#1 Le 10/10/2013, à 11:01
- morane
win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Bon, j'ai déjà fait pas mal d'installation Ubuntu, mais cette fois-ci, c'est ma première en win8 / uefi et je galère
J'ai suivi ce tuto:
http://doc.ubuntu-fr.org/uefi
j'ai désactivé le quickboot et le secureboot
J'ai réduit la partition Win8 pour faire de la place (sous win8)
J'ai redémarré le PC avec le livecd Ubuntu 12.04.3 puis avec Gparted j'aicréé sur l'espace libre:
- une partition ext3 pour le système
- une partition ext3 pour le home
- une partition swap
- une partition ntfs pour les donnees
J'ai redémarré le PC sur win8 et pas de problème, il détecte les partitions et peut aller sur la "donnees"
Je redémarre sur Ubuntu 12.04.3, je choisi l'installation manuelle et j'ai:
/dev/sda1 ntfs windows RE tools
/dev/sda2 fat32 system
/dev/sda3 unknown
/dev/sda4 ntfs windows
/dev/sda5 ntfs Recovery image
/dev/sda6 ext3 ubuntu
/dev/sda7 ext3 home
/dev/sda8 linux swap
/dev/sda9 ntfs donnees
je modifie les partitions suivantes de cette manière:
/dev/sda4 ntfs windows montage /mnt/windows
/dev/sda6 ext3 ubuntu formatage et montage /
/dev/sda7 ext3 home montage/home
/dev/sda9 ntfs donnees montage /media/donnees
je laisse tel quel l'option de l'installation d'amorçage sur sda
tout se passe comme prévu et à la fin Ubuntu me demande de redémarrer.
J'arrive sur l'écran violet avec le menu de grub habituel, et au bout de quelques secondes l'écran reste violet et vide au lieu de lancer Ubuntu.
Si je redémarre et que je choisi de démarrer windows alors on m'indique qu'il y a des erreurs UEFI et je reste planté.
Je redémarre avec le live Ubuntu, je lance Ubuntu boot repair, je suis les indications en mode avancé, je redémarre et j'obtiens comme menu:
Ubuntu linux 3.8.0-31-generic
Ubuntu linux 3.8.0-31-generic (recovery)
Previous linux versions
Windows UEFI bkpbootmgfw.efi
Windows Boot UEFI loader
EFI/HP/Biosupdate/cryptRSA32.efi
EFI/HP/Biosupdate/cryptRSA.efi
EFI/HP/Biosupdate/Hpbiosupdate32.efi
EFI/HP/Biosupdate/Hpbiosupdate.efi
EFI/HP/SystemDiags/cryptRSA32.efi
EFI/HP/SystemDiags/cryptRSA.efi
EFI/HP/SystemDiags/systemDiags.efi
EFI/HP/SystemRecovery/bootmgfw.efi
Windows 8 loader on /dev/sda4
windows Recovery Environment on /dev/sda5
system setup
Si je choisi:
Ubuntu linux 3.8.0-31-generic je reste bloqué sur un écran violet vide
Windows UEFI bkpbootmgfw.efi windows 8 démarre sans aucun problème
Windows Boot UEFI loader windows 8 démarre sans aucun problème
Windows 8 loader on /dev/sda4 j'obtiens "unknown command drive map", "invalid EFI file path" et je reviens sur le menu de grub
J'ai déjà fais deux réinstallations d'Ubuntu et deux réparations successives avec Ubuntu boot repair et je tourne en rond.
Comment faire pour démarrer Ubuntu ?
Merci
Dernière modification par morane (Le 13/10/2013, à 17:01)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#2 Le 10/10/2013, à 11:49
- malbo
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Pourrais-tu rectifier (à trois endroits) : tu as écrit 10.04.3 alors qu'il s'agit de 13.04 (le premier désigne Lucid alors que tu as installé Raring)
Ton installation proprement dite est correcte, ton dual-boot est correct. C'est seulement que tu as un souci de fonctionnement de Ubuntu lui-même, probablement un problème d'affichage.
Edit : peux-tu essayer de démarrer sur la deuxième ligne du menu Grub (Ubuntu linux 3.8.0-31-generic (recovery)) pour voir si tu peux démarrer une session graphique ou bien si ça fait pareil (bloqué sur écran violet). Il faudra prendre resume dans le menu de dépannage
Dernière modification par malbo (Le 10/10/2013, à 12:11)
Hors ligne
#3 Le 10/10/2013, à 16:44
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Bonjour Malbo,
En fait c'est Ubuntu 12.04.3 LTS que j'ai installé.
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#4 Le 10/10/2013, à 16:50
- malbo
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
En fait c'est Ubuntu 12.04.3 LTS que j'ai installé.
Au temps pour moi. Oui, c'est bien 12.04.3. Peux-tu remplacer 10.04.3 par 12.04.3 dans ton titre et ton post #1 (il y a 3 endroits concernés) ?
Hors ligne
#5 Le 10/10/2013, à 21:38
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Tu as raison Malbo il faut être précis.
Si je choisi de démarrer sur Ubuntu linux 3.8.0-31-generic (recovery) je reste bloqué sur un écran noir.
Est ce qu'il serait possible que Grub ne pointe pas sur Ubuntu ?
J'ai du mal à imaginer que ce soit un problème d'affichage car si non pourquoi le livecd fonctionnerait ? et pourquoi Ubuntu Recovery serait concerné ?
Au fait voici le boot info généré par boot repair:
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 27Sep2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/HP/BiosUpdate/CryptRSA.efi
/EFI/HP/BiosUpdate/CryptRSA32.efi
/EFI/HP/BiosUpdate/HpBiosUpdate.efi
/EFI/HP/BiosUpdate/HpBiosUpdate32.efi
/EFI/HP/SystemDiags/CryptRSA.efi
/EFI/HP/SystemDiags/CryptRSA32.efi
/EFI/HP/SystemDiags/SystemDiags.efi
/EFI/HP/SystemRecovery/bootmgfw.efi
/EFI/Microsoft/Boot/bkpbootmgfw.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/bootx64.efi
/EFI/Microsoft/Boot/memtest.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sda6: __________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda7: __________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda9: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 2,097,151 2,095,104 Windows Recovery Environment (Windows)
/dev/sda2 2,097,152 2,834,431 737,280 EFI System partition
/dev/sda3 2,834,432 3,096,575 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 3,096,576 207,896,575 204,800,000 Data partition (Windows/Linux)
/dev/sda5 1,924,059,136 1,953,525,134 29,465,999 Data partition (Windows/Linux)
/dev/sda6 207,896,576 372,647,935 164,751,360 Data partition (Windows/Linux)
/dev/sda7 372,647,936 444,012,543 71,364,608 Data partition (Windows/Linux)
/dev/sda8 444,012,544 461,772,799 17,760,256 Swap partition (Linux)
/dev/sda9 461,772,800 1,924,059,135 1,462,286,336 Data partition (Windows/Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 9EEA5072EA5048A3 ntfs Windows RE tools
/dev/sda2 2E43-7292 vfat SYSTEM
/dev/sda4 766EDA826EDA3A97 ntfs Windows
/dev/sda5 C236680E3668062F ntfs Recovery Image
/dev/sda6 6f4ab6cb-6e7e-4863-ad56-b2549053905e ext3
/dev/sda7 ddf40258-c189-4beb-b93c-09ff9f850827 ext3 home
/dev/sda8 e0415441-6b90-404f-9763-c840b66a6781 swap
/dev/sda9 4E5ADCE61F2BECDC ntfs donnees
/dev/sr0 iso9660 Ubuntu 12.04.3 LTS amd64
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
Et voici le fichier fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=6f4ab6cb-6e7e-4863-ad56-b2549053905e / ext3 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
#UUID=2E43-7292 /boot/efi vfat defaults 0 1
# /home was on /dev/sda7 during installation
UUID=ddf40258-c189-4beb-b93c-09ff9f850827 /home ext3 defaults 0 2
# /media/donnees was on /dev/sda9 during installation
UUID=4E5ADCE61F2BECDC /media/donnees ntfs defaults,umask=007,gid=46 0 0
# /mnt/windows was on /dev/sda4 during installation
UUID=766EDA826EDA3A97 /mnt/windows ntfs defaults,umask=007,gid=46 0 0
# swap was on /dev/sda8 during installation
UUID=e0415441-6b90-404f-9763-c840b66a6781 none swap sw 0 0
UUID=2E43-7292 /boot/efi vfat defaults 0 1
Dernière modification par morane (Le 10/10/2013, à 22:34)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#6 Le 10/10/2013, à 23:16
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Si je tape "e" en me positionnant sur la ligne Ubuntu linux 3.8.0-31-generic du menu de grub, j'obtiens:
setparams 'Ubuntu, with Linux 3.8.0-31-generic'
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root 6f4ab6cb-6e7e-4863-ad56-b2549053905e
linux /boot/vmlinuz-3.8.0-31-generic.efi.signed root=UUID=6f4ab6cb-6e7e-4863-ad56-b2549053905e ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-31-generic
Si je presse F10 pour booter, je retombe sur cet écran violet vide.
