Samba-windows

pami_y · Le 22/05/2007, à 16:43

Voilà comment se présente mon fichier de configuration de samba.Quelqu'un peut il me dire pourquoi avec ce fichier les machine windows n'arrive à se connecter à ce domaine?ou bien pourquoi la machine narrive pas à voir les machines windows?Merci

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = AFB
netbios name = proxyafb

# server string is the equivalent of the NT Description field
; server string = %h server (Samba, Ubuntu)
server string = server %v

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
name resolve order = wins lmhosts host bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
interfaces = 192.168.5.100/24 eth0 192.168.1.2/24 eth1 127.0.0.0/8 loopback

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = true
hosts allow 192.168.5

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
max log size = 10000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
; syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html
# in the samba-doc package for details.
security = user

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
share modes =yes
admin users = @smbadmin ryombi

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
passdb expand explicit = no

#Scripts for file (passwd,smbpasswd) backend :
add user script = /usr/sbin/useradd -s -g smbusers /bin/false'%u'
delete user script = /usr/sbin/userdel'%s'
add user to group script = /usr/sbin/gpasswd -a 'u%''%g'
delete user from group script=/usr/sbin/gpasswd -d '%u''%g'
set primary group script =/usr/sbin/usermod -g '%g''%u'
add group script = /usr/sbin/groupadd %g && getent group '%|awk-F:'{print$3}'
delete group script=/usr/sbin/groupdel '%g'

; obey pam restrictions = yes

guest account = invite
map to guest = bad user
valid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .

# Unix users can map to different SMB User names
username map = /etc/samba/smbusers

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
; pam password change = no

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
domain logons = yes
os level = 65
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
; logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
; logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
add user script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account'-s /bin/false -M %u
########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
printing = cups
printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
; printer admin =lpradmin

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
domain master = yes

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
[roxane]
comment = Home Directories
path = /home/
browseable = yes

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
valid users = %S

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
writable = yes

# File creation mask is set to 0600 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0664.
create mask = 0600

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
[netlogon]
comment = Network Logon Service
path = /var/samba/netlogon
guest ok = yes
writable = no
share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
[profiles]
comment = Users profiles
path = /var/samba/profiles
guest ok = yes
browseable = yes
create mask = 0600
directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /tmp
printable = yes
public = yes
writable = no
create mode = 0700
hosts allow = 192.168.5.

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
write list = @smbadmin root julien nancy maryse
hosts allow = 192.168.5.
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
; write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
[cdrom]
comment = Samba server's CD-ROM
writable = no
locking = no
path = /cdrom
public = yes
hosts allow = 192.168.5.

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
preexec = /bin/mount /cdrom
postexec = /bin/umount /cdrom

[Ubuntu7.04]
comment= le nouveau SE de Linux
path = /home/roxane/Desktop/ubuntu-7.04-alternate-i386.iso
public = yes
browseable = yes
writeable = yes
create mask = 0600
directory mask = 0700
guest ok = yes
# guest only = no
hosts allow = 192.168.5.
valid users = @smbadmin root roxane

[essai 1]
Comment= ceci_n'est_qu'un_essai
path = /home/roxane/ résumé-page-web.odt
public = yes
write list=@smbadmin @crmekip @crmaudiovisuel
valid users = nancy maryse eric
create mode = 0770
force group = crmaudiovisuel

figaro · Le 22/05/2007, à 17:02

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = true
hosts allow 192.168.5

hosts allow 192.168.5 ----> hosts allow = 192.168.5. avec le point à la fin !

Dernière modification par figaro (Le 22/05/2007, à 17:03)

pami_y · Le 23/05/2007, à 15:55

Bonjour Figaro le il y'a bien un point à la fin de cette adresse.Ce que je comprends toujours pas c'est quand je fais le testparm,il m'affiche les erreurs suivantes:
params.c:Parameter()-Ignoring badly formed line in configuration file hosts allow 192.168.5
can't find include file /etc/samba/smb.conf
Est ce que c'est ce qui bloque la connexion à mon serveur?

figaro · Le 23/05/2007, à 16:00

Tu as plusieurs fois hosts allows dans ton smb.conf, vas au paragraphe que je cite, c'est là que tu as l'erreur dans la section [global] au paragraphe "Networking".

Pas de point final et pas de signe =

Dernière modification par figaro (Le 23/05/2007, à 16:04)

pami_y · Le 23/05/2007, à 16:05

ok; merci je vais le corriger et te donner les évolutions

pami_y · Le 23/05/2007, à 16:08

Il y'a toujours les même messages d'erreurs

pami_y · Le 23/05/2007, à 16:13

Non finalement tu as raison, mais la 2e erreur est tjrs là.
can't find include file /etc/samba.smb.conf

figaro · Le 23/05/2007, à 16:24

pami_y a écrit :

Non finalement tu as raison, mais la 2e erreur est tjrs là.
can't find include file /etc/samba.smb.conf

l'adresse du fichier de configuration c'est

/etc/samba/smb.conf

tu es un peu fâché avec la syntaxe !

commentes cette ligne

include = /etc/samba/smb.conf.%m

avec un ; en début de ligne tu utilises le smb.conf par défaut cette ligne c'est pour utiliser un autre smb.conf personnalisé par client en plus elle comporte une erreur on ne place pas ces fichiers personnalisés dans le système mais dans son home.

Tu as quand même pas mal bricolé dans le smb.conf , cela ressemble à une salade composée

Dernière modification par figaro (Le 23/05/2007, à 16:37)

pami_y · Le 23/05/2007, à 16:41

Excuse moi pour la syntaxe j'ai tellement de chose dans la tête depuis que j'ai commencé cette config si bien que ça me porte préjudice.
Pour mon fichier /etc/samba/smb.conf j'ai essayé de l'arrangé pour une part parce qu'il y avait certains éléments absents par rapports à la version 2 de samba.Pour dire vrai c'est la première fois que je configure un serveur samba et j'aimerais qu'il fonctionne bien.Je vais commenter la ligne que tu as montré et je te donne des nouvelles

pami_y · Le 23/05/2007, à 16:51

finalement il n'ya plus d'erreur générée lors du testparm.Mais j'ai une autre préoccupation.Quand je fais smbstatus, le resulat suivant s'affiche:
PID Username Group Machine
-----------------------------------------
Service pid machine connect at
-----------------------------------------
No locked files
Je trouve que ce fichier ci est assez vide? est-ce normal ou pas?

figaro · Le 23/05/2007, à 16:54

Ton problème c'est que tu as voulu faire compliqué tout de suite alors qu'il faut faire cela calmement pas à pas, sans mettre toutes les options tout de suite, options qui sont la plupart du temps inutiles pour un réseau domestique ou de petite entreprise.
Vois mon blog tu as une méthode pas à pas qui te permet d'aboutir à quelque chose de simple mais opérationnel. Tu commences par le post le plus ancien. Pas de salade mais une progression dans la configuration du réseau, on va à l'étape suivante seulement quand l'étape en cours est opérationnelle, cela évite les galères car il y a pas mal de paramètres à configurer en dehors du smb.conf (firewalls, permissions des dossiers partagés et fichiers hosts en particulier).

J'ai fait cela suite aux nombreux déboires rencontrés sur le forum pour aider les naufragés de Samba.
Ceux qui ont suivi ma méthode, m'ont tous remerciés. aie les chevilles

PS tu peux même télécharger un fichier en pdf ce qui te permets d'imprimer et de bien suivre toutes les lignes et tous les mots: ils sont tous importants.

Dernière modification par figaro (Le 23/05/2007, à 16:57)

figaro · Le 23/05/2007, à 17:01

pami_y a écrit :

finalement il n'ya plus d'erreur générée lors du testparm.Mais j'ai une autre préoccupation.Quand je fais smbstatus, le resulat suivant s'affiche:
PID Username Group Machine
-----------------------------------------
Service pid machine connect at
-----------------------------------------
No locked files
Je trouve que ce fichier ci est assez vide? est-ce normal ou pas?

Cela est assez normal si personne n'est connecté au serveur.

pami_y · Le 23/05/2007, à 17:46

ok.Merci je vais y faire un tour et je te donnerai des nouvelles.A+

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 22/05/2007, à 16:43

Samba-windows

#2 Le 22/05/2007, à 17:02

Re : Samba-windows

#3 Le 23/05/2007, à 15:55

Re : Samba-windows

#4 Le 23/05/2007, à 16:00

Re : Samba-windows

#5 Le 23/05/2007, à 16:05

Re : Samba-windows

#6 Le 23/05/2007, à 16:08

Re : Samba-windows

#7 Le 23/05/2007, à 16:13

Re : Samba-windows

#8 Le 23/05/2007, à 16:24

Re : Samba-windows

#9 Le 23/05/2007, à 16:41

Re : Samba-windows

#10 Le 23/05/2007, à 16:51

Re : Samba-windows

#11 Le 23/05/2007, à 16:54

Re : Samba-windows

#12 Le 23/05/2007, à 17:01

Re : Samba-windows

#13 Le 23/05/2007, à 17:46

Re : Samba-windows

Pied de page des forums