Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

#1 Le 23/04/2013, à 18:50

nam1962

hybride AMD/Intel sur HP Envy M6 - comment installer ?

Hello.
Xubuntu 13.04 sur un HP Envy M6 1164sf - Jusqu'ici, je regardais tous les tutos possibles et ne voulais pas vous ennuyer avec un problème sur beta.
Mais là on est quasi à la release et tout ce que j'ai réussi ça a été de devoir effacer mon Xorg.conf...

~$ lspci | grep "VGA compatible controller"
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT [Radeon HD 7670M]

Le pilote additionnel s'installe, pas moyen de l'activer ensuite.

Donc je dois tourner sur la intel, comme ça en plus :

~$ glxinfo | grep "direct rendering"
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  153 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12

Bref, c'est naze et je ne sais comment rendre ça tout bien.

Merci d’avance pour vos conseils smile

gedit /etc/X11/xorg.conf :

# NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.

gedit /var/log/Xorg.0.log

[    27.506] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    27.506] X Protocol Version 11, Revision 0
[    27.506] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    27.506] Current Operating System: Linux asatysco2 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64
[    27.506] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=2db2e89d-de3e-469b-bf56-425af700378f ro quiet splash vt.handoff=7
[    27.506] Build Date: 17 April 2013  10:43:13PM
[    27.506] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
[    27.506] Current version of pixman: 0.28.2
[    27.506] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    27.506] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.506] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 23 19:35:34 2013
[    27.507] (==) Using config file: "/etc/X11/xorg.conf"
[    27.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.602] (==) No Layout section.  Using the first Screen section.
[    27.602] (==) No screen section available. Using defaults.
[    27.602] (**) |-->Screen "Default Screen Section" (0)
[    27.602] (**) |   |-->Monitor "<default monitor>"
[    27.602] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    27.602] (==) Automatically adding devices
[    27.602] (==) Automatically enabling devices
[    27.602] (==) Automatically adding GPU devices
[    27.602] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    27.602] 	Entry deleted from font path.
[    27.602] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    27.602] 	Entry deleted from font path.
[    27.602] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    27.602] 	Entry deleted from font path.
[    27.602] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    27.602] 	Entry deleted from font path.
[    27.602] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    27.602] 	Entry deleted from font path.
[    27.602] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    27.602] 	Entry deleted from font path.
[    27.602] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    27.602] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    27.602] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.602] (II) Loader magic: 0x7ff8fe47fd20
[    27.602] (II) Module ABI versions:
[    27.602] 	X.Org ANSI C Emulation: 0.4
[    27.602] 	X.Org Video Driver: 13.1
[    27.602] 	X.Org XInput driver : 18.0
[    27.602] 	X.Org Server Extension : 7.0
[    27.603] (II) config/udev: Adding drm device (/dev/dri/card0)
[    27.604] (--) PCI:*(0:0:2:0) 8086:0116:103c:18a5 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[    27.604] (--) PCI: (0:1:0:0) 1002:6840:103c:18a5 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    27.604] (II) Open ACPI successful (/var/run/acpid.socket)
[    27.604] Initializing built-in extension Generic Event Extension
[    27.604] Initializing built-in extension SHAPE
[    27.604] Initializing built-in extension MIT-SHM
[    27.604] Initializing built-in extension XInputExtension
[    27.604] Initializing built-in extension XTEST
[    27.604] Initializing built-in extension BIG-REQUESTS
[    27.604] Initializing built-in extension SYNC
[    27.604] Initializing built-in extension XKEYBOARD
[    27.604] Initializing built-in extension XC-MISC
[    27.604] Initializing built-in extension SECURITY
[    27.604] Initializing built-in extension XINERAMA
[    27.604] Initializing built-in extension XFIXES
[    27.604] Initializing built-in extension RENDER
[    27.604] Initializing built-in extension RANDR
[    27.604] Initializing built-in extension COMPOSITE
[    27.604] Initializing built-in extension DAMAGE
[    27.604] Initializing built-in extension MIT-SCREEN-SAVER
[    27.604] Initializing built-in extension DOUBLE-BUFFER
[    27.604] Initializing built-in extension RECORD
[    27.604] Initializing built-in extension DPMS
[    27.604] Initializing built-in extension X-Resource
[    27.604] Initializing built-in extension XVideo
[    27.604] Initializing built-in extension XVideo-MotionCompensation
[    27.604] Initializing built-in extension SELinux
[    27.604] Initializing built-in extension XFree86-VidModeExtension
[    27.604] Initializing built-in extension XFree86-DGA
[    27.604] Initializing built-in extension XFree86-DRI
[    27.604] Initializing built-in extension DRI2
[    27.604] (II) LoadModule: "glx"
[    27.660] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
[    27.661] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    27.661] 	compiled for 6.9.0, module version = 1.0.0
[    27.661] Loading extension GLX
[    27.661] (==) Matched intel as autoconfigured driver 0
[    27.661] (==) Matched intel as autoconfigured driver 1
[    27.661] (==) Matched vesa as autoconfigured driver 2
[    27.661] (==) Matched modesetting as autoconfigured driver 3
[    27.661] (==) Matched fbdev as autoconfigured driver 4
[    27.661] (==) Assigned the driver to the xf86ConfigLayout
[    27.661] (II) LoadModule: "intel"
[    27.718] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    27.916] (II) Module intel: vendor="X.Org Foundation"
[    27.916] 	compiled for 1.13.3, module version = 2.21.6
[    27.916] 	Module class: X.Org Video Driver
[    27.916] 	ABI class: X.Org Video Driver, version 13.1
[    27.916] (II) LoadModule: "vesa"
[    27.916] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.916] (II) Module vesa: vendor="X.Org Foundation"
[    27.916] 	compiled for 1.12.99.902, module version = 2.3.2
[    27.916] 	Module class: X.Org Video Driver
[    27.916] 	ABI class: X.Org Video Driver, version 13.0
[    27.916] (II) LoadModule: "modesetting"
[    27.916] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    27.916] (II) Module modesetting: vendor="X.Org Foundation"
[    27.916] 	compiled for 1.13.3, module version = 0.7.0
[    27.916] 	Module class: X.Org Video Driver
[    27.916] 	ABI class: X.Org Video Driver, version 13.1
[    27.916] (II) LoadModule: "fbdev"
[    27.917] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.917] (II) Module fbdev: vendor="X.Org Foundation"
[    27.917] 	compiled for 1.12.99.902, module version = 0.4.3
[    27.917] 	Module class: X.Org Video Driver
[    27.917] 	ABI class: X.Org Video Driver, version 13.0
[    27.917] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    27.917] (II) VESA: driver for VESA chipsets: vesa
[    27.917] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    27.917] (II) FBDEV: driver for framebuffer: fbdev
[    27.917] (++) using VT number 7

