Ubuntu-fr

okram

freeze à l'arrêt du PC avec Feisty

Bonjour,

J'ai installé Feisty Fawn sur un Shuttle XPC avec une GeForce  6200 TurboCache et le pilote propriétaire. Absolument tout fonctionne nickel, sauf une chose: quand je demande à arrêter le PC la séquence se déroule normalement jusqu'au logo Ubuntu avec l'indicateur de progression en dessous. Une fois que c'est 'à zéro' l'écran clignote une fois très brièvement et je reste là avec mon logo... rien à faire pour éteindre hormis de mettre l'interrupteur du blox d'alim sur OFF.

Ca semble fonctionner avec le pilote 'nv' non propriétaire mais je perds la 3D...
[EDIT] Ca ne marche pas non plus, pas d'interface hormis un curseur sur fond blanc après le login... [EDIT]

A tout hasard voci une copie de mon xorg.conf:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "Device"
	Identifier	"nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)]"
	Driver		"nvidia"
	Busid		"PCI:1:0:0"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	Horizsync	28-64
	Vertrefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)]"
	Monitor		"Écran générique"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

En résumé... HELP !
Merci d'avance pour vos idées,

Okram

Dernière modification par okram (Le 22/04/2007, à 21:27)

okram

Re : freeze à l'arrêt du PC avec Feisty

Up quelqu'un ?