[Résolus] Partage de dossier avec Windows

lilp · Le 16/09/2013, à 14:15

Bonjour,
J'avais déjà fait un sujet à ce propos qui avais été résolus, mais depuis, j'ai du changé de disque (un est hélas décédé).
Et apparemment la méthode utilisé n'était pas top, c'est pourquoi je me permet d'en rouvrir un.

J'ai un Serveur sous Xubuntu, et un pc sous Windows.
J'aimerais que depuis mon poste sous Windows (et n'importe quel poste connecté à mon réseau local), avoir accès à certains dossiers (downloads, films, et séries).
Pour le moment j'ai accès au dossier "Download", je peut naviguer et copier des fichiers dedans, mais je ne peut pas en supprimer, il se trouve dans "/home/lilphoenix/Downloads"
Je voit deux dossiers "Series", mais je ne peut ni les ouvrir et par conséquent je ne peut pas copier, ou supprimer dedans depuis le réseau. Le dossier "Series" ce situe sur un disque à part de l'OS, et ce trouve dans "/media/lilphoenix/Series/series".

Je n'arrives pas à partager en lecture écriture ces différents dossiers, si quelqu'un à une idée.... d'avance merci.

Dernière modification par lilp (Le 13/03/2015, à 15:24)

richardgilbert · Le 16/09/2013, à 18:48

Sur la partie Samba de la documentation , tu auras plus d'aide mais un outil assez intéressant est samba-config aussi sur la documentation de samba.

lilp · Le 17/09/2013, à 10:37

Je te remercie de ta réponse. J'ai bien installer Samba, et configurer mon fichier smb.conf. Avec à la fin :

[Downloads]
path = /home/lilphoenix/Downloads
available = yes
browseable = yes
public = yes
writable = yes
force user = lilphoenix

[Downloads]
path = /media/lilphoenix/Series/Serie
available = yes
browseable = yes
public = yes
writable = yes
force user = lilphoenix

Maintenant j'ai accès en écriture au dossier "Serie", mais "Downloads" me demande un id et mdp, j'ai essayer celui du serveur et celui du poste Windows mais il me refuse.
Comment éviter cette demande d'identification? Et permettre de se connecte de manière anonyme?

richardgilbert · Le 17/09/2013, à 11:01

Fait sur le terminal du serveur:

sudo smbpasswd -a lilphoenix

et rentres le mot de passe.

lilp · Le 17/09/2013, à 12:02

Je viens de le faire, mais aucun changement.
Sur le poste Windows, il me dit "domaine:" ac pour nom le nom de mon poste Windows. J'ai essayer en mettant "Serveur\lilphoenix" et le nouveau mdp, mais aucun changment.

richardgilbert · Le 17/09/2013, à 14:48

Le mot de passe doit être le même sur samba que sur ton serveur.

lilp · Le 17/09/2013, à 14:56

J'ai mit le mm pour l'utilisateur Samba que mon utilisateur Serveur. Par contre, mon compte utilisateur sur Windows le mdp est différent.

richardgilbert · Le 17/09/2013, à 15:16

Il ne te demande pas l'utilisateur et mot de passe sur win?

lilp · Le 17/09/2013, à 15:35

Depuis Windows quand je veut avoir accès au dossier partager, il me demande un id et mdp. Les id sur le serveur, samba et windows sont le même, mais le mdp de windows est différent de celui du serveur

richardgilbert · Le 17/09/2013, à 15:56

Alors quand il te demande, tu rentres ceux du serveur.

lilp · Le 17/09/2013, à 16:26

Nickel, cela fonctionne.
Mais y a t'il moyen d'outre passer cette demande de mdp? De n'avoir pas besoin de renseigner de mdp? Genre autoriser tout le monde? Ou compte invité?

pem1664 · Le 17/09/2013, à 16:46

hello si en utilisant

security = SHARE

dans ton smb.conf

lilp · Le 17/09/2013, à 17:00

Et en enlevais le

force user = lilphoenix

?

