Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 24/04/2007, à 18:07

john06

probleme de resolution (xorg)

Bonjour a tous,
Voila j'ai beau lire des poste, esseyer de trouver une solution a mon probleme , mais impossible, rien ne marche, tous d'abort j'ai un ordinateur portable :

HP OmniBook xe4100 - C 1.2 GHz - 14.1" TFT
Ordinateur portable - Mémoire vive: 128 Mo - Disque dur: 20 Go - DVD-ROM

(caracteristique complete ici http://www.ciao.fr/HP_OmniBook_Xe4100__562063)

j'ai installer ubuntu 7.04 sans aucun souci tous a etais reconnue par deffaut sans probleme, la resolution etais donc de 1024 x 768, aprés quelque heur, j'ai reusie a installer ma clef usb wifi, un onglet me signale que 340 mise a jour son possible, je les effectue tous.. et au redemarage ma resolution est de 840*600, des lors impossible de la changer en 1024*768. l'ecrant est illisible, j'ai esseyer de reconfigurer l'ecrant (via la reconfiguration de xorg) , mais a chaque fois au redemarage il y a un soucy, les log me dise que l'ecrant n'a pas etais trouver :

voila mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
    FontPath    "/usr/share/fonts/X11/misc"
    FontPath    "/usr/share/fonts/X11/cyrillic"
    FontPath    "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath    "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath    "/usr/share/fonts/X11/Type1"
    FontPath    "/usr/share/fonts/X11/100dpi"
    FontPath    "/usr/share/fonts/X11/75dpi"
    # path to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load    "i2c"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr"
    Option        "XkbOptions"    "lv3:ralt_switch"
    Option        "XkbVariant"    "oss"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "ZAxisMapping"        "4 5"
    Option        "Emulate3Buttons"    "true"
EndSection

Section "InputDevice"
    Identifier    "Synaptics Touchpad"
    Driver        "synaptics"
    Option        "SendCoreEvents"    "true"
    Option        "Device"        "/dev/psaux"
    Option        "Protocol"        "auto-dev"
    Option        "HorizScrollDelta"    "0"
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "stylus"
    Option        "Device"    "/dev/wacom"    # Change to
                            # /dev/input/event
                            # for USB
    Option        "Type"        "stylus"
    Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "eraser"
    Option        "Device"    "/dev/wacom"    # Change to
                            # /dev/input/event
                            # for USB
    Option        "Type"        "eraser"
    Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "cursor"
    Option        "Device"    "/dev/wacom"    # Change to
                            # /dev/input/event
                            # for USB
    Option        "Type"        "cursor"
    Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "Device"
    Identifier    "Carte vidéo générique"
    Driver        "vesa"
    BusID        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "à‰cran générique"
    Option        "DPMS"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "Carte vidéo générique"
    Monitor        "à‰cran générique"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice     "stylus"    "SendCoreEvents"
    InputDevice     "cursor"    "SendCoreEvents"
    InputDevice     "eraser"    "SendCoreEvents"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "DRI"
    Mode    0666
EndSection

si qu'elqu'un a la solution pour m'aider ? et si vous avez besoin de plus de renseignement (note : je suis debutant, donc n'hesiter pas non plus a me dire comment vous donner les renseignement que vous voulez))

Merci par avance!