[    27.917] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>)
[    27.917] (WW) Falling back to old probe method for vesa
[    27.917] (WW) Falling back to old probe method for modesetting
[    27.918] (WW) Falling back to old probe method for fbdev
[    27.918] (II) Loading sub module "fbdevhw"
[    27.918] (II) LoadModule: "fbdevhw"
[    27.918] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.918] (II) Module fbdevhw: vendor="X.Org Foundation"
[    27.918] 	compiled for 1.13.3, module version = 0.0.2
[    27.918] 	ABI class: X.Org Video Driver, version 13.1
[    27.918] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    27.918] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    27.918] (==) intel(0): RGB weight 888
[    27.918] (==) intel(0): Default visual is TrueColor
[    27.918] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    27.918] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    27.918] (**) intel(0): Framebuffer tiled
[    27.918] (**) intel(0): Pixmaps tiled
[    27.918] (**) intel(0): "Tear free" disabled
[    27.918] (**) intel(0): Forcing per-crtc-pixmaps? no
[    27.918] (II) intel(0): Output LVDS1 has no monitor section
[    27.918] (--) intel(0): found backlight control interface intel_backlight (type 'raw')
[    27.932] (II) intel(0): Output VGA1 has no monitor section
[    27.948] (II) intel(0): Output HDMI1 has no monitor section
[    27.996] (II) intel(0): Output DP1 has no monitor section
[    27.996] (II) intel(0): EDID for output LVDS1
[    27.996] (II) intel(0): Manufacturer: CMN  Model: 15b6  Serial#: 0
[    27.996] (II) intel(0): Year: 2012  Week: 2
[    27.996] (II) intel(0): EDID Version: 1.4
[    27.996] (II) intel(0): Digital Display Input
[    27.996] (II) intel(0): 6 bits per channel
[    27.996] (II) intel(0): Digital interface is undefined
[    27.996] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    27.996] (II) intel(0): Gamma: 2.20
[    27.996] (II) intel(0): No DPMS capabilities specified
[    27.996] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    27.996] (II) intel(0): First detailed timing is preferred mode
[    27.996] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    27.996] (II) intel(0): redX: 0.577 redY: 0.364   greenX: 0.348 greenY: 0.563
[    27.996] (II) intel(0): blueX: 0.151 blueY: 0.116   whiteX: 0.313 whiteY: 0.329
[    27.996] (II) intel(0): Manufacturer's mask: 0
[    27.996] (II) intel(0): Supported detailed timing:
[    27.996] (II) intel(0): clock: 76.4 MHz   Image Size:  344 x 193 mm
[    27.996] (II) intel(0): h_active: 1366  h_sync: 1434  h_sync_end 1479 h_blank_end 1591 h_border: 0
[    27.996] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 779 v_blanking: 800 v_border: 0
[    27.996] (II) intel(0): Supported detailed timing:
[    27.996] (II) intel(0): clock: 51.0 MHz   Image Size:  344 x 193 mm
[    27.996] (II) intel(0): h_active: 1366  h_sync: 1434  h_sync_end 1479 h_blank_end 1591 h_border: 0
[    27.996] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 779 v_blanking: 800 v_border: 0
[    27.996] (II) intel(0): Unknown vendor-specific block 2
[    27.996] (II) intel(0): EDID (in hex):
[    27.996] (II) intel(0): 	00ffffffffffff000daeb61500000000
[    27.996] (II) intel(0): 	02160104902213780ad1f5935d599026
[    27.996] (II) intel(0): 	1d505400000001010101010101010101
[    27.996] (II) intel(0): 	010101010101d81d56e150002030442d
[    27.996] (II) intel(0): 	470058c11000001ae71356e150002030
[    27.996] (II) intel(0): 	442d470058c11000001a000000000000
[    27.996] (II) intel(0): 	00000000000000000000000000000002
[    27.996] (II) intel(0): 	000c4cff0a3c6410121e64000000004c
[    27.997] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    27.997] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    27.997] (II) intel(0): Printing probed modes for output LVDS1
[    27.997] (II) intel(0): Modeline "1366x768"x60.0   76.40  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (48.0 kHz eP)
[    27.997] (II) intel(0): Modeline "1366x768"x40.0   50.95  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (32.0 kHz e)
[    27.997] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    27.997] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    27.997] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    27.997] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    27.997] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    27.997] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    28.012] (II) intel(0): EDID for output VGA1
[    28.028] (II) intel(0): EDID for output HDMI1
[    28.076] (II) intel(0): EDID for output DP1
[    28.076] (II) intel(0): Output LVDS1 connected
[    28.076] (II) intel(0): Output VGA1 disconnected
[    28.076] (II) intel(0): Output HDMI1 disconnected
[    28.076] (II) intel(0): Output DP1 disconnected
[    28.076] (II) intel(0): Using exact sizes for initial modes
[    28.076] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    28.076] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    28.076] (==) intel(0): DPI set to (96, 96)
[    28.076] (II) Loading sub module "dri2"
[    28.076] (II) LoadModule: "dri2"
[    28.076] (II) Module "dri2" already built-in
[    28.076] (II) UnloadModule: "vesa"
[    28.076] (II) Unloading vesa
[    28.076] (II) UnloadModule: "modesetting"
[    28.076] (II) Unloading modesetting
[    28.076] (II) UnloadModule: "fbdev"
[    28.076] (II) Unloading fbdev
[    28.076] (II) UnloadSubModule: "fbdevhw"
[    28.076] (II) Unloading fbdevhw
[    28.076] (==) Depth 24 pixmap format is 32 bpp
[    28.076] (II) intel(0): SNA initialized with SandyBridge backend
[    28.076] (==) intel(0): Backing store disabled
[    28.076] (==) intel(0): Silken mouse enabled
[    28.076] (II) intel(0): HW Cursor enabled
[    28.076] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    28.076] (==) intel(0): DPMS enabled
[    28.076] (II) intel(0): [DRI2] Setup complete
[    28.076] (II) intel(0): [DRI2]   DRI driver: i965
[    28.076] (II) intel(0): direct rendering: DRI2 Enabled
[    28.076] (==) intel(0): hotplug detection: "enabled"
[    28.077] (--) RandR disabled
[    28.081] (II) SELinux: Disabled on system
[    28.082] (EE) GLX error: Can not get required symbols.
[    28.082] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[    28.092] (II) intel(0): Setting screen physical size to 361 x 203
[    28.111] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    28.113] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.113] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.113] (II) LoadModule: "evdev"
[    28.114] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.213] (II) Module evdev: vendor="X.Org Foundation"
[    28.213] 	compiled for 1.13.3, module version = 2.7.3
[    28.213] 	Module class: X.Org XInput Driver
[    28.213] 	ABI class: X.Org XInput driver, version 18.0
[    28.213] (II) Using input driver 'evdev' for 'Power Button'
[    28.213] (**) Power Button: always reports core events
[    28.213] (**) evdev: Power Button: Device: "/dev/input/event2"
[    28.214] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.214] (--) evdev: Power Button: Found keys
[    28.214] (II) evdev: Power Button: Configuring as keyboard
[    28.214] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    28.214] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.214] (**) Option "xkb_rules" "evdev"
[    28.214] (**) Option "xkb_model" "pc105"
[    28.214] (**) Option "xkb_layout" "fr"
[    28.214] (**) Option "xkb_variant" "latin9"
[    28.216] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[    28.216] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    28.216] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    28.216] (II) Using input driver 'evdev' for 'Video Bus'
[    28.216] (**) Video Bus: always reports core events
[    28.217] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    28.217] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    28.217] (--) evdev: Video Bus: Found keys
[    28.217] (II) evdev: Video Bus: Configuring as keyboard
[    28.217] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input8/event8"
[    28.217] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.217] (**) Option "xkb_rules" "evdev"
[    28.217] (**) Option "xkb_model" "pc105"
[    28.217] (**) Option "xkb_layout" "fr"
[    28.217] (**) Option "xkb_variant" "latin9"
[    28.217] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    28.217] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.217] (II) Using input driver 'evdev' for 'Power Button'
[    28.217] (**) Power Button: always reports core events
[    28.217] (**) evdev: Power Button: Device: "/dev/input/event0"
[    28.217] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.217] (--) evdev: Power Button: Found keys
[    28.217] (II) evdev: Power Button: Configuring as keyboard
[    28.217] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[    28.217] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    28.217] (**) Option "xkb_rules" "evdev"
[    28.217] (**) Option "xkb_model" "pc105"
[    28.217] (**) Option "xkb_layout" "fr"
[    28.217] (**) Option "xkb_variant" "latin9"
