Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

#76 Le 11/05/2013, à 19:42

fcn50

Re : demarrage en 25 sec

@moko: Qu'est-ce que / fait sur sda7 au lieu sda1!?


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne

#77 Le 11/05/2013, à 19:54

moko138

Re : demarrage en 25 sec

1) Est-ce que ça ralentit le démarrage ?

2) Quand on m'a donné ce portable, il y avait déjà :
sda1 DellUtility
sda2 XP
sda5 (tout au bout du HD) le swap de xp.

  J'ai réduit sda2 puis intercalé
sda6 Data puis
/
/boot
/home.

Hors ligne

#78 Le 11/05/2013, à 21:02

david69

Re : demarrage en 25 sec

ip a | grep inet6 ne me renvoie rien. je l'avais deja fait. nonobstant cela, j'etais intervenu sur le network-manager pour annuler ipv6 sans effet apparent.

es tu sur de la commande df -f? ma console me renvoie que -f n'est pas une option de cette fonction.

et je dis ciao a cups


lenovo G580 - 64 bits - Lubuntu 14.04.01 - merci à tous ceux qui aident
FB Chacolinks ong

Hors ligne

#79 Le 11/05/2013, à 22:38

fcn50

Re : demarrage en 25 sec

david69 a écrit :

es tu sur de la commande df -f? ma console me renvoie que -f n'est pas une option de cette fonction.

Mea culpa, c'est: df -h... faute de frappe.

faucon50 a écrit :

15 secondes d'attente! Donne le retour de : ip a | grep inet6 et de df -f.


@moko: Qu'est-ce que tu fais avec du ext3 au lieu de ext4? Donne aussi le retour de df -h.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne

#80 Le 11/05/2013, à 23:31

moko138

Re : demarrage en 25 sec

@faucon50 : Oui, je t'avais répondu en #75.

Hors ligne

#81 Le 12/05/2013, à 09:17

fcn50

Re : demarrage en 25 sec

moko138 a écrit :

Oui, je t'avais répondu en #75.

Ok, tu veux pas installer la 12.04 mais en faisant un partitionnement manuel pour que ça soit dans le bon ordre et avec ext4? Ah, tu es en dual boot, d'où / en sda7. Mais perso, je mettrais ça dans un autre ordre.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne

#82 Le 12/05/2013, à 09:30

moko138

Re : demarrage en 25 sec

Oui : dans quel ordre ?

Hors ligne

#83 Le 12/05/2013, à 10:29

fcn50

Re : demarrage en 25 sec

Tu n'as qu'un HDD... Je dirais un truck du genre pour commencer, mais ça reste à confirmer:

sda1 /dell
sda2 /xp
sda3 /swap xp
sda4 / (primaire)
sda5 /home (primaire)

Pourquoi ton /home est-il plus petit que /data et à quoi sert cette dernière? Je me demande aussi si /boot à vraiment besoin d'une partition dédiée?

Un doc intéressant:

http://doc.ubuntu-fr.org/tutoriel/comme … avec_ntldr

Dernière modification par faucon50 (Le 12/05/2013, à 10:40)


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne

#84 Le 12/05/2013, à 11:02

moko138

Re : demarrage en 25 sec

/boot séparée : à l'époque je débutais et des tutos indiquaient que, ce répertoire ne devant jamais être plein, il était conseillé de lui attribuer une partition spécifique.
  Ce n'est en effet pas indispensable mais ça m'a donné la bonne habitude d'y faire périodiquement le ménage.

/data, en fat32, est accessible de tout OS ; un /home, en ext, n'est accessible que de linux... (Et encore : portable oblige, le mien est crypté).

faucon50 a écrit :

ça reste à confirmer:
sda1 /dell
sda2 /xp
sda3 /swap xp
sda4 / (primaire)
sda5 /home (primaire)

  Ça fait au moins quatre partitions primaires... 
Les tables de partitions gpt sont apparues bien des années après XP ; sachant que mon HD a une table msdos, où me conseilles-tu de caser ma partition étendue ?

Hors ligne

#85 Le 12/05/2013, à 11:10

L_d_v_c@

Re : demarrage en 25 sec

Bien moi pour revenir au sujet, je passe de 8 secondes avec le noyau lowlatency par défaut à 22 secondes avec le noyau patché RT que j'ai recompilé. Il y a donc des tests que j'ai dû activé ou bien que j'ai oublié de désactiver avec ce noyau.

ludovic@Super-Ordinateur:~$ dmesg -r
<6>[    0.000000] Initializing cgroup subsys cpuset
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.2.44-rt64 (root@Super-Ordinateur) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #3 SMP PREEMPT RT Fri May 3 08:41:38 CEST 2013
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.44-rt64 root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash iommu=noaperture vt.handoff=7
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
<6>[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
<6>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000afde0000 (usable)
<6>[    0.000000]  BIOS-e820: 00000000afde0000 - 00000000afdea000 (ACPI data)
<6>[    0.000000]  BIOS-e820: 00000000afdea000 - 00000000afdeb000 (ACPI NVS)
<6>[    0.000000]  BIOS-e820: 00000000afdeb000 - 00000000b0000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000b4000000 - 00000000b8000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<6>[    0.000000]  BIOS-e820: 0000000100000000 - 0000000250000000 (usable)
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] SMBIOS 2.4 present.
<7>[    0.000000] DMI: Tyan Computer Corporation  MCP55 /S2915 , BIOS 4.01d.2915 05/25/2010
<7>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[    0.000000] No AGP bridge found
<6>[    0.000000] last_pfn = 0x250000 max_arch_pfn = 0x400000000
<7>[    0.000000] MTRR default type: uncachable
<7>[    0.000000] MTRR fixed ranges enabled:
<7>[    0.000000]   00000-9FFFF write-back
<7>[    0.000000]   A0000-BFFFF uncachable
<7>[    0.000000]   C0000-D3FFF write-protect
<7>[    0.000000]   D4000-E3FFF uncachable
<7>[    0.000000]   E4000-FFFFF write-protect
<7>[    0.000000] MTRR variable ranges enabled:
<7>[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
<7>[    0.000000]   1 base 000080000000 mask FFFFE0000000 write-back
<7>[    0.000000]   2 base 0000A0000000 mask FFFFF0000000 write-back
<7>[    0.000000]   3 disabled
<7>[    0.000000]   4 disabled
<7>[    0.000000]   5 disabled
<7>[    0.000000]   6 disabled
<7>[    0.000000]   7 disabled
<7>[    0.000000] TOM2: 0000000250000000 aka 9472M
<6>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>[    0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved)
<6>[    0.000000] last_pfn = 0xafde0 max_arch_pfn = 0x400000000
<6>[    0.000000] found SMP MP-table at [ffff8800000f7940] f7940
<7>[    0.000000] initial memory mapped : 0 - 20000000
<7>[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
<6>[    0.000000] Using GB pages for direct mapping
<6>[    0.000000] init_memory_mapping: 0000000000000000-00000000afde0000
<7>[    0.000000]  0000000000 - 0080000000 page 1G
<7>[    0.000000]  0080000000 - 00afc00000 page 2M
<7>[    0.000000]  00afc00000 - 00afde0000 page 4k
<7>[    0.000000] kernel direct mapping tables up to afde0000 @ 1fffd000-20000000
<6>[    0.000000] init_memory_mapping: 0000000100000000-0000000250000000
<7>[    0.000000]  0100000000 - 0240000000 page 1G
<7>[    0.000000]  0240000000 - 0250000000 page 2M
<7>[    0.000000] kernel direct mapping tables up to 250000000 @ afdde000-afde0000
<6>[    0.000000] RAMDISK: 3587c000 - 36c36000
<4>[    0.000000] ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
<4>[    0.000000] ACPI: XSDT 00000000afde2a70 00064 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
<4>[    0.000000] ACPI: FACP 00000000afde87c2 000F4 (v03 NVIDIA CK8S     06040000 PTL_ 000F4240)
<4>[    0.000000] ACPI: DSDT 00000000afde2ad4 05C7A (v01 NVIDIA      CK8 06040000 MSFT 03000000)
<4>[    0.000000] ACPI: FACS 00000000afdeafc0 00040
<4>[    0.000000] ACPI: SRAT 00000000afde88b6 00150 (v01 AMD    FAM_F_10 06040000 AMD  00000001)
<4>[    0.000000] ACPI: SSDT 00000000afde8a06 0143C (v01 AMD    POWERNOW 06040000 AMD  00000001)
<4>[    0.000000] ACPI: SPCR 00000000afde9e42 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
<4>[    0.000000] ACPI: MCFG 00000000afde9e92 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
<4>[    0.000000] ACPI: HPET 00000000afde9ece 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
<4>[    0.000000] ACPI: APIC 00000000afde9f06 000D2 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
<4>[    0.000000] ACPI: BOOT 00000000afde9fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
<6>[    0.000000] SRAT: Node 0 PXM 0 0-a0000
<6>[    0.000000] SRAT: Node 0 PXM 0 100000-b0000000
<6>[    0.000000] SRAT: Node 0 PXM 0 100000000-150000000
<6>[    0.000000] SRAT: Node 1 PXM 1 150000000-250000000
<6>[    0.000000] NUMA: Node 0 [0,a0000) + [100000,b0000000) -> [0,b0000000)
<6>[    0.000000] NUMA: Node 0 [0,b0000000) + [100000000,150000000) -> [0,150000000)
<6>[    0.000000] Initmem setup node 0 0000000000000000-0000000150000000
<6>[    0.000000]   NODE_DATA [000000014ffd9000 - 000000014fffffff]
<6>[    0.000000] Initmem setup node 1 0000000150000000-0000000250000000
<6>[    0.000000]   NODE_DATA [000000024ffd9000 - 000000024fffffff]
<4>[    0.000000] [ffffea0004980000-ffffea00049fffff] potential offnode page_structs
<7>[    0.000000]  [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014be00000-ffff88014f7fffff] on node 0
<7>[    0.000000]  [ffffea0004a00000-ffffea00081fffff] PMD -> [ffff88024b600000-ffff88024edfffff] on node 1
<4>[    0.000000] Zone PFN ranges:
<4>[    0.000000]   DMA      0x00000010 -> 0x00001000
<4>[    0.000000]   DMA32    0x00001000 -> 0x00100000
<4>[    0.000000]   Normal   0x00100000 -> 0x00250000
<4>[    0.000000] Movable zone start PFN for each node
<4>[    0.000000] early_node_map[4] active PFN ranges
<4>[    0.000000]     0: 0x00000010 -> 0x0000009b
<4>[    0.000000]     0: 0x00000100 -> 0x000afde0
<4>[    0.000000]     0: 0x00100000 -> 0x00150000
<4>[    0.000000]     1: 0x00150000 -> 0x00250000
<7>[    0.000000] On node 0 totalpages: 1047915
<7>[    0.000000]   DMA zone: 56 pages used for memmap
<7>[    0.000000]   DMA zone: 5 pages reserved
<7>[    0.000000]   DMA zone: 3918 pages, LIFO batch:0
<7>[    0.000000]   DMA32 zone: 14280 pages used for memmap
<7>[    0.000000]   DMA32 zone: 701976 pages, LIFO batch:31
<7>[    0.000000]   Normal zone: 4480 pages used for memmap
<7>[    0.000000]   Normal zone: 323200 pages, LIFO batch:31
<7>[    0.000000] On node 1 totalpages: 1048576
<7>[    0.000000]   Normal zone: 14336 pages used for memmap
<7>[    0.000000]   Normal zone: 1034240 pages, LIFO batch:31
<6>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
<6>[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<6>[    0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
<6>[    0.000000] ACPI: IOAPIC (id[0x09] address[0xc8000000] gsi_base[24])
<6>[    0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xc8000000, GSI 24-47
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>[    0.000000] ACPI: IRQ0 used by override.
<7>[    0.000000] ACPI: IRQ2 used by override.
<7>[    0.000000] ACPI: IRQ9 used by override.
<6>[    0.000000] Using ACPI (MADT) for SMP configuration information
<6>[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
<6>[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
<7>[    0.000000] nr_irqs_gsi: 64
<6>[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
<6>[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
<6>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
<6>[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
<6>[    0.000000] PM: Registered nosave memory: 00000000afde0000 - 00000000afdea000
<6>[    0.000000] PM: Registered nosave memory: 00000000afdea000 - 00000000afdeb000
<6>[    0.000000] PM: Registered nosave memory: 00000000afdeb000 - 00000000b0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000b4000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000e0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
<6>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
<6>[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
<6>[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
<6>[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
<6>[    0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
<6>[    0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:28000000)
<6>[    0.000000] Booting paravirtualized kernel on bare hardware
<6>[    0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4096 nr_cpu_ids:8 nr_node_ids:2
<6>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014fc00000 s80192 r8192 d22208 u524288
<7>[    0.000000] pcpu-alloc: s80192 r8192 d22208 u524288 alloc=1*2097152
<7>[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
<4>[    0.000000] Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 2063334
<4>[    0.000000] Policy zone: Normal
<5>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.44-rt64 root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash iommu=noaperture vt.handoff=7
<6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<7>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
<7>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
<6>[    0.000000] Memory: 8164388k/9699328k available (5212k kernel code, 1313364k absent, 221576k reserved, 6128k data, 2816k init)
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	Verbose stalled-CPUs detection is disabled.
<6>[    0.000000] NR_IRQS:262400 nr_irqs:1152 16
<6>[    0.000000] Extended CMOS year: 2000
<7>[    0.000000] spurious 8259A interrupt: IRQ7.
<6>[    0.000000] Console: colour dummy device 80x25
<6>[    0.000000] console [tty0] enabled
<6>[    0.000000] allocated 268435456 bytes of page_cgroup
<6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<7>[    0.000000] hpet clockevent registered
<4>[    0.000000] Fast TSC calibration using PIT
<4>[    0.000000] Detected 2300.057 MHz processor.
<6>[    0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.11 BogoMIPS (lpj=2300057)
<6>[    0.001012] pid_max: default: 32768 minimum: 301
<6>[    0.001459] Security Framework initialized
<6>[    0.001482] AppArmor: AppArmor initialized
<6>[    0.003283] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[    0.007489] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[    0.009126] Mount-cache hash table entries: 256
<6>[    0.009658] Initializing cgroup subsys cpuacct
<6>[    0.009665] Initializing cgroup subsys memory
<6>[    0.009729] Initializing cgroup subsys devices
<6>[    0.009732] Initializing cgroup subsys freezer
<6>[    0.009735] Initializing cgroup subsys blkio
<6>[    0.009777] Initializing cgroup subsys perf_event
<7>[    0.009913] tseg: 00afe00000
<6>[    0.009915] CPU: Physical Processor ID: 0
<6>[    0.009917] CPU: Processor Core ID: 0
<6>[    0.009919] mce: CPU supports 6 MCE banks
<6>[    0.009932] using AMD E400 aware idle routine
<6>[    0.010252] ACPI: Core revision 20110623
<6>[    0.022019] ftrace: allocating 23682 entries in 93 pages
<6>[    0.024522] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[    0.034568] CPU0: Quad-Core AMD Opteron(tm) Processor 2356 stepping 03
<6>[    0.034997] Performance Events: AMD PMU driver.
<6>[    0.034997] ... version:                0
<6>[    0.034997] ... bit width:              48
<6>[    0.034997] ... generic registers:      4
<6>[    0.034997] ... value mask:             0000ffffffffffff
<6>[    0.034997] ... max period:             00007fffffffffff
<6>[    0.034997] ... fixed-purpose events:   0
<6>[    0.034997] ... event mask:             000000000000000f
<6>[    0.044350] NMI watchdog enabled, takes one hw-pmu counter.
<6>[    0.055070] Booting Node   0, Processors  #1
<7>[    0.055073] smpboot cpu 1: start_ip = 96000
<6>[    0.127044] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.135053]  #2
<7>[    0.135056] smpboot cpu 2: start_ip = 96000
<6>[    0.207021] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.215042]  #3
<7>[    0.215044] smpboot cpu 3: start_ip = 96000
<6>[    0.287009] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.296034]  Ok.
<6>[    0.296036] Booting Node   1, Processors  #4
<7>[    0.296039] smpboot cpu 4: start_ip = 96000
<6>[    0.367998] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.377018]  #5
<7>[    0.377021] smpboot cpu 5: start_ip = 96000
<6>[    0.448985] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.458009]  #6
<7>[    0.458011] smpboot cpu 6: start_ip = 96000
<6>[    0.529972] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.537997]  #7 Ok.
<7>[    0.537999] smpboot cpu 7: start_ip = 96000
<6>[    0.609960] NMI watchdog enabled, takes one hw-pmu counter.
<6>[    0.611924] Brought up 8 CPUs
<6>[    0.611928] Total of 8 processors activated (36804.73 BogoMIPS).
<6>[    0.615118] devtmpfs: initialized
<6>[    0.616142] EVM: security.selinux
<6>[    0.616144] EVM: security.SMACK64
<6>[    0.616146] EVM: security.capability
<6>[    0.616187] PM: Registering ACPI NVS region at afdea000 (4096 bytes)
<6>[    0.617851] print_constraints: dummy: 
<6>[    0.617927] RTC time:  7:09:29, date: 05/12/13
<6>[    0.618171] NET: Registered protocol family 16
<7>[    0.618875] node 0 link 2: io port [1000, 4fff]
<7>[    0.618879] node 1 link 0: io port [5000, 5fff]
<7>[    0.618882] node 1 link 0: io port [f000, ffff]
<6>[    0.618885] TOM: 00000000b0000000 aka 2816M
<7>[    0.618888] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
<7>[    0.618891] node 0 link 2: mmio [b8000000, c7ffffff]
<7>[    0.618895] node 1 link 0: mmio [c8000000, cfffffff]
<7>[    0.618899] node 0 link 2: mmio [a0000, bffff]
<7>[    0.618902] node 0 link 2: mmio [e0000000, e7ffffff] ==> none
