[résolu] NVidia GeForce 8400M GS - 640x480px !

Daddo · Le 15/08/2007, à 02:30

Bonjour,
sur un DELL Inspiron 1720, j'essaie d'installer les pilotes vidéo.
je me trouvais à l'origine avec une résolution maximale de 800x600px.

J'ai utilisé cet article pour m'aider.
Comme le dis la page Nvidia je suis obligé d'utiliser la version 100.14.11 en utilisant le .run d'Nvidia. Il n'y a rien dans les dépots qui focntionne avec cette carte.

J'ai donc un fichier NVIDIA-Linux-x86-100.14.11-pkg1.run que je m'empresse d'exécuter. Je ferme le serveur X, arrête KDM, j'installe libc6-dev comme demandé par Nvidia. Je lance l'installation, je me retrouve avec cette erreur :

No precompiled kernel interface was found to match your kernel; this means
that the installer will need to compile a new kernel interface.

Apparemment, si je continue, tout s'installe correctement. Aucun message d'erreur autre que celui-là.
Je ferme, je redémarre. Au redémarrage, rien n'a changé, je fais un sudo nvidia-xconfig et redémarre X, la résolution maximale est maintenant de 640x480 (et inférieur, ça descend jusqu'à 300 pixels et quelques) !
Je n'ai aucun logo NVidia au démarrage de la session.

Dans Menu K > System > NVidia X Server Settings mon écran est effectivement reconnu comme ayant une résolution maximale de 640x480 pixels, je comprends mieux maintenant

J'ai tenté de restaurer la sauvegarde que j'avais faite de xorg.conf, le changement a été effectué mais je ne peux toujours pas augmenter la résolution d'écran, (et nvidia X Server settings me dit que j'utilise plus le driver Nvidia).

Quelqu'un peut-il m'aider svp ? Je suis perdu
Envy ne veut pas démarrer non plus (no module amed vte), et je voudrais bien installer les drivers

Merci !

Voilà le xorg.conf modifié par l'utilitaire NVIDIA :

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Jun 13 18:39:30 PDT 2007

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

  # path to defoma fonts
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/usr/share/fonts/X11/cyrillic"
    FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/Type1"
    FontPath        "/usr/share/fonts/X11/100dpi"
    FontPath        "/usr/share/fonts/X11/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "int10"
    Load           "vbe"
    Load           "glx"
    Load           "v4l"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "oss"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier     "Synaptics Touchpad"
    Driver         "synaptics"
    Option         "SendCoreEvents" "true"
    Option         "Device" "/dev/psaux"
    Option         "Protocol" "auto-dev"
    Option         "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Generic Monitor"
    VendorName     "Plug 'n' Play"
    ModelName      "Plug 'n' Play"
    Gamma           1
    ModeLine       "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection

Section "Monitor"
 # 
    Identifier     "monitor1"
    Gamma           1
EndSection

Section "Device"
    Identifier     "Generic Video Card"
    Driver         "nvidia"
    BoardName      "vesa"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
 # 
    Identifier     "device1"
    Driver         "vesa"
    BoardName      "vesa"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Generic Video Card"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Virtual     640 480
        Depth       24
        Modes      "640x480@60"
    EndSubSection
EndSection

Section "Screen"
 # 
    Identifier     "screen1"
    Device         "device1"
    Monitor        "monitor1"
    DefaultDepth    24
EndSection

Dernière modification par Daddo (Le 15/08/2007, à 13:17)

jdautz · Le 15/08/2007, à 03:07

Je ne suis pas sûr que tu ait besoin des valeurs modeline. Je te fais une petite copie du mien pour comparer, adapte tout ça et remet les blocs dans l'ordre, ce sera plus lisible (device nvidia / monitor / screen). Apparament ton fichier prévoit un 2eme écran. N'hésite pas pour t'y retrouver à faire des copie de ton xorg.conf vers xorg.conf.20070815_0000 par exemple.

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5200]"
Driver "nvidia"
Busid "PCI:2:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
Horizsync 28-64
Vertrefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV34 [GeForce FX 5200]"
Monitor "Écran générique"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection

Sectio# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg