Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 17/04/2007, à 10:42

Gnark

Apres un redemarrage mon ecran en 800*600

Bonjour,

Je suis sous Ubuntu 6.10, ma carte graphique est une GForce 6200 et j'ai les drivers nvidia-glx d'installés.
Jusqu'a présent tout etait configuré correctement mais au redemerrage de ce matin ma résoltuion reste en 800*600 et pas moyen de la faire changer. J'ai essayé de réinstaller les drivers nvidia, d'effectué un dpkg-reconfigure xserver-xorg mais rien a faire ca reste en 800*600

Mon xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Oct 16 22:13:07 PDT 2006

# /etc/X11/xdpkg-reconfigure xserver-xorg
org.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "RIDQ"
    HorizSync       30.0 - 70.0
    VertRefresh     50.0 - 160.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV40? [GF6200]"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV40? [GF6200]"
    Monitor        "RIDQ"
    DefaultDepth    24
    SubSection     "Display"
        Depth       1
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

A noté que :

Section "Monitor"
    Identifier     "RIDQ"
    HorizSync       30.0 - 70.0
    VertRefresh     50.0 - 160.0
    Option         "DPMS"
EndSection

etait dans les backups (avant que je fasse le dpkg-reconfigure) comme ceci :

Section "Monitor"
    Identifier    "SONY HMD-A20"
    Option        "DPMS"
    HorizSync    30-70
    VertRefresh    48-120
EndSection

Pourquoi il a changé d'indentifiant ???

bien sur je n'ai rien changé au hardware de mon PC ni mon ecran

Merci de votre aide

Hors ligne

#2 Le 17/04/2007, à 17:18

Gnark

Re : Apres un redemarrage mon ecran en 800*600

Voila ce que j'ai dans les logs si ca peut aider :

(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 at PCI:1:0:0
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.10.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0):     RBA RIDQ (CRT-0)
(--) NVIDIA(0): RBA RIDQ (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1280x1024"; removing.
(WW) NVIDIA(0): No valid modes for "1024x768"; removing.
(WW) NVIDIA(0): No valid modes for "800x600"; removing.
(WW) NVIDIA(0): No valid modes for "640x480"; removing.
(WW) NVIDIA(0): 
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0):     "nvidia-auto-select".
(WW) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 800 x 600
(WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
(WW) NVIDIA(0):     DPI from EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xdd000000 - 0xddffffff (0x1000000) MX[b]
	[1] 0	0	0xe0000000 - 0xefffffff (0x10000000) MX[b]
	[2] 0	0	0xde000000 - 0xdeffffff (0x1000000) MX[b]
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[7] -1	0	0xda000000 - 0xda0000ff (0x100) MX[b]
	[8] -1	0	0xda800000 - 0xda8000ff (0x100) MX[b]
	[9] -1	0	0xdb000000 - 0xdb0000ff (0x100) MX[b]
	[10] -1	0	0xdb800000 - 0xdb800fff (0x1000) MX[b]
	[11] -1	0	0xdc000000 - 0xdc000fff (0x1000) MX[b]
	[12] -1	0	0xdc800000 - 0xdc803fff (0x4000) MX[b]
	[13] -1	0	0xf0000000 - 0xefffffff (0x0) MX[b]O
	[14] -1	0	0xdffe0000 - 0xdfffffff (0x20000) MX[b](B)
	[15] -1	0	0xdd000000 - 0xddffffff (0x1000000) MX[b](B)
	[16] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
	[17] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
	[18] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
	[19] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
	[20] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
	[21] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[22] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[23] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[b]
	[24] -1	0	0x0000a800 - 0x0000a8ff (0x100) IX[b]
	[25] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[b]
	[26] -1	0	0x0000b400 - 0x0000b40f (0x10) IX[b]
	[27] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[28] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[b]
	[29] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[b]
	[30] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[b]
	[31] -1	0	0x00009000 - 0x0000901f (0x20) IX[b]
	[32] -1	0	0x00009400 - 0x0000941f (0x20) IX[b]
	[33] -1	0	0x00009800 - 0x0000980f (0x10) IX[b]
	[34] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
	[35] 0	0	0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture

Merci de votre aide smile

Hors ligne

#3 Le 17/04/2007, à 22:49

AudioGarf

Re : Apres un redemarrage mon ecran en 800*600

UP!

Même problème zarbi:
J'ouvre le boitier pour passer un coup de souflette et au demarrage, la session graphique est en 800x600...
Pourtant en mode texte c'est bien du 1024 que j'ai...

Rien ne semble avoir bougé dans le /etc/xorg.conf, je n'ai pas encore fait de reconfigure. On va voir.

Hors ligne

Pages : 1