Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".

#1 Le 19/04/2013, à 12:10

ExploZe

Problème BOOT / Ping mais pas de ssh

Bonjour,

Suite à un redemarrage simple, impossible de ce connecter au serveur en SSH plus aucun service ne répond mais bien le ping.
Rédemarrage en mode rescue

Voici les infos :

                  Boot Info Script 0.61      [1 April 2012]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector 
    1 of the same hard drive for core.img. core.img is at this location and 
    looks for (md1)/boot/grub on this drive.
 => Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdb and looks at sector 
    1 of the same hard drive for core.img. core.img is at this location and 
    looks for (md1)/boot/grub on this drive.
 => No boot loader is installed in the MBR of /dev/sdc.
 => No boot loader is installed in the MBR of /dev/sdd.

sda1: __________________________________________________________________________

    File system:       linux_raid_member
    Boot sector type:  -
    Boot sector info: 

sda2: __________________________________________________________________________

    File system:       linux_raid_member
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       linux_raid_member
    Boot sector type:  -
    Boot sector info: 

sdb2: __________________________________________________________________________

    File system:       linux_raid_member
    Boot sector type:  -
    Boot sector info: 

sdb3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdc1: __________________________________________________________________________

    File system:       linux_raid_member
    Boot sector type:  -
    Boot sector info: 

sdd1: __________________________________________________________________________

    File system:       linux_raid_member
    Boot sector type:  -
    Boot sector info: 

md3: ___________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

md2: ___________________________________________________________________________

    File system:       reiserfs
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

md1: ___________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          4,096    10,242,048    10,237,953  fd Linux raid autodetect
/dev/sda2          10,242,049   152,199,168   141,957,120  fd Linux raid autodetect
/dev/sda3         152,199,169   156,293,120     4,093,952  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               4,096    10,242,048    10,237,953  fd Linux raid autodetect
/dev/sdb2          10,242,049   152,199,168   141,957,120  fd Linux raid autodetect
/dev/sdb3         152,199,169   156,293,120     4,093,952  82 Linux swap / Solaris


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1                   1 2,930,277,167 2,930,277,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sdc1              34 2,794,523,437 2,794,523,404 RAID partition (Linux)

Drive: sdd _____________________________________________________________________

Disk /dev/sdd: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdd1                   1 2,930,277,167 2,930,277,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sdd1              34 2,794,523,437 2,794,523,404 RAID partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/md1         f503d56b-911d-4c23-97fd-902b820406e8   ext3       /
/dev/md2         f1d40ec1-f238-4512-bd50-4df5e5196d31   reiserfs   
/dev/md3         b53326e6-b854-4cb5-9fd6-7c2deed5bb93   ext3       
/dev/sda1        f56f1bfb-fba7-6190-a4d2-adc226fd5302   linux_raid_member 
/dev/sda2        ebe8ffb5-9296-1007-a4d2-adc226fd5302   linux_raid_member 
/dev/sda3        8ff09c78-d8e2-4d71-9a0d-fb3bc41db75e   swap       
/dev/sdb1        f56f1bfb-fba7-6190-a4d2-adc226fd5302   linux_raid_member 
/dev/sdb2        ebe8ffb5-9296-1007-a4d2-adc226fd5302   linux_raid_member 
/dev/sdb3        c65b12f9-4dcd-4fcd-8883-934e5f59a749   swap       
/dev/sdc1        8f5506cd-524d-36b0-3e5c-4af08c935819   linux_raid_member 
/dev/sdd1        8f5506cd-524d-36b0-3e5c-4af08c935819   linux_raid_member 

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/md1         /                        ext3       (rw,relatime,errors=continue,barrier=1,data=writeback)
/dev/md2         /home                    reiserfs   (rw,relatime)


=========================== md1/boot/grub/grub.cfg: ============================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
}

insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod raid
  insmod mdraid09
  insmod part_msdos
  insmod part_msdos
  insmod ext2
  set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
  search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
  set locale_dir=($root)/boot/grub/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_OVHkernel ###
menuentry "Ubuntu 10.04 LTS, OVH kernel 2.6.34.6-xxxx-grs-ipv6-64" {
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	linux   /boot/bzImage-2.6.34.6-xxxx-grs-ipv6-64 root=/dev/md1 ro  nomodeset
}
### END /etc/grub.d/06_OVHkernel ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-40-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	linux	/boot/vmlinuz-3.2.0-40-generic root=/dev/md1 ro   nomodeset
	initrd	/boot/initrd.img-3.2.0-40-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-40-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	echo	'Loading Linux 3.2.0-40-generic ...'
	linux	/boot/vmlinuz-3.2.0-40-generic root=/dev/md1 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-40-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-39-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	linux	/boot/vmlinuz-3.2.0-39-generic root=/dev/md1 ro   nomodeset
	initrd	/boot/initrd.img-3.2.0-39-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	echo	'Loading Linux 3.2.0-39-generic ...'
	linux	/boot/vmlinuz-3.2.0-39-generic root=/dev/md1 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-39-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	linux	/boot/vmlinuz-3.2.0-38-generic root=/dev/md1 ro   nomodeset
	initrd	/boot/initrd.img-3.2.0-38-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	echo	'Loading Linux 3.2.0-38-generic ...'
	linux	/boot/vmlinuz-3.2.0-38-generic root=/dev/md1 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-38-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	linux	/boot/vmlinuz-3.2.0-36-generic root=/dev/md1 ro   nomodeset
	initrd	/boot/initrd.img-3.2.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	echo	'Loading Linux 3.2.0-36-generic ...'
	linux	/boot/vmlinuz-3.2.0-36-generic root=/dev/md1 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	linux	/boot/vmlinuz-3.2.0-35-generic root=/dev/md1 ro   nomodeset
	initrd	/boot/initrd.img-3.2.0-35-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	echo	'Loading Linux 3.2.0-35-generic ...'
	linux	/boot/vmlinuz-3.2.0-35-generic root=/dev/md1 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-35-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	linux	/boot/vmlinuz-3.2.0-34-generic root=/dev/md1 ro   nomodeset
	initrd	/boot/initrd.img-3.2.0-34-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	echo	'Loading Linux 3.2.0-34-generic ...'
	linux	/boot/vmlinuz-3.2.0-34-generic root=/dev/md1 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-34-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	linux	/boot/vmlinuz-3.2.0-32-generic root=/dev/md1 ro   nomodeset
	initrd	/boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod raid
	insmod mdraid09
	insmod part_msdos
	insmod part_msdos
	insmod ext2
	set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
	search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
	echo	'Loading Linux 3.2.0-32-generic ...'
	linux	/boot/vmlinuz-3.2.0-32-generic root=/dev/md1 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-32-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

================================ md1/etc/fstab: ================================

--------------------------------------------------------------------------------
# <sys.fichiers><pt de montage><type> <options>  <dump> <pass>
/dev/md1	/	ext3	errors=remount-ro	0	1
/dev/md2	/home	reiserfs	defaults	1	2
/dev/sda3	swap	swap	defaults	0	0
/dev/sdb3	swap	swap	defaults	0	0
proc		/proc	proc	defaults		0	0
sysfs		/sys	sysfs	defaults		0	0
dev		/dev	devtmpfs	rw	0	0
/dev/md3	/data	ext3	defaults	0	0
tmpfs /home/7enlocation.com/htdocs/static_cache/villes tmpfs default,size=10g 0 0
--------------------------------------------------------------------------------

==================== md1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

               =                boot/grub/core.img                             1
               =                boot/grub/grub.cfg                             2
               =                boot/initrd.img-3.2.0-32-generic              18
               =                boot/initrd.img-3.2.0-34-generic              32
               =                boot/initrd.img-3.2.0-35-generic              24
               =                boot/initrd.img-3.2.0-36-generic              27
               =                boot/initrd.img-3.2.0-38-generic              11
               =                boot/initrd.img-3.2.0-39-generic              40
               =                boot/initrd.img-3.2.0-40-generic              56
               =                boot/vmlinuz-3.2.0-32-generic                  5
               =                boot/vmlinuz-3.2.0-34-generic                  3
               =                boot/vmlinuz-3.2.0-35-generic                 12
               =                boot/vmlinuz-3.2.0-36-generic                  3
               =                boot/vmlinuz-3.2.0-38-generic                 18
               =                boot/vmlinuz-3.2.0-39-generic                 21
               =                boot/vmlinuz-3.2.0-40-generic                 15
               =                initrd.img                                    56
               =                initrd.img.old                                40
               =                vmlinuz                                       15
               =                vmlinuz.old                                   21

=============================== StdErr Messages: ===============================

  /var/lock/lvm: mkdir failed: No such file or directory
  File-based locking initialisation failed.
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in

Merci d'avance

Hors ligne

#2 Le 19/04/2013, à 12:25

Kooothor

Re : Problème BOOT / Ping mais pas de ssh

T'as pas joué avec le firewall avant le reboot ?


Utilisateur d'Archlinux | Cruncheur BOINC | Bépoiste
Admin de Flood.fr | Mon ~ | Mes dotfiles
«Your behavior is not funny and is wasting the time of the federal government !»

Hors ligne

#3 Le 19/04/2013, à 13:12

ExploZe

Re : Problème BOOT / Ping mais pas de ssh

Non malheureusement, j'aurai pu trouvé sinon je pense ! smile

Le problème c'est que j'ai zéro log, j'ai activé les logs au Boot dans /etc/default/bootlogd
Mais le fichier /var/log/boot est toujours vide néant

Aucun message dans /var/log/dmesg non plus

Donc je pense que mes partitions ne sont pas montée ou quelque chose comme ça !

Hors ligne

#4 Le 19/04/2013, à 13:13

ExploZe

Re : Problème BOOT / Ping mais pas de ssh

D'autre info

Linux version 3.2.2-xxxx-std-ipv6-64 (root@kernel-64.ovh.net) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jan 27 14:06:07 UTC 2012

Sinon j'ai un bon nombre de packet de kernel :

dpkg -l | grep -Ei "linux-headers|linux-image"
rc  linux-image-2.6.32-23-generic        2.6.32-23.37                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-27-generic        2.6.32-27.49                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-28-generic        2.6.32-28.55                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-29-generic        2.6.32-29.58                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-32-generic        2.6.32-32.62                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-33-generic        2.6.32-33.72                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-34-generic        2.6.32-34.77                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-35-generic        2.6.32-35.78                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-37-generic        2.6.32-37.81                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-38-generic        2.6.32-38.83                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-39-generic        2.6.32-39.86                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-40-generic        2.6.32-40.87                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-41-generic        2.6.32-41.94                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-42-generic        2.6.32-42.96                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-43-generic        2.6.32-43.97                            Linux kernel image for version 2.6.32 on x86/x86_64
rc  linux-image-2.6.32-44-generic        2.6.32-44.98                            Linux kernel image for version 2.6.32 on x86/x86_64
ii  linux-image-3.2.0-32-generic         3.2.0-32.51                             Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii  linux-image-3.2.0-34-generic         3.2.0-34.53                             Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii  linux-image-3.2.0-35-generic         3.2.0-35.55                             Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii  linux-image-3.2.0-36-generic         3.2.0-36.57                             Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii  linux-image-3.2.0-38-generic         3.2.0-38.61                             Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii  linux-image-3.2.0-39-generic         3.2.0-39.62                             Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii  linux-image-3.2.0-40-generic         3.2.0-40.64                             Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii  linux-image-generic                  3.2.0.40.48                             Generic Linux kernel image

Dernière modification par ExploZe (Le 19/04/2013, à 13:16)

Hors ligne

#5 Le 19/04/2013, à 14:59

Kooothor

Re : Problème BOOT / Ping mais pas de ssh

t'as de l'espace disque sur ta partition /boot ?


Utilisateur d'Archlinux | Cruncheur BOINC | Bépoiste
Admin de Flood.fr | Mon ~ | Mes dotfiles
«Your behavior is not funny and is wasting the time of the federal government !»

Hors ligne

#6 Le 19/04/2013, à 15:38

ExploZe

Re : Problème BOOT / Ping mais pas de ssh

Oui, j'ai 3.6Go de libre sur 5Go

Mais c'etait pas une mauvaise idée smile

Hors ligne

#7 Le 20/04/2013, à 11:32

ExploZe

Re : Problème BOOT / Ping mais pas de ssh

Bon finalement j'ai reussi à redemarrer par un miracle, j'ai stopper tous les services au démarrage avec update-rc.d, supprimer les interfaces failover (8) et magie ça refonctionne ... pk comment je sais pas vu que les services ce lancent correctement et j'ai pu remettre mes ips failover ...

Étrange

Hors ligne

Haut de page ↑