Si je tape "e" en me positionnant sur la ligne Ubuntu linux 3.8.0-31-generic (recovery mode)' du menu de grub, j'obtiens:
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root 6f4ab6cb-6e7e-4863-ad56-b2549053905e
echo 'Loading Linux 3.8.0-31-generic ...'
linux /boot/vmlinuz-3.8.0-31-generic.efi.signed root=UUID=6f4ab6cb-6e7e-4863-ad56-b2549053905e ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-31generic
Pourquoi il indique insmod ext2 alors que je n'ai aucune partition de ce type ?
Dernière modification par morane (Le 10/10/2013, à 23:57)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#7 Le 11/10/2013, à 08:11
- malbo
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Ce que je vois comme anomalie, c'est que tu as adopté le format EXT3 au lieu du format EXT4 pour la partition racine. Je ne dis pas que ça ne peut pas marcher en EXT3, je n'en sait rien. Mais pourquoi ne pas prendre le format EXT4 préconisé dans la doc ? A l'avenir, utilise le format EXT4 pour la racine et aussi pour /home.
La mention "insmod ext2" est normale.
A part cela, moi je ne sais pas dire pourquoi Ubuntu ne fonctionne pas chez toi.
Dernière modification par malbo (Le 11/10/2013, à 08:12)
Hors ligne
#8 Le 11/10/2013, à 08:19
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Bonjour Malbo,
Je suis au bureau donc je ferai les essais ce soir en essayant ton idée de format EXT4
En y reflechissant, je pense que soit :
grub ne pointe pas sur le noyau correctement, pourtant le UUID indiqué dans le grub correspond bien à la partition où est installée Ubuntu
ou
grub ne démarre pas le noyau avec les bonnes options et dans ce cas, si un Ubuntu user, qui a installé Ubuntu 12.04.3 en dual boot (ou non) pouvait poster la liste des instructions du démarrage de grub (faire "e" sur la ligne de démarrage), cela me permettrait de voir s'il y a des différences.
Je suis preneur de toutes les suggestions.
Merci
Dernière modification par morane (Le 11/10/2013, à 08:22)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#9 Le 11/10/2013, à 08:27
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Malbo,
Je ne suis pas sur de moi, je l'écris de mémoire, mais je pense avoir un dossier dans mon Systeme tel que:
/boot/efi
dans lequel il n'y a rien or je vois dans le fstab:
UUID=2E43-7292 /boot/efi vfat defaults 0 1
Peux tu m'expliquer les tenants et aboutissant de ceci ?
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#10 Le 11/10/2013, à 10:44
- malbo
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Cette ligne de ton fstab concernant le montage de la partition EFI (sda2) est parfaitement normale dans une installation en mode UEFI de Ubuntu. Ce montage de la partition EFI (sda2) sert à mettre à jour le fichier /EFI/ubuntu/grubx64.efi qui se trouve précisément dans cette partition sda2. Cette mise à jour de grubx64.efi n'est faite que rarement dans le cas d'une mise à jour "lourde" de grub-efi. Autant dire que ce montage au démarrage de la partition EFI ne sert quasiment jamais et même si tu commentais cette ligne dans ton fstab, ça ne changerait rien au fonctionnement (ça démarrerait sans problème) mais je ne suis pas en train de te dire de le faire, hein ?
Hors ligne
#11 Le 11/10/2013, à 11:46
- maxire
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Salut,
En réponse au post 8,
grub ne démarre pas le noyau avec les bonnes options et dans ce cas, si un Ubuntu user, qui a installé Ubuntu 12.04.3 en dual boot (ou non) pouvait poster la liste des instructions du démarrage de grub (faire "e" sur la ligne de démarrage), cela me permettrait de voir s'il y a des différences.
J'ai une 12.04 en uefi, outre le fait que j'utilise un noyau 3.2.0 et non un 3.8.0, mon noyau est non signé uefi comme dans ton cas
linux /boot/vmlinuz-3.8.0-31-generic.efi.signed ...
Ce que j'ai :
linux /boot/vmlinuz-3.2.0-54-generic root=UUID=b3917fc7-a211-4a84-9b46-9cc4867cee37 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.2.0-54-generic
Je ne saurais pas dire pourquoi mon noyau est non signé, je vais faire un test en utilisant un noyau signé, ils sont disponibles dans les dépôts.
Je vous tiens au courant.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#12 Le 11/10/2013, à 11:55
- maxire
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Ah tiens donc, j'ai un beau "kernel panic" avec le 3.8.0.31-generic.efi.signed ...
En mode recovery, idem, ... message concernant la partition root qui ne veut pas se monter, pas analysé plus que cela.
Par contre, surprise, l'installation du noyau signé a également mis dans le menu grub une option de démarrage du noyau non signé 3.8.31-generic, qui fonctionne.
Si ces informations peuvent aider.
@+
Dernière modification par maxire (Le 11/10/2013, à 12:04)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#13 Le 11/10/2013, à 12:07
- malbo
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
maxire,
Je n'en suis pas sûr (et de plus je ne connais pas ton installation) mais pour que tu puisses démarrer sur ce noyau "signé", il faut que tu actives provisoirement le paramètre "Secure Boot" dans ton UEFI/BIOS (tu as dû le désactiver pour arriver à installer et à faire fonctionner Ubuntu avec le noyau 3.2.0-54)
Dernière modification par malbo (Le 11/10/2013, à 12:09)
Hors ligne
#14 Le 11/10/2013, à 12:26
- maxire
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Exact Malbo, donc mon cas de test ne prouve strictement rien.
J'imagine que morane n'a pas d'autre choix que d'utiliser le secure boot.
Bonne investigation !
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#15 Le 11/10/2013, à 18:10
- maxire
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
En fait, je viens d'avoir un mal fou à me débarrasser des noyaux 3.8.0-31, j'ai obtenu des écrans noirs y compris avec le noyau non signé, et cela empêchait même le démarrage de la session graphique avec les noyaux 3.2.0. Ce qui est tout de même étrange.
Situation rétablie après nettoyage des noyaux 3.8.0-31.
Histoire de vérifier je suis passé d'un noyau 3.8.0-19 à un noyau 3.8.0-31 sur une machine virtuelle en ubuntu 13.04.
Oups, écran noir également, retour à la 3.8.0-19 pour régler le problème.
Je suspecte donc le noyau 3.8.0-31 d'être à l'origine du problème.
Je pense comme Malbo au post #7, que ce n'est pas un problème d'installation mais plutôt de ubuntu lui-même.
Peut-être qu'en utilisant des noyaux 3.5.0 cela serait mieux ?
Ou bien redescendre à un noyau 3.8.0-19 ?
Il ne sera pas nécessaire de tout réinstaller, il suffira de lancer le disque d'installation en mode "test de ubuntu", de chrooter sur la partition root, installer un noyau 3.5, nettoyer les 3.8.0 un update-grub le tout suivi d'un reboot.
Et si cela ne fonctionne pas avec un 3.5.0 essayer avec un 3.2.0.
Oui, je sais, tout cela est empirique, nous vivons une époque très moderne !
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#16 Le 11/10/2013, à 22:30
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Bonsoir,
J'ai relancé l'installation en choisissant des partitions de type ext4 pour / et Home et en cochant télécharger les mises à jour pendant l'installation, résultat: blocage habituel sur l'écran violet.
Je recommence, en n'activant pas les mises à jour pendant l'installation, j'arrive sur le noyau 3.8.0-31 et ça bloque toujours.
Si je choisi de redémarrer avec l'option "previous version", je tombe sur la 3.8.0-29-generic qui bloque de la même manière.
