#1 Le 26/11/2012, à 18:21
- liliputinchen
[Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Bonjour,
J'ai le version 12.04 LTS, en dual-boot avec Windows 7, sur un HP Probook 4535s, le tout fonctionnant bien jusqu'à la semaine dernière.
Le gestionnaire de mises à jour m'a alors proposé un certain nombre de mises à jour, dont l'installation d'un nouveau noyau linux 3.5.0-13-generic. Toute l'installation s'est bien passée.
Mais au redémarrage, gros problème :
- il n'y a plus de curseur visible
- l'interface Unity n'est pas visible
- pas de connexion internet
- les fenêtres des applications sont décalées vers la gauche et en haut.
En redémarrant manuellement sur l'ancien noyau linux 3.2.0-30-generic, tout fonctionne par contre correctement.
Que dois je faire ? Est-ce qu'il est possible d'enlever le nouveau noyau ? Car si je n'interviens pas manuellement, ça démarre toujours sur le 3.5.0-13, avec les mêmes problèmes.
Ou comment résoudre les problèmes mentionnés avec le nouveau noyau ?
Merci pour toutes vos suggestions.
Dernière modification par liliputinchen (Le 30/11/2012, à 23:05)
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#2 Le 26/11/2012, à 21:18
- f.x0
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Bonjour liliputinchen,
Tu peux essayer ceci :
démarres en choisissant le noyau 3.2.0-30-generic
ouvres un terminal
tapes
dpkg -l | cut -f 3 -d " " | grep linux-
et postes le retour de cette commande
SOPI
Hors ligne
#3 Le 27/11/2012, à 10:38
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Bonjour f.x0
La commande
dpkg -l | cut -f 3 -d " " | grep linux-
donne :
linux-firmware
linux-generic
linux-headers-3.2.0-30
linux-headers-3.2.0-30-generic
linux-headers-3.2.0-31
linux-headers-3.2.0-31-generic
linux-headers-3.2.0-32
linux-headers-3.2.0-32-generic
linux-headers-3.2.0-33
linux-headers-3.2.0-33-generic
linux-headers-3.2.0-34
linux-headers-3.2.0-34-generic
linux-headers-generic
linux-image-3.2.0-29-generic
linux-image-3.2.0-30-generic
linux-image-3.2.0-31-generic
linux-image-3.2.0-32-generic
linux-image-3.2.0-33-generic
linux-image-3.2.0-34-generic
linux-image-generic
linux-libc-dev
linux-sound-base
syslinux-common
syslinux-legacy
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#4 Le 27/11/2012, à 19:08
- f.x0
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Le noyau 3.5.0-13 ne risque pas de fonctionner, il n'a pas l'air d'être installé (voir liste sur ton précédent post).
Postes le retour de
ls /boot
et de
cat /boot/grub/grub.cfg
SOPI
Hors ligne
#5 Le 27/11/2012, à 19:37
- loubrix
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
et en plus, je ne vois pas de noyau en 3.5 dans les dépots 12.04, que des 3.2; n'aurais-tu pas activé un dépots tiers contenant des noyaux ?
Asus X50VL - Ubuntu 12.04 AMD64
HP G62 - Ubuntu 12.10 AMD64
Fujitsu-Siemens Amilo EL - Lubuntu 12.04 i686
Manjaro, une rolling pour débutants
Hors ligne
#6 Le 27/11/2012, à 19:37
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Voici les résultats :
ls /boot abi-2.6.32-33-generic initrd.img-3.2.0-33-generic abi-2.6.32-42-generic initrd.img-3.2.0-34-generic abi-3.2.0-29-generic initrd.img-3.5.0-13-generic abi-3.2.0-29-generic-pae memtest86+.bin abi-3.2.0-30-generic memtest86+_multiboot.bin abi-3.2.0-31-generic System.map-2.6.32-33-generic abi-3.2.0-32-generic System.map-2.6.32-42-generic abi-3.2.0-33-generic System.map-3.2.0-29-generic abi-3.2.0-34-generic System.map-3.2.0-29-generic-pae abi-3.5.0-13-generic System.map-3.2.0-30-generic config-2.6.32-33-generic System.map-3.2.0-31-generic config-2.6.32-42-generic System.map-3.2.0-32-generic config-3.2.0-29-generic System.map-3.2.0-33-generic config-3.2.0-29-generic-pae System.map-3.2.0-34-generic config-3.2.0-30-generic System.map-3.5.0-13-generic config-3.2.0-31-generic vmcoreinfo-2.6.32-33-generic config-3.2.0-32-generic vmcoreinfo-2.6.32-42-generic config-3.2.0-33-generic vmlinuz-2.6.32-42-generic config-3.2.0-34-generic vmlinuz-3.2.0-29-generic config-3.5.0-13-generic vmlinuz-3.2.0-29-generic-pae grub vmlinuz-3.2.0-30-generic initrd.img-2.6.32-42-generic vmlinuz-3.2.0-31-generic initrd.img-3.2.0-29-generic vmlinuz-3.2.0-32-generic initrd.img-3.2.0-29-generic-pae vmlinuz-3.2.0-33-generic initrd.img-3.2.0-30-generic vmlinuz-3.2.0-34-generic initrd.img-3.2.0-31-generic vmlinuz-3.5.0-13-generic initrd.img-3.2.0-32-generic
et
cat /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.5.0-13-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.5.0-13-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.5.0-13-generic
}
menuentry 'Ubuntu, avec Linux 3.5.0-13-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.5.0-13-generic ...'
linux /boot/vmlinuz-3.5.0-13-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.5.0-13-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.2.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-34-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-34-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-34-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-34-generic ...'
linux /boot/vmlinuz-3.2.0-34-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-34-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-33-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-33-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-33-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-33-generic ...'
linux /boot/vmlinuz-3.2.0-33-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-32-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-32-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-32-generic ...'
linux /boot/vmlinuz-3.2.0-32-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-31-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-31-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-31-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-31-generic ...'
linux /boot/vmlinuz-3.2.0-31-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-31-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-30-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-30-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-30-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-30-generic ...'
linux /boot/vmlinuz-3.2.0-30-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-30-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-29-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
menuentry 'Ubuntu, avec Linux 3.2.0-29-generic-pae (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-29-generic-pae ...'
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
menuentry 'Ubuntu, avec Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-29-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-42-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-2.6.32-42-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-2.6.32-42-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-42-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 2.6.32-42-generic ...'
linux /boot/vmlinuz-2.6.32-42-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-42-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_linux_proxy ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry "Ubuntu, avec Linux 3.2.0-30-generic" --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-30-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-30-generic
}
menuentry "Ubuntu, avec Linux 3.2.0-30-generic (mode de dépannage)" --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-30-generic ...'
linux /boot/vmlinuz-3.2.0-30-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-30-generic
}
menuentry "Ubuntu, avec Linux 3.2.0-29-generic" --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry "Ubuntu, avec Linux 3.2.0-29-generic (mode de dépannage)" --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
echo 'Chargement de Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=e4b09e7d-c055-4a23-83db-ac8d69b232c3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
### END /etc/grub.d/10_linux_proxy ###
### BEGIN /etc/grub.d/11_linux_xen ###
### END /etc/grub.d/11_linux_xen ###
### BEGIN /etc/grub.d/12_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root e4b09e7d-c055-4a23-83db-ac8d69b232c3
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/12_memtest86+ ###
### BEGIN /etc/grub.d/13_os-prober_proxy ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 58AE806DAE80460A
chainloader +1
}
### END /etc/grub.d/13_os-prober_proxy ###
### BEGIN /etc/grub.d/14_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/14_custom ###
### BEGIN /etc/grub.d/15_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/15_custom ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
Est-ce que ça peut expliquer mes problèmes ?
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#7 Le 27/11/2012, à 19:40
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
et en plus, je ne vois pas de noyau en 3.5 dans les dépots 12.04, que des 3.2; n'aurais-tu pas activé un dépots tiers contenant des noyaux ?
pas à ma connaissance, ou alors involontairement
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#8 Le 27/11/2012, à 19:51
- loubrix
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
alors poste aussi le retour de
cat /etc/apt/sources.list
et
ls /etc/apt/sources.list.d/
NB: ce qui est bizarre, c'est que ce noyau est inconnu du gestionnaire de paquets, mais que d'après le contenu de /boot, il semble installé...
par contre, tu as des noyaux d'une précédente version d'Ubuntu; il faudrait faire du ménage...
