Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 18/03/2007, à 15:02

Scrat38

Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Bonjour à tous et désolé pour cet ènième forum sur beryl mais si j'en crée un nouveau aujourd'hui c'est que je n'ai pas trouvé la solution dans les existants (et j'ai cherché...)

Mon problème est le suivant :
Cela fait déjà un petit moment que j'essaye d'installer beryl et j'ai a peu pres essayer toutes les combines :
drivers libre, proprio, XGL pas XGL sans succès...

Voici ou j'en suit :
J'ai configuré mon xorg.conf avec le driver libre radeon (j'ai entendu dire que AIGLX était compatible et comme XGL buggait...) et installé beryl. Lorsque je lance beryl cela donne :

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Et à ce moment ça freeze, Ctrl+Alt+backspace inéfficace...

Je fournis mon xorg.conf si ca peut aider.

Section "Module"
  Load "dri"
  Load "dbe"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "GLcore"
  load "v4l"
EndSection

Section "Extensions"
	Option "Composite" "Enable"
        Option "RENDER" "Enable"
EndSection

Section "Device"

  Identifier "ATI Technologies, Inc. R430 UM [Radeon X800 XL] (PCIe)"
  Boardname "radeon"
  BusID "PCI:2:0:0"
  Driver "radeon"
  Option "DRI" "true"
  Option "XAANoOffscreenPixmaps" "true"
  Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
  Option "AccelDFS"    "1" # mettez à 0 si vous avez une carte AGP
  Option "GARTSize" "64"
  Option "RingSize" "8"
  Option "BufferSize" "2"
  Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
  Option "ColorTiling" "1"
  Option "EnableDepthMoves" "yes"
  Option "UseFBDev" "false"
  Option "RenderAccel" "true" # Enable the hardware render acceleration
  Option "mtrr" "on"
  Option  "SubPixelOrder" "none"
  Option "DPMS"
  Option "DynamicClocks" "on"
EndSection

Section "Monitor"
  identifier "Acer AL1916W"
  vendorname "Plug 'n' Play"
  modelname "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "ATI Technologies, Inc. R430 UM [Radeon X800 XL] (PCIe)"
  Monitor "Acer AL1916W"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    virtual 1600 1200
    modes "1280x960@60" "1280x1024@60" "1280x1024@75" "1280x960@75" "1152x864@75" "1400x1050@60" "1024x768@60" "1400x1050@75" "1024x768@70" "1600x1200@65" "1024x768@75" "1600x1200@60" "832x624@75" "800x600@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"

EndSection

Section "DRI"
  Group 0
  Mode 0666
EndSection

Toute aide qu'elle qu'elle soit sera la bienvenue !!!

Les ordinateurs modernes se situent quelque part entre l'obsolescence et le néant... Ouais il doit avoir raison...

Hors ligne

#2 Le 18/03/2007, à 21:23

inbox

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Salut,

Juste une petite remarque, quel foutoir ce xorg.conf yikes

Commentes 

load "glx"

et 

Option "DRI" "true"

Ré-essayes de lancer beryl.
1/ Si ça passe, mais que tu as toujours des problèmes, colles ton Xorg.0.log.
2/ Si ça ne passe toujours pas, redémarre et colles le contenu de Xorg.0.log.old

A+

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#3 Le 18/03/2007, à 21:56

Scrat38

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Merci de me répondre !!!
Pour le xorg.conf désolé il me l'a sorti comme ca à l'installation et je l'ai pas nettoyé...
Sinon j'ai fait comme tu m'as dit et du coup il me marque

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Xlib:  extension "GLX" missing on display ":0.0".
Root visual is not a GL visual
Xlib:  extension "GLX" missing on display ":0.0".
beryl: Root visual is not a GL visual
beryl: Failed to manage screen: 0
beryl: No manageable screens found on display :0.0

Au passage plus de bordures sur les fenêtres... j'ai longtemps vu ce problème sur les forums...