Je redémarre avec le livecd ubuntu 13.04 en mode essai, tout est ok. Je lance l'installation d'Ubuntu 13.04 tout se passe comme prévu et quand je redémarre, j'arrive sur un:
error: no such device: 6f4ab6cb-6e7e-4863-ad56-b2549053905e
grub rescue>
Je redémarre avec le livecd 13.04, j'utilise boot-repair pour remettre tout en ordre, cette fois-ci, j'ai un grub avec toutes les options de boot et le choix entre 3.8.0-19-generic ou 3.8.0-19-generic (recovery mode)
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 27Sep2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/HP/BiosUpdate/CryptRSA.efi
/EFI/HP/BiosUpdate/CryptRSA32.efi
/EFI/HP/BiosUpdate/HpBiosUpdate.efi
/EFI/HP/BiosUpdate/HpBiosUpdate32.efi
/EFI/HP/SystemDiags/CryptRSA.efi
/EFI/HP/SystemDiags/CryptRSA32.efi
/EFI/HP/SystemDiags/SystemDiags.efi
/EFI/HP/SystemRecovery/bootmgfw.efi
/EFI/Microsoft/Boot/bkpbootmgfw.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/bootx64.efi
/EFI/Microsoft/Boot/memtest.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /boot/grub/grub.cfg /etc/fstab
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda9: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 2,097,151 2,095,104 Windows Recovery Environment (Windows)
/dev/sda2 2,097,152 2,834,431 737,280 EFI System partition
/dev/sda3 2,834,432 3,096,575 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 3,096,576 207,896,575 204,800,000 Data partition (Windows/Linux)
/dev/sda5 1,924,059,136 1,953,525,134 29,465,999 Data partition (Windows/Linux)
/dev/sda6 207,896,576 372,647,935 164,751,360 Data partition (Windows/Linux)
/dev/sda7 372,647,936 444,012,543 71,364,608 Data partition (Windows/Linux)
/dev/sda8 444,012,544 461,772,799 17,760,256 Swap partition (Linux)
/dev/sda9 461,772,800 1,924,059,135 1,462,286,336 Data partition (Windows/Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 9EEA5072EA5048A3 ntfs Windows RE tools
/dev/sda2 2E43-7292 vfat SYSTEM
/dev/sda4 766EDA826EDA3A97 ntfs Windows
/dev/sda5 C236680E3668062F ntfs Recovery Image
/dev/sda6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf ext4
/dev/sda7 54a40272-a898-4d08-84d9-d639d299bf8b ext4
/dev/sda8 e0415441-6b90-404f-9763-c840b66a6781 swap
/dev/sda9 4E5ADCE61F2BECDC ntfs donnees
/dev/sr0 iso9660 Ubuntu 13.04 amd64
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
else
search --no-floppy --fs-uuid --set=root 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-02deaf69-7ae0-4c3b-99d0-899d5e3604cf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
else
search --no-floppy --fs-uuid --set=root 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
fi
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=02deaf69-7ae0-4c3b-99d0-899d5e3604cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-19-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-02deaf69-7ae0-4c3b-99d0-899d5e3604cf' {
menuentry 'Ubuntu, with Linux 3.8.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-02deaf69-7ae0-4c3b-99d0-899d5e3604cf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
else
search --no-floppy --fs-uuid --set=root 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
fi
echo 'Loading Linux 3.8.0-19-generic ...'
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=02deaf69-7ae0-4c3b-99d0-899d5e3604cf ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-19-generic
}
menuentry 'Ubuntu, with Linux 3.8.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-02deaf69-7ae0-4c3b-99d0-899d5e3604cf' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
else
search --no-floppy --fs-uuid --set=root 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
fi
echo 'Loading Linux 3.8.0-19-generic ...'
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=02deaf69-7ae0-4c3b-99d0-899d5e3604cf ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-19-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "Windows UEFI bkpbootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi
}
menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
menuentry "EFI/HP/BiosUpdate/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/BiosUpdate/CryptRSA32.efi
}
menuentry "EFI/HP/BiosUpdate/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/BiosUpdate/CryptRSA.efi
}
menuentry "EFI/HP/BiosUpdate/HpBiosUpdate32.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/BiosUpdate/HpBiosUpdate32.efi
}
menuentry "EFI/HP/BiosUpdate/HpBiosUpdate.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/BiosUpdate/HpBiosUpdate.efi
}
menuentry "EFI/HP/SystemDiags/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA32.efi
}
menuentry "EFI/HP/SystemDiags/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA.efi
}
menuentry "EFI/HP/SystemDiags/SystemDiags.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags.efi
}
menuentry "EFI/HP/SystemRecovery/bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/SystemRecovery/bootmgfw.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 8 (loader) (on /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-766EDA826EDA3A97' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 766EDA826EDA3A97
else
search --no-floppy --fs-uuid --set=root 766EDA826EDA3A97
fi
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows Recovery Environment (loader) (on /dev/sda5)' --class windows --class os $menuentry_id_option 'osprober-chain-C236680E3668062F' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 C236680E3668062F
else
search --no-floppy --fs-uuid --set=root C236680E3668062F
fi
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=02deaf69-7ae0-4c3b-99d0-899d5e3604cf / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
#UUID=2E43-7292 /boot/efi vfat defaults 0 1
# /home was on /dev/sda7 during installation
UUID=54a40272-a898-4d08-84d9-d639d299bf8b /home ext4 defaults 0 2
# /media/donnees was on /dev/sda9 during installation
UUID=4E5ADCE61F2BECDC /media/donnees ntfs defaults,umask=007,gid=46 0 0
# /mnt/windows was on /dev/sda4 during installation
UUID=766EDA826EDA3A97 /mnt/windows ntfs defaults,umask=007,gid=46 0 0
# swap was on /dev/sda8 during installation
UUID=e0415441-6b90-404f-9763-c840b66a6781 none swap sw 0 0
UUID=2E43-7292 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
123.268749237 = 132.358811648 boot/grub/grub.cfg 1
99.790145874 = 107.148853248 boot/vmlinuz-3.8.0-19-generic 1
99.790145874 = 107.148853248 vmlinuz 1
100.811920166 = 108.245975040 boot/initrd.img-3.8.0-19-generic 1
100.811920166 = 108.245975040 initrd.img 1
=============================== StdErr Messages: ===============================
File descriptor 8 (/proc/4589/mounts) leaked on lvscan invocation. Parent PID 22355: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-10-11__20h11 ===================
boot-repair version : 3.199~ppa30~raring
boot-sav version : 3.199~ppa30~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa30~raring
boot-repair is executed in live-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda4:Windows 8 (loader):Windows:chain
/dev/sda5:Windows Recovery Environment (loader):Windows1:chain
/dev/sda6:Ubuntu 13.04 (13.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="Windows RE tools" UUID="9EEA5072EA5048A3" TYPE="ntfs"
/dev/sda2: LABEL="SYSTEM" UUID="2E43-7292" TYPE="vfat"
/dev/sda4: LABEL="Windows" UUID="766EDA826EDA3A97" TYPE="ntfs"
/dev/sda5: LABEL="Recovery Image" UUID="C236680E3668062F" TYPE="ntfs"
/dev/sda6: UUID="02deaf69-7ae0-4c3b-99d0-899d5e3604cf" TYPE="ext4"
/dev/sda7: UUID="54a40272-a898-4d08-84d9-d639d299bf8b" TYPE="ext4"
/dev/sda8: UUID="e0415441-6b90-404f-9763-c840b66a6781" TYPE="swap"
/dev/sda9: LABEL="donnees" UUID="4E5ADCE61F2BECDC" TYPE="ntfs"
/dev/sr0: LABEL="Ubuntu 13.04 amd64" TYPE="iso9660"
1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bkpbootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi
Presence of .bkp file detected: /mnt/boot-sav/sda2/EFI/Boot/bkpbootx64.efi
Presence of .bkp file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda5/EFI/Microsoft/Boot/cdboot.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda5/EFI/Microsoft/Boot/cdboot_noprompt.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda5/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda5/EFI/Boot/bootx64.efi.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Apr 24 17:05 grub.d
total 72
-rwxr-xr-x 1 root root 7541 Apr 9 2013 00_header
-rwxr-xr-x 1 root root 5974 Apr 9 2013 05_debian_theme
-rwxr-xr-x 1 root root 11381 Apr 9 2013 10_linux
-rwxr-xr-x 1 root root 10258 Apr 9 2013 20_linux_xen
-rwxr-xr-x 1 root root 1688 Dec 5 2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 Apr 9 2013 30_os-prober
-rwxr-xr-x 1 root root 1426 Apr 9 2013 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 9 2013 40_custom
-rwxr-xr-x 1 root root 216 Apr 9 2013 41_custom
-rw-r--r-- 1 root root 483 Apr 9 2013 README
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda6: UUID=2E43-7292 (sda2)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, grubenv-ok grub2, grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
sda7 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda7.
sda9 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda9.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 1074MB 1073MB ntfs Basic data partition hidden, diag
2 1074MB 1451MB 377MB fat32 EFI system partition boot
3 1451MB 1585MB 134MB Microsoft reserved partition msftres
4 1585MB 106GB 105GB ntfs Basic data partition
6 106GB 191GB 84.4GB ext4
7 191GB 227GB 36.5GB ext4
8 227GB 236GB 9093MB linux-swap(v1)
9 236GB 985GB 749GB ntfs
5 985GB 1000GB 15.1GB ntfs Basic data partition hidden
Model: hp CDDVDW SH-216BB (scsi)
Disk /dev/sr0: 4700MB
Sector size (logical/physical): 2048B/2048B
Partition Table: mac
Number Start End Size File system Name Flags
1 8192B 24.6kB 16.4kB Apple
2 3269MB 3278MB 9306kB EFI
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000DM003-1CH1;
1:1049kB:1074MB:1073MB:ntfs:Basic data partition:hidden, diag;
2:1074MB:1451MB:377MB:fat32:EFI system partition:boot;
3:1451MB:1585MB:134MB::Microsoft reserved partition:msftres;
4:1585MB:106GB:105GB:ntfs:Basic data partition:;
6:106GB:191GB:84.4GB:ext4::;
7:191GB:227GB:36.5GB:ext4::;
8:227GB:236GB:9093MB:linux-swap(v1)::;
9:236GB:985GB:749GB:ntfs::;
5:985GB:1000GB:15.1GB:ntfs:Basic data partition:hidden;
BYT;
/dev/sr0:4700MB:scsi:2048:2048:mac:hp CDDVDW SH-216BB;
1:8192B:24.6kB:16.4kB::Apple:;
2:3269MB:3278MB:9306kB::EFI:;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type vfat (rw)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)
/dev/sda7 on /mnt/boot-sav/sda7 type ext4 (rw)
/dev/sda9 on /mnt/boot-sav/sda9 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom vga_arbiter vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff f7 1f 00 00 00 00 00 |................|
00000030 00 55 01 00 00 00 00 00 02 00 00 00 00 00 00 00 |.U..............|
00000040 f6 00 00 00 01 00 00 00 a3 48 50 ea 72 50 ea 9e |.........HP.rP..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
ls /mnt/boot-sav/sda2/1:
ls /mnt/boot-sav/sda2: EFI
HP_TOOLS
screen001.bmp
SYSTEM . Please report this message to boot.repair@gmail.com
=================== hexdump -n512 -C /dev/sda2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 6e 1a |.X.MSDOS5.0...n.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 20 00 |........?..... .|
00000020 00 40 0b 00 c9 02 00 00 00 00 00 00 02 00 00 00 |.@..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 92 72 43 2e 4e 4f 20 4e 41 4d 45 20 20 |..).rC.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 40 2f 00 |........?....@/.|
00000020 00 00 00 00 80 00 80 00 ff ff 34 0c 00 00 00 00 |..........4.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 97 3a da 6e 82 da 6e 76 |.........:.n..nv|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 d0 ae 72 |........?......r|
00000020 00 00 00 00 80 00 80 00 8e 9d c1 01 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 2f 06 68 36 0e 68 36 c2 |......../.h6.h6.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda9
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 18 86 1b |........?.......|
00000020 00 00 00 00 80 00 80 00 ff b7 28 57 00 00 00 00 |..........(W....|
00000030 04 00 00 00 00 00 00 00 7f 8b 72 05 00 00 00 00 |..........r.....|
00000040 f6 00 00 00 01 00 00 00 dc ec 2b 1f e6 dc 5a 4e |..........+...ZN|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 2.9G 100M 2.8G 4% /
udev devtmpfs 2.9G 12K 2.9G 1% /dev
tmpfs tmpfs 585M 828K 584M 1% /run
/dev/sr0 iso9660 785M 785M 0 100% /cdrom
/dev/loop0 squashfs 738M 738M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 2.9G 1.1M 2.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 2.9G 76K 2.9G 1% /run/shm
none tmpfs 100M 32K 100M 1% /run/user
/dev/sda1 fuseblk 1023M 359M 665M 36% /mnt/boot-sav/sda1
/dev/sda2 vfat 356M 52M 305M 15% /mnt/boot-sav/sda2
/dev/sda4 fuseblk 98G 36G 63G 36% /mnt/boot-sav/sda4
/dev/sda5 fuseblk 15G 13G 1.8G 88% /mnt/boot-sav/sda5
/dev/sda6 ext4 78G 3.1G 71G 5% /mnt/boot-sav/sda6
/dev/sda7 ext4 34G 49M 32G 1% /mnt/boot-sav/sda7
/dev/sda9 fuseblk 698G 180M 698G 1% /mnt/boot-sav/sda9
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x53e6bbc2
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
EFI detected. Please check the options.
=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda6, using the following options: sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s backup-and-rename-efi-files
=================== Settings chosen by the user
Custom-Repair
This setting will purge () and reinstall the grub-efi of sda6, using the following options: sda2/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s backup-and-rename-efi-files rename-ms-efi
/boot/efi added in sda6/fstab
rm /mnt/boot-sav/sda2/efi/Microsoft/Boot/bootmgfw.efi
rm /mnt/boot-sav/sda2/efi/Microsoft/Boot/bootx64.efi /mnt/boot-sav/sda2/efi/Microsoft/Boot/bootx64.efi.grb
rm /mnt/boot-sav/sda2/efi/Boot/bootx64.efi
Mount sda2 on /mnt/boot-sav/sda6/boot/efi
ls /mnt/boot-sav/sda6/boot/efi/1:
ls /mnt/boot-sav/sda6/boot/efi: EFI
HP_TOOLS
screen001.bmp
SYSTEM . Please report this message to boot.repair@gmail.com
chroot /mnt/boot-sav/sda6 apt-get -y --force-yes update
Purge the GRUB of sda6
grub-efi available
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 268 not upgraded.
DEBCHECK debOK, grub-efi
DEBCHECK debOK
shim-signed available
linux-signed-generic available
Please type: sudo chroot "/mnt/boot-sav/sda6" dpkg --configure -ansudo chroot "/mnt/boot-sav/sda6" apt-get install -fynsudo chroot "/mnt/boot-sav/sda6" apt-get purge -y --force-yes grub*-common shim-signed linux-signed*
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Oct 11 20:16 grub.d
total 4
-rwxr-xr-x 1 root root 1688 Dec 5 2012 20_memtest86+
/boot/efi detected in the fstab of sda6: UUID=2E43-7292 (sda2)
Then type: sudo chroot "/mnt/boot-sav/sda6" apt-get install -y --force-yes grub-efi linux
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Oct 11 20:17 grub.d
drwxr-xr-x 2 root root 4096 Oct 11 20:16 grub.d.bak
total 68
-rwxr-xr-x 1 root root 7541 Apr 9 2013 00_header
-rwxr-xr-x 1 root root 5974 Apr 9 2013 05_debian_theme
-rwxr-xr-x 1 root root 11381 Apr 9 2013 10_linux
-rwxr-xr-x 1 root root 10258 Apr 9 2013 20_linux_xen
-rwxr-xr-x 1 root root 10976 Apr 9 2013 30_os-prober
-rwxr-xr-x 1 root root 1426 Apr 9 2013 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 9 2013 40_custom
-rwxr-xr-x 1 root root 216 Apr 9 2013 41_custom
-rw-r--r-- 1 root root 483 Apr 9 2013 README
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda6: UUID=2E43-7292 (sda2)
Unhide GRUB boot menu in sda6/etc/default/grub
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Oct 11 20:17 grub.d
drwxr-xr-x 2 root root 4096 Oct 11 20:16 grub.d.bak
total 68
-rwxr-xr-x 1 root root 7541 Apr 9 2013 00_header
-rwxr-xr-x 1 root root 5974 Apr 9 2013 05_debian_theme
-rwxr-xr-x 1 root root 11381 Apr 9 2013 10_linux
-rwxr-xr-x 1 root root 10258 Apr 9 2013 20_linux_xen
-rwxr-xr-x 1 root root 10976 Apr 9 2013 30_os-prober
-rwxr-xr-x 1 root root 1426 Apr 9 2013 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 9 2013 40_custom
-rwxr-xr-x 1 root root 216 Apr 9 2013 41_custom
-rw-r--r-- 1 root root 483 Apr 9 2013 README
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda6: UUID=2E43-7292 (sda2)
grub-install (GRUB) 2.00-13ubuntu3,grub-install (GRUB) 2.
chroot /mnt/boot-sav/sda6 efibootmgr -v
BootCurrent: 0008
Timeout: 2 seconds
BootOrder: 0008,0001,0002,0000,0004,0005,0006,0007
Boot0000* Windows Boot Manager HD(2,200000,b4000,92eb8564-f0da-4e41-b6a7-6903938feb6d)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0004* CD/DVD Drive BIOS(3,0,00)AMGOAMNO........o.h.p. .C.D.D.V.D.W. .S.H.-.2.1.6.B.B....................A...........................>..Gd-.;.A..MQ..L.8.R.M.T.Y.6.D.B.0.5.1.1.L.2. . . . . . ......AMBO
Boot0005* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0006* Hard Drive BIOS(2,0,00)AMGOAMNO........o.S.T.1.0.0.0.D.M.0.0.3.-.1.C.H.1.6.2....................A...........................>..Gd-.;.A..MQ..L.1.Z.5.D.N.P.N.E. . . . . . . . . . . . ......AMBO
Boot0007* Realtek PXE B03 D00 BIOS(6,0,00)AMBO
Boot0008* UEFI: hp CDDVDW SH-216BB ACPI(a0341d0,0)PCI(1f,2)03120a000100ffff0000CD-ROM(1,6168c,11c0)AMBO
chroot /mnt/boot-sav/sda6 uname -r
Kernel: 3.8.0-19-generic
Reinstall the grub-efi linux of sda6
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :0
ls /mnt/boot-sav/sda6/boot/efi/1:
ls /mnt/boot-sav/sda6/boot/efi: EFI
HP_TOOLS
screen001.bmp
SYSTEM . Please report this message to boot.repair@gmail.com
df /dev/sda2
Save and rename /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi (/mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi)
cp /mnt/boot-sav/sda6/boot/efi/EFI/ubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
df /dev/sda2
cp /mnt/boot-sav/sda6/boot/efi/EFI/ubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootx64.efi (& .grb)
df /dev/sda2
Save and rename /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi (/mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi)
cp /mnt/boot-sav/sda6/boot/efi/EFI/ubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
ls /mnt/boot-sav/sda6/boot/efi/1:
ls /mnt/boot-sav/sda6/boot/efi: EFI
HP_TOOLS
screen001.bmp
SYSTEM . Please report this message to boot.repair@gmail.com
Add /mnt/boot-sav/sda6/boot/efi efi entries in /mnt/boot-sav/sda6/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi
sda2/bkpbootx64.efi already added
sda2/bkpbootmgfw.efi already added
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BiosUpdate/CryptRSA32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BiosUpdate/CryptRSA.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BiosUpdate/HpBiosUpdate32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BiosUpdate/HpBiosUpdate.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/CryptRSA32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/CryptRSA.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/SystemDiags.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemRecovery/bootmgfw.efi
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :0
chroot /mnt/boot-sav/sda6 efibootmgr -v
BootCurrent: 0008
Timeout: 2 seconds
BootOrder: 0008,0001,0002,0000,0004,0005,0006,0007
Boot0000* Windows Boot Manager HD(2,200000,b4000,92eb8564-f0da-4e41-b6a7-6903938feb6d)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0004* CD/DVD Drive BIOS(3,0,00)AMGOAMNO........o.h.p. .C.D.D.V.D.W. .S.H.-.2.1.6.B.B....................A...........................>..Gd-.;.A..MQ..L.8.R.M.T.Y.6.D.B.0.5.1.1.L.2. . . . . . ......AMBO
Boot0005* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0006* Hard Drive BIOS(2,0,00)AMGOAMNO........o.S.T.1.0.0.0.D.M.0.0.3.-.1.C.H.1.6.2....................A...........................>..Gd-.;.A..MQ..L.1.Z.5.D.N.P.N.E. . . . . . . . . . . . ......AMBO
Boot0007* Realtek PXE B03 D00 BIOS(6,0,00)AMBO
Boot0008* UEFI: hp CDDVDW SH-216BB ACPI(a0341d0,0)PCI(1f,2)03120a000100ffff0000CD-ROM(1,6168c,11c0)AMBO
chroot /mnt/boot-sav/sda6 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.8.0-19-generic
Found initrd image: /boot/initrd.img-3.8.0-19-generic
Found Windows 8 (loader) on /dev/sda4
Found Windows Recovery Environment (loader) on /dev/sda5
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda6/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
Si je démarre avec le 3.8.0-19-generic, je retombe sur l'écran violet vide
Si je démarre avec le 3.8.0-19-generic (recovery mode) alors les deux lignes suivantes s'affichent (sur un fond violet):
Loading linux 3.8.0-19-generic ...
Loading initial ramdisk ...
et le curseur reste bloqué à ce niveau.
Si je choisi l'option Windows UEFI bkpbootmgfw.efi dans le menu de grub, alors windows 8 démarre sans problème.
Qu'est ce que je fais, je balance ce PC par la fenêtre ?
Dernière modification par morane (Le 11/10/2013, à 22:34)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#17 Le 11/10/2013, à 22:49
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Juste une idée comme cela:
dans le bios je réactive l'amorçage sécurisé et j'obtiens:
Violation d'amorçage sécurisé
Une signature non valide a été détectée. Vérifier la politique d'amorçage sécurisé dans Configuration
Je répond ok et j'obtiens:
>>Checking Media Presence...........
>>Media Present..............
>>Start PXE over IPv4
A ce niveau, je redémarre, je retourne dans le bios et je désactive l'amorçage sécurisée, je tape le mot de passe et j'arrive sur un écran noir, plus rien ne démarre.
Je refais la manip plusieurs fois, rien à faire, toujours cet écran noir, alors je mets un livecd dans le lecteur, je rentre dans le bios sans rien changer et en redémarrant, j'ai enfin vu le menu de grub d'Ubuntu installé sur le PC et je ne démarre pas sur le livecd.
Comme si le fait d'avoir mis le livecd dans le tirroir, lançait le menu de grub installé sur le disque dur.
Pour en avoir le coeur net, je redémarre le PC avec le livecd Ubuntu 12.04.3 et au lieu d'arriver sur le menu du livecd, j'arrive sur Ubuntu installé sur le disque dur (impossible de se tromper car il me demande mon mot de passe utilisateur).
Comment faire pour réparer ce grub qui a fait un mic mac entre le live cd et le disque dur ?
Dernière modification par morane (Le 11/10/2013, à 23:29)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#18 Le 11/10/2013, à 23:48
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Bon, pour résumer je suis sur Ubuntu installé sur le disque dur, que j'ai démarré avec le livecd (je ne comprends pas encore comment c'est possible).
J'enlève le livecd du tirroir.
J'installe Boot-repair et je lance la réparation en choisissant:
réinstaller grub
utiliser le fichier EFI standard
sauvegarder et renommer les fichiers EFI Windows
faire apparaitre le menu de démarrage
emplacement de grub sur Partition/boot/efi séparée sda2
purger Grub avant de le réinstaller
créer un rapport Bootinfo
participer aux statistiques
vérifier la connexion internet
Tout se passe comme prévu:
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 27Sep2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/HP/BiosUpdate/CryptRSA.efi
/EFI/HP/BiosUpdate/CryptRSA32.efi
/EFI/HP/BiosUpdate/HpBiosUpdate.efi
/EFI/HP/BiosUpdate/HpBiosUpdate32.efi
/EFI/HP/SystemDiags/CryptRSA.efi
/EFI/HP/SystemDiags/CryptRSA32.efi
/EFI/HP/SystemDiags/SystemDiags.efi
/EFI/HP/SystemRecovery/bootmgfw.efi
/EFI/Microsoft/Boot/bkpbootmgfw.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/bootx64.efi
/EFI/Microsoft/Boot/memtest.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /boot/grub/grub.cfg /etc/fstab
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda9: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 2,097,151 2,095,104 Windows Recovery Environment (Windows)
/dev/sda2 2,097,152 2,834,431 737,280 EFI System partition
/dev/sda3 2,834,432 3,096,575 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 3,096,576 207,896,575 204,800,000 Data partition (Windows/Linux)
/dev/sda5 1,924,059,136 1,953,525,134 29,465,999 Data partition (Windows/Linux)
/dev/sda6 207,896,576 372,647,935 164,751,360 Data partition (Windows/Linux)
/dev/sda7 372,647,936 444,012,543 71,364,608 Data partition (Windows/Linux)
/dev/sda8 444,012,544 461,772,799 17,760,256 Swap partition (Linux)
/dev/sda9 461,772,800 1,924,059,135 1,462,286,336 Data partition (Windows/Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 9EEA5072EA5048A3 ntfs Windows RE tools
/dev/sda2 2E43-7292 vfat SYSTEM
/dev/sda4 766EDA826EDA3A97 ntfs Windows
/dev/sda5 C236680E3668062F ntfs Recovery Image
/dev/sda6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf ext4
/dev/sda7 54a40272-a898-4d08-84d9-d639d299bf8b ext4
/dev/sda8 e0415441-6b90-404f-9763-c840b66a6781 swap
/dev/sda9 4E5ADCE61F2BECDC ntfs donnees
/dev/sr0 iso9660 Ubuntu 13.04 amd64
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
else
search --no-floppy --fs-uuid --set=root 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-02deaf69-7ae0-4c3b-99d0-899d5e3604cf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
else
search --no-floppy --fs-uuid --set=root 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
fi
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=02deaf69-7ae0-4c3b-99d0-899d5e3604cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-19-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-02deaf69-7ae0-4c3b-99d0-899d5e3604cf' {
menuentry 'Ubuntu, with Linux 3.8.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-02deaf69-7ae0-4c3b-99d0-899d5e3604cf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
else
search --no-floppy --fs-uuid --set=root 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
fi
echo 'Loading Linux 3.8.0-19-generic ...'
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=02deaf69-7ae0-4c3b-99d0-899d5e3604cf ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-19-generic
}
menuentry 'Ubuntu, with Linux 3.8.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-02deaf69-7ae0-4c3b-99d0-899d5e3604cf' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
else
search --no-floppy --fs-uuid --set=root 02deaf69-7ae0-4c3b-99d0-899d5e3604cf
fi
echo 'Loading Linux 3.8.0-19-generic ...'