<7>[    0.618923] node 1 link 0: mmio [e8000000, efffffff] ==> none
<6>[    0.618929] TOM2: 0000000250000000 aka 9472M
<7>[    0.618932] bus: [00, 7f] on node 0 link 2
<7>[    0.618934] bus: 00 index 0 [io  0x0000-0x4fff]
<7>[    0.618937] bus: 00 index 1 [io  0x6000-0xefff]
<7>[    0.618939] bus: 00 index 2 [mem 0xb0000000-0xc7ffffff]
<7>[    0.618941] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
<7>[    0.618943] bus: 00 index 4 [mem 0xf0000000-0xffffffff]
<7>[    0.618945] bus: 00 index 5 [mem 0xd0000000-0xdfffffff]
<7>[    0.618947] bus: 00 index 6 [mem 0x250000000-0xfcffffffff]
<7>[    0.618950] bus: [80, ff] on node 1 link 0
<7>[    0.618952] bus: 80 index 0 [io  0x5000-0x5fff]
<7>[    0.618954] bus: 80 index 1 [io  0xf000-0xffff]
<7>[    0.618956] bus: 80 index 2 [mem 0xc8000000-0xcfffffff]
<6>[    0.618964] Extended Config Space enabled on 2 nodes
<6>[    0.619022] ACPI: bus type pci registered
<6>[    0.619214] PCI: MMCONFIG for domain 0000 [bus 00-80] at [mem 0xe0000000-0xe80fffff] (base 0xe0000000)
<6>[    0.619218] PCI: MMCONFIG at [mem 0xe0000000-0xe80fffff] reserved in E820
<6>[    0.639130] PCI: Using configuration type 1 for base access
<6>[    0.645987] bio: create slab <bio-0> at 0
<6>[    0.646278] ACPI: Added _OSI(Module Device)
<6>[    0.646278] ACPI: Added _OSI(Processor Device)
<6>[    0.646278] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.646278] ACPI: Added _OSI(Processor Aggregator Device)
<7>[    0.647972] ACPI: EC: Look up EC in DSDT
<6>[    0.667011] ACPI: Interpreter enabled
<6>[    0.667019] ACPI: (supports S0 S1 S4 S5)
<6>[    0.667080] ACPI: Using IOAPIC for interrupt routing
<6>[    0.696375] ACPI: No dock devices found.
<6>[    0.696378] HEST: Table not found.
<6>[    0.696383] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    0.696959] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
<6>[    0.697856] pci_root PNP0A03:00: host bridge window [io  0x0000-0x03af]
<6>[    0.697859] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
<6>[    0.697862] pci_root PNP0A03:00: host bridge window [io  0x03e0-0x0cf7]
<6>[    0.697865] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x4fff]
<6>[    0.697868] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>[    0.697870] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
<6>[    0.697873] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xc7ffffff]
<6>[    0.697883] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[    0.697968] pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
<7>[    0.698342] pci 0000:00:01.0: [10de:0364] type 0 class 0x000601
<7>[    0.698360] pci 0000:00:01.0: reg 10: [io  0x1c00-0x1c7f]
<7>[    0.698432] pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
<7>[    0.698445] pci 0000:00:01.1: reg 10: [io  0x2000-0x203f]
<7>[    0.698475] pci 0000:00:01.1: reg 20: [io  0x2440-0x247f]
<7>[    0.698492] pci 0000:00:01.1: reg 24: [io  0x2400-0x243f]
<7>[    0.698543] pci 0000:00:01.1: PME# supported from D3hot D3cold
<7>[    0.698549] pci 0000:00:01.1: PME# disabled
<7>[    0.698612] pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
<7>[    0.698622] pci 0000:00:02.0: reg 10: [mem 0xb8004000-0xb8004fff]
<7>[    0.698681] pci 0000:00:02.0: supports D1 D2
<7>[    0.698684] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.698687] pci 0000:00:02.0: PME# disabled
<7>[    0.698711] pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
<7>[    0.698721] pci 0000:00:02.1: reg 10: [mem 0xb8005000-0xb80050ff]
<7>[    0.698772] pci 0000:00:02.1: supports D1 D2
<7>[    0.698784] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.698794] pci 0000:00:02.1: PME# disabled
<7>[    0.698853] pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
<7>[    0.698874] pci 0000:00:04.0: reg 20: [io  0x2480-0x248f]
<7>[    0.698971] pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
<7>[    0.698987] pci 0000:00:05.0: reg 10: [io  0x24d0-0x24d7]
<7>[    0.699000] pci 0000:00:05.0: reg 14: [io  0x24c4-0x24c7]
<7>[    0.699009] pci 0000:00:05.0: reg 18: [io  0x24c8-0x24cf]
<7>[    0.699015] pci 0000:00:05.0: reg 1c: [io  0x24c0-0x24c3]
<7>[    0.699020] pci 0000:00:05.0: reg 20: [io  0x2490-0x249f]
<7>[    0.699026] pci 0000:00:05.0: reg 24: [mem 0xb8006000-0xb8006fff]
<7>[    0.699085] pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
<7>[    0.699106] pci 0000:00:05.1: reg 10: [io  0x24e8-0x24ef]
<7>[    0.699122] pci 0000:00:05.1: reg 14: [io  0x24dc-0x24df]
<7>[    0.699135] pci 0000:00:05.1: reg 18: [io  0x24e0-0x24e7]
<7>[    0.699148] pci 0000:00:05.1: reg 1c: [io  0x24d8-0x24db]
<7>[    0.699158] pci 0000:00:05.1: reg 20: [io  0x24a0-0x24af]
<7>[    0.699168] pci 0000:00:05.1: reg 24: [mem 0xb8007000-0xb8007fff]
<7>[    0.699234] pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
<7>[    0.699245] pci 0000:00:05.2: reg 10: [io  0x2800-0x2807]
<7>[    0.699250] pci 0000:00:05.2: reg 14: [io  0x24f4-0x24f7]
<7>[    0.699266] pci 0000:00:05.2: reg 18: [io  0x24f8-0x24ff]
<7>[    0.699274] pci 0000:00:05.2: reg 1c: [io  0x24f0-0x24f3]
<7>[    0.699284] pci 0000:00:05.2: reg 20: [io  0x24b0-0x24bf]
<7>[    0.699293] pci 0000:00:05.2: reg 24: [mem 0xb8008000-0xb8008fff]
<7>[    0.699361] pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
<7>[    0.699429] pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
<7>[    0.699446] pci 0000:00:06.1: reg 10: [mem 0xb8000000-0xb8003fff]
<7>[    0.699504] pci 0000:00:06.1: PME# supported from D3hot D3cold
<7>[    0.699517] pci 0000:00:06.1: PME# disabled
<7>[    0.699584] pci 0000:00:08.0: [10de:0372] type 0 class 0x000200
<7>[    0.699597] pci 0000:00:08.0: reg 10: [mem 0xb8009000-0xb8009fff]
<7>[    0.699612] pci 0000:00:08.0: reg 14: [io  0x2808-0x280f]
<7>[    0.699628] pci 0000:00:08.0: reg 18: [mem 0xb8005800-0xb80058ff]
<7>[    0.699644] pci 0000:00:08.0: reg 1c: [mem 0xb8005400-0xb800540f]
<7>[    0.699692] pci 0000:00:08.0: supports D1 D2
<7>[    0.699703] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.699714] pci 0000:00:08.0: PME# disabled
<7>[    0.699760] pci 0000:00:09.0: [10de:0372] type 0 class 0x000200
<7>[    0.699773] pci 0000:00:09.0: reg 10: [mem 0xb800b000-0xb800bfff]
<7>[    0.699788] pci 0000:00:09.0: reg 14: [io  0x2810-0x2817]
<7>[    0.699797] pci 0000:00:09.0: reg 18: [mem 0xb800a000-0xb800a0ff]
<7>[    0.699806] pci 0000:00:09.0: reg 1c: [mem 0xb8005c00-0xb8005c0f]
<7>[    0.699850] pci 0000:00:09.0: supports D1 D2
<7>[    0.699852] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.699856] pci 0000:00:09.0: PME# disabled
<7>[    0.699916] pci 0000:00:0a.0: [10de:0376] type 1 class 0x000604
<7>[    0.699991] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.699994] pci 0000:00:0a.0: PME# disabled
<7>[    0.700033] pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604
<7>[    0.700071] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.700075] pci 0000:00:0d.0: PME# disabled
<7>[    0.700111] pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
<7>[    0.700157] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.700169] pci 0000:00:0f.0: PME# disabled
<7>[    0.700200] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
<7>[    0.700255] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
<7>[    0.700301] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
<7>[    0.700340] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
<7>[    0.700384] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
<7>[    0.700427] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
<7>[    0.700483] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
<7>[    0.700535] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
<7>[    0.700597] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
<7>[    0.700652] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
<7>[    0.700753] pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00
<7>[    0.700778] pci 0000:01:05.0: reg 10: [mem 0xb8104000-0xb81047ff]
<7>[    0.700796] pci 0000:01:05.0: reg 14: [mem 0xb8100000-0xb8103fff]
<7>[    0.700854] pci 0000:01:05.0: supports D1 D2
<7>[    0.700865] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
<7>[    0.700876] pci 0000:01:05.0: PME# disabled
<6>[    0.700916] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
<7>[    0.700925] pci 0000:00:06.0:   bridge window [mem 0xb8100000-0xb81fffff]
<7>[    0.700930] pci 0000:00:06.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
<7>[    0.700933] pci 0000:00:06.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
<7>[    0.700937] pci 0000:00:06.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
<7>[    0.700940] pci 0000:00:06.0:   bridge window [io  0x0d00-0x4fff] (subtractive decode)
<7>[    0.700943] pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
<7>[    0.700946] pci 0000:00:06.0:   bridge window [mem 0xb0000000-0xc7ffffff] (subtractive decode)
<7>[    0.701017] pci 0000:02:00.0: [10b5:8608] type 1 class 0x000604
<7>[    0.701028] pci 0000:02:00.0: reg 10: [mem 0xb8200000-0xb821ffff]
<7>[    0.701085] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
<7>[    0.701103] pci 0000:02:00.0: PME# disabled
<6>[    0.702918] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<7>[    0.702926] pci 0000:00:0a.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.702929] pci 0000:00:0a.0:   bridge window [mem 0xb8200000-0xb84fffff]
<7>[    0.702929] pci 0000:03:01.0: [10b5:8608] type 1 class 0x000604
<7>[    0.703030] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
<7>[    0.703035] pci 0000:03:01.0: PME# disabled
<7>[    0.703100] pci 0000:03:05.0: [10b5:8608] type 1 class 0x000604
<7>[    0.703179] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
<7>[    0.703192] pci 0000:03:05.0: PME# disabled
<7>[    0.703281] pci 0000:03:07.0: [10b5:8608] type 1 class 0x000604
<7>[    0.703372] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
<7>[    0.703385] pci 0000:03:07.0: PME# disabled
<7>[    0.703460] pci 0000:03:09.0: [10b5:8608] type 1 class 0x000604
<7>[    0.703539] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
<7>[    0.703552] pci 0000:03:09.0: PME# disabled
<6>[    0.703597] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<7>[    0.703611] pci 0000:02:00.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.703621] pci 0000:02:00.0:   bridge window [mem 0xb8300000-0xb84fffff]
<7>[    0.703730] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
<7>[    0.703771] pci 0000:04:00.0: reg 10: [mem 0xb8300000-0xb8301fff 64bit]
<7>[    0.703884] pci 0000:04:00.0: PME# supported from D0 D3hot
<7>[    0.703895] pci 0000:04:00.0: PME# disabled
<6>[    0.705917] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<7>[    0.705929] pci 0000:03:01.0:   bridge window [mem 0xb8300000-0xb83fffff]
<7>[    0.706036] pci 0000:05:00.0: [1b4b:9120] type 0 class 0x000106
<7>[    0.706082] pci 0000:05:00.0: reg 10: [io  0x3020-0x3027]
<7>[    0.706092] pci 0000:05:00.0: reg 14: [io  0x3014-0x3017]
<7>[    0.706111] pci 0000:05:00.0: reg 18: [io  0x3018-0x301f]
<7>[    0.706129] pci 0000:05:00.0: reg 1c: [io  0x3010-0x3013]
<7>[    0.706148] pci 0000:05:00.0: reg 20: [io  0x3000-0x300f]
<7>[    0.706167] pci 0000:05:00.0: reg 24: [mem 0xb8400000-0xb84007ff]
<7>[    0.706194] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<7>[    0.706248] pci 0000:05:00.0: PME# supported from D3hot
<7>[    0.706262] pci 0000:05:00.0: PME# disabled
<6>[    0.707913] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<7>[    0.707919] pci 0000:03:05.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.707923] pci 0000:03:05.0:   bridge window [mem 0xb8400000-0xb84fffff]
<6>[    0.707990] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[    0.708044] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<7>[    0.708044] pci 0000:08:00.0: [1033:0125] type 1 class 0x000604
<7>[    0.708147] pci 0000:08:00.0: supports D1
<7>[    0.708157] pci 0000:08:00.0: PME# supported from D0 D1 D3hot D3cold
<7>[    0.708177] pci 0000:08:00.0: PME# disabled
<7>[    0.708227] pci 0000:08:00.1: [1033:0125] type 1 class 0x000604
<7>[    0.708253] pci 0000:08:00.1: reg 10: [mem 0xb8500000-0xb850007f 64bit]
<7>[    0.708350] pci 0000:08:00.1: supports D1
<7>[    0.708361] pci 0000:08:00.1: PME# supported from D0 D1 D3hot D3cold
<7>[    0.708373] pci 0000:08:00.1: PME# disabled
<6>[    0.708414] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
<6>[    0.708426] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<7>[    0.708431] pci 0000:00:0d.0:   bridge window [mem 0xb8500000-0xb85fffff]
<6>[    0.708514] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[    0.708628] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<7>[    0.708746] pci 0000:0b:00.0: [1002:5b63] type 0 class 0x000300
<7>[    0.708762] pci 0000:0b:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
<7>[    0.708776] pci 0000:0b:00.0: reg 14: [io  0x4000-0x40ff]
<7>[    0.708794] pci 0000:0b:00.0: reg 18: [mem 0xb8600000-0xb860ffff]
<7>[    0.708826] pci 0000:0b:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>[    0.708868] pci 0000:0b:00.0: supports D1 D2
<7>[    0.708912] pci 0000:0b:00.1: [1002:5b73] type 0 class 0x000380
<7>[    0.708930] pci 0000:0b:00.1: reg 10: [mem 0xb8610000-0xb861ffff]
<7>[    0.709001] pci 0000:0b:00.1: supports D1 D2
<6>[    0.709022] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