Sinon il faut que je poste le xorg.0.log ? parce que ce sont des gros fichiers (+ de 1000 lignes...)

Je précise que le Direct Rendering fonctionne...

Les ordinateurs modernes se situent quelque part entre l'obsolescence et le néant... Ouais il doit avoir raison...

Hors ligne

#4 Le 19/03/2007, à 17:46

4t0m!k

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Bonjour,

J'ai, je crois, un problème similaire.

je viens de passer sur Ubuntu, tant j'étais impressionné par beryl en vidéo.

J'ai donc suivi les tutoriaux qui expliquaient comment l'installer.

Bref, après quelques heures, beryl était fonctionnel en utilisant les pilotes proprio conseillés d'ubuntu et un serveur XGL.

Tout marche bien, mais, toujours en quête de "mieux" j'ai voulu passez au serveur AIGLX mieux conçu pour beryl.

J'ai aussi fait ce choix quand je me suis aperçu que World of Wacraft via Wine, ne se lançait pas avec une session XGL (Seulement en Gnome) et me met le message d'erreur "Impossible de démarrer l'accélération 3D" ou quelque chose comme ça.

Donc, pour installer AIGLX, il ne faut pas utiliser les drivers fglrx mais des drivers libres. J'ai donc suivi le tutoriel pour les installer, quoique je ne sait pas si on peut parler d'installation vu qu'il suffit de changer un mot ("fglrx") par un autre ("radeon") dans le fichier xorg.conf (Je pense plutot que ces drivers libres doivent déjà être installés sur la machine et sont appellés par "ati" et "radeon").

Mais des que je change ce mot par celui la, et que je reboot, mon écran devient noir avant la page d'ouverture de la session :/

La première fois, j'ai réinstaller tout Ubuntu, la 2e je me suis aperçus qu'on pouvait accéder au terminal sans lancer les pilotes graphiques x) et j'ai donc pu rechanger le xorg.conf via le terminal.

Quelqu'un connait-il la réponse à mon problème svp ?

Ce n'est pas XGL qui me gêne, mais c'est de ne pas pouvoir faire tourner de jeu 3D quand il est activé.

PS : Carte Graphique X800 Pro
AMD 3400+ 1Go DDR PC3200
Ecran : Hyundai en DVI (c'est peut être de la que vient le problème ?)

Sinon, dans la foulé, un autre désagrément, ma carte son ne fonctionne pas et je ne sait pas ou trouver les drivers :/, c'est une Audigy 2 ZS.

Merci beaucoup d'avance de vos réponses et désolé si je dit plein de truc faut mais je viens juste de passer à linux après 10 ans de windows :O

#5 Le 19/03/2007, à 18:24

dom le vrai

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Pour ceux qui ont installé les drivers proprios:

lorsqu'on installe les drivers proprios, il remplace un fichier (libGL.so) par le fichier proprio d'ATI. Hors, le driver libre "radeon" ne permet pas la 3D avec ce nouveau fichier libGL.so. Si vous souhaitez utiliser le driver libre, il vous faut donc d'abord désinstaller le driver "fglrx" avec la commande suivante:

sudo apt-get autoremove --purge xorg-driver-fglrx

Ensuite remplacer le driver fglrx par radeon dans le xorg.conf et redémarrer. Après redémarrage, pour voir si vous avez la 3D:

glxinfo | grep rendering

Si vous avez la 3D, vous pouvez utiliser AIGLX et Beryl.

Sinon, ben désolé... ça veut dire que le driver libre ne permet pas la 3D avec votre carte graphique, et vous êtes obligés d'utiliser cette m**** de driver proprio.

Hors ligne

#6 Le 19/03/2007, à 18:51

4t0m!k

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

A d'accord, merci, j'avais déjà fait ça mais en passant par Synaptic (supprimer les paquets fglrx).

Mais c'est normal d'avoir un écran noir juste parce que j'ai changé fglrx en radeon ? La c'est pas que j'ai pas la 3D, c'est que plus rien ne s'affiche ! :/

Je me demande si c'est à cause mon écran en DVI et pas en VGA :/

Sinon je vait essayer avec ta méthode de apt-get remove et voir ce que ça donne. je suis a 99% sur du black screen mais bon ... j'essayerai de mettre un ecran vga voir ce que ça donne.

Mais ya pas de pilotes libre à installer ? faut juste changer la ligne et ça suffit ?

Merci pour vos réponses

#7 Le 19/03/2007, à 22:56

4t0m!k

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Bonsoir !

J'ai donc remove fglrx et changé fglrx par radeon ....

Je redémarre et black screen après le chargement d'ubuntu :/

J'ai branché mon écran vga mais la il dit que le signal est hors-limite :/

Donc, j'ai fait un 

sudo dpkg-reconfigure -phigh xserver-xorg

pour re-configurer le xorg.conf...

Il y a eu un menu ou il fallait séléctionner sa carte et sa résolution, j'ai donc mis ati et 1280x1024 mais au redémarrage, black screen après le chargement d'ubuntu. :(

J'ai donc regardé le log et comme je n'y connais pas encore grand chose, je vous met tout le log et svp ne soyez pas effrayé par la longueur, ça se lis vite ^^ :

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686 
Current Operating System: Linux amd64 2.6.17-11-generic #2 SMP Thu Feb 1 19:52:28 UTC 2007 i686
Build Date: 07 July 2006
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 19 20:51:21 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/misc/,
	/usr/share/fonts/X11/TTF/,
	/usr/share/fonts/X11/OTF,
	/usr/share/fonts/X11/Type1/,
	/usr/share/fonts/X11/CID/,
	/usr/share/fonts/X11/100dpi/,
	/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.0
	X.Org XInput driver : 0.6
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3188 card 1043,80a3 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,3044 card 1043,808a rev 80 class 0c,00,10 hdr 00
(II) PCI: 00:09:0: chip 1131,7133 card 1043,4845 rev f0 class 04,80,00 hdr 00
(II) PCI: 00:0a:0: chip 11ab,4320 card 1043,811a rev 13 class 02,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
(II) PCI: 00:0d:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 00:0d:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1043,80ed rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,80b0 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,4a49 card 1043,0034 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4a69 card 1043,0035 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xfcb00000 - 0xfd0fffff (0x600000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xbca00000 - 0xdc9fffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc R420 JI [Radeon X800PRO] rev 0, Mem @ 0xd0000000/27, 0xfd000000/16, I/O @ 0xa000/8, BIOS @ 0xfcf00000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4a69) rev 0, Mem @ 0xc8000000/27, 0xfce00000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xfdb00000 - 0xfdb000ff (0x100) MX[b]
	[1] -1	0	0xfdc00000 - 0xfdc03fff (0x4000) MX[b]
	[2] -1	0	0xfdd00000 - 0xfdd007ff (0x800) MX[b]
	[3] -1	0	0xfdf00000 - 0xfdf03fff (0x4000) MX[b]
	[4] -1	0	0xfda00000 - 0xfda007ff (0x800) MX[b]
	[5] -1	0	0xfd700000 - 0xfd7007ff (0x800) MX[b]
	[6] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[7] -1	0	0xfce00000 - 0xfce0ffff (0x10000) MX[b](B)
	[8] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[9] -1	0	0xfcf00000 - 0xfcf1ffff (0x20000) MX[b](B)
	[10] -1	0	0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
	[11] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0x00001400 - 0x000014ff (0x100) IX[b]
	[13] -1	0	0x00001000 - 0x000010ff (0x100) IX[b]
	[14] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[b]
	[15] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[16] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[b]
	[17] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[18] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[19] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[20] -1	0	0x0000d000 - 0x0000d00f (0x10) IX[b]
	[21] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[b]
	[22] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[b]
	[23] -1	0	0x0000e000 - 0x0000e003 (0x4) IX[b]
	[24] -1	0	0x0000e400 - 0x0000e407 (0x8) IX[b]
	[25] -1	0	0x0000b800 - 0x0000b807 (0x8) IX[b]
	[26] -1	0	0x0000b400 - 0x0000b43f (0x40) IX[b]
	[27] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[b]
	[28] -1	0	0x0000c400 - 0x0000c47f (0x80) IX[b]
	[29] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xfdb00000 - 0xfdb000ff (0x100) MX[b]
	[1] -1	0	0xfdc00000 - 0xfdc03fff (0x4000) MX[b]
	[2] -1	0	0xfdd00000 - 0xfdd007ff (0x800) MX[b]
	[3] -1	0	0xfdf00000 - 0xfdf03fff (0x4000) MX[b]
	[4] -1	0	0xfda00000 - 0xfda007ff (0x800) MX[b]
	[5] -1	0	0xfd700000 - 0xfd7007ff (0x800) MX[b]
	[6] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[7] -1	0	0xfce00000 - 0xfce0ffff (0x10000) MX[b](B)
	[8] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[9] -1	0	0xfcf00000 - 0xfcf1ffff (0x20000) MX[b](B)
	[10] -1	0	0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
	[11] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0x00001400 - 0x000014ff (0x100) IX[b]
	[13] -1	0	0x00001000 - 0x000010ff (0x100) IX[b]
	[14] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[b]
	[15] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[16] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[b]
	[17] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[18] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[19] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[20] -1	0	0x0000d000 - 0x0000d00f (0x10) IX[b]
	[21] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[b]
	[22] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[b]
	[23] -1	0	0x0000e000 - 0x0000e003 (0x4) IX[b]
	[24] -1	0	0x0000e400 - 0x0000e407 (0x8) IX[b]
	[25] -1	0	0x0000b800 - 0x0000b807 (0x8) IX[b]
	[26] -1	0	0x0000b400 - 0x0000b43f (0x40) IX[b]
	[27] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[b]
	[28] -1	0	0x0000c400 - 0x0000c47f (0x80) IX[b]
	[29] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xfdb00000 - 0xfdb000ff (0x100) MX[b]
	[5] -1	0	0xfdc00000 - 0xfdc03fff (0x4000) MX[b]
	[6] -1	0	0xfdd00000 - 0xfdd007ff (0x800) MX[b]
	[7] -1	0	0xfdf00000 - 0xfdf03fff (0x4000) MX[b]
	[8] -1	0	0xfda00000 - 0xfda007ff (0x800) MX[b]
	[9] -1	0	0xfd700000 - 0xfd7007ff (0x800) MX[b]
	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[11] -1	0	0xfce00000 - 0xfce0ffff (0x10000) MX[b](B)
	[12] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[13] -1	0	0xfcf00000 - 0xfcf1ffff (0x20000) MX[b](B)
	[14] -1	0	0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
	[15] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[18] -1	0	0x00001400 - 0x000014ff (0x100) IX[b]
	[19] -1	0	0x00001000 - 0x000010ff (0x100) IX[b]
	[20] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[b]
	[21] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[22] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[b]
	[23] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[24] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[25] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[26] -1	0	0x0000d000 - 0x0000d00f (0x10) IX[b]