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=02deaf69-7ae0-4c3b-99d0-899d5e3604cf ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-19-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "Windows UEFI bkpbootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi
}
menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
menuentry "EFI/HP/BiosUpdate/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/BiosUpdate/CryptRSA32.efi
}
menuentry "EFI/HP/BiosUpdate/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/BiosUpdate/CryptRSA.efi
}
menuentry "EFI/HP/BiosUpdate/HpBiosUpdate32.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/BiosUpdate/HpBiosUpdate32.efi
}
menuentry "EFI/HP/BiosUpdate/HpBiosUpdate.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/BiosUpdate/HpBiosUpdate.efi
}
menuentry "EFI/HP/SystemDiags/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA32.efi
}
menuentry "EFI/HP/SystemDiags/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA.efi
}
menuentry "EFI/HP/SystemDiags/SystemDiags.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags.efi
}
menuentry "EFI/HP/SystemRecovery/bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 2E43-7292
chainloader (${root})/EFI/HP/SystemRecovery/bootmgfw.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 8 (loader) (on /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-766EDA826EDA3A97' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 766EDA826EDA3A97
else
search --no-floppy --fs-uuid --set=root 766EDA826EDA3A97
fi
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows Recovery Environment (loader) (on /dev/sda5)' --class windows --class os $menuentry_id_option 'osprober-chain-C236680E3668062F' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 C236680E3668062F
else
search --no-floppy --fs-uuid --set=root C236680E3668062F
fi
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=02deaf69-7ae0-4c3b-99d0-899d5e3604cf / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
#UUID=2E43-7292 /boot/efi vfat defaults 0 1
# /home was on /dev/sda7 during installation
UUID=54a40272-a898-4d08-84d9-d639d299bf8b /home ext4 defaults 0 2
# /media/donnees was on /dev/sda9 during installation
UUID=4E5ADCE61F2BECDC /media/donnees ntfs defaults,umask=007,gid=46 0 0
# /mnt/windows was on /dev/sda4 during installation
UUID=766EDA826EDA3A97 /mnt/windows ntfs defaults,umask=007,gid=46 0 0
# swap was on /dev/sda8 during installation
UUID=e0415441-6b90-404f-9763-c840b66a6781 none swap sw 0 0
UUID=2E43-7292 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
123.268749237 = 132.358811648 boot/grub/grub.cfg 1
99.790145874 = 107.148853248 boot/vmlinuz-3.8.0-19-generic 1
99.790145874 = 107.148853248 vmlinuz 1
100.811920166 = 108.245975040 boot/initrd.img-3.8.0-19-generic 1
100.811920166 = 108.245975040 initrd.img 1
=============================== StdErr Messages: ===============================
File descriptor 8 (/proc/4589/mounts) leaked on lvscan invocation. Parent PID 22355: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-10-11__20h11 ===================
boot-repair version : 3.199~ppa30~raring
boot-sav version : 3.199~ppa30~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa30~raring
boot-repair is executed in live-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda4:Windows 8 (loader):Windows:chain
/dev/sda5:Windows Recovery Environment (loader):Windows1:chain
/dev/sda6:Ubuntu 13.04 (13.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="Windows RE tools" UUID="9EEA5072EA5048A3" TYPE="ntfs"
/dev/sda2: LABEL="SYSTEM" UUID="2E43-7292" TYPE="vfat"
/dev/sda4: LABEL="Windows" UUID="766EDA826EDA3A97" TYPE="ntfs"
/dev/sda5: LABEL="Recovery Image" UUID="C236680E3668062F" TYPE="ntfs"
/dev/sda6: UUID="02deaf69-7ae0-4c3b-99d0-899d5e3604cf" TYPE="ext4"
/dev/sda7: UUID="54a40272-a898-4d08-84d9-d639d299bf8b" TYPE="ext4"
/dev/sda8: UUID="e0415441-6b90-404f-9763-c840b66a6781" TYPE="swap"
/dev/sda9: LABEL="donnees" UUID="4E5ADCE61F2BECDC" TYPE="ntfs"
/dev/sr0: LABEL="Ubuntu 13.04 amd64" TYPE="iso9660"
1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bkpbootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi
Presence of .bkp file detected: /mnt/boot-sav/sda2/EFI/Boot/bkpbootx64.efi
Presence of .bkp file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda5/EFI/Microsoft/Boot/cdboot.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda5/EFI/Microsoft/Boot/cdboot_noprompt.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda5/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda5/EFI/Boot/bootx64.efi.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Apr 24 17:05 grub.d
total 72
-rwxr-xr-x 1 root root 7541 Apr 9 2013 00_header
-rwxr-xr-x 1 root root 5974 Apr 9 2013 05_debian_theme
-rwxr-xr-x 1 root root 11381 Apr 9 2013 10_linux
-rwxr-xr-x 1 root root 10258 Apr 9 2013 20_linux_xen
-rwxr-xr-x 1 root root 1688 Dec 5 2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 Apr 9 2013 30_os-prober
-rwxr-xr-x 1 root root 1426 Apr 9 2013 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 9 2013 40_custom
-rwxr-xr-x 1 root root 216 Apr 9 2013 41_custom
-rw-r--r-- 1 root root 483 Apr 9 2013 README
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda6: UUID=2E43-7292 (sda2)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, grubenv-ok grub2, grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
sda7 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda7.
sda9 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda9.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 1074MB 1073MB ntfs Basic data partition hidden, diag
2 1074MB 1451MB 377MB fat32 EFI system partition boot
3 1451MB 1585MB 134MB Microsoft reserved partition msftres
4 1585MB 106GB 105GB ntfs Basic data partition
6 106GB 191GB 84.4GB ext4
7 191GB 227GB 36.5GB ext4
8 227GB 236GB 9093MB linux-swap(v1)
9 236GB 985GB 749GB ntfs
5 985GB 1000GB 15.1GB ntfs Basic data partition hidden
Model: hp CDDVDW SH-216BB (scsi)
Disk /dev/sr0: 4700MB
Sector size (logical/physical): 2048B/2048B
Partition Table: mac
Number Start End Size File system Name Flags
1 8192B 24.6kB 16.4kB Apple
2 3269MB 3278MB 9306kB EFI
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000DM003-1CH1;
1:1049kB:1074MB:1073MB:ntfs:Basic data partition:hidden, diag;
2:1074MB:1451MB:377MB:fat32:EFI system partition:boot;
3:1451MB:1585MB:134MB::Microsoft reserved partition:msftres;
4:1585MB:106GB:105GB:ntfs:Basic data partition:;
6:106GB:191GB:84.4GB:ext4::;
7:191GB:227GB:36.5GB:ext4::;
8:227GB:236GB:9093MB:linux-swap(v1)::;
9:236GB:985GB:749GB:ntfs::;
5:985GB:1000GB:15.1GB:ntfs:Basic data partition:hidden;
BYT;
/dev/sr0:4700MB:scsi:2048:2048:mac:hp CDDVDW SH-216BB;
1:8192B:24.6kB:16.4kB::Apple:;
2:3269MB:3278MB:9306kB::EFI:;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type vfat (rw)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)
/dev/sda7 on /mnt/boot-sav/sda7 type ext4 (rw)
/dev/sda9 on /mnt/boot-sav/sda9 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom vga_arbiter vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff f7 1f 00 00 00 00 00 |................|
00000030 00 55 01 00 00 00 00 00 02 00 00 00 00 00 00 00 |.U..............|
00000040 f6 00 00 00 01 00 00 00 a3 48 50 ea 72 50 ea 9e |.........HP.rP..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
ls /mnt/boot-sav/sda2/1:
ls /mnt/boot-sav/sda2: EFI
HP_TOOLS
screen001.bmp
SYSTEM . Please report this message to boot.repair@gmail.com
=================== hexdump -n512 -C /dev/sda2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 6e 1a |.X.MSDOS5.0...n.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 20 00 |........?..... .|
00000020 00 40 0b 00 c9 02 00 00 00 00 00 00 02 00 00 00 |.@..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 92 72 43 2e 4e 4f 20 4e 41 4d 45 20 20 |..).rC.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 40 2f 00 |........?....@/.|
00000020 00 00 00 00 80 00 80 00 ff ff 34 0c 00 00 00 00 |..........4.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 97 3a da 6e 82 da 6e 76 |.........:.n..nv|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 d0 ae 72 |........?......r|
00000020 00 00 00 00 80 00 80 00 8e 9d c1 01 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 2f 06 68 36 0e 68 36 c2 |......../.h6.h6.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda9
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 18 86 1b |........?.......|
00000020 00 00 00 00 80 00 80 00 ff b7 28 57 00 00 00 00 |..........(W....|
00000030 04 00 00 00 00 00 00 00 7f 8b 72 05 00 00 00 00 |..........r.....|
00000040 f6 00 00 00 01 00 00 00 dc ec 2b 1f e6 dc 5a 4e |..........+...ZN|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 2.9G 100M 2.8G 4% /
udev devtmpfs 2.9G 12K 2.9G 1% /dev
tmpfs tmpfs 585M 828K 584M 1% /run
/dev/sr0 iso9660 785M 785M 0 100% /cdrom
/dev/loop0 squashfs 738M 738M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 2.9G 1.1M 2.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 2.9G 76K 2.9G 1% /run/shm
none tmpfs 100M 32K 100M 1% /run/user
/dev/sda1 fuseblk 1023M 359M 665M 36% /mnt/boot-sav/sda1
/dev/sda2 vfat 356M 52M 305M 15% /mnt/boot-sav/sda2
/dev/sda4 fuseblk 98G 36G 63G 36% /mnt/boot-sav/sda4
/dev/sda5 fuseblk 15G 13G 1.8G 88% /mnt/boot-sav/sda5
/dev/sda6 ext4 78G 3.1G 71G 5% /mnt/boot-sav/sda6
/dev/sda7 ext4 34G 49M 32G 1% /mnt/boot-sav/sda7
/dev/sda9 fuseblk 698G 180M 698G 1% /mnt/boot-sav/sda9
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x53e6bbc2
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
EFI detected. Please check the options.
