Ubuntu-fr

commentallezvous

linuxsampler probleme d'installation (recursive ??). os 13.10

bonjour
çà pas l'air de marcher , erreur récursive ?
je m'inquiete du message " make  all-recursive "  ???!!!!
lorsque je lance qsampler j'ai ce message :

11:27:34.803 Client connecting...
11:27:34.853 Server is starting...
11:27:34.858 linuxsampler
11:27:34.874 Could not start server. Sorry.
lscp_client_create: cmd: connect: Connexion refusée
11:27:56.170 Server was stopped with exit status 0.

lors de la compilation de linuxsampler , des messages d'erreur !!!!

checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking whether byte ordering is bigendian... no
checking host system type... (cached) i686-pc-linux-gnu
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether x86 architecture... yes
checking for mmsystem.h... no
checking whether UNIX98 compatible... yes
checking features.h usability... yes
checking features.h presence... yes
checking for features.h... yes
checking for the pthreads library -lpthreads... no
checking whether pthreads work without any flags... no
checking whether pthreads work with -Kthread... no
checking whether pthreads work with -kthread... no
checking for the pthreads library -llthread... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking if more special flags are required for pthreads... no
checking for NPTL bug... no
checking uuid/uuid.h usability... no
checking uuid/uuid.h presence... no
checking for uuid/uuid.h... no
checking for library containing uuid_generate... no
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for main in -lasound... yes
checking Alsa version... 1.0.27
checking for JACK... yes
checking for jack_client_name_size... yes
checking for jack_client_open... yes
checking jack/midiport.h usability... yes
checking jack/midiport.h presence... yes
checking for jack/midiport.h... yes
checking for jack_midi_get_event_count... yes
checking for artsc-config... no
checking for ARTS artsc - version >= 0.9.5... no
*** The artsc-config script installed by ARTS could not be found
*** If ARTS was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the ARTS_CONFIG environment variable to the
*** full path to artsc-config.
checking for ASIO headerfile: ./ASIOSDK2/common/asio.h ....no
checking MidiShare.h usability... no
checking MidiShare.h presence... no
checking for MidiShare.h... no
checking CoreMIDI/CoreMIDI.h usability... no
checking CoreMIDI/CoreMIDI.h presence... no
checking for CoreMIDI/CoreMIDI.h... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking for mmsystem.h... (cached) no
checking dssi.h usability... no
checking dssi.h presence... no
checking for dssi.h... no
checking for LV2... no
checking lv2.h usability... no
checking lv2.h presence... no
checking for lv2.h... no
checking AudioUnit/AudioUnit.h usability... no
checking AudioUnit/AudioUnit.h presence... no
checking for AudioUnit/AudioUnit.h... no
checking for GIG... yes
yes, found libgig 3.3.0
checking for SQLITE3... no
*** Required sqlite version not found!
*** You need to have sqlite version 3.3 or higher
*** for instruments database support to be enabled.
*** Support for instruments DB will be disabled!
benchmarking for the best (signed) triangular oscillator algorithm... integer math using abs()
benchmarking for the best (unsigned) triangular oscillator algorithm... integer math using abs()
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking dependency style of g++... gcc3
checking for stdlib.h... (cached) yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating man/Makefile
config.status: creating man/linuxsampler.1
config.status: creating src/Makefile
config.status: creating src/db/Makefile
config.status: creating src/network/Makefile
config.status: creating src/engines/Makefile
config.status: creating src/engines/gig/Makefile
config.status: creating src/engines/common/Makefile
config.status: creating src/effects/Makefile
config.status: creating src/common/Makefile
config.status: creating src/testcases/Makefile
config.status: creating src/drivers/Makefile
config.status: creating src/drivers/audio/Makefile
config.status: creating src/drivers/midi/Makefile
config.status: creating src/plugins/Makefile
config.status: creating src/hostplugins/Makefile
config.status: creating src/hostplugins/dssi/Makefile
config.status: creating src/hostplugins/lv2/Makefile
config.status: creating src/hostplugins/vst/Makefile
config.status: creating src/hostplugins/au/Makefile
config.status: creating linuxsampler.spec
config.status: creating debian/Makefile
config.status: creating Artwork/Makefile
config.status: creating scripts/Makefile
config.status: creating osx/Makefile
config.status: creating osx/linuxsampler.xcodeproj/Makefile
config.status: creating Documentation/Makefile
config.status: creating Documentation/Engines/Makefile
config.status: creating Documentation/Engines/gig/Makefile
config.status: creating linuxsampler.pc
config.status: creating Doxyfile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands

#####################################################################
# LinuxSampler Configuration                                        #
#-------------------------------------------------------------------#
# Release Version: 1.0.0
# LSCP Version: 1.4
#-------------------------------------------------------------------
# Assembly Optimizations: yes
# Development Mode: no
# Debug Level: 1
# Use Exceptions in RT Context: no
# Preload Samples: 32768
# Maximum Pitch: 4 (octaves)
# Maximum Events: 1024
# Envelope Bottom Level: 0.001 (linear)
# Envelope Minimum Release Time: 0.0025 s
# Streams to be refilled per Disk Thread Cycle: 4
# Minimum Stream Refill Size: 1024
# Maximum Stream Refill Size: 65536
# Stream Size: 262144
# Default Maximum Disk Streams: 90
# Default Maximum Voices: 64
# Default Subfragment Size: 32
# Default Global Volume Attenuation: 0.35
# Voice Stealing Algorithm: oldestvoiceonkey
# Signed Triangular Oscillator Algorithm: intmathabs
# Unsigned Triangular Oscillator Algorithm: intmathabs
# SysEx Buffer Size: 2048 Byte
# Min. Portamento Time: 0.1 s
# Max. Portamento Time: 32 s
# Default Portamento Time: 1 s
# Force Filter Usage: no
# Filter Cutoff Minimum: 100.0 Hz
# Filter Cutoff Maximum: 10000.0 Hz
# Override Filter Cutoff Controller: no
# Override Filter Resonance Controller: no
# Override Filter Type: no
# Assert GS SysEx Checksum: no
# Process Muted Channels: no
# Process All-Notes-Off MIDI message: yes
# Apply global volume SysEx by MIDI port: no
# Interpolate Volume: yes
# Instruments database support: no
# Plugin Path: /usr/local/lib/linuxsampler/plugins
#-------------------------------------------------------------------
# MIDI Input Drivers:
# ALSA: yes, JACK: yes, CoreMIDI: no, MME: no, MidiShare: no
#-------------------------------------------------------------------
# Audio Output Drivers:
# ALSA: yes, JACK: yes, ARTS: no, CoreAudio: no, ASIO: no
#-------------------------------------------------------------------
# Building sampler as plugin for following host standards:
# DSSI: no, LV2: no, VST: no, AU: no
#-------------------------------------------------------------------#
# Read './configure --help' or file 'configure.in' for details.     #
#####################################################################

Good. Now type 'make' to compile, followed by 'make install' as root.

patricia@patricia-desktop:~/Téléchargements/linuxsampler-1.0.0$ make
make  all-recursive
make[1]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0 »
Making all in man
make[2]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/man »
make[2]: Rien à faire pour « all ».
make[2]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/man »
Making all in src
make[2]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src »
Making all in db
make[3]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src/db »
make[3]: Rien à faire pour « all ».
make[3]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src/db »
Making all in network
make[3]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src/network »
if /bin/bash ../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../..      -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpparser.lo -MD -MP -MF ".deps/lscpparser.Tpo" -c -o lscpparser.lo lscpparser.cpp; \
	then mv -f ".deps/lscpparser.Tpo" ".deps/lscpparser.Plo"; else rm -f ".deps/lscpparser.Tpo"; exit 1; fi
mkdir .libs
 g++ -DHAVE_CONFIG_H -I. -I. -I../.. -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpparser.lo -MD -MP -MF .deps/lscpparser.Tpo -c lscpparser.cpp  -fPIC -DPIC -o .libs/lscpparser.o
 g++ -DHAVE_CONFIG_H -I. -I. -I../.. -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpparser.lo -MD -MP -MF .deps/lscpparser.Tpo -c lscpparser.cpp -o lscpparser.o >/dev/null 2>&1
if /bin/bash ../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../..      -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpserver.lo -MD -MP -MF ".deps/lscpserver.Tpo" -c -o lscpserver.lo lscpserver.cpp; \
	then mv -f ".deps/lscpserver.Tpo" ".deps/lscpserver.Plo"; else rm -f ".deps/lscpserver.Tpo"; exit 1; fi
 g++ -DHAVE_CONFIG_H -I. -I. -I../.. -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpserver.lo -MD -MP -MF .deps/lscpserver.Tpo -c lscpserver.cpp  -fPIC -DPIC -o .libs/lscpserver.o
In file included from lscpparser.h:39:0,
                 from lscpserver.h:45,
                 from lscpserver.cpp:28:
lscpserver.cpp: In member function ‘String LinuxSampler::LSCPServer::GetAudioOutputChannelInfo(uint, uint)’:
lscpserver.cpp:1520:96: warning: too many arguments for format [-Wformat-extra-args]
     dmsg(2,("LSCPServer: GetAudioOutputChannelInfo(DeviceId=%d,ChannelId)\n",DeviceId,ChannelId));
                                                                                                ^
../common/global_private.h:39:76: note: in definition of macro ‘dmsg’
 #  define dmsg(debuglevel,x) if (CONFIG_DEBUG_LEVEL >= debuglevel) {printf x; fflush(stdout);}
                                                                            ^
 g++ -DHAVE_CONFIG_H -I. -I. -I../.. -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpserver.lo -MD -MP -MF .deps/lscpserver.Tpo -c lscpserver.cpp -o lscpserver.o >/dev/null 2>&1
if /bin/bash ../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../..      -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpresultset.lo -MD -MP -MF ".deps/lscpresultset.Tpo" -c -o lscpresultset.lo lscpresultset.cpp; \
	then mv -f ".deps/lscpresultset.Tpo" ".deps/lscpresultset.Plo"; else rm -f ".deps/lscpresultset.Tpo"; exit 1; fi
 g++ -DHAVE_CONFIG_H -I. -I. -I../.. -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpresultset.lo -MD -MP -MF .deps/lscpresultset.Tpo -c lscpresultset.cpp  -fPIC -DPIC -o .libs/lscpresultset.o
 g++ -DHAVE_CONFIG_H -I. -I. -I../.. -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpresultset.lo -MD -MP -MF .deps/lscpresultset.Tpo -c lscpresultset.cpp -o lscpresultset.o >/dev/null 2>&1
if /bin/bash ../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../..      -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpevent.lo -MD -MP -MF ".deps/lscpevent.Tpo" -c -o lscpevent.lo lscpevent.cpp; \
	then mv -f ".deps/lscpevent.Tpo" ".deps/lscpevent.Plo"; else rm -f ".deps/lscpevent.Tpo"; exit 1; fi
 g++ -DHAVE_CONFIG_H -I. -I. -I../.. -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpevent.lo -MD -MP -MF .deps/lscpevent.Tpo -c lscpevent.cpp  -fPIC -DPIC -o .libs/lscpevent.o
 g++ -DHAVE_CONFIG_H -I. -I. -I../.. -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread -MT lscpevent.lo -MD -MP -MF .deps/lscpevent.Tpo -c lscpevent.cpp -o lscpevent.o >/dev/null 2>&1
/bin/bash ../../libtool --mode=link g++ -Wreturn-type -ffast-math -march=i686 -g -O2 -pthread   -o liblinuxsamplernetwork.la   lscpparser.lo lscpserver.lo lscpresultset.lo lscpevent.lo  
ar cru .libs/liblinuxsamplernetwork.a .libs/lscpparser.o .libs/lscpserver.o .libs/lscpresultset.o .libs/lscpevent.o
ranlib .libs/liblinuxsamplernetwork.a
creating liblinuxsamplernetwork.la
(cd .libs && rm -f liblinuxsamplernetwork.la && ln -s ../liblinuxsamplernetwork.la liblinuxsamplernetwork.la)
make[3]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src/network »
