        [0] -1  0       0x48000000 - 0x4807ffff (0x80000) MX[b](B)
        [1] -1  0       0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [5] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1  0       0xe0000000 - 0xe00000ff (0x100) MX[b]
        [5] -1  0       0xe0001000 - 0xe0001fff (0x1000) MX[b]
        [6] -1  0       0xf0080600 - 0xf00806ff (0x100) MX[b]
        [7] -1  0       0xf0080400 - 0xf00805ff (0x200) MX[b]
        [8] -1  0       0x48080000 - 0x480803ff (0x400) MX[b]
        [9] -1  0       0xfebff000 - 0xfebff3ff (0x400) MX[b]
        [10] -1 0       0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
        [11] -1 0       0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
        [12] -1 0       0x48000000 - 0x4807ffff (0x80000) MX[b](B)
        [13] -1 0       0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
        [14] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [15] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [16] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [17] -1 0       0x0000e400 - 0x0000e47f (0x80) IX[b]
        [18] -1 0       0x0000e300 - 0x0000e3ff (0x100) IX[b]
        [19] -1 0       0x0000e200 - 0x0000e23f (0x40) IX[b]
        [20] -1 0       0x0000e100 - 0x0000e1ff (0x100) IX[b]
        [21] -1 0       0x00001400 - 0x0000141f (0x20) IX[b]
        [22] -1 0       0x00001100 - 0x0000110f (0x10) IX[b]
        [23] -1 0       0x00001600 - 0x0000161f (0x20) IX[b]
        [24] -1 0       0x00001200 - 0x0000121f (0x20) IX[b]
        [25] -1 0       0x0000e000 - 0x0000e007 (0x8) IX[b](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.2.0
        ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 7.1.1, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.1.0
        ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module i810: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.6.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.3
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
        compiled for 4.3.99.902, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
(II) Wacom driver level: 47-0.7.2 $
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
        compiled for 4.3.99.902, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
(II) INTEL: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM
(II) Primary Device is: PCI 00:02:0
(--) Chipset 852GM/855GM found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1  0       0xe0000000 - 0xe00000ff (0x100) MX[b]
        [5] -1  0       0xe0001000 - 0xe0001fff (0x1000) MX[b]
        [6] -1  0       0xf0080600 - 0xf00806ff (0x100) MX[b]
        [7] -1  0       0xf0080400 - 0xf00805ff (0x200) MX[b]
        [8] -1  0       0x48080000 - 0x480803ff (0x400) MX[b]
        [9] -1  0       0xfebff000 - 0xfebff3ff (0x400) MX[b]
        [10] -1 0       0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
        [11] -1 0       0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
        [12] -1 0       0x48000000 - 0x4807ffff (0x80000) MX[b](B)
        [13] -1 0       0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
        [14] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [15] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [16] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [17] -1 0       0x0000e400 - 0x0000e47f (0x80) IX[b]
        [18] -1 0       0x0000e300 - 0x0000e3ff (0x100) IX[b]
        [19] -1 0       0x0000e200 - 0x0000e23f (0x40) IX[b]
        [20] -1 0       0x0000e100 - 0x0000e1ff (0x100) IX[b]
        [21] -1 0       0x00001400 - 0x0000141f (0x20) IX[b]
        [22] -1 0       0x00001100 - 0x0000110f (0x10) IX[b]