tant qu'on y est, poste le retour de:
df -h
(petit pressentiment)
Dernière modification par loubrix (Le 27/11/2012, à 19:52)
Asus X50VL - Ubuntu 12.04 AMD64
HP G62 - Ubuntu 12.10 AMD64
Fujitsu-Siemens Amilo EL - Lubuntu 12.04 i686
Manjaro, une rolling pour débutants
Hors ligne
#9 Le 27/11/2012, à 19:54
- f.x0
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Redémarres ton PC
CHOISIS DE DÉMARRER SUR LE NOYAU linux-headers-3.2.0-34
Esaies ceci
sudo rm -f /boot/abi-3.5.0-13-generic
sudo rm -f /boot/initrd.img-3.5.0-13-generic
sudo rm -f /boot/System.map-3.5.0-13-generic
sudo rm -f /boot/vmlinuz-3.5.0-13-generic
puis tapes
sudo update-grub
redémarres ton PC sans rien toucher.
Cela fonctionne ???
poste le retour de
uname -a
Dernière modification par f.x0 (Le 27/11/2012, à 19:55)
SOPI
Hors ligne
#10 Le 28/11/2012, à 10:10
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
alors poste aussi le retour de
cat /etc/apt/sources.list
et
ls /etc/apt/sources.list.d/
NB: ce qui est bizarre, c'est que ce noyau est inconnu du gestionnaire de paquets, mais que d'après le contenu de /boot, il semble installé...
par contre, tu as des noyaux d'une précédente version d'Ubuntu; il faudrait faire du ménage...
tant qu'on y est, poste le retour de:df -h
(petit pressentiment)
voilà les résultats :
cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120823.1)]/ dists/precise/main/binary-i386/
# deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120823.1)]/ dists/precise/restricted/binary-i386/
# deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120823.1)]/ precise main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ precise main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ precise-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ precise universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise universe
deb http://fr.archive.ubuntu.com/ubuntu/ precise-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ precise multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ precise-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu precise-security main restricted
deb-src http://security.ubuntu.com/ubuntu precise-security main restricted
deb http://security.ubuntu.com/ubuntu precise-security universe
deb-src http://security.ubuntu.com/ubuntu precise-security universe
deb http://security.ubuntu.com/ubuntu precise-security multiverse
deb-src http://security.ubuntu.com/ubuntu precise-security multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu precise partner
# deb-src http://archive.canonical.com/ubuntu precise partner
## This software is not part of Ubuntu, but is offered by third-party
## developers who want to ship their latest software.
deb http://extras.ubuntu.com/ubuntu precise main
deb-src http://extras.ubuntu.com/ubuntu precise main
deb http://fr.archive.ubuntu.com/ubuntu/ precise-proposed restricted main multiverse universe
ls /etc/apt/sources.list.d/
blca-ppa-precise.list
blca-ppa-precise.list.save
danielrichter2007-grub-customizer-precise.list
danielrichter2007-grub-customizer-precise.list.save
google-earth.list
google-earth.list.save
tiheum-equinox-precise.list
tiheum-equinox-precise.list.save
df -h
Sys. fich. Taille Util. Dispo Uti% Monté sur
/dev/sda5 513G 36G 452G 8% /
udev 1,7G 4,0K 1,7G 1% /dev
tmpfs 684M 988K 683M 1% /run
none 5,0M 0 5,0M 0% /run/lock
none 1,7G 352K 1,7G 1% /run/shm
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#11 Le 28/11/2012, à 10:13
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Redémarres ton PC
CHOISIS DE DÉMARRER SUR LE NOYAU linux-headers-3.2.0-34
Comment faire si ce noyau n'apparaît pas dans le GRUB ?
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#12 Le 28/11/2012, à 12:42
- alca94
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Comment faire si ce noyau n'apparaît pas dans le GRUB ?
Il me semble qu'en démarrant en mode dépannage on puisse choisir quel noyau dans "Linux Previous"
POUR METTRE LES RETOURS DU "TERMINAL" voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641
Hors ligne
#13 Le 28/11/2012, à 13:07
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Redémarres ton PC
CHOISIS DE DÉMARRER SUR LE NOYAU linux-headers-3.2.0-34Esaies ceci
sudo rm -f /boot/abi-3.5.0-13-generic sudo rm -f /boot/initrd.img-3.5.0-13-generic sudo rm -f /boot/System.map-3.5.0-13-generic sudo rm -f /boot/vmlinuz-3.5.0-13-generic
puis tapes
sudo update-grub
redémarres ton PC sans rien toucher.