Making all in engines
make[3]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src/engines »
Making all in gig
make[4]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src/engines/gig »
if /bin/bash ../../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../../..     -Wreturn-type -ffast-math -g -O2 -pthread -MT DiskThread.lo -MD -MP -MF ".deps/DiskThread.Tpo" -c -o DiskThread.lo DiskThread.cpp; \
	then mv -f ".deps/DiskThread.Tpo" ".deps/DiskThread.Plo"; else rm -f ".deps/DiskThread.Tpo"; exit 1; fi
mkdir .libs
 g++ -DHAVE_CONFIG_H -I. -I. -I../../.. -Wreturn-type -ffast-math -g -O2 -pthread -MT DiskThread.lo -MD -MP -MF .deps/DiskThread.Tpo -c DiskThread.cpp  -fPIC -DPIC -o .libs/DiskThread.o
 g++ -DHAVE_CONFIG_H -I. -I. -I../../.. -Wreturn-type -ffast-math -g -O2 -pthread -MT DiskThread.lo -MD -MP -MF .deps/DiskThread.Tpo -c DiskThread.cpp -o DiskThread.o >/dev/null 2>&1
if /bin/bash ../../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../../..     -Wreturn-type -ffast-math -g -O2 -pthread -MT EGADSR.lo -MD -MP -MF ".deps/EGADSR.Tpo" -c -o EGADSR.lo EGADSR.cpp; \
	then mv -f ".deps/EGADSR.Tpo" ".deps/EGADSR.Plo"; else rm -f ".deps/EGADSR.Tpo"; exit 1; fi
 g++ -DHAVE_CONFIG_H -I. -I. -I../../.. -Wreturn-type -ffast-math -g -O2 -pthread -MT EGADSR.lo -MD -MP -MF .deps/EGADSR.Tpo -c EGADSR.cpp  -fPIC -DPIC -o .libs/EGADSR.o
 g++ -DHAVE_CONFIG_H -I. -I. -I../../.. -Wreturn-type -ffast-math -g -O2 -pthread -MT EGADSR.lo -MD -MP -MF .deps/EGADSR.Tpo -c EGADSR.cpp -o EGADSR.o >/dev/null 2>&1
if /bin/bash ../../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../../..     -Wreturn-type -ffast-math -g -O2 -pthread -MT EGDecay.lo -MD -MP -MF ".deps/EGDecay.Tpo" -c -o EGDecay.lo EGDecay.cpp; \
	then mv -f ".deps/EGDecay.Tpo" ".deps/EGDecay.Plo"; else rm -f ".deps/EGDecay.Tpo"; exit 1; fi
 g++ -DHAVE_CONFIG_H -I. -I. -I../../.. -Wreturn-type -ffast-math -g -O2 -pthread -MT EGDecay.lo -MD -MP -MF .deps/EGDecay.Tpo -c EGDecay.cpp  -fPIC -DPIC -o .libs/EGDecay.o
In file included from ../../common/RTMath.h:29:0,
                 from EGDecay.h:28,
                 from EGDecay.cpp:24:
EGDecay.cpp: In member function ‘void LinuxSampler::gig::EGDecay::trigger(float, float, unsigned int)’:
EGDecay.cpp:40:61: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘double’ [-Wformat=]
         dmsg(4,("Depth=%d, DecayTime=%f\n", Depth, DecayTime));
                                                             ^
../../common/global_private.h:39:76: note: in definition of macro ‘dmsg’
 #  define dmsg(debuglevel,x) if (CONFIG_DEBUG_LEVEL >= debuglevel) {printf x; fflush(stdout);}
                                                                            ^
 g++ -DHAVE_CONFIG_H -I. -I. -I../../.. -Wreturn-type -ffast-math -g -O2 -pthread -MT EGDecay.lo -MD -MP -MF .deps/EGDecay.Tpo -c EGDecay.cpp -o EGDecay.o >/dev/null 2>&1
if /bin/bash ../../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../../..     -Wreturn-type -ffast-math -g -O2 -pthread -MT Engine.lo -MD -MP -MF ".deps/Engine.Tpo" -c -o Engine.lo Engine.cpp; \
	then mv -f ".deps/Engine.Tpo" ".deps/Engine.Plo"; else rm -f ".deps/Engine.Tpo"; exit 1; fi
 g++ -DHAVE_CONFIG_H -I. -I. -I../../.. -Wreturn-type -ffast-math -g -O2 -pthread -MT Engine.lo -MD -MP -MF .deps/Engine.Tpo -c Engine.cpp  -fPIC -DPIC -o .libs/Engine.o
In file included from DiskThread.h:27:0,
                 from Engine.cpp:25:
Engine.cpp: In member function ‘void LinuxSampler::gig::Engine::Suspend(gig::Region*)’:
Engine.cpp:252:66: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘gig::Region*’ [-Wformat=]
         dmsg(2,("gig::Engine: Suspending Region %x ...\n",pRegion));
                                                                  ^
../../common/global_private.h:39:76: note: in definition of macro ‘dmsg’
 #  define dmsg(debuglevel,x) if (CONFIG_DEBUG_LEVEL >= debuglevel) {printf x; fflush(stdout);}
                                                                            ^
Engine.cpp:258:60: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘gig::Region*’ [-Wformat=]
         dmsg(2,("gig::Engine: Region %x suspended.",pRegion));
                                                            ^
../../common/global_private.h:39:76: note: in definition of macro ‘dmsg’
 #  define dmsg(debuglevel,x) if (CONFIG_DEBUG_LEVEL >= debuglevel) {printf x; fflush(stdout);}
                                                                            ^
Engine.cpp: In member function ‘void LinuxSampler::gig::Engine::Resume(gig::Region*)’:
Engine.cpp:268:64: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘gig::Region*’ [-Wformat=]
         dmsg(2,("gig::Engine: Resuming Region %x ...\n",pRegion));
                                                                ^
../../common/global_private.h:39:76: note: in definition of macro ‘dmsg’