        [23] -1 0       0x00001600 - 0x0000161f (0x20) IX[b]
        [24] -1 0       0x00001200 - 0x0000121f (0x20) IX[b]
        [25] -1 0       0x0000e000 - 0x0000e007 (0x8) IX[b](B)
(II) resource ranges after probing:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1  0       0xe0000000 - 0xe00000ff (0x100) MX[b]
        [5] -1  0       0xe0001000 - 0xe0001fff (0x1000) MX[b]
        [6] -1  0       0xf0080600 - 0xf00806ff (0x100) MX[b]
        [7] -1  0       0xf0080400 - 0xf00805ff (0x200) MX[b]
        [8] -1  0       0x48080000 - 0x480803ff (0x400) MX[b]
        [9] -1  0       0xfebff000 - 0xfebff3ff (0x400) MX[b]
        [10] -1 0       0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
        [11] -1 0       0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
        [12] -1 0       0x48000000 - 0x4807ffff (0x80000) MX[b](B)
        [13] -1 0       0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
        [14] 1  0       0x000a0000 - 0x000affff (0x10000) MS[b]
        [15] 1  0       0x000b0000 - 0x000b7fff (0x8000) MS[b]
        [16] 1  0       0x000b8000 - 0x000bffff (0x8000) MS[b]
        [17] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [18] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [19] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [20] -1 0       0x0000e400 - 0x0000e47f (0x80) IX[b]
        [21] -1 0       0x0000e300 - 0x0000e3ff (0x100) IX[b]
        [22] -1 0       0x0000e200 - 0x0000e23f (0x40) IX[b]
        [23] -1 0       0x0000e100 - 0x0000e1ff (0x100) IX[b]
        [24] -1 0       0x00001400 - 0x0000141f (0x20) IX[b]
        [25] -1 0       0x00001100 - 0x0000110f (0x10) IX[b]
        [26] -1 0       0x00001600 - 0x0000161f (0x20) IX[b]
        [27] -1 0       0x00001200 - 0x0000121f (0x20) IX[b]
        [28] -1 0       0x0000e000 - 0x0000e007 (0x8) IX[b](B)
        [29] 1  0       0x000003b0 - 0x000003bb (0xc) IS[b]
        [30] 1  0       0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.0
(**) INTEL(0): Depth 24, (--) framebuffer bpp 32
(==) INTEL(0): RGB weight 888
(==) INTEL(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) INTEL(0): initializing int10
(WW) INTEL(0): Bad V_BIOS checksum
(II) INTEL(0): Primary V_BIOS segment is: 0xc000
(II) INTEL(0): VESA BIOS detected
(II) INTEL(0): VESA VBE Version 3.0
(II) INTEL(0): VESA VBE Total Mem: 32576 kB
(II) INTEL(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) INTEL(0): VESA VBE OEM Software Rev: 1.0
(II) INTEL(0): VESA VBE OEM Vendor: Intel Corporation
(II) INTEL(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) INTEL(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) INTEL(0): Integrated Graphics Chipset: Intel(R) 855GME
(--) INTEL(0): Chipset: "852GM/855GM"
(--) INTEL(0): Linear framebuffer at 0xB0000000
(--) INTEL(0): IO registers at addr 0xF0000000
(II) INTEL(0): 2 display pipes available.
(II) INTEL(0): detected 32636 kB stolen memory.
(II) INTEL(0): Kernel reported 232704 total, 1 used
(II) INTEL(0): I830CheckAvailableMemory: 930812 kB available
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules/libi2c.so
(II) INTEL(0): I2C bus "CRTDDC_A" initialized.
(II) INTEL(0): I2C bus "LVDSDDC_C" initialized.
(II) INTEL(0): I2C bus "DVODDC_D" initialized.
(II) INTEL(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers/sil164.so
(II) Module sil164: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.0
(EE) INTEL(0): detecting sil164
(EE) INTEL(0): Unable to read from DVOI2C_E Slave 112.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers/ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.0
(EE) INTEL(0): detecting ch7xxx
