Ubuntu-fr

rascal76160

liseuse cybook probleme calibre

bonjour
je ne peux plus connecter ma liseuse
avec calibre
voila ce qui est ecrit  et la je vous avoue mon inculture
merci de votre aide
[Errno 30] Système de fichiers accessible en lecture seulement: u'/media/pascal/Cybook/metadata.calibre'

Traceback (most recent call last):
  File "/usr/lib/calibre/calibre/gui2/device.py", line 85, in run
    self.result = self.func(*self.args, **self.kwargs)
  File "/usr/lib/calibre/calibre/gui2/device.py", line 470, in _books
    mainlist = self.device.books(oncard=None, end_session=False)
  File "/usr/lib/calibre/calibre/devices/usbms/driver.py", line 246, in books
    self.sync_booklists((bl, None, None))
  File "/usr/lib/calibre/calibre/devices/usbms/driver.py", line 391, in sync_booklists
    write_prefix(self._main_prefix, 0)
  File "/usr/lib/calibre/calibre/devices/usbms/driver.py", line 389, in write_prefix
    with open(self.normalize_path(os.path.join(prefix, self.METADATA_CACHE)), 'wb') as f:
IOError: [Errno 30] Système de fichiers accessible en lecture seulement: u'/media/pascal/Cybook/metadata.calibre'

gl38

Re : liseuse cybook probleme calibre

As-tu essayé d'éteindre ta liseuse et de la rallumer ?
Est-ce qu'elle fonctionne correctement toute seule ?
Visiblement tu n'as pas installé calibre depuis le site de l'auteur, ce qui pourtant est très fortement recommandé et très facile.
Cordialement,
Guy

rascal76160

Re : liseuse cybook probleme calibre

merci d avoir repondu si vite
la machine fonctionne tres bien seule le seul probleme est que  je ne peux plus rien mettre dessus je vais desintaller et reinstaller a partir du site et je vous tiens au courant

rascal76160

Re : liseuse cybook probleme calibre

apres reinstallation
resultat identique
[Errno 30] Système de fichiers accessible en lecture seulement: '/media/pascal/Cybook/Digital Editions/Saldmann, Frederic'

Traceback (most recent call last):
  File "site-packages/calibre/gui2/device.py", line 85, in run
  File "site-packages/calibre/gui2/device.py", line 557, in _upload_books
  File "site-packages/calibre/devices/usbms/driver.py", line 266, in upload_books
  File "site-packages/calibre/devices/usbms/device.py", line 1053, in create_upload_path
  File "os.py", line 157, in makedirs
OSError: [Errno 30] Système de fichiers accessible en lecture seulement: '/media/pascal/Cybook/Digital Editions/Saldmann, Frederic'

gl38

Re : liseuse cybook probleme calibre

As-tu essayé de redémarrer l'ordinateur ?
Le disque de la liseuse doit apparaître aussi sur le bureau.  Que dit la commande dmesg quand tu branches la liseuse sur le port usb ?
Cordialement,
Guy