 #  define dmsg(debuglevel,x) if (CONFIG_DEBUG_LEVEL >= debuglevel) {printf x; fflush(stdout);}
                                                                            ^
Engine.cpp:274:60: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘gig::Region*’ [-Wformat=]
         dmsg(2,("gig::Engine: Region %x resumed.\n",pRegion));
                                                            ^
../../common/global_private.h:39:76: note: in definition of macro ‘dmsg’
 #  define dmsg(debuglevel,x) if (CONFIG_DEBUG_LEVEL >= debuglevel) {printf x; fflush(stdout);}
                                                                            ^
In file included from Voice.h:32:0,
                 from DiskThread.h:35,
                 from Engine.cpp:25:
../../common/Pool.h: In instantiation of ‘RTList<T>::Iterator RTList<T>::allocAppend() [with T = LinuxSampler::gig::Voice; RTList<T>::Iterator = RTListBase<LinuxSampler::gig::Voice>::_Iterator<LinuxSampler::gig::Voice>]’:
Engine.cpp:118:74:   required from here
../../common/Pool.h:396:27: error: ‘append’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
             append(element);
                           ^
../../common/Pool.h:396:27: note: declarations in dependent base ‘RTListBase<LinuxSampler::gig::Voice>’ are not found by unqualified lookup
../../common/Pool.h:396:27: note: use ‘this->append’ instead
../../common/Pool.h: In instantiation of ‘RTList<T>::Iterator RTList<T>::allocAppend() [with T = gig::Region*; RTList<T>::Iterator = RTListBase<gig::Region*>::_Iterator<gig::Region*>]’:
Engine.cpp:466:87:   required from here
../../common/Pool.h:396:27: error: ‘append’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
../../common/Pool.h:396:27: note: declarations in dependent base ‘RTListBase<gig::Region*>’ are not found by unqualified lookup
../../common/Pool.h:396:27: note: use ‘this->append’ instead
../../common/Pool.h: In instantiation of ‘RTList<T>::Iterator RTList<T>::allocAppend() [with T = LinuxSampler::Event; RTList<T>::Iterator = RTListBase<LinuxSampler::Event>::_Iterator<LinuxSampler::Event>]’:
Engine.cpp:568:41:   required from here
../../common/Pool.h:396:27: error: ‘append’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
../../common/Pool.h:396:27: note: declarations in dependent base ‘RTListBase<LinuxSampler::Event>’ are not found by unqualified lookup
../../common/Pool.h:396:27: note: use ‘this->append’ instead
../../common/Pool.h: In instantiation of ‘RTList<T>::Iterator RTList<T>::allocAppend() [with T = gig::DimensionRegion*; RTList<T>::Iterator = RTListBase<gig::DimensionRegion*>::_Iterator<gig::DimensionRegion*>]’:
Engine.cpp:797:73:   required from here
../../common/Pool.h:396:27: error: ‘append’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
../../common/Pool.h:396:27: note: declarations in dependent base ‘RTListBase<gig::DimensionRegion*>’ are not found by unqualified lookup
../../common/Pool.h:396:27: note: use ‘this->append’ instead
../../common/Pool.h: In instantiation of ‘RTList<T>::Iterator RTList<T>::allocAppend() [with T = unsigned int; RTList<T>::Iterator = RTListBase<unsigned int>::_Iterator<unsigned int>]’:
Engine.cpp:1398:77:   required from here
../../common/Pool.h:396:27: error: ‘append’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
../../common/Pool.h:396:27: note: declarations in dependent base ‘RTListBase<unsigned int>’ are not found by unqualified lookup
../../common/Pool.h:396:27: note: use ‘this->append’ instead
make[4]: *** [Engine.lo] Erreur 1
make[4]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src/engines/gig »
make[3]: *** [all-recursive] Erreur 1
make[3]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src/engines »
make[2]: *** [all-recursive] Erreur 1
make[2]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/src »
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0 »
make: *** [all] Erreur 2
patricia@patricia-desktop:~/Téléchargements/linuxsampler-1.0.0$ make install
Making install in man
make[1]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/man »
make[2]: entrant dans le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/man »
make[2]: Rien à faire pour « install-exec-am ».
test -z "/usr/local/share/man/man1" || mkdir -p -- . "/usr/local/share/man/man1"
 /usr/bin/install -c -m 644 './linuxsampler.1' '/usr/local/share/man/man1/linuxsampler.1'
/usr/bin/install: impossible de supprimer «/usr/local/share/man/man1/linuxsampler.1»: Permission non accordée
make[2]: *** [install-man1] Erreur 1
make[2]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/man »
make[1]: *** [install-am] Erreur 2
make[1]: quittant le répertoire « /home/patricia/Téléchargements/linuxsampler-1.0.0/man »
make: *** [install-recursive] Erreur 1
patricia@patricia-desktop:~/Téléchargements/linuxsampler-1.0.0$ 