(EE) INTEL(0): Unable to read from DVOI2C_E Slave 236.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(EE) INTEL(0): DDC Analog 0, 00005010
(II) INTEL(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "LVDSDDC_C:ddc2" removed.
(EE) INTEL(0): DDC LVDS 1, 00005018
(II) INTEL(0): I2C device "DVODDC_D:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "DVODDC_D:ddc2" removed.
(EE) INTEL(0): DDC DVO 2, 0000501C
(II) INTEL(0): Found BDB block type 254
(II) INTEL(0): Found BDB block type 1
(II) INTEL(0): Found BDB block type 254
(II) INTEL(0): Found BDB block type 2
(II) INTEL(0): Found BDB block type 3
(II) INTEL(0): Found BDB block type 4
(II) INTEL(0): Found BDB block type 254
(II) INTEL(0): Found BDB block type 5
(II) INTEL(0): Found BDB block type 6
(II) INTEL(0): Found BDB block type 7
(II) INTEL(0): Found BDB block type 8
(II) INTEL(0): Found BDB block type 10
(II) INTEL(0): Found BDB block type 11
(II) INTEL(0): Found BDB block type 12
(II) INTEL(0): Found BDB block type 13
(II) INTEL(0): Found BDB block type 14
(II) INTEL(0): Found BDB block type 15
(II) INTEL(0): Found BDB block type 16
(II) INTEL(0): Found BDB block type 17
(II) INTEL(0): Found BDB block type 18
(II) INTEL(0): Found BDB block type 19
(II) INTEL(0): Found BDB block type 20
(II) INTEL(0): Found BDB block type 40
(II) INTEL(0): Found BDB block type 41
(II) INTEL(0): Found panel of size 1024x768 in BIOS VBT tables
(II) INTEL(0): Found BDB block type 42
(II) INTEL(0): Found BDB block type 43
(II) INTEL(0): Found BDB block type 44
(II) INTEL(0): Monitoring connected displays enabled
(--) INTEL(0): Pre-allocated VideoRAM: 32636 kByte
(==) INTEL(0): VideoRAM: 65536 kByte
(==) INTEL(0): video overlay key set to 0x101fe
(**) INTEL(0): page flipping disabled
(==) INTEL(0): Using gamma correction (1.0, 1.0, 1.0)
Executing (ax == 0x5f01) BIOS call at ../../src/i830_driver.c:617
(II) INTEL(0): BIOS Build: 3104
(II) INTEL(0): Using new Pipe switch code
(==) INTEL(0): Device Presence: disabled.
(II) INTEL(0): No active displays on Pipe A.
(II) INTEL(0): Currently active displays on Pipe B:
(II) INTEL(0):  LFP (local flat panel)
(==) INTEL(0): Display is using Pipe B
(--) INTEL(0): Maximum frambuffer space: 65368 kByte
(--) INTEL(0): Maximum space available for video modes: 32576 kByte
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): move blank start from 1024 to 1024
(--) INTEL(0): Virtual size is 1024x768 (pitch 1024)
(**) INTEL(0): *Mode "1024x768x60"
(==) INTEL(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.2.0
        ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.0
(==) INTEL(0): VBE Restore workaround: enabled.
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.1.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 1   0       0xf0000000 - 0xf007ffff (0x80000) MS[b]
        [1] 1   0       0xb0000000 - 0xb7ffffff (0x8000000) MS[b]
        [2] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [3] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [4] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [5] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [6] -1  0       0xe0000000 - 0xe00000ff (0x100) MX[b]
        [7] -1  0       0xe0001000 - 0xe0001fff (0x1000) MX[b]
        [8] -1  0       0xf0080600 - 0xf00806ff (0x100) MX[b]
        [9] -1  0       0xf0080400 - 0xf00805ff (0x200) MX[b]
        [10] -1 0       0x48080000 - 0x480803ff (0x400) MX[b]
        [11] -1 0       0xfebff000 - 0xfebff3ff (0x400) MX[b]
        [12] -1 0       0xf0000000 - 0xf007ffff (0x80000) MX[b](B)
        [13] -1 0       0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
        [14] -1 0       0x48000000 - 0x4807ffff (0x80000) MX[b](B)