<6>[    0.709053] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<7>[    0.709057] pci 0000:00:0f.0:   bridge window [io  0x4000-0x4fff]
<7>[    0.709064] pci 0000:00:0f.0:   bridge window [mem 0xb8600000-0xb86fffff]
<7>[    0.709068] pci 0000:00:0f.0:   bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[    0.709093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[    0.709358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
<7>[    0.709508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
<7>[    0.709616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
<7>[    0.709711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
<7>[    0.709890] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
<6>[    0.710003]  pci0000:00: Requesting ACPI _OSC control (0x1d)
<6>[    0.710007]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[    0.710010] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[    0.777413] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
<6>[    0.778121] pci_root PNP0A03:01: host bridge window [io  0x5000-0xffff]
<6>[    0.778124] pci_root PNP0A03:01: host bridge window [io  0x03b0-0x03df]
<6>[    0.778127] pci_root PNP0A03:01: host bridge window [mem 0x000a0000-0x000bffff]
<6>[    0.778133] pci_root PNP0A03:01: host bridge window [mem 0x000c0000-0x000dffff]
<6>[    0.778136] pci_root PNP0A03:01: host bridge window [mem 0xc8000000-0xcfffffff]
<6>[    0.778144] pci_root PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[    0.778180] pci 0000:80:00.0: [10de:0369] type 0 class 0x000500
<7>[    0.778446] pci 0000:80:01.0: [10de:0361] type 0 class 0x000500
<7>[    0.778454] pci 0000:80:01.0: reg 10: [io  0xfc00-0xfc7f]
<7>[    0.778470] pci 0000:80:01.0: reg 14: [mem 0xc8000000-0xc8000fff]
<7>[    0.778534] pci 0000:80:01.1: [10de:0368] type 0 class 0x000c05
<7>[    0.778558] pci 0000:80:01.1: reg 10: [io  0x5000-0x503f]
<7>[    0.778589] pci 0000:80:01.1: reg 20: [io  0x5440-0x547f]
<7>[    0.778606] pci 0000:80:01.1: reg 24: [io  0x5400-0x543f]
<7>[    0.778643] pci 0000:80:01.1: PME# supported from D3hot D3cold
<7>[    0.778664] pci 0000:80:01.1: PME# disabled
<7>[    0.778711] pci 0000:80:0d.0: [10de:0378] type 1 class 0x000604
<7>[    0.778762] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.778784] pci 0000:80:0d.0: PME# disabled
<6>[    0.778865] pci 0000:80:0d.0: PCI bridge to [bus 81-81]
<7>[    0.778881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
<7>[    0.779050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
<6>[    0.779184]  pci0000:80: Requesting ACPI _OSC control (0x1d)
<6>[    0.779191]  pci0000:80: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[    0.779194] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[    0.788866] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.789209] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.789562] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.789908] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.790244] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.790597] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.790927] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.791278] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.791618] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.791943] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.792270] ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.792597] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.792926] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.793260] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.793609] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.793967] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
<6>[    0.794294] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5
<6>[    0.794621] ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.795007] ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.795356] ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.795721] ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.796055] ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.796423] ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.796772] ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.797121] ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.797462] ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.797828] ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.798168] ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.798537] ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.798886] ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.799299] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[    0.799299] vgaarb: loaded
<6>[    0.799299] vgaarb: bridge control possible 0000:0b:00.0
<4>[    0.800113] i2c-core: driver [aat2870] using legacy suspend method
<4>[    0.800115] i2c-core: driver [aat2870] using legacy resume method
<5>[    0.800771] SCSI subsystem initialized
<7>[    0.800990] libata version 3.00 loaded.
<6>[    0.801245] usbcore: registered new interface driver usbfs
<6>[    0.801295] usbcore: registered new interface driver hub
<6>[    0.801310] usbcore: registered new device driver usb
<6>[    0.801929] PCI: Using ACPI for IRQ routing
<7>[    0.804828] PCI: pci_cache_line_size set to 64 bytes
<7>[    0.805094] reserve RAM buffer: 000000000009bc00 - 000000000009ffff 
<7>[    0.805098] reserve RAM buffer: 00000000afde0000 - 00000000afffffff 
<6>[    0.805564] NetLabel: Initializing
<6>[    0.805566] NetLabel:  domain hash size = 128
<6>[    0.805568] NetLabel:  protocols = UNLABELED CIPSOv4
<6>[    0.805668] NetLabel:  unlabeled traffic allowed by default
<6>[    0.805982] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>[    0.805990] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>[    0.805995] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
<6>[    0.817131] Switching to clocksource hpet
<6>[    0.850026] AppArmor: AppArmor Filesystem Enabled
<6>[    0.850132] pnp: PnP ACPI init
<6>[    0.850166] ACPI: bus type pnp registered
<7>[    0.850427] pnp 00:00: [mem 0xffc00000-0xffffffff]
<7>[    0.850431] pnp 00:00: [mem 0xfec00000-0xfec00fff]
<7>[    0.850434] pnp 00:00: [mem 0xfee00000-0xfeefffff]
<7>[    0.850437] pnp 00:00: [mem 0xfed00000-0xfed00fff]
<6>[    0.850649] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
<6>[    0.850654] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
<6>[    0.850659] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[    0.850664] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
<7>[    0.850669] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
<7>[    0.851160] pnp 00:01: [bus 00-7f]
<7>[    0.851163] pnp 00:01: [io  0x0cf8-0x0cff]
<7>[    0.851167] pnp 00:01: [io  0x0000-0x03af window]
<7>[    0.851171] pnp 00:01: [io  0x03b0-0x03df window]
<7>[    0.851174] pnp 00:01: [io  0x03e0-0x0cf7 window]
<7>[    0.851177] pnp 00:01: [io  0x0d00-0x4fff window]
<7>[    0.851180] pnp 00:01: [mem 0x000a0000-0x000bffff window]
<7>[    0.851183] pnp 00:01: [mem 0x000c0000-0x000dffff window]
<7>[    0.851186] pnp 00:01: [mem 0xb0000000-0xc7ffffff window]
<7>[    0.851394] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[    0.851745] pnp 00:02: [irq 0 disabled]
<7>[    0.851762] pnp 00:02: [irq 8]
<7>[    0.851770] pnp 00:02: [mem 0xfed00000-0xfed003ff]
<7>[    0.851876] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
<7>[    0.852034] pnp 00:03: [mem 0xb8040000-0xb8047fff]
<6>[    0.852220] system 00:03: [mem 0xb8040000-0xb8047fff] has been reserved
<7>[    0.852224] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.853154] pnp 00:04: [io  0x1000-0x107f]
<7>[    0.853161] pnp 00:04: [io  0x1080-0x10ff]
<7>[    0.853168] pnp 00:04: [io  0x1400-0x147f]
<7>[    0.853173] pnp 00:04: [io  0x1480-0x14ff]
<7>[    0.853180] pnp 00:04: [io  0x1800-0x187f]
<7>[    0.853183] pnp 00:04: [io  0x1880-0x18ff]
<7>[    0.853190] pnp 00:04: [io  0x2440-0x247f]
<7>[    0.853193] pnp 00:04: [io  0x2400-0x243f]
<6>[    0.853376] system 00:04: [io  0x1000-0x107f] has been reserved
<6>[    0.853380] system 00:04: [io  0x1080-0x10ff] has been reserved
<6>[    0.853384] system 00:04: [io  0x1400-0x147f] has been reserved
<6>[    0.853388] system 00:04: [io  0x1480-0x14ff] has been reserved
<6>[    0.853398] system 00:04: [io  0x1800-0x187f] has been reserved
<6>[    0.853402] system 00:04: [io  0x1880-0x18ff] has been reserved
<6>[    0.853406] system 00:04: [io  0x2440-0x247f] has been reserved
<6>[    0.853410] system 00:04: [io  0x2400-0x243f] has been reserved
<7>[    0.853414] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.853439] pnp 00:05: [io  0x0060]
<7>[    0.853442] pnp 00:05: [io  0x0064]
<7>[    0.853454] pnp 00:05: [irq 1]
<7>[    0.853576] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
<7>[    0.853609] pnp 00:06: [irq 12]
<7>[    0.853735] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
<7>[    0.853785] pnp 00:07: [io  0x0010-0x001f]
<7>[    0.853787] pnp 00:07: [io  0x0022-0x003f]
<7>[    0.853797] pnp 00:07: [io  0x0044-0x005f]
<7>[    0.853800] pnp 00:07: [io  0x0062-0x0063]
<7>[    0.853802] pnp 00:07: [io  0x0065-0x006f]
<7>[    0.853805] pnp 00:07: [io  0x0072-0x0073]
<7>[    0.853812] pnp 00:07: [io  0x0074-0x007f]
<7>[    0.853814] pnp 00:07: [io  0x0091-0x0093]
<7>[    0.853817] pnp 00:07: [io  0x0097-0x009f]
<7>[    0.853820] pnp 00:07: [io  0x00a2-0x00bf]
<7>[    0.853823] pnp 00:07: [io  0x00e0-0x00ef]
<7>[    0.853825] pnp 00:07: [io  0x04d0-0x04d1]
<7>[    0.853828] pnp 00:07: [io  0x0080]
<7>[    0.853831] pnp 00:07: [io  0x0600-0x06fe]
<7>[    0.853837] pnp 00:07: [io  0x0c05-0x0c06]
<6>[    0.854068] system 00:07: [io  0x04d0-0x04d1] has been reserved
<6>[    0.854078] system 00:07: [io  0x0600-0x06fe] has been reserved
<6>[    0.854090] system 00:07: [io  0x0c05-0x0c06] has been reserved
<7>[    0.854107] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.854162] pnp 00:08: [io  0x0000-0x0008]
<7>[    0.854165] pnp 00:08: [io  0x000a-0x000f]
<7>[    0.854174] pnp 00:08: [io  0x0081-0x0083]
<7>[    0.854177] pnp 00:08: [io  0x0087]
<7>[    0.854180] pnp 00:08: [io  0x0089-0x008b]
<7>[    0.854186] pnp 00:08: [io  0x008f]
<7>[    0.854189] pnp 00:08: [io  0x00c0-0x00d1]
<7>[    0.854191] pnp 00:08: [io  0x00d4-0x00df]
<7>[    0.854195] pnp 00:08: [dma 4]
<7>[    0.854284] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
<7>[    0.854314] pnp 00:09: [io  0x0061]
<7>[    0.854407] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
<7>[    0.854506] pnp 00:0a: [io  0x0070-0x0071]
<7>[    0.854610] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[    0.854642] pnp 00:0b: [io  0x00f0-0x00f1]
<7>[    0.854651] pnp 00:0b: [irq 13]
<7>[    0.854757] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
<7>[    0.855595] pnp 00:0c: [io  0x03f8-0x03ff]
<7>[    0.855605] pnp 00:0c: [irq 4]
<7>[    0.855772] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[    0.856500] pnp 00:0d: [io  0x03f0-0x03f5]
<7>[    0.856504] pnp 00:0d: [io  0x03f7]
<7>[    0.856513] pnp 00:0d: [irq 6]
<7>[    0.856516] pnp 00:0d: [dma 2]
<7>[    0.856639] pnp 00:0d: Plug and Play ACPI device, IDs PNP0700 (active)
<7>[    0.858117] pnp 00:0e: [bus 80-ff]
<7>[    0.858120] pnp 00:0e: [io  0x0cf8-0x0cff]
<7>[    0.858123] pnp 00:0e: [io  0x5000-0xffff window]
<7>[    0.858127] pnp 00:0e: [io  0x03b0-0x03df window]
<7>[    0.858134] pnp 00:0e: [mem 0x000a0000-0x000bffff window]
<7>[    0.858137] pnp 00:0e: [mem 0x000c0000-0x000dffff window]
<7>[    0.858140] pnp 00:0e: [mem 0xc8000000-0xcfffffff window]
<7>[    0.858286] pnp 00:0e: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[    0.858410] pnp 00:0f: [mem 0xc8040000-0xc8047fff]
<6>[    0.858611] system 00:0f: [mem 0xc8040000-0xc8047fff] has been reserved
<7>[    0.858615] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.859331] pnp 00:10: [io  0xf000-0xf07f]
<7>[    0.859334] pnp 00:10: [io  0xf080-0xf0ff]
<7>[    0.859337] pnp 00:10: [io  0xf400-0xf47f]
<7>[    0.859340] pnp 00:10: [io  0xf480-0xf4ff]
<7>[    0.859342] pnp 00:10: [io  0xf800-0xf87f]
<7>[    0.859345] pnp 00:10: [io  0xf880-0xf8ff]
<6>[    0.859573] system 00:10: [io  0xf000-0xf07f] has been reserved
<6>[    0.859577] system 00:10: [io  0xf080-0xf0ff] has been reserved
<6>[    0.859585] system 00:10: [io  0xf400-0xf47f] has been reserved
<6>[    0.859589] system 00:10: [io  0xf480-0xf4ff] has been reserved
<6>[    0.859592] system 00:10: [io  0xf800-0xf87f] has been reserved
<6>[    0.859596] system 00:10: [io  0xf880-0xf8ff] has been reserved
<7>[    0.859600] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[    0.860706] pnp: PnP ACPI: found 17 devices
<6>[    0.860715] ACPI: ACPI bus type pnp unregistered
<7>[    0.873786] PCI: max bus depth: 3 pci_try_num: 4
<6>[    0.873867] pci 0000:00:0a.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.873871] pci 0000:00:06.0: PCI bridge to [bus 01-01]
<6>[    0.873875] pci 0000:00:06.0:   bridge window [mem 0xb8100000-0xb81fffff]
<6>[    0.873882] pci 0000:02:00.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.873890] pci 0000:03:05.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.873893] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<6>[    0.873898] pci 0000:03:01.0:   bridge window [mem 0xb8300000-0xb83fffff]
<6>[    0.873907] pci 0000:05:00.0: BAR 6: assigned [mem 0xb0000000-0xb000ffff pref]
<6>[    0.873910] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<6>[    0.873913] pci 0000:03:05.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.873918] pci 0000:03:05.0:   bridge window [mem 0xb8400000-0xb84fffff]
<6>[    0.873923] pci 0000:03:05.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.873929] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[    0.873947] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<6>[    0.873959] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<6>[    0.873962] pci 0000:02:00.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.873967] pci 0000:02:00.0:   bridge window [mem 0xb8300000-0xb84fffff]
<6>[    0.873971] pci 0000:02:00.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.873977] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<6>[    0.873980] pci 0000:00:0a.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.873983] pci 0000:00:0a.0:   bridge window [mem 0xb8200000-0xb84fffff]
<6>[    0.873987] pci 0000:00:0a.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.873991] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[    0.874034] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<6>[    0.874068] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<6>[    0.874077] pci 0000:00:0d.0:   bridge window [mem 0xb8500000-0xb85fffff]
<6>[    0.874098] pci 0000:0b:00.0: BAR 6: assigned [mem 0xb8620000-0xb863ffff pref]
<6>[    0.874101] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<6>[    0.874104] pci 0000:00:0f.0:   bridge window [io  0x4000-0x4fff]
<6>[    0.874107] pci 0000:00:0f.0:   bridge window [mem 0xb8600000-0xb86fffff]
<6>[    0.874111] pci 0000:00:0f.0:   bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<6>[    0.874116] pci 0000:80:0d.0: PCI bridge to [bus 81-81]
<7>[    0.874132] pci 0000:00:06.0: setting latency timer to 64
<7>[    0.874137] pci 0000:00:0a.0: setting latency timer to 64
<4>[    0.874759] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 23
<6>[    0.874793] pci 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 23 (level, low) -> IRQ 23
<7>[    0.874797] pci 0000:02:00.0: setting latency timer to 64
<4>[    0.875387] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 22
<6>[    0.875418] pci 0000:03:01.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.875423] pci 0000:03:01.0: setting latency timer to 64
<6>[    0.875430] pci 0000:03:05.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.875435] pci 0000:03:05.0: setting latency timer to 64
<4>[    0.875921] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 21
<6>[    0.875965] pci 0000:03:07.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[    0.875969] pci 0000:03:07.0: setting latency timer to 64
<6>[    0.875977] pci 0000:03:09.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.875981] pci 0000:03:09.0: setting latency timer to 64
<7>[    0.875990] pci 0000:00:0d.0: setting latency timer to 64
<7>[    0.875997] pci 0000:08:00.0: setting latency timer to 64
<6>[    0.876023] pci 0000:08:00.1: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.876028] pci 0000:08:00.1: setting latency timer to 64
<7>[    0.876034] pci 0000:00:0f.0: setting latency timer to 64
<7>[    0.876039] pci 0000:80:0d.0: setting latency timer to 64
<7>[    0.876043] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
<7>[    0.876046] pci_bus 0000:00: resource 5 [io  0x03b0-0x03df]
<7>[    0.876048] pci_bus 0000:00: resource 6 [io  0x03e0-0x0cf7]
<7>[    0.876051] pci_bus 0000:00: resource 7 [io  0x0d00-0x4fff]
<7>[    0.876053] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
<7>[    0.876056] pci_bus 0000:00: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[    0.876059] pci_bus 0000:01: resource 1 [mem 0xb8100000-0xb81fffff]
<7>[    0.876062] pci_bus 0000:01: resource 4 [io  0x0000-0x03af]
<7>[    0.876064] pci_bus 0000:01: resource 5 [io  0x03b0-0x03df]
<7>[    0.876067] pci_bus 0000:01: resource 6 [io  0x03e0-0x0cf7]
<7>[    0.876069] pci_bus 0000:01: resource 7 [io  0x0d00-0x4fff]
<7>[    0.876072] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
<7>[    0.876074] pci_bus 0000:01: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[    0.876077] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
<7>[    0.876080] pci_bus 0000:02: resource 1 [mem 0xb8200000-0xb84fffff]
<7>[    0.876082] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.876085] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
<7>[    0.876088] pci_bus 0000:03: resource 1 [mem 0xb8300000-0xb84fffff]
<7>[    0.876090] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.876093] pci_bus 0000:04: resource 1 [mem 0xb8300000-0xb83fffff]
<7>[    0.876096] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
<7>[    0.876098] pci_bus 0000:05: resource 1 [mem 0xb8400000-0xb84fffff]
<7>[    0.876101] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.876104] pci_bus 0000:08: resource 1 [mem 0xb8500000-0xb85fffff]
<7>[    0.876107] pci_bus 0000:0b: resource 0 [io  0x4000-0x4fff]
<7>[    0.876110] pci_bus 0000:0b: resource 1 [mem 0xb8600000-0xb86fffff]
<7>[    0.876113] pci_bus 0000:0b: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[    0.876116] pci_bus 0000:80: resource 4 [io  0x5000-0xffff]
<7>[    0.876118] pci_bus 0000:80: resource 5 [io  0x03b0-0x03df]
<7>[    0.876121] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
<7>[    0.876124] pci_bus 0000:80: resource 7 [mem 0xc8000000-0xcfffffff]
<6>[    0.876444] NET: Registered protocol family 2
<6>[    0.877069] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[    0.880715] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>[    0.884686] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
<6>[    0.886188] TCP: Hash tables configured (established 524288 bind 65536)
<6>[    0.886191] TCP reno registered
<6>[    0.886292] UDP hash table entries: 4096 (order: 7, 524288 bytes)
<6>[    0.886602] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes)
<6>[    0.887223] NET: Registered protocol family 1
<4>[    0.888026] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
<6>[    0.888060] pci 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<6>[    1.141074] pci 0000:00:02.0: PCI INT A disabled
<4>[    1.141745] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
<6>[    1.141778] pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<6>[    1.141834] pci 0000:00:02.1: PCI INT B disabled
<6>[    1.142119] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    1.142295] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    1.142391] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    1.142497] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    1.142581] pci 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<6>[    1.142634] pci 0000:04:00.0: PCI INT A disabled
<7>[    1.142659] pci 0000:0b:00.0: Boot video device
<6>[    1.142795] pci 0000:80:00.0: Found enabled HT MSI Mapping
<7>[    1.142806] PCI: CLS 64 bytes, default 64
<6>[    1.143312] Trying to unpack rootfs image as initramfs...
<6>[    1.659346] Freeing initrd memory: 20200k freed
<6>[    1.668077] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[    1.668083] Placing 64MB software IO TLB between ffff8800abdde000 - ffff8800afdde000
<6>[    1.668086] software IO TLB at phys 0xabdde000 - 0xafdde000
<6>[    1.668117] Simple Boot Flag at 0x37 set to 0x80
<6>[    1.671040] IBS: LVT offset 1 assigned
<6>[    1.671095] perf: AMD IBS detected (0x00000007)
<6>[    1.671728] audit: initializing netlink socket (disabled)
<5>[    1.671767] type=2000 audit(1368342569.670:1): initialized
<6>[    1.690677] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>[    1.691764] VFS: Disk quotas dquot_6.5.2
<4>[    1.691867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[    1.694075] fuse init (API version 7.17)
<6>[    1.694298] msgmni has been set to 15985
<6>[    1.695361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[    1.695450] io scheduler noop registered
<6>[    1.695452] io scheduler deadline registered
<6>[    1.695574] io scheduler cfq registered (default)
<7>[    1.696190] pcieport 0000:00:0a.0: setting latency timer to 64
<7>[    1.696255] pcieport 0000:00:0a.0: irq 64 for MSI/MSI-X
<7>[    1.696399] pcieport 0000:00:0d.0: setting latency timer to 64
<7>[    1.696468] pcieport 0000:00:0d.0: irq 65 for MSI/MSI-X
<7>[    1.696590] pcieport 0000:00:0f.0: setting latency timer to 64
<7>[    1.696648] pcieport 0000:00:0f.0: irq 66 for MSI/MSI-X
<7>[    1.696794] pcieport 0000:02:00.0: setting latency timer to 64
<7>[    1.696895] pcieport 0000:02:00.0: irq 67 for MSI/MSI-X
<7>[    1.697094] pcieport 0000:03:01.0: setting latency timer to 64
<7>[    1.697195] pcieport 0000:03:01.0: irq 68 for MSI/MSI-X
<7>[    1.697363] pcieport 0000:03:05.0: setting latency timer to 64
<7>[    1.697437] pcieport 0000:03:05.0: irq 69 for MSI/MSI-X
<7>[    1.697642] pcieport 0000:03:07.0: setting latency timer to 64
<7>[    1.697745] pcieport 0000:03:07.0: irq 70 for MSI/MSI-X
<7>[    1.697901] pcieport 0000:03:09.0: setting latency timer to 64
<7>[    1.697995] pcieport 0000:03:09.0: irq 71 for MSI/MSI-X
<7>[    1.698255] pcieport 0000:80:0d.0: setting latency timer to 64
<7>[    1.698317] pcieport 0000:80:0d.0: irq 72 for MSI/MSI-X
<6>[    1.698905] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
<6>[    1.698908] vesafb: scrolling: redraw
<6>[    1.698911] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
<6>[    1.699742] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90009c80000, using 5120k, total 5120k
<6>[    1.714978] Console: switching to colour frame buffer device 160x64
<6>[    1.728981] fb0: VESA VGA frame buffer device
<6>[    1.729310] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
<6>[    1.729319] ACPI: Power Button [PWRB]
<6>[    1.729524] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>[    1.729529] ACPI: Power Button [PWRF]
<6>[    1.740290] ERST: Table is not found!
<6>[    1.740292] GHES: HEST is not enabled!
<6>[    1.740485] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[    1.761237] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[    2.071842] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[    2.081682] Linux agpgart interface v0.103
<6>[    2.088102] brd: module loaded
<6>[    2.090758] loop: module loaded
<6>[    2.090829] hwlat_detector: version 1.0.0
<7>[    2.092131] ahci 0000:05:00.0: version 3.0
<6>[    2.092150] ahci 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    2.092294] ahci 0000:05:00.0: irq 73 for MSI/MSI-X
<6>[    2.092451] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    2.092456] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
<7>[    2.092461] ahci 0000:05:00.0: setting latency timer to 64
<6>[    2.093503] scsi0 : ahci
<6>[    2.093880] scsi1 : ahci
<6>[    2.094082] ata1: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400100 irq 73
<6>[    2.094086] ata2: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400180 irq 73
<7>[    2.094486] pata_acpi 0000:00:04.0: setting latency timer to 64
<4>[    2.094987] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 18
<6>[    2.095042] pata_acpi 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<7>[    2.095143] pata_acpi 0000:00:05.0: setting latency timer to 64
<6>[    2.095160] pata_acpi 0000:00:05.0: PCI INT A disabled
<4>[    2.095636] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 17
<6>[    2.095676] pata_acpi 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<7>[    2.095780] pata_acpi 0000:00:05.1: setting latency timer to 64
<6>[    2.095796] pata_acpi 0000:00:05.1: PCI INT B disabled
<4>[    2.096250] ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 16
<6>[    2.096295] pata_acpi 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<7>[    2.096396] pata_acpi 0000:00:05.2: setting latency timer to 64
<6>[    2.096412] pata_acpi 0000:00:05.2: PCI INT C disabled
<6>[    2.098343] Fixed MDIO Bus: probed
<6>[    2.098449] tun: Universal TUN/TAP device driver, 1.6
<6>[    2.098451] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    2.098597] PPP generic driver version 2.4.2
<6>[    2.098972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    2.098999] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<7>[    2.099036] ehci_hcd 0000:00:02.1: setting latency timer to 64
<6>[    2.099039] ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>[    2.099189] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
<6>[    2.099240] ehci_hcd 0000:00:02.1: debug port 1
<7>[    2.099247] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
<6>[    2.099365] ehci_hcd 0000:00:02.1: irq 19, io mem 0xb8005000
<6>[    2.105034] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
<6>[    2.105385] hub 1-0:1.0: USB hub found
<6>[    2.105396] hub 1-0:1.0: 10 ports detected
<6>[    2.105672] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    2.105702] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<7>[    2.105722] ohci_hcd 0000:00:02.0: setting latency timer to 64
<6>[    2.105725] ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>[    2.105860] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
<6>[    2.105997] ohci_hcd 0000:00:02.0: irq 20, io mem 0xb8004000
<6>[    2.159387] hub 2-0:1.0: USB hub found
<6>[    2.159407] hub 2-0:1.0: 10 ports detected
<6>[    2.159678] uhci_hcd: USB Universal Host Controller Interface driver
