pilotes ATI Radeon 9200SE

pyrignis · Le 25/04/2007, à 20:39

Bonjours a tous,
je suis nouveau sous linux donc n'hésitez pas a me dire si je suis tout a fait a côté

J'ai installé feisty et j'ai la forte impression que la lenteur que je perçois vient de la carte graphique.
En lisant d'autres postes je suis tombé sur des bench faites avec "glxgears"......on fait comment pour voir quel score on fait? (gros noob inside)

ensuite j'ai d'abord essayé d'installer les pilotes propriétaires avec synaptic......et après le serveur X ne voulait pas démarrer.... donc plus qu'a réinstaller Ubuntu, pas cool.
Je suis ensuite passé sur ce forum et j'ai essayé d'installer les pilotes libres selon le tuto fournit.... même problème a la différence que je suis parvenu a remettre en place la copie de l'original qu'il m'avais fait créer.

voila mon xorg.conf:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Monitor		"Écran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Et la config que j'ai essayé:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Driver          "radeon"
	Option          "AGPMode" "4"
	Option          "AGPSize" "64" # default: 8
	Option          "RingSize" "8"
	Option          "BufferSize" "2"
	Option          "EnablePageFlip" "true"
	Option          "EnableDepthMoves" "true"
	Option          "RenderAccel" "true"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Monitor		"Écran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
EndSection

Section "Extensions"
 Option "RENDER" "Enable" 
EndSectio

Section "DRI"
        Mode    0666
EndSection

Que faut-il que je change pour que ca puisse marcher?
Faut-il mieux prendre les pilotes libre ou les pilotes propriétaires pour avoir les meilleures performances?
et comment faire?
- si cette question a été répondue assez clairement sur un autre post, je ne l'ai pas trouvé -

pyrignis · Le 26/04/2007, à 18:44

bon je suis parvenu a lancer glxgears....
et j'obtiens dans les 700FPS

alfa@alfa-linux:~$ glxgears
3424 frames in 5.0 seconds = 684.711 FPS
3093 frames in 5.0 seconds = 618.502 FPS
3686 frames in 5.0 seconds = 737.144 FPS
3682 frames in 5.0 seconds = 736.339 FPS

j'en déduis qu'il n'y a donc effectivement pas d'accélération graphique conséquente

Une autre question: est-il possible de tester le serveur X sans rebooter?

Dernière modification par pyrignis (Le 26/04/2007, à 18:56)

sam air · Le 26/04/2007, à 20:17

j'ai une 9200se et j'ai les meme score,je sais que les fps montais en mettant" DefaultDepth 16"dans la section screen(je suis revenu a 24mais je ne sais plus pourquoi,peut etre pour beryl?) , et pour relancer X sans rebooter tu fais ctrl+alt+ retour arriere

Dernière modification par sam air (Le 26/04/2007, à 20:19)

pyrignis · Le 28/04/2007, à 11:46

Sur la doc officielle on peut lire

Le driver fglrx fontionne pour les cartes à partir de la Radeon 9500 incluse.
Pour avoir l'accélération graphique avec ces anciennes cartes, il faut remplacer l'actuelle libGL.so par celle des pilotes 8.24.8

heuuuu, on fait comment?

Dernière modification par pyrignis (Le 28/04/2007, à 11:46)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 25/04/2007, à 20:39

pilotes ATI Radeon 9200SE

#2 Le 26/04/2007, à 18:44

Re : pilotes ATI Radeon 9200SE

#3 Le 26/04/2007, à 20:17

Re : pilotes ATI Radeon 9200SE

#4 Le 28/04/2007, à 11:46

Re : pilotes ATI Radeon 9200SE

Pied de page des forums