rascal76160

Re : liseuse cybook probleme calibre

chinois pour moi desole

[    0.463477] Freeing initrd memory: 15672k freed
[    0.471213] Initialise module verification
[    0.471263] audit: initializing netlink socket (disabled)
[    0.471278] type=2000 audit(1377435001.467:1): initialized
[    0.493831] bounce pool size: 64 pages
[    0.493844] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.495510] VFS: Disk quotas dquot_6.5.2
[    0.495562] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.496195] fuse init (API version 7.20)
[    0.496290] msgmni has been set to 1719
[    0.496737] Key type asymmetric registered
[    0.496740] Asymmetric key parser 'x509' registered
[    0.496784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.496816] io scheduler noop registered
[    0.496818] io scheduler deadline registered (default)
[    0.496826] io scheduler cfq registered
[    0.496985] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.497087] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.497206] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.497323] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.497429] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.497432] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.497436] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.497456] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.497460] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.497482] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.497484] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.497489] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.497508] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.497511] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.497515] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.497533] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.497576] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 1462 ss_did 7360
[    0.497599] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    0.497611] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 1462 ss_did 7360
[    0.497631] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[    0.497643] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 1462 ss_did 7360
[    0.497663] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[    0.497670] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.497753] intel_idle: does not run on family 6 model 15
[    0.497828] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.497834] ACPI: Power Button [PWRB]
[    0.497877] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.497880] ACPI: Power Button [PWRF]
[    0.501241] GHES: HEST is not enabled!
[    0.501272] isapnp: Scanning for PnP cards...
[    0.501335] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.521741] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.523097] Linux agpgart interface v0.103
[    0.524678] brd: module loaded
[    0.525410] loop: module loaded
[    0.525541] ata_piix 0000:00:1f.2: version 2.13
[    0.525556] ata_piix 0000:00:1f.2: MAP [
[    0.525558]  P0 -- P1 -- ]
[    0.525602] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.525801] scsi0 : ata_piix
[    0.528028] scsi1 : ata_piix
[    0.528638] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.528641] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.528664] ata_piix 0000:00:1f.5: MAP [
[    0.528665]  P0 -- P1 -- ]
[    0.528704] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.528890] scsi2 : ata_piix
[    0.529426] scsi3 : ata_piix
[    0.530032] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.530035] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.530353] libphy: Fixed MDIO Bus: probed
[    0.530432] tun: Universal TUN/TAP device driver, 1.6
[    0.530434] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.530484] PPP generic driver version 2.4.2
[    0.530526] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.530528] ehci-pci: EHCI PCI platform driver
[    0.530559] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    0.530563] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.530570] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.530584] ehci-pci 0000:00:1a.7: debug port 1
[    0.534486] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.534503] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    0.544021] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.544057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.544060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.544063] usb usb1: Product: EHCI Host Controller
[    0.544065] usb usb1: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[    0.544068] usb usb1: SerialNumber: 0000:00:1a.7
[    0.544182] hub 1-0:1.0: USB hub found
[    0.544187] hub 1-0:1.0: 4 ports detected
[    0.544301] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.544305] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.544311] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.544324] ehci-pci 0000:00:1d.7: debug port 1
[    0.548222] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.548238] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    0.560023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.560042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.560044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.560047] usb usb2: Product: EHCI Host Controller
[    0.560049] usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[    0.560052] usb usb2: SerialNumber: 0000:00:1d.7
[    0.560147] hub 2-0:1.0: USB hub found
[    0.560152] hub 2-0:1.0: 8 ports detected
[    0.560301] ehci-platform: EHCI generic platform driver
[    0.560312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.560335] uhci_hcd: USB Universal Host Controller Interface driver
[    0.560360] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.560364] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.560371] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.560406] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[    0.560438] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.560441] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.560443] usb usb3: Product: UHCI Host Controller
[    0.560446] usb usb3: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[    0.560448] usb usb3: SerialNumber: 0000:00:1a.0
[    0.560543] hub 3-0:1.0: USB hub found
[    0.560547] hub 3-0:1.0: 2 ports detected
[    0.560635] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.560639] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.560644] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.560676] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.560706] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.560709] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.560712] usb usb4: Product: UHCI Host Controller
[    0.560714] usb usb4: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[    0.560717] usb usb4: SerialNumber: 0000:00:1a.1
[    0.560806] hub 4-0:1.0: USB hub found
[    0.560810] hub 4-0:1.0: 2 ports detected
[    0.560888] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.560891] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.560897] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.560919] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[    0.560948] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.560951] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.560953] usb usb5: Product: UHCI Host Controller
[    0.560956] usb usb5: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[    0.560958] usb usb5: SerialNumber: 0000:00:1d.0
[    0.561045] hub 5-0:1.0: USB hub found
[    0.561049] hub 5-0:1.0: 2 ports detected
[    0.561127] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.561131] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.561138] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.561160] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
[    0.561190] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.561193] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.561195] usb usb6: Product: UHCI Host Controller
[    0.561198] usb usb6: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[    0.561200] usb usb6: SerialNumber: 0000:00:1d.1
[    0.561287] hub 6-0:1.0: USB hub found
[    0.561291] hub 6-0:1.0: 2 ports detected
[    0.561369] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.561372] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.561377] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.561399] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[    0.561429] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.561432] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.561435] usb usb7: Product: UHCI Host Controller
[    0.561437] usb usb7: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[    0.561440] usb usb7: SerialNumber: 0000:00:1d.2
[    0.561527] hub 7-0:1.0: USB hub found
[    0.561531] hub 7-0:1.0: 2 ports detected
[    0.561609] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.561613] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.561618] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.561642] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b080
[    0.561672] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.561675] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.561678] usb usb8: Product: UHCI Host Controller
[    0.561680] usb usb8: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[    0.561683] usb usb8: SerialNumber: 0000:00:1d.3
[    0.561771] hub 8-0:1.0: USB hub found
[    0.561775] hub 8-0:1.0: 2 ports detected
[    0.561935] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.564295] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.564303] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.564420] mousedev: PS/2 mouse device common for all mice
[    0.564548] rtc_cmos 00:02: RTC can wake from S4
[    0.564656] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.564679] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    0.564787] device-mapper: uevent: version 1.0.3
[    0.564856] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    0.564877] EISA: Probing bus 0 at eisa.0
[    0.564879] EISA: Cannot allocate resource for mainboard
[    0.564881] Cannot allocate resource for EISA slot 1
[    0.564883] Cannot allocate resource for EISA slot 2
[    0.564885] Cannot allocate resource for EISA slot 3
[    0.564887] Cannot allocate resource for EISA slot 4
[    0.564888] Cannot allocate resource for EISA slot 5
[    0.564890] Cannot allocate resource for EISA slot 6
[    0.564892] Cannot allocate resource for EISA slot 7
[    0.564894] Cannot allocate resource for EISA slot 8
[    0.564895] EISA: Detected 0 cards.
[    0.564906] cpufreq-nforce2: No nForce2 chipset.
[    0.564908] cpuidle: using governor ladder
[    0.564910] cpuidle: using governor menu
[    0.564914] ledtrig-cpu: registered to indicate activity on CPUs
[    0.564916] EFI Variables Facility v0.08 2004-May-17
[    0.565093] ashmem: initialized
[    0.565223] TCP: cubic registered
[    0.565334] NET: Registered protocol family 10
[    0.565539] NET: Registered protocol family 17
[    0.565555] Key type dns_resolver registered
[    0.565722] Using IPI No-Shortcut mode
[    0.565794] Loading module verification certificates
[    0.570048] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 8f5f30c1088782cc8401b78bb07901c48bf1679c'
[    0.570068] registered taskstats version 1
[    0.572725] Key type trusted registered
[    0.575021] Key type encrypted registered
[    0.577722] rtc_cmos 00:02: setting system clock to 2013-08-25 12:50:01 UTC (1377435001)
[    0.577784] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.577786] EDD information not available.
[    0.854273] isapnp: No Plug & Play device found
[    0.862741] ata3: SATA link down (SStatus 0 SControl 300)
[    0.972022] usb 1-3: new high-speed USB device number 4 using ehci-pci
[    1.008067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.008069] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.008175] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.016324] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
[    1.017258] ata2.00: ATA-8: WDC WD2500AAJS-00L7A0, 01.03E01, max UDMA/133
[    1.017261] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.032184] ata4.00: configured for UDMA/100
[    1.033289] ata2.00: configured for UDMA/133
[    1.056422] ata1.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133
[    1.056425] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.104926] usb 1-3: New USB device found, idVendor=03f0, idProduct=8911
[    1.104929] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.104932] usb 1-3: Product: Deskjet 1050 J410 series
[    1.104934] usb 1-3: Manufacturer: HP
[    1.104937] usb 1-3: SerialNumber: CN1AR11NKY05QT
[    1.123061] ata1.00: configured for UDMA/133
[    1.123194] scsi 0:0:0:0: Direct-Access     ATA      ST3808110AS      3.AA PQ: 0 ANSI: 5
[    1.123320] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.123343] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.123374] sd 0:0:0:0: [sda] Write Protect is off