[    28.217] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    28.217] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    28.218] (II) Using input driver 'evdev' for 'Video Bus'
[    28.218] (**) Video Bus: always reports core events
[    28.218] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    28.218] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    28.218] (--) evdev: Video Bus: Found keys
[    28.218] (II) evdev: Video Bus: Configuring as keyboard
[    28.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input7/event7"
[    28.218] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    28.218] (**) Option "xkb_rules" "evdev"
[    28.218] (**) Option "xkb_model" "pc105"
[    28.218] (**) Option "xkb_layout" "fr"
[    28.218] (**) Option "xkb_variant" "latin9"
[    28.218] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    28.218] (II) No input driver specified, ignoring this device.
[    28.218] (II) This device may have been added with another device file.
[    28.218] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    28.218] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    28.218] (II) config/udev: Adding input device HID 04d9:0461 (/dev/input/event4)
[    28.218] (**) HID 04d9:0461: Applying InputClass "evdev pointer catchall"
[    28.218] (II) Using input driver 'evdev' for 'HID 04d9:0461'
[    28.218] (**) HID 04d9:0461: always reports core events
[    28.218] (**) evdev: HID 04d9:0461: Device: "/dev/input/event4"
[    28.218] (--) evdev: HID 04d9:0461: Vendor 0x4d9 Product 0x461
[    28.218] (--) evdev: HID 04d9:0461: Found 9 mouse buttons
[    28.218] (--) evdev: HID 04d9:0461: Found scroll wheel(s)
[    28.218] (--) evdev: HID 04d9:0461: Found relative axes
[    28.218] (--) evdev: HID 04d9:0461: Found x and y relative axes
[    28.218] (II) evdev: HID 04d9:0461: Configuring as mouse
[    28.218] (II) evdev: HID 04d9:0461: Adding scrollwheel support
[    28.218] (**) evdev: HID 04d9:0461: YAxisMapping: buttons 4 and 5
[    28.218] (**) evdev: HID 04d9:0461: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.218] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input4/event4"
[    28.218] (II) XINPUT: Adding extended input device "HID 04d9:0461" (type: MOUSE, id 10)
[    28.219] (II) evdev: HID 04d9:0461: initialized for relative axes.
[    28.219] (**) HID 04d9:0461: (accel) keeping acceleration scheme 1
[    28.219] (**) HID 04d9:0461: (accel) acceleration profile 0
[    28.219] (**) HID 04d9:0461: (accel) acceleration factor: 2.000
[    28.219] (**) HID 04d9:0461: (accel) acceleration threshold: 4
[    28.219] (II) config/udev: Adding input device HID 04d9:0461 (/dev/input/mouse0)
[    28.219] (II) No input driver specified, ignoring this device.
[    28.219] (II) This device may have been added with another device file.
[    28.219] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event12)
[    28.219] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[    28.219] (II) Using input driver 'evdev' for 'HP Truevision HD'
[    28.219] (**) HP Truevision HD: always reports core events
[    28.219] (**) evdev: HP Truevision HD: Device: "/dev/input/event12"
[    28.219] (--) evdev: HP Truevision HD: Vendor 0x64e Product 0xc33c
[    28.219] (--) evdev: HP Truevision HD: Found keys
[    28.219] (II) evdev: HP Truevision HD: Configuring as keyboard
[    28.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12/event12"
[    28.219] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 11)
[    28.219] (**) Option "xkb_rules" "evdev"
[    28.219] (**) Option "xkb_model" "pc105"
[    28.219] (**) Option "xkb_layout" "fr"
[    28.219] (**) Option "xkb_variant" "latin9"
[    28.220] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    28.220] (II) No input driver specified, ignoring this device.
[    28.220] (II) This device may have been added with another device file.
[    28.220] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    28.220] (II) No input driver specified, ignoring this device.
[    28.220] (II) This device may have been added with another device file.
[    28.220] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    28.220] (II) No input driver specified, ignoring this device.
[    28.220] (II) This device may have been added with another device file.
[    28.220] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    28.220] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.220] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    28.220] (**) AT Translated Set 2 keyboard: always reports core events
[    28.220] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    28.220] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    28.220] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    28.220] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    28.220] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    28.220] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    28.220] (**) Option "xkb_rules" "evdev"
[    28.220] (**) Option "xkb_model" "pc105"
[    28.220] (**) Option "xkb_layout" "fr"
[    28.220] (**) Option "xkb_variant" "latin9"
[    28.221] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[    28.221] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    28.221] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    28.221] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    28.221] (II) LoadModule: "synaptics"
[    28.221] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    28.221] (II) Module synaptics: vendor="X.Org Foundation"
[    28.221] 	compiled for 1.13.1.901, module version = 1.6.2
[    28.221] 	Module class: X.Org XInput Driver
[    28.221] 	ABI class: X.Org XInput driver, version 18.0
[    28.221] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    28.221] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    28.221] (**) Option "Device" "/dev/input/event13"
[    28.236] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5684
[    28.236] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4862
[    28.236] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    28.236] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    28.236] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    28.236] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    28.236] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    28.236] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    28.236] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[    28.236] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    28.237] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    28.237] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    28.237] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[    28.237] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    28.237] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    28.237] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    28.237] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    28.237] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    28.238] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    28.238] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    28.238] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[    28.238] (II) No input driver specified, ignoring this device.
[    28.238] (II) This device may have been added with another device file.
[    28.239] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    28.239] (II) No input driver specified, ignoring this device.
[    28.239] (II) This device may have been added with another device file.
[    28.242] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[    28.242] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    28.242] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    28.242] (**) HP WMI hotkeys: always reports core events
[    28.242] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[    28.242] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    28.242] (--) evdev: HP WMI hotkeys: Found keys
[    28.242] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    28.242] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[    28.242] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[    28.242] (**) Option "xkb_rules" "evdev"
[    28.242] (**) Option "xkb_model" "pc105"
[    28.242] (**) Option "xkb_layout" "fr"
[    28.242] (**) Option "xkb_variant" "latin9"
[    31.471] (II) intel(0): EDID vendor "CMN", prod id 5558
[    31.471] (II) intel(0): Printing DDC gathered Modelines:
[    31.471] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (48.0 kHz eP)
[    31.471] (II) intel(0): Modeline "1366x768"x0.0   50.95  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (32.0 kHz e)
[    31.691] (II) intel(0): EDID vendor "CMN", prod id 5558
[    31.691] (II) intel(0): Printing DDC gathered Modelines:
[    31.691] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (48.0 kHz eP)
[    31.691] (II) intel(0): Modeline "1366x768"x0.0   50.95  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (32.0 kHz e)
[    31.768] (II) intel(0): EDID vendor "CMN", prod id 5558
[    31.768] (II) intel(0): Printing DDC gathered Modelines:
[    31.768] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (48.0 kHz eP)
[    31.768] (II) intel(0): Modeline "1366x768"x0.0   50.95  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (32.0 kHz e)

