Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

#76 Le 25/04/2013, à 13:42

bibzou

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,
j utilise bumblebee  depuis un moment et cela foncionne a merveille.Je me rend compte que j utilise mon pc portable juste en desktop donc je souhaiterais  desactiver et tout supprimer de nvidia et de bumblebee proprement via quelle commande s il vous plait?
a pres je comptait utiliser:
sudo apt-get install bumblebee --no-install-recommends
est ce bon?
Je compte faire cela pour une meilleur autonomie
Merci

Dernière modification par bibzou (Le 25/04/2013, à 13:50)


Ubuntu 13.10 -XPS 14z-ssd 60 giga-Bumblebee - NVIDIA Optimus support for Linux

Hors ligne

#77 Le 25/04/2013, à 13:50

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Quel est ton objectif ? Si c'est juste d'éteindre la carte graphique en permanence et de ne pas s'en servir, alors par rapport à ton installation actuelle le plus simple est ceci (en remplaçant nvidia-current par le paquet installé éventuellement si ce n'est pas celui-ci) :

sudo apt-get purge bumblebee-nvidia nvidia-current virtulalgl virtualgl-libs
sudo apt-get autoremove

Si c'est de te servir uniquement de la carte nVidia, c'est pas comme ça qu'il faut faire.

Hors ligne

#78 Le 25/04/2013, à 14:08

bibzou

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Je cherche a avoir une meilleur autonomie sur mon pc portable,alors je me dit que si je désactive la carte nvidia en permanence ca peut etre mieux.Qu en penses tu?


Ubuntu 13.10 -XPS 14z-ssd 60 giga-Bumblebee - NVIDIA Optimus support for Linux

Hors ligne

#79 Le 25/04/2013, à 14:16

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Qu'actuellement elle est déjà désactivée en permanence, sauf quand tu t'en sers via optirun. Mais que si tu n'as pas besoin d'optirun, tu peux faire ce que je t'ai dit au-dessus, tu gagneras une centaine de Mo sur ton disque dur.

Hors ligne

#80 Le 25/04/2013, à 14:17

Nepenthes

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Je confirme, Bumblebee 3.2 fonctionne parfaitement avec le paquet nvidia-319 de xorg-edgers.


Ancien PC portable : Asus N43SL (Intel i7 2630QM, 4Go RAM, nVidia GeForce GT 540M, DD 640Go 5400tpm) - Ubuntu 14.04
Nouveau PC portable : Toshiba SATELLITE S50t-A-117 (Intel i7 3630QM, 6Go RAM, nVidia GeForce GT 740M, DD 1To 5400tpm) - Ubuntu 14.10

Suivi régulier de Bumblebee (gestion de PC portables hybrides Intel/nvidia).

Hors ligne

#81 Le 26/04/2013, à 00:31

dark simpson

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonsoir !
N'ayant pas pu résister à faire la mise à niveau de ubuntu 13.04 smile , Ce dont je me suis douté est arrivé, bumblebee me renvoi le même message d'erreur que quand j'avais fait la précédente mise à niveau (12.04 -> 12.10) :

optirun glxsphere
[   84.427015] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.

[   84.427062] [ERROR]Aborting because fallback start is disabled.

ma carte (gtm 540 qui si je me souvient bien était source de problèmes) tourne en permanence et impossible de l'utiliser x)

Je ne me souviens plus comment je m'étais débrouillé avant (j'avais fait un tas de manip) mais là j'ai regardé les 15 dernière pages de l'ancienne discussion en vain hmm
Merci pour vos futures réponses !

Hors ligne

#82 Le 26/04/2013, à 08:13

GP974

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

la réponse est 2 page avant ce post tongue
voir ici


Ubunteros depuis 10.04 Restez libre avec Linux :)
Fixe : i7 i930@2.8ghz | 8go(1866Mhz) |Gtx 570@nvidia-340 | Samsung 840evo(120Go) | Ubuntu 12.04.4 & 14.04
Portable(asus N75SF) : i5 2410@2.3ghz | 8go(1333Mhz)  | IntelHD3000/GT555m@nvidia-340 | Vertex2(180go)| Arch & 12.04.4 & 14.10(dev)
Développeur de nvidiux

Hors ligne

#83 Le 26/04/2013, à 09:32

dark simpson

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Ben justement j'avais déjà effectué cet ajout dans ce fichier et ça me fait toujours le même message d'erreur hmm

Hors ligne

#84 Le 26/04/2013, à 14:08

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@dark simpson: Alors il faudrait un peu plus de logs, regarde ceux qu'on donné les autres. Faudra que j'ajoute ça quelque part, la liste des informations à fournir...

J'ai passé une bonne partie de la nuit à débugger la 3.2 avec Alexander Monakov (l'auteur de primus), on a fini par trouver le problème, même si on ne sait pas pourquoi il n'impacte pas nouveau et nvidia-319... On publiera bumblebee 3.2.1 dans la journée normalement.

Hors ligne

#85 Le 26/04/2013, à 14:31

dark simpson

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Oui désolé, voici mon xorg.0.log :

[    36.377] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    36.377] X Protocol Version 11, Revision 0
[    36.377] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    36.377] Current Operating System: Linux simpson-Aspire-5742G 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64
[    36.377] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=b895c20d-e761-49af-a93a-6a9c2dc2c56a ro quiet splash acpi_osi=Linux quiet splash acpi_osi=Linux i8042.nomux vt.handoff=7
[    36.377] Build Date: 17 April 2013  10:43:13PM
[    36.377] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
[    36.377] Current version of pixman: 0.28.2
[    36.377] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    36.377] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    36.377] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 26 15:19:00 2013
[    36.402] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    36.402] (==) No Layout section.  Using the first Screen section.
[    36.402] (==) No screen section available. Using defaults.
[    36.402] (**) |-->Screen "Default Screen Section" (0)
[    36.402] (**) |   |-->Monitor "<default monitor>"
[    36.403] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    36.403] (==) Automatically adding devices
[    36.403] (==) Automatically enabling devices
[    36.403] (==) Automatically adding GPU devices
[    36.403] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.403] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.403] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.403] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.403] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.436] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    36.436] 	Entry deleted from font path.
[    36.437] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    36.437] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    36.437] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    36.437] (II) Loader magic: 0x7fbc42e92d20
[    36.437] (II) Module ABI versions:
[    36.437] 	X.Org ANSI C Emulation: 0.4
[    36.437] 	X.Org Video Driver: 13.1
[    36.437] 	X.Org XInput driver : 18.0
[    36.437] 	X.Org Server Extension : 7.0
[    36.437] (II) config/udev: Adding drm device (/dev/dri/card0)
[    36.438] (--) PCI:*(0:0:2:0) 8086:0046:1025:0488 rev 2, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[    36.438] (--) PCI: (0:1:0:0) 10de:0df4:1025:0488 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    36.438] (II) Open ACPI successful (/var/run/acpid.socket)
[    36.438] Initializing built-in extension Generic Event Extension
[    36.438] Initializing built-in extension SHAPE
[    36.438] Initializing built-in extension MIT-SHM
[    36.438] Initializing built-in extension XInputExtension
[    36.438] Initializing built-in extension XTEST
[    36.438] Initializing built-in extension BIG-REQUESTS
[    36.438] Initializing built-in extension SYNC
[    36.438] Initializing built-in extension XKEYBOARD
[    36.438] Initializing built-in extension XC-MISC
[    36.438] Initializing built-in extension SECURITY
[    36.438] Initializing built-in extension XINERAMA
[    36.438] Initializing built-in extension XFIXES
[    36.438] Initializing built-in extension RENDER
[    36.438] Initializing built-in extension RANDR
[    36.438] Initializing built-in extension COMPOSITE
[    36.438] Initializing built-in extension DAMAGE
[    36.438] Initializing built-in extension MIT-SCREEN-SAVER
[    36.438] Initializing built-in extension DOUBLE-BUFFER
[    36.438] Initializing built-in extension RECORD
[    36.438] Initializing built-in extension DPMS
[    36.438] Initializing built-in extension X-Resource
[    36.438] Initializing built-in extension XVideo
[    36.438] Initializing built-in extension XVideo-MotionCompensation
[    36.438] Initializing built-in extension SELinux
[    36.438] Initializing built-in extension XFree86-VidModeExtension
[    36.438] Initializing built-in extension XFree86-DGA
[    36.438] Initializing built-in extension XFree86-DRI
[    36.438] Initializing built-in extension DRI2
[    36.438] (II) LoadModule: "glx"
[    36.526] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    36.526] (II) Module glx: vendor="X.Org Foundation"
[    36.526] 	compiled for 1.13.3, module version = 1.0.0
[    36.526] 	ABI class: X.Org Server Extension, version 7.0
[    36.526] (==) AIGLX enabled
[    36.526] Loading extension GLX
[    36.526] (==) Matched intel as autoconfigured driver 0
[    36.526] (==) Matched intel as autoconfigured driver 1
[    36.526] (==) Matched vesa as autoconfigured driver 2
[    36.526] (==) Matched modesetting as autoconfigured driver 3
[    36.526] (==) Matched fbdev as autoconfigured driver 4
[    36.526] (==) Assigned the driver to the xf86ConfigLayout
[    36.526] (II) LoadModule: "intel"
[    36.526] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    36.597] (II) Module intel: vendor="X.Org Foundation"
[    36.597] 	compiled for 1.13.3, module version = 2.21.6
[    36.597] 	Module class: X.Org Video Driver
[    36.597] 	ABI class: X.Org Video Driver, version 13.1
[    36.597] (II) LoadModule: "vesa"
[    36.597] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    36.597] (II) Module vesa: vendor="X.Org Foundation"
[    36.597] 	compiled for 1.12.99.902, module version = 2.3.2
[    36.597] 	Module class: X.Org Video Driver
[    36.597] 	ABI class: X.Org Video Driver, version 13.0
[    36.597] (II) LoadModule: "modesetting"
[    36.597] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    36.597] (II) Module modesetting: vendor="X.Org Foundation"
[    36.597] 	compiled for 1.13.3, module version = 0.7.0
[    36.597] 	Module class: X.Org Video Driver
[    36.597] 	ABI class: X.Org Video Driver, version 13.1
[    36.597] (II) LoadModule: "fbdev"
[    36.597] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    36.598] (II) Module fbdev: vendor="X.Org Foundation"
[    36.598] 	compiled for 1.12.99.902, module version = 0.4.3
[    36.598] 	Module class: X.Org Video Driver
[    36.598] 	ABI class: X.Org Video Driver, version 13.0
[    36.598] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    36.598] (II) VESA: driver for VESA chipsets: vesa
[    36.598] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    36.598] (II) FBDEV: driver for framebuffer: fbdev
[    36.598] (++) using VT number 7

[    36.598] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>)
[    36.599] (WW) Falling back to old probe method for vesa
[    36.599] (WW) Falling back to old probe method for modesetting
[    36.599] (WW) Falling back to old probe method for fbdev
[    36.599] (II) Loading sub module "fbdevhw"
[    36.599] (II) LoadModule: "fbdevhw"
[    36.599] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    36.599] (II) Module fbdevhw: vendor="X.Org Foundation"
[    36.599] 	compiled for 1.13.3, module version = 0.0.2
[    36.599] 	ABI class: X.Org Video Driver, version 13.1
[    36.599] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    36.599] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    36.599] (==) intel(0): RGB weight 888
[    36.599] (==) intel(0): Default visual is TrueColor
[    36.599] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[    36.600] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
[    36.600] (**) intel(0): Framebuffer tiled
[    36.600] (**) intel(0): Pixmaps tiled
[    36.600] (**) intel(0): "Tear free" disabled
[    36.600] (**) intel(0): Forcing per-crtc-pixmaps? no
[    36.600] (II) intel(0): Output LVDS1 has no monitor section
[    36.700] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[    36.716] (II) intel(0): Output VGA1 has no monitor section
[    36.732] (II) intel(0): Output HDMI1 has no monitor section
[    36.780] (II) intel(0): Output DP1 has no monitor section
[    36.780] (II) intel(0): EDID for output LVDS1
[    36.780] (II) intel(0): Manufacturer: AUO  Model: 26ec  Serial#: 0
[    36.780] (II) intel(0): Year: 2009  Week: 1
[    36.780] (II) intel(0): EDID Version: 1.3
[    36.780] (II) intel(0): Digital Display Input
[    36.780] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    36.780] (II) intel(0): Gamma: 2.20
[    36.780] (II) intel(0): No DPMS capabilities specified
[    36.780] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    36.780] (II) intel(0): First detailed timing is preferred mode
[    36.780] (II) intel(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[    36.780] (II) intel(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[    36.780] (II) intel(0): Manufacturer's mask: 0
[    36.780] (II) intel(0): Supported detailed timing:
[    36.780] (II) intel(0): clock: 71.8 MHz   Image Size:  344 x 193 mm
[    36.780] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    36.780] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 784 v_border: 0
[    36.780] (II) intel(0): Unknown vendor-specific block f
[    36.780] (II) intel(0):  AUO
[    36.780] (II) intel(0):  B156XW02 V6
[    36.780] (II) intel(0): EDID (in hex):
[    36.780] (II) intel(0): 	00ffffffffffff0006afec2600000000
[    36.780] (II) intel(0): 	01130103802213780ad7759355558d29
[    36.780] (II) intel(0): 	24505400000001010101010101010101
[    36.780] (II) intel(0): 	0101010101010c1c56a0500010303020
[    36.780] (II) intel(0): 	360058c1100000180000000f00000000
[    36.780] (II) intel(0): 	00000000000000000020000000fe0041
[    36.780] (II) intel(0): 	554f0a202020202020202020000000fe
[    36.780] (II) intel(0): 	004231353658573032205636200a0065
[    36.780] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    36.780] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    36.780] (II) intel(0): Printing probed modes for output LVDS1
[    36.780] (II) intel(0): Modeline "1366x768"x60.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    36.780] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    36.780] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    36.780] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    36.780] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    36.780] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    36.780] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    36.796] (II) intel(0): EDID for output VGA1
[    36.812] (II) intel(0): EDID for output HDMI1
[    36.860] (II) intel(0): EDID for output DP1
[    36.860] (II) intel(0): Output LVDS1 connected
[    36.860] (II) intel(0): Output VGA1 disconnected
[    36.860] (II) intel(0): Output HDMI1 disconnected
[    36.860] (II) intel(0): Output DP1 disconnected
[    36.860] (II) intel(0): Using exact sizes for initial modes
[    36.860] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    36.860] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    36.860] (==) intel(0): DPI set to (96, 96)
[    36.860] (II) Loading sub module "dri2"
[    36.860] (II) LoadModule: "dri2"
[    36.860] (II) Module "dri2" already built-in
[    36.860] (II) UnloadModule: "vesa"
[    36.860] (II) Unloading vesa
[    36.860] (II) UnloadModule: "modesetting"
[    36.860] (II) Unloading modesetting
[    36.860] (II) UnloadModule: "fbdev"
[    36.860] (II) Unloading fbdev
[    36.860] (II) UnloadSubModule: "fbdevhw"
[    36.860] (II) Unloading fbdevhw
[    36.860] (==) Depth 24 pixmap format is 32 bpp
[    36.860] (II) intel(0): SNA initialized with Ironlake backend
[    36.860] (==) intel(0): Backing store disabled
[    36.860] (==) intel(0): Silken mouse enabled
[    36.860] (II) intel(0): HW Cursor enabled
[    36.860] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    36.861] (==) intel(0): DPMS enabled
[    36.861] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    36.861] (II) intel(0): [DRI2] Setup complete
[    36.861] (II) intel(0): [DRI2]   DRI driver: i965
[    36.861] (II) intel(0): direct rendering: DRI2 Enabled
[    36.861] (==) intel(0): hotplug detection: "enabled"
[    36.861] (--) RandR disabled
[    36.867] (II) SELinux: Disabled on system
[    37.240] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    37.240] (II) AIGLX: enabled GLX_INTEL_swap_event
[    37.240] (II) AIGLX: enabled GLX_ARB_create_context
[    37.240] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    37.240] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    37.240] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    37.240] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    37.240] (II) AIGLX: Loaded and initialized i965
[    37.240] (II) GLX: Initialized DRI2 GL provider for screen 0
[    37.240] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[    37.264] (II) intel(0): Setting screen physical size to 361 x 203
[    37.294] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    37.297] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    37.297] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    37.297] (II) LoadModule: "evdev"
[    37.297] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    37.318] (II) Module evdev: vendor="X.Org Foundation"
[    37.318] 	compiled for 1.13.3, module version = 2.7.3
[    37.318] 	Module class: X.Org XInput Driver
[    37.318] 	ABI class: X.Org XInput driver, version 18.0
[    37.318] (II) Using input driver 'evdev' for 'Power Button'
[    37.318] (**) Power Button: always reports core events
[    37.318] (**) evdev: Power Button: Device: "/dev/input/event3"
[    37.318] (--) evdev: Power Button: Vendor 0 Product 0x1
[    37.318] (--) evdev: Power Button: Found keys
[    37.318] (II) evdev: Power Button: Configuring as keyboard
[    37.318] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    37.318] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    37.318] (**) Option "xkb_rules" "evdev"
[    37.318] (**) Option "xkb_model" "pc105"
[    37.318] (**) Option "xkb_layout" "fr"
[    37.318] (**) Option "xkb_variant" "latin9"
[    37.321] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[    37.321] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    37.321] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    37.321] (II) Using input driver 'evdev' for 'Video Bus'
[    37.321] (**) Video Bus: always reports core events
[    37.321] (**) evdev: Video Bus: Device: "/dev/input/event11"
[    37.322] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    37.322] (--) evdev: Video Bus: Found keys
[    37.322] (II) evdev: Video Bus: Configuring as keyboard
[    37.322] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[    37.322] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    37.322] (**) Option "xkb_rules" "evdev"
[    37.322] (**) Option "xkb_model" "pc105"
[    37.322] (**) Option "xkb_layout" "fr"
[    37.322] (**) Option "xkb_variant" "latin9"
[    37.322] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    37.322] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    37.322] (II) Using input driver 'evdev' for 'Video Bus'
[    37.322] (**) Video Bus: always reports core events
[    37.322] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    37.322] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    37.322] (--) evdev: Video Bus: Found keys
[    37.322] (II) evdev: Video Bus: Configuring as keyboard
[    37.322] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input12/event12"
[    37.322] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    37.322] (**) Option "xkb_rules" "evdev"
[    37.322] (**) Option "xkb_model" "pc105"
[    37.322] (**) Option "xkb_layout" "fr"
[    37.322] (**) Option "xkb_variant" "latin9"
[    37.323] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    37.323] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    37.323] (II) Using input driver 'evdev' for 'Power Button'
[    37.323] (**) Power Button: always reports core events
[    37.323] (**) evdev: Power Button: Device: "/dev/input/event0"
[    37.323] (--) evdev: Power Button: Vendor 0 Product 0x1
[    37.323] (--) evdev: Power Button: Found keys
[    37.323] (II) evdev: Power Button: Configuring as keyboard
[    37.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/PNP0C0C:00/input/input0/event0"
[    37.323] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    37.323] (**) Option "xkb_rules" "evdev"
[    37.323] (**) Option "xkb_model" "pc105"
[    37.323] (**) Option "xkb_layout" "fr"
[    37.323] (**) Option "xkb_variant" "latin9"
[    37.323] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    37.323] (II) No input driver specified, ignoring this device.
[    37.323] (II) This device may have been added with another device file.
[    37.323] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    37.323] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    37.323] (II) Using input driver 'evdev' for 'Sleep Button'
[    37.323] (**) Sleep Button: always reports core events
[    37.324] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    37.324] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    37.324] (--) evdev: Sleep Button: Found keys
[    37.324] (II) evdev: Sleep Button: Configuring as keyboard
[    37.324] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/PNP0C0E:00/input/input2/event2"
[    37.324] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    37.324] (**) Option "xkb_rules" "evdev"
[    37.324] (**) Option "xkb_model" "pc105"
[    37.324] (**) Option "xkb_layout" "fr"
[    37.324] (**) Option "xkb_variant" "latin9"
[    37.324] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    37.324] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    37.324] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event9)
[    37.324] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[    37.324] (II) Using input driver 'evdev' for '1.3M WebCam'
[    37.324] (**) 1.3M WebCam: always reports core events
[    37.324] (**) evdev: 1.3M WebCam: Device: "/dev/input/event9"
[    37.324] (--) evdev: 1.3M WebCam: Vendor 0x402 Product 0x9665
[    37.324] (--) evdev: 1.3M WebCam: Found keys
[    37.324] (II) evdev: 1.3M WebCam: Configuring as keyboard
[    37.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9/event9"
[    37.324] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 11)
[    37.324] (**) Option "xkb_rules" "evdev"
[    37.324] (**) Option "xkb_model" "pc105"
[    37.324] (**) Option "xkb_layout" "fr"
[    37.324] (**) Option "xkb_variant" "latin9"
[    37.325] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event13)
[    37.325] (II) No input driver specified, ignoring this device.
[    37.325] (II) This device may have been added with another device file.
[    37.325] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event14)
[    37.325] (II) No input driver specified, ignoring this device.
[    37.325] (II) This device may have been added with another device file.
[    37.325] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event15)
[    37.325] (II) No input driver specified, ignoring this device.
[    37.325] (II) This device may have been added with another device file.
[    37.326] (II) config/udev: Adding input device GiGa HiD (/dev/input/event5)
[    37.326] (**) GiGa HiD: Applying InputClass "evdev keyboard catchall"
[    37.326] (II) Using input driver 'evdev' for 'GiGa HiD'
[    37.326] (**) GiGa HiD: always reports core events
[    37.326] (**) evdev: GiGa HiD: Device: "/dev/input/event5"
[    37.326] (--) evdev: GiGa HiD: Vendor 0x40b Product 0x2013
[    37.326] (--) evdev: GiGa HiD: Found keys
[    37.326] (II) evdev: GiGa HiD: Configuring as keyboard
[    37.326] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5/event5"
[    37.326] (II) XINPUT: Adding extended input device "GiGa HiD" (type: KEYBOARD, id 12)
[    37.326] (**) Option "xkb_rules" "evdev"
[    37.326] (**) Option "xkb_model" "pc105"
[    37.326] (**) Option "xkb_layout" "fr"
[    37.326] (**) Option "xkb_variant" "latin9"
[    37.326] (II) config/udev: Adding input device GiGa HiD (/dev/input/event6)
[    37.326] (**) GiGa HiD: Applying InputClass "evdev pointer catchall"
[    37.326] (**) GiGa HiD: Applying InputClass "evdev keyboard catchall"
[    37.326] (II) Using input driver 'evdev' for 'GiGa HiD'
[    37.326] (**) GiGa HiD: always reports core events
[    37.326] (**) evdev: GiGa HiD: Device: "/dev/input/event6"
[    37.326] (--) evdev: GiGa HiD: Vendor 0x40b Product 0x2013
[    37.326] (--) evdev: GiGa HiD: Found 12 mouse buttons
[    37.326] (--) evdev: GiGa HiD: Found scroll wheel(s)
[    37.326] (--) evdev: GiGa HiD: Found relative axes
[    37.326] (--) evdev: GiGa HiD: Found x and y relative axes
[    37.326] (--) evdev: GiGa HiD: Found absolute axes
[    37.326] (II) evdev: GiGa HiD: Forcing absolute x/y axes to exist.
[    37.326] (--) evdev: GiGa HiD: Found keys
[    37.326] (II) evdev: GiGa HiD: Configuring as mouse
[    37.326] (II) evdev: GiGa HiD: Configuring as keyboard
[    37.326] (II) evdev: GiGa HiD: Adding scrollwheel support
[    37.326] (**) evdev: GiGa HiD: YAxisMapping: buttons 4 and 5
[    37.327] (**) evdev: GiGa HiD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    37.327] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input6/event6"
[    37.327] (II) XINPUT: Adding extended input device "GiGa HiD" (type: KEYBOARD, id 13)
[    37.327] (**) Option "xkb_rules" "evdev"
[    37.327] (**) Option "xkb_model" "pc105"
[    37.327] (**) Option "xkb_layout" "fr"
[    37.327] (**) Option "xkb_variant" "latin9"
[    37.327] (II) evdev: GiGa HiD: initialized for relative axes.
[    37.327] (WW) evdev: GiGa HiD: ignoring absolute axes.
[    37.327] (**) GiGa HiD: (accel) keeping acceleration scheme 1
[    37.327] (**) GiGa HiD: (accel) acceleration profile 0
[    37.327] (**) GiGa HiD: (accel) acceleration factor: 2.000
[    37.327] (**) GiGa HiD: (accel) acceleration threshold: 4
[    37.327] (II) config/udev: Adding input device GiGa HiD (/dev/input/mouse0)
[    37.327] (II) No input driver specified, ignoring this device.
[    37.327] (II) This device may have been added with another device file.
[    37.328] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    37.328] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    37.328] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    37.328] (**) AT Translated Set 2 keyboard: always reports core events
[    37.328] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    37.328] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    37.328] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    37.328] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    37.328] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    37.328] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    37.328] (**) Option "xkb_rules" "evdev"
[    37.328] (**) Option "xkb_model" "pc105"
[    37.328] (**) Option "xkb_layout" "fr"
[    37.328] (**) Option "xkb_variant" "latin9"
[    37.328] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[    37.328] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    37.328] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    37.328] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    37.328] (II) LoadModule: "synaptics"
[    37.328] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    37.329] (II) Module synaptics: vendor="X.Org Foundation"
[    37.329] 	compiled for 1.13.1.901, module version = 1.6.2
[    37.329] 	Module class: X.Org XInput Driver
[    37.329] 	ABI class: X.Org XInput driver, version 18.0
[    37.329] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    37.329] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    37.329] (**) Option "Device" "/dev/input/event10"
[    37.332] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    37.332] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[    37.332] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[    37.332] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    37.332] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    37.332] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    37.332] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    37.332] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    37.332] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    37.344] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[    37.344] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[    37.344] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    37.344] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    37.344] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[    37.344] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    37.344] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    37.344] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    37.345] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    37.345] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    37.345] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    37.345] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    37.347] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event7)
[    37.347] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    37.347] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[    37.347] (**) Acer WMI hotkeys: always reports core events
[    37.347] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event7"
[    37.347] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[    37.347] (--) evdev: Acer WMI hotkeys: Found keys
[    37.347] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[    37.347] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[    37.347] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 16)
[    37.347] (**) Option "xkb_rules" "evdev"
[    37.347] (**) Option "xkb_model" "pc105"
[    37.347] (**) Option "xkb_layout" "fr"
[    37.347] (**) Option "xkb_variant" "latin9"
[    37.348] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event8)
[    37.348] (II) No input driver specified, ignoring this device.
[    37.348] (II) This device may have been added with another device file.
[    37.348] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[    37.348] (II) No input driver specified, ignoring this device.
[    37.348] (II) This device may have been added with another device file.
[    40.582] (II) intel(0): EDID vendor "AUO", prod id 9964
[    40.582] (II) intel(0): Printing DDC gathered Modelines:
[    40.582] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    43.067] (II) intel(0): EDID vendor "AUO", prod id 9964
[    43.067] (II) intel(0): Printing DDC gathered Modelines:
[    43.067] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    47.484] (II) intel(0): EDID vendor "AUO", prod id 9964
[    47.484] (II) intel(0): Printing DDC gathered Modelines:
[    47.484] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    48.606] (II) intel(0): EDID vendor "AUO", prod id 9964
[    48.606] (II) intel(0): Printing DDC gathered Modelines:
[    48.606] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    48.707] (II) intel(0): EDID vendor "AUO", prod id 9964
[    48.707] (II) intel(0): Printing DDC gathered Modelines:
[    48.707] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    48.998] (II) intel(0): EDID vendor "AUO", prod id 9964
[    48.998] (II) intel(0): Printing DDC gathered Modelines:
[    48.998] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    52.168] (II) intel(0): EDID vendor "AUO", prod id 9964
[    52.168] (II) intel(0): Printing DDC gathered Modelines:
[    52.168] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    54.306] (II) XKB: reuse xkmfile /var/lib/xkb/server-C814AC61323ADD9F3C69F18721C056518480B483.xkm
[    68.594] (II) intel(0): EDID vendor "AUO", prod id 9964
[    68.594] (II) intel(0): Printing DDC gathered Modelines:
[    68.594] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)

mon xorg.8.log :

[    78.436] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    78.436] X Protocol Version 11, Revision 0
[    78.436] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    78.436] Current Operating System: Linux simpson-Aspire-5742G 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64
[    78.436] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=b895c20d-e761-49af-a93a-6a9c2dc2c56a ro quiet splash acpi_osi=Linux quiet splash acpi_osi=Linux i8042.nomux vt.handoff=7
[    78.436] Build Date: 17 April 2013  10:43:13PM
[    78.436] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
[    78.436] Current version of pixman: 0.28.2
[    78.436] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    78.436] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    78.436] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Apr 26 15:19:42 2013
[    78.436] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[    78.436] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    78.469] (==) ServerLayout "Layout0"
[    78.469] (==) No screen section available. Using defaults.
[    78.469] (**) |-->Screen "Default Screen Section" (0)
[    78.469] (**) |   |-->Monitor "<default monitor>"
[    78.469] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    78.469] (**) |   |-->Device "Device1"
[    78.469] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    78.469] (**) Option "AutoAddDevices" "false"
[    78.469] (**) Not automatically adding devices
[    78.469] (==) Automatically enabling devices
[    78.469] (==) Automatically adding GPU devices
[    78.469] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.469] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.469] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.469] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.469] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.470] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    78.470] 	Entry deleted from font path.
[    78.470] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    78.470] (++) ModulePath set to "/usr/lib/nvidia-304/xorg,/usr/lib/xorg/modules"
[    78.470] (==) |-->Input Device "<default pointer>"
[    78.470] (==) |-->Input Device "<default keyboard>"
[    78.470] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[    78.470] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[    78.470] (II) Loader magic: 0x7f8f3436dd20
[    78.470] (II) Module ABI versions:
[    78.470] 	X.Org ANSI C Emulation: 0.4
[    78.470] 	X.Org Video Driver: 13.1
[    78.470] 	X.Org XInput driver : 18.0
[    78.470] 	X.Org Server Extension : 7.0
[    78.470] (II) config/udev: Adding drm device (/dev/dri/card0)
[    78.471] (--) PCI: (0:1:0:0) 10de:0df4:1025:0488 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    78.471] (II) Open ACPI successful (/var/run/acpid.socket)
[    78.471] Initializing built-in extension Generic Event Extension
[    78.471] Initializing built-in extension SHAPE
[    78.471] Initializing built-in extension MIT-SHM
[    78.471] Initializing built-in extension XInputExtension
[    78.471] Initializing built-in extension XTEST
[    78.471] Initializing built-in extension BIG-REQUESTS
[    78.471] Initializing built-in extension SYNC
[    78.471] Initializing built-in extension XKEYBOARD
[    78.471] Initializing built-in extension XC-MISC
[    78.471] Initializing built-in extension SECURITY
[    78.471] Initializing built-in extension XINERAMA
[    78.472] Initializing built-in extension XFIXES
[    78.472] Initializing built-in extension RENDER
[    78.472] Initializing built-in extension RANDR
[    78.472] Initializing built-in extension COMPOSITE
[    78.472] Initializing built-in extension DAMAGE
[    78.472] Initializing built-in extension MIT-SCREEN-SAVER
[    78.472] Initializing built-in extension DOUBLE-BUFFER
[    78.472] Initializing built-in extension RECORD
[    78.472] Initializing built-in extension DPMS
[    78.472] Initializing built-in extension X-Resource
[    78.472] Initializing built-in extension XVideo
[    78.472] Initializing built-in extension XVideo-MotionCompensation
[    78.472] Initializing built-in extension SELinux
[    78.472] Initializing built-in extension XFree86-VidModeExtension
[    78.472] Initializing built-in extension XFree86-DGA
[    78.472] Initializing built-in extension XFree86-DRI
[    78.472] Initializing built-in extension DRI2
[    78.472] (II) LoadModule: "glx"
[    78.472] (II) Loading /usr/lib/nvidia-304/xorg/libglx.so
[    83.062] (II) Module glx: vendor="NVIDIA Corporation"
[    83.062] 	compiled for 4.0.2, module version = 1.0.0
[    83.062] 	Module class: X.Org Server Extension
[    83.062] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:46:57 PDT 2013
[    83.062] Loading extension GLX
[    83.062] (II) LoadModule: "nvidia"
[    83.062] (II) Loading /usr/lib/nvidia-304/xorg/nvidia_drv.so
[    83.718] (II) Module nvidia: vendor="NVIDIA Corporation"
[    83.718] 	compiled for 4.0.2, module version = 1.0.0
[    83.718] 	Module class: X.Org Video Driver
[    83.868] (II) LoadModule: "mouse"
[    83.868] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    83.917] (II) Module mouse: vendor="X.Org Foundation"
[    83.917] 	compiled for 1.13.0, module version = 1.7.2
[    83.917] 	Module class: X.Org XInput Driver
[    83.917] 	ABI class: X.Org XInput driver, version 18.0
[    83.917] (II) LoadModule: "kbd"
[    83.918] (WW) Warning, couldn't open module kbd
[    83.918] (II) UnloadModule: "kbd"
[    83.918] (II) Unloading kbd
[    83.918] (EE) Failed to load module "kbd" (module does not exist, 0)
[    83.918] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:28:14 PDT 2013
[    83.918] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    83.934] (--) using VT number 7