Dernière modification par commentallezvous (Le 13/10/2013, à 11:35)

mjdon

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

Pourquoi ne pas l'installer à partir du ppa comme indiqué dans http://doc.ubuntu-fr.org/linuxsampler?

Si tu as une bonne raison de le compiler toi même, comment t'y prends tu?

commentallezvous

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

le ppa ne marche pas pour ubuntu 13.10 , ou alors j'ai raté une étape.

sinon j'ai suivi à la lettre l'installation preconisé par linuxsampler :

Basic Installation
==================

   These are generic installation instructions.

   The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation.  It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions.  Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').

   If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release.  If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.

   The file `configure.in' is used to create `configure' by a program
called `autoconf'.  You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.

The simplest way to compile this package is:

  1. `cd' to the directory containing the package's source code and type
     `./configure' to configure the package for your system.  If you're
     using `csh' on an old version of System V, you might need to type
     `sh ./configure' instead to prevent `csh' from trying to execute
     `configure' itself.

     Running `configure' takes a while.  While running, it prints some
     messages telling which features it is checking for.

  2. Type `make' to compile the package.

  3. Type `make install' to install the programs and any data files and
     documentation.

  4. You can remove the program binaries and object files from the
     source code directory by typing `make clean'.  

Compilers and Options
=====================

   Some systems require unusual options for compilation or linking that
the `configure' script does not know about.  You can give `configure'
initial values for variables by setting them in the environment.  Using
a Bourne-compatible shell, you can do that on the command line like
this:
     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure

Or on systems that have the `env' program, you can do it like this:
     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure

Compiling For Multiple Architectures
====================================

   You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory.  To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'.  `cd' to the
directory where you want the object files and executables to go and run
the `configure' script.  `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.

   If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory.  After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.

Installation Names
==================

   By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc.  You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.

   You can specify separate installation prefixes for
architecture-specific files and architecture-independent files.  If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.

   If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features
=================

   Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System).  The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.

   For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.

Specifying the System Type
==========================

   There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on.  Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option.  TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
     CPU-COMPANY-SYSTEM

See the file `config.sub' for the possible values of each field.  If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.

   If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.

Sharing Defaults
================

   If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists.  Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.

Operation Controls
==================

   `configure' recognizes the following options to control how it
operates.

`--cache-file=FILE'
     Use and save the results of the tests in FILE instead of
     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
     debugging `configure'.

`--help'
     Print a summary of the options to `configure', and exit.

`--quiet'
`--silent'
`-q'
     Do not print messages saying which checks are being made.

`--srcdir=DIR'
     Look for the package's source code in directory DIR.  Usually
     `configure' can determine that directory automatically.

`--version'
     Print the version of Autoconf used to generate the `configure'
     script, and exit.

`configure' also accepts some other, not widely useful, options.

mjdon

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

le ppa ne marche pas pour ubuntu 13.10 , ou alors j'ai raté une étape.

Ok, c'est une bonne raison .

Est ce que si tu suit les instruction de cette page: http://doc.ubuntu-fr.org/linuxsampler ça marche mieux?

Sinon j'essayerais chez moi.

commentallezvous

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

le ppa ne marche pas pour ubuntu 13.10 , ou alors j'ai raté une étape.

Ok, c'est une bonne raison .

Est ce que si tu suit les instruction de cette page: http://doc.ubuntu-fr.org/linuxsampler ça marche mieux?

Sinon j'essayerais chez moi.

oui , sauf que lorsque l'on clique sur le lien des soft du ppa , il n'y a pas tous les soft , notamment linuxsampler.
ce ppa doit être pour une ancienne distribution ubuntu; je pense quelle est maintenant obsolète.

mjdon

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

Je voulais dire est ce que tu as essayé les instructions de la doc pour compiler ? Tu as peut être des dépendances manquantes, ce genre de choses...

bishop

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

Salut commentallezvous !

Tu peux aussi essayer, à tout hasard, un autre PPA.
Il y a un PPA pour Ubuntu Raring qui propose LinuxSampler. Bien souvent, d'une version Ubuntu à la suivante, il n'y a pas de problème de dépendances... (bien souvent... mais pas tout le temps).
Tu essaies et si ça ne fonctionne pas tu supprimes le PPA et tu remets à jour tes dépôts.

Vu que c'est un PPA pour Raring ajoute-le à ton sources.list :

sudo gedit /etc/apt/sources.list

Tu ajoutes :

deb http://ppa.launchpad.net/jsevi83/audio/ubuntu raring main
deb-src http://ppa.launchpad.net/jsevi83/audio/ubuntu raring main

Tu enregistres et tu fermes.

Tu installes la clé publique :

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys CE2DB277

Tu mets à jour :

sudo apt-get update && sudo apt-get upgrade

Tu installes LinuxSampler :

sudo apt-get install linuxsampler

Dernière modification par bishop (Le 13/10/2013, à 12:56)

---

La plus grande surprise que puisse faire un con c'est de faire une pause.

commentallezvous

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

Je voulais dire est ce que tu as essayé les instructions de la doc pour compiler ? Tu as peut être des dépendances manquantes, ce genre de choses...

non, comme il parlait de karmic....
par contre  je vais l'essayer , normalement s' il détecte des fichiers plus récent , Mr Ubuntu prévient ? ; que je ne me retrouve pas avec des doublons et autres surcouches , car sur le clic je vois installation d'un système debian de base ???!!!! + systeme de construction modulaire pour paquet debian...
je ne voudrai pas transformer mon PC en auberge espagnole !!!!
surtout que mon système marche super bien ; et qu'une installation en home studio c'est hyper pointue , je ne voudrai pas faire n'importe quoi aux risques de tous planter.

Dernière modification par commentallezvous (Le 13/10/2013, à 17:16)

commentallezvous

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

merci bishop , linuxsampler installé )))) sauf que maintenant c'est qsampler qui fait des siennes ;
au lancement de qsampler j'ai le message "l'application qsampler a quitté de façon inattendue" , j'ai envoyé le rapport d'erreur.
çà ne doit pas être  grand chose, vais relancer l'application au cas où.
par contre il s'est bien connecté au server linuxsampler , je l'ai vu aux messages qui défilent . (brièvement , car çà va vite) un petit bug ?
est-ce parce que j'utilise saucy ?
ou est stocké le rapport d'erreur de qsampler ?

JACK Audio Connection Kit - Qt GUI Interface Version: 0.3.10
qsampler 0.2.2-5
qsampler crashed with SIGSEGV in QAbstractltemView::currentindex()  ????

Dernière modification par commentallezvous (Le 13/10/2013, à 16:41)

commentallezvous

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

pfff c'est galere , )))

en CLI j'arrive a lancer linuxsampler :

patricia@patricia-desktop:~$ linuxsampler
LinuxSampler 1.0.0.svn20
Copyright (C) 2003,2004 by Benno Senoner and Christian Schoenebeck
Copyright (C) 2005-2013 Christian Schoenebeck
Detected features: MMX SSE SSE2
Automatic Stacktrace: Off
Creating Sampler...OK
Registered sampler engines: 'GIG','SF2','SFZ'
Registered MIDI input drivers: ALSA,JACK
Registered audio output drivers: ALSA,JACK
Loading instrument editor plugins...OK
Registered instrument editors: 
Registered internal effect systems: LADSPA
Registered internal effects: 175
Starting LSCP network server (0.0.0.0:8888)...OK
LinuxSampler initialization completed. :-)

puisque avec qsampler çà bug , j"aimerai installer fantasia ,  comment faire ?
j'ai installé open JRE 7 et JDK et ant

j'ai suivi la méthode expliquée dans linuxmao mais je ne vois pas le fantasia.jar dans le répertoire de jsampler 0.9 !!!!
j'ai ce message :

patricia@patricia-desktop:~/JSampler-0.9$ ant build-fantasia
Unable to locate tools.jar. Expected to find it in /usr/lib/jvm/java-7-openjdk-i386/lib/tools.jar
Buildfile: /home/patricia/JSampler-0.9/build.xml

clean-fantasia:

build-manifest:

build-fantasia:
    [unjar] Expanding: /home/patricia/JSampler-0.9/lib/required/jlscp.jar into /home/patricia/JSampler-0.9/dist/build
    [unjar] Expanding: /home/patricia/JSampler-0.9/lib/required/juife.jar into /home/patricia/JSampler-0.9/dist/build
    [unjar] Expanding: /home/patricia/JSampler-0.9/lib/required/substance.jar into /home/patricia/JSampler-0.9/dist/build
    [unjar] Expanding: /home/patricia/JSampler-0.9/lib/required/swingx.jar into /home/patricia/JSampler-0.9/dist/build
    [javac] /home/patricia/JSampler-0.9/build.xml:99: warning: 'includeantruntime' was not set, defaulting to build.sysclasspath=last; set to false for repeatable builds

BUILD FAILED
/home/patricia/JSampler-0.9/build.xml:99: Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK.
It is currently set to "/usr/lib/jvm/java-7-openjdk-i386/jre"

Total time: 3 seconds
patricia@patricia-desktop:~/JSampler-0.9$ 

java installé

patricia@patricia-desktop:~$ java -version
java version "1.7.0_25"
OpenJDK Runtime Environment (IcedTea 2.3.12) (7u25-2.3.12-4ubuntu3)
OpenJDK Client VM (build 23.7-b01, mixed mode, sharing)
patricia@patricia-desktop:~$ 

c'est ok ouf!!!!!

