#1 Le 30/07/2007, à 09:31
- afra
probleme au démarrage sur acer aspire 7720 gemstone
je vais devoir me résigner a ne pas utiliser Ubuntu et rester sous Vista, suite a mon probleme non résolu.
rappel de mon probleme :
apres l'install, je me retrouve devant grub, quand je boot sur Ubuntu, j'ai droit a un kernel panic(kernel panic - not syncing:attempter to kill init! ), si j'edite le fichier ubuntu "sans rien changer", j'ai droit a un boot normal.
de temps en temps meme en éditant j'ai le kernel panic, et de temps en temps en temps en bootant directement sans éditer, ça démarre.
ormis ça Ubuntu marche, j'ai pu instalelr les drivers proprio de mon ati, le son fonctionne psa mais fait comme-ci la carte était installé, le lecteur DVD fontionne pas non plus, mais tout ça c'est secondaire si je boot pas je peux pas les régler.
rappel de ma config :
portable acer 7720 "gemstone"
core 2 duo 5250
2Go ram ddr2
radeon hd2300(xpress 1300 ou 1400 renommé en fait)
wifi intel 3945 abg (marche parfaitement)
DD 160 Go sata
graveur de DVDRam
carte son realtek
ecran 17" 1440x900
Dernière modification par afra (Le 31/07/2007, à 08:48)
Hors ligne
#2 Le 30/07/2007, à 09:38
- ebrain
Re : probleme au démarrage sur acer aspire 7720 gemstone
Et en passant les options noacpi nolacpi au boot ? 
@+
Le Blender Clan, site communautaire francophone Blender :: www.blenderclan.org ::
Hors ligne
#3 Le 30/07/2007, à 12:11
- afra
Re : probleme au démarrage sur acer aspire 7720 gemstone
j'ai cru au miracle, ça a fonctionné quand j'ai édité au démarrage, j'ai tout de suite édité le menu.lst pour le mettre d'office, ça a marcher au redémarrage, et puis ça marche plus 
Hors ligne
#4 Le 30/07/2007, à 12:57
- afra
Re : probleme au démarrage sur acer aspire 7720 gemstone
ça a l'air de marcher quand meme mieux, pour faire bonne mesure j'ai fait une recherche sur les options qu'on peut passer a grub, du coup j'ai rajouté ça :
title Ubuntu, kernel 2.6.20-15-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=e1a339a2-590f-4898-9efe-4a6d955ee03b ro noacpi nolacpi splash
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefaulttitle Ubuntu, kernel 2.6.20-15-generic noacpi
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=e1a339a2-590f-4898-9efe-4a6d955ee03b ro acpi=off noapic pci=noapic nolapic splash
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault
Hors ligne
#5 Le 30/07/2007, à 15:58
- ebrain
Re : probleme au démarrage sur acer aspire 7720 gemstone
ça a l'air de marcher quand meme mieux
Content que tu aies trouvé la solution .
@+
Le Blender Clan, site communautaire francophone Blender :: www.blenderclan.org ::
Hors ligne
#6 Le 30/07/2007, à 16:12
- lowbacca
Re : probleme au démarrage sur acer aspire 7720 gemstone
Bon OK c'est pt'et déja fait mais vu que t'en parle pas...........
as tu verifier tes barretes mémoires ????
par ce que marcher de temps en temps y'a que pour les clignotants que c'est normal....
Hors ligne
#7 Le 30/07/2007, à 19:00
- afra
Re : probleme au démarrage sur acer aspire 7720 gemstone
ben je vais faire un memtest, mais aprioris l'ordi etant neuf, je pense pas qu'il devrai y avoir de soucis.
sinon j'ai de nouveaux indices, j'ai démarrer avec ces options la :
acpi=off noapic pci=noapic nolapic splash
et comme par hazard j'ai du son, alros que quand je demarre avec juste :
noacpi nolacpi
j'en ai pas.
par contre quand je demarre avec toute les options j'ai pas de reseau et donc de connection internet, alors que de l'autre coté j'ai bien le reseau mais pas le son 
pas simple comme probleme 
Hors ligne
#8 Le 30/07/2007, à 19:24
- poupoul2
Re : probleme au démarrage sur acer aspire 7720 gemstone
ben je vais faire un memtest, mais aprioris l'ordi etant neuf, je pense pas qu'il devrai y avoir de soucis.
Même neuf, tu peux être confronté à un défaut sur une barrette. C'est sensible ces p'tites bêtes. Ca vaut le coup de faire le test, surtout s'il est neuf (donc sous garantie)
#9 Le 30/07/2007, à 20:13
- afra
Re : probleme au démarrage sur acer aspire 7720 gemstone
test effectué et pas de probleme memoire
j'ai fait plusieur test avec les options :
avec : noapic + nolapic - ça demarre, pas de son, reseau ok
avec : noapic + nolapic + acpi=off - ça demarre, son ok, pas de reseau
avec : noapic + nolapic + pci=noapic - ça demarre, pas de son, reseau ok
avec : noapic - ça demarre, pas de son, reseau ok
avec juste : acpi=off ou nolapic ou acpi=off+pci=noapic - ça demarre pas, ça plante sur wainting for root file system.
avec pci= noapic : j'ai un kernel panic.
voila pour les test, je pense donc qu'il y a un conflit quelque part, mais je susi franchement pas assez calé pour savoir ou.
deja que acpi et apic c'est du chinois, d'ailleur si quelqu'un a un lien pour que j'apprenne ce que c'est ça m'aiderais, au moins je serait un peu moins bete en me couchant ce soir
Hors ligne
#10 Le 30/07/2007, à 20:53
- afra
Re : probleme au démarrage sur acer aspire 7720 gemstone
ayant résolu le probleme de démarrage j'ai édité le nom du post pour indiquer résolu, et j'ai aussi changé celui-ci afin qu'il soit plus facilement trouvable par les personne ayant le meme probleme que moi.
pour mes autres problemes je passe dans le forum materiel etant donné qu'il ne sagit plus d'install.
merci a tous pour votre aide.
Hors ligne
#11 Le 30/07/2007, à 23:28
- ...
Re : probleme au démarrage sur acer aspire 7720 gemstone
Salut
1 heure pour un memtest... Tu n'as pas dû aller bien loin, il faut aller au minimum jusqu'à la passe 7 (à moins qu'il y ai des erreurs avant...).
Fait un test avec noapic nolapic pci=routeirq
Regarde ce que dit un dmesg, c'est souvent instructif. 
Bonne continuation
#12 Le 30/07/2007, à 23:54
- afra
Re : probleme au démarrage sur acer aspire 7720 gemstone
ok pour le memtest, mais je ferait ça une autre fois c'est mega long.
j'ai essayé tes options, ça demarre, j'ai bien le reseau mais toujours pas le son
je met mon dmesg, moi j'y comprend pas grand chose
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000007fbfe000 end: 000000007fcfe000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fcfe000 size: 000000000000b000 end: 000000007fd09000 type: 2
[ 0.000000] copy_e820_map() start: 000000007fd09000 size: 0000000000049000 end: 000000007fd52000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fd52000 size: 0000000000003000 end: 000000007fd55000 type: 2
[ 0.000000] copy_e820_map() start: 000000007fd55000 size: 0000000000066000 end: 000000007fdbb000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fdbb000 size: 0000000000004000 end: 000000007fdbf000 type: 2
[ 0.000000] copy_e820_map() start: 000000007fdbf000 size: 00000000000b9000 end: 000000007fe78000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fe78000 size: 0000000000047000 end: 000000007febf000 type: 4
[ 0.000000] copy_e820_map() start: 000000007febf000 size: 0000000000041000 end: 000000007ff00000 type: 3
[ 0.000000] copy_e820_map() start: 000000007ff00000 size: 0000000000100000 end: 0000000080000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000004000 end: 00000000fed20000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fcfe000 (usable)
[ 0.000000] BIOS-e820: 000000007fcfe000 - 000000007fd09000 (reserved)
[ 0.000000] BIOS-e820: 000000007fd09000 - 000000007fd52000 (usable)
[ 0.000000] BIOS-e820: 000000007fd52000 - 000000007fd55000 (reserved)
[ 0.000000] BIOS-e820: 000000007fd55000 - 000000007fdbb000 (usable)
[ 0.000000] BIOS-e820: 000000007fdbb000 - 000000007fdbf000 (reserved)
[ 0.000000] BIOS-e820: 000000007fdbf000 - 000000007fe78000 (usable)
[ 0.000000] BIOS-e820: 000000007fe78000 - 000000007febf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007febf000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe1b0
[ 0.000000] Entering add_active_range(0, 0, 523896) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523896
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523896
[ 0.000000] On node 0 totalpages: 523896
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2300 pages used for memmap
[ 0.000000] HighMem zone: 292220 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 ACRSYS ) @ 0x000fe020
[ 0.000000] ACPI: RSDT (v001 ACRSYS ACRPRDCT 0x00000001 0x01000013) @ 0x7fefe038
[ 0.000000] ACPI: FADT (v001 ACRSYS ACRPRDCT 0x00000001 MSFT 0x01000013) @ 0x7fefd000
[ 0.000000] ACPI: MADT (v001 ACRSYS ACRPRDCT 0x00000001 MSFT 0x01000013) @ 0x7fef4000
[ 0.000000] ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x00000001 MSFT 0x01000013) @ 0x7fef3000
[ 0.000000] ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x00000001 MSFT 0x01000013) @ 0x7fef2000
[ 0.000000] ACPI: HPET (v001 ACRSYS ACRPRDCT 0x00000001 MSFT 0x01000013) @ 0x7fef1000
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20051117) @ 0x7fef0000
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20051117) @ 0x7feef000
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20051117) @ 0x7feee000
[ 0.000000] ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00000001 MSFT 0x01000013) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: INSYDE Product ID: Napa CRB APIC at: 0xFEE00000
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] I/O APIC #32 Version 32 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Detected 1496.295 MHz processor.
[ 24.144603] Built 1 zonelists. Total pages: 519804
[ 24.144607] Kernel command line: root=UUID=e1a339a2-590f-4898-9efe-4a6d955ee03b ro noapic nolapic pci=routeirq splash
[ 24.144790] mapped APIC to ffffd000 (fee00000)
[ 24.144793] mapped IOAPIC to ffffc000 (fec00000)
[ 24.144796] Enabling fast FPU save and restore... done.
[ 24.144798] Enabling unmasked SIMD FPU exception support... done.
[ 24.144806] Initializing CPU#0
[ 24.144887] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 24.147256] Console: colour VGA+ 80x25
[ 24.157585] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 24.158038] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 24.241665] Memory: 2066660k/2095584k available (1992k kernel code, 27684k reserved, 893k data, 328k init, 1178008k highmem)
[ 24.241822] virtual kernel memory layout:
[ 24.241823] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 24.241824] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.241826] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 24.241827] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 24.241828] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 24.241829] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 24.241831] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 24.242896] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.243344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 24.243969] hpet0: 3 64-bit timers, 14318180 Hz
[ 24.245108] Using HPET for base-timer
[ 24.323306] Calibrating delay using timer specific routine.. 2997.78 BogoMIPS (lpj=5995563)
[ 24.323614] Security Framework v1.0.0 initialized
[ 24.323753] SELinux: Disabled at boot.
[ 24.323900] Mount-cache hash table entries: 512
[ 24.324174] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
[ 24.324182] monitor/mwait feature present.
[ 24.324318] using mwait in idle threads.
[ 24.324454] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.324710] CPU: L2 cache: 2048K
[ 24.324844] CPU: Physical Processor ID: 0
[ 24.324976] CPU: Processor Core ID: 0
[ 24.325110] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
[ 24.325121] Compat vDSO mapped to ffffe000.
[ 24.325257] Remapping vsyscall page to ffffe000
[ 24.325402] Checking 'hlt' instruction... OK.