pem1664 · Le 17/09/2013, à 17:04

oui normalement ca permet de ne plus avoir d'authentification

lilp · Le 19/09/2013, à 09:29

Désole de ma réponse tardive.
Je viens de rajouter le paramètre

security = share

et j'ai commenter le

force user

J'ai fait un

sudo service smbd stop
sudo service smbd start

Je retente la connexion et il me demande encore l'id et mdp.
Peut-être un certain temps avant qu la modification soit prise en compte?

lilp · Le 30/09/2013, à 15:44

Cela fait plusieurs jours maintenant, et j'ai toujours la demande de mot de passe et d'identifiant.
Et certains jour j'ai accès au dossiers "Séries" et "Films" et d'autres non.
je ne comprend pas vraiment pas pkr.

lilp · Le 07/10/2013, à 14:31

N'ayant plus vraiment accès à mes dossiers, j'ai cru bon de supprimer entièrement Samba, pour mieux le réinstaller (je pensais).
Mais Après avoir configurer mon "smb.conf" pour avoir accès dans un 1er temps au dossier "Downloads", je ne voit hélas plus mon Serveur dans le partage de Windows.

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)
   netbios name = Serveur
   browseable = yes
   security = share

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each 
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

  realm = localdomain
  server role = domain controller
[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[sysvol]
  path = /var/lib/samba/sysvol
  read only = no

[netlogon]
  path = /var/lib/samba/sysvol/localdomain/scripts
  read only = no

[Downloads]
path = /home/lilphoenix/Downloads
guest ok = yes
browseable = yes
public = yes
security = share
writeable = yes
lilphoenix@Serveur:~$

lilp · Le 21/10/2013, à 16:11

J'ai de nouveau supprime et réinstaller Samba. Mais je n'ai toujours pas accès aux réseau local a part la Freebox.
Je ne voit pas mon poste Windows depuis le Serveur (Ubuntu) et je ne voit pas le serveur depuis le poste Windows.

Je suis partie sur un installation propre, et édition directement du smb.conf comme dans l'exemple :

[Home]

        path= /home/lilphoenix

        abailable= yes

        browseable= yes

        public= yes

        security= share

        writeable= yes

        force user= lilphoenix

Dernière modification par lilp (Le 13/03/2015, à 15:26)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 16/09/2013, à 14:15

[Résolus] Partage de dossier avec Windows

#2 Le 16/09/2013, à 18:48

Re : [Résolus] Partage de dossier avec Windows

#3 Le 17/09/2013, à 10:37

Re : [Résolus] Partage de dossier avec Windows

#4 Le 17/09/2013, à 11:01

Re : [Résolus] Partage de dossier avec Windows

#5 Le 17/09/2013, à 12:02

Re : [Résolus] Partage de dossier avec Windows

#6 Le 17/09/2013, à 14:48

Re : [Résolus] Partage de dossier avec Windows

#7 Le 17/09/2013, à 14:56

Re : [Résolus] Partage de dossier avec Windows

#8 Le 17/09/2013, à 15:16

Re : [Résolus] Partage de dossier avec Windows

#9 Le 17/09/2013, à 15:35

Re : [Résolus] Partage de dossier avec Windows

#10 Le 17/09/2013, à 15:56

Re : [Résolus] Partage de dossier avec Windows

#11 Le 17/09/2013, à 16:26

Re : [Résolus] Partage de dossier avec Windows

#12 Le 17/09/2013, à 16:46

Re : [Résolus] Partage de dossier avec Windows

#13 Le 17/09/2013, à 17:00

Re : [Résolus] Partage de dossier avec Windows

#14 Le 17/09/2013, à 17:04

Re : [Résolus] Partage de dossier avec Windows

#15 Le 19/09/2013, à 09:29

Re : [Résolus] Partage de dossier avec Windows

#16 Le 30/09/2013, à 15:44

Re : [Résolus] Partage de dossier avec Windows

#17 Le 07/10/2013, à 14:31

Re : [Résolus] Partage de dossier avec Windows

#18 Le 21/10/2013, à 16:11

Re : [Résolus] Partage de dossier avec Windows

Pied de page des forums