patricia@patricia-desktop:~/JSampler-0.9$ ant build-fantasia
Buildfile: /home/patricia/JSampler-0.9/build.xml

clean-fantasia:

build-manifest:

build-fantasia:
    [unjar] Expanding: /home/patricia/JSampler-0.9/lib/required/jlscp.jar into /home/patricia/JSampler-0.9/dist/build
    [unjar] Expanding: /home/patricia/JSampler-0.9/lib/required/juife.jar into /home/patricia/JSampler-0.9/dist/build
    [unjar] Expanding: /home/patricia/JSampler-0.9/lib/required/substance.jar into /home/patricia/JSampler-0.9/dist/build
    [unjar] Expanding: /home/patricia/JSampler-0.9/lib/required/swingx.jar into /home/patricia/JSampler-0.9/dist/build
    [javac] /home/patricia/JSampler-0.9/build.xml:99: warning: 'includeantruntime' was not set, defaulting to build.sysclasspath=last; set to false for repeatable builds
    [javac] Compiling 222 source files to /home/patricia/JSampler-0.9/dist/build
    [javac] /home/patricia/JSampler-0.9/src/org/jsampler/view/fantasia/basic/PixmapPane.java:42: warning: Paint9Painter is internal proprietary API and may be removed in a future release
    [javac] 	private static Paint9Painter paint9Painter = new Paint9Painter(1);
    [javac] 	               ^
    [javac] /home/patricia/JSampler-0.9/src/org/jsampler/view/fantasia/basic/PixmapPane.java:42: warning: Paint9Painter is internal proprietary API and may be removed in a future release
    [javac] 	private static Paint9Painter paint9Painter = new Paint9Painter(1);
    [javac] 	                                                 ^
    [javac] /home/patricia/JSampler-0.9/src/org/jsampler/view/fantasia/basic/PixmapPane.java:78: warning: Paint9Painter is internal proprietary API and may be removed in a future release
    [javac] 			Paint9Painter.PaintType.PAINT9_STRETCH,
    [javac] 			^
    [javac] /home/patricia/JSampler-0.9/src/org/jsampler/view/fantasia/basic/PixmapPane.java:79: warning: Paint9Painter is internal proprietary API and may be removed in a future release
    [javac] 			Paint9Painter.PAINT_ALL
    [javac] 			^
    [javac] /home/patricia/JSampler-0.9/src/org/jsampler/view/fantasia/AudioDevicePane.java:31: warning: Paint9Painter is internal proprietary API and may be removed in a future release
    [javac] import java.awt.event.ItemListener;
    [javac]  ^
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 5 warnings
     [copy] Copying 5 files to /home/patricia/JSampler-0.9/dist/build/org/jsampler/langprops
     [copy] Copying 5 files to /home/patricia/JSampler-0.9/dist/build/org/jsampler/view/std/langprops
     [copy] Copying 5 files to /home/patricia/JSampler-0.9/dist/build/org/jsampler/view/fantasia/langprops
     [copy] Copying 3 files to /home/patricia/JSampler-0.9/dist/build/licenses
     [copy] Copying 109 files to /home/patricia/JSampler-0.9/dist/build/org/jsampler/view/fantasia/res
      [jar] Building jar: /home/patricia/JSampler-0.9/dist/Fantasia-0.9.jar
   [delete] Deleting directory /home/patricia/JSampler-0.9/dist/build

BUILD SUCCESSFUL
Total time: 15 seconds
patricia@patricia-desktop:~/JSampler-0.9$ 

pas du tout stable linuxsampler :

LSCPServer: Client connection established on socket:8.
LSCPServer: Client connection established on socket:9.
Erreur de segmentation (core dumped)
patricia@patricia-desktop:~$ 

Dernière modification par commentallezvous (Le 13/10/2013, à 23:54)

bishop

Re : linuxsampler probleme d'installation (recursive ??). os 13.10

Salut commentallezvous !
Je peux pas t'aider plus que ça pour le moment.
Je n'ai plus de connexion internet (en rade depuis trois semaines) et je ne peux utiliser mon ordi. J'utilise un portable avec une connexion hotspot qui rame et je ne peux rien installer et donc rien tester.

C'est vrai aussi que tu ne choisis pas la facilité en utilisant la version en développement de Ubuntu... Saucy Salamander 13.10. Cette version n'est pas encore stabilisée et la plupart des softs ne sont pas adaptés ou optimisés pour cette version (même si la sortie est prévue dans trois jours).

À plus...

Dernière modification par bishop (Le 14/10/2013, à 14:21)

---

La plus grande surprise que puisse faire un con c'est de faire une pause.