[ 24.339529] SMP alternatives: switching to UP code
[ 24.339852] Freeing SMP alternatives: 11k freed
[ 24.340165] Early unpacking initramfs... done
[ 24.697838] ACPI: Core revision 20060707
[ 24.698649] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 24.702973] ACPI: setting ELCR to 0200 (from 0c00)
[ 24.790498] CPU0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d
[ 24.790903] Total of 1 processors activated (2997.78 BogoMIPS).
[ 24.899017] Brought up 1 CPUs
[ 24.899357] Booting paravirtualized kernel on bare hardware
[ 24.899587] Time: 23:49:19 Date: 06/30/107
[ 24.899741] NET: Registered protocol family 16
[ 24.899942] EISA bus registered
[ 24.900077] ACPI: bus type pci registered
[ 24.901158] PCI: Using configuration type 1
[ 24.901291] Setting up standard PCI resources
[ 24.910062] ACPI: Interpreter enabled
[ 24.910196] ACPI: Using PIC for interrupt routing
[ 24.910652] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.910790] PCI: Probing PCI hardware (bus 00)
[ 24.914148] Boot video device is 0000:01:00.0
[ 24.916517] PCI: Transparent bridge - 0000:00:1e.0
[ 24.916887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.925855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 24.926422] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 24.928128] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 24.929820] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 24.931533] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 24.933230] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 24.935187] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 24.936877] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 24.938566] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 24.948889] ACPI: Cannot map memory that high
[ 24.949024] ACPI Error (exregion-0165): Could not map memory at 00000001000001AB, size 1000 [20060707]
[ 24.949417] ACPI Exception (evregion-0424): AE_BAD_PARAMETER, Returned by Handler for [SystemMemory] [20060707]
[ 24.949808] ACPI Exception (dswexec-0458): AE_BAD_PARAMETER, While resolving operands for [OpcodeName unavailable] [20060707]
[ 24.950203] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._REG] (Node df823c34), AE_BAD_PARAMETER
[ 26.999479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 26.999817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 27.000156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 27.000884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 27.002899] ACPI: Power Resource [FN00] (on)
[ 27.003132] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.003274] pnp: PnP ACPI init
[ 27.505515] ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
[ 27.505665] ACPI: EC: input buffer is not empty, aborting transaction
[ 27.505668] ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
[ 27.506061] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.BAT0._STA] (Node df824608), AE_TIME
[ 27.506621] ACPI Error (uteval-0212): Method execution failed [\_SB_.PCI0.LPC_.BAT0._STA] (Node df824608), AE_TIME
[ 27.507515] pnp: PnP ACPI: found 10 devices
[ 27.507651] PnPBIOS: Disabled by ACPI PNP
[ 27.507821] PCI: Using ACPI for IRQ routing
[ 27.507956] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 27.508377] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 27.508514] PCI: setting IRQ 11 as level-triggered
[ 27.508521] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.508912] ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.509582] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[ 27.509719] PCI: setting IRQ 10 as level-triggered
[ 27.509726] ACPI: PCI Interrupt 0000:00:1a.1[b] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
[ 27.510379] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 27.510515] ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 27.511167] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 27.511303] ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 27.511693] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.512345] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 27.512481] ACPI: PCI Interrupt 0000:00:1c.1[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 27.512871] ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 27.514251] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 27.514387] ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 27.515039] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 27.515175] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 27.515564] ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 27.515957] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 27.516347] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 27.516737] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 27.517127] ACPI: PCI Interrupt 0000:00:1f.2[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 27.517518] ACPI: PCI Interrupt 0000:00:1f.3[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 27.517921] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.518311] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 27.518700] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 27.519353] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 27.519490] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 27.519879] ACPI: PCI Interrupt 0000:07:00.1[b] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 27.520269] ACPI: PCI Interrupt 0000:07:00.2[b] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 27.520658] ACPI: PCI Interrupt 0000:07:00.3[b] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 27.521048] ACPI: PCI Interrupt 0000:07:00.4[b] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 27.521740] NET: Registered protocol family 8
[ 27.521863] NET: Registered protocol family 20
[ 27.522081] pnp: 00:01: ioport range 0x164e-0x164f has been reserved
[ 27.522497] PCI: Bridge: 0000:00:01.0
[ 27.522632] IO window: 5000-5fff
[ 27.522767] MEM window: 98300000-983fffff
[ 27.522903] PREFETCH window: 80000000-8fffffff
[ 27.523039] PCI: Bridge: 0000:00:1c.0
[ 27.523176] IO window: 4000-4fff
[ 27.523320] MEM window: 97300000-982fffff
[ 27.523461] PREFETCH window: 90000000-90ffffff
[ 27.523607] PCI: Bridge: 0000:00:1c.1
[ 27.523743] IO window: 3000-3fff
[ 27.523885] MEM window: 96300000-972fffff
[ 27.524026] PREFETCH window: 91000000-91ffffff
[ 27.524171] PCI: Bridge: 0000:00:1c.2
[ 27.524308] IO window: 2000-2fff
[ 27.524452] MEM window: 95200000-962fffff
[ 27.524593] PREFETCH window: 92000000-92ffffff
[ 27.524739] PCI: Bridge: 0000:00:1c.3
[ 27.524876] IO window: 1000-1fff
[ 27.525020] MEM window: 94100000-951fffff
[ 27.525161] PREFETCH window: 93000000-93ffffff
[ 27.525307] PCI: Bridge: 0000:00:1e.0
[ 27.525439] IO window: disabled.
[ 27.525598] MEM window: 94000000-940fffff
[ 27.525739] PREFETCH window: disabled.
[ 27.525893] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.526285] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 27.526338] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.526735] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 27.526791] ACPI: PCI Interrupt 0000:00:1c.1[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 27.527188] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 27.527244] ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 27.527640] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 27.527696] ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 27.528095] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 27.528128] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 27.528148] NET: Registered protocol family 2
[ 27.561536] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 27.561768] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 27.562382] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 27.562759] TCP: Hash tables configured (established 131072 bind 65536)
[ 27.562895] TCP reno registered
[ 27.573595] checking if image is initramfs... it is
[ 28.268360] Freeing initrd memory: 6786k freed
[ 28.269116] audit: initializing netlink socket (disabled)
[ 28.269278] audit(1185839362.028:1): initialized
[ 28.269479] highmem bounce pool size: 64 pages
[ 28.269659] VFS: Disk quotas dquot_6.5.1
[ 28.269805] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 28.269980] io scheduler noop registered
[ 28.270236] io scheduler anticipatory registered
[ 28.270491] io scheduler deadline registered
[ 28.270751] io scheduler cfq registered (default)
[ 28.271659] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.271701] assign_interrupt_mode Found MSI capability
[ 28.271837] Allocate Port Service[0000:00:01.0:pcie00]
[ 28.271868] Allocate Port Service[0000:00:01.0:pcie02]
[ 28.271976] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 28.272123] assign_interrupt_mode Found MSI capability
[ 28.272258] Allocate Port Service[0000:00:1c.0:pcie00]
[ 28.272288] Allocate Port Service[0000:00:1c.0:pcie02]
[ 28.272544] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 28.272688] assign_interrupt_mode Found MSI capability
[ 28.272824] Allocate Port Service[0000:00:1c.1:pcie00]
[ 28.272853] Allocate Port Service[0000:00:1c.1:pcie02]
[ 28.273115] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 28.273273] assign_interrupt_mode Found MSI capability
[ 28.273408] Allocate Port Service[0000:00:1c.2:pcie00]
[ 28.273437] Allocate Port Service[0000:00:1c.2:pcie02]
[ 28.273697] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 28.273844] assign_interrupt_mode Found MSI capability
[ 28.273980] Allocate Port Service[0000:00:1c.3:pcie00]
[ 28.274010] Allocate Port Service[0000:00:1c.3:pcie02]
[ 28.274299] isapnp: Scanning for PnP cards...
[ 28.632730] isapnp: No Plug & Play device found
[ 28.652119] Real Time Clock Driver v1.12ac
[ 28.652464] hpet_resources: 0xfed00000 is busy
[ 28.652493] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 28.653343] mice: PS/2 mouse device common for all mice
[ 28.653955] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 28.654292] input: Macintosh mouse button emulation as /class/input/input0
[ 28.654458] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 28.654595] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 28.655063] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 28.690395] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.690532] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 28.692851] EISA: Probing bus 0 at eisa.0
[ 28.693008] Cannot allocate resource for EISA slot 1
[ 28.693142] Cannot allocate resource for EISA slot 2
[ 28.693277] Cannot allocate resource for EISA slot 3
[ 28.693413] Cannot allocate resource for EISA slot 4
[ 28.693548] Cannot allocate resource for EISA slot 5
[ 28.693683] Cannot allocate resource for EISA slot 6
[ 28.693830] EISA: Detected 0 cards.
[ 28.724040] TCP cubic registered
[ 28.724177] NET: Registered protocol family 1
[ 28.724328] Using IPI No-Shortcut mode
[ 28.724500] ACPI: (supports S0 S3<6>Time: tsc clocksource has been installed.
[ 28.725034] S4 S5)
[ 28.725443] Magic number: 15:489:859
[ 28.725627] hash matches device ptyse
[ 28.725933] Freeing unused kernel memory: 328k freed
[ 28.747458] input: AT Translated Set 2 keyboard as /class/input/input1
[ 29.946810] Capability LSM initialized
[ 30.058706] ACPI: Transitioning device [FAN] to D0
[ 30.058710] ACPI: Transitioning device [FAN] to D0
[ 30.058713] ACPI: Fan [FAN] (off)
[ 30.062670] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 30.062931] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 30.063436] Monitor-Mwait will be used to enter C-1 state
[ 30.063439] Monitor-Mwait will be used to enter C-2 state
[ 30.063442] Monitor-Mwait will be used to enter C-3 state
[ 30.063445] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 30.063451] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 30.063458] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 5.684000] Time: hpet clocksource has been installed.
[ 6.136000] ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
[ 6.136000] ACPI: EC: input buffer is not empty, aborting transaction
[ 6.136000] ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
[ 6.136000] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands for [OpcodeName unavailable] [20060707]
[ 6.136000] ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node df8207ac), AE_TIME
[ 6.676000] usbcore: registered new interface driver usbfs
[ 6.676000] usbcore: registered new interface driver hub
[ 6.676000] usbcore: registered new device driver usb
[ 6.676000] USB Universal Host Controller Interface driver v3.0
[ 6.676000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 6.676000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 6.676000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 6.676000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.676000] uhci_hcd 0000:00:1a.0: irq 11, io base 0x000060c0
[ 6.676000] usb usb1: configuration #1 chosen from 1 choice
[ 6.676000] hub 1-0:1.0: USB hub found
[ 6.676000] hub 1-0:1.0: 2 ports detected
[ 6.780000] ACPI: PCI Interrupt 0000:00:1a.1[b] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
[ 6.780000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 6.780000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 6.780000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 6.780000] uhci_hcd 0000:00:1a.1: irq 10, io base 0x000060a0
[ 6.780000] usb usb2: configuration #1 chosen from 1 choice
[ 6.780000] hub 2-0:1.0: USB hub found
[ 6.780000] hub 2-0:1.0: 2 ports detected
[ 6.828000] SCSI subsystem initialized
[ 6.832000] libata version 2.20 loaded.
[ 6.844000] ieee1394: Initialized config rom entry `ip1394'
[ 6.884000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 6.884000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 6.884000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.884000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 6.884000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00006080
[ 6.884000] usb usb3: configuration #1 chosen from 1 choice
[ 6.884000] hub 3-0:1.0: USB hub found
[ 6.884000] hub 3-0:1.0: 2 ports detected
[ 6.988000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 6.988000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 6.988000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.988000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 6.988000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00006060
[ 6.988000] usb usb4: configuration #1 chosen from 1 choice
[ 6.988000] hub 4-0:1.0: USB hub found
[ 6.988000] hub 4-0:1.0: 2 ports detected
[ 7.092000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7.092000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 7.092000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.092000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 7.092000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00006040
[ 7.092000] usb usb5: configuration #1 chosen from 1 choice
[ 7.092000] hub 5-0:1.0: USB hub found
[ 7.092000] hub 5-0:1.0: 2 ports detected
[ 7.196000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7.196000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 7.196000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 7.196000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 7.196000] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.196000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 7.196000] ehci_hcd 0000:00:1a.7: irq 11, io mem 0x98404c00
[ 7.200000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 7.200000] usb usb6: configuration #1 chosen from 1 choice
[ 7.200000] hub 6-0:1.0: USB hub found
[ 7.200000] hub 6-0:1.0: 4 ports detected
[ 7.304000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 7.304000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 7.304000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.304000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 7.304000] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.304000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 7.304000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x98404800
[ 7.308000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 7.308000] usb usb7: configuration #1 chosen from 1 choice
[ 7.308000] hub 7-0:1.0: USB hub found
[ 7.308000] hub 7-0:1.0: 6 ports detected
[ 7.332000] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 7.412000] tg3.c:v3.72 (January 8, 2007)
[ 7.412000] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7.412000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 7.456000] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:e2:d6:96
[ 7.456000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 7.456000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 7.456000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 7.456000] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 7.508000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[94000000-940007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 7.512000] ahci 0000:00:1f.2: version 2.1
[ 7.512000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 7.940000] usb 6-1: new high speed USB device using ehci_hcd and address 2
[ 8.516000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x3) don't match
[ 8.516000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.516000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
[ 8.516000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 8.516000] ata1: SATA max UDMA/133 cmd 0xf8858100 ctl 0x00000000 bmdma 0x00000000 irq 11
[ 8.516000] ata2: SATA max UDMA/133 cmd 0xf8858180 ctl 0x00000000 bmdma 0x00000000 irq 11
[ 8.516000] scsi0 : ahci
[ 8.596000] usb 6-1: configuration #1 chosen from 1 choice
[ 8.784000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[b640cf2600023f76]
[ 8.840000] usb 7-4: new high speed USB device using ehci_hcd and address 2
[ 8.980000] usb 7-4: configuration #1 chosen from 1 choice
[ 9.000000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.000000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 9.000000] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 9.000000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 9.000000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 9.000000] ata1.00: configured for UDMA/100
[ 9.000000] scsi1 : ahci
[ 9.164000] usbcore: registered new interface driver libusual
[ 9.164000] Initializing USB Mass Storage driver...
[ 9.312000] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.312000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 9.320000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 9.320000] sda: Write Protect is off
[ 9.320000] sda: Mode Sense: 00 3a 00 00
[ 9.320000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.320000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 9.320000] sda: Write Protect is off
[ 9.320000] sda: Mode Sense: 00 3a 00 00
[ 9.320000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.320000] sda:<6>usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 9.576000] usb 5-1: configuration #1 chosen from 1 choice
[ 9.580000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 9.580000] usb-storage: device found at 2
[ 9.580000] usb-storage: waiting for device to settle before scanning
[ 9.580000] usbcore: registered new interface driver usb-storage
[ 9.580000] USB Mass Storage support registered.
[ 9.592000] usbcore: registered new interface driver hiddev
[ 9.604000] input: Logitech USB Optical Mouse as /class/input/input2
[ 9.604000] input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1
[ 9.604000] usbcore: registered new interface driver usbhid
[ 9.604000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 9.728000] sda1 sda2 sda3 sda4 < sda5 >
[ 9.760000] sd 0:0:0:0: Attached scsi disk sda
[ 9.764000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.032000] Attempting manual resume
[ 10.032000] swsusp: Resume From Partition 8:3
[ 10.032000] PM: Checking swsusp image.
[ 10.032000] PM: Resume from disk failed.
[ 10.076000] kjournald starting. Commit interval 5 seconds
[ 10.076000] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.580000] usb-storage: device scan complete
[ 14.584000] scsi 2:0:0:0: Direct-Access ST380011 A PQ: 0 ANSI: 2
[ 14.584000] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
[ 14.588000] sdb: Write Protect is off
[ 14.588000] sdb: Mode Sense: 38 00 00 00
[ 14.588000] sdb: assuming drive cache: write through
[ 14.588000] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
[ 14.592000] sdb: Write Protect is off
[ 14.592000] sdb: Mode Sense: 38 00 00 00
[ 14.592000] sdb: assuming drive cache: write through
[ 14.592000] sdb: sdb1
[ 14.592000] sd 2:0:0:0: Attached scsi disk sdb
[ 14.592000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 20.488000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 20.500000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.876000] sdhci: Secure Digital Host Controller Interface driver
[ 20.876000] sdhci: Copyright(c) Pierre Ossman
[ 20.876000] sdhci: SDHCI controller found at 0000:07:00.1 [1180:0822] (rev 22)
[ 20.876000] ACPI: PCI Interrupt 0000:07:00.1[b] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 20.876000] PCI: Setting latency timer of device 0000:07:00.1 to 64
[ 20.876000] mmc0: SDHCI at 0x94000b00 irq 11 DMA
[ 21.820000] Linux video capture interface: v2.00
[ 21.824000] ieee80211_crypt: registered algorithm 'NULL'
[ 21.848000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 21.848000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 21.960000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[ 21.960000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 22.008000] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
[ 22.008000] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 22.008000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 22.008000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 22.012000] usbcore: registered new interface driver uvcvideo
[ 22.012000] USB Video Class driver (v0.1.0)
[ 22.092000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 22.092000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 22.732000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04713/0x204000
[ 22.828000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 23.300000] lp: driver loaded but no devices found
[ 23.384000] Adding 1951888k swap on /dev/disk/by-uuid/d5d09834-cdbb-44e9-a5eb-22da642d2833. Priority:-1 extents:1 across:1951888k
[ 23.588000] EXT3 FS on sda1, internal journal
[ 23.856000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 24.288000] ieee80211_crypt: registered algorithm 'WEP'
[ 26.464000] NET: Registered protocol family 17
[ 29.712000] NET: Registered protocol family 10
[ 29.712000] lo: Disabled Privacy Extensions
[ 38.868000] spurious 8259A interrupt: IRQ7.
[ 39.816000] eth1: no IPv6 routers present
[ 58.948000] kjournald starting. Commit interval 5 seconds
[ 58.948000] EXT3 FS on sda5, internal journal
[ 58.948000] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.008000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 59.096000] NTFS volume version 3.1.Dernière modification par afra (Le 31/07/2007, à 00:00)
Hors ligne
#13 Le 31/07/2007, à 02:56
- ...
Re : probleme au démarrage sur acer aspire 7720 gemstone
Il y a pas mal d'erreurs, et pas de trace d'un chipset pour le son
Tu trouveras sur cette page quelques options à essayer, en particulier noapic + pci=noacpi pci=bios pci=nobios pnpbios=off (une seule à la fois pour commencer et ne mélange pas les options pci=*).
Sur cette autre page tu trouveras l'ensemble des options utilisables pour le noyau 2.6.20 (Feisty).
Ça fait beaucoup d'options et encore plus de combinaisons, de plus il faut regarder le dmesg à chaque fois, il donne des indications importantes et parfois une option à essayer.
Bon courage
PS tu peux enlever le [résolu] du titre, des gens compétents peuvent toujours te donner d'autres conseils.
#14 Le 31/07/2007, à 13:41
- afra
Re : probleme au démarrage sur acer aspire 7720 gemstone
j'ai installé lshw-gtk, fait un petit :
lshw -html > ma_config.htmlet optenu toute les info sur mon matos, etonnemment toute le matos est en IRQ11, c'est normal ????
Hors ligne
#15 Le 02/08/2007, à 09:29
- afra
Re : probleme au démarrage sur acer aspire 7720 gemstone
bon ben si personne n'a de solution a mon probleme, je vais etre dans l'obligation de rester sous vista et ses 700Mo de ram utilisé au démarrage(contre 130 pour ubuntu).
pas d'autre solution si je peux pas avoir de son
Hors ligne