Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#1 Le 27/07/2007, à 23:41

$-Chink-$

Problème avec beryl !

Salut à tous !

J'ai installer en suivant la doc beryl !Il se lance bien tout marche ! mais quand je sélectionne "Sélectionner le gestionnaire de fenêtre => beryl " Mon écran clignote et il revient a Metacity !

J'ai fais un test comme dis dans la Doc :

chink@chink-desktop:~$ beryl  --test-only
**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : failed

No composite extension

j'ai installer les Pilotes propiètaires Proposer par Ubuntu Pour ma ATI X1550 !

Si vous avez une idée :s Je les prend volontiers !

Mercii

Linuxien en Herbe ! :p

Amd Semprom 2Ghz + 1Go DDR kingston + Ati X1550 512 Mo Ubuntu 7.04 Feisty Fawn :D:D

Hors ligne

#2 Le 28/07/2007, à 00:51

$-Chink-$

Re : Problème avec beryl !

p'tit up ^^

Linuxien en Herbe ! :p

Amd Semprom 2Ghz + 1Go DDR kingston + Ati X1550 512 Mo Ubuntu 7.04 Feisty Fawn :D:D

Hors ligne

#3 Le 28/07/2007, à 01:02

Syrion

Re : Problème avec beryl !

Dans la section "Screen" de /etc/X11/xorg.conf vérifie que tu aies bien

    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"

Si tu n'a pas ces 2 lignes, ajoutes-les.
Par exemple le début de ma section screen ressemble à ça :

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV40 [GeForce 6800 Series GPU]"
    Monitor        "SyncMaster"
    DefaultDepth    24
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"

Je tiens à te tirer les oreilles, car je n'ai pas inventé ce truc : je l'ai trouvé en cherchant.:cool:

Dernière modification par Syrion (Le 28/07/2007, à 01:03)

Ubuntu 22.04.4 amd64 sur Dell XPS 7590 15"
Ubuntu Server 20.04.4 Eeepc 1215P
Ubuntu 22.04.1 sur Ryzen 5 5600X, 32Go DDR4-3600, NVidia RTX 3060Ti

Hors ligne

#4 Le 28/07/2007, à 10:22

$-Chink-$

Re : Problème avec beryl !

j'ai ajouter mais je ne vois pas la différence ! Je vais rebooter je t'informe du résultat !

Linuxien en Herbe ! :p

Amd Semprom 2Ghz + 1Go DDR kingston + Ati X1550 512 Mo Ubuntu 7.04 Feisty Fawn :D:D

Hors ligne

#5 Le 28/07/2007, à 12:26

Facc

Re : Problème avec beryl !

salut

A mon avis il ne trouve pas l'extension composite

Dans xorg.conf rajoute a la fin

          Section "Extensions"
          Option "Composite" "Enable"
          EndSection

#6 Le 28/07/2007, à 12:29

jdefaver

Re : Problème avec beryl !

avec les drivers proprio il faut XGL

Hors ligne

#7 Le 29/07/2007, à 23:07

$-Chink-$

Re : Problème avec beryl !

oui c'est se que j'ai lu dans la doc mais je ne comprend pas trop comment cela s'installe ! si quelqu'un peux m'expliquer, j'accepte volontier ^^

Linuxien en Herbe ! :p

Amd Semprom 2Ghz + 1Go DDR kingston + Ati X1550 512 Mo Ubuntu 7.04 Feisty Fawn :D:D

Hors ligne

#8 Le 30/07/2007, à 07:48

jdefaver

Re : Problème avec beryl !

wiki -> XGL

pour les autres : c'est quoi cette idée de repondre sans avoir la moindre idée du probleme ? Apres on s'etonne que les nouveaux aient du mal a s'y retrouver...

Dernière modification par jdefaver (Le 30/07/2007, à 07:50)

Hors ligne

#9 Le 30/07/2007, à 18:10

Facc

Re : Problème avec beryl !

jdefaver   :

No composite extension

Apres avoir lu ca , ca ne me parais pas idiot d'essayer de

rajouter :

Code:

          Section "Extensions"
          Option "Composite" "Enable"
          EndSection

#10 Le 30/07/2007, à 19:39

SuperDuckWC

Re : Problème avec beryl !

Moi j'ai ce problème, peut être sont ils liés:
Capture.png

Dernière modification par SuperDuckWC (Le 30/07/2007, à 19:47)

Hors ligne

#11 Le 30/07/2007, à 19:49

poupoul2

Re : Problème avec beryl !

Essaie de nous faire une capture plus lisible, parce que là, pour t'aider, on est un peu sec hmm

#12 Le 30/07/2007, à 19:57

SuperDuckWC

Re : Problème avec beryl !

désolé mété trompé de fichier...vala je l'ai actualisé..., j'ai l'air d'avoir un pb de screen...

Dernière modification par SuperDuckWC (Le 30/07/2007, à 19:58)

Hors ligne

#13 Le 30/07/2007, à 20:18

poupoul2

Re : Problème avec beryl !

Il doit manquer quelque chose dans ton xorg pour que ça fonctionne. As tu consulté la doc? Quel driver utilises tu?

#14 Le 30/07/2007, à 21:54

Duanra

Re : Problème avec beryl !

Bonjour à tous,

je m'invite car j'ai aussi un petit problème avec Beryl : voila ce que j'obtiens après le test : 

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
Checking for non power of two texture support   : failed

Support for non power of two textures missing

Il me manque donc un support ; et en tant que nouveau venu, je n'ai aucune idée de ce qu'il faut faire ^^.

Merci à tous cool

Hors ligne

#15 Le 31/07/2007, à 15:14

SuperDuckWC

Re : Problème avec beryl !

Voilà mon XORG et j'ai installé les derniers pilotes propriétaires d'ATI

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier	"Default Layout"
  screen 0 "aticonfig-Screen[0]" 0 0
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
	Inputdevice	"Synaptics Touchpad"
EndSection

Section "Files"
	
	# path to defoma fonts
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"dri"
	Load		"extmod"
	Load		"freetype"
	Load		"int10"
	Load		"vbe"
	Load		"glx"
EndSection

Section "ServerFlags"
	Option		"AIGLX"	"off"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"	"/dev/psaux"
	Option		"Protocol"	"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
	Identifier	"stylus"
	Driver		"wacom"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier	"eraser"
	Driver		"wacom"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier	"cursor"
	Driver		"wacom"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
EndSection

Section "Monitor"
	Identifier	"aticonfig-Monitor[0]"
	Option		"VendorName"	"ATI Proprietary Driver"
	Option		"ModelName"	"Generic Autodetecting Monitor"
	Option		"DPMS"	"true"
EndSection

Section "Device"
	Identifier	"Generic Video Card"
	Driver		"fglrx"
	Busid		"PCI:1:0:0"
EndSection

Section "Device"
	Identifier	"aticonfig-Device[0]"
	Driver		"fglrx"
	Option		"VideoOverlay"	"on"
	Option		"OpenGLOverlay"	"off"
	BusID		"PCI:1:0:0"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Generic Video Card"
	Monitor		"Generic Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier	"aticonfig-Screen[0]"
	Device		"aticonfig-Device[0]"
	Monitor		"aticonfig-Monitor[0]"
	Defaultdepth	24
	SubSection "Display"
		Viewport	0	0
		Depth	24
	EndSubSection
EndSection

Section "DRI"
	Mode	0666
EndSection

Section "Extensions"
	Option		"Composite"	"disable"
EndSection

Hors ligne

#16 Le 31/07/2007, à 15:30

amkoolgarst

Re : Problème avec beryl !

salut,

A tous:

Avez-vous crée une session xgl?????

J'ai l'impression que non..............:rolleyes:

Donc un p'tit effort : direction la doc!!!!!:D

Dernière modification par amkoolgarst (Le 31/07/2007, à 15:31)

Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne

#17 Le 31/07/2007, à 15:56

SuperDuckWC

Re : Problème avec beryl !

oui et c'est dans cette session que j'ai l'erreur....

Hors ligne

#18 Le 31/07/2007, à 17:05

amkoolgarst

Re : Problème avec beryl !

@SuperDuckWC

Peut-être que fglrx ne se charge pas au démarrage...

tente ceci ( voir la doc)

echo "fglrx"|sudo tee -a /etc/modules

et redémarre le tout!
A+

Dernière modification par amkoolgarst (Le 31/07/2007, à 17:07)

Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne

#19 Le 31/07/2007, à 22:00

SuperDuckWC

Re : Problème avec beryl !

D'après 

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
fuse
lp
sbp2

Mon fglrx se charge dès l'ouverture de session..., cé ptetre du à un pb dans mon xorg

Hors ligne

#20 Le 31/07/2007, à 22:02

poupoul2

Re : Problème avec beryl !

Section "Device"
    Identifier    "Generic Video Card"
    Driver        "fglrx"
    Busid        "PCI:1:0:0"
EndSection

Section "Device"
    Identifier    "aticonfig-Device[0]"
    Driver        "fglrx"
    Option        "VideoOverlay"    "on"
    Option        "OpenGLOverlay"    "off"
    BusID        "PCI:1:0:0"
EndSection

Ca, c'est vraiment bizarre. 2 sections device. Essaie de modifier le fichier (après sauvegarde) pour n'en conserver qu'une

#21 Le 31/07/2007, à 22:06

amkoolgarst

Re : Problème avec beryl !

SuperDuckWC a écrit :

D'après 

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
fuse
lp
sbp2

Mon fglrx se charge dès l'ouverture de session..., cé ptetre du à un pb dans mon xorg

bon c'est pas ça...

T'as déjà tenté un 

sudo dpkg-reconfigure -phigh xserver-xorg

?

edit: commande corrigée...:rolleyes: toute mes excuses.

Dernière modification par amkoolgarst (Le 31/07/2007, à 22:14)

Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne

#22 Le 01/08/2007, à 13:47

SuperDuckWC

Re : Problème avec beryl !

@ poupoul , oui c'est bien bizarre aussi, mais le souci c'est que si j'en supprime un des deux bah ca plante lol

@amkoo, j'essai ça tout à l'heure!

Merci

Hors ligne

#23 Le 01/08/2007, à 14:45

amkoolgarst

Re : Problème avec beryl !

salut pourrais-tu donner ce log:

cat /var/log/Xorg.0.log

?

Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne

#24 Le 01/08/2007, à 16:36

poupoul2

Re : Problème avec beryl !

@ poupoul , oui c'est bien bizarre aussi, mais le souci c'est que si j'en supprime un des deux bah ca plante lol

Ca, ce n'est pas normal. Il faudrait déjà résoudre ce problème là.

Avant d'exécuter la commande proposée par amkoolgarst, n'oublie pas de faire une sauvegarde de ton xorg.conf

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.save

(par exemple)

Dernière modification par poupoul2 (Le 01/08/2007, à 16:36)

#25 Le 02/08/2007, à 01:22

SuperDuckWC

Re : Problème avec beryl !

@amkool:

drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
        compiled for 7.1.0, module version = 8.39.4
        ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SEC  Model: 0  Serial#: 0
(II) fglrx(0): Year: 2006  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 71.1 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(II) fglrx(0):  DD282154X3
(II) fglrx(0):  '@PZ����
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):  00ffffffffffff004ca3000000000000
(II) fglrx(0):  00100103802115780a87f594574f8c27
(II) fglrx(0):  27505400000001010101010101010101
(II) fglrx(0):  010101010101c71b00a0502017303020
(II) fglrx(0):  26004bcf100000190000000f00000000
(II) fglrx(0):  00000000002387026400000000fe0044
(II) fglrx(0):  443238320431353458330a20000000fe
(II) fglrx(0):  002740505a81b0d9ff01010a2020009d
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3.  5 power states available:
(II) fglrx(0):   1. 432/396MHz @ 60Hz [enable load balancing]
(II) fglrx(0):   2. 324/135MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(II) fglrx(0):   3. 209/135MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0):   4. 392/252MHz @ 60Hz [enable sleep, thermal diode mode]
(II) fglrx(0):   5. 392/252MHz @ 60Hz [enable sleep]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"   71.11  1280 1328 1360 1440  800 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "1280x720": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"   71.11  1280 1328 1360 1440  720 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   71.11  1024 1328 1360 1440  768 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   71.11  800 1328 1360 1440  600 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   71.11  720 1328 1360 1440  480 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   71.11  640 1328 1360 1440  480 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "640x432": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"   71.11  640 1328 1360 1440  432 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   71.11  640 1328 1360 1440  400 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   71.11  512 1328 1360 1440  384 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"   71.11  400 1328 1360 1440  300 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"   71.11  320 1328 1360 1440  240 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"   71.11  320 1328 1360 1440  200 802 808 823 +hsync +vsync
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (98, 96)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"   71.11  1280 1328 1360 1440  800 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "1280x720": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"   71.11  1280 1328 1360 1440  720 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   71.11  1024 1328 1360 1440  768 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   71.11  800 1328 1360 1440  600 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   71.11  720 1328 1360 1440  480 802 808 823 +hsync +vsync
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   71.11  640 1328 1360 1440  480 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "640x432": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"   71.11  640 1328 1360 1440  432 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   71.11  640 1328 1360 1440  400 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   71.11  512 1328 1360 1440  384 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"   71.11  400 1328 1360 1440  300 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"   71.11  320 1328 1360 1440  240 802 808 823 +hsync +vsync
(**) fglrx(0):  Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"   71.11  320 1328 1360 1440  200 802 808 823 +hsync +vsync
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.2.0
        ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(II) fglrx(0): [pcie] 126976 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0xdfdf0000 - 0xdfdfffff (0x10000) MX[b]
        [1] 0   0       0xc0000000 - 0xcfffffff (0x10000000) MX[b]
        [2] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [3] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [4] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [5] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [6] -1  0       0xdfcff000 - 0xdfcfffff (0x1000) MX[b]
        [7] -1  0       0xdf9fd700 - 0xdf9fd7ff (0x100) MX[b]
        [8] -1  0       0xdf9fd600 - 0xdf9fd6ff (0x100) MX[b]
        [9] -1  0       0xdf9fd500 - 0xdf9fd5ff (0x100) MX[b]
        [10] -1 0       0xdf9fd400 - 0xdf9fd4ff (0x100) MX[b]
        [11] -1 0       0xdf9fd800 - 0xdf9fdfff (0x800) MX[b]
        [12] -1 0       0xdf9fe000 - 0xdf9fffff (0x2000) MX[b]
        [13] -1 0       0xffa80000 - 0xffa803ff (0x400) MX[b]
        [14] -1 0       0xdfffc000 - 0xdfffffff (0x4000) MX[b]
        [15] -1 0       0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
        [16] -1 0       0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
        [17] 0  0       0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
        [18] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
        [19] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
        [20] 0  0       0x0000ee00 - 0x0000eeff (0x100) IX[b]
        [21] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [22] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [23] -1 0       0x000010c0 - 0x000010df (0x20) IX[b]
        [24] -1 0       0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
        [25] -1 0       0x00000374 - 0x00000374 (0x1) IX[b]
        [26] -1 0       0x00000170 - 0x00000177 (0x8) IX[b]
        [27] -1 0       0x000003f4 - 0x000003f4 (0x1) IX[b]
        [28] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[b]
        [29] -1 0       0x0000bf20 - 0x0000bf3f (0x20) IX[b]
        [30] -1 0       0x0000bf40 - 0x0000bf5f (0x20) IX[b]
        [31] -1 0       0x0000bf60 - 0x0000bf7f (0x20) IX[b]
        [32] -1 0       0x0000bf80 - 0x0000bf9f (0x20) IX[b]
        [33] -1 0       0x0000ee00 - 0x0000eeff (0x100) IX[b](B)
        [34] 0  0       0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
        [35] 0  0       0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7659000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.39.4
(II) fglrx(0):     Date: Jul 20 2007
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.20-16-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] texture shared area handle = 0x00008000
(II) fglrx(0): shared FSAAScale=4
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x005e9000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 410
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
        compiled for 7.1.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 16
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Solid Lines
        Dashed Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                30 128x128 slots
(II) fglrx(0): Acceleration enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/input/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(**) Option "HorizScrollDelta" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
        No such file or directory.
Error opening /dev/input/wacom : Invalid argument
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
        No such file or directory.
Error opening /dev/input/wacom : Invalid argument
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
        No such file or directory.
Error opening /dev/input/wacom : Invalid argument
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(--) Synaptics Touchpad touchpad found
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
ProcXCloseDevice to close or not ?
SetGrabKeysState - disabled
SetGrabKeysState - enabled

@poupoul ui tkt pas j'ai tjrs une sauvegarde de mon xorg, me suis fait avoir une fois lol

Hors ligne

Pages : 1 2