	[27] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[b]
	[28] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[b]
	[29] -1	0	0x0000e000 - 0x0000e003 (0x4) IX[b]
	[30] -1	0	0x0000e400 - 0x0000e407 (0x8) IX[b]
	[31] -1	0	0x0000b800 - 0x0000b807 (0x8) IX[b]
	[32] -1	0	0x0000b400 - 0x0000b43f (0x40) IX[b]
	[33] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[b]
	[34] -1	0	0x0000c400 - 0x0000c47f (0x80) IX[b]
	[35] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.1.1, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 6.6.2
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
(II) ATI: ATI driver (version 6.6.2) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
	ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
	ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
	ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
	ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
	ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
	ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
	ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
	ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
	ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
	ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI:  Candidate "Device" section "Generic Video Card".
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI Radeon X800PRO (R420) JI (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xfdb00000 - 0xfdb000ff (0x100) MX[b]
	[5] -1	0	0xfdc00000 - 0xfdc03fff (0x4000) MX[b]
	[6] -1	0	0xfdd00000 - 0xfdd007ff (0x800) MX[b]
	[7] -1	0	0xfdf00000 - 0xfdf03fff (0x4000) MX[b]
	[8] -1	0	0xfda00000 - 0xfda007ff (0x800) MX[b]
	[9] -1	0	0xfd700000 - 0xfd7007ff (0x800) MX[b]
	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[11] -1	0	0xfce00000 - 0xfce0ffff (0x10000) MX[b](B)
	[12] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[13] -1	0	0xfcf00000 - 0xfcf1ffff (0x20000) MX[b](B)
	[14] -1	0	0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
	[15] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[18] -1	0	0x00001400 - 0x000014ff (0x100) IX[b]
	[19] -1	0	0x00001000 - 0x000010ff (0x100) IX[b]
	[20] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[b]
	[21] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[22] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[b]
	[23] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[24] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[25] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[26] -1	0	0x0000d000 - 0x0000d00f (0x10) IX[b]
	[27] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[b]
	[28] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[b]
	[29] -1	0	0x0000e000 - 0x0000e003 (0x4) IX[b]
	[30] -1	0	0x0000e400 - 0x0000e407 (0x8) IX[b]
	[31] -1	0	0x0000b800 - 0x0000b807 (0x8) IX[b]
	[32] -1	0	0x0000b400 - 0x0000b43f (0x40) IX[b]
	[33] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[b]
	[34] -1	0	0x0000c400 - 0x0000c47f (0x80) IX[b]
	[35] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 4.2.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xfdb00000 - 0xfdb000ff (0x100) MX[b]
	[5] -1	0	0xfdc00000 - 0xfdc03fff (0x4000) MX[b]
	[6] -1	0	0xfdd00000 - 0xfdd007ff (0x800) MX[b]
	[7] -1	0	0xfdf00000 - 0xfdf03fff (0x4000) MX[b]
	[8] -1	0	0xfda00000 - 0xfda007ff (0x800) MX[b]
	[9] -1	0	0xfd700000 - 0xfd7007ff (0x800) MX[b]
	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[11] -1	0	0xfce00000 - 0xfce0ffff (0x10000) MX[b](B)
	[12] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[13] -1	0	0xfcf00000 - 0xfcf1ffff (0x20000) MX[b](B)
	[14] -1	0	0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
	[15] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[21] -1	0	0x00001400 - 0x000014ff (0x100) IX[b]
	[22] -1	0	0x00001000 - 0x000010ff (0x100) IX[b]
	[23] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[b]
	[24] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[25] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[b]
	[26] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[27] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[28] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[29] -1	0	0x0000d000 - 0x0000d00f (0x10) IX[b]
	[30] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[b]
	[31] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[b]
	[32] -1	0	0x0000e000 - 0x0000e003 (0x4) IX[b]
	[33] -1	0	0x0000e400 - 0x0000e407 (0x8) IX[b]
	[34] -1	0	0x0000b800 - 0x0000b807 (0x8) IX[b]
	[35] -1	0	0x0000b400 - 0x0000b43f (0x40) IX[b]
	[36] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[b]
	[37] -1	0	0x0000c400 - 0x0000c47f (0x80) IX[b]
	[38] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xfd000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon X800PRO (R420) JI (AGP)" (ChipID = 0x4a49)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): BIOS at 0xfcf00000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.2.0 and kernel module version 1.25.0
(II) RADEON(0): AGP Fast Write disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (256 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules/libi2c.so
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): Port0: DDCType-2, DACType-0, TMDSType--1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-1, DACType-1, TMDSType-0, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 1, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 1
(II) RADEON(0): EDID data from the display on port 2-----------------------
(II) RADEON(0): Manufacturer: CPQ  Model: 145b  Serial#: 808464689
(II) RADEON(0): Year: 2003  Week: 34
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.637 redY: 0.344   greenX: 0.310 greenY: 0.582
(II) RADEON(0): blueX: 0.143 blueY: 0.100   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56  V max: 76 Hz, H min: 30  H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: COMPAQ FP7317
(II) RADEON(0): Serial No: THT3340011
(II) RADEON(0): 
(II) RADEON(0): Primary:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- DVI_DDC
(II) RADEON(0): Secondary:
 Monitor   -- NONE
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- MONID
(II) RADEON(0): ref_freq: 2700, min_pll: 20000, max_pll: 50000, xclk: 40000, sclk: 475.000000, mclk: 450.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=3 min=20000 max=50000; xclk=40000
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(WW) RADEON(0): config file hsync range 28-51kHz not within DDC hsync ranges.
(WW) RADEON(0): config file vrefresh range 43-60Hz not within DDC vrefresh ranges.
(II) RADEON(0): Generic Monitor: Using hsync range of 28.00-51.00 kHz
(II) RADEON(0): Generic Monitor: Using vrefresh range of 43.00-60.00 Hz
(II) RADEON(0): Clock range:  20.00 to 500.00 MHz
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Generic Monitor) mode clock 148.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Generic Monitor) mode clock 157.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Generic Monitor) mode clock 162MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Generic Monitor) mode clock 175.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Generic Monitor) mode clock 189MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Generic Monitor) mode clock 202.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Generic Monitor) mode clock 229.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Generic Monitor) mode clock 204.8MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Generic Monitor) mode clock 261MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Generic Monitor) mode clock 218.3MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Generic Monitor) mode clock 288MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Generic Monitor) mode clock 234MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Generic Monitor) mode clock 297MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "832x624" (vrefresh out of range)
(II) RADEON(0): Not using default mode "416x312" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Generic Monitor) mode clock 151MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Generic Monitor) mode clock 155.8MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Generic Monitor) mode clock 184MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1440x900" (hsync out of range)
(II) RADEON(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(WW) (1680x1050,Generic Monitor) mode clock 147.14MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(WW) (1920x1200,Generic Monitor) mode clock 193.16MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(WW) (1920x1200,Generic Monitor) mode clock 230MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Generic Monitor) mode clock 341.35MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Generic Monitor) mode clock 266.95MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Generic Monitor) mode clock 340.48MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Generic Monitor) mode clock 388.04MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x800" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x768" (width too large for virtual size)
(--) RADEON(0): Virtual size is 1024x768 (pitch 1024)
(**) RADEON(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) RADEON(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) RADEON(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) RADEON(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(--) RADEON(0): Display dimensions: (330, 270) mm
(--) RADEON(0): DPI set to (78, 72)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xfd000000 - 0xfd00ffff (0x10000) MX[b]
	[1] 0	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[6] -1	0	0xfdb00000 - 0xfdb000ff (0x100) MX[b]
	[7] -1	0	0xfdc00000 - 0xfdc03fff (0x4000) MX[b]
	[8] -1	0	0xfdd00000 - 0xfdd007ff (0x800) MX[b]
	[9] -1	0	0xfdf00000 - 0xfdf03fff (0x4000) MX[b]
	[10] -1	0	0xfda00000 - 0xfda007ff (0x800) MX[b]
	[11] -1	0	0xfd700000 - 0xfd7007ff (0x800) MX[b]
	[12] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[13] -1	0	0xfce00000 - 0xfce0ffff (0x10000) MX[b](B)
	[14] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[15] -1	0	0xfcf00000 - 0xfcf1ffff (0x20000) MX[b](B)
	[16] -1	0	0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
	[17] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[18] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
	[19] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
	[20] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
	[21] 0	0	0x0000a000 - 0x0000a0ff (0x100) IX[b]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[24] -1	0	0x00001400 - 0x000014ff (0x100) IX[b]
	[25] -1	0	0x00001000 - 0x000010ff (0x100) IX[b]
	[26] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[b]
	[27] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[28] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[b]
	[29] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[30] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[31] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[32] -1	0	0x0000d000 - 0x0000d00f (0x10) IX[b]
	[33] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[b]
	[34] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[b]
	[35] -1	0	0x0000e000 - 0x0000e003 (0x4) IX[b]
	[36] -1	0	0x0000e400 - 0x0000e407 (0x8) IX[b]
	[37] -1	0	0x0000b800 - 0x0000b807 (0x8) IX[b]
	[38] -1	0	0x0000b400 - 0x0000b43f (0x40) IX[b]
	[39] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[b]
	[40] -1	0	0x0000c400 - 0x0000c47f (0x80) IX[b]
	[41] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
	[42] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
	[43] 0	0	0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(**) RADEON(0): RADEONScreenInit d0000000 0
(**) RADEON(0): Map: 0xd0000000, 0x08000000
(==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x81fded8)
(**) RADEON(0): Read: 0x000c0003 0x0006002b 0x00000000
(**) RADEON(0): Read: rd=3, fd=43, pd=6
(**) RADEON(0): RADEONSaveMode returns 0x81fded8
(==) RADEON(0): Using 24 bit depth buffer
(WW) RADEON(0): Enabling DRM support

	*** Direct rendering support is highly experimental for Radeon 9500
	*** and newer cards. The 3d mesa driver is not provided in this tree.
	*** A very experimental (and incomplete) version is available from Mesa CVS.
	*** Additional information can be found on http://r300.sourceforge.net
	*** This message has been last modified on 2005-08-07.

drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf8f3d000
(II) RADEON(0): [drm] mapped SAREA 0xf8f3d000 to 0xb7b22000
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000a09 [AGP 0x1106/0x3188; Card 0x1002/0x4a49]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf8fd000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xaf8fc000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf6fc000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaf21c000
(II) RADEON(0): [drm] register handle = 0xfd000000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() : 
(**) RADEON(0):   mem_size         : 0x10000000
(**) RADEON(0):   MC_FB_LOCATION   : 0xdfffd000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1024x768       65.00  1024 1048 1184 1344   768  771  777  806 (24,32) -H -V
1024x768       65.00  1024 1048 1184 1344   768  771  777  806 (24,32) -H -V
(**) RADEON(0): Pitch = 8388736 bytes (virtualX = 1024, displayWidth = 1024)
(**) RADEON(0): dc=6500, of=26000, fd=29, pd=4
(**) RADEON(0): RADEONInit returns 0x81fe888
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81fe888)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0xdfffd000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x00000003 0x0002001d 0x00000000 (0x0000bf00)
(**) RADEON(0): Wrote: rd=3, fd=29, pd=2
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Will use back buffer at offset 0xc00000
(II) RADEON(0): Will use depth buffer at offset 0xf00000
(II) RADEON(0): Will use 112640 kb for textures at offset 0x1200000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 177
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xdfffd000 is: 0xdfffd000
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 128
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7417
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
    xkb_keycodes             { include "xfree86+aliases(qwerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+us+level3(ralt_switch)" };
    xkb_geometry             { include "pc(pc105)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!

J'ai pris ça dans le fichier /var/log/Xorg.0.log (je ne sait pas si c'est la qu'il fallait le prendre j'ai un peu improvisé ^^)

J'espère que certains d'entre vous saurons de quoi il s'agit :/

En attendant, j'ai remis le driver "vesa", puis une fois le serverX démarré, j'ai réinstaller fglrx...


Merci beaucoup à ceux qui prendrons le temps de m'aider !

#8 Le 20/03/2007, à 10:57

Scrat38

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Heuh Merci de votre participation mais je crois qu'on s'éloigne un peu de la préoccupation initiale de ce post...
A savoir, résoudre le problème du freeze de beryl au lancement !!!
Je n'ais toujours pas trouvé la solution, et attends désespérément (peut-etre pas quand même) votre aide !

Merci !

Les ordinateurs modernes se situent quelque part entre l'obsolescence et le néant... Ouais il doit avoir raison...

Hors ligne

#9 Le 20/03/2007, à 14:48

4t0m!k

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Arf, désolé c'est vrai que je demande plus d'aide que j'en apporte et ce, sur un topic de quelqu'un d'autre ça se fait pas dsl !

Vait soit refaire un topic, soit essayer de me debrouiller tout seul ....

Bonne chance avec ton problème ! (ta deja de la chance que le serveur X se lance avec les pilotes libres :p)

#10 Le 23/03/2007, à 21:48

Scrat38

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Vraiment personne ???
...

Les ordinateurs modernes se situent quelque part entre l'obsolescence et le néant... Ouais il doit avoir raison...

Hors ligne

#11 Le 04/04/2007, à 22:23

psycho.pat

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

salut scrat,

j'ai la meme configuration que toi (radeon x800 + beryl + aiglx) mais pas le problème du freeze.

essaie avec le minimum d'options pour la section device, et remt les une par une si tu veux les tester.

Section "Device"

  Identifier "ATI Technologies, Inc. R430 UM [Radeon X800 XL] (PCIe)"
#  Boardname "radeon"
  BusID "PCI:2:0:0"
  Driver "radeon"
#  Option "DRI" "true"
#  Option "XAANoOffscreenPixmaps" "true"
#  Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
#  Option "AccelDFS"    "1" # mettez à 0 si vous avez une carte AGP
#  Option "GARTSize" "64"
#  Option "RingSize" "8"
#  Option "BufferSize" "2"
#  Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
# Option "ColorTiling" "1"
#  Option "EnableDepthMoves" "yes"
#  Option "UseFBDev" "false"
#  Option "RenderAccel" "true" # Enable the hardware render acceleration
#  Option "mtrr" "on"
#  Option  "SubPixelOrder" "none"
# Option "DPMS"
#  Option "DynamicClocks" "on"
EndSection

Hors ligne

#12 Le 06/04/2007, à 10:41

Scrat38

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Je commencais à desesperer...
Merci pour ta réponse psycho.pat, je m'en vais essayer cela dès ce soir...

Les ordinateurs modernes se situent quelque part entre l'obsolescence et le néant... Ouais il doit avoir raison...

Hors ligne

#13 Le 06/04/2007, à 11:13

Scrat38

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Au fait pourrais tu me montrer ton xorg stp, tout marche chez toi ??? Si oui quel tuto as-tu suivi ???

Les ordinateurs modernes se situent quelque part entre l'obsolescence et le néant... Ouais il doit avoir raison...

Hors ligne

#14 Le 07/04/2007, à 11:43

psycho.pat

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

pour les tutos, j'ai suivi celui de la documentation du site:
http://doc.ubuntu-fr.org/beryl
avec navigation sur les liens annexes  de la section cartes ati
pour le xorg, je te l'enverrai lundi soir.

Hors ligne

#15 Le 28/04/2007, à 13:01

Bozo

Re : Beryl + carte vidéo ATI X800 (dsl...) + driver "radeon"... Encore !!!

Salut

Pour ton problème avec beryl, lorsque j'ai fait l'update de edgy à feisty, j'avais presque le même problème

beryl: Failed to manage screen: 0
beryl: No manageable screens found on display :0.0

Pour moi, j'ai du downgrader beryl à la version 0.2.0 et maintenant tout marche nickel, je crois qu'il y a un bug avec beryl et feisty. Il devrait être fixé à la prochaine upgrade.

Pages : 1