<6>[    2.159838] xhci_hcd 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    2.159858] xhci_hcd 0000:04:00.0: setting latency timer to 64
<6>[    2.159870] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[    2.160028] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
<7>[    2.160327] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
<7>[    2.160359] xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
<7>[    2.160384] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
<7>[    2.160417] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
<7>[    2.160437] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
<7>[    2.160477] xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
<7>[    2.160493] xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X
<7>[    2.160537] xhci_hcd 0000:04:00.0: irq 81 for MSI/MSI-X
<7>[    2.161717] xHCI xhci_add_endpoint called for root hub
<7>[    2.161720] xHCI xhci_check_bandwidth called for root hub
<6>[    2.161808] hub 3-0:1.0: USB hub found
<6>[    2.161822] hub 3-0:1.0: 2 ports detected
<6>[    2.162033] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[    2.162172] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
<7>[    2.163808] xHCI xhci_add_endpoint called for root hub
<7>[    2.163810] xHCI xhci_check_bandwidth called for root hub
<6>[    2.163899] hub 4-0:1.0: USB hub found
<6>[    2.163926] hub 4-0:1.0: 2 ports detected
<6>[    2.176167] usbcore: registered new interface driver libusual
<6>[    2.176297] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>[    2.179464] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[    2.179479] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[    2.179984] mousedev: PS/2 mouse device common for all mice
<6>[    2.180561] rtc_cmos 00:0a: RTC can wake from S4
<6>[    2.180893] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
<6>[    2.181081] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
<6>[    2.181361] device-mapper: uevent: version 1.0.3
<6>[    2.181566] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[    2.181570] cpuidle: using governor ladder
<6>[    2.181572] cpuidle: using governor menu
<6>[    2.181575] EFI Variables Facility v0.08 2004-May-17
<6>[    2.182361] TCP cubic registered
<6>[    2.182600] NET: Registered protocol family 10
<6>[    2.184074] NET: Registered protocol family 17
<5>[    2.184127] Registering the dns_resolver key type
<7>[    2.184508] PM: Hibernation image not present or could not be loaded.
<6>[    2.184553] registered taskstats version 1
<6>[    2.198899]   Magic number: 13:251:167
<6>[    2.199044] acpi device:30: hash matches
<6>[    2.199064] acpi PNP0000:00: hash matches
<6>[    2.199175] rtc_cmos 00:0a: setting system clock to 2013-05-12 07:09:31 UTC (1368342571)
<6>[    2.199179] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
<6>[    2.199181] EDD information not available.
<6>[    2.201190] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
<6>[    2.399092] ata2: SATA link down (SStatus 0 SControl 330)
<6>[    2.458062] usb 1-7: new high-speed USB device number 3 using ehci_hcd
<6>[    2.554052] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    2.565855] ata1.00: ATA-8: KINGSTON SVP200S37A60G, 502ABBF0, max UDMA/133
<6>[    2.565858] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    2.575763] ata1.00: configured for UDMA/133
<5>[    2.576050] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SVP200S 502A PQ: 0 ANSI: 5
<5>[    2.576499] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
<5>[    2.576558] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    2.576628] sd 0:0:0:0: [sda] Write Protect is off
<7>[    2.576631] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    2.576668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    2.577835]  sda: sda1 sda4
<5>[    2.578568] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    2.584786] Freeing unused kernel memory: 2816k freed
<6>[    2.586125] Write protecting the kernel read-only data: 10240k
<6>[    2.590481] Freeing unused kernel memory: 916k freed
<6>[    2.596675] Freeing unused kernel memory: 1288k freed
<30>[    2.634466] udevd[155]: starting version 175
<6>[    2.670069] Refined TSC clocksource calibration: 2299.999 MHz.
<6>[    2.670078] Switching to clocksource tsc
<6>[    2.775329] Floppy drive(s): fd0 is 1.44M
<6>[    2.789894] FDC 0 is a post-1991 82077
<7>[    2.832828] pata_amd 0000:00:04.0: version 0.4.1
<7>[    2.832949] pata_amd 0000:00:04.0: setting latency timer to 64
<6>[    2.854539] scsi2 : pata_amd
<6>[    2.857353] scsi3 : pata_amd
<4>[    2.857895] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 23
<6>[    2.857901] firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNK1] -> GSI 23 (level, low) -> IRQ 23
<6>[    2.861494] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14
<6>[    2.861497] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15
<7>[    2.861725] sata_nv 0000:00:05.0: version 3.5
<6>[    2.861735] sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<5>[    2.861738] sata_nv 0000:00:05.0: Using SWNCQ mode
<7>[    2.862016] sata_nv 0000:00:05.0: setting latency timer to 64
<6>[    2.875466] scsi4 : sata_nv
<6>[    2.878252] scsi5 : sata_nv
<6>[    2.881173] ata5: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 18
<6>[    2.881177] ata6: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 18
<6>[    2.881367] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
<4>[    2.881811] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
<6>[    2.881817] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
<7>[    2.881822] forcedeth 0000:00:08.0: setting latency timer to 64
<5>[    2.908174] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
<6>[    3.015271] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
<7>[    3.015282] ata3: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
<6>[    3.021193] ata3.00: configured for UDMA/33
<5>[    3.027114] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL00 PQ: 0 ANSI: 5
<4>[    3.033530] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[    3.033536] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[    3.033955] sr 2:0:0:0: Attached scsi CD-ROM sr0
<5>[    3.034268] sr 2:0:0:0: Attached scsi generic sg1 type 5
<7>[    3.034499] ata4: port disabled--ignoring
<6>[    3.164041] usb 2-5: new low-speed USB device number 2 using ohci_hcd
<6>[    3.184042] ata5: SATA link down (SStatus 0 SControl 300)
<6>[    3.405190] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:b1:66:70
<6>[    3.405195] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<6>[    3.405262] sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<5>[    3.405266] sata_nv 0000:00:05.1: Using SWNCQ mode
<7>[    3.405585] sata_nv 0000:00:05.1: setting latency timer to 64
<6>[    3.409757] scsi6 : sata_nv
<5>[    3.409930] firewire_core: created device fw0: GUID 00e0810000283c52, S400
<6>[    3.411326] scsi7 : sata_nv
<6>[    3.411896] ata7: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 17
<6>[    3.411900] ata8: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 17
<4>[    3.412468] ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 21
<6>[    3.412473] forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 21 (level, low) -> IRQ 21
<7>[    3.412477] forcedeth 0000:00:09.0: setting latency timer to 64
<6>[    3.624039] usb 2-8: new full-speed USB device number 3 using ohci_hcd
<6>[    3.638042] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    3.642086] ata6.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    3.642090] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    3.646088] ata6.00: configured for UDMA/133
<5>[    3.646281] scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    3.646632] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    3.646724] sd 5:0:0:0: [sdb] Write Protect is off
<5>[    3.646728] sd 5:0:0:0: Attached scsi generic sg2 type 0
<7>[    3.646733] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    3.646772] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    3.660235]  sdb: sdb1
<5>[    3.660717] sd 5:0:0:0: [sdb] Attached SCSI disk
<6>[    3.823169] hub 2-8:1.0: USB hub found
<6>[    3.826078] hub 2-8:1.0: 4 ports detected
<6>[    3.865037] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    3.868353] ata7.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    3.868357] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    3.871358] ata7.00: configured for UDMA/133
<5>[    3.871555] scsi 6:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    3.871996] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    3.872092] sd 6:0:0:0: [sdc] Write Protect is off
<7>[    3.872094] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
<5>[    3.872132] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    3.872431] sd 6:0:0:0: Attached scsi generic sg3 type 0
<6>[    3.886203]  sdc: sdc1
<5>[    3.886719] sd 6:0:0:0: [sdc] Attached SCSI disk
<6>[    3.935160] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b1:66:71
<6>[    3.935164] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<6>[    3.935225] sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<5>[    3.935229] sata_nv 0000:00:05.2: Using SWNCQ mode
<7>[    3.935489] sata_nv 0000:00:05.2: setting latency timer to 64
<6>[    3.936382] scsi8 : sata_nv
<6>[    3.936596] scsi9 : sata_nv
<6>[    3.936993] ata9: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 16
<6>[    3.936996] ata10: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 16
<6>[    4.034246] md: bind<sdc1>
<6>[    4.327056] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[    4.331049] ata8.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    4.331052] ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    4.335043] ata8.00: configured for UDMA/133
<5>[    4.335236] scsi 7:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    4.335685] sd 7:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    4.335785] sd 7:0:0:0: [sdd] Write Protect is off
<7>[    4.335789] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
<5>[    4.335814] sd 7:0:0:0: Attached scsi generic sg4 type 0
<5>[    4.335828] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    4.348677]  sdd: sdd1
<5>[    4.349192] sd 7:0:0:0: [sdd] Attached SCSI disk
<6>[    4.391043] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    4.395165] ata9.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    4.395169] ata9.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    4.399167] ata9.00: configured for UDMA/133
<5>[    4.399349] scsi 8:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    4.399777] sd 8:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    4.399864] sd 8:0:0:0: [sde] Write Protect is off
<7>[    4.399867] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
<5>[    4.399904] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    4.400068] sd 8:0:0:0: Attached scsi generic sg5 type 0
<6>[    4.406143]  sde: sde1
<5>[    4.406623] sd 8:0:0:0: [sde] Attached SCSI disk
<6>[    4.487425] md: bind<sdd1>
<6>[    4.558395] md: bind<sde1>
<6>[    4.703038] ata10: SATA link down (SStatus 0 SControl 300)
<6>[    4.713654] [drm] Initialized drm 1.1.0 20060810
<6>[    4.720600] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input3
<6>[    4.724753] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-5/input0
<6>[    4.725319] usbcore: registered new interface driver usbhid
<6>[    4.725322] usbhid: USB HID core driver
<6>[    4.736527] [drm] radeon defaulting to kernel modesetting.
<6>[    4.736531] [drm] radeon kernel modesetting enabled.
<7>[    4.736897] checking generic (c0000000 500000) vs hw (c0000000 8000000)
<6>[    4.736901] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
<6>[    4.736958] Console: switching to colour dummy device 80x25
<6>[    4.741993] radeon 0000:0b:00.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[    4.742000] radeon 0000:0b:00.0: setting latency timer to 64
<6>[    4.743867] [drm] initializing kernel modesetting (RV380 0x1002:0x5B63 0x0001:0x0001).
<6>[    4.743910] [drm] register mmio base: 0xB8600000
<6>[    4.743912] [drm] register mmio size: 65536
<6>[    4.744337] [drm] Generation 2 PCI interface, using max accessible memory
<6>[    4.744343] radeon 0000:0b:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
<6>[    4.744346] radeon 0000:0b:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
<6>[    4.744369] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
<6>[    4.744371] [drm] Driver supports precise vblank timestamp query.
<7>[    4.744425] radeon 0000:0b:00.0: irq 82 for MSI/MSI-X
<6>[    4.744430] radeon 0000:0b:00.0: radeon: using MSI.
<6>[    4.744556] [drm] radeon: irq initialized.
<6>[    4.748671] [drm] Detected VRAM RAM=128M, BAR=128M
<6>[    4.748675] [drm] RAM width 64bits DDR
<6>[    4.749248] [TTM] Zone  kernel: Available graphics memory: 4094804 kiB.
<6>[    4.749250] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
<6>[    4.749253] [TTM] Initializing pool allocator.
<6>[    4.749489] [drm] radeon: 128M of VRAM memory ready
<6>[    4.749497] [drm] radeon: 512M of GTT memory ready.
<6>[    4.749555] [drm] GART: num cpu pages 131072, num gpu pages 131072
<6>[    4.756025] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
<6>[    4.756950] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
