Pages : 1
#1 Le 16/05/2007, à 10:59
- cassini
Plus Rien ne boot apres install Feisty Fawn
J'ai tenter pour la premiere fois d'installer ubuntu sur un disque dur contenant deja un windows xp.
J'ai suivi le tuto , pour ce qui concernait le partitionnement et l'installation , tout s'est passé sans pb jusqu'au reboot.
La j'ai eu la premiere fois droit a une erreur 21 qui , en suivant les differents posts , correspondait a un pb de reconnaissance du hdd par grub.
voici ma config de grub
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 4
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=457643ba-6d30-44dd-a5b8-6d6fc67265bd ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,7)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.20-15-generic
root (hd0,7)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=457643ba-6d30-44dd-a5b8-6d6fc67265bd ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault
title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=457643ba-6d30-44dd-a5b8-6d6fc67265bd ro single
initrd /boot/initrd.img-2.6.20-15-generic
title Ubuntu, memtest86+
root (hd0,7)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professionnel
root (hd0,0)
savedefault
makeactive
chainloader +1
Ne pouvant non plus boot sur ma partoche win , j'ai voulu faire un fixmbr qui m'a donner ensuite un "joli"
DISK BOOT FAILURE INSERT SYSTEM DISK AND PRESS ENTER
J'en suis la , et je demande votre aide avant d'avoir a formater tout ...
merci d'avance
pour info le fdisk -l
Disque /dev/sda: 320.0 Go, 320072933376 octets
255 têtes, 63 secteurs/piste, 38913 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 1 9591 77039676 7 HPFS/NTFS
/dev/sda2 9592 38913 235528965 f W95 Etendu (LBA)
/dev/sda5 9592 19790 81923436 7 HPFS/NTFS
/dev/sda6 19791 35088 122881153+ 7 HPFS/NTFS
/dev/sda7 35089 35210 979933+ 82 Linux swap / Solaris
/dev/sda8 35211 36426 9767488+ 83 Linux
/dev/sda9 36427 38250 14651248+ 83 Linux
/dev/sda10 38251 38913 5325516 b W95 FAT32
ubuntu@ubuntu:~$
#2 Le 16/05/2007, à 11:15
- Astier
Re : Plus Rien ne boot apres install Feisty Fawn
Dans ton Grub on voit ça
title Ubuntu, kernel 2.6.20-15-generic
root (hd0,7)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=457643ba-6d30-44dd-a5b8-6d6fc67265bd ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault
Or il semblerait que cette partition corresponde à ta partition swap ; je pense que ton système Ubuntu se situe plutôt sur une de ces deux partitions :
/dev/sda8 35211 36426 9767488+ 83 Linux
/dev/sda9 36427 38250 14651248+ 83 Linux
Au démarrage tu peux tenter de rentre dans le Grub et éditer la ligne correpsondant à ton noyau Ubuntu en appuyant sur e puis modifier la partition sur laquelle ilo doit booter.
C'est seulement une piste, je suis pas un grand spécialiste.
A bientôt
Hors ligne
#3 Le 16/05/2007, à 11:39
- Compte anonymisé
Re : Plus Rien ne boot apres install Feisty Fawn
Salut cassini et Astier
Le menu.lst est bon :
(hd0,7) pour grub correspond à /dev/sda8.
Ce qui manque pour booter windows c'est une partition active /dev/sda1.
Pour l'activer tu peux le faire depuis le livecd :
sudo parted /dev/sda set 1 boot on et
sudo parted /dev/sda print pour vérifier. Tu devrais pouvoir booter sur windows.
@+
#4 Le 16/05/2007, à 12:01
- cassini
Re : Plus Rien ne boot apres install Feisty Fawn
j ai tenter ce que disait astier effectivement ca ne change rien vu que ca ne boot pas du tout sur grub
je test ce que tu indique jeanjd63
ca me donne pour info apres le set 1 boot on
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 78.9GB 78.9GB primary ntfs boot
2 78.9GB 320GB 241GB extended lba
5 78.9GB 163GB 83.9GB logical ntfs
6 163GB 289GB 126GB logical ntfs
7 289GB 290GB 1003MB logical linux-swap
8 290GB 300GB 10.0GB logical ext3
9 300GB 315GB 15.0GB logical ext3
10 315GB 320GB 5453MB logical fat32
Information: Don't forget to update /etc/fstab, if necessary.
#5 Le 16/05/2007, à 12:18
- cassini
Re : Plus Rien ne boot apres install Feisty Fawn
Merci Jeanjd63, j'ecris ce message depuis windows , ca boot sans pb dessus
par contre je n'ai plus grub au demarrage now , j'ai tjrs pas pu tester ubuntu sans passer par le live cd , une soluce ?
#6 Le 16/05/2007, à 14:12
- Compte anonymisé
Re : Plus Rien ne boot apres install Feisty Fawn
ReSalut
Avec le livecd tu peux remettre le boot secteur de grub par la manip suivante :
sudo grub -> grub> la taper :
grub> find /boot/grub/menu.lst ce qui devrait donner maintenant: (hd0,7)
là tu tapes :
grub> root (hd0,7) et pour écrire le Boot loader de grub sur /dev/sda :
grub> setup (hd0) et enfin quitter par :
grub> quit
Si tu as à nouveau une erreur 21 tu peux toujours restaurer le mbr windows.
@+
#7 Le 16/05/2007, à 14:40
- cassini
Re : Plus Rien ne boot apres install Feisty Fawn
ok je testerais ce soir en sortant du boulot merci de l'info