[    1.123377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.123401] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.123483] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-0 01.0 PQ: 0 ANSI: 5
[    1.123614] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.123690] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.123708] sd 1:0:0:0: [sdb] Write Protect is off
[    1.123711] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.123735] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.127218] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL01 PQ: 0 ANSI: 5
[    1.135687] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.135691] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.135802] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.135902] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    1.163077]  sda: sda1
[    1.163325] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.166285]  sdb: sdb1 sdb2 < sdb5 >
[    1.166614] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.166682] Freeing unused kernel memory: 788k freed
[    1.166953] Write protecting the kernel text: 6260k
[    1.167031] Write protecting the kernel read-only data: 2436k
[    1.167033] NX-protecting the kernel data: 3980k
[    1.181739] udevd[103]: starting version 175
[    1.258340] Disabling lock debugging due to kernel taint
[    1.269351] Floppy drive(s): fd0 is 1.44M
[    1.270173] ahci 0000:03:00.0: version 3.0
[    1.279287] scsi4 : pata_marvell
[    1.280333] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.280560] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[    1.280754] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xf841a000, 00:21:85:3a:6f:ec, XID 18000000 IRQ 44
[    1.280757] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    1.280790] scsi5 : pata_marvell
[    1.280847] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[    1.280850] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[    1.287714] FDC 0 is a post-1991 82077
[    1.468024] tsc: Refined TSC clocksource calibration: 2200.769 MHz
[    1.468031] Switching to clocksource tsc
[    1.860021] usb 2-4: new high-speed USB device number 2 using ehci-pci
[    2.003405] usb 2-4: New USB device found, idVendor=0525, idProduct=a4a5
[    2.003408] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.003411] usb 2-4: Product: File-backed Storage Gadget
[    2.003414] usb 2-4: Manufacturer: Linux 2.6.32.7 with musb_hdrc
[    2.003416] usb 2-4: SerialNumber: 3230204E6F76
[    2.011709] Initializing USB Mass Storage driver...
[    2.011819] usb-storage 2-4:1.0: Quirks match for vid 0525 pid a4a5: 10000
[    2.011841] scsi6 : usb-storage 2-4:1.0
[    2.011928] usbcore: registered new interface driver usb-storage
[    2.011931] USB Mass Storage support registered.
[    2.248014] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    2.425440] usb 3-1: New USB device found, idVendor=0603, idProduct=00f2
[    2.425444] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.425446] usb 3-1: Product: USB Keyboard
[    2.425449] usb 3-1: Manufacturer: NOVATEK
[    2.481500] usbcore: registered new interface driver usbhid
[    2.481503] usbhid: USB HID core driver
[    2.488794] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
[    2.489074] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1a.0-1/input0
[    2.503518] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input3
[    2.503652] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1a.0-1/input1
[    2.668014] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[    2.842439] usb 3-2: New USB device found, idVendor=046d, idProduct=c05f
[    2.842443] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.842445] usb 3-2: Product: USB Optical Mouse
[    2.842448] usb 3-2: Manufacturer: Logitech
[    2.858924] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4
[    2.859044] hid-generic 0003:046D:C05F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-2/input0
[    3.010680] scsi 6:0:0:0: Direct-Access     Linux    File-Stor Gadget 0316 PQ: 0 ANSI: 2
[    3.012673] scsi 6:0:0:1: Direct-Access     Linux    File-Stor Gadget 0316 PQ: 0 ANSI: 2
[    3.013254] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    3.013424] sd 6:0:0:1: Attached scsi generic sg4 type 0
[    3.027047] sd 6:0:0:0: [sdc] 2698920 512-byte logical blocks: (1.38 GB/1.28 GiB)
[    3.031302] sd 6:0:0:0: [sdc] Write Protect is off
[    3.031308] sd 6:0:0:0: [sdc] Mode Sense: 0f 00 00 00
[    3.034038] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.036797] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[    3.039363]  sdc:
[    3.041801] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.096020] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    3.290710] usb 4-2: New USB device found, idVendor=046d, idProduct=0a07
[    3.290715] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.290718] usb 4-2: Product: Z-10 USB Speaker
[    3.290721] usb 4-2: Manufacturer: Logitech
[    3.300802] hid-generic 0003:046D:0A07.0004: hiddev0,hidraw3: USB HID v1.10 Device [Logitech Z-10 USB Speaker] on usb-0000:00:1a.1-2/input2
[    3.303766] input: Logitech Z-10 USB Speaker as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.3/input/input5
[    3.303863] hid-generic 0003:046D:0A07.0005: input,hidraw4: USB HID v1.10 Device [Logitech Z-10 USB Speaker] on usb-0000:00:1a.1-2/input3
[    6.412389] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
[    6.412394] EXT4-fs (sdb1): write access will be enabled during recovery
[    8.599453] EXT4-fs (sdb1): recovery complete
[    8.606461] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   19.571261] Adding 2095100k swap on /dev/sdb5.  Priority:-1 extents:1 across:2095100k
[   19.669698] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.725945] udevd[349]: starting version 175
[   19.998117] lp: driver loaded but no devices found
[   19.999967] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
[   20.040542] [drm] Initialized drm 1.1.0 20060810
[   20.104239] type=1400 audit(1377435021.023:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=506 comm="apparmor_parser"
[   20.104251] type=1400 audit(1377435021.023:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=440 comm="apparmor_parser"
[   20.104721] type=1400 audit(1377435021.023:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=506 comm="apparmor_parser"
[   20.104731] type=1400 audit(1377435021.023:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=440 comm="apparmor_parser"