Cela fonctionne ???
poste le retour de
uname -a
ça y est, à l'aide de Grub Customizer, j'ai fait apparaître le noyau linux-headers-3.2.0-34 dans la liste de démarrage.
Les commandes proposées donnent alors les résultats suivants :
ralf@ralf-HP-ProBook-4535s:~$ sudo rm -f /boot/abi-3.5.0-13-generic
[sudo] password for ralf:
ralf@ralf-HP-ProBook-4535s:~$ sudo rm -f /boot/initrd.img-3.5.0-13-generic
ralf@ralf-HP-ProBook-4535s:~$ sudo rm -f /boot/System.map-3.5.0-13-generic
ralf@ralf-HP-ProBook-4535s:~$ sudo rm -f /boot/vmlinuz-3.5.0-13-generic
ralf@ralf-HP-ProBook-4535s:~$ sudo update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.2.0-34-generic
Found initrd image: /boot/initrd.img-3.2.0-34-generic
Found linux image: /boot/vmlinuz-3.2.0-33-generic
Found initrd image: /boot/initrd.img-3.2.0-33-generic
Found linux image: /boot/vmlinuz-3.2.0-32-generic
Found initrd image: /boot/initrd.img-3.2.0-32-generic
Found linux image: /boot/vmlinuz-3.2.0-31-generic
Found initrd image: /boot/initrd.img-3.2.0-31-generic
Found linux image: /boot/vmlinuz-3.2.0-30-generic
Found initrd image: /boot/initrd.img-3.2.0-30-generic
Found linux image: /boot/vmlinuz-3.2.0-29-generic-pae
Found initrd image: /boot/initrd.img-3.2.0-29-generic-pae
Found linux image: /boot/vmlinuz-3.2.0-29-generic
Found initrd image: /boot/initrd.img-3.2.0-29-generic
Found linux image: /boot/vmlinuz-2.6.32-42-generic
Found initrd image: /boot/initrd.img-2.6.32-42-generic
Found linux image: /boot/vmlinuz-3.2.0-34-generic
Found initrd image: /boot/initrd.img-3.2.0-34-generic
Found linux image: /boot/vmlinuz-3.2.0-33-generic
Found initrd image: /boot/initrd.img-3.2.0-33-generic
Found linux image: /boot/vmlinuz-3.2.0-32-generic
Found initrd image: /boot/initrd.img-3.2.0-32-generic
Found linux image: /boot/vmlinuz-3.2.0-31-generic
Found initrd image: /boot/initrd.img-3.2.0-31-generic
Found linux image: /boot/vmlinuz-3.2.0-30-generic
Found initrd image: /boot/initrd.img-3.2.0-30-generic
Found linux image: /boot/vmlinuz-3.2.0-29-generic-pae
Found initrd image: /boot/initrd.img-3.2.0-29-generic-pae
Found linux image: /boot/vmlinuz-3.2.0-29-generic
Found initrd image: /boot/initrd.img-3.2.0-29-generic
Found linux image: /boot/vmlinuz-2.6.32-42-generic
Found initrd image: /boot/initrd.img-2.6.32-42-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sda1
Found Windows 7 (loader) on /dev/sda2
Found Windows Vista (loader) on /dev/sda3
done
Je vais redémarrer et je donnerai alors le résultat
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#14 Le 28/11/2012, à 13:29
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Redémarres ton PC
CHOISIS DE DÉMARRER SUR LE NOYAU linux-headers-3.2.0-34Esaies ceci
sudo rm -f /boot/abi-3.5.0-13-generic sudo rm -f /boot/initrd.img-3.5.0-13-generic sudo rm -f /boot/System.map-3.5.0-13-generic sudo rm -f /boot/vmlinuz-3.5.0-13-generic
puis tapes
sudo update-grub
redémarres ton PC sans rien toucher.
