Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 28/02/2013, à 19:05

simsim10912

[RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

Bonjour,
Je viens de faire la mise à jour vers ubuntu 12.04, et comme par magie, je n'ai plus de wifi...

leclercq@leclercq-desktop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS"
leclercq@leclercq-desktop:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 002 Device 002: ID 1737:0079 Linksys WUSB600N v2 Dual-Band Wireless-N Network Adapter [Ralink RT3572]
Bus 006 Device 002: ID 05fe:2001 Chic Technology Corp. 
leclercq@leclercq-desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2 port SATA Controller [IDE mode] (rev 02)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface (rev b1)
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
leclercq@leclercq-desktop:~$ lspci -nn | grep -i net
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
leclercq@leclercq-desktop:~$ lspci -k
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: i915
	Kernel modules: intelfb, i915
00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI Controller (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: mei
	Kernel modules: mei
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
	Subsystem: Intel Corporation Device 0001
	Kernel driver in use: e1000e
	Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
	Subsystem: Intel Corporation Device 2114
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA Controller [IDE mode] (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2 port SATA Controller [IDE mode] (rev 02)
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: ata_piix
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface (rev b1)
	Subsystem: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface
	Kernel driver in use: pata_marvell
	Kernel modules: pata_marvell
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
	Subsystem: Intel Corporation Device 514d
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire-ohci
leclercq@leclercq-desktop:~$ sudo lshw -C network
[sudo] password for leclercq: 
  *-network               
       description: Ethernet interface
       produit: 82566DC Gigabit Network Connection
       fabriquant: Intel Corporation
       identifiant matériel: 19
       information bus: pci@0000:00:19.0
       nom logique: eth0
       version: 02
       numéro de série: 00:19:d1:e3:47:0c
       taille: 100Mbit/s
       capacité: 1Gbit/s
       bits: 32 bits
       horloge: 33MHz
       fonctionnalités: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=1.1-0 ip=192.168.1.3 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       ressources: irq:45 mémoire:90300000-9031ffff mémoire:90324000-90324fff portE/S:20c0(taille=32)
leclercq@leclercq-desktop:~$ lsmod
Module                  Size  Used by
snd_hrtimer            12648  1 
pci_stub               12550  1 
vboxpci                22911  0 
vboxnetadp             13328  0 
vboxnetflt             27240  0 
vboxdrv               252189  3 vboxpci,vboxnetadp,vboxnetflt
dm_crypt               22528  0 
rfcomm                 38139  0 
bnep                   17830  2 
bluetooth             158479  10 rfcomm,bnep
binfmt_misc            17292  1 
ppdev                  12849  0 
snd_hda_codec_idt      60251  1 
snd_hda_intel          32765  3 
snd_hda_codec         109562  2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80916  2 snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0 
snd_rawmidi            25424  1 snd_seq_midi
snd_seq_midi_event     14475  1 snd_seq_midi
psmouse                96718  0 
serio_raw              13027  0 
snd_seq                51592  3 snd_seq_midi,snd_seq_midi_event
snd_timer              28931  3 snd_hrtimer,snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    62218  16 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc             32114  1 
soundcore              14635  1 snd
snd_page_alloc         14115  2 snd_hda_intel,snd_pcm
mac_hid                13077  0 
mei                    36570  0 
firewire_sbp2          18346  0 
lp                     17455  0 
parport                40930  3 ppdev,parport_pc,lp
usbhid                 41937  0 
hid                    77428  1 usbhid
firewire_ohci          40180  0 
firewire_core          56940  2 firewire_sbp2,firewire_ohci
crc_itu_t              12627  1 firewire_core
pata_marvell           12763  0 
i915                  423416  3 
drm_kms_helper         45466  1 i915
drm                   197641  4 i915,drm_kms_helper
e1000e                140131  0 
i2c_algo_bit           13199  1 i915
video                  19115  1 i915
usb_storage            39646  0 
leclercq@leclercq-desktop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.
leclercq@leclercq-desktop:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:19:d1:e3:47:0c  
          inet adr:192.168.1.3  Bcast:192.168.1.255  Masque:255.255.255.0
          adr inet6: fe80::219:d1ff:fee3:470c/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:1813 erreurs:0 :0 overruns:0 frame:0
          TX packets:2005 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          Octets reçus:1188141 (1.1 MB) Octets transmis:418815 (418.8 KB)
          Interruption:20 Mémoire:90300000-90320000 

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:8 erreurs:0 :0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          Octets reçus:480 (480.0 B) Octets transmis:480 (480.0 B)
leclercq@leclercq-desktop:~$ sudo iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.
leclercq@leclercq-desktop:~$ uname -r -m 
3.2.0-38-generic i686
leclercq@leclercq-desktop:~$ cat  /etc/network/interfaces
auto lo ra0
allow-hotplug ra0
iface lo inet loopback


auto eth1
#iface eth1 inet dhcp

auto eth2
#iface eth2 inet dhcp

auto ath0
#iface ath0 inet dhcp

auto wlan0
#iface wlan0 inet dhcp










































iface eth0 inet dhcp







auto eth0

auto ppp0
iface ppp0 inet ppp
provider adslusb
leclercq@leclercq-desktop:~$ nm-tool

** (process:2982): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: The name org.freedesktop.NetworkManager was not provided by any .service files

NetworkManager Tool

State: unknown


** (process:2982): WARNING **: error: could not connect to NetworkManager
leclercq@leclercq-desktop:~$ sudo rfkill list

D'avance merci pour votre aide, je n'y arrive vraiment pas...

Dernière modification par simsim10912 (Le 28/02/2013, à 21:22)

Hors ligne

#2 Le 28/02/2013, à 19:12

tuxmarc

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

Bonsoir

Un truc très simple qui marche des fois : débrancher et rebrancher la clé wifi.
Des fois ça m'a tiré d'affaire.


Vive Richard Stalmann, Linus Torvalds, et tous les fondus de Linux.
De l'Ordinosaure fait à 90% de récup, à deux portables LDLC,  neufs sans système et une carte mère sans boitier, tous libres !!
Parrain Linux sur www.parrain-linux.com et www.parrains.linux.free.fr

Hors ligne

#3 Le 28/02/2013, à 19:15

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

C'est vrai que parfois il ne suffit que de ça... mais malheureusement pas cette fois-ci...
Par contre, une chose : il ne détecte pas de réseau (j'ai, pendant l'écran de démarrage, une phrase du style "No network configuration")

Hors ligne

#4 Le 28/02/2013, à 19:21

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

salut
si tu as deja installé le driver proprietaire RT3572usb sur la version ubuntu precedente,il faudra le reinstaller.
sinon

sudo modprobe rt2800usb

Hors ligne

#5 Le 28/02/2013, à 19:25

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

chibbata a écrit :

salut
si tu as deja installé le driver proprietaire RT3572usb sur la version ubuntu precedente,il faudra le reinstaller.
sinon

sudo modprobe rt2800usb
leclercq@leclercq-desktop:~$ sudo modprobe rt2800usb
[sudo] password for leclercq: 
WARNING: All config files need .conf: /etc/modprobe.d/bluez, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.

Sinon j'ai chargé le driver, mais je ne sais pas comment l'employer...

Hors ligne

#6 Le 28/02/2013, à 19:34

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

sudo rmmod rt2800usb
sudo apt-get install linux-headers-generic build-essential
wget http://dl.dropbox.com/u/11876059/2011_0427_RT3572_Linux_STA_v2.5.0.0.AE1000.tar.gz
tar -xvf 2011_0427_RT3572_Linux_STA_v2.5.0.0.AE1000.tar.gz
cd ~/2011_0427_RT3572_Linux_STA_v2.5.0.0.AE1000
make
sudo make install

si pas d'erreurs

sudo modprobe rt3572sta

Hors ligne

#7 Le 28/02/2013, à 19:40

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

leclercq@leclercq-desktop:~/2011_0427_RT3572_Linux_STA_v2.5.0.0.AE1000$ sudo modprobe rt3572sta
WARNING: All config files need .conf: /etc/modprobe.d/bluez, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.

Tout le reste avant est passé sans problème...
En attendant, je redémarre... Dejà merci pour tes réponses smile

Hors ligne

#8 Le 28/02/2013, à 19:47

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

apparemment, rien de changé...

Hors ligne

#9 Le 28/02/2013, à 19:50

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

sudo modprobe rt3572sta

tu ne vois pas de reseau wifi ?
post

cat /etc/NetworkManager/NetworkManager.conf

Hors ligne

#10 Le 28/02/2013, à 19:52

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

Toujours la même réponse pour le premier...

leclercq@leclercq-desktop:~$ cat /etc/NetworkManager/NetworkManager.conf
# This file is installed into /etc/NetworkManager, and is loaded by 
# NetworkManager by default.  To override, specify: '--config file' 
# during NM startup.  This can be done by appending to DAEMON_OPTS in 
# the file:
#
# /etc/default/NetworkManager
#

[main]
plugins=ifupdown,keyfile

no-auto-default=00:14:7f:8f:70:61,

[ifupdown]
managed=true

Hors ligne

#11 Le 28/02/2013, à 19:57

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

gksudo gedit /etc/network/interfaces

supprimes tout sauf ces 2 lignes
auto lo
iface lo inet loopback

enregistres et quittes gedit

sudo service network-manager restart

Hors ligne

#12 Le 28/02/2013, à 20:01

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

je garde :

auto lo ra0
allow-hotplug ra0
iface lo inet loopback

?ou je supprime la ligne du milieu?

Hors ligne

#13 Le 28/02/2013, à 20:02

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

ne garde que ces 2 lignes:
auto lo
iface lo inet loopback

Hors ligne

#14 Le 28/02/2013, à 20:09

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

après redémarrage, je vois les connections réseau, ce que je ne voyais pas avant sur la barre au dessus de l'écran...
Et au démarrage, il ne dit plus qu'il démarre sans connection réseau...

Mais toujours pas de wifi, même en débranchant / rebranchant...

Hors ligne

#15 Le 28/02/2013, à 20:15

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

post

lsmod |grep rt

Hors ligne

#16 Le 28/02/2013, à 20:19

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

leclercq@leclercq-desktop:~$ lsmod |grep rt
snd_hrtimer            12648  1 
rt3572sta             597248  0 
snd_timer              28931  3 snd_hrtimer,snd_pcm,snd_seq
parport_pc             32114  1 
parport                40930  3 ppdev,lp,parport_pc

Hors ligne

#17 Le 28/02/2013, à 20:30

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

tu vois les reseau wifi ou pas ?
si non

sudo rmmod rt3572sta
sudo modprobe rt2800usb

Hors ligne

#18 Le 28/02/2013, à 20:35

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

Ca fonctionne!
Par contre, je ne sais pas te dire si c'était avant ou après ce que tu m'a dit de faire.

Je redémarre, et si ca fonctionne toujours, je cloture le sujet!
Deja merci chibbata!

Hors ligne

#19 Le 28/02/2013, à 20:41

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

Piouf, ca fonctionnait, et après le redémarrage ca ne va plus...

Hors ligne

#20 Le 28/02/2013, à 20:41

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

sudo rmmod rt3572sta
sudo modprobe rt2800usb

Hors ligne

#21 Le 28/02/2013, à 20:43

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

quand je fais ca, il se connecte au wifi, mais me dit

leclercq@leclercq-desktop:~$ sudo rmmod rt3572sta
[sudo] password for leclercq: 
leclercq@leclercq-desktop:~$ sudo modprobe rt2800usb
WARNING: All config files need .conf: /etc/modprobe.d/bluez, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.

Hors ligne

#22 Le 28/02/2013, à 20:50

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

WARNING: All config files need .conf: /etc/modprobe.d/bluez, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
il manque .conf au 2 fichiers
post

cat /etc/modprobe.d/bluez
cat /etc/modprobe.d/blacklist
cat /etc/modprobe.d/blacklist.conf

Dernière modification par chibbata (Le 28/02/2013, à 20:50)

Hors ligne

#23 Le 28/02/2013, à 20:53

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

leclercq@leclercq-desktop:~$ cat /etc/modprobe.d/bluez
# BlueZ modules

# These are all in the default aliases file.  Uncomment them only
# if for some reason you need them.
#alias net-pf-31 bluetooth
#alias bt-proto-0 l2cap
#alias bt-proto-2 sco
#alias bt-proto-3 rfcomm
#alias bt-proto-4 bnep
#alias bt-proto-5 cmtp
#alias tty-ldisc-15 hci_uart

# HIDP is not yet in the standard aliases file.
alias bt-proto-6 hidp

# Uncomment this if you wish to use VHCI
# Unfortunately no minor has been assigned.
# alias char-major-10-250 hci_vhci
leclercq@leclercq-desktop:~$ cat /etc/modprobe.d/blacklist

# old driver eagle-usb replaced by ueagle-atm
blacklist eagle-usb
leclercq@leclercq-desktop:~$ cat /etc/modprobe.d/blacklist.conf
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
# Pour garantir le chargement de RT3572STA
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
blacklist rt2870
blacklist b43
blacklist bcma
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
blacklist rt2800pci

Hors ligne

#24 Le 28/02/2013, à 21:01

chibbata

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

les 2 premiers fichiers ne servent a rien

sudo rm /etc/modprobe.d/bluez
sudo rm /etc/modprobe.d/blacklist

pour le 3eme fichier

gksudo gedit /etc/modprobe.d/blacklist.conf

supprimes ces lignes

blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
blacklist rt2870
blacklist b43
blacklist bcma
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
blacklist rt2800pci

tu ajoutes cette ligne
blacklist rt3572sta


enregistres et quittes gedit

sudo apt-get install linux-backports-modules-cw-3.6-precise-generic

redemarres le pc

Dernière modification par chibbata (Le 28/02/2013, à 21:01)

Hors ligne

#25 Le 28/02/2013, à 21:08

simsim10912

Re : [RESOLU] Wifi avec WUSB60Nv2 Linksys ne fonctionne pas sous 12.04

ca refonctionne, même après le démarrage!
Merci beaucoup pour ta patience et pour cette résolution rapide!
J'espère ne plus devoir revenir vers toi...

Hors ligne