<6>[    4.756995] radeon 0000:0b:00.0: WB enabled
<6>[    4.757142] [drm] Loading R300 Microcode
<6>[    4.760310] [drm] radeon: ring at 0x00000000A0001000
<6>[    4.760332] [drm] ring test succeeded in 1 usecs
<6>[    4.760563] [drm] radeon: ib pool ready.
<6>[    4.760769] [drm] ib test succeeded in 0 usecs
<6>[    4.762020] [drm] Radeon Display Connectors
<6>[    4.762023] [drm] Connector 0:
<6>[    4.762025] [drm]   VGA
<6>[    4.762028] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
<6>[    4.762030] [drm]   Encoders:
<6>[    4.762032] [drm]     CRT1: INTERNAL_DAC1
<6>[    4.762034] [drm] Connector 1:
<6>[    4.762035] [drm]   DVI-I
<6>[    4.762037] [drm]   HPD1
<6>[    4.762039] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
<6>[    4.762041] [drm]   Encoders:
<6>[    4.762042] [drm]     CRT2: INTERNAL_DAC2
<6>[    4.762044] [drm]     DFP1: INTERNAL_TMDS1
<6>[    4.762046] [drm] Connector 2:
<6>[    4.762047] [drm]   S-video
<6>[    4.762049] [drm]   Encoders:
<6>[    4.762050] [drm]     TV1: INTERNAL_DAC2
<6>[    4.841936] [drm] fb mappable at 0xC00C0000
<6>[    4.841938] [drm] vram apper at 0xC0000000
<6>[    4.841940] [drm] size 8294400
<6>[    4.841942] [drm] fb depth is 24
<6>[    4.841943] [drm]    pitch is 7680
<6>[    4.842130] fbcon: radeondrmfb (fb0) is primary device
<6>[    4.845161] md: bind<sdb1>
<6>[    4.849953] async_tx: api initialized (async)
<4>[    4.867045] raid6: int64x1   2187 MB/s
<4>[    4.884120] raid6: int64x2   2191 MB/s
<6>[    4.892729] Console: switching to colour frame buffer device 240x67
<4>[    4.901078] raid6: int64x4   1832 MB/s
<6>[    4.902097] fb0: radeondrmfb frame buffer device
<6>[    4.902099] drm: registered panic notifier
<6>[    4.902107] [drm] Initialized radeon 2.12.0 20080528 for 0000:0b:00.0 on minor 0
<4>[    4.918021] raid6: int64x8   1140 MB/s
<4>[    4.935060] raid6: sse2x1    3101 MB/s
<4>[    4.952026] raid6: sse2x2    5261 MB/s
<4>[    4.969040] raid6: sse2x4    5753 MB/s
<4>[    4.969042] raid6: using algorithm sse2x4 (5753 MB/s)
<6>[    4.970144] xor: automatically using best checksumming function: generic_sse
<6>[    4.975020]    generic_sse:  8824.000 MB/sec
<6>[    4.975022] xor: using function: generic_sse (8824.000 MB/sec)
<6>[    4.976547] md: raid6 personality registered for level 6
<6>[    4.976550] md: raid5 personality registered for level 5
<6>[    4.976553] md: raid4 personality registered for level 4
<6>[    4.976831] bio: create slab <bio-1> at 1
<6>[    4.976923] md/raid:md1: device sdb1 operational as raid disk 0
<6>[    4.976926] md/raid:md1: device sde1 operational as raid disk 3
<6>[    4.976928] md/raid:md1: device sdd1 operational as raid disk 2
<6>[    4.976931] md/raid:md1: device sdc1 operational as raid disk 1
<6>[    4.978633] md/raid:md1: allocated 4300kB
<6>[    4.978714] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
<7>[    4.978716] RAID conf printout:
<7>[    4.978718]  --- level:5 rd:4 wd:4
<7>[    4.978720]  disk 0, o:1, dev:sdb1
<7>[    4.978722]  disk 1, o:1, dev:sdc1
<7>[    4.978724]  disk 2, o:1, dev:sdd1
<7>[    4.978726]  disk 3, o:1, dev:sde1
<6>[    4.978784] md1: detected capacity change from 0 to 1500317024256
<6>[    4.982605]  md1: unknown partition table
<6>[    6.172877] md: linear personality registered for level -1
<6>[    6.176123] md: multipath personality registered for level -4
<6>[    6.179176] md: raid0 personality registered for level 0
<6>[    6.182890] md: raid1 personality registered for level 1
<6>[    6.195443] md: raid10 personality registered for level 10
<6>[    6.316708] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<4>[    6.578112] init: ureadahead main process (446) terminated with status 5
<6>[    6.668603] Adding 8283024k swap on /dev/sda4.  Priority:-1 extents:1 across:8283024k SS
<6>[    6.731950] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
<4>[    6.825319] init: portmap-wait (statd) main process (605) killed by TERM signal
<4>[    6.840892] init: statd-mounting main process (588) killed by TERM signal
<6>[    6.864104] RPC: Registered named UNIX socket transport module.
<6>[    6.864109] RPC: Registered udp transport module.
<6>[    6.864111] RPC: Registered tcp transport module.
<6>[    6.864114] RPC: Registered tcp NFSv4.1 backchannel transport module.
<5>[    6.868456] FS-Cache: Loaded
<5>[    6.878471] FS-Cache: Netfs 'nfs' registered for caching
<6>[    7.033463] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
<6>[    7.744597] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>[    7.759884] init: flush-early-job-log main process (766) terminated with status 1
<30>[    7.765264] udevd[781]: starting version 175
<6>[    7.888105] i2c i2c-3: nForce2 SMBus adapter at 0x2440
<6>[    7.890808] i2c i2c-4: nForce2 SMBus adapter at 0x2400
<4>[    7.892195] init: bluetooth main process (811) terminated with status 1
<4>[    7.892244] init: bluetooth main process ended, respawning
<6>[    7.893042] i2c i2c-5: nForce2 SMBus adapter at 0x5440
<6>[    7.897169] i2c i2c-6: nForce2 SMBus adapter at 0x5400
<6>[    7.902830] NV_TCO: NV TCO WatchDog Timer Driver v0.01
<6>[    7.909582] NV_TCO: Watchdog reboot not detected.
<6>[    7.918200] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
<4>[    7.967198] init: bluetooth main process (916) terminated with status 1
<4>[    7.967248] init: bluetooth main process ended, respawning
<4>[    8.043206] init: bluetooth main process (972) terminated with status 1
<4>[    8.043257] init: bluetooth main process ended, respawning
<4>[    8.124210] init: bluetooth main process (1036) terminated with status 1
<4>[    8.124261] init: bluetooth main process ended, respawning
<4>[    8.197180] init: bluetooth main process (1061) terminated with status 1
<4>[    8.197226] init: bluetooth main process ended, respawning
<4>[    8.266175] init: bluetooth main process (1096) terminated with status 1
<4>[    8.266229] init: bluetooth main process ended, respawning
<4>[    8.338233] init: bluetooth main process (1132) terminated with status 1
<4>[    8.338291] init: bluetooth main process ended, respawning
<6>[    8.341151] MCE: In-kernel MCE decoding enabled.
<3>[    8.343970] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
<3>[    8.344749] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
<6>[    8.351361] EDAC MC: Ver: 2.1.0
<6>[    8.359548] AMD64 EDAC driver v3.4.0
<6>[    8.359987] EDAC amd64: DRAM ECC enabled.
<6>[    8.360000] EDAC amd64: F10h detected (node 0).
<7>[    8.360055] EDAC MC: DCT0 chip selects:
<6>[    8.360058] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    8.360064] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    8.360069] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    8.360074] EDAC amd64: MC: 6:     0MB 7:     0MB
<7>[    8.360079] EDAC MC: DCT1 chip selects:
<6>[    8.360084] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    8.360089] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    8.360095] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    8.360100] EDAC amd64: MC: 6:     0MB 7:     0MB
<6>[    8.360105] EDAC amd64: using x4 syndromes.
<6>[    8.360110] EDAC amd64: MCT channel count: 2
<6>[    8.361838] EDAC amd64: CS0: Registered DDR2 RAM
<6>[    8.361841] EDAC amd64: CS2: Registered DDR2 RAM
<6>[    8.365892] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
<6>[    8.366336] EDAC amd64: DRAM ECC enabled.
<6>[    8.366352] EDAC amd64: F10h detected (node 1).
<7>[    8.366395] EDAC MC: DCT0 chip selects:
<6>[    8.366398] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    8.366400] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    8.366402] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    8.366405] EDAC amd64: MC: 6:     0MB 7:     0MB
<7>[    8.366406] EDAC MC: DCT1 chip selects:
<6>[    8.366408] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    8.366410] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    8.366412] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    8.366414] EDAC amd64: MC: 6:     0MB 7:     0MB
<6>[    8.366420] EDAC amd64: using x4 syndromes.
<6>[    8.366422] EDAC amd64: MCT channel count: 2
<6>[    8.368066] EDAC amd64: CS0: Registered DDR2 RAM
<6>[    8.368069] EDAC amd64: CS2: Registered DDR2 RAM
<6>[    8.369607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[    8.372694] EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
<6>[    8.377129] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
<6>[    8.382726] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<4>[    8.404240] init: bluetooth main process (1171) terminated with status 1
<4>[    8.404295] init: bluetooth main process ended, respawning
<4>[    8.461459] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
<6>[    8.461469] snd_hda_intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
<6>[    8.461479] hda_intel: Disabling MSI
<7>[    8.461639] snd_hda_intel 0000:00:06.1: setting latency timer to 64
<4>[    8.479216] init: bluetooth main process (1218) terminated with status 1
<4>[    8.479263] init: bluetooth main process ended, respawning
<4>[    8.559244] init: bluetooth main process (1268) terminated with status 1
<4>[    8.559301] init: bluetooth main process ended, respawning
<4>[    8.620237] init: bluetooth main process (1316) terminated with status 1
<4>[    8.620285] init: bluetooth respawning too fast, stopped
<5>[    8.655271] type=1400 audit(1368342577.955:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=856 comm="apparmor_parser"
<5>[    8.656670] type=1400 audit(1368342577.956:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=856 comm="apparmor_parser"
<6>[    8.716442] hda_codec: ALC262: SKU not ready 0x411111f0
<6>[    8.728235] Linux video capture interface: v2.00
<5>[    8.857593] type=1400 audit(1368342578.157:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1199 comm="apparmor_parser"
<5>[    8.858671] type=1400 audit(1368342578.158:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1199 comm="apparmor_parser"
<5>[    8.859562] type=1400 audit(1368342578.159:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1199 comm="apparmor_parser"
<6>[    8.870617] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input4
<5>[    8.906479] type=1400 audit(1368342578.206:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1213 comm="apparmor_parser"
<5>[    8.908237] type=1400 audit(1368342578.208:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1213 comm="apparmor_parser"
<5>[    8.909992] type=1400 audit(1368342578.209:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1213 comm="apparmor_parser"
<4>[    9.103709] init: failsafe main process (1495) killed by TERM signal
<7>[    9.303511] forcedeth 0000:00:08.0: irq 83 for MSI/MSI-X
<5>[    9.393152] type=1400 audit(1368342578.693:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/clamd" pid=1581 comm="apparmor_parser"
<7>[    9.403422] forcedeth 0000:00:09.0: irq 84 for MSI/MSI-X
<6>[    9.405244] forcedeth 0000:00:09.0: eth1: no link during initialization
<6>[    9.410438] ADDRCONF(NETDEV_UP): eth1: link is not ready
<5>[    9.476470] type=1400 audit(1368342578.776:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1575 comm="apparmor_parser"
<3>[    9.827192] 3:3:2: cannot set freq 24000 to ep 0x86
<3>[   10.827298] 3:3:3: cannot set freq 32000 to ep 0x86
<3>[   11.827181] 3:3:4: cannot set freq 48000 to ep 0x86
<6>[   11.828418] usbcore: registered new interface driver snd-usb-audio
<6>[   11.828451] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
<6>[   11.843117] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7:1.0/input/input5
<6>[   11.843347] usbcore: registered new interface driver uvcvideo
<6>[   11.843350] USB Video Class driver (1.1.1)
<4>[   19.932395] audit_printk_skb: 33 callbacks suppressed
<5>[   19.932399] type=1400 audit(1368342589.232:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1577 comm="apparmor_parser"
<5>[   19.933071] type=1400 audit(1368342589.233:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1577 comm="apparmor_parser"
<5>[   19.933421] type=1400 audit(1368342589.233:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1577 comm="apparmor_parser"
<5>[   19.934405] type=1400 audit(1368342589.234:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1577 comm="apparmor_parser"
<5>[   19.934916] type=1400 audit(1368342589.234:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1577 comm="apparmor_parser"
<5>[   19.935276] type=1400 audit(1368342589.235:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1577 comm="apparmor_parser"
<5>[   19.936397] type=1400 audit(1368342589.236:29): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1577 comm="apparmor_parser"
<5>[   19.936765] type=1400 audit(1368342589.236:30): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1577 comm="apparmor_parser"
<6>[   20.122204] kvm: Nested Virtualization enabled
<6>[   20.122216] kvm: Nested Paging enabled
<7>[   21.342304] vboxdrv: Found 8 processor cores.
<4>[   21.342897] vboxdrv: fAsync=0 offMin=0x417 offMax=0x431c
<6>[   21.343244] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
<7>[   21.343247] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
<6>[   21.362456] vboxpci: IOMMU not found (not registered)
<4>[   22.106903] init: plymouth-stop pre-start process (2935) terminated with status 1

Ubuntu 14.04 sur 1001HA / Ubuntu 12.04 E6600 et K50IE
M.A.O. UbuntuStudio 12.04 sur Tyan S2915E RAID 5
Pourquoi Linux.
Bug -1 : Derrière chaque bogue se cache constamment la faille humaine !

Hors ligne

#86 Le 12/05/2013, à 11:31

fcn50

Re : demarrage en 25 sec

@moko138: Pourquoi pas /data en ntfs et pourquoi y a-t-il deux /home alors qu'un encrypté suffit, non? Tu as droit 5 partitions primaires avec table msdos.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne

#87 Le 12/05/2013, à 12:40

moko138

Re : demarrage en 25 sec

faucon50 a écrit :

@moko138: Pourquoi pas /data en ntfs?

  Et pourquoi pas en fat32 ? Les très rares fois où j'ai envisagé d'avoir un .iso plus gros que 4 Go, j'ai fait de la place dans /home.

faucon50 a écrit :

pourquoi y a-t-il deux /home alors qu'un encrypté suffit, non?

Il y a un unique /home en sda9, qui contient (ligne suivante), crypté, mon /home/perso et qui pourrait accueillir d'autres utilisateurs (sur d'autres lignes suivantes).

faucon50 a écrit :

Tu as droit 5 partitions primaires avec table msdos.

  Non ; quatre dont une étendue.
Et même si je renonçais - mais pourquoi ??? - à /data, il manquerait la swap de linux, qui me sert à hiberner.

  Et, comme le rappelle à mots couverts, gentiment, L_d_v_c@, le sujet de ce fil c'est l'accélération du démarrage. Si tu as d'autres suggestions ou réponses qui ne s'y inscriraient pas, je t'invite à me contacter par MP.

Hors ligne

#88 Le 12/05/2013, à 12:53

fcn50

Re : demarrage en 25 sec

moko138 a écrit :

Et, comme le rappelle à mots couverts, gentiment, L_d_v_c@, le sujet de ce fil c'est l'accélération du démarrage. Si tu as d'autres suggestions ou réponses qui ne s'y inscriraient pas, je t'invite à me contacter par MP.

Enlever NM, lightdm et blacklister tous les modules non utilisés. Regarder /syslog, /boot.log et ~/.xession-errors pour supprimer d'éventuelles erreurs.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne

#89 Le 12/05/2013, à 13:00

L_d_v_c@

Re : demarrage en 25 sec

faucon50 a écrit :

Enlever NM, lightdm et blacklister tous les modules non utilisés. Regarder /syslog, /boot.log et ~/.xession-errors pour supprimer d'éventuelles erreurs.

Merci c'est gentil. Bon, en fait, le noyau RT recompilé ne me permettait pas de faire la musique en 192 kHz non plus (quelques Xruns). J'ai donc décidé de ne travailler qu'en 96 kHz. J'ai retiré le noyau RT et le noyau lowlatency a repris sa place.
édit : boot en 9 secondes après avoir retiré kvm.

Dernière modification par L_d_v_c@ (Le 12/05/2013, à 13:11)


Ubuntu 14.04 sur 1001HA / Ubuntu 12.04 E6600 et K50IE
M.A.O. UbuntuStudio 12.04 sur Tyan S2915E RAID 5
Pourquoi Linux.
Bug -1 : Derrière chaque bogue se cache constamment la faille humaine !

Hors ligne

#90 Le 12/05/2013, à 13:21

moko138

Re : demarrage en 25 sec

@L_d_v_c@ : 8'', bravo !

faucon50 a écrit :

Enlever NM, lightdm et blacklister tous les modules non utilisés. Regarder /syslog, /boot.log et ~/.xession-errors pour supprimer d'éventuelles erreurs.

  Je me sers constamment de network-manager pour les hotspots (pas de box).
  Je n'ai pas lightdm.
  Comment identifie-t-on les modules non utilisés, s'il te plaït ?

Hors ligne

#91 Le 12/05/2013, à 13:36

L_d_v_c@

Re : demarrage en 25 sec

moko138 a écrit :

@L_d_v_c@ : 8'', bravo !

Hé hé oui ! d'après dmesg mais il passe une trentaine de secondes dans le bios avant d'arriver à Grub, revu et revu !

édit : j'ai relu ce n'est pas clair.

Dernière modification par L_d_v_c@ (Le 12/05/2013, à 14:08)


Ubuntu 14.04 sur 1001HA / Ubuntu 12.04 E6600 et K50IE
M.A.O. UbuntuStudio 12.04 sur Tyan S2915E RAID 5
Pourquoi Linux.
Bug -1 : Derrière chaque bogue se cache constamment la faille humaine !

Hors ligne

#92 Le 12/05/2013, à 13:49

Haleth

Re : demarrage en 25 sec

J'pense pas, non
Le dmesg ne te donneras que les trucs du kernel, donc après l'étape grub, et donc bien après l'étape bios


Ubuntu is an ancien African word which means "I can't configure Debian"

Because accessor & mutator are against encapsulation (one of OOP principles), good OOP-programmers do not use them. Obviously, procedural-devs do not. In fact, only ugly-devs are still using them.

Hors ligne

#93 Le 12/05/2013, à 14:07

L_d_v_c@

Re : demarrage en 25 sec

Haleth a écrit :

J'pense pas, non
Le dmesg ne te donneras que les trucs du kernel, donc après l'étape grub, et donc bien après l'étape bios

Oui, merci je viens de relire ma phrase.
D'après dmesg, il démarre en 8 à 9 secondes (à partir de Grub je suppose) après avoir passé une trentaine de secondes dans le BIOS.

Donc le temps de mettre le mot de passe, il faut compter une minute contre une minute et demie avant.


Ubuntu 14.04 sur 1001HA / Ubuntu 12.04 E6600 et K50IE
M.A.O. UbuntuStudio 12.04 sur Tyan S2915E RAID 5
Pourquoi Linux.
Bug -1 : Derrière chaque bogue se cache constamment la faille humaine !

Hors ligne

#94 Le 12/05/2013, à 18:09

david69

Re : demarrage en 25 sec

a faucon50 en reponse & #79,

dvd@dvd:~$ df -h
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda1           54G     28G   24G  54% /
none               4,0K       0  4,0K   0% /sys/fs/cgroup
udev               490M    4,0K  490M   1% /dev
tmpfs              100M    788K   99M   1% /run
none               5,0M       0  5,0M   0% /run/lock
none               498M     72K  498M   1% /run/shm
none               100M     12K  100M   1% /run/user

(vous ne chomez pas le dimanche matin, des 8:30!)


lenovo G580 - 64 bits - Lubuntu 14.04.01 - merci à tous ceux qui aident
FB Chacolinks ong

Hors ligne

#95 Le 12/05/2013, à 18:48

fcn50

Re : demarrage en 25 sec

@moko138: Tu as gdm sur la 10.04 encore plus lourd que lightdm. A ta place je commencerais par installer la 12.04 LTS avec un bon partitionnement. Pour les modules qui sont sur ton système: lsmod, recherche à quoi ils correspondent et si tu en as vraiment l'utilité.

L_d_v_c@ a écrit :

D'après dmesg, il démarre en 8 à 9 secondes (à partir de Grub je suppose) après avoir passé une trentaine de secondes dans le BIOS.

Donc le temps de mettre le mot de passe, il faut compter une minute contre une minute et demie avant.

C'est déjà pas mal. Pour le BIOS y'a rien à faire...

david69 a écrit :

(vous ne chomez pas le dimanche matin, des 8:30!)

Il parait que le monde appartient à ceux qui se lèvent tôt... Enfin, c'est ce que font croire ceux qui se lèvent plus tard et les dirigent. smile

Ton df -h sonne juste pour install et partitionnement automatique. Tu as déjà fais les quelques suggestions proposées dans ce fil, si oui, lesquelles?

Dernière modification par faucon50 (Le 12/05/2013, à 18:51)


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne

#96 Le 12/05/2013, à 19:08

moko138

Re : demarrage en 25 sec

@faucon50 : merci de ces tuyaux.
  J'ai prévu, à regrets, de passer à la 12.04, puisque la 10.04 va ne plus être suivie. Je l'avais même installé, la 12.04, sur un DDE... qui m'a lâché la semaine dernière.
Cela dit, cinq minutes après le démarrage, la ram de la 10.04, n'est occupée qu'à 190 Mo...

Hors ligne

#97 Le 12/05/2013, à 19:17

fcn50

Re : demarrage en 25 sec

Après la 10.10 (gnome 2) je suis passé à Xubuntu (très similaire à gnome 2) pour fuir les tablettes like (unity/gnome 3) supers camions, que ma config supporterait sans soucis mais non merci... J'en suis ravis et ne regrette pas les versions précédentes. La 12.04 fonctionne à merveille.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne

#98 Le 12/05/2013, à 20:13

david69

Re : demarrage en 25 sec

@faucon a propos de ta question#95
voir le resume en #73.

a propos de se lever tot, ca me rappelle ce collectif qui au debut du precedent mandat presidentiel, allait dans les beaux quartiers de la capital a 6:00 sonner le cors, histoire de rappeler cet adage martele par le president en place.


lenovo G580 - 64 bits - Lubuntu 14.04.01 - merci à tous ceux qui aident
FB Chacolinks ong

Hors ligne

#99 Le 01/06/2013, à 16:14

moko138

Re : demarrage en 25 sec

Je me demande si le trou n'est pas dû à ureadahead (sreadahead dans le cas des SSD) qui s'exécute et est visible dans mon boot.log. Cf :
http://ubuntuforums.org/showthread.php?t=1434502
  Qu'en pensez-vous ?

Hors ligne

#100 Le 01/06/2013, à 17:21

fcn50

Re : demarrage en 25 sec

Salut moko138

Sreadahead à été scindé au projet ureadahead et n'existe plus en tant que tel. Tu peux néanmoins virer le .pack et tous les pack de /var/lib/ureadahead pour le forcer à les régénérer à nouveau au prochain boot. Tente, je n'y crois pas trop mais ça ne coûte rien d'essayer...


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

En ligne