Cela fonctionne ???
poste le retour de
uname -a
ça fonctionne, mais au redémarrage, le GRUB se présente avec en première ligne :
Previous Linux versions
puis une liste des divers noyaux, en commençant par :
Ubuntu, avec Linux 3.2.0.34-generic
etc
.
.
.
en ne faisant rien, Ubuntu démarre finalement correctement, mais après un temps d'attente assez long !
La commande
uname -a
donne :
Linux ralf-HP-ProBook-4535s 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Donc, j'ai bien démarré sur le noyau 3.2.0-34-generic.
Par conséquent, il faudrait peut être que j'enlève le noyau 3.5.0-13, et que je supprime les vieux noyaux ? Mais pour ne pas faire de bêtises, comment dois je procéder ?
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#15 Le 28/11/2012, à 20:47
- f.x0
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Je pense que le noyau 3.5.0-13 est entièrement enlevé.
tu peux toujours faire un
sudo apt-get update
sudo apt-get autoremove --purge
Pour en lever les autres noyaux (IL VAUT MIEUX GARDER LE 3.2.0-34 POUR DÉMARRER + LE 3.2.0-33 EN SECOURS)
tapes SUR UNE SEULE LIGNE
sudo apt-get purge linux-headers-3.2.0-30 linux-headers-3.2.0-30-generic linux-headers-3.2.0-31 linux-headers-3.2.0-31-generic linux-headers-3.2.0-32 linux-headers-3.2.0-32-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic linux-image-3.2.0-32-generic
puis refais
sudo apt-get update
sudo apt-get autoremove --purge
sudo update-grub
redémarres ton PC sans rien toucher.
Cela fonctionne ???
Dernière modification par f.x0 (Le 28/11/2012, à 20:48)
SOPI
Hors ligne
#16 Le 28/11/2012, à 21:41
- loubrix
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Je pense que le noyau 3.5.0-13 est entièrement enlevé.
pas si sûr
ls /lib/modules
Asus X50VL - Ubuntu 12.04 AMD64
HP G62 - Ubuntu 12.10 AMD64
Fujitsu-Siemens Amilo EL - Lubuntu 12.04 i686
Manjaro, une rolling pour débutants
Hors ligne
#17 Le 29/11/2012, à 10:56
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Je pense que le noyau 3.5.0-13 est entièrement enlevé.
tu peux toujours faire un
sudo apt-get update sudo apt-get autoremove --purge
Pour en lever les autres noyaux (IL VAUT MIEUX GARDER LE 3.2.0-34 POUR DÉMARRER + LE 3.2.0-33 EN SECOURS)
tapes SUR UNE SEULE LIGNEsudo apt-get purge linux-headers-3.2.0-30 linux-headers-3.2.0-30-generic linux-headers-3.2.0-31 linux-headers-3.2.0-31-generic linux-headers-3.2.0-32 linux-headers-3.2.0-32-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic linux-image-3.2.0-32-generic
puis refais
sudo apt-get update sudo apt-get autoremove --purge sudo update-grub
redémarres ton PC sans rien toucher.
Cela fonctionne ???
oui, ça fonctionne !
Mais la première ligne du GRUB est toujours
Previous Linux versions
et ensuite le temps de démarrage est vraiment très long
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#18 Le 29/11/2012, à 10:58
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
f.x0 a écrit :Je pense que le noyau 3.5.0-13 est entièrement enlevé.
pas si sûr
ls /lib/modules
si :
ls /lib/modules
3.2.0-33-generic 3.2.0-34-generic
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#19 Le 29/11/2012, à 14:03
- loubrix
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
donc là oui, c'est ok...
mais je m'interroge toujours sur la raison de la présence (incomplète) de ce noyau...
Asus X50VL - Ubuntu 12.04 AMD64
HP G62 - Ubuntu 12.10 AMD64
Fujitsu-Siemens Amilo EL - Lubuntu 12.04 i686
Manjaro, une rolling pour débutants
Hors ligne
#20 Le 29/11/2012, à 15:23
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
donc là oui, c'est ok...
mais je m'interroge toujours sur la raison de la présence (incomplète) de ce noyau...
Oui, moi aussi ! Pourtant, je suis certain qu'il m'a été proposé par le gestionnaire de mises à jour.
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#21 Le 29/11/2012, à 16:12
- loubrix
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
regarde dans Synaptic si tu le vois, et si oui, regarde de quel dépot il provient.