[    83.934] (EE) No devices detected.
[    83.934] (==) Matched intel as autoconfigured driver 0
[    83.934] (==) Matched intel as autoconfigured driver 1
[    83.934] (==) Matched vesa as autoconfigured driver 2
[    83.934] (==) Matched modesetting as autoconfigured driver 3
[    83.934] (==) Matched fbdev as autoconfigured driver 4
[    83.934] (==) Assigned the driver to the xf86ConfigLayout
[    83.934] (II) LoadModule: "intel"
[    83.934] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    83.934] (II) Module intel: vendor="X.Org Foundation"
[    83.934] 	compiled for 1.13.3, module version = 2.21.6
[    83.934] 	Module class: X.Org Video Driver
[    83.934] 	ABI class: X.Org Video Driver, version 13.1
[    83.934] (II) LoadModule: "vesa"
[    83.934] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    83.935] (II) Module vesa: vendor="X.Org Foundation"
[    83.935] 	compiled for 1.12.99.902, module version = 2.3.2
[    83.935] 	Module class: X.Org Video Driver
[    83.935] 	ABI class: X.Org Video Driver, version 13.0
[    83.935] (II) LoadModule: "modesetting"
[    83.935] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    83.935] (II) Module modesetting: vendor="X.Org Foundation"
[    83.935] 	compiled for 1.13.3, module version = 0.7.0
[    83.935] 	Module class: X.Org Video Driver
[    83.935] 	ABI class: X.Org Video Driver, version 13.1
[    83.935] (II) LoadModule: "fbdev"
[    83.935] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    83.935] (II) Module fbdev: vendor="X.Org Foundation"
[    83.935] 	compiled for 1.12.99.902, module version = 0.4.3
[    83.935] 	Module class: X.Org Video Driver
[    83.935] 	ABI class: X.Org Video Driver, version 13.0
[    83.935] (II) LoadModule: "mouse"
[    83.935] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    83.935] (II) Module mouse: vendor="X.Org Foundation"
[    83.935] 	compiled for 1.13.0, module version = 1.7.2
[    83.935] 	Module class: X.Org XInput Driver
[    83.935] 	ABI class: X.Org XInput driver, version 18.0
[    83.935] (II) LoadModule: "kbd"
[    83.936] (WW) Warning, couldn't open module kbd
[    83.936] (II) UnloadModule: "kbd"
[    83.936] (II) Unloading kbd
[    83.936] (EE) Failed to load module "kbd" (module does not exist, 0)
[    83.936] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:28:14 PDT 2013
[    83.936] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    83.936] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    83.936] (II) VESA: driver for VESA chipsets: vesa
[    83.936] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    83.936] (II) FBDEV: driver for framebuffer: fbdev
[    83.936] (++) using VT number 7

[    83.936] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    83.936] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[    83.936] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>)
[    83.937] (WW) Falling back to old probe method for vesa
[    83.937] (WW) Falling back to old probe method for modesetting
[    83.937] (WW) Falling back to old probe method for fbdev
[    83.937] (II) Loading sub module "fbdevhw"
[    83.937] (II) LoadModule: "fbdevhw"
[    83.937] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    83.937] (II) Module fbdevhw: vendor="X.Org Foundation"
[    83.937] 	compiled for 1.13.3, module version = 0.0.2
[    83.937] 	ABI class: X.Org Video Driver, version 13.1
[    83.937] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].
[    83.937] (EE) intel(0): Failed to become DRM master.
[    83.937] (II) UnloadModule: "intel"
[    83.937] (EE) Screen(s) found, but none have a usable configuration.
[    83.937] 
Fatal server error:
[    83.937] no screens found
[    83.937] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    83.937] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[    83.937] (EE) 
[    83.938] Server terminated with error (1). Closing log file.

mon xorgfailsafe :

[    78.436] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    78.436] X Protocol Version 11, Revision 0
[    78.436] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    78.436] Current Operating System: Linux simpson-Aspire-5742G 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64
[    78.436] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=b895c20d-e761-49af-a93a-6a9c2dc2c56a ro quiet splash acpi_osi=Linux quiet splash acpi_osi=Linux i8042.nomux vt.handoff=7
[    78.436] Build Date: 17 April 2013  10:43:13PM
[    78.436] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
[    78.436] Current version of pixman: 0.28.2
[    78.436] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    78.436] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    78.436] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Apr 26 15:19:42 2013
[    78.436] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[    78.436] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    78.469] (==) ServerLayout "Layout0"
[    78.469] (==) No screen section available. Using defaults.
[    78.469] (**) |-->Screen "Default Screen Section" (0)
[    78.469] (**) |   |-->Monitor "<default monitor>"
[    78.469] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    78.469] (**) |   |-->Device "Device1"
[    78.469] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    78.469] (**) Option "AutoAddDevices" "false"
[    78.469] (**) Not automatically adding devices
[    78.469] (==) Automatically enabling devices
[    78.469] (==) Automatically adding GPU devices
[    78.469] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.469] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.469] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.469] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.469] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    78.469] 	Entry deleted from font path.
[    78.470] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    78.470] 	Entry deleted from font path.
[    78.470] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    78.470] (++) ModulePath set to "/usr/lib/nvidia-304/xorg,/usr/lib/xorg/modules"
[    78.470] (==) |-->Input Device "<default pointer>"
[    78.470] (==) |-->Input Device "<default keyboard>"
[    78.470] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[    78.470] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[    78.470] (II) Loader magic: 0x7f8f3436dd20
[    78.470] (II) Module ABI versions:
[    78.470] 	X.Org ANSI C Emulation: 0.4
[    78.470] 	X.Org Video Driver: 13.1
[    78.470] 	X.Org XInput driver : 18.0
[    78.470] 	X.Org Server Extension : 7.0
[    78.470] (II) config/udev: Adding drm device (/dev/dri/card0)
[    78.471] (--) PCI: (0:1:0:0) 10de:0df4:1025:0488 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    78.471] (II) Open ACPI successful (/var/run/acpid.socket)
[    78.471] Initializing built-in extension Generic Event Extension
[    78.471] Initializing built-in extension SHAPE
[    78.471] Initializing built-in extension MIT-SHM
[    78.471] Initializing built-in extension XInputExtension
[    78.471] Initializing built-in extension XTEST
[    78.471] Initializing built-in extension BIG-REQUESTS
[    78.471] Initializing built-in extension SYNC
[    78.471] Initializing built-in extension XKEYBOARD
[    78.471] Initializing built-in extension XC-MISC
[    78.471] Initializing built-in extension SECURITY
[    78.471] Initializing built-in extension XINERAMA
[    78.472] Initializing built-in extension XFIXES
[    78.472] Initializing built-in extension RENDER
[    78.472] Initializing built-in extension RANDR
[    78.472] Initializing built-in extension COMPOSITE
[    78.472] Initializing built-in extension DAMAGE
[    78.472] Initializing built-in extension MIT-SCREEN-SAVER
[    78.472] Initializing built-in extension DOUBLE-BUFFER
[    78.472] Initializing built-in extension RECORD
[    78.472] Initializing built-in extension DPMS
[    78.472] Initializing built-in extension X-Resource
[    78.472] Initializing built-in extension XVideo
[    78.472] Initializing built-in extension XVideo-MotionCompensation
[    78.472] Initializing built-in extension SELinux
[    78.472] Initializing built-in extension XFree86-VidModeExtension
[    78.472] Initializing built-in extension XFree86-DGA
[    78.472] Initializing built-in extension XFree86-DRI
[    78.472] Initializing built-in extension DRI2
[    78.472] (II) LoadModule: "glx"
[    78.472] (II) Loading /usr/lib/nvidia-304/xorg/libglx.so
[    83.062] (II) Module glx: vendor="NVIDIA Corporation"
[    83.062] 	compiled for 4.0.2, module version = 1.0.0
[    83.062] 	Module class: X.Org Server Extension
[    83.062] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:46:57 PDT 2013
[    83.062] Loading extension GLX
[    83.062] (II) LoadModule: "nvidia"
[    83.062] (II) Loading /usr/lib/nvidia-304/xorg/nvidia_drv.so
[    83.718] (II) Module nvidia: vendor="NVIDIA Corporation"
[    83.718] 	compiled for 4.0.2, module version = 1.0.0
[    83.718] 	Module class: X.Org Video Driver
[    83.868] (II) LoadModule: "mouse"
[    83.868] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    83.917] (II) Module mouse: vendor="X.Org Foundation"
[    83.917] 	compiled for 1.13.0, module version = 1.7.2
[    83.917] 	Module class: X.Org XInput Driver
[    83.917] 	ABI class: X.Org XInput driver, version 18.0
[    83.917] (II) LoadModule: "kbd"
[    83.918] (WW) Warning, couldn't open module kbd
[    83.918] (II) UnloadModule: "kbd"
[    83.918] (II) Unloading kbd
[    83.918] (EE) Failed to load module "kbd" (module does not exist, 0)
[    83.918] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:28:14 PDT 2013
[    83.918] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    83.934] (--) using VT number 7

[    83.934] (EE) No devices detected.
[    83.934] (==) Matched intel as autoconfigured driver 0
[    83.934] (==) Matched intel as autoconfigured driver 1
[    83.934] (==) Matched vesa as autoconfigured driver 2
[    83.934] (==) Matched modesetting as autoconfigured driver 3
[    83.934] (==) Matched fbdev as autoconfigured driver 4
[    83.934] (==) Assigned the driver to the xf86ConfigLayout
[    83.934] (II) LoadModule: "intel"
[    83.934] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    83.934] (II) Module intel: vendor="X.Org Foundation"
[    83.934] 	compiled for 1.13.3, module version = 2.21.6
[    83.934] 	Module class: X.Org Video Driver
[    83.934] 	ABI class: X.Org Video Driver, version 13.1
[    83.934] (II) LoadModule: "vesa"
[    83.934] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    83.935] (II) Module vesa: vendor="X.Org Foundation"
[    83.935] 	compiled for 1.12.99.902, module version = 2.3.2
[    83.935] 	Module class: X.Org Video Driver
[    83.935] 	ABI class: X.Org Video Driver, version 13.0
[    83.935] (II) LoadModule: "modesetting"
[    83.935] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    83.935] (II) Module modesetting: vendor="X.Org Foundation"
[    83.935] 	compiled for 1.13.3, module version = 0.7.0
[    83.935] 	Module class: X.Org Video Driver
[    83.935] 	ABI class: X.Org Video Driver, version 13.1
[    83.935] (II) LoadModule: "fbdev"
[    83.935] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    83.935] (II) Module fbdev: vendor="X.Org Foundation"
[    83.935] 	compiled for 1.12.99.902, module version = 0.4.3
[    83.935] 	Module class: X.Org Video Driver
[    83.935] 	ABI class: X.Org Video Driver, version 13.0
[    83.935] (II) LoadModule: "mouse"
[    83.935] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    83.935] (II) Module mouse: vendor="X.Org Foundation"
[    83.935] 	compiled for 1.13.0, module version = 1.7.2
[    83.935] 	Module class: X.Org XInput Driver
[    83.935] 	ABI class: X.Org XInput driver, version 18.0
[    83.935] (II) LoadModule: "kbd"
[    83.936] (WW) Warning, couldn't open module kbd
[    83.936] (II) UnloadModule: "kbd"
[    83.936] (II) Unloading kbd
[    83.936] (EE) Failed to load module "kbd" (module does not exist, 0)
[    83.936] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:28:14 PDT 2013
[    83.936] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    83.936] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    83.936] (II) VESA: driver for VESA chipsets: vesa
[    83.936] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    83.936] (II) FBDEV: driver for framebuffer: fbdev
[    83.936] (++) using VT number 7

[    83.936] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    83.936] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[    83.936] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>)
[    83.937] (WW) Falling back to old probe method for vesa
[    83.937] (WW) Falling back to old probe method for modesetting
[    83.937] (WW) Falling back to old probe method for fbdev
[    83.937] (II) Loading sub module "fbdevhw"
[    83.937] (II) LoadModule: "fbdevhw"
[    83.937] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    83.937] (II) Module fbdevhw: vendor="X.Org Foundation"
[    83.937] 	compiled for 1.13.3, module version = 0.0.2
[    83.937] 	ABI class: X.Org Video Driver, version 13.1
[    83.937] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].
[    83.937] (EE) intel(0): Failed to become DRM master.
[    83.937] (II) UnloadModule: "intel"
[    83.937] (EE) Screen(s) found, but none have a usable configuration.
[    83.937] 
Fatal server error:
[    83.937] no screens found
[    83.937] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    83.937] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[    83.937] (EE) 
[    83.938] Server terminated with error (1). Closing log file.

mon bumblebee.conf

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia

PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

et mon xorg.nvidia.conf :

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia

PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

En espérant que je n'oubli rien, je ne suis pas hyper expert donc s'il manque un truc donnez moi la racine du fichier svp x)

Hors ligne

#86 Le 26/04/2013, à 14:35

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Tu donnes deux fois le même fichier à la fin, pour le dernier je voudrais /etc/bumblebee/xorg.conf.nvidia, car clairement d'après Xorg.8.log, c'est là que semble être le problème.

Hors ligne

#87 Le 26/04/2013, à 14:38

dark simpson

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

oups désolé :
Je précise quand même que j'ai bidouillé ce truc : "#   BusID "PCI:01:00:0"" que j'ai essayé de le mettre sans le #   BusID "PCI:02:00:0" et avec mais que au final ça ne fonctionnait pas non plus hmm

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
EndSection

Section "Device"
    Identifier  "Device1"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | grep VGA` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device).
#   BusID "PCI:01:00:0"
#   BusID "PCI:02:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    Option "ConnectedMonitor" "DFP"
EndSection

Hors ligne

#88 Le 26/04/2013, à 14:40

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bon hé bien tu retires le # devant BusID "PCI:01:00:0", et ça devrait marcher.

Hors ligne

#89 Le 26/04/2013, à 14:45

dark simpson

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Yes ça marche ! J'avais pas du tout pensé que # mettait en commentaire ^^'
Merci ArchangeGabriel ! smile

Hors ligne

#90 Le 27/04/2013, à 00:32

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bumblebee 3.2.1 et une nouvelle version de primus sont sur le PPA.

Hors ligne

#91 Le 27/04/2013, à 10:49

cdjklm

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

tout marche impec big_smile merci pour ce beau boulot


Benq joybook lite Xubuntu 12.04  32bits , intel N270 1.66GHz x 2 , 945 GMA intégré 256 MO , 2GO Ram , HDD 250 GO , WIFI ,BLUETOOTH,modem 3G MC8775  intégré.

Hors ligne

#92 Le 28/04/2013, à 12:17

Ph3nix_

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,

J'ai un petit problème avec bumblebee >>http://forum.ubuntu-fr.org/viewtopic.ph … #p13354641,
merci de jeter un oeuil smile


Hiroshima 45 / Chernobyl 86 / Windows '95

Hors ligne

#93 Le 28/04/2013, à 12:50

cdjklm

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

heu petite question ,aprés la mise à jour bumblebee semblait utiliser le 304 alors que le 310 était dejas installé ,après le changement dans bumblebee.conf il prend désormais le 310 mais me semblait il on était rendu au 313 non?


Benq joybook lite Xubuntu 12.04  32bits , intel N270 1.66GHz x 2 , 945 GMA intégré 256 MO , 2GO Ram , HDD 250 GO , WIFI ,BLUETOOTH,modem 3G MC8775  intégré.

Hors ligne

#94 Le 28/04/2013, à 13:14

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Sont disponible dans les dépôts : 304, 310, 313. Et 319 avec xorg-edgers. Par défaut, si aucun pilote n'est installé il va chercher le 304. Mais il est toujours possible d'en installer un plus récent après.

@Ph3nix_ : Répondu sur ton topic.

Dernière modification par ArchangeGabriel (Le 28/04/2013, à 13:15)

Hors ligne

#95 Le 29/04/2013, à 12:57

ZeX

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Me revoilà !

Alors voici mes logs (je rappelle que je suis sur Debian !)

Merci par avance pour ce boulot monstre et ta disponibilité smile

zex@debian:~$ optirun -vv glxinfo
[138749.821966] [DEBUG]Reading file: /usr/local/etc/bumblebee/bumblebee.conf
[138749.849910] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[138749.849941] [DEBUG]Socket closed.
[138749.849953] [ERROR]Could not connect to bumblebee daemon - is it running?
zex@debian:~$ bumblebeed
bash: bumblebeed : commande introuvable
zex@debian:~$ optirun -vv glxinfo
[138908.619236] [DEBUG]Reading file: /usr/local/etc/bumblebee/bumblebee.conf
[138908.620340] [DEBUG]optirun version 3.0.1 starting...
[138908.620402] [DEBUG]Active configuration:
[138908.620429] [DEBUG] bumblebeed config file: /usr/local/etc/bumblebee/bumblebee.conf
[138908.620484] [DEBUG] X display: :8
[138908.620520] [DEBUG] LD_LIBRARY_PATH: 
[138908.620567] [DEBUG] Socket path: /var/run/bumblebee.socket
[138908.620598] [DEBUG] VGL Compression: proxy
[138911.267242] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[138911.267291] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[138911.267311] [DEBUG]Socket closed.
[138911.267354] [ERROR]Aborting because fallback start is disabled.
[138911.267394] [DEBUG]Killing all remaining processes.

Le Xorg.0.log :

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
Current Operating System: Linux debian 3.2.0-0.bpo.4-amd64 #1 SMP Debian 3.2.32-1~bpo60+1 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.4-amd64 root=UUID=b7dd488e-e6b8-43e4-9c97-03635fa0528c ro quiet
Build Date: 29 October 2011  06:58:14PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 23 10:02:02 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:0126:1043:1682 Intel Corporation Sandy Bridge Integrated Graphics Controller rev 9, Mem @ 0xdd400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  195.36.31  Thu Jun  3 08:59:25 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 2.13.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 2.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 0.4.2
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 0.0.2
	ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge
(--) intel(0): Chipset: "Sandybridge"
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait disabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output LVDS1 using monitor section Configured Monitor
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: CMO  Model: 1721  Serial#: 0
(II) intel(0): Year: 2009  Week: 5
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 39  vert.: 22
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.617 redY: 0.336   greenX: 0.321 greenY: 0.596
(II) intel(0): blueX: 0.160 blueY: 0.081   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 97.8 MHz   Image Size:  382 x 215 mm
(II) intel(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1760 h_border: 0
(II) intel(0): v_active: 900  v_sync: 903  v_sync_end 908 v_blanking: 926 v_border: 0
(II) intel(0):  N173FGE-L21
(II) intel(0):  CMO
(II) intel(0):  N173FGE-L21
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff000daf211700000000
(II) intel(0): 	05130103802716780a06359e56529829
(II) intel(0): 	14505400000001010101010101010101
(II) intel(0): 	0101010101012f2640a060841a303020
(II) intel(0): 	35007ed710000018000000fe004e3137
(II) intel(0): 	334647452d4c32310a20000000fe0043
(II) intel(0): 	4d4f0a202020202020202020000000fe
(II) intel(0): 	004e3137334647452d4c32310a2000c3
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1600x900"x60.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
(II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1600x900
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(**) intel(0): Display dimensions: (390, 220) mm
(**) intel(0): DPI set to (104, 103)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(II)         put_image
(II)         get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] i965_xvmc driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(II) intel(0): Setting screen physical size to 423 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Video Bus (/dev/input/event10)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event10"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Video Bus (/dev/input/event9)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event5)
(**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
(**) USB 2.0 UVC VGA WebCam: always reports core events
(**) USB 2.0 UVC VGA WebCam: Device: "/dev/input/event5"
(II) USB 2.0 UVC VGA WebCam: Found keys
(II) USB 2.0 UVC VGA WebCam: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event8)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event8"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event6)
(**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
(**) Asus WMI hotkeys: always reports core events
(**) Asus WMI hotkeys: Device: "/dev/input/event6"
(II) Asus WMI hotkeys: Found keys
(II) Asus WMI hotkeys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event7"
(II) ETPS/2 Elantech Touchpad: x-axis range 0 - 2508
(II) ETPS/2 Elantech Touchpad: y-axis range 0 - 1320
(II) ETPS/2 Elantech Touchpad: pressure range 0 - 255
(II) ETPS/2 Elantech Touchpad: finger width range 0 - 15
(II) ETPS/2 Elantech Touchpad: buttons: left right double triple
(--) ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
ETPS/2 Elantech Touchpad no synaptics event device found
(**) Option "Device" "/dev/input/mouse0"
Query no Synaptics: 6003C8
(--) ETPS/2 Elantech Touchpad: no supported touchpad found
(EE) ETPS/2 Elantech Touchpad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ETPS/2 Elantech Touchpad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: removing device Razer  Razer Abyssus
(II) Razer  Razer Abyssus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) USB 2.0 UVC VGA WebCam: Device reopened after 1 attempts.
(II) Asus WMI hotkeys: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Gaming Keyboard (/dev/input/event15)
(**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event15"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Gaming Keyboard (/dev/input/event8)
(**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event8"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device G11 Keyboard (/dev/input/event16)
(**) G11 Keyboard: Applying InputClass "evdev keyboard catchall"
(**) G11 Keyboard: always reports core events
(**) G11 Keyboard: Device: "/dev/input/event16"
(II) G11 Keyboard: Found keys
(II) G11 Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "G11 Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event17)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event17"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) config/udev: removing device Razer  Razer Abyssus
(II) Razer  Razer Abyssus: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Gaming Keyboard
(II) Gaming Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Gaming Keyboard
(II) Gaming Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device G11 Keyboard
(II) G11 Keyboard: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) USB 2.0 UVC VGA WebCam: Device reopened after 1 attempts.
(II) Asus WMI hotkeys: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event8)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event8"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) config/udev: removing device Razer  Razer Abyssus
(II) Razer  Razer Abyssus: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event8)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event8"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) USB 2.0 UVC VGA WebCam: Device reopened after 1 attempts.
(II) Asus WMI hotkeys: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) config/udev: removing device Razer  Razer Abyssus
(II) Razer  Razer Abyssus: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) USB 2.0 UVC VGA WebCam: Device reopened after 1 attempts.
(II) Asus WMI hotkeys: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event8)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event8"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) config/udev: Adding input device Gaming Keyboard (/dev/input/event16)
(**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event16"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Gaming Keyboard (/dev/input/event15)
(**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event15"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device G11 Keyboard (/dev/input/event17)
(**) G11 Keyboard: Applying InputClass "evdev keyboard catchall"
(**) G11 Keyboard: always reports core events
(**) G11 Keyboard: Device: "/dev/input/event17"
(II) G11 Keyboard: Found keys
(II) G11 Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "G11 Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) config/udev: removing device Gaming Keyboard
(II) Gaming Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device G11 Keyboard
(II) G11 Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Gaming Keyboard
(II) Gaming Keyboard: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: removing device Razer  Razer Abyssus
(II) Razer  Razer Abyssus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) USB 2.0 UVC VGA WebCam: Device reopened after 1 attempts.
(II) Asus WMI hotkeys: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Gaming Keyboard (/dev/input/event15)
(**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event15"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Gaming Keyboard (/dev/input/event8)
(**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event8"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device G11 Keyboard (/dev/input/event16)
(**) G11 Keyboard: Applying InputClass "evdev keyboard catchall"
(**) G11 Keyboard: always reports core events
(**) G11 Keyboard: Device: "/dev/input/event16"
(II) G11 Keyboard: Found keys
(II) G11 Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "G11 Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event17)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event17"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) config/udev: removing device Razer  Razer Abyssus
(II) Razer  Razer Abyssus: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event17)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event17"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) config/udev: removing device Gaming Keyboard
(II) Gaming Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Gaming Keyboard
(II) Gaming Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device G11 Keyboard
(II) G11 Keyboard: Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) config/udev: removing device Razer  Razer Abyssus
(II) Razer  Razer Abyssus: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) USB 2.0 UVC VGA WebCam: Device reopened after 1 attempts.
(II) Asus WMI hotkeys: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event8)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event8"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(II) config/udev: removing device Razer  Razer Abyssus
(II) Razer  Razer Abyssus: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) USB 2.0 UVC VGA WebCam: Device reopened after 1 attempts.
(II) Asus WMI hotkeys: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Gaming Keyboard (/dev/input/event8)
(**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event8"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Gaming Keyboard (/dev/input/event15)
(**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event15"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device G11 Keyboard (/dev/input/event16)
(**) G11 Keyboard: Applying InputClass "evdev keyboard catchall"
(**) G11 Keyboard: always reports core events
(**) G11 Keyboard: Device: "/dev/input/event16"
(II) G11 Keyboard: Found keys
(II) G11 Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "G11 Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event17)
(**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
(**) Razer  Razer Abyssus: always reports core events
(**) Razer  Razer Abyssus: Device: "/dev/input/event17"
(II) Razer  Razer Abyssus: Found 11 mouse buttons
(II) Razer  Razer Abyssus: Found scroll wheel(s)
(II) Razer  Razer Abyssus: Found relative axes
(II) Razer  Razer Abyssus: Found x and y relative axes
(II) Razer  Razer Abyssus: Configuring as mouse
(**) Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
(**) Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE)
(II) Razer  Razer Abyssus: initialized for relative axes.
(II) intel(0): EDID vendor "CMO", prod id 5921
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 -hsync -vsync (55.5 kHz)

Le Xorg.8.log :

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
Current Operating System: Linux debian 3.2.0-0.bpo.4-amd64 #1 SMP Debian 3.2.32-1~bpo60+1 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.4-amd64 root=UUID=b7dd488e-e6b8-43e4-9c97-03635fa0528c ro quiet
Build Date: 29 October 2011  06:58:14PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.8.log", Time: Mon Apr 29 13:51:20 2013
(++) Using config file: "/etc/bumblebee/xorg.conf.nouveau"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Device0"
(==) No monitor specified for screen "Screen0".
	Using a default monitor configuration.
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:105a:1043:2112 nVidia Corporation rev 161, Mem @ 0xdc000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  195.36.31  Thu Jun  3 08:59:25 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 0.0.15
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mouse"
(WW) Warning, couldn't open module mouse
(II) UnloadModule: "mouse"
(EE) Failed to load module "mouse" (module does not exist, 0)
(II) LoadModule: "kbd"
(WW) Warning, couldn't open module kbd
(II) UnloadModule: "kbd"
(EE) Failed to load module "kbd" (module does not exist, 0)
(II) NOUVEAU driver Date:   Tue Mar 16 13:08:37 2010 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
	RIVA TNT    (NV04)
	RIVA TNT2   (NV05)
	GeForce 256 (NV10)
	GeForce 2   (NV11, NV15)
	GeForce 4MX (NV17, NV18)
	GeForce 3   (NV20)
	GeForce 4Ti (NV25, NV28)
	GeForce FX  (NV3x)
	GeForce 6   (NV4x)
	GeForce 7   (G7x)
	GeForce 8   (G8x)
(II) Primary Device is: PCI 01@00:00:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card15
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: node name is /dev/dri/card15
(EE) [drm] failed to open device
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.8.log" for additional information.

Le Xorg.conf.nvidia :

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
EndSection

Section "Device"
    Identifier  "Device1"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | grep VGA` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device).
#   BusID "PCI:02:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    Option "ConnectedMonitor" "DFP"
EndSection

Le bumblebee.conf :

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Merci beaucoup !

Hors ligne

#96 Le 29/04/2013, à 13:08

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Euh j'ai très peur... D'abord la version de Bumblebee est assez vieille, ensuite les résultats des premières commandes sont complètement incompréhensibles (mais qu'est-ce qui a bien pu changer entre le premier et le deuxième optirun, sachant que bash a refusé de lancer bumblebeed en disant ne pas le trouver qui plus est !), les drivers nvidia semblent avoir été mal installés car sur ton Xorg.0.log, c'est les symboles GLX de NVIDIA qui sont utilisés (du coup tu ne dois même plus avoir de 3D sur l'affichage normal, genre impossible de lancer glxinfo/glxgears, non ?), enfin la version du pilote nvidia utilisée est carrément obsolète (195, il n'y a même pas le support des plus antiques cartes supportant Optimus, c'est dire...), ce qui rendrait de toutes façons impossible l'usage de ta carte graphique.

Tout ça me laisse penser que tu es sur Squeeze, un système non supporté car bien trop antérieur à l'apparition des cartes Optimus sur le marché...

Hors ligne

#97 Le 29/04/2013, à 16:34

etienne2

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,
Après avoir installer optirun pas de soucis j'en suis content. Mais j'ai un petit problème et je ne sais pas si c'est lié à optirun, le voici: je fais tourner BOINC httt://www.http://doc.ubuntu-fr.org/boinc et depuis que je me sert d'optirun plus rien je ne reçois plus de "travaille" et il y a écrit "suspendu par le CPU", donc sachant que BOINC se sert de la carte graphique y-a-t'il un lien?

En vous remerciant.

Hors ligne

#98 Le 30/04/2013, à 21:13

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@etienne2: BOINC, tu le fais tourner sur optirun ou pas ?

Hors ligne

#99 Le 01/05/2013, à 17:29

etienne2

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@ArchangeGabriel, je viens de faire tourner BOINC sous optirun rien de neuf, mais a priori mon problème peut venir d'optirun quand je le lance pour autre chose, car si c'est autre chose je vais bien voir car depuis que j'ai BOINC(càd plusieur années) je ne m'en suis jamais occupé juste installé et lancé.Mais mes soucis avec on commencés avec l'utilisation d'optirun, donc peut-être un lien.

Hors ligne

#100 Le 01/05/2013, à 20:12

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Je ne suis pas sûr de tout comprendre...

1) Est-ce que optirun marche pour des choses comme glxinfo ou glxspheres, est-ce que ces programmes marchent d'eux-mêmes (i.e. sans optirun) ?

2) Est-ce que BOINC marche sans optirun ?

3) Est-ce que BOINC marche avec optirun ?

4) Est-ce que BOINC marche avec optirun --no-xorg ?

Hors ligne

Haut de page ↑