[   20.104973] type=1400 audit(1377435021.023:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=506 comm="apparmor_parser"
[   20.104986] type=1400 audit(1377435021.023:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=440 comm="apparmor_parser"
[   20.108367] wmi: Mapper loaded
[   20.211325] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x084200a2
[   20.211331] nouveau  [  DEVICE][0000:01:00.0] Chipset: G84 (NV84)
[   20.211333] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[   20.220425] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   20.262667] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   20.262673] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[   20.262822] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   20.262826] nouveau  [   VBIOS][0000:01:00.0] version 60.84.35.00.12
[   20.305859] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR3
[   20.305865] nouveau  [     PFB][0000:01:00.0] RAM size: 256 MiB
[   20.305867] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 1892 tags
[   20.325275] parport_pc 00:07: reported by Plug and Play ACPI
[   20.325323] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   20.415314] gpio_ich: GPIO from 195 to 255 on gpio_ich
[   20.418983] [TTM] Zone  kernel: Available graphics memory: 440604 kiB
[   20.418988] [TTM] Zone highmem: Available graphics memory: 1032320 kiB
[   20.418990] [TTM] Initializing pool allocator
[   20.418996] [TTM] Initializing DMA pool allocator
[   20.419505] nouveau  [     DRM] VRAM: 256 MiB
[   20.419509] nouveau  [     DRM] GART: 512 MiB
[   20.419514] nouveau  [     DRM] BIT BIOS found
[   20.419517] nouveau  [     DRM] Bios version 60.84.35.00
[   20.419522] nouveau  [     DRM] TMDS table version 2.0
[   20.419524] nouveau  [     DRM] DCB version 4.0
[   20.419527] nouveau  [     DRM] DCB outp 00: 02000300 00000028
[   20.419531] nouveau  [     DRM] DCB outp 01: 01000302 00020030
[   20.419533] nouveau  [     DRM] DCB outp 02: 04011310 00000028
[   20.419536] nouveau  [     DRM] DCB outp 03: 02011312 00000030
[   20.419538] nouveau  [     DRM] DCB outp 04: 010223f1 00c0c083
[   20.419541] nouveau  [     DRM] DCB conn 00: 2030
[   20.419545] nouveau  [     DRM] DCB conn 01: 1130
[   20.419547] nouveau  [     DRM] DCB conn 02: 0210
[   20.419550] nouveau  [     DRM] DCB conn 03: 0211
[   20.419552] nouveau  [     DRM] DCB conn 04: 0213
[   20.420669] lp0: using parport0 (interrupt-driven).
[   20.436110] nouveau W[     DRM] skipping unsupported encoder 1/0
[   20.436115] nouveau W[     DRM] TV-1 has no encoders, removing
[   20.436139] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   20.436141] [drm] No driver support for vblank timestamp query.
[   20.437125] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
[   20.448766] ppdev: user-space parallel port driver
[   20.473076] nouveau  [     DRM] 1 available performance level(s)
[   20.473083] nouveau  [     DRM] 0: core 540MHz shader 1180MHz memory 700MHz fanspeed 100%
[   20.473087] nouveau  [     DRM] c: core 540MHz shader 1188MHz memory 702MHz voltage 1200mV fanspeed 100%
[   20.485454] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   20.489713] nouveau  [     DRM] MM: using CRYPT for buffer copies
[   20.490365] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   20.505123] coretemp coretemp.0: Using relative temperature scale!
[   20.505145] coretemp coretemp.0: Using relative temperature scale!
[   20.568696] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   20.568791] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   20.568866] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   20.568941] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   20.569145] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   20.569248] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   20.569326] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   20.569400] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   20.590773] nouveau  [     DRM] allocated 1920x1080 fb: 0x70000, bo f00ca000
[   20.590879] fbcon: nouveaufb (fb0) is primary device
[   20.624661] Console: switching to colour frame buffer device 240x67
[   20.626125] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   20.626128] nouveau 0000:01:00.0: registered panic notifier
[   20.626134] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[   20.693719] usb_audio: Warning! Unlikely big volume range (=704), cval->res is probably wrong.
[   20.693724] usb_audio: [1] FU [PCM Playback Volume] ch = 2, val = -10496/768/16<6>[   20.694125] usbcore: registered new interface driver snd-usb-audio
[   22.116459] usblp 1-3:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8911
[   22.116564] usbcore: registered new interface driver usblp
[   23.553648] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   23.967402] init: failsafe main process (828) killed by TERM signal
[   24.277381] Bluetooth: Core ver 2.16
[   24.277403] NET: Registered protocol family 31
[   24.277404] Bluetooth: HCI device and connection manager initialized
[   24.277413] Bluetooth: HCI socket layer initialized
[   24.277417] Bluetooth: L2CAP socket layer initialized
[   24.277423] Bluetooth: SCO socket layer initialized
[   24.285537] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.285542] Bluetooth: BNEP filters: protocol multicast
[   24.285552] Bluetooth: BNEP socket layer initialized
[   24.305234] Bluetooth: RFCOMM TTY layer initialized
[   24.305247] Bluetooth: RFCOMM socket layer initialized
[   24.305249] Bluetooth: RFCOMM ver 1.11
[   24.383503] type=1400 audit(1377435025.299:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=912 comm="apparmor_parser"
[   24.383517] type=1400 audit(1377435025.299:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=913 comm="apparmor_parser"
[   24.383879] type=1400 audit(1377435025.299:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=912 comm="apparmor_parser"
[   24.383889] type=1400 audit(1377435025.299:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=913 comm="apparmor_parser"
[   24.855335] init: avahi-cups-reload main process (989) terminated with status 1
[   27.001299] r8169 0000:04:00.0 eth0: link down
[   27.001367] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.001630] r8169 0000:04:00.0 eth0: link down
[   27.001739] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.150492] r8169 0000:04:00.0 eth0: link up
[   29.150502] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   32.911726] delay: estimated 133, actual 0
[  138.848581] delay: estimated 353, actual 0
[  139.406926] delay: estimated 133, actual 0
pascal@pascal-MS-7360:~$