Asus X50VL - Ubuntu 12.04 AMD64
HP G62 - Ubuntu 12.10 AMD64
Fujitsu-Siemens Amilo EL - Lubuntu 12.04 i686
Manjaro, une rolling pour débutants
Hors ligne
#22 Le 29/11/2012, à 16:18
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Il y a quand-même autre chose qui m'étonne.
Quand je fais
sudo update-grub
j'ai le résultat suivant
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.2.0-34-generic
Found initrd image: /boot/initrd.img-3.2.0-34-generic
Found linux image: /boot/vmlinuz-3.2.0-33-generic
Found initrd image: /boot/initrd.img-3.2.0-33-generic
Found linux image: /boot/vmlinuz-3.2.0-29-generic-pae
Found initrd image: /boot/initrd.img-3.2.0-29-generic-pae
Found linux image: /boot/vmlinuz-2.6.32-42-generic
Found initrd image: /boot/initrd.img-2.6.32-42-generic
Found linux image: /boot/vmlinuz-3.2.0-34-generic
Found initrd image: /boot/initrd.img-3.2.0-34-generic
Found linux image: /boot/vmlinuz-3.2.0-33-generic
Found initrd image: /boot/initrd.img-3.2.0-33-generic
Found linux image: /boot/vmlinuz-3.2.0-29-generic-pae
Found initrd image: /boot/initrd.img-3.2.0-29-generic-pae
Found linux image: /boot/vmlinuz-2.6.32-42-generic
Found initrd image: /boot/initrd.img-2.6.32-42-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sda1
Found Windows 7 (loader) on /dev/sda2
Found Windows Vista (loader) on /dev/sda3
done
Il apparaissent ici deux noyaux qui ne devraient plus exister dans mon système :
3.2.0-29-generic-pae
2.6.32-42-generic
Est-ce que c'est normal ?
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#23 Le 29/11/2012, à 16:27
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
regarde dans Synaptic si tu le vois, et si oui, regarde de quel dépot il provient.
Non il n'apparaît pas dans Synaptic, seulement les versions 3.5.0-18 et -19.
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne
#24 Le 29/11/2012, à 19:10
- f.x0
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Il apparaissent ici deux noyaux qui ne devraient plus exister dans mon système :
3.2.0-29-generic-pae
2.6.32-42-generic
Est-ce que c'est normal ?
Ils viennent probablement de résidus d'installation incomplètes.
pour supprimer ces traces, repostes le retour de
ls /boot
SOPI
Hors ligne
#25 Le 29/11/2012, à 19:47
- liliputinchen
Re : [Résolu] Problèmes suite à mise à jour vers noyau 3.5.0-13-generic
Ils viennent probablement de résidus d'installation incomplètes.
pour supprimer ces traces, repostes le retour de
ls /boot
voilà
ls /boot
abi-2.6.32-33-generic initrd.img-3.2.0-34-generic
abi-2.6.32-42-generic memtest86+.bin
abi-3.2.0-29-generic-pae memtest86+_multiboot.bin
abi-3.2.0-33-generic System.map-2.6.32-33-generic
abi-3.2.0-34-generic System.map-2.6.32-42-generic
config-2.6.32-33-generic System.map-3.2.0-29-generic-pae
config-2.6.32-42-generic System.map-3.2.0-33-generic
config-3.2.0-29-generic-pae System.map-3.2.0-34-generic
config-3.2.0-33-generic vmcoreinfo-2.6.32-33-generic
config-3.2.0-34-generic vmcoreinfo-2.6.32-42-generic
config-3.5.0-13-generic vmlinuz-2.6.32-42-generic
grub vmlinuz-3.2.0-29-generic-pae
initrd.img-2.6.32-42-generic vmlinuz-3.2.0-33-generic
initrd.img-3.2.0-29-generic-pae vmlinuz-3.2.0-34-generic
initrd.img-3.2.0-33-generic
Ubuntu 14.04 LTS x64, en double boot avec Windows 7 (rarement utilisé), sur HP ProBook 4535s
Processeur AMD A6-3400M APU with Radeon(tm) HD Graphics × 4
Carte graphique Gallium 0.4 on AMD SUMO (DRM 2.43.0, LLVM 3.8.0)
Hors ligne