=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda6, using the following options: sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s backup-and-rename-efi-files
=================== Settings chosen by the user
Custom-Repair
This setting will purge () and reinstall the grub-efi of sda6, using the following options: sda2/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s backup-and-rename-efi-files rename-ms-efi
/boot/efi added in sda6/fstab
rm /mnt/boot-sav/sda2/efi/Microsoft/Boot/bootmgfw.efi
rm /mnt/boot-sav/sda2/efi/Microsoft/Boot/bootx64.efi /mnt/boot-sav/sda2/efi/Microsoft/Boot/bootx64.efi.grb
rm /mnt/boot-sav/sda2/efi/Boot/bootx64.efi
Mount sda2 on /mnt/boot-sav/sda6/boot/efi
ls /mnt/boot-sav/sda6/boot/efi/1:
ls /mnt/boot-sav/sda6/boot/efi: EFI
HP_TOOLS
screen001.bmp
SYSTEM . Please report this message to boot.repair@gmail.com
chroot /mnt/boot-sav/sda6 apt-get -y --force-yes update
Purge the GRUB of sda6
grub-efi available
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 268 not upgraded.
DEBCHECK debOK, grub-efi
DEBCHECK debOK
shim-signed available
linux-signed-generic available
Please type: sudo chroot "/mnt/boot-sav/sda6" dpkg --configure -ansudo chroot "/mnt/boot-sav/sda6" apt-get install -fynsudo chroot "/mnt/boot-sav/sda6" apt-get purge -y --force-yes grub*-common shim-signed linux-signed*
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Oct 11 20:16 grub.d
total 4
-rwxr-xr-x 1 root root 1688 Dec 5 2012 20_memtest86+
/boot/efi detected in the fstab of sda6: UUID=2E43-7292 (sda2)
Then type: sudo chroot "/mnt/boot-sav/sda6" apt-get install -y --force-yes grub-efi linux
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Oct 11 20:17 grub.d
drwxr-xr-x 2 root root 4096 Oct 11 20:16 grub.d.bak
total 68
-rwxr-xr-x 1 root root 7541 Apr 9 2013 00_header
-rwxr-xr-x 1 root root 5974 Apr 9 2013 05_debian_theme
-rwxr-xr-x 1 root root 11381 Apr 9 2013 10_linux
-rwxr-xr-x 1 root root 10258 Apr 9 2013 20_linux_xen
-rwxr-xr-x 1 root root 10976 Apr 9 2013 30_os-prober
-rwxr-xr-x 1 root root 1426 Apr 9 2013 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 9 2013 40_custom
-rwxr-xr-x 1 root root 216 Apr 9 2013 41_custom
-rw-r--r-- 1 root root 483 Apr 9 2013 README
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda6: UUID=2E43-7292 (sda2)
Unhide GRUB boot menu in sda6/etc/default/grub
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Oct 11 20:17 grub.d
drwxr-xr-x 2 root root 4096 Oct 11 20:16 grub.d.bak
total 68
-rwxr-xr-x 1 root root 7541 Apr 9 2013 00_header
-rwxr-xr-x 1 root root 5974 Apr 9 2013 05_debian_theme
-rwxr-xr-x 1 root root 11381 Apr 9 2013 10_linux
-rwxr-xr-x 1 root root 10258 Apr 9 2013 20_linux_xen
-rwxr-xr-x 1 root root 10976 Apr 9 2013 30_os-prober
-rwxr-xr-x 1 root root 1426 Apr 9 2013 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 9 2013 40_custom
-rwxr-xr-x 1 root root 216 Apr 9 2013 41_custom
-rw-r--r-- 1 root root 483 Apr 9 2013 README
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda6: UUID=2E43-7292 (sda2)
grub-install (GRUB) 2.00-13ubuntu3,grub-install (GRUB) 2.
chroot /mnt/boot-sav/sda6 efibootmgr -v
BootCurrent: 0008
Timeout: 2 seconds
BootOrder: 0008,0001,0002,0000,0004,0005,0006,0007
Boot0000* Windows Boot Manager HD(2,200000,b4000,92eb8564-f0da-4e41-b6a7-6903938feb6d)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0004* CD/DVD Drive BIOS(3,0,00)AMGOAMNO........o.h.p. .C.D.D.V.D.W. .S.H.-.2.1.6.B.B....................A...........................>..Gd-.;.A..MQ..L.8.R.M.T.Y.6.D.B.0.5.1.1.L.2. . . . . . ......AMBO
Boot0005* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0006* Hard Drive BIOS(2,0,00)AMGOAMNO........o.S.T.1.0.0.0.D.M.0.0.3.-.1.C.H.1.6.2....................A...........................>..Gd-.;.A..MQ..L.1.Z.5.D.N.P.N.E. . . . . . . . . . . . ......AMBO
Boot0007* Realtek PXE B03 D00 BIOS(6,0,00)AMBO
Boot0008* UEFI: hp CDDVDW SH-216BB ACPI(a0341d0,0)PCI(1f,2)03120a000100ffff0000CD-ROM(1,6168c,11c0)AMBO
chroot /mnt/boot-sav/sda6 uname -r
Kernel: 3.8.0-19-generic
Reinstall the grub-efi linux of sda6
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :0
ls /mnt/boot-sav/sda6/boot/efi/1:
ls /mnt/boot-sav/sda6/boot/efi: EFI
HP_TOOLS
screen001.bmp
SYSTEM . Please report this message to boot.repair@gmail.com
df /dev/sda2
Save and rename /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi (/mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi)
cp /mnt/boot-sav/sda6/boot/efi/EFI/ubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
df /dev/sda2
cp /mnt/boot-sav/sda6/boot/efi/EFI/ubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootx64.efi (& .grb)
df /dev/sda2
Save and rename /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi (/mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi)
cp /mnt/boot-sav/sda6/boot/efi/EFI/ubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
ls /mnt/boot-sav/sda6/boot/efi/1:
ls /mnt/boot-sav/sda6/boot/efi: EFI
HP_TOOLS
screen001.bmp
SYSTEM . Please report this message to boot.repair@gmail.com
Add /mnt/boot-sav/sda6/boot/efi efi entries in /mnt/boot-sav/sda6/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi
sda2/bkpbootx64.efi already added
sda2/bkpbootmgfw.efi already added
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BiosUpdate/CryptRSA32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BiosUpdate/CryptRSA.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BiosUpdate/HpBiosUpdate32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BiosUpdate/HpBiosUpdate.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/CryptRSA32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/CryptRSA.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/SystemDiags.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemRecovery/bootmgfw.efi
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :0
chroot /mnt/boot-sav/sda6 efibootmgr -v
BootCurrent: 0008
Timeout: 2 seconds
BootOrder: 0008,0001,0002,0000,0004,0005,0006,0007
Boot0000* Windows Boot Manager HD(2,200000,b4000,92eb8564-f0da-4e41-b6a7-6903938feb6d)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0004* CD/DVD Drive BIOS(3,0,00)AMGOAMNO........o.h.p. .C.D.D.V.D.W. .S.H.-.2.1.6.B.B....................A...........................>..Gd-.;.A..MQ..L.8.R.M.T.Y.6.D.B.0.5.1.1.L.2. . . . . . ......AMBO
Boot0005* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0006* Hard Drive BIOS(2,0,00)AMGOAMNO........o.S.T.1.0.0.0.D.M.0.0.3.-.1.C.H.1.6.2....................A...........................>..Gd-.;.A..MQ..L.1.Z.5.D.N.P.N.E. . . . . . . . . . . . ......AMBO
Boot0007* Realtek PXE B03 D00 BIOS(6,0,00)AMBO
Boot0008* UEFI: hp CDDVDW SH-216BB ACPI(a0341d0,0)PCI(1f,2)03120a000100ffff0000CD-ROM(1,6168c,11c0)AMBO
chroot /mnt/boot-sav/sda6 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.8.0-19-generic
Found initrd image: /boot/initrd.img-3.8.0-19-generic
Found Windows 8 (loader) on /dev/sda4
Found Windows Recovery Environment (loader) on /dev/sda5
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda6/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
Je redémarre, je vois le menu de grub avec tous les choix habituels et je tombe sur l'écran violet ARRRRRRRRRRRRRR DAMNED JE VAIS DEVENIR FOU §?.../%5[{ (je ne sais pas comment dessiner les injures à la capitaine Haddock)
Je redémarre, je mets un livecd dans le tirroir, je choisi la ligne pour démarrer sur Windows
puis, dans windows je redémarre le PC, j'entends le livecd qui tourne et j'arrive sur le menu d'Ubuntu installé sur le disque dur qui me demande le mot de passe utilisateur.
J'enlève le livecd du tirroir, je tape le mot de passe et j'arrive dans la session normale d'Ubuntu ??????????????????
Je viens de remarquer un truc, si je redémarre le PC sans débrancher l'alimentation, il ne redémarre pas normalement, l'écran reste noir.
Si je débranche l'alimentation ou que j'attends 1 min, alors au redémarrage, le menu de grub apparait.
Enfin, si je démarre en mettant un livecd 12.04.3 dans le tirroir, j'arrive sur le menu grub qui aboutit sur l'écran violet, je redémarre aussitôt le PC (toujours avec le livecd dans le tirroir) et j'arrive sur la session Ubuntu installée.
Pourquoi grub exige la présence du livecd 12.04.3 (et uniquement celui-la, avec les autres cela ne fonctionne pas) pour lancer la session Ubuntu installée sur le disque dur ?
Je n'ai plus d'idée, suite demain, si une âme charitable me vient en aide ....
Dernière modification par morane (Le 13/10/2013, à 23:54)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#19 Le 12/10/2013, à 12:25
- maxire
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Salut Morane,
Je compatis à tes difficultés, le problème vient peut-être de l'uefi mode HP.
Voir HP Uefi White Paper
Regarde particulièrement "firmware policies", tu y trouveras de beaux tableaux sur les modes boot permettant d'utiliser linux, plus quelques petites choses concernant des clés HP.
Personnellement, j'ai lu ce document en diagonale, le diagnostic est sans doute là.
Finalement, j'ai réussi à utiliser les noyaux 3.8 sous precise après réinstallation sans les noyaux signés.
Mais c'est une toute autre configuration.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#20 Le 12/10/2013, à 12:31
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Bonjour à tous,
J'ai mis à jour le boot-info (voir message d'hier 22h48) et j'ai vu les informations suivantes:
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
Plusieurs questions:
pourquoi le démarrage avec le livecd démarre en fait Ubuntu installé sur le disque dur (sans passer par les options de boot de grub ?
pourquoi ce démarrage n'est possible qu'avec le livecd Ubuntu 12.04.3 alors que c'est Ubuntu 13.04 qui est installé sur le disque dur ?
pourquoi un démarrage du PC (sans Livecd dans le tirroir) montre la page de démarrage grub habituel, plante pour lancer Ubuntu et démarre Windows sans problème ?
Dernière modification par morane (Le 13/10/2013, à 23:52)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#21 Le 12/10/2013, à 13:19
- maxire
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Table 2, 3ème ligne du document dont je t'ai fourni le lien, j'ai bien peur qu'il soit impossible d'installer linux en secure boot/dualboot dans ton cas.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#22 Le 12/10/2013, à 14:13
- malbo
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
morane,
Quel est le nom complet* du modèle de ton ordi ?
* par "complet", je veux dire par exemple "HP ENVY DV6-7375SF" et pas seulement "HP ENVY DV6"
Hors ligne
#23 Le 13/10/2013, à 15:08
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Bonjour à tous,
Après 24h passé à m'aérer l'esprit, je suis de retour dans le cambouis.
Malbo,
Voici les infos :
Le PC est un
HP 110 Desktop PC series
serial n° CZC32971C8
product n° E5F40EA#ABF
model n° 110-006ef
J'ai eu l'idée de démarrer sur une clef liveusb 12.04.3, en choisissant disque dur USB dans le bios comme premier perif de démarrage.
Résultat: rien à faire, l'écran reste noir
Puis je choisi disque dur/usb dans le bios comme premier perif de démarrage
Résultat: ce n'est pas le liveusb qui se lance mais la session Ubuntu 13.04 installée sur le PC (sans passer par le menu de démarrage de grub)
J'enlève la clef et j'utilise Bootrepair avec les options suivantes:
réinstaller grub
utiliser le fichier EFI standard
sauvegarder et renommer les fichiers EFI Windows
faire apparaitre le menu de démarrage
emplacement de grub sur Partition/boot/efi séparée sda2
purger Grub avant de le réinstaller
créer un rapport Bootinfo
participer aux statistiques
vérifier la connexion internet
Au fait à quoi sert l'option secure-boot de boot repair ?
Et la, lors de l'étape "sudo apt-get install -y --force-yes grub-efi linux"
J'ai le message
"impossible d'obtenir le verrou /var/lib/dpkg/lock - open (1: ressource temporairement non disponible)
Impossible de verouiller le répertoire d'administration (/var/lib/dpkg/). il est possible qu'un autre processus l'utilise."
Je fais un
sudo rm /var/lib/dpkg/lock
et cette fois je peux exécuter : sudo apt-get install -y --force-yes grub-efi linux
Le rapport de Boot repair indique:
Le démarrage de l'ordinateur a été correctement réparé.
Écrivez sur un papier l'URL suivante :
http://paste.ubuntu.com/6231204/
Si vous avez toujours des problèmes de démarrage, indiquez cette URL à :
boot.repair@gmail.com ou sur votre forum favori.
Vous pouvez maintenant redémarrer votre ordinateur.
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (1000GB) !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 13.04] sont loin du début du disque.
Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé
une partition /boot (EXT4, >200MB, en début de disque).
Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition
via l'option [Partition /boot séparée :] de [Réparateur de démarrage].
(http://doc.ubuntu-fr.org/tutoriel/partition_boot)
Je redémarre et je tombe sur le trop fameux écran violet vide
Maxire,
Merci pour la doc, je suppose que tu parles de ce paragraphe
When Secure Boot “Disable” command is sent from WMI to BIOS , the status of the Secure Boot
doesn’t change immediately. At next reboot, the physical presence must be checked to prevent malicious software attacks.
To complete the process, the customer or technician is required to type in a random four - digit verification code that is
displayed in the message generated by the BIOS
Ce qui voudrait dire que j'ai un problème de secureboot quelque part.
Dernière modification par morane (Le 13/10/2013, à 23:51)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#24 Le 13/10/2013, à 16:07
- morane
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
Suite des tests:
Je démarre le PC, je tombe sur l'écran de démarrage de grub
si je choisi Windows, celui-ci démarre
si je choisi Ubuntu, je tombe sur une page violette bloquée vide.
J'éteins le PC, j'attends 1 min et je redémarre, je tombe sur l'écran de démarrage de grub
Je ne change pas la ligne sélectionnée pour le démarrage qui est Ubuntu
Je mets aussitôt (avant la fin des 10 secondes) la clef liveusb 12.04.3 dans le slot et alors Ubuntu installé sur le PC démarre
Je lance bootrepair et je choisi la réparation automatique
Un message me signale que j'ai un buggy kernel
le rapport est http://paste.ubuntu.com/6231422
J'enlève la clef, je redémarre et comme d'hab, l'écran violet
J'éteins le PC, j'attends 1 min et je redémarre, je tombe sur l'écran de démarrage de grub
Je ne change pas la ligne sélectionnée pour le démarrage qui est Ubuntu
Je mets aussitôt (avant la fin des 10 secondes) la clef liveusb 12.04.3 dans le slot et alors Ubuntu installé sur le PC démarre
Je laisse la clef et j'utilise Bootrepair avec les options suivantes:
réinstaller grub
utiliser le fichier EFI standard
sauvegarder et renommer les fichiers EFI Windows
faire apparaitre le menu de démarrage
réparer les systèmes de fichiers
emplacement de grub sur Partition/boot/efi séparée sda2
Secureboot
purger Grub avant de le réinstaller
décommenter grub_gxmode
support disque ATA
purger les kernels puis réinstaller le dernier kernel
créer un rapport Bootinfo
participer aux statistiques
vérifier la connexion internet
Le rapport est http://paste.ubuntu.com/6231515
Je redémarre, le problème reste entier.
Bon, pour résumer:
Si le PC démarre sans le liveusb 12.04.3, le menu de grub permet de lancer windows mais bloque sur le démarrage d'Ubuntu
Si le PC démarre avec le liveusb 12.04.3 dans un slot usb, le menu de grub permet de lancer Ubuntu installé sur le PC ou windows, mais le liveusb ne se lance pas.
Dernière modification par morane (Le 13/10/2013, à 23:50)
Ubuntu 18.04 et 20.04 MATE installés en dual boot avec Seven et Win 8 sur plusieurs PC différents
Un serveur raid avec Ubuntu 18.04
Bricole sur Ubuntu depuis la version 7.04
Hors ligne
#25 Le 13/10/2013, à 17:21
- maxire
Re : win8/ubuntu 12.04.3 sur HP ubuntu redémarre pas (partiellement résolu)
En fait je pense surtout au tableau numéro 2 présentant les différentes combinaisons possibles de démarrage avec le secure boot activé ou non.
Boot Mode\Secure Boot Disable Enable
-------------------------------------------------------------------------------------------------------------------------
Legacy Legacy OS: XP, Vista, Windows 7, Invalid
Linux
UEFI Hybrid Legacy OS: XP, Vista, Windows 7, Invalid
Linux
UEFI Native Linux, Win8 with Native UEFI but Win8
no secure boot
J'interpréterais la dernière ligne, qui correspond à ton cas, de la manière suivante :
En Secure Boot il n'est possible de démarrer que Win8.
Il existerait 2 versions de win8, une sécurisée, l'autre non.
Donc il serait possible de démarrer linux en désactivant le secure boot à condition d'utiliser un Win8 non sécurisé (existe-t-il toujours ?).
Comme tu as un win8 sécurisé, pour avoir un multiboot tu dois passer en secure boot et je me demande si l'uefi de HP ne part pas alors en vrille, vrille évitée, en partie, lorsque tu insères le live-cd ou un disque externe.
Tout cela n'est que supposition, je me trompe peut-être, je ne connais pas Windows 8 et je n'ai aucune envie de connaître.
Peut-être serait-il intéressant de te tourner vers le service après-vente de HP pour savoir ce qu'ils en pensent ?
Dernière modification par maxire (Le 13/10/2013, à 17:46)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne