Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#26 Le 24/08/2013, à 07:28

malbo

Re : [Résolu] Aide pour un repartitionnement HP pavilion g6

packard,
Pour le sujet de ton dernier post, je te prie de créer une nouvelle discussion (je t'ai dit comment faire dans le post #18). Pour que j'en sois alerté et que je puisse y intervenir, tu pourras poster ici pour donner le lien vers cette nouvelle discussion.

Hors ligne

#27 Le 24/08/2013, à 08:54

packard

Re : [Résolu] Aide pour un repartitionnement HP pavilion g6

Non, perso c'est bon, je n'ai rien d'autre à ajouter, c'était un exemple concret .

Dernière modification par packard (Le 24/08/2013, à 08:54)

Linux Mint Mate 19.3 Tricia LTS + Seven+ W 10
PC 1 : Asrock 970 Extrème 4 .AMD FX 8350 Black E, Nvidia GTX 1050 TI, RAM : 16 Go Ballistik ,1 SSD Hyper X Savage + Kingston SSDNow UV400 + SSD Samsung.
PC 2 : Gigabyte GA-MA770A-DS-3P ,  Phenom II X4 965 Black E, Nvidia GTX 650 TI
Portables : DELL Latitude E 6410:  i7-640M + Latiude E5530 : I5-3230M.

Hors ligne

#28 Le 28/08/2013, à 11:58

londumas

Re : [Résolu] Aide pour un repartitionnement HP pavilion g6

Bon voila @malbo. J'ai fais ce que tu as dit.
Voila mon boot-repar info : http://paste.ubuntu.com/6036033/

Il me semble que tout sois bon.
Encore merci

Hors ligne

#29 Le 29/08/2013, à 06:26

malbo

Re : [Résolu] Aide pour un repartitionnement HP pavilion g6

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 28Aug2013]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 94 for .
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.04 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20130218
    Boot sector info:  Syslinux looks at sector 1621096 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       According to the info in the boot sector, sdb1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb1 starts at sector 62.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    41,945,087    41,943,040  83 Linux
/dev/sda2          41,945,088    52,430,847    10,485,760  82 Linux swap / Solaris
/dev/sda3          52,430,848 1,250,263,039 1,197,832,192   5 Extended
/dev/sda5          52,432,896 1,250,263,039 1,197,830,144  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 3897 MB, 3897360384 bytes
120 heads, 62 sectors/track, 1023 cylinders, total 7612032 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             62     7,611,119     7,611,058   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1       a27a9427-0968-46ad-8114-c843ea9e9c66   ext3       
/dev/sda1        d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6   ext4       
/dev/sda2        6ead51e4-d920-4a7a-a781-808cc68401e1   swap       
/dev/sda5        ae76efab-1572-4116-b80a-972005f34909   ext4       
/dev/sdb1        E418-68B4                              vfat       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
else
  search --no-floppy --fs-uuid --set=root d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
	else
	  search --no-floppy --fs-uuid --set=root d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
	fi
	linux	/boot/vmlinuz-3.8.0-29-generic root=UUID=d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.8.0-29-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6' {
	menuentry 'Ubuntu, avec Linux 3.8.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-29-generic-advanced-d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
		else
		  search --no-floppy --fs-uuid --set=root d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
		fi
		echo	'Chargement de Linux 3.8.0-29-generic…'
		linux	/boot/vmlinuz-3.8.0-29-generic root=UUID=d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6 ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.8.0-29-generic
	}
	menuentry 'Ubuntu, avec Linux 3.8.0-29-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-29-generic-recovery-d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6' {
	recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
		else
		  search --no-floppy --fs-uuid --set=root d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
		fi
		echo	'Chargement de Linux 3.8.0-29-generic…'
		linux	/boot/vmlinuz-3.8.0-29-generic root=UUID=d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.8.0-29-generic
	}
	menuentry 'Ubuntu, avec Linux 3.8.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
		else
		  search --no-floppy --fs-uuid --set=root d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
		fi
		echo	'Chargement de Linux 3.8.0-19-generic…'
		linux	/boot/vmlinuz-3.8.0-19-generic root=UUID=d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6 ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.8.0-19-generic
	}
	menuentry 'Ubuntu, avec Linux 3.8.0-19-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6' {
	recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
		else
		  search --no-floppy --fs-uuid --set=root d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
		fi
		echo	'Chargement de Linux 3.8.0-19-generic…'
		linux	/boot/vmlinuz-3.8.0-19-generic root=UUID=d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.8.0-19-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
	else
	  search --no-floppy --fs-uuid --set=root d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
	fi
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
	else
	  search --no-floppy --fs-uuid --set=root d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda5 during installation
UUID=ae76efab-1572-4116-b80a-972005f34909 /home           ext4    defaults        0       2
# swap was on /dev/sda2 during installation
UUID=6ead51e4-d920-4a7a-a781-808cc68401e1 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  12.217655182 = 13.118607360   boot/grub/grub.cfg                             1
  18.582702637 = 19.953025024   boot/grub/i386-pc/core.img                     1
   8.650497437 = 9.288400896    boot/vmlinuz-3.8.0-19-generic                  1
   8.677845001 = 9.317765120    boot/vmlinuz-3.8.0-29-generic                  1
   8.677845001 = 9.317765120    vmlinuz                                        1
   8.677845001 = 9.317765120    vmlinuz.old                                    1
   0.867584229 = 0.931561472    boot/initrd.img-3.8.0-19-generic               2
   0.836395264 = 0.898072576    boot/initrd.img-3.8.0-29-generic               1
   0.836395264 = 0.898072576    initrd.img                                     1

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux/syslinux.cfg                          1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             syslinux/chain.c32                             1
            ?? = ??             syslinux/gfxboot.c32                           1
            ?? = ??             syslinux/vesamenu.c32                          1

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda3

00000000  52 43 52 44 28 00 09 00  f0 43 02 45 00 00 00 00  |RCRD(....C.E....|
00000010  01 00 00 00 40 00 22 00  e0 0f ff ff ff ff ff ff  |....@.".........|
00000020  f0 43 02 45 00 00 00 00  04 00 00 00 02 00 20 00  |.C.E.......... .|
00000030  00 00 00 00 00 00 00 00  00 00 ff ff ff ff ff ff  |................|
00000040  0a 20 02 00 00 00 01 00  00 2d 20 0d 00 00 00 00  |. .......- .....|
00000050  be e0 8a 4b 41 78 cd 01  00 02 00 80 00 00 00 00  |...KAx..........|
00000060  00 00 00 00 20 20 00 00  16 00 3c 00 63 00 75 00  |....  ....<.c.u.|
00000070  72 00 76 00 65 00 32 00  65 00 2e 00 74 00 70 00  |r.v.e.2.e...t.p.|
00000080  6d 00 00 00 00 00 00 00  11 42 02 45 00 00 00 00  |m........B.E....|
00000090  f3 41 02 45 00 00 00 00  f3 41 02 45 00 00 00 00  |.A.E.....A.E....|
000000a0  68 00 00 00 00 00 00 00  01 00 00 00 90 00 00 00  |h...............|
000000b0  00 00 00 00 00 00 00 00  0b 00 0b 00 28 00 20 00  |............(. .|
000000c0  48 00 20 00 18 00 01 00  08 01 00 00 02 00 02 00  |H. .............|
000000d0  5f 48 00 00 00 00 00 00  5f 48 0c 00 00 00 00 00  |_H......_H......|
000000e0  00 00 27 0d 00 00 00 00  58 2d 20 0d 00 00 00 00  |..'.....X- .....|
000000f0  58 2d 20 0d 00 00 00 00  00 00 3f 02 00 00 00 00  |X- .......?.....|
00000100  00 00 27 0d 00 00 00 00  00 2d 20 0d 00 00 00 00  |..'......- .....|
00000110  58 2d 20 0d 00 00 00 00  00 00 3f 02 00 00 00 00  |X- .......?.....|
00000120  24 42 02 45 00 00 00 00  11 42 02 45 00 00 00 00  |$B.E.....B.E....|
00000130  00 00 00 00 00 00 00 00  28 00 00 00 00 00 00 00  |........(.......|
00000140  01 00 00 00 90 00 00 00  00 00 00 00 00 00 00 00  |................|
00000150  1b 00 01 00 28 00 00 00  28 00 00 00 18 00 00 00  |....(...(.......|
00000160  00 00 00 00 00 00 02 00  00 00 00 00 00 00 00 00  |................|
00000170  00 2d 20 0d 00 00 00 00  2f 42 02 45 00 00 00 00  |.- ...../B.E....|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000190  98 00 00 00 00 00 00 00  01 00 00 00 90 00 00 00  |................|
000001a0  00 00 00 00 00 00 00 00  14 00 14 00 28 00 38 00  |............(.8.|
000001b0  60 00 38 00 68 05 01 00  00 00 88 01 00 00 00 fe  |`.8.h...........|
000001c0  ff ff 83 fe ff ff 00 08  00 00 00 70 65 47 00 00  |...........peG..|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
File descriptor 8 (/proc/11175/mounts) leaked on lvscan invocation. Parent PID 20029: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-08-28__11h51 ===================
boot-repair version : 3.199~ppa22~raring
boot-sav version : 3.199~ppa22~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa22~raring
boot-repair is executed in live-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss

=================== os-prober:
/dev/sda1:Ubuntu 13.04 (13.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="a27a9427-0968-46ad-8114-c843ea9e9c66" TYPE="ext3"
/dev/sda1: UUID="d3fd48e7-f5d7-4f6c-a0ee-1d4aebf5e6a6" TYPE="ext4"
/dev/sda2: UUID="6ead51e4-d920-4a7a-a781-808cc68401e1" TYPE="swap"
/dev/sda5: UUID="ae76efab-1572-4116-b80a-972005f34909" TYPE="ext4"
/dev/sdb1: UUID="E418-68B4" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== sda1/etc/grub.d/ :
drwxr-xr-x  2 root root      4096 avril 24 19:05 grub.d
total 72
-rwxr-xr-x 1 root root  7541 avril  9 11:29 00_header
-rwxr-xr-x 1 root root  5974 avril  9 10:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril  9 11:29 10_linux
-rwxr-xr-x 1 root root 10258 avril  9 11:29 20_linux_xen
-rwxr-xr-x 1 root root  1688 déc.   5  2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril  9 11:29 30_os-prober
-rwxr-xr-x 1 root root  1426 avril  9 11:29 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril  9 11:29 40_custom
-rwxr-xr-x 1 root root   216 avril  9 11:29 41_custom
-rw-r--r-- 1 root root   483 avril  9 11:29 README




=================== sda1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
EFI in dmesg.
[    0.000000] ACPI: UEFI 00000000aaffd000 00236 (v01 HPQOEM 1841     00000001 ACPI 00040000)
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda5	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST640LM000 HM641 (scsi)
Disk /dev/sda: 640GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      1049kB  21.5GB  21.5GB  primary   ext4            boot
2      21.5GB  26.8GB  5369MB  primary   linux-swap(v1)
3      26.8GB  640GB   613GB   extended
5      26.8GB  640GB   613GB   logical   ext4


Model:  USB DISK 30X (scsi)
Disk /dev/sdb: 3897MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      31.7kB  3897MB  3897MB  primary  fat32        boot, lba

=================== parted -lm:

BYT;
/dev/sda:640GB:scsi:512:512:msdos:ATA ST640LM000 HM641;
1:1049kB:21.5GB:21.5GB:ext4::boot;
2:21.5GB:26.8GB:5369MB:linux-swap(v1)::;
3:26.8GB:640GB:613GB:::;
5:26.8GB:640GB:613GB:ext4::;

BYT;
/dev/sdb:3897MB:scsi:512:512:msdos: USB DISK 30X;
1:31.7kB:3897MB:3897MB:fat32::boot, lba;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs 1008M  166M  792M  18% /
udev           devtmpfs   1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs      386M  848K  385M   1% /run
/dev/sdb1      vfat       3.7G  1.8G  1.9G  49% /cdrom
/dev/loop0     squashfs   738M  738M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.9G  1.1M  1.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      1.9G   76K  1.9G   1% /run/shm
none           tmpfs      100M   40K  100M   1% /run/user
/dev/sda1      ext4        20G  4.5G   15G  25% /mnt/boot-sav/sda1
/dev/sda5      ext4       563G   89G  446G  17% /mnt/boot-sav/sda5

=================== fdisk -l:

Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006c662

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048    41945087    20971520   83  Linux
/dev/sda2        41945088    52430847     5242880   82  Linux swap / Solaris
/dev/sda3        52430848  1250263039   598916096    5  Extended
/dev/sda5        52432896  1250263039   598915072   83  Linux

Disk /dev/sdb: 3897 MB, 3897360384 bytes
120 heads, 62 sectors/track, 1023 cylinders, total 7612032 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00030593

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          62     7611119     3805529    c  W95 FAT32 (LBA)



(process:16455): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed

(process:16462): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed

(process:16550): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed

(process:16600): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed

=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

Pour moi, c'est parfait et ça correspond à ce que je t'avais proposé dans le post #12.

Edit : une petite remarque pour ton information : on voit sur cet extrait de ton Boot-Info que la partition racine (sda1) est bootable (il y a le symbole * dans la colonne Boot) :

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    41,945,087    41,943,040  83 Linux
/dev/sda2          41,945,088    52,430,847    10,485,760  82 Linux swap / Solaris
/dev/sda3          52,430,848 1,250,263,039 1,197,832,192   5 Extended
/dev/sda5          52,432,896 1,250,263,039 1,197,830,144  83 Linux

C'est Windows qui utilise le drapeau Boot pour savoir sur quelle partition il doit démarrer mais Grub qui gère ton démarrage n'utilise pas cela : si tu enlevais le drapeau Boot à cette partition (ne le fais pas, c'est inutile), ton Ubuntu fonctionnerait de la même façon. C'est un détail mais comme c'est toi qui a construit ton partitionnement, je te le signale.

Dernière modification par malbo (Le 29/08/2013, à 06:35)

Hors ligne

#30 Le 29/08/2013, à 07:39

packard

Re : [Résolu] Aide pour un repartitionnement HP pavilion g6

Re-bonjour, petite question la /dev/sdb1 :

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 3897 MB, 3897360384 bytes
120 heads, 62 sectors/track, 1023 cylinders, total 7612032 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             62     7,611,119     7,611,058   c W95 FAT32 (LBA)

Cela correspond bien à la petite partition de boot , d'un bios UEFI ?

Promis la prochaine fois ,j'irais poster ailleur .

Dernière modification par packard (Le 29/08/2013, à 07:40)

Linux Mint Mate 19.3 Tricia LTS + Seven+ W 10
PC 1 : Asrock 970 Extrème 4 .AMD FX 8350 Black E, Nvidia GTX 1050 TI, RAM : 16 Go Ballistik ,1 SSD Hyper X Savage + Kingston SSDNow UV400 + SSD Samsung.
PC 2 : Gigabyte GA-MA770A-DS-3P ,  Phenom II X4 965 Black E, Nvidia GTX 650 TI
Portables : DELL Latitude E 6410:  i7-640M + Latiude E5530 : I5-3230M.

Hors ligne

#31 Le 29/08/2013, à 09:16

londumas

Re : [Résolu] Aide pour un repartitionnement HP pavilion g6

Un grand merci @malbo

Hors ligne

#32 Le 31/08/2013, à 14:08

Babdu89

Re : [Résolu] Aide pour un repartitionnement HP pavilion g6

Bonjour.
Si je peux me permettre.

@packard.

Cela correspond bien à la petite partition de boot , d'un bios UEFI ?

Ben non ,il faut faire comme moi... Lire le rapport boot info en entier.

Et tu verras que /dev/sdb1 est la clé usb live (4Go) Ubuntu 13.04, ayant servi à faire le boot info.

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20130218
    Boot sector info:  Syslinux looks at sector 1621096 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       According to the info in the boot sector, sdb1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb1 starts at sector 62.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
boot-repair is executed in live-session (Ubuntu 13.04, raring, Ubuntu, x86_64)

Je pense, malbo confirmera, que cette Ubuntu 13.04 doit pouvoir démarrer en session live aussi bien en UEFI que mode Bios .

@+.    Babdu89   .

J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

Pages : 1 2