        [15] -1 0       0x40000000 - 0x47ffffff (0x8000000) MX[b](B)
        [16] 1  0       0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
        [17] 1  0       0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
        [18] 1  0       0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
        [19] 1  0       0x0000e000 - 0x0000e007 (0x8) IS[b]
        [20] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [21] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [22] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [23] -1 0       0x0000e400 - 0x0000e47f (0x80) IX[b]
        [24] -1 0       0x0000e300 - 0x0000e3ff (0x100) IX[b]
        [25] -1 0       0x0000e200 - 0x0000e23f (0x40) IX[b]
        [26] -1 0       0x0000e100 - 0x0000e1ff (0x100) IX[b]
        [27] -1 0       0x00001400 - 0x0000141f (0x20) IX[b]
        [28] -1 0       0x00001100 - 0x0000110f (0x10) IX[b]
        [29] -1 0       0x00001600 - 0x0000161f (0x20) IX[b]
        [30] -1 0       0x00001200 - 0x0000121f (0x20) IX[b]
        [31] -1 0       0x0000e000 - 0x0000e007 (0x8) IX[b](B)
        [32] 1  0       0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
        [33] 1  0       0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) INTEL(0): Rotating to 0 degrees
Executing (ax == 0x5f1c) BIOS call at ../../src/i830_driver.c:585
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) INTEL(0): initializing int10
(WW) INTEL(0): Bad V_BIOS checksum
(II) INTEL(0): Primary V_BIOS segment is: 0xc000
(II) INTEL(0): VESA BIOS detected
(II) INTEL(0): VESA VBE Version 3.0
(II) INTEL(0): VESA VBE Total Mem: 32576 kB
(II) INTEL(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) INTEL(0): VESA VBE OEM Software Rev: 1.0
(II) INTEL(0): VESA VBE OEM Vendor: Intel Corporation
(II) INTEL(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) INTEL(0): VESA VBE OEM Product Rev: Hardware Version 0.0
Executing (ax == 0x5f1c) BIOS call at ../../src/i830_driver.c:585
(II) INTEL(0): Allocated 128 kB for the ring buffer at 0x0
(II) INTEL(0): Allocating at least 512 scanlines for pixmap cache
(II) INTEL(0): Initial framebuffer allocation size: 6144 kByte
(II) INTEL(0): Allocated 4 kB for HW cursor at 0x7fff000 (0x37cfa000)
(II) INTEL(0): Allocated 16 kB for HW (ARGB) cursor at 0x7ffb000 (0x355e4000)
(II) INTEL(0): Allocated 4 kB for Overlay registers at 0x7ffa000 (0x356a2000).
(II) INTEL(0): Allocated 64 kB for the scratch buffer at 0x7fea000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) INTEL(0): [drm] loaded kernel module for "i915" driver
(II) INTEL(0): [drm] DRM interface version 1.2
(II) INTEL(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) INTEL(0): [drm] added 8192 byte SAREA at 0xf8d00000
(II) INTEL(0): [drm] mapped SAREA 0xf8d00000 to 0xb7ac8000
(II) INTEL(0): [drm] framebuffer handle = 0xb0020000
(II) INTEL(0): [drm] added 1 reserved context for kernel
(II) INTEL(0): Allocated 32 kB for the logical context at 0x7fe2000.
(II) INTEL(0): Allocated 3072 kB for the back buffer at 0x7800000.
(II) INTEL(0): Allocated 3072 kB for the depth buffer at 0x7400000.
(II) INTEL(0): Allocated 52992 kB for textures at 0x620000
(II) INTEL(0): 0x81fe82c: Memory at offset 0x00020000, size 6144 kBytes
(II) INTEL(0): 0x81fdfc0: Memory at offset 0x07fff000, size 4 kBytes
(II) INTEL(0): 0x82009d8: Memory at offset 0x07ffb000, size 16 kBytes
(II) INTEL(0): 0x81fff1c: Memory at offset 0x00000000, size 128 kBytes
(II) INTEL(0): 0x81fe86c: Memory at offset 0x07fea000, size 64 kBytes
(II) INTEL(0): 0x82005b0: Memory at offset 0x07ffa000, size 4 kBytes
(II) INTEL(0): 0x81fe9ac: Memory at offset 0x07fe2000, size 32 kBytes
(II) INTEL(0): 0x81fe948: Memory at offset 0x07800000, size 3072 kBytes
(II) INTEL(0): 0x81fe968: Memory at offset 0x07400000, size 3072 kBytes
(II) INTEL(0): 0x81fe988: Memory at offset 0x00620000, size 52992 kBytes
(II) INTEL(0): Activating tiled memory for the back buffer.
(II) INTEL(0): Activating tiled memory for the depth buffer.
(II) INTEL(0): [drm] Registers = 0xf0000000
(II) INTEL(0): [drm] ring buffer = 0xb0000000
(II) INTEL(0): [drm] init sarea width,height = 1024 x 768 (pitch 1024)
(II) INTEL(0): [drm] Mapping front buffer
(II) INTEL(0): [drm] Front Buffer = 0xb0020000
(II) INTEL(0): [drm] Back Buffer = 0xb7800000
(II) INTEL(0): [drm] Depth Buffer = 0xb7400000
(II) INTEL(0): [drm] textures = 0xb0620000
(II) INTEL(0): [drm] Initialized kernel agp heap manager, 54263808
(II) INTEL(0): [drm] dma control initialized, using IRQ 10
(II) INTEL(0): [dri] visual configs initialized
(==) INTEL(0): Write-combining range (0xb0000000,0x8000000)
(II) INTEL(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) INTEL(0): PIPEACONF is 0x80000000
(II) INTEL(0): PIPEBCONF is 0x80000000
(II) INTEL(0): xf86BindGARTMemory: bind key 7 at 0x01fdf000 (pgoffset 8159)
(II) INTEL(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) INTEL(0): xf86BindGARTMemory: bind key 1 at 0x07ffb000 (pgoffset 32763)
(II) INTEL(0): xf86BindGARTMemory: bind key 3 at 0x07fea000 (pgoffset 32746)
(II) INTEL(0): xf86BindGARTMemory: bind key 2 at 0x07ffa000 (pgoffset 32762)
(II) INTEL(0): xf86BindGARTMemory: bind key 4 at 0x07fe2000 (pgoffset 32738)
(II) INTEL(0): xf86BindGARTMemory: bind key 5 at 0x07800000 (pgoffset 30720)
(II) INTEL(0): xf86BindGARTMemory: bind key 6 at 0x07400000 (pgoffset 29696)
(EE) INTEL(0): Choosing pipe 1's mode 1024x768@60.0 instead of xf86 mode 1024x768@60.0
(II) INTEL(0): Requested pix clock: 63345
hact: 1024 htot: 1344 hbstart: 1024 hbend: 1344 hsyncstart: 1048 hsyncend: 1184
vact: 768 vtot: 806 vbstart: 768 vbend: 806 vsyncstart: 771 vsyncend: 777
pipesrc: 1024x768, dspsize: 1024x768
chosen: dotclock 65000 ((23, 15), 6, (4, 4))
clock regs: 0x90820000, 0x0004150d
(II) INTEL(0): Mode bandwidth is 47 Mpixel/s
(II) INTEL(0): Disabling unused functions
(II) INTEL(0): Disabling pipe A
(II) INTEL(0): Disabling DPLL A
(II) INTEL(0): Display plane A is now disabled and connected to Pipe A.
(II) INTEL(0): Display plane B is now enabled and connected to Pipe B.
(WW) INTEL(0):       ADPA: 0x40009c18
(WW) INTEL(0):       LVDS: 0xc0000300
(WW) INTEL(0):       DVOA: 0x00000000
(WW) INTEL(0):       DVOB: 0x00000000
(WW) INTEL(0):       DVOC: 0x00000000
(WW) INTEL(0): DVOA_SRCDI: 0x00000000
(WW) INTEL(0): DVOB_SRCDI: 0x00000000
(WW) INTEL(0): DVOC_SRCDI: 0x00000000
(WW) INTEL(0): PP_CONTROL: 0x00000001
(WW) INTEL(0):  PP_STATUS: 0x4800000b
(WW) INTEL(0): PFIT_CONTR: 0x80000668
(WW) INTEL(0): PFIT_PGM_R: 0x00000000
(WW) INTEL(0): PORT_HOTPL: 0x00000000
(WW) INTEL(0): PORT_HOTPL: 0x00000000
(WW) INTEL(0):   DSPACNTR: 0x00000000
(WW) INTEL(0): DSPASTRIDE: 0x00000000
(WW) INTEL(0):    DSPAPOS: 0x00000000
(WW) INTEL(0):   DSPASIZE: 0x00000000
(WW) INTEL(0):   DSPABASE: 0x00000000
(WW) INTEL(0):  PIPEACONF: 0x00000000
(WW) INTEL(0):   PIPEASRC: 0x027f01df
(WW) INTEL(0):       FPA0: 0x00021207
(WW) INTEL(0):       FPA1: 0x00021207
(WW) INTEL(0):     DPLL_A: 0x008b0000
(WW) INTEL(0):   HTOTAL_A: 0x031f027f
(WW) INTEL(0):   HBLANK_A: 0x03170287
(WW) INTEL(0):    HSYNC_A: 0x02ef028f
(WW) INTEL(0):   VTOTAL_A: 0x020c01df
(WW) INTEL(0):   VBLANK_A: 0x020401e7
(WW) INTEL(0):    VSYNC_A: 0x01eb01e9
(WW) INTEL(0):   DSPBCNTR: 0x99000000
(WW) INTEL(0): DSPBSTRIDE: 0x00001000
(WW) INTEL(0):    DSPBPOS: 0x00000000
(WW) INTEL(0):   DSPBSIZE: 0x02ff03ff
(WW) INTEL(0):   DSPBBASE: 0x00020000
(WW) INTEL(0):  PIPEBCONF: 0x80000000
(WW) INTEL(0):   PIPEBSRC: 0x03ff02ff
(WW) INTEL(0):       FPB0: 0x0004150d
(WW) INTEL(0):       FPB1: 0x00021207
(WW) INTEL(0):     DPLL_B: 0x90820000
(WW) INTEL(0):   HTOTAL_B: 0x053f03ff
(WW) INTEL(0):   HBLANK_B: 0x053f03ff
(WW) INTEL(0):    HSYNC_B: 0x049f0417
(WW) INTEL(0):   VTOTAL_B: 0x032502ff
(WW) INTEL(0):   VBLANK_B: 0x032502ff
(WW) INTEL(0):    VSYNC_B: 0x03080302
(WW) INTEL(0): VCLK_DIVIS: 0x00021207
(WW) INTEL(0): VCLK_DIVIS: 0x00031406
(WW) INTEL(0): VCLK_POST_: 0x0000888b
(WW) INTEL(0):   VGACNTRL: 0x80000000
(**) INTEL(0): Option "XaaNoOffscreenPixmaps"
(II) INTEL(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Horizontal and Vertical Lines
        Setting up tile and stipple cache:
                16 128x128 slots
                4 256x256 slots
(==) INTEL(0): Backing store disabled
(==) INTEL(0): Silken mouse enabled
(II) INTEL(0): Initializing HW Cursor
(**) Option "dpms"
(**) INTEL(0): DPMS enabled
(II) INTEL(0): X context handle = 0x1
(II) INTEL(0): [drm] installed DRM signal handler
(II) INTEL(0): [DRI] installation complete
(II) INTEL(0): direct rendering: Enabled
(II) INTEL(0): RandR enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
error opening security policy file /usr/lib/xserver/SecurityPolicy
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Generic Keyboard: XkbModel: "pc104"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) Synaptics touchpad driver version 0.14.3
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event2
(**) Option "Device" "/dev/input/event2"
(**) Option "HorizScrollDelta" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
    xkb_keycodes             { include "xfree86+aliases(azerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc104)+fr" };
    xkb_geometry             { include "pc(pc104)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Invalid argument
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad touchpad found
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): Valid mode using panel fitting: 1024x768x60
(II) INTEL(0): Total number of valid FP mode(s) found: 7
(II) INTEL(0): Printing probed modes for pipe 1
(II) INTEL(0): Not using mode "640x480x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "720x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x400x60" (bad mode clock/interlace/doublescan)
(II) INTEL(0): Not using mode "640x350x60" (bad mode clock/interlace/doublescan)
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) INTEL(0): I2C device "CRTDDC_A:ddc2" removed.
(II) INTEL(0): Printing probed modes for pipe 0
(II) INTEL(0): Modes post revalidate
(EE) INTEL(0): Modeline "1024x768x60"x60.0   63.34  1024 1072 1176 1328  768 769 772 795 (47.7 kHz)
    xkb_keycodes             { include "xfree86+aliases(azerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc104)+fr" };
    xkb_geometry             { include "pc(pc104)" };
AUDIT: Fri Mar 23 23:03:04 2007: 4688 X: client 24 rejected from local host
AUDIT: Fri Mar 23 23:03:04 2007: 4688 X: client 24 rejected from local host
AUDIT: Fri Mar 23 23:05:25 2007: 4688 X: client 24 rejected from local host
AUDIT: Fri Mar 23 23:05:25 2007: 4688 X: client 24 rejected from local host
AUDIT: Fri Mar 23 23:05:25 2007: 4688 X: client 24 rejected from local host
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
FreeType: couldn't find encoding 'jisx0208.1983-0' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/kochi-gothic-subst.ttf'
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)