rascal76160

Re : liseuse cybook probleme calibre

si je vais dans l analyseur de gestion de disque il apparait bien

gl38

Re : liseuse cybook probleme calibre

Ce n'est pas trop clair, en effet !
Ce serait plus facile à lire entre des balises  qu'on obtient en cliquant au-dessus de la zone du nouveau message sur l’icône <>.
En tout cas je ne vois pas le nom du fabriquant, moi j'obtiens :

[513115.256523] usb 1-5: new high speed USB device using ehci_hcd and address 9
[513115.389749] usb 1-5: configuration #1 chosen from 1 choice
[513115.390718] scsi10 : SCSI emulation for USB Mass Storage devices
[513115.390854] usb-storage: device found at 9
[513115.390857] usb-storage: waiting for device to settle before scanning
[513120.388268] usb-storage: device scan complete
[513120.388882] scsi 10:0:0:0: Direct-Access     Bookeen  Flash Disk       0316 PQ: 0 ANSI: 2
[513120.389373] scsi 10:0:0:1: Direct-Access     Bookeen  Flash Disk       0316 PQ: 0 ANSI: 2
[513120.389881] sd 10:0:0:0: Attached scsi generic sg4 type 0
[513120.390062] sd 10:0:0:1: Attached scsi generic sg5 type 0
[513120.397867] sd 10:0:0:0: [sdd] 2698920 512-byte logical blocks: (1.38 GB/1.28 GiB)
[513120.398365] sd 10:0:0:0: [sdd] Write Protect is off
[513120.398369] sd 10:0:0:0: [sdd] Mode Sense: 0f 00 00 00
[513120.398372] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[513120.400756] sd 10:0:0:1: [sde] Attached SCSI removable disk
[513120.401985] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[513120.401990]  sdd:
[513120.420109] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[513120.420115] sd 10:0:0:0: [sdd] Attached SCSI removable disk

As-tu une mini-carte  SD dans la liseuse ?
Cordialement,
Guy

rascal76160

Re : liseuse cybook probleme calibre

merci pour tout cet interet et les reponses
j ai pris le portable a ma fille avec windows 7
il a detecte ma liseuse j ai fait un copier sur une cle usb des fichiers epub et maintenant je peux les lire sur ma liseuse
je n aie pas de carte sd
dommage pour unbuntu pour le probleme
et merci encore

marmouzdu

Re : liseuse cybook probleme calibre

Bonjour,
Je déterre un vieux sujet puisque j'ai eu le même problème il y a quelques jours.
La solution aller sur le blog de bookeen et télécharger la nouvelle mise à jour. Enfin ça marche pour la Cybook Odyssey.
Et quel gain de clarté dans l'interface beaucoup plus belle.
Tout est là : http://blog.bookeen.com/fr/maj-cybook-o … isponible/
Suivre la procédure indiquée par wifi seulement

Dernière modification par marmouzdu (Le 26/02/2015, à 15:04)