Dernière modification par nam1962 (Le 23/04/2013, à 18:54)


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#2 Le 26/04/2013, à 11:34

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

J'ai essayé ceci : https://help.ubuntu.com/community/Binar … WORKAROUND

Fonctionne toujours pas (démarrage console, obligé de sudo rm /etc/X11/xorg.conf pour pouvoir démarrer...)


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#3 Le 29/04/2013, à 18:05

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Je suis tout seul avec mon problème ? sad


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#4 Le 30/04/2013, à 09:03

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

de fait, même ma Intel est en mode dégradé...


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#5 Le 30/04/2013, à 10:27

fcn50

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Salut,

Pour AMD tu dois installer le dernier catalyst 13.4 (support noyau 3.7 - 3.8) et au reboot: fglrxinfo pour contrôler si il est bien installé.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#6 Le 30/04/2013, à 11:58

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Merci, j'ai retenté : échec.
Ca redémarre en mode console, seul moyen de récupérer le graphique : rm xorg.conf
Et je suis sur ma intel sans accélération (j'ai pourtant installé vaabi entretemps)

Pfff....


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#7 Le 30/04/2013, à 14:13

fcn50

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Quelle procédure suis-tu pour l'install de catalyst? Pour le commutables, tu as lu ceci?:

http://forum.ubuntu-fr.org/viewtopic.php?id=924311


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#8 Le 30/04/2013, à 14:57

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

J'ai essayé plusieurs procédures - celle de la page ubuntu.fr - celle de Catalyst, celle de ubuntu anglais (à chaque fois en supprimant la précédente install bien sûr), celle de la page que tu indiques et celle de la soluce en anglais originelle.
Echec systématique.
Comme je l'indique aussi, pas d'accélération sur ma Intel de base malgré l'application du workarouns de ton lien et de l'activation de vaabi.

Bref, je tourne en rond, perdu plein de temps et souci pas résolu.

Maintenant, mon xorg.conf est vide malgré le fait d'avoir fait un

sudo dpkg-reconfigure -phigh xserver-xorg

et gedit /var/log/Xorg.0.log donne :

[    19.113] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    19.113] X Protocol Version 11, Revision 0
[    19.113] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    19.113] Current Operating System: Linux asatysco2 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64
[    19.113] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=2db2e89d-de3e-469b-bf56-425af700378f ro quiet splash vt.handoff=7
[    19.113] Build Date: 17 April 2013  10:43:13PM
[    19.114] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
[    19.114] Current version of pixman: 0.28.2
[    19.114] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    19.114] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.114] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 30 13:25:53 2013
[    19.220] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.362] (==) No Layout section.  Using the first Screen section.
[    19.362] (==) No screen section available. Using defaults.
[    19.362] (**) |-->Screen "Default Screen Section" (0)
[    19.362] (**) |   |-->Monitor "<default monitor>"
[    19.415] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    19.415] (==) Automatically adding devices
[    19.415] (==) Automatically enabling devices
[    19.415] (==) Automatically adding GPU devices
[    19.887] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    19.887] 	Entry deleted from font path.
[    19.887] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    19.887] 	Entry deleted from font path.
[    19.887] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    19.887] 	Entry deleted from font path.
[    20.022] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.022] 	Entry deleted from font path.
[    20.022] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.022] 	Entry deleted from font path.
[    20.022] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    20.022] 	Entry deleted from font path.
[    20.022] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    20.022] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.022] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.100] (II) Loader magic: 0x7f53c0180d20
[    20.100] (II) Module ABI versions:
[    20.100] 	X.Org ANSI C Emulation: 0.4
[    20.100] 	X.Org Video Driver: 13.1
[    20.100] 	X.Org XInput driver : 18.0
[    20.100] 	X.Org Server Extension : 7.0
[    20.100] (II) config/udev: Adding drm device (/dev/dri/card0)
[    20.101] (--) PCI:*(0:0:2:0) 8086:0116:103c:18a5 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[    20.101] (--) PCI: (0:1:0:0) 1002:6840:103c:18a5 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    20.101] (II) Open ACPI successful (/var/run/acpid.socket)
[    20.135] Initializing built-in extension Generic Event Extension
[    20.135] Initializing built-in extension SHAPE
[    20.135] Initializing built-in extension MIT-SHM
[    20.135] Initializing built-in extension XInputExtension
[    20.135] Initializing built-in extension XTEST
[    20.135] Initializing built-in extension BIG-REQUESTS
[    20.135] Initializing built-in extension SYNC
[    20.135] Initializing built-in extension XKEYBOARD
[    20.135] Initializing built-in extension XC-MISC
[    20.135] Initializing built-in extension SECURITY
[    20.135] Initializing built-in extension XINERAMA
[    20.135] Initializing built-in extension XFIXES
[    20.135] Initializing built-in extension RENDER
[    20.135] Initializing built-in extension RANDR
[    20.135] Initializing built-in extension COMPOSITE
[    20.135] Initializing built-in extension DAMAGE
[    20.135] Initializing built-in extension MIT-SCREEN-SAVER
[    20.135] Initializing built-in extension DOUBLE-BUFFER
[    20.135] Initializing built-in extension RECORD
[    20.135] Initializing built-in extension DPMS
[    20.135] Initializing built-in extension X-Resource
[    20.135] Initializing built-in extension XVideo
[    20.135] Initializing built-in extension XVideo-MotionCompensation
[    20.135] Initializing built-in extension SELinux
[    20.135] Initializing built-in extension XFree86-VidModeExtension
[    20.135] Initializing built-in extension XFree86-DGA
[    20.135] Initializing built-in extension XFree86-DRI
[    20.135] Initializing built-in extension DRI2
[    20.135] (II) LoadModule: "glx"
[    20.135] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
[    20.426] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    20.426] 	compiled for 6.9.0, module version = 1.0.0
[    20.426] Loading extension GLX
[    20.426] (==) Matched intel as autoconfigured driver 0
[    20.426] (==) Matched intel as autoconfigured driver 1
[    20.426] (==) Matched vesa as autoconfigured driver 2
[    20.426] (==) Matched modesetting as autoconfigured driver 3
[    20.426] (==) Matched fbdev as autoconfigured driver 4
[    20.426] (==) Assigned the driver to the xf86ConfigLayout
[    20.426] (II) LoadModule: "intel"
[    20.464] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    20.713] (II) Module intel: vendor="X.Org Foundation"
[    20.713] 	compiled for 1.13.3, module version = 2.21.6
[    20.713] 	Module class: X.Org Video Driver
[    20.713] 	ABI class: X.Org Video Driver, version 13.1
[    20.713] (II) LoadModule: "vesa"
[    20.713] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.735] (II) Module vesa: vendor="X.Org Foundation"
[    20.735] 	compiled for 1.12.99.902, module version = 2.3.2
[    20.735] 	Module class: X.Org Video Driver
[    20.735] 	ABI class: X.Org Video Driver, version 13.0
[    20.735] (II) LoadModule: "modesetting"
[    20.735] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.782] (II) Module modesetting: vendor="X.Org Foundation"
[    20.782] 	compiled for 1.13.3, module version = 0.7.0
[    20.782] 	Module class: X.Org Video Driver
[    20.782] 	ABI class: X.Org Video Driver, version 13.1
[    20.782] (II) LoadModule: "fbdev"
[    20.783] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.860] (II) Module fbdev: vendor="X.Org Foundation"
[    20.860] 	compiled for 1.12.99.902, module version = 0.4.3
[    20.860] 	Module class: X.Org Video Driver
[    20.861] 	ABI class: X.Org Video Driver, version 13.0
[    20.861] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    20.862] (II) VESA: driver for VESA chipsets: vesa
[    20.862] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.862] (II) FBDEV: driver for framebuffer: fbdev
[    20.862] (++) using VT number 7

[    20.874] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>)
[    20.958] (WW) Falling back to old probe method for vesa
[    20.958] (WW) Falling back to old probe method for modesetting
[    20.958] (WW) Falling back to old probe method for fbdev
[    20.958] (II) Loading sub module "fbdevhw"
[    20.958] (II) LoadModule: "fbdevhw"
[    20.958] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.028] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.028] 	compiled for 1.13.3, module version = 0.0.2
[    21.028] 	ABI class: X.Org Video Driver, version 13.1
[    21.028] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.028] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    21.028] (==) intel(0): RGB weight 888
[    21.028] (==) intel(0): Default visual is TrueColor
[    21.028] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    21.028] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    21.028] (**) intel(0): Framebuffer tiled
[    21.028] (**) intel(0): Pixmaps tiled
[    21.028] (**) intel(0): "Tear free" disabled
[    21.028] (**) intel(0): Forcing per-crtc-pixmaps? no
[    21.029] (II) intel(0): Output LVDS1 has no monitor section
[    21.029] (--) intel(0): found backlight control interface intel_backlight (type 'raw')
[    21.044] (II) intel(0): Output VGA1 has no monitor section
[    21.060] (II) intel(0): Output HDMI1 has no monitor section
[    21.108] (II) intel(0): Output DP1 has no monitor section
[    21.108] (II) intel(0): EDID for output LVDS1
[    21.108] (II) intel(0): Manufacturer: CMN  Model: 15b6  Serial#: 0
[    21.108] (II) intel(0): Year: 2012  Week: 2
[    21.108] (II) intel(0): EDID Version: 1.4
[    21.108] (II) intel(0): Digital Display Input
[    21.108] (II) intel(0): 6 bits per channel
[    21.108] (II) intel(0): Digital interface is undefined
[    21.108] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    21.108] (II) intel(0): Gamma: 2.20
[    21.108] (II) intel(0): No DPMS capabilities specified
[    21.108] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.108] (II) intel(0): First detailed timing is preferred mode
[    21.108] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    21.108] (II) intel(0): redX: 0.577 redY: 0.364   greenX: 0.348 greenY: 0.563
[    21.108] (II) intel(0): blueX: 0.151 blueY: 0.116   whiteX: 0.313 whiteY: 0.329
[    21.108] (II) intel(0): Manufacturer's mask: 0
[    21.108] (II) intel(0): Supported detailed timing:
[    21.108] (II) intel(0): clock: 76.4 MHz   Image Size:  344 x 193 mm
[    21.108] (II) intel(0): h_active: 1366  h_sync: 1434  h_sync_end 1479 h_blank_end 1591 h_border: 0
[    21.108] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 779 v_blanking: 800 v_border: 0
[    21.108] (II) intel(0): Supported detailed timing:
[    21.108] (II) intel(0): clock: 51.0 MHz   Image Size:  344 x 193 mm
[    21.108] (II) intel(0): h_active: 1366  h_sync: 1434  h_sync_end 1479 h_blank_end 1591 h_border: 0
[    21.108] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 779 v_blanking: 800 v_border: 0
[    21.108] (II) intel(0): Unknown vendor-specific block 2
[    21.108] (II) intel(0): EDID (in hex):
[    21.108] (II) intel(0): 	00ffffffffffff000daeb61500000000
[    21.108] (II) intel(0): 	02160104902213780ad1f5935d599026
[    21.108] (II) intel(0): 	1d505400000001010101010101010101
[    21.108] (II) intel(0): 	010101010101d81d56e150002030442d
[    21.108] (II) intel(0): 	470058c11000001ae71356e150002030
[    21.108] (II) intel(0): 	442d470058c11000001a000000000000
[    21.108] (II) intel(0): 	00000000000000000000000000000002
[    21.108] (II) intel(0): 	000c4cff0a3c6410121e64000000004c
[    21.108] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    21.108] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    21.108] (II) intel(0): Printing probed modes for output LVDS1
[    21.108] (II) intel(0): Modeline "1366x768"x60.0   76.40  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (48.0 kHz eP)
[    21.108] (II) intel(0): Modeline "1366x768"x40.0   50.95  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (32.0 kHz e)
[    21.108] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    21.108] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    21.108] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    21.108] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    21.108] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    21.108] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    21.124] (II) intel(0): EDID for output VGA1
[    21.140] (II) intel(0): EDID for output HDMI1
[    21.188] (II) intel(0): EDID for output DP1
[    21.188] (II) intel(0): Output LVDS1 connected
[    21.188] (II) intel(0): Output VGA1 disconnected
[    21.188] (II) intel(0): Output HDMI1 disconnected
[    21.188] (II) intel(0): Output DP1 disconnected
[    21.188] (II) intel(0): Using exact sizes for initial modes
[    21.188] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    21.188] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    21.188] (==) intel(0): DPI set to (96, 96)
[    21.188] (II) Loading sub module "dri2"
[    21.188] (II) LoadModule: "dri2"
[    21.188] (II) Module "dri2" already built-in
[    21.188] (II) UnloadModule: "vesa"
[    21.188] (II) Unloading vesa
[    21.188] (II) UnloadModule: "modesetting"
[    21.188] (II) Unloading modesetting
[    21.188] (II) UnloadModule: "fbdev"
[    21.188] (II) Unloading fbdev
[    21.188] (II) UnloadSubModule: "fbdevhw"
[    21.188] (II) Unloading fbdevhw
[    21.188] (==) Depth 24 pixmap format is 32 bpp
[    21.445] (II) intel(0): SNA initialized with SandyBridge backend
[    21.445] (==) intel(0): Backing store disabled
[    21.445] (==) intel(0): Silken mouse enabled
[    21.445] (II) intel(0): HW Cursor enabled
[    21.445] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.457] (==) intel(0): DPMS enabled
[    21.457] (II) intel(0): [DRI2] Setup complete
[    21.457] (II) intel(0): [DRI2]   DRI driver: i965
[    21.457] (II) intel(0): direct rendering: DRI2 Enabled
[    21.457] (==) intel(0): hotplug detection: "enabled"
[    21.457] (--) RandR disabled
[    21.544] (II) SELinux: Disabled on system
[    21.567] (EE) GLX error: Can not get required symbols.
[    21.568] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[    21.592] (II) intel(0): Setting screen physical size to 361 x 203
[    21.863] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    21.871] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    21.871] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.871] (II) LoadModule: "evdev"
[    21.886] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.924] (II) Module evdev: vendor="X.Org Foundation"
[    21.924] 	compiled for 1.13.3, module version = 2.7.3
[    21.924] 	Module class: X.Org XInput Driver
[    21.924] 	ABI class: X.Org XInput driver, version 18.0
[    21.924] (II) Using input driver 'evdev' for 'Power Button'
[    21.924] (**) Power Button: always reports core events
[    21.924] (**) evdev: Power Button: Device: "/dev/input/event2"
[    21.924] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.924] (--) evdev: Power Button: Found keys
[    21.924] (II) evdev: Power Button: Configuring as keyboard
[    21.924] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    21.924] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.924] (**) Option "xkb_rules" "evdev"
[    21.924] (**) Option "xkb_model" "pc105"
[    21.924] (**) Option "xkb_layout" "fr"
[    21.924] (**) Option "xkb_variant" "latin9"
[    21.927] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[    21.938] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    21.938] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    21.938] (II) Using input driver 'evdev' for 'Video Bus'
[    21.938] (**) Video Bus: always reports core events
[    21.938] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    21.938] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    21.938] (--) evdev: Video Bus: Found keys
[    21.938] (II) evdev: Video Bus: Configuring as keyboard
[    21.938] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input8/event8"
[    21.938] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    21.938] (**) Option "xkb_rules" "evdev"
[    21.938] (**) Option "xkb_model" "pc105"
[    21.938] (**) Option "xkb_layout" "fr"
[    21.938] (**) Option "xkb_variant" "latin9"
[    21.939] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    21.939] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.939] (II) Using input driver 'evdev' for 'Power Button'
[    21.939] (**) Power Button: always reports core events
[    21.939] (**) evdev: Power Button: Device: "/dev/input/event0"
[    21.939] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.939] (--) evdev: Power Button: Found keys
[    21.939] (II) evdev: Power Button: Configuring as keyboard
[    21.939] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[    21.939] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    21.939] (**) Option "xkb_rules" "evdev"
[    21.939] (**) Option "xkb_model" "pc105"
[    21.939] (**) Option "xkb_layout" "fr"
[    21.939] (**) Option "xkb_variant" "latin9"
[    21.939] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    21.939] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    21.940] (II) Using input driver 'evdev' for 'Video Bus'
[    21.940] (**) Video Bus: always reports core events
[    21.940] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    21.940] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    21.940] (--) evdev: Video Bus: Found keys
[    21.940] (II) evdev: Video Bus: Configuring as keyboard
[    21.940] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input7/event7"
[    21.940] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    21.940] (**) Option "xkb_rules" "evdev"
[    21.940] (**) Option "xkb_model" "pc105"
[    21.940] (**) Option "xkb_layout" "fr"
[    21.940] (**) Option "xkb_variant" "latin9"
[    21.940] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    21.940] (II) No input driver specified, ignoring this device.
[    21.940] (II) This device may have been added with another device file.
[    21.941] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    21.941] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    21.941] (II) config/udev: Adding input device HID 04d9:0461 (/dev/input/event4)
[    21.941] (**) HID 04d9:0461: Applying InputClass "evdev pointer catchall"
[    21.941] (II) Using input driver 'evdev' for 'HID 04d9:0461'
[    21.941] (**) HID 04d9:0461: always reports core events
[    21.941] (**) evdev: HID 04d9:0461: Device: "/dev/input/event4"
[    21.941] (--) evdev: HID 04d9:0461: Vendor 0x4d9 Product 0x461
[    21.941] (--) evdev: HID 04d9:0461: Found 9 mouse buttons
[    21.941] (--) evdev: HID 04d9:0461: Found scroll wheel(s)
[    21.941] (--) evdev: HID 04d9:0461: Found relative axes
[    21.941] (--) evdev: HID 04d9:0461: Found x and y relative axes
[    21.941] (II) evdev: HID 04d9:0461: Configuring as mouse
[    21.941] (II) evdev: HID 04d9:0461: Adding scrollwheel support
[    21.941] (**) evdev: HID 04d9:0461: YAxisMapping: buttons 4 and 5
[    21.941] (**) evdev: HID 04d9:0461: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input4/event4"
[    21.941] (II) XINPUT: Adding extended input device "HID 04d9:0461" (type: MOUSE, id 10)
[    21.941] (II) evdev: HID 04d9:0461: initialized for relative axes.
[    21.942] (**) HID 04d9:0461: (accel) keeping acceleration scheme 1
[    21.942] (**) HID 04d9:0461: (accel) acceleration profile 0
[    21.942] (**) HID 04d9:0461: (accel) acceleration factor: 2.000
[    21.942] (**) HID 04d9:0461: (accel) acceleration threshold: 4
[    21.942] (II) config/udev: Adding input device HID 04d9:0461 (/dev/input/mouse0)
[    21.942] (II) No input driver specified, ignoring this device.
[    21.942] (II) This device may have been added with another device file.
[    21.942] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event13)
[    21.942] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[    21.942] (II) Using input driver 'evdev' for 'HP Truevision HD'
[    21.942] (**) HP Truevision HD: always reports core events
[    21.942] (**) evdev: HP Truevision HD: Device: "/dev/input/event13"
[    21.942] (--) evdev: HP Truevision HD: Vendor 0x64e Product 0xc33c
[    21.942] (--) evdev: HP Truevision HD: Found keys
[    21.942] (II) evdev: HP Truevision HD: Configuring as keyboard
[    21.942] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input13/event13"
[    21.942] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 11)
[    21.942] (**) Option "xkb_rules" "evdev"
[    21.942] (**) Option "xkb_model" "pc105"
[    21.942] (**) Option "xkb_layout" "fr"
[    21.942] (**) Option "xkb_variant" "latin9"
[    21.943] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    21.943] (II) No input driver specified, ignoring this device.
[    21.943] (II) This device may have been added with another device file.
[    21.943] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    21.943] (II) No input driver specified, ignoring this device.
[    21.943] (II) This device may have been added with another device file.
[    21.944] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    21.944] (II) No input driver specified, ignoring this device.
[    21.944] (II) This device may have been added with another device file.
[    21.944] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    21.944] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    21.944] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    21.944] (**) AT Translated Set 2 keyboard: always reports core events
[    21.944] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    21.944] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    21.944] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    21.944] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    21.944] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    21.944] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    21.944] (**) Option "xkb_rules" "evdev"
[    21.944] (**) Option "xkb_model" "pc105"
[    21.944] (**) Option "xkb_layout" "fr"
[    21.944] (**) Option "xkb_variant" "latin9"
[    21.944] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[    21.944] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    21.944] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    21.944] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    21.944] (II) LoadModule: "synaptics"
[    21.945] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    21.965] (II) Module synaptics: vendor="X.Org Foundation"
[    21.965] 	compiled for 1.13.1.901, module version = 1.6.2
[    21.965] 	Module class: X.Org XInput Driver
[    21.965] 	ABI class: X.Org XInput driver, version 18.0
[    21.965] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    21.965] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    21.965] (**) Option "Device" "/dev/input/event12"
[    21.972] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5684
[    21.972] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4862
[    21.972] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    21.972] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    21.972] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    21.972] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    21.972] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    21.972] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    21.976] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[    21.976] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    21.976] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    21.976] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    21.976] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[    21.976] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    21.976] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    21.976] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    21.976] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    21.976] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    21.977] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    21.977] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    21.977] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[    21.977] (II) No input driver specified, ignoring this device.
[    21.977] (II) This device may have been added with another device file.
[    21.977] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    21.977] (II) No input driver specified, ignoring this device.
[    21.977] (II) This device may have been added with another device file.
[    21.979] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[    21.979] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    21.979] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    21.980] (**) HP WMI hotkeys: always reports core events
[    21.980] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[    21.980] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    21.980] (--) evdev: HP WMI hotkeys: Found keys
[    21.980] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    21.980] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[    21.980] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[    21.980] (**) Option "xkb_rules" "evdev"
[    21.980] (**) Option "xkb_model" "pc105"
[    21.980] (**) Option "xkb_layout" "fr"
[    21.980] (**) Option "xkb_variant" "latin9"
[    43.837] (II) intel(0): EDID vendor "CMN", prod id 5558
[    43.837] (II) intel(0): Printing DDC gathered Modelines:
[    43.837] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (48.0 kHz eP)
[    43.837] (II) intel(0): Modeline "1366x768"x0.0   50.95  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (32.0 kHz e)
[    43.916] (II) intel(0): EDID vendor "CMN", prod id 5558
[    43.916] (II) intel(0): Printing DDC gathered Modelines:
[    43.916] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (48.0 kHz eP)
[    43.916] (II) intel(0): Modeline "1366x768"x0.0   50.95  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (32.0 kHz e)
[    45.249] (II) intel(0): EDID vendor "CMN", prod id 5558
[    45.250] (II) intel(0): Printing DDC gathered Modelines:
[    45.250] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (48.0 kHz eP)
[    45.250] (II) intel(0): Modeline "1366x768"x0.0   50.95  1366 1434 1479 1591  768 772 779 800 +hsync -vsync (32.0 kHz e)

Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#9 Le 30/04/2013, à 15:04

fcn50

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Perso je suis en 12.04 avec UNE CG et aucun soucis. Le lien c'est la doc pour les commutables, je n'utilise pas. Pour xorg.conf:

sudo aticonfig --initial -f

Tu reboot entre les install différentes?


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#10 Le 01/05/2013, à 11:38

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

C'est quand je fais le aticonfig que ca plante...

Déjà, je ne comprend pas 2 choses : l'installation du pilote propriétaire se passe bien, mais catalyst me dit que la carte amd n'est pas installée.

Quand à l'accélération de la carte intel, eh beh :

~$ glxinfo | grep "direct rendering"
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  153 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12

Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#11 Le 01/05/2013, à 13:26

fcn50

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Et fglrxinfo?


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#12 Le 01/05/2013, à 16:14

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Idem

~$ fglrxinfo
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  153 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12

Le pire est que mon affichage est tout à fait correct pour un usage bureautique

Dernière modification par nam1962 (Le 01/05/2013, à 16:17)


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#13 Le 02/05/2013, à 08:13

fcn50

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Je viens de voir que catalyst 13.4 supporte la version 12.10 pas la 13.04! Regarde la release note.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#14 Le 02/05/2013, à 08:34

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Je vais donc attendre..
Pourtant, il semble y avoir un package Raring : http://wiki.cchtml.com/index.php/Ubuntu … st.2Ffglrx

Par contre, ça n'explique pas que je ne trouve pas comment activer l'accélération matérielle de la Intel...


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#15 Le 02/05/2013, à 08:47

fcn50

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Tu peux toujours essayer, pour intel, no idee...


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#16 Le 02/05/2013, à 08:59

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

J'ai essayé, ça a planté, donc j'attends pour AMD.
Pour intel, je continue à chercher...

J'ai çà, mais je ne sais ce que ça signifie :

~$ lspci -vvnn | grep VGA
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames XT [Radeon HD 7670M] [1002:6840] (prog-if 00 [VGA controller])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Sinon, j'ai bien repéré çà, mais pas à jour pour la 13.04 non plus, snif ! https://01.org/linuxgraphics/downloads/ … -installer

Dernière modification par nam1962 (Le 02/05/2013, à 09:21)


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#17 Le 18/05/2013, à 09:19

nam1962

Re : hybride AMD/Intel sur HP Envy M6 - comment installer ?

Bon, ça avance petit à petit, mes affaires : j'ai l'accélération matérielle Intel de puis ce matin - il fallait installer xserver-xorg-video-intel puis attendre la maj qui va bien... (Genre, les pilotes, c'est comme les DNS, faut attendre la propagation - pas acheter un truc dernière génération pour du Ubuntu, houlà !)
Pour la AMD, toujours rien (et toujours pas bien compris comment gérer l'hybride, genre si il y a un équivalent de Bumblebee pour intel/amd.)


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

Haut de page ↑