inbox · Le 25/03/2007, à 20:04

Salut,

Essayes d'enlever

        Option "XAANoOffscreenPixmaps"

dans la Section "Device".

Puis tu ajoutes

    Option         "AddARGBGLXVisuals" "On"
    Option         "XAANoOffscreenPixmaps"
    Option         "RenderAccel" "true"

dans Section "Screen" après DefaultDepth 24.

Ceci fait tu redémarres X.

A+

Stickmaniake · Le 26/03/2007, à 23:11

Merci inbox, d'après ton assurance dans le dernier post je me disais que j'allais enfin pouvoir faire "Wouuuuah" devant mon bureau...mais élasse, avant même d'avoir pu faire les manips dans le Xorg.conf,
mon pc (celui avec Kunbuntu) a planter, au boot, impossible de démarrer Kunbuntu correctement...

-Soit le Grub ne charge pas: ERROR 16 (ou quelque chose comme ca)
-Soit le chargement commence et passe en mode console a partir de "*Reading files needed to boot..."
pour finalement ne pas aboutir...
-Soit, encore plus simple, le Grub ne commence même pas a charger, comme si aucun OS n'était installé
et un gestionaire de boot apparait...

Je commence a être désèspéré... J'ais envie de réinstaller à partir du live cd...donc tout effacé pour tout recomencer...(je n'ais pas dutout envie de me retaper toute les galères des manips).
Je me demandais aussi s'il existait un live cd avec l'OS+beryl intégré...
Existe t-il une solution avant que je balance mon pc par la fenêtre?

help pleas...

inbox · Le 27/03/2007, à 01:25

Salut,

J'ai eu une erreur un peu bizarre il y a deux semaines (avec un disque SATA). C'était suite à des problèmes de démarrage de plus en plus courrants, jusqu'à ne plus pouvoir démarrer. En cherchant sur internet, je n'ai pas trouvé grand chose, sauf qu'éventuellement, il y avait un problème disque ou contrôleur. Comme mon disque dur est récent (ce qui ne veut rien dire ) j'ai tenté d'utiliser un autre port SATA sur la carte mère. Et ............... bingo, depuis ce changement tout fonctionne normallement.

Donc si c'est possible pour toi essayes ça !

A+

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 14/03/2007, à 23:03

beryl plante "gentiment"

#2 Le 15/03/2007, à 00:50

Re : beryl plante "gentiment"

#3 Le 15/03/2007, à 01:42

Re : beryl plante "gentiment"

#4 Le 15/03/2007, à 02:34

Re : beryl plante "gentiment"

#5 Le 15/03/2007, à 09:45

Re : beryl plante "gentiment"

#6 Le 15/03/2007, à 14:58

Re : beryl plante "gentiment"

#7 Le 15/03/2007, à 20:31

Re : beryl plante "gentiment"

#8 Le 15/03/2007, à 22:43

Re : beryl plante "gentiment"

#9 Le 15/03/2007, à 23:57

Re : beryl plante "gentiment"

#10 Le 16/03/2007, à 00:16

Re : beryl plante "gentiment"

#11 Le 16/03/2007, à 03:09

Re : beryl plante "gentiment"

#12 Le 16/03/2007, à 12:29

Re : beryl plante "gentiment"

#13 Le 16/03/2007, à 12:45

Re : beryl plante "gentiment"

#14 Le 16/03/2007, à 18:24

Re : beryl plante "gentiment"

#15 Le 16/03/2007, à 23:18

Re : beryl plante "gentiment"

#16 Le 17/03/2007, à 02:08

Re : beryl plante "gentiment"

#17 Le 17/03/2007, à 23:05

Re : beryl plante "gentiment"

#18 Le 18/03/2007, à 00:40

Re : beryl plante "gentiment"

#19 Le 18/03/2007, à 20:20

Re : beryl plante "gentiment"

#20 Le 24/03/2007, à 00:08

Re : beryl plante "gentiment"

#21 Le 24/03/2007, à 02:43

Re : beryl plante "gentiment"

#22 Le 25/03/2007, à 15:37

Re : beryl plante "gentiment"

#23 Le 25/03/2007, à 20:04

Re : beryl plante "gentiment"

#24 Le 26/03/2007, à 23:11

Re : beryl plante "gentiment"

#25 Le 27/03/2007, à 01:25

Re : beryl plante "gentiment"

Pied de page des forums