Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

#1 Le 28/10/2013, à 16:44

Cisco32

ASUS 1225B - Xubuntu 12.10 - plantages

Bonjour a tous,
J ai des problemes avec Xubuntu sur l ASUS 1225B.
L'écran se fige et l ordi plante -> obligé d'éteindre en forcé avec le bouton maintenu.
Je remarque que ça arrive quand il est sur batterie, sur secteur c'est tres rare.
Et je me demande si ca n'est pas lié au WIFI?? (--reconection en cours--)
Egalement, dans quel fichier log puis je retrouver le journal avant plantage (mais apres redemarage..)

J espere avoir posté sur le bon forum.

Merci pour vos réponses.

Dernière modification par Cisco32 (Le 28/10/2013, à 17:23)


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#2 Le 28/10/2013, à 20:37

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Quelqu un pourrait me dire ou je peux trouver le fichier LOG SVP?


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#3 Le 28/10/2013, à 21:14

The Uploader

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Salut

Les fichiers journaux sont dans /var/log.
C'est quelle version de Xubuntu ?


Passer de Ubuntu 10.04 à Xubuntu 12.04 LTS
ASUS N56VV (UEFI + GPT, Core i5-3230M @ 2.60GHz, Intel HD4000 + GeForce 750M, 12 Go de RAM, SSD 1 To)
Système principal : Archlinux (amd64), avec KDE 4
Système oublié la plupart du temps : Windows 8.1 Update 1 (x64, OEM)

Hors ligne

#4 Le 28/10/2013, à 21:19

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Salut,
C est XUBUNTU 12.10 mais ca faisait pareil sous la 12.04LTS.
Dans VAR LOG c est quel fichier ?

MErci


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#5 Le 28/10/2013, à 21:21

The Uploader

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Tente d'abord de donner le contenu de /var/log/Xorg.0.log ou plutôt /var/log/Xorg.0.log.old

As tu essayé la 13.04, au moins en Live sur une clé USB ?


Passer de Ubuntu 10.04 à Xubuntu 12.04 LTS
ASUS N56VV (UEFI + GPT, Core i5-3230M @ 2.60GHz, Intel HD4000 + GeForce 750M, 12 Go de RAM, SSD 1 To)
Système principal : Archlinux (amd64), avec KDE 4
Système oublié la plupart du temps : Windows 8.1 Update 1 (x64, OEM)

Hors ligne

#6 Le 28/10/2013, à 21:27

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Je prefere m assurer avec la 12.10 car j ai cru lire qu il y avait des plantages avec la 13...
J attends un peu ..


Ci dessous le XORG 0 Old

Est ce OK?


[    27.278]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    27.278] X Protocol Version 11, Revision 0
[    27.278] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    27.278] Current Operating System: Linux cisco-1225B 3.5.0-42-generic #65-Ubuntu SMP Tue Oct 1 23:38:22 UTC 2013 x86_64
[    27.279] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-42-generic root=UUID=3bc10ab6-fa02-48a8-99b1-8372a3638af8 ro quiet splash vt.handoff=7
[    27.279] Build Date: 16 October 2013  04:38:15PM
[    27.279] xorg-server 2:1.13.0-0ubuntu6.4 (For technical support please see http://www.ubuntu.com/support)
[    27.279] Current version of pixman: 0.26.0
[    27.279]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    27.279] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.280] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 28 14:33:49 2013
[    27.476] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.478] (==) No Layout section.  Using the first Screen section.
[    27.478] (==) No screen section available. Using defaults.
[    27.478] (**) |-->Screen "Default Screen Section" (0)
[    27.478] (**) |   |-->Monitor "<default monitor>"
[    27.479] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    27.480] (==) Automatically adding devices
[    27.480] (==) Automatically enabling devices
[    27.480] (==) Automatically adding GPU devices
[    27.480] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    27.480]     Entry deleted from font path.
[    27.480] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    27.480]     Entry deleted from font path.
[    27.481] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    27.481]     Entry deleted from font path.
[    27.481] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    27.481]     Entry deleted from font path.
[    27.481] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    27.481]     Entry deleted from font path.
[    27.481] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    27.481]     Entry deleted from font path.
[    27.481] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    27.482] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    27.482] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.482] (II) Loader magic: 0x7f223cbc0c40
[    27.482] (II) Module ABI versions:
[    27.482]     X.Org ANSI C Emulation: 0.4
[    27.482]     X.Org Video Driver: 13.0
[    27.482]     X.Org XInput driver : 18.0
[    27.482]     X.Org Server Extension : 7.0
[    27.488] (II) config/udev: Adding drm device (/dev/dri/card0)
[    27.499] (--) PCI:*(0:0:1:0) 1002:9807:1043:103b rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[    27.500] (II) Open ACPI successful (/var/run/acpid.socket)
[    27.500] Initializing built-in extension Generic Event Extension
[    27.500] Initializing built-in extension SHAPE
[    27.500] Initializing built-in extension MIT-SHM
[    27.500] Initializing built-in extension XInputExtension
[    27.500] Initializing built-in extension XTEST
[    27.501] Initializing built-in extension BIG-REQUESTS
[    27.501] Initializing built-in extension SYNC
[    27.501] Initializing built-in extension XKEYBOARD
[    27.501] Initializing built-in extension XC-MISC
[    27.501] Initializing built-in extension SECURITY
[    27.501] Initializing built-in extension XINERAMA
[    27.501] Initializing built-in extension XFIXES
[    27.501] Initializing built-in extension RENDER
[    27.501] Initializing built-in extension RANDR
[    27.501] Initializing built-in extension COMPOSITE
[    27.502] Initializing built-in extension DAMAGE
[    27.502] Initializing built-in extension MIT-SCREEN-SAVER
[    27.502] Initializing built-in extension DOUBLE-BUFFER
[    27.502] Initializing built-in extension RECORD
[    27.502] Initializing built-in extension DPMS
[    27.502] Initializing built-in extension X-Resource
[    27.502] Initializing built-in extension XVideo
[    27.502] Initializing built-in extension XVideo-MotionCompensation
[    27.502] Initializing built-in extension XFree86-VidModeExtension
[    27.503] Initializing built-in extension XFree86-DGA
[    27.503] Initializing built-in extension XFree86-DRI
[    27.503] Initializing built-in extension DRI2
[    27.503] (II) LoadModule: "glx"
[    27.522] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    27.522] (II) Module glx: vendor="X.Org Foundation"
[    27.523]     compiled for 1.13.0, module version = 1.0.0
[    27.523]     ABI class: X.Org Server Extension, version 7.0
[    27.523] (==) AIGLX enabled
[    27.523] Loading extension GLX
[    27.523] (==) Matched fglrx as autoconfigured driver 0
[    27.523] (==) Matched ati as autoconfigured driver 1
[    27.523] (==) Matched fglrx as autoconfigured driver 2
[    27.523] (==) Matched ati as autoconfigured driver 3
[    27.523] (==) Matched vesa as autoconfigured driver 4
[    27.524] (==) Matched modesetting as autoconfigured driver 5
[    27.524] (==) Matched fbdev as autoconfigured driver 6
[    27.524] (==) Assigned the driver to the xf86ConfigLayout
[    27.524] (II) LoadModule: "fglrx"
[    27.526] (WW) Warning, couldn't open module fglrx
[    27.526] (II) UnloadModule: "fglrx"
[    27.526] (II) Unloading fglrx
[    27.527] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    27.527] (II) LoadModule: "ati"
[    27.528] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    27.528] (II) Module ati: vendor="X.Org Foundation"
[    27.528]     compiled for 1.13.0, module version = 6.99.99
[    27.528]     Module class: X.Org Video Driver
[    27.529]     ABI class: X.Org Video Driver, version 13.0
[    27.529] (II) LoadModule: "radeon"
[    27.530] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    27.531] (II) Module radeon: vendor="X.Org Foundation"
[    27.531]     compiled for 1.13.0, module version = 6.99.99
[    27.531]     Module class: X.Org Video Driver
[    27.531]     ABI class: X.Org Video Driver, version 13.0
[    27.531] (II) LoadModule: "vesa"
[    27.533] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.533] (II) Module vesa: vendor="X.Org Foundation"
[    27.533]     compiled for 1.12.99.902, module version = 2.3.2
[    27.533]     Module class: X.Org Video Driver
[    27.533]     ABI class: X.Org Video Driver, version 13.0
[    27.533] (II) LoadModule: "modesetting"
[    27.534] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    27.535] (II) Module modesetting: vendor="X.Org Foundation"
[    27.535]     compiled for 1.13.0, module version = 0.5.0
[    27.535]     Module class: X.Org Video Driver
[    27.535]     ABI class: X.Org Video Driver, version 13.0
[    27.535] (II) LoadModule: "fbdev"
[    27.544] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.545] (II) Module fbdev: vendor="X.Org Foundation"
[    27.545]     compiled for 1.12.99.902, module version = 0.4.3
[    27.545]     Module class: X.Org Video Driver
[    27.545]     ABI class: X.Org Video Driver, version 13.0
[    27.545] (==) Matched fglrx as autoconfigured driver 0
[    27.545] (==) Matched ati as autoconfigured driver 1
[    27.546] (==) Matched fglrx as autoconfigured driver 2
[    27.546] (==) Matched ati as autoconfigured driver 3
[    27.546] (==) Matched vesa as autoconfigured driver 4
[    27.546] (==) Matched modesetting as autoconfigured driver 5
[    27.546] (==) Matched fbdev as autoconfigured driver 6
[    27.546] (==) Assigned the driver to the xf86ConfigLayout
[    27.546] (II) LoadModule: "fglrx"
[    27.548] (WW) Warning, couldn't open module fglrx
[    27.549] (II) UnloadModule: "fglrx"
[    27.549] (II) Unloading fglrx
[    27.549] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    27.549] (II) LoadModule: "ati"
[    27.550] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    27.550] (II) Module ati: vendor="X.Org Foundation"
[    27.550]     compiled for 1.13.0, module version = 6.99.99
[    27.550]     Module class: X.Org Video Driver
[    27.550]     ABI class: X.Org Video Driver, version 13.0
[    27.550] (II) LoadModule: "vesa"
[    27.556] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.556] (II) Module vesa: vendor="X.Org Foundation"
[    27.556]     compiled for 1.12.99.902, module version = 2.3.2
[    27.556]     Module class: X.Org Video Driver
[    27.556]     ABI class: X.Org Video Driver, version 13.0
[    27.556] (II) UnloadModule: "vesa"
[    27.556] (II) Unloading vesa
[    27.557] (II) Failed to load module "vesa" (already loaded, 0)
[    27.557] (II) LoadModule: "modesetting"
[    27.558] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    27.558] (II) Module modesetting: vendor="X.Org Foundation"
[    27.558]     compiled for 1.13.0, module version = 0.5.0
[    27.558]     Module class: X.Org Video Driver
[    27.558]     ABI class: X.Org Video Driver, version 13.0
[    27.558] (II) UnloadModule: "modesetting"
[    27.558] (II) Unloading modesetting
[    27.558] (II) Failed to load module "modesetting" (already loaded, 0)
[    27.559] (II) LoadModule: "fbdev"
[    27.559] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.560] (II) Module fbdev: vendor="X.Org Foundation"
[    27.560]     compiled for 1.12.99.902, module version = 0.4.3
[    27.560]     Module class: X.Org Video Driver
[    27.560]     ABI class: X.Org Video Driver, version 13.0
[    27.560] (II) UnloadModule: "fbdev"
[    27.560] (II) Unloading fbdev
[    27.560] (II) Failed to load module "fbdev" (already loaded, 0)
[    27.560] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE
[    27.607] (II) VESA: driver for VESA chipsets: vesa
[    27.607] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    27.607] (II) FBDEV: driver for framebuffer: fbdev
[    27.607] (++) using VT number 7

[    27.608] (II) [KMS] Kernel modesetting enabled.
[    27.608] (WW) Falling back to old probe method for vesa
[    27.609] (WW) Falling back to old probe method for modesetting
[    27.609] (WW) Falling back to old probe method for fbdev
[    27.609] (II) Loading sub module "fbdevhw"
[    27.609] (II) LoadModule: "fbdevhw"
[    27.610] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.610] (II) Module fbdevhw: vendor="X.Org Foundation"
[    27.610]     compiled for 1.13.0, module version = 0.0.2
[    27.610]     ABI class: X.Org Video Driver, version 13.0
[    27.611] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    27.611] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    27.611] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    27.611] (==) RADEON(0): Default visual is TrueColor
[    27.611] (==) RADEON(0): RGB weight 888
[    27.611] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    27.612] (--) RADEON(0): Chipset: "AMD Radeon HD 6200 Series Graphics" (ChipID = 0x9807)
[    27.612] (II) Loading sub module "dri2"
[    27.612] (II) LoadModule: "dri2"
[    27.612] (II) Module "dri2" already built-in
[    27.612] (II) Loading sub module "exa"
[    27.612] (II) LoadModule: "exa"
[    27.613] (II) Loading /usr/lib/xorg/modules/libexa.so
[    27.614] (II) Module exa: vendor="X.Org Foundation"
[    27.614]     compiled for 1.13.0, module version = 2.6.0
[    27.614]     ABI class: X.Org Video Driver, version 13.0
[    27.614] (II) RADEON(0): KMS Color Tiling: enabled
[    27.614] (II) RADEON(0): KMS Pageflipping: enabled
[    27.614] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    27.615] (II) RADEON(0): Output LVDS has no monitor section
[    27.622] (II) RADEON(0): Output HDMI-0 has no monitor section
[    27.644] (II) RADEON(0): Output VGA-0 has no monitor section
[    27.645] (II) RADEON(0): EDID for output LVDS
[    27.645] (II) RADEON(0): Manufacturer: IVO  Model: 489  Serial#: 0
[    27.645] (II) RADEON(0): Year: 2010  Week: 21
[    27.645] (II) RADEON(0): EDID Version: 1.3
[    27.645] (II) RADEON(0): Digital Display Input
[    27.645] (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[    27.645] (II) RADEON(0): Gamma: 2.20
[    27.645] (II) RADEON(0): No DPMS capabilities specified
[    27.646] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    27.646] (II) RADEON(0): First detailed timing is preferred mode
[    27.646] (II) RADEON(0): redX: 0.566 redY: 0.337   greenX: 0.324 greenY: 0.572
[    27.646] (II) RADEON(0): blueX: 0.156 blueY: 0.120   whiteX: 0.312 whiteY: 0.328
[    27.646] (II) RADEON(0): Manufacturer's mask: 0
[    27.646] (II) RADEON(0): Supported detailed timing:
[    27.646] (II) RADEON(0): clock: 76.8 MHz   Image Size:  256 x 144 mm
[    27.646] (II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1560 h_border: 0
[    27.646] (II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 783 v_blanking: 821 v_border: 0
[    27.647] (II) RADEON(0): Ranges: V min: 55 V max: 65 Hz, H min: 43 H max: 49 kHz, PixClock max 85 MHz
[    27.647] (II) RADEON(0): Monitor name: M116NWR1 R0
[    27.647] (II) RADEON(0): EDID (in hex):
[    27.647] (II) RADEON(0):     00ffffffffffff0026cf890400000000
[    27.647] (II) RADEON(0):     15140103801a0e780a12309156539228
[    27.647] (II) RADEON(0):     1e505400000001010101010101010101
[    27.647] (II) RADEON(0):     010101010101051e56c2500035303020
[    27.647] (II) RADEON(0):     3c000090100000190000000000000000
[    27.647] (II) RADEON(0):     00000000000000000000000000fd0037
[    27.648] (II) RADEON(0):     412b3108000a202020202020000000fc
[    27.648] (II) RADEON(0):     004d3131364e575231205230200a0078
[    27.648] (II) RADEON(0): Printing probed modes for output LVDS
[    27.648] (II) RADEON(0): Modeline "1366x768"x60.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    27.648] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    27.648] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    27.648] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    27.649] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    27.649] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    27.649] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    27.649] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    27.654] (II) RADEON(0): EDID for output HDMI-0
[    27.676] (II) RADEON(0): EDID for output VGA-0
[    27.676] (II) RADEON(0): Output LVDS connected
[    27.676] (II) RADEON(0): Output HDMI-0 disconnected
[    27.676] (II) RADEON(0): Output VGA-0 disconnected
[    27.677] (II) RADEON(0): Using exact sizes for initial modes
[    27.677] (II) RADEON(0): Output LVDS using initial mode 1366x768
[    27.677] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.677] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fba0000
[    27.677] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    27.677] (==) RADEON(0): DPI set to (96, 96)
[    27.677] (II) Loading sub module "fb"
[    27.677] (II) LoadModule: "fb"
[    27.679] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.679] (II) Module fb: vendor="X.Org Foundation"
[    27.679]     compiled for 1.13.0, module version = 1.0.0
[    27.680]     ABI class: X.Org ANSI C Emulation, version 0.4
[    27.680] (II) Loading sub module "ramdac"
[    27.680] (II) LoadModule: "ramdac"
[    27.680] (II) Module "ramdac" already built-in
[    27.680] (II) UnloadModule: "vesa"
[    27.680] (II) Unloading vesa
[    27.680] (II) UnloadModule: "modesetting"
[    27.681] (II) Unloading modesetting
[    27.681] (II) UnloadModule: "fbdev"
[    27.681] (II) Unloading fbdev
[    27.681] (II) UnloadSubModule: "fbdevhw"
[    27.681] (II) Unloading fbdevhw
[    27.681] (--) Depth 24 pixmap format is 32 bpp
[    27.682] (II) RADEON(0): [DRI2] Setup complete
[    27.682] (II) RADEON(0): [DRI2]   DRI driver: r600
[    27.682] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    27.683] (II) RADEON(0): Front buffer size: 4128K
[    27.683] (II) RADEON(0): VRAM usage limit set to 228182K
[    27.683] (==) RADEON(0): Backing store disabled
[    27.683] (II) RADEON(0): Direct rendering enabled
[    27.683] (II) RADEON(0): Setting EXA maxPitchBytes
[    27.684] (II) EXA(0): Driver allocated offscreen pixmaps
[    27.684] (II) EXA(0): Driver registered support for the following operations:
[    27.684] (II)         Solid
[    27.684] (II)         Copy
[    27.684] (II)         Composite (RENDER acceleration)
[    27.684] (II)         UploadToScreen
[    27.684] (II)         DownloadFromScreen
[    27.684] (II) RADEON(0): Acceleration enabled
[    27.685] (==) RADEON(0): DPMS enabled
[    27.685] (==) RADEON(0): Silken mouse enabled
[    27.685] (II) RADEON(0): Set up textured video
[    27.685] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    27.685] (II) RADEON(0): [XvMC] Extension initialized.
[    27.685] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.686] (--) RandR disabled
[    27.830] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    27.830] (II) AIGLX: enabled GLX_INTEL_swap_event
[    27.830] (II) AIGLX: enabled GLX_ARB_create_context
[    27.830] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    27.831] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    27.831] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    27.831] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    27.833] (II) AIGLX: Loaded and initialized r600
[    27.833] (II) GLX: Initialized DRI2 GL provider for screen 0
[    27.972] (II) RADEON(0): Setting screen physical size to 361 x 203
[    28.046] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    28.063] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.064] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.064] (II) LoadModule: "evdev"
[    28.065] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.065] (II) Module evdev: vendor="X.Org Foundation"
[    28.065]     compiled for 1.13.0, module version = 2.7.3
[    28.065]     Module class: X.Org XInput Driver
[    28.065]     ABI class: X.Org XInput driver, version 18.0
[    28.066] (II) Using input driver 'evdev' for 'Power Button'
[    28.066] (**) Power Button: always reports core events
[    28.066] (**) evdev: Power Button: Device: "/dev/input/event2"
[    28.066] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.066] (--) evdev: Power Button: Found keys
[    28.066] (II) evdev: Power Button: Configuring as keyboard
[    28.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    28.066] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.066] (**) Option "xkb_rules" "evdev"
[    28.067] (**) Option "xkb_model" "pc105"
[    28.067] (**) Option "xkb_layout" "fr"
[    28.067] (**) Option "xkb_variant" "latin9"
[    28.077] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[    28.080] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    28.080] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    28.080] (II) Using input driver 'evdev' for 'Video Bus'
[    28.080] (**) Video Bus: always reports core events
[    28.080] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    28.080] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    28.081] (--) evdev: Video Bus: Found keys
[    28.081] (II) evdev: Video Bus: Configuring as keyboard
[    28.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6/event6"
[    28.081] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.081] (**) Option "xkb_rules" "evdev"
[    28.081] (**) Option "xkb_model" "pc105"
[    28.081] (**) Option "xkb_layout" "fr"
[    28.081] (**) Option "xkb_variant" "latin9"
[    28.083] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    28.083] (II) No input driver specified, ignoring this device.
[    28.083] (II) This device may have been added with another device file.
[    28.084] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    28.084] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    28.085] (II) Using input driver 'evdev' for 'Sleep Button'
[    28.085] (**) Sleep Button: always reports core events
[    28.085] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    28.085] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    28.085] (--) evdev: Sleep Button: Found keys
[    28.085] (II) evdev: Sleep Button: Configuring as keyboard
[    28.085] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    28.085] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    28.085] (**) Option "xkb_rules" "evdev"
[    28.085] (**) Option "xkb_model" "pc105"
[    28.086] (**) Option "xkb_layout" "fr"
[    28.086] (**) Option "xkb_variant" "latin9"
[    28.088] (II) config/udev: Adding drm device (/dev/dri/card0)
[    28.089] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event10)
[    28.089] (II) No input driver specified, ignoring this device.
[    28.090] (II) This device may have been added with another device file.
[    28.091] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[    28.091] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    28.091] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    28.091] (**) Logitech USB Receiver: always reports core events
[    28.091] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[    28.092] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    28.092] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    28.092] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    28.092] (--) evdev: Logitech USB Receiver: Found relative axes
[    28.092] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    28.092] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    28.092] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    28.092] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    28.092] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.092] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input4/event4"
[    28.092] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[    28.093] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    28.094] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    28.094] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    28.094] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    28.094] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    28.095] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    28.095] (II) No input driver specified, ignoring this device.
[    28.095] (II) This device may have been added with another device file.
[    28.096] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[    28.096] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    28.097] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    28.097] (**) Logitech USB Receiver: always reports core events
[    28.097] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[    28.097] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    28.097] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    28.097] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    28.097] (--) evdev: Logitech USB Receiver: Found relative axes
[    28.097] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    28.097] (--) evdev: Logitech USB Receiver: Found absolute axes
[    28.097] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    28.097] (--) evdev: Logitech USB Receiver: Found keys
[    28.097] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    28.097] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    28.097] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    28.098] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    28.098] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.098] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input5/event5"
[    28.098] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    28.098] (**) Option "xkb_rules" "evdev"
[    28.098] (**) Option "xkb_model" "pc105"
[    28.098] (**) Option "xkb_layout" "fr"
[    28.098] (**) Option "xkb_variant" "latin9"
[    28.099] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    28.099] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    28.105] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    28.105] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    28.105] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    28.105] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    28.106] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event7)
[    28.107] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[    28.107] (II) Using input driver 'evdev' for 'USB 2.0 UVC VGA WebCam'
[    28.107] (**) USB 2.0 UVC VGA WebCam: always reports core events
[    28.107] (**) evdev: USB 2.0 UVC VGA WebCam: Device: "/dev/input/event7"
[    28.107] (--) evdev: USB 2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5716
[    28.107] (--) evdev: USB 2.0 UVC VGA WebCam: Found keys
[    28.107] (II) evdev: USB 2.0 UVC VGA WebCam: Configuring as keyboard
[    28.107] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input7/event7"
[    28.107] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 11)
[    28.107] (**) Option "xkb_rules" "evdev"
[    28.111] (**) Option "xkb_model" "pc105"
[    28.111] (**) Option "xkb_layout" "fr"
[    28.111] (**) Option "xkb_variant" "latin9"
[    28.115] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event11)
[    28.115] (II) No input driver specified, ignoring this device.
[    28.115] (II) This device may have been added with another device file.
[    28.116] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event12)
[    28.116] (II) No input driver specified, ignoring this device.
[    28.117] (II) This device may have been added with another device file.
[    28.118] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[    28.118] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    28.118] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    28.118] (**) Eee PC WMI hotkeys: always reports core events
[    28.118] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
[    28.118] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    28.118] (--) evdev: Eee PC WMI hotkeys: Found keys
[    28.118] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    28.118] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event9"
[    28.119] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[    28.119] (**) Option "xkb_rules" "evdev"
[    28.119] (**) Option "xkb_model" "pc105"
[    28.119] (**) Option "xkb_layout" "fr"
[    28.119] (**) Option "xkb_variant" "latin9"
[    28.121] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    28.121] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.121] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    28.122] (**) AT Translated Set 2 keyboard: always reports core events
[    28.122] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    28.122] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    28.122] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    28.122] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    28.122] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    28.122] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    28.122] (**) Option "xkb_rules" "evdev"
[    28.122] (**) Option "xkb_model" "pc105"
[    28.123] (**) Option "xkb_layout" "fr"
[    28.123] (**) Option "xkb_variant" "latin9"
[    28.131] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    28.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    28.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    28.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    28.131] (II) LoadModule: "synaptics"
[    28.132] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    28.132] (II) Module synaptics: vendor="X.Org Foundation"
[    28.133]     compiled for 1.12.99.905, module version = 1.6.2
[    28.133]     Module class: X.Org XInput Driver
[    28.133]     ABI class: X.Org XInput driver, version 18.0
[    28.133] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    28.133] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    28.133] (**) Option "Device" "/dev/input/event8"
[    28.196] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    28.196] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5722
[    28.196] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4706
[    28.196] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    28.196] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    28.196] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    28.196] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    28.197] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    28.197] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    28.228] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input8/event8"
[    28.228] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    28.228] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    28.228] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    28.228] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[    28.229] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    28.229] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    28.229] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    28.230] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    28.230] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    28.231] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    28.231] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    36.802] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    36.802] (II) RADEON(0): Using EDID range info for horizontal sync
[    36.802] (II) RADEON(0): Using EDID range info for vertical refresh
[    36.802] (II) RADEON(0): Printing DDC gathered Modelines:
[    36.802] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    38.373] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    38.373] (II) RADEON(0): Using hsync ranges from config file
[    38.373] (II) RADEON(0): Using vrefresh ranges from config file
[    38.373] (II) RADEON(0): Printing DDC gathered Modelines:
[    38.373] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    38.677] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    38.677] (II) RADEON(0): Using hsync ranges from config file
[    38.677] (II) RADEON(0): Using vrefresh ranges from config file
[    38.677] (II) RADEON(0): Printing DDC gathered Modelines:
[    38.677] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[  6094.461] (II) AIGLX: Suspending AIGLX clients for VT switch
[  6098.510] (II) Open ACPI successful (/var/run/acpid.socket)
[  6098.510] (II) AIGLX: Resuming AIGLX clients after VT switch
[  6098.513] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[  6098.513] (II) RADEON(0): Using hsync ranges from config file
[  6098.513] (II) RADEON(0): Using vrefresh ranges from config file
[  6098.513] (II) RADEON(0): Printing DDC gathered Modelines:
[  6098.513] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[  6098.557] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  7595.290] (II) AIGLX: Suspending AIGLX clients for VT switch
[  7600.101] (II) Open ACPI successful (/var/run/acpid.socket)
[  7600.101] (II) AIGLX: Resuming AIGLX clients after VT switch
[  7600.104] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[  7600.104] (II) RADEON(0): Using hsync ranges from config file
[  7600.104] (II) RADEON(0): Using vrefresh ranges from config file
[  7600.104] (II) RADEON(0): Printing DDC gathered Modelines:
[  7600.105] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[  7600.144] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 11166.885] (II) UnloadModule: "synaptics"
[ 11166.885] (II) evdev: AT Translated Set 2 keyboard: Close
[ 11166.885] (II) UnloadModule: "evdev"
[ 11166.885] (II) evdev: Eee PC WMI hotkeys: Close
[ 11166.885] (II) UnloadModule: "evdev"
[ 11166.886] (II) evdev: USB 2.0 UVC VGA WebCam: Close
[ 11166.886] (II) UnloadModule: "evdev"
[ 11166.886] (II) evdev: Logitech USB Receiver: Close
[ 11166.886] (II) UnloadModule: "evdev"
[ 11166.886] (II) evdev: Logitech USB Receiver: Close
[ 11166.886] (II) UnloadModule: "evdev"
[ 11166.886] (II) evdev: Sleep Button: Close
[ 11166.886] (II) UnloadModule: "evdev"
[ 11166.887] (II) evdev: Video Bus: Close
[ 11166.887] (II) UnloadModule: "evdev"
[ 11166.887] (II) evdev: Power Button: Close
[ 11166.887] (II) UnloadModule: "evdev"
[ 11166.914] Server terminated successfully (0). Closing log file.


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#7 Le 28/10/2013, à 21:31

The Uploader

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Quels sont les autres fichiers présents dans /var/log ?

Tu peux installer tree pour avoir une vue rapide dans un terminal et la copier/coller sur le forum :

sudo apt-get install tree
tree /var/log

Chez moi ça donne :

tree /var/log               
/var/log
├── btmp
├── cdemu-daemon.log
├── cups
│   ├── access_log
│   ├── access_log.1
│   ├── error_log
│   └── page_log
├── faillog
├── gufw.log
├── journal
│   └── 3aebc00a19c14690ae749432a15ea857
│       ├── system@0004e8f047f2d87a-798780f65dd64f89.journal~
│       ├── system@0004e8f4fdee5d94-e5338da89bab4e78.journal~
│       ├── system@0004e9065573431b-c79d60165932bb15.journal~
│       ├── system@0004e90b595fcf8e-c5023adbaf422bdf.journal~
│       ├── system@0004e934a936457b-44d2d20b0c0caa27.journal~
│       ├── system@0004e94445abc6b9-d63f5fce02f19590.journal~
│       ├── system@987c526f869c4308aff25f38216c4c8d-0000000000000001-0004e944451fa481.journal
│       ├── system@987c526f869c4308aff25f38216c4c8d-0000000000005615-0004e9531cc90fb0.journal
│       ├── system.journal
│       ├── user-1000@0004e8f50021e97b-e3c254166b0fa9a3.journal~
│       ├── user-1000@0004e90655edbd5b-657539785a1240dc.journal~
│       ├── user-1000@0004e90b59ebcb6d-ba25ffda754883f1.journal~
│       ├── user-1000@0004e934a9d544d1-f7445413e6245d17.journal~
│       ├── user-1000@b7ef1967f7894c57bfd56bcfe6f9656c-00000000000003a2-0004e934a9d579d3.journal
│       ├── user-1000@b7ef1967f7894c57bfd56bcfe6f9656c-0000000000005a01-0004e955cc405cb1.journal
│       └── user-1000.journal
├── lastlog
├── lxdm.log
├── lxdm.log.old
├── old
├── pacman.log
├── wtmp
├── Xorg.0.log
└── Xorg.0.log.old

4 directories, 31 files

(mais j'utilise Archlinux, ce sera différent sur Xubuntu, et c'est normal)

Dernière modification par The Uploader (Le 28/10/2013, à 21:33)


Passer de Ubuntu 10.04 à Xubuntu 12.04 LTS
ASUS N56VV (UEFI + GPT, Core i5-3230M @ 2.60GHz, Intel HD4000 + GeForce 750M, 12 Go de RAM, SSD 1 To)
Système principal : Archlinux (amd64), avec KDE 4
Système oublié la plupart du temps : Windows 8.1 Update 1 (x64, OEM)

Hors ligne

#8 Le 28/10/2013, à 21:36

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Par contre, l ordi n a pas planté depuis 15h environ cette apres midi puisque je l ai branché....

Voila:

/var/log
├── alternatives.log
├── alternatives.log.1
├── alternatives.log.2.gz
├── apport.log
├── apt
│   ├── history.log
│   ├── history.log.1.gz
│   ├── history.log.2.gz
│   ├── term.log
│   ├── term.log.1.gz
│   └── term.log.2.gz
├── auth.log
├── auth.log.1
├── auth.log.2.gz
├── auth.log.3.gz
├── auth.log.4.gz
├── boot
├── boot.log
├── boot-sav
│   ├── log
│   │   ├── 2013-04-06__07h56boot-repair21
│   │   │   ├── boot-repair.log
│   │   │   ├── boot-repair.logb
│   │   │   ├── RESULTS.txt
│   │   │   ├── sda
│   │   │   │   ├── current_mbr.img
│   │   │   │   └── partition_table.dmp
│   │   │   ├── sda1
│   │   │   ├── sda2
│   │   │   ├── sda5
│   │   │   └── sda7
│   │   │       ├── etc_default_grub_old
│   │   │       ├── etc_fstab_new
│   │   │       ├── etc_fstab_old
│   │   │       ├── grub_before_purge
│   │   │       └── grubenv
│   │   └── boot-repair
│   └── mbr_backups
├── bootstrap.log
├── btmp
├── btmp.1
├── ConsoleKit
│   ├── history
│   ├── history.1
│   └── history.2.gz
├── cups
│   ├── access_log
│   ├── access_log.1.gz
│   ├── access_log.2.gz
│   ├── access_log.3.gz
│   ├── error_log
│   ├── error_log.1.gz
│   ├── error_log.2.gz
│   ├── error_log.3.gz
│   ├── error_log.4.gz
│   ├── error_log.5.gz
│   └── page_log
├── dist-upgrade
│   ├── 20131027-2251
│   │   ├── apt.log
│   │   ├── apt-term.log
│   │   └── history.log
│   ├── apt-clone_system_state.tar.gz
│   ├── apt.log
│   ├── apt-term.log
│   ├── history.log
│   ├── lspci.txt
│   ├── main.log
│   └── term.log
├── dmesg
├── dmesg.0
├── dmesg.1.gz
├── dmesg.2.gz
├── dmesg.3.gz
├── dmesg.4.gz
├── dpkg.log
├── dpkg.log.1
├── dpkg.log.2.gz
├── faillog
├── fontconfig.log
├── fsck
│   ├── checkfs
│   └── checkroot
├── hp
├── installer
│   ├── casper.log
│   ├── debug
│   ├── initial-status.gz
│   ├── media-info
│   ├── partman
│   ├── syslog
│   └── version
├── jockey.log
├── jockey.log.1
├── kern.log
├── kern.log.1
├── kern.log.2.gz
├── kern.log.3.gz
├── kern.log.4.gz
├── lastlog
├── lightdm
│   ├── lightdm.log
│   ├── x-0-greeter.log
│   ├── x-0-greeter.log.old
│   └── x-0.log
├── mail.err
├── mail.log
├── news
│   ├── news.crit
│   ├── news.err
│   └── news.notice
├── pm-powersave.log
├── pm-powersave.log.1
├── pm-powersave.log.2.gz
├── samba
├── speech-dispatcher [error opening dir]
├── syslog
├── syslog.1
├── syslog.2.gz
├── syslog.3.gz
├── syslog.4.gz
├── syslog.5.gz
├── udev
├── ufw.log
├── unattended-upgrades
│   └── unattended-upgrades-shutdown.log
├── upstart
│   ├── alsa-restore.log
│   ├── alsa-restore.log.1.gz
│   ├── alsa-restore.log.2.gz
│   ├── alsa-store.log
│   ├── avahi-daemon.log
│   ├── bluetooth.log.1.gz
│   ├── console-setup.log
│   ├── console-setup.log.1.gz
│   ├── console-setup.log.2.gz
│   ├── console-setup.log.3.gz
│   ├── console-setup.log.4.gz
│   ├── console-setup.log.5.gz
│   ├── container-detect.log
│   ├── container-detect.log.1.gz
│   ├── container-detect.log.2.gz
│   ├── container-detect.log.3.gz
│   ├── container-detect.log.4.gz
│   ├── container-detect.log.5.gz
│   ├── cups.log
│   ├── cups.log.1.gz
│   ├── cups.log.2.gz
│   ├── cups.log.3.gz
│   ├── dbus.log
│   ├── dbus.log.1.gz
│   ├── dbus.log.2.gz
│   ├── dbus.log.3.gz
│   ├── dbus.log.4.gz
│   ├── dbus.log.5.gz
│   ├── hybrid-gfx.log
│   ├── hybrid-gfx.log.1.gz
│   ├── hybrid-gfx.log.2.gz
│   ├── hybrid-gfx.log.3.gz
│   ├── hybrid-gfx.log.4.gz
│   ├── hybrid-gfx.log.5.gz
│   ├── lightdm.log
│   ├── lightdm.log.1.gz
│   ├── modemmanager.log
│   ├── modemmanager.log.1.gz
│   ├── modemmanager.log.2.gz
│   ├── modemmanager.log.3.gz
│   ├── modemmanager.log.4.gz
│   ├── modemmanager.log.5.gz
│   ├── module-init-tools.log
│   ├── module-init-tools.log.1.gz
│   ├── module-init-tools.log.2.gz
│   ├── module-init-tools.log.3.gz
│   ├── module-init-tools.log.4.gz
│   ├── module-init-tools.log.5.gz
│   ├── procps.log
│   ├── procps-static-network-up.log
│   ├── procps-static-network-up.log.1.gz
│   ├── procps-static-network-up.log.2.gz
│   ├── procps-static-network-up.log.3.gz
│   ├── procps-static-network-up.log.4.gz
│   ├── procps-static-network-up.log.5.gz
│   ├── procps-virtual-filesystems.log
│   ├── procps-virtual-filesystems.log.1.gz
│   ├── procps-virtual-filesystems.log.2.gz
│   ├── procps-virtual-filesystems.log.3.gz
│   ├── procps-virtual-filesystems.log.4.gz
│   ├── procps-virtual-filesystems.log.5.gz
│   ├── rsyslog.log
│   ├── rsyslog.log.1.gz
│   ├── rsyslog.log.2.gz
│   ├── rsyslog.log.3.gz
│   ├── rsyslog.log.4.gz
│   ├── rsyslog.log.5.gz
│   ├── ureadahead.log
│   ├── ureadahead.log.1.gz
│   ├── ureadahead.log.2.gz
│   ├── ureadahead.log.3.gz
│   ├── ureadahead.log.4.gz
│   └── ureadahead.log.5.gz
├── wtmp
├── wtmp.1
├── Xorg.0.log
└── Xorg.0.log.old


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#9 Le 28/10/2013, à 21:55

The Uploader

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Alors en fait cela semble être ce problème : https://bugs.launchpad.net/ubuntu/+bug/1014240

La solution (donnée sur la page) est ceci :

gksu leafpad /etc/default/grub

Rajouter

 i8042.reset i8042.nomux

à la ligne

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

Ainsi elle devient :

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.reset i8042.nomux"

Faire Fichier -> Enregistrer. Puis, fermer la fenêtre de leafpad.

Enfin :

sudo update-grub

Puis, redémarrer.

Les autres problèmes pour le 1225B sont mentionnés dans la doc' (je dis ça au cas où tu les aurais aussi):
http://doc.ubuntu-fr.org/asus_eee_pc_1225b

Par ailleurs, c'est bien un problème lié au kernel linux, et la 13.04 contient un kernel plus récent.
Après c'est vrai que j'aurais tendance à utiliser une LTS (comme la 12.04) pour être sûr que ça soit stable.
Tu avais essayé cette solution sur la 12.04 ?

Dernière modification par The Uploader (Le 28/10/2013, à 22:12)


Passer de Ubuntu 10.04 à Xubuntu 12.04 LTS
ASUS N56VV (UEFI + GPT, Core i5-3230M @ 2.60GHz, Intel HD4000 + GeForce 750M, 12 Go de RAM, SSD 1 To)
Système principal : Archlinux (amd64), avec KDE 4
Système oublié la plupart du temps : Windows 8.1 Update 1 (x64, OEM)

Hors ligne

#10 Le 28/10/2013, à 22:09

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Je vais faire cette manip mais je pense qu elle ne reglera que ce probleme (car il y a ça aussi..) de blocage du clavier intempestif au moment du GRUB.

Je ferais un test pour voir si ca regle le probleme de plantage..

A bientot peut etre... (si ca plante plus..)
MErci encore


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#11 Le 28/10/2013, à 22:21

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Ca y est j ai redemarré et je suis sur la batterie..
Dans l attente...

Je n avais pas essayé sous la 12.04 pour les problemes de plantages car je pensais que ça venait d'un manque de puissance (Secteur / batterie) et d une désactivation du Wifi qui fesait planter le tout.


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#12 Le 28/10/2013, à 22:44

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Plantage.... avec une notification de wifi déconnecté gelé sur l écran.
Soit moins de 20minutes de bonheur....

Quel Log dois je regarder pour comprendre ce qui c'est passé?

MErci


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#13 Le 28/10/2013, à 23:30

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Help please


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#14 Le 29/10/2013, à 13:13

The Uploader

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Salut

Peux tu donner le contenu de /boot/grub/grub.cfg ?


Passer de Ubuntu 10.04 à Xubuntu 12.04 LTS
ASUS N56VV (UEFI + GPT, Core i5-3230M @ 2.60GHz, Intel HD4000 + GeForce 750M, 12 Go de RAM, SSD 1 To)
Système principal : Archlinux (amd64), avec KDE 4
Système oublié la plupart du temps : Windows 8.1 Update 1 (x64, OEM)

Hors ligne

#15 Le 29/10/2013, à 18:35

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Salut,
Voila:


#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  3bc10ab6-fa02-48a8-99b1-8372a3638af8
else
  search --no-floppy --fs-uuid --set=root 3bc10ab6-fa02-48a8-99b1-8372a3638af8
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
    set gfxpayload="${1}"
    if [ "${1}" = "keep" ]; then
        set vt_handoff=vt.handoff=7
    else
        set vt_handoff=
    fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3bc10ab6-fa02-48a8-99b1-8372a3638af8' {
recordfail
    gfxmode $linux_gfx_mode
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos7'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  3bc10ab6-fa02-48a8-99b1-8372a3638af8
    else
      search --no-floppy --fs-uuid --set=root 3bc10ab6-fa02-48a8-99b1-8372a3638af8
    fi
    linux    /boot/vmlinuz-3.5.0-42-generic root=UUID=3bc10ab6-fa02-48a8-99b1-8372a3638af8 ro   quiet splash i8042.reset i8042.nomux $vt_handoff
    initrd    /boot/initrd.img-3.5.0-42-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-3bc10ab6-fa02-48a8-99b1-8372a3638af8' {
    menuentry 'Ubuntu, avec Linux 3.5.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-42-generic-advanced-3bc10ab6-fa02-48a8-99b1-8372a3638af8' {
    recordfail
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos7'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  3bc10ab6-fa02-48a8-99b1-8372a3638af8
        else
          search --no-floppy --fs-uuid --set=root 3bc10ab6-fa02-48a8-99b1-8372a3638af8
        fi
        echo    'Chargement de Linux 3.5.0-42-generic…'
        linux    /boot/vmlinuz-3.5.0-42-generic root=UUID=3bc10ab6-fa02-48a8-99b1-8372a3638af8 ro   quiet splash i8042.reset i8042.nomux $vt_handoff
        echo    'Chargement du disque mémoire initial…'
        initrd    /boot/initrd.img-3.5.0-42-generic
    }
    menuentry 'Ubuntu, avec Linux 3.5.0-42-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-42-generic-recovery-3bc10ab6-fa02-48a8-99b1-8372a3638af8' {
    recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos7'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  3bc10ab6-fa02-48a8-99b1-8372a3638af8
        else
          search --no-floppy --fs-uuid --set=root 3bc10ab6-fa02-48a8-99b1-8372a3638af8
        fi
        echo    'Chargement de Linux 3.5.0-42-generic…'
        linux    /boot/vmlinuz-3.5.0-42-generic root=UUID=3bc10ab6-fa02-48a8-99b1-8372a3638af8 ro recovery nomodeset
        echo    'Chargement du disque mémoire initial…'
        initrd    /boot/initrd.img-3.5.0-42-generic
    }
    menuentry 'Ubuntu, avec Linux 3.2.0-55-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-55-generic-advanced-3bc10ab6-fa02-48a8-99b1-8372a3638af8' {
    recordfail
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos7'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  3bc10ab6-fa02-48a8-99b1-8372a3638af8
        else
          search --no-floppy --fs-uuid --set=root 3bc10ab6-fa02-48a8-99b1-8372a3638af8
        fi
        echo    'Chargement de Linux 3.2.0-55-generic…'
        linux    /boot/vmlinuz-3.2.0-55-generic root=UUID=3bc10ab6-fa02-48a8-99b1-8372a3638af8 ro   quiet splash i8042.reset i8042.nomux $vt_handoff
        echo    'Chargement du disque mémoire initial…'
        initrd    /boot/initrd.img-3.2.0-55-generic
    }
    menuentry 'Ubuntu, avec Linux 3.2.0-55-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-55-generic-recovery-3bc10ab6-fa02-48a8-99b1-8372a3638af8' {
    recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos7'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  3bc10ab6-fa02-48a8-99b1-8372a3638af8
        else
          search --no-floppy --fs-uuid --set=root 3bc10ab6-fa02-48a8-99b1-8372a3638af8
        fi
        echo    'Chargement de Linux 3.2.0-55-generic…'
        linux    /boot/vmlinuz-3.2.0-55-generic root=UUID=3bc10ab6-fa02-48a8-99b1-8372a3638af8 ro recovery nomodeset
        echo    'Chargement du disque mémoire initial…'
        initrd    /boot/initrd.img-3.2.0-55-generic
    }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos7'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  3bc10ab6-fa02-48a8-99b1-8372a3638af8
    else
      search --no-floppy --fs-uuid --set=root 3bc10ab6-fa02-48a8-99b1-8372a3638af8
    fi
    linux16    /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos7'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  3bc10ab6-fa02-48a8-99b1-8372a3638af8
    else
      search --no-floppy --fs-uuid --set=root 3bc10ab6-fa02-48a8-99b1-8372a3638af8
    fi
    linux16    /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-F430478C304754B0' {
    insmod part_msdos
    insmod ntfs
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  F430478C304754B0
    else
      search --no-floppy --fs-uuid --set=root F430478C304754B0
    fi
    chainloader +1
}
menuentry 'Windows Recovery Environment (loader) (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-CAD0-08A7' {
    insmod part_msdos
    insmod fat
    set root='hd0,msdos2'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  CAD0-08A7
    else
      search --no-floppy --fs-uuid --set=root CAD0-08A7
    fi
    drivemap -s (hd0) ${root}
    chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#16 Le 29/10/2013, à 20:16

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Mon ordi etait sur batterie et il a planté... (comme d'hab)

Ci dessous un copier collé de 2 fichiers log (sys.log et kernel.log) sur le temps de plantage:
sys.log

Oct 29 20:00:34 cisco-1225B kernel: [ 5557.400866] ath: phy0: Unable to set channel
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.412367] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.412383] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.476811] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.592053] ath: phy0: Chip reset failed
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.592063] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.592172] ath: phy0: Unable to set channel
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.603886] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.603904] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.666606] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.782036] ath: phy0: Chip reset failed
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.782046] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.782060] ath: phy0: Unable to set channel
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.793572] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.793589] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.856889] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.971886] ath: phy0: Chip reset failed
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.971896] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.971926] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.799695] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.799721] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.863399] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.977844] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.977855] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.977897] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.989564] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.989592] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.053018] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.168135] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.168146] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.168203] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.180095] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.180112] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.244279] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.359385] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.359395] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.359426] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.372502] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.372520] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.437347] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.552657] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.552666] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.552703] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.564446] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.564465] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.628142] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.743040] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.743049] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.743078] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.754603] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.754619] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.818895] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.933731] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.933741] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.933762] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.945472] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.945490] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.008596] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.123880] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.123889] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.123914] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.135387] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.135403] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.199542] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.314255] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.314265] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.314283] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.325853] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.325871] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.389743] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.505007] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.505017] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.505037] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.516571] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.516587] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.580274] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.695051] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.695060] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.695077] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.706525] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.706540] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.771007] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.886088] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.886097] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.886122] ath: phy0: Unable to set channel
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.897824] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.897841] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.961474] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.076575] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.076584] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.076602] ath: phy0: Unable to set channel
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.088059] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.088077] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.153197] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.268111] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.268120] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.268142] ath: phy0: Unable to set channel
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.279874] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.279893] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.343686] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.458786] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.458796] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.458809] ath: phy0: Unable to set channel
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.470350] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.470367] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.534172] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.648904] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.648913] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.648937] ath: phy0: Unable to set channel
Oct 29 20:04:42 cisco-1225B kernel: imklog 5.8.6, log source = /proc/kmsg started.
Oct 29 20:04:42 cisco-1225B rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="575" x-info="http://www.rsyslog.com"] start
Oct 29 20:04:42 cisco-1225B rsyslogd: rsyslogd's groupid changed to 103
Oct 29 20:04:42 cisco-1225B rsyslogd: rsyslogd's userid changed to 101
Oct 29 20:04:42 cisco-1225B rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ]
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Linux version 3.5.0-42-generic (buildd@lamiak) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #65-Ubuntu SMP Tue Oct 1 23:38:22 UTC 2013 (Ubuntu 3.5.0-42.65-generic 3.5.7.21)
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-42-generic root=UUID=3bc10ab6-fa02-48a8-99b1-8372a3638af8 ro quiet splash i8042.reset i8042.nomux vt.handoff=7
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] KERNEL supported cpus:
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Intel GenuineIntel
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] AMD AuthenticAMD
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Centaur CentaurHauls
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ec5dfff] usable
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ec5e000-0x000000006eca0fff] ACPI NVS
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006eca1000-0x000000006ecb2fff] ACPI data
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecb3000-0x000000006ecb5fff] ACPI NVS



KERN.LOG

ct 29 20:00:22 cisco-1225B kernel: [ 5544.826494] ath: phy0: Unable to set channel
Oct 29 20:00:22 cisco-1225B kernel: [ 5544.838159] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:22 cisco-1225B kernel: [ 5544.838176] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:22 cisco-1225B kernel: [ 5544.902137] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.017108] ath: phy0: Chip reset failed
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.017118] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.017138] ath: phy0: Unable to set channel
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.028590] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.028606] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.093385] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.208202] ath: phy0: Chip reset failed
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.208212] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.208224] ath: phy0: Unable to set channel
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.219854] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.219872] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.283782] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.398821] ath: phy0: Chip reset failed
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.398831] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.398857] ath: phy0: Unable to set channel
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.410327] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.410343] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.474236] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.588833] ath: phy0: Chip reset failed
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.588842] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.588855] ath: phy0: Unable to set channel
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.600452] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.600470] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:22 cisco-1225B kernel: [ 5545.664167] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.779271] ath: phy0: Chip reset failed
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.779281] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.779299] ath: phy0: Unable to set channel
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.790762] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.790778] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.855194] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.969886] ath: phy0: Chip reset failed
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.969895] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.969918] ath: phy0: Unable to set channel
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.981450] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:23 cisco-1225B kernel: [ 5545.981467] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:23 cisco-1225B kernel: [ 5546.045862] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:23 cisco-1225B kernel: [ 5546.160838] ath: phy0: Chip reset failed
Oct 29 20:00:23 cisco-1225B kernel: [ 5546.160847] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:23 cisco-1225B kernel: [ 5546.160869] ath: phy0: Unable to set channel
Oct 29 20:00:28 cisco-1225B kernel: [ 5550.984556] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:28 cisco-1225B kernel: [ 5550.984582] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.049286] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.163865] ath: phy0: Chip reset failed
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.163876] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.163969] ath: phy0: Unable to set channel
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.175783] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.175812] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.239434] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.354082] ath: phy0: Chip reset failed
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.354093] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.354144] ath: phy0: Unable to set channel
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.367258] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.367278] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.430783] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.545696] ath: phy0: Chip reset failed
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.545706] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.545740] ath: phy0: Unable to set channel
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.557501] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.557519] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.620273] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.735892] ath: phy0: Chip reset failed
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.735901] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:28 cisco-1225B kernel: [ 5551.735961] ath: phy0: Unable to set channel
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.747529] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.747546] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.813166] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.928132] ath: phy0: Chip reset failed
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.928141] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.928173] ath: phy0: Unable to set channel
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.929271] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.940249] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:29 cisco-1225B kernel: [ 5551.940270] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.003841] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.119472] ath: phy0: Chip reset failed
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.119481] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.119501] ath: phy0: Unable to set channel
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.131925] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.131945] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.194777] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.309879] ath: phy0: Chip reset failed
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.309888] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.309918] ath: phy0: Unable to set channel
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.321421] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.321438] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.384725] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.499995] ath: phy0: Chip reset failed
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.500033] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.500052] ath: phy0: Unable to set channel
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.514242] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.514271] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.577001] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.692328] ath: phy0: Chip reset failed
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.692337] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.692374] ath: phy0: Unable to set channel
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.704963] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:29 cisco-1225B kernel: [ 5552.704985] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:30 cisco-1225B kernel: [ 5552.768705] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:30 cisco-1225B kernel: [ 5552.883317] ath: phy0: Chip reset failed
Oct 29 20:00:30 cisco-1225B kernel: [ 5552.883326] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:30 cisco-1225B kernel: [ 5552.883353] ath: phy0: Unable to set channel
Oct 29 20:00:30 cisco-1225B kernel: [ 5552.895071] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:30 cisco-1225B kernel: [ 5552.895090] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:30 cisco-1225B kernel: [ 5552.959187] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.074850] ath: phy0: Chip reset failed
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.074860] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.074896] ath: phy0: Unable to set channel
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.088058] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.088076] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.151769] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.266304] ath: phy0: Chip reset failed
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.266313] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.266332] ath: phy0: Unable to set channel
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.277969] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.277987] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.343355] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.458788] ath: phy0: Chip reset failed
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.458797] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.458830] ath: phy0: Unable to set channel
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.470351] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.470367] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.534908] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.649855] ath: phy0: Chip reset failed
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.649864] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.649877] ath: phy0: Unable to set channel
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.661396] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.661414] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:30 cisco-1225B kernel: [ 5553.726683] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:31 cisco-1225B kernel: [ 5553.842060] ath: phy0: Chip reset failed
Oct 29 20:00:31 cisco-1225B kernel: [ 5553.842069] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:31 cisco-1225B kernel: [ 5553.842100] ath: phy0: Unable to set channel
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.111872] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.111899] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.175665] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.290137] ath: phy0: Chip reset failed
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.290148] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.290239] ath: phy0: Unable to set channel
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.301671] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.301688] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.366493] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.481795] ath: phy0: Chip reset failed
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.481805] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.481859] ath: phy0: Unable to set channel
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.493649] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.493668] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.558239] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.673512] ath: phy0: Chip reset failed
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.673521] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.673581] ath: phy0: Unable to set channel
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.685079] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.685096] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:32 cisco-1225B kernel: [ 5555.750185] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:33 cisco-1225B kernel: [ 5555.865321] ath: phy0: Chip reset failed
Oct 29 20:00:33 cisco-1225B kernel: [ 5555.865331] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:33 cisco-1225B kernel: [ 5555.865393] ath: phy0: Unable to set channel
Oct 29 20:00:33 cisco-1225B kernel: [ 5555.877088] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:33 cisco-1225B kernel: [ 5555.877107] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:33 cisco-1225B kernel: [ 5555.941849] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.057212] ath: phy0: Chip reset failed
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.057222] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.057276] ath: phy0: Unable to set channel
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.068774] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.068791] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.134353] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.249338] ath: phy0: Chip reset failed
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.249347] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.249390] ath: phy0: Unable to set channel
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.261112] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.261131] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.325941] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.441479] ath: phy0: Chip reset failed
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.441489] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.441599] ath: phy0: Unable to set channel
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.453077] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.453093] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.517395] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.632383] ath: phy0: Chip reset failed
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.632393] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.632473] ath: phy0: Unable to set channel
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.643999] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.644045] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:33 cisco-1225B kernel: [ 5556.709086] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:34 cisco-1225B kernel: [ 5556.824552] ath: phy0: Chip reset failed
Oct 29 20:00:34 cisco-1225B kernel: [ 5556.824561] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:34 cisco-1225B kernel: [ 5556.824640] ath: phy0: Unable to set channel
Oct 29 20:00:34 cisco-1225B kernel: [ 5556.836161] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:34 cisco-1225B kernel: [ 5556.836178] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:34 cisco-1225B kernel: [ 5556.901582] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.016634] ath: phy0: Chip reset failed
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.016643] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.016717] ath: phy0: Unable to set channel
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.028172] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.028190] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.093764] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.209098] ath: phy0: Chip reset failed
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.209108] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.209156] ath: phy0: Unable to set channel
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.220857] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.220874] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.285630] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.400816] ath: phy0: Chip reset failed
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.400825] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.400866] ath: phy0: Unable to set channel
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.412367] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.412383] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.476811] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.592053] ath: phy0: Chip reset failed
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.592063] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.592172] ath: phy0: Unable to set channel
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.603886] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.603904] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:34 cisco-1225B kernel: [ 5557.666606] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.782036] ath: phy0: Chip reset failed
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.782046] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.782060] ath: phy0: Unable to set channel
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.793572] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.793589] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.856889] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.971886] ath: phy0: Chip reset failed
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.971896] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:35 cisco-1225B kernel: [ 5557.971926] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.799695] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.799721] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.863399] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.977844] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.977855] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.977897] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.989564] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5562.989592] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.053018] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.168135] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.168146] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.168203] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.180095] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.180112] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.244279] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.359385] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.359395] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.359426] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.372502] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.372520] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.437347] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.552657] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.552666] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.552703] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.564446] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.564465] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.628142] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.743040] ath: phy0: Chip reset failed
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.743049] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.743078] ath: phy0: Unable to set channel
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.754603] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:40 cisco-1225B kernel: [ 5563.754619] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.818895] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.933731] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.933741] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.933762] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.945472] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5563.945490] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.008596] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.123880] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.123889] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.123914] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.135387] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.135403] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.199542] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.314255] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.314265] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.314283] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.325853] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.325871] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.389743] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.505007] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.505017] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.505037] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.516571] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.516587] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.580274] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.695051] ath: phy0: Chip reset failed
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.695060] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.695077] ath: phy0: Unable to set channel
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.706525] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:41 cisco-1225B kernel: [ 5564.706540] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.771007] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.886088] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.886097] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.886122] ath: phy0: Unable to set channel
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.897824] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.897841] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5564.961474] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.076575] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.076584] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.076602] ath: phy0: Unable to set channel
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.088059] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.088077] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.153197] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.268111] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.268120] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.268142] ath: phy0: Unable to set channel
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.279874] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.279893] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.343686] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.458786] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.458796] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.458809] ath: phy0: Unable to set channel
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.470350] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.470367] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.534172] ath: phy0: Failed to stop TX DMA, queues=0x10f!
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.648904] ath: phy0: Chip reset failed
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.648913] ath: phy0: Unable to reset channel, reset status -22
Oct 29 20:00:42 cisco-1225B kernel: [ 5565.648937] ath: phy0: Unable to set channel
Oct 29 20:04:42 cisco-1225B kernel: imklog 5.8.6, log source = /proc/kmsg started.
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Linux version 3.5.0-42-generic (buildd@lamiak) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #65-Ubuntu SMP Tue Oct 1 23:38:22 UTC 2013 (Ubuntu 3.5.0-42.65-generic 3.5.7.21)
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-42-generic root=UUID=3bc10ab6-fa02-48a8-99b1-8372a3638af8 ro quiet splash i8042.reset i8042.nomux vt.handoff=7
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] KERNEL supported cpus:
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Intel GenuineIntel
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] AMD AuthenticAMD
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] Centaur CentaurHauls
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ec5dfff] usable
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ec5e000-0x000000006eca0fff] ACPI NVS
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006eca1000-0x000000006ecb2fff] ACPI data
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecb3000-0x000000006ecb5fff] ACPI NVS
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecb6000-0x000000006ecb8fff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecb9000-0x000000006ecc0fff] ACPI NVS
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecc1000-0x000000006ecdafff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecdb000-0x000000006ecdbfff] usable
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecdc000-0x000000006ecebfff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecec000-0x000000006ecf5fff] ACPI NVS
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ecf6000-0x000000006ed03fff] usable
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ed04000-0x000000006ed05fff] ACPI NVS
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ed06000-0x000000006ed07fff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ed08000-0x000000006ed0ffff] ACPI NVS
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ed10000-0x000000006ed44fff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ed45000-0x000000006ed87fff] ACPI NVS
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x000000006ed88000-0x000000006eefffff] usable
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Oct 29 20:04:42 cisco-1225B kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved

Esperant que quel qu un pourra m aider avec ca...
Merci


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#17 Le 30/10/2013, à 01:36

renaud07

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Salut,

J'ai aussi un asus 1225B et je peux t'aider. Alors la modification de grub règle le problème de gel du clavier/touchpad au démarrage et pour ce qui est du gel aléatoire sur batterie il est réglé avec un kernel plus récent qui est le 3.8 que tu peux installer sur la 12.04 (que je te conseil à la place de la 12.10) en faisant simplement :

 sudo apt-get install linux-generic-lts-raring xserver-xorg-lts-raring

Voir : http://doc.ubuntu-fr.org/ltsenablementstack

Un redémarrage et te voilà débarrassé de ces vilains gels wink


-AMD FX 8350 4,6 Ghz - Asus M5A97 R2.0 - nVidia GT610 - 8 Go RAM - 500 Go/1 To - dualboot Ubuntu  cinnamon 14.04 64 bits/windows 7 64 bits
-Dell vostro 3550 - Intel core i5 2410M 2.30Ghz  - HD Gaphics 3000 - 4Go RAM - 320Go - dualboot Xubuntu 14.04 64 bits/windows 7 64 bits
-Asus Eee PC 1225B - AMD C-60 1 Ghz - 4Go RAM - 500Go - dualboot Xubuntu 14.04 64 bits/windows 7 64 bits

Hors ligne

#18 Le 30/10/2013, à 08:21

The Uploader

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Merci renaud07. smile
J'ai aussi un 1225B chez moi mais il n'est pas à moi et il est uniquement sous Windows 7 x64. hmm
A part ses problèmes sous GNU/Linux (le plus "grave" étant de ne pas profiter du décodage des vidéos par la CG, chose possible sous Windows), c'est une chouette petite machine.

Dernière modification par The Uploader (Le 30/10/2013, à 08:23)


Passer de Ubuntu 10.04 à Xubuntu 12.04 LTS
ASUS N56VV (UEFI + GPT, Core i5-3230M @ 2.60GHz, Intel HD4000 + GeForce 750M, 12 Go de RAM, SSD 1 To)
Système principal : Archlinux (amd64), avec KDE 4
Système oublié la plupart du temps : Windows 8.1 Update 1 (x64, OEM)

Hors ligne

#19 Le 30/10/2013, à 08:58

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Super!
Merci les gars, et big up renaud07

° Peut on installer ce Kernel avec la 12.10?

Je me renseigne en parallele sur le forum Xubuntu, si j ai une solution en gardant la 12.10, je mettrai le lien.
Si je ne trouve pas (a l aide de gars comme vous) la solution, je ferai la manip.->peut etre que je ne pourrai pas attendre..;)
(pour info:http://xubuntu.fr/forum/viewtopic.php?f=2&t=2165&p=3857#p3857)

° Comment fait on sinon pour passer de la 12.10 a la 12.04LTS?

Merci encore!! IN XUBUNTU WE TRUST!!

J ai par ailleurs 2 autres petites interrogations:
1/ Sur les 4Go, seul 3Go sont utilisés...... Pourquoi?
2/ Le processeur tourne plus souvent en 800Mhz qu a 1000, Pourquoi?

J ai fouillé, j ai trouvé des cas identiques mais pas de solution..j ai peut etre mal cherché?

Merci encore. big_smile  wink  lol  cool


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#20 Le 31/10/2013, à 09:55

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Salut,
J ai installé hier soir la 12.04LTS (XUBUNTU) puis modifié le GRUB (cf plus haut) puis installé le KERNEL 3.8.
Redémarré, débranché la batterie... Ca marche...... quelques minutes puis ca freeze comme d hab:(
Ci dessous extrait de KERN.LOG au moment du plantage:

Oct 31 00:00:10 cisco-1225B kernel: [   21.982825] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
Oct 31 00:00:10 cisco-1225B kernel: [   21.983008] sp5100_tco: PCI Revision ID: 0x42
Oct 31 00:00:10 cisco-1225B kernel: [   21.983065] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
Oct 31 00:00:10 cisco-1225B kernel: [   21.983081] sp5100_tco: Last reboot was not triggered by watchdog.
Oct 31 00:00:10 cisco-1225B kernel: [   21.983737] sp5100_tco: initialized (0xffffc90010458b00). heartbeat=60 sec (nowayout=0)
Oct 31 00:00:10 cisco-1225B kernel: [   22.008427] [drm] radeon atom DIG backlight initialized
Oct 31 00:00:10 cisco-1225B kernel: [   22.008447] [drm] Radeon Display Connectors
Oct 31 00:00:10 cisco-1225B kernel: [   22.008453] [drm] Connector 0:
Oct 31 00:00:10 cisco-1225B kernel: [   22.008461] [drm]   LVDS-1
Oct 31 00:00:10 cisco-1225B kernel: [   22.008465] [drm]   HPD1
Oct 31 00:00:10 cisco-1225B kernel: [   22.008473] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
Oct 31 00:00:10 cisco-1225B kernel: [   22.008478] [drm]   Encoders:
Oct 31 00:00:10 cisco-1225B kernel: [   22.008483] [drm]     LCD1: INTERNAL_UNIPHY
Oct 31 00:00:10 cisco-1225B kernel: [   22.008487] [drm] Connector 1:
Oct 31 00:00:10 cisco-1225B kernel: [   22.008492] [drm]   HDMI-A-1
Oct 31 00:00:10 cisco-1225B kernel: [   22.008496] [drm]   HPD2
Oct 31 00:00:10 cisco-1225B kernel: [   22.008503] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
Oct 31 00:00:10 cisco-1225B kernel: [   22.008507] [drm]   Encoders:
Oct 31 00:00:10 cisco-1225B kernel: [   22.008511] [drm]     DFP1: INTERNAL_UNIPHY
Oct 31 00:00:10 cisco-1225B kernel: [   22.008515] [drm] Connector 2:
Oct 31 00:00:10 cisco-1225B kernel: [   22.008520] [drm]   VGA-1
Oct 31 00:00:10 cisco-1225B kernel: [   22.008528] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
Oct 31 00:00:10 cisco-1225B kernel: [   22.008531] [drm]   Encoders:
Oct 31 00:00:10 cisco-1225B kernel: [   22.008536] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
Oct 31 00:00:10 cisco-1225B kernel: [   22.008634] [drm] Internal thermal controller without fan control
Oct 31 00:00:10 cisco-1225B kernel: [   22.008810] [drm] radeon: power management initialized
Oct 31 00:00:10 cisco-1225B kernel: [   22.037302] Linux video capture interface: v2.00
Oct 31 00:00:10 cisco-1225B kernel: [   22.041593] microcode: CPU0: patch_level=0x0500010d
Oct 31 00:00:10 cisco-1225B kernel: [   22.116026] microcode: CPU0: new patch_level=0x05000119
Oct 31 00:00:10 cisco-1225B kernel: [   22.122844] microcode: CPU1: patch_level=0x0500010d
Oct 31 00:00:10 cisco-1225B kernel: [   22.124044] microcode: CPU1: new patch_level=0x05000119
Oct 31 00:00:10 cisco-1225B kernel: [   22.133783] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Oct 31 00:00:10 cisco-1225B kernel: [   22.188158] cfg80211: Calling CRDA to update world regulatory domain
Oct 31 00:00:11 cisco-1225B kernel: [   22.259507] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5716)
Oct 31 00:00:11 cisco-1225B kernel: [   22.278542] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input7
Oct 31 00:00:11 cisco-1225B kernel: [   22.278987] usbcore: registered new interface driver uvcvideo
Oct 31 00:00:11 cisco-1225B kernel: [   22.278994] USB Video Class driver (1.1.1)
Oct 31 00:00:11 cisco-1225B kernel: [   22.450098] kvm: Nested Virtualization enabled
Oct 31 00:00:11 cisco-1225B kernel: [   22.450113] kvm: Nested Paging enabled
Oct 31 00:00:11 cisco-1225B kernel: [   22.564573] [drm] fb mappable at 0xC0142000
Oct 31 00:00:11 cisco-1225B kernel: [   22.564585] [drm] vram apper at 0xC0000000
Oct 31 00:00:11 cisco-1225B kernel: [   22.564591] [drm] size 4325376
Oct 31 00:00:11 cisco-1225B kernel: [   22.564596] [drm] fb depth is 24
Oct 31 00:00:11 cisco-1225B kernel: [   22.564601] [drm]    pitch is 5632
Oct 31 00:00:11 cisco-1225B kernel: [   22.577000] fbcon: radeondrmfb (fb0) is primary device
Oct 31 00:00:11 cisco-1225B kernel: [   22.839720] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 652694
Oct 31 00:00:11 cisco-1225B kernel: [   22.876460] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
Oct 31 00:00:11 cisco-1225B kernel: [   22.895464] type=1400 audit(1383174011.648:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=859 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.906741] type=1400 audit(1383174011.660:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=858 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.907955] type=1400 audit(1383174011.660:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=858 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.913502] type=1400 audit(1383174011.668:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=859 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.914377] type=1400 audit(1383174011.668:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=859 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.923220] ath: phy0: ASPM enabled: 0x43
Oct 31 00:00:11 cisco-1225B kernel: [   22.923227] ath: EEPROM regdomain: 0x60
Oct 31 00:00:11 cisco-1225B kernel: [   22.923228] ath: EEPROM indicates we should expect a direct regpair map
Oct 31 00:00:11 cisco-1225B kernel: [   22.923234] ath: Country alpha2 being used: 00
Oct 31 00:00:11 cisco-1225B kernel: [   22.923236] ath: Regpair used: 0x60
Oct 31 00:00:11 cisco-1225B kernel: [   23.000341] Console: switching to colour frame buffer device 170x48
Oct 31 00:00:11 cisco-1225B kernel: [   23.010070] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
Oct 31 00:00:11 cisco-1225B kernel: [   23.010075] radeon 0000:00:01.0: registered panic notifier
Oct 31 00:00:11 cisco-1225B kernel: [   23.084145] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
Oct 31 00:00:11 cisco-1225B kernel: [   23.085141] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
Oct 31 00:00:11 cisco-1225B kernel: [   23.167205] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
Oct 31 00:00:11 cisco-1225B kernel: [   23.171159] r8169 0000:05:00.0 eth0: link down
Oct 31 00:00:11 cisco-1225B kernel: [   23.175540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 31 00:00:11 cisco-1225B kernel: [   23.176971] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 31 00:00:11 cisco-1225B kernel: [   23.172844] asus_wmi: ASUS WMI generic driver loaded
Oct 31 00:00:11 cisco-1225B kernel: [   23.182035] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 1.6
Oct 31 00:00:11 cisco-1225B kernel: [   23.182374] asus_wmi: SFUN value: 0x30<6>[   23.202358] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
Oct 31 00:00:12 cisco-1225B kernel: [   23.262061] asus_wmi: Backlight controlled by ACPI video driver
Oct 31 00:00:12 cisco-1225B kernel: [   23.265924] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
Oct 31 00:00:12 cisco-1225B kernel: [   23.269090] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
Oct 31 00:00:12 cisco-1225B kernel: [   23.278415] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Oct 31 00:00:12 cisco-1225B kernel: [   23.286337] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010780000, irq=17
Oct 31 00:00:12 cisco-1225B kernel: [   23.910363] cfg80211: World regulatory domain updated:
Oct 31 00:00:12 cisco-1225B kernel: [   23.910379] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910387] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910394] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910401] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910407] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910414] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:13 cisco-1225B kernel: [   24.253885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 31 00:00:13 cisco-1225B kernel: [   24.263225] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 31 00:00:16 cisco-1225B kernel: [   27.271625] wlan0: authenticate with 86:7d:ce:49:9a:6c
Oct 31 00:00:16 cisco-1225B kernel: [   27.278996] wlan0: send auth to 86:7d:ce:49:9a:6c (try 1/3)
Oct 31 00:00:16 cisco-1225B kernel: [   27.281471] wlan0: authenticated
Oct 31 00:00:16 cisco-1225B kernel: [   27.284243] wlan0: associate with 86:7d:ce:49:9a:6c (try 1/3)
Oct 31 00:00:16 cisco-1225B kernel: [   27.293509] wlan0: RX AssocResp from 86:7d:ce:49:9a:6c (capab=0x411 status=0 aid=2)
Oct 31 00:00:16 cisco-1225B kernel: [   27.293634] wlan0: associated
Oct 31 00:00:16 cisco-1225B kernel: [   27.293712] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Oct 31 00:00:25 cisco-1225B kernel: [   36.757785] audit_printk_skb: 33 callbacks suppressed
Oct 31 00:00:25 cisco-1225B kernel: [   36.757798] type=1400 audit(1383174025.513:23): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=669 comm="cupsd" pid=669 comm="cupsd" capability=36  capname="block_suspend"
Oct 31 09:38:43 cisco-1225B kernel: imklog 5.8.6, log source = /proc/kmsg started.
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] Initializing cgroup subsys cpu
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] Linux version 3.8.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 (Ubuntu 3.8.0-32.47~precise1-generic 3.8.13.10)
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-32-generic root=UUID=f163f030-dbf0-4bbe-ab1d-b56b0e1d9003 ro quiet splash i8042.reset i8042.nomux vt.handoff=7
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] KERNEL supported cpus:
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000]   Intel GenuineIntel
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000]   AMD AuthenticAMD
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000]   Centaur CentaurHauls
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] e820: BIOS-provided physical RAM map:


de SYS.LOG

Oct 31 00:00:11 cisco-1225B kernel: [   22.450113] kvm: Nested Paging enabled
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  ModemManager (version 0.5.2.0) starting...
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Generic
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Novatel
Oct 31 00:00:11 cisco-1225B kernel: [   22.564573] [drm] fb mappable at 0xC0142000
Oct 31 00:00:11 cisco-1225B kernel: [   22.564585] [drm] vram apper at 0xC0000000
Oct 31 00:00:11 cisco-1225B kernel: [   22.564591] [drm] size 4325376
Oct 31 00:00:11 cisco-1225B kernel: [   22.564596] [drm] fb depth is 24
Oct 31 00:00:11 cisco-1225B kernel: [   22.564601] [drm]    pitch is 5632
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Linktop
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Samsung
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Wavecom
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin MotoC
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin AnyData
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin X22X
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Sierra
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Longcheer
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Huawei
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Gobi
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> NetworkManager (version 0.9.4.0) is starting...
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Option
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin ZTE
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Option High-Speed
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin SimTech
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Ericsson MBM
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> DNS: loaded plugin dnsmasq
Oct 31 00:00:11 cisco-1225B modem-manager[810]: <info>  Loaded plugin Nokia
Oct 31 00:00:11 cisco-1225B dbus[525]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Oct 31 00:00:11 cisco-1225B polkitd[827]: started daemon version 0.104 using authority implementation `local' version `0.104'
Oct 31 00:00:11 cisco-1225B dbus[525]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: init!
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: update_system_hostname
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPluginIfupdown: management mode: unmanaged
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:15.3/0000:05:00.0/net/eth0, iface: eth0)
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:15.3/0000:05:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: end _init.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    Ifupdown: get unmanaged devices count: 0
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: (12324000) ... get_connections.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: (12324000) ... get_connections (managed=false): return empty list.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    keyfile: parsing freebox_IWEEUK ...
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    keyfile:     read connection 'freebox_IWEEUK'
Oct 31 00:00:11 cisco-1225B NetworkManager[819]:    Ifupdown: get unmanaged devices count: 0
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> modem-manager is now available
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> monitoring kernel firmware directory '/lib/firmware'.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> WiFi enabled by radio killswitch; enabled by state file
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> WWAN enabled by radio killswitch; enabled by state file
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> WiMAX enabled by radio killswitch; enabled by state file
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> Networking is enabled by state file
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <warn> failed to allocate link cache: (-10) Operation not supported
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> (eth0): carrier is OFF
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> (eth0): new Ethernet device (driver: 'r8169' ifindex: 2)
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> (eth0): now managed
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> (eth0): bringing up device.
Oct 31 00:00:11 cisco-1225B kernel: [   22.577000] fbcon: radeondrmfb (fb0) is primary device
Oct 31 00:00:11 cisco-1225B kernel: [   22.839720] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 652694
Oct 31 00:00:11 cisco-1225B kernel: [   22.876460] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
Oct 31 00:00:11 cisco-1225B kernel: [   22.895464] type=1400 audit(1383174011.648:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=859 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.906741] type=1400 audit(1383174011.660:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=858 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.907955] type=1400 audit(1383174011.660:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=858 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.913502] type=1400 audit(1383174011.668:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=859 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.914377] type=1400 audit(1383174011.668:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=859 comm="apparmor_parser"
Oct 31 00:00:11 cisco-1225B kernel: [   22.923220] ath: phy0: ASPM enabled: 0x43
Oct 31 00:00:11 cisco-1225B kernel: [   22.923227] ath: EEPROM regdomain: 0x60
Oct 31 00:00:11 cisco-1225B kernel: [   22.923228] ath: EEPROM indicates we should expect a direct regpair map
Oct 31 00:00:11 cisco-1225B kernel: [   22.923234] ath: Country alpha2 being used: 00
Oct 31 00:00:11 cisco-1225B kernel: [   22.923236] ath: Regpair used: 0x60
Oct 31 00:00:11 cisco-1225B kernel: [   23.000341] Console: switching to colour frame buffer device 170x48
Oct 31 00:00:11 cisco-1225B kernel: [   23.010070] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
Oct 31 00:00:11 cisco-1225B kernel: [   23.010075] radeon 0000:00:01.0: registered panic notifier
Oct 31 00:00:11 cisco-1225B udev-configure-printer: add /module/lp
Oct 31 00:00:11 cisco-1225B udev-configure-printer: Failed to get parent
Oct 31 00:00:11 cisco-1225B kernel: [   23.084145] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
Oct 31 00:00:11 cisco-1225B kernel: [   23.085141] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
Oct 31 00:00:11 cisco-1225B kernel: [   23.167205] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
Oct 31 00:00:11 cisco-1225B kernel: [   23.171159] r8169 0000:05:00.0 eth0: link down
Oct 31 00:00:11 cisco-1225B kernel: [   23.175540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> (eth0): preparing device.
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> (eth0): deactivating device (reason 'managed') [2]
Oct 31 00:00:11 cisco-1225B NetworkManager[819]: <info> Added default wired connection 'Connexion filaire 1' for /sys/devices/pci0000:00/0000:00:15.3/0000:05:00.0/net/eth0
Oct 31 00:00:11 cisco-1225B kernel: [   23.176971] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 31 00:00:11 cisco-1225B kernel: [   23.172844] asus_wmi: ASUS WMI generic driver loaded
Oct 31 00:00:11 cisco-1225B kernel: [   23.182035] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 1.6
Oct 31 00:00:11 cisco-1225B kernel: [   23.182374] asus_wmi: SFUN value: 0x30<6>[   23.202358] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
Oct 31 00:00:12 cisco-1225B kernel: [   23.262061] asus_wmi: Backlight controlled by ACPI video driver
Oct 31 00:00:12 cisco-1225B kernel: [   23.265924] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
Oct 31 00:00:12 cisco-1225B kernel: [   23.269090] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
Oct 31 00:00:12 cisco-1225B kernel: [   23.278415] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Oct 31 00:00:12 cisco-1225B kernel: [   23.286337] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010780000, irq=17
Oct 31 00:00:12 cisco-1225B anacron[1001]: Anacron 2.3 started on 2013-10-31
Oct 31 00:00:12 cisco-1225B acpid: starting up with proc fs
Oct 31 00:00:12 cisco-1225B cron[969]: (CRON) INFO (pidfile fd = 3)
Oct 31 00:00:12 cisco-1225B acpid: 35 rules loaded
Oct 31 00:00:12 cisco-1225B acpid: waiting for events: event logging is off
Oct 31 00:00:12 cisco-1225B anacron[1001]: Will run job `cron.daily' in 5 min.
Oct 31 00:00:12 cisco-1225B anacron[1001]: Jobs will be executed sequentially
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <info> found WiFi radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:15.1/0000:04:00.0/ieee80211/phy0/rfkill0) (driver (unknown))
Oct 31 00:00:12 cisco-1225B cron[1022]: (CRON) STARTUP (fork ok)
Oct 31 00:00:12 cisco-1225B cron[1022]: (CRON) INFO (Running @reboot jobs)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910363] cfg80211: World regulatory domain updated:
Oct 31 00:00:12 cisco-1225B kernel: [   23.910379] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910387] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910394] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910401] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910407] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B kernel: [   23.910414] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <info> found WiFi radio killswitch rfkill1 (at /sys/devices/platform/eeepc-wmi/rfkill/rfkill1) (driver eeepc-wmi)
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <info> (wlan0): using nl80211 for WiFi device control
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <warn> (wlan0): driver supports Access Point (AP) mode
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <info> (wlan0): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3)
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <info> (wlan0): now managed
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Oct 31 00:00:12 cisco-1225B NetworkManager[819]: <info> (wlan0): bringing up device.
Oct 31 00:00:13 cisco-1225B NetworkManager[819]: <info> (wlan0): preparing device.
Oct 31 00:00:13 cisco-1225B kernel: [   24.253885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 31 00:00:13 cisco-1225B NetworkManager[819]: <info> (wlan0): deactivating device (reason 'managed') [2]
Oct 31 00:00:13 cisco-1225B kernel: [   24.263225] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 31 00:00:13 cisco-1225B dbus[525]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
Oct 31 00:00:13 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:15.1/0000:04:00.0/net/wlan0, iface: wlan0)
Oct 31 00:00:13 cisco-1225B NetworkManager[819]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:15.1/0000:04:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Oct 31 00:00:13 cisco-1225B dbus[525]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Oct 31 00:00:13 cisco-1225B NetworkManager[819]: <info> wpa_supplicant started
Oct 31 00:00:13 cisco-1225B NetworkManager[819]: <info> (wlan0): supplicant interface state: starting -> ready
Oct 31 00:00:13 cisco-1225B NetworkManager[819]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Oct 31 00:00:13 cisco-1225B NetworkManager[819]: <info> (wlan0): supplicant interface state: ready -> inactive
Oct 31 00:00:13 cisco-1225B NetworkManager[819]: <warn> Trying to remove a non-existant call id.
Oct 31 00:00:13 cisco-1225B acpid: client connected from 1089[0:0]
Oct 31 00:00:13 cisco-1225B acpid: 1 client rule loaded
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Auto-activating connection 'freebox_IWEEUK'.
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) starting connection 'freebox_IWEEUK'
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Activation (wlan0/wireless): connection 'freebox_IWEEUK' has security, and secrets exist.  No new secrets needed.
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Config: added 'ssid' value 'freebox_IWEEUK'
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Config: added 'scan_ssid' value '1'
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Config: added 'auth_alg' value 'OPEN'
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Config: added 'psk' value '<omitted>'
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Oct 31 00:00:14 cisco-1225B NetworkManager[819]: <info> Config: set interface ap_scan to 1
Oct 31 00:00:15 cisco-1225B NetworkManager[819]: <info> (wlan0): supplicant interface state: inactive -> scanning
Oct 31 00:00:15 cisco-1225B dbus[525]: [system] Activating service name='org.freedesktop.Accounts' (using servicehelper)
Oct 31 00:00:15 cisco-1225B dbus[525]: [system] Successfully activated service 'org.freedesktop.Accounts'
Oct 31 00:00:15 cisco-1225B accounts-daemon[1259]: started daemon version 0.6.15
Oct 31 00:00:15 cisco-1225B dbus[525]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Oct 31 00:00:15 cisco-1225B dbus[525]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Oct 31 00:00:16 cisco-1225B wpa_supplicant[1071]: Trying to authenticate with 86:7d:ce:49:9a:6c (SSID='freebox_IWEEUK' freq=2412 MHz)
Oct 31 00:00:16 cisco-1225B kernel: [   27.271625] wlan0: authenticate with 86:7d:ce:49:9a:6c
Oct 31 00:00:16 cisco-1225B kernel: [   27.278996] wlan0: send auth to 86:7d:ce:49:9a:6c (try 1/3)
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Oct 31 00:00:16 cisco-1225B wpa_supplicant[1071]: Trying to associate with 86:7d:ce:49:9a:6c (SSID='freebox_IWEEUK' freq=2412 MHz)
Oct 31 00:00:16 cisco-1225B kernel: [   27.281471] wlan0: authenticated
Oct 31 00:00:16 cisco-1225B kernel: [   27.284243] wlan0: associate with 86:7d:ce:49:9a:6c (try 1/3)
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> (wlan0): supplicant interface state: authenticating -> associating
Oct 31 00:00:16 cisco-1225B wpa_supplicant[1071]: Associated with 86:7d:ce:49:9a:6c
Oct 31 00:00:16 cisco-1225B kernel: [   27.293509] wlan0: RX AssocResp from 86:7d:ce:49:9a:6c (capab=0x411 status=0 aid=2)
Oct 31 00:00:16 cisco-1225B kernel: [   27.293634] wlan0: associated
Oct 31 00:00:16 cisco-1225B kernel: [   27.293712] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> (wlan0): supplicant interface state: associating -> associated
Oct 31 00:00:16 cisco-1225B dbus[525]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Oct 31 00:00:16 cisco-1225B dbus[525]: [system] Successfully activated service 'org.freedesktop.UPower'
Oct 31 00:00:16 cisco-1225B wpa_supplicant[1071]: WPA: Key negotiation completed with 86:7d:ce:49:9a:6c [PTK=CCMP GTK=TKIP]
Oct 31 00:00:16 cisco-1225B wpa_supplicant[1071]: CTRL-EVENT-CONNECTED - Connection to 86:7d:ce:49:9a:6c completed (auth) [id=0 id_str=]
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> (wlan0): supplicant interface state: associated -> group handshake
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> (wlan0): supplicant interface state: group handshake -> completed
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'freebox_IWEEUK'.
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> dhclient started with pid 1409
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Beginning IP6 addrconf.
Oct 31 00:00:16 cisco-1225B dhclient: Internet Systems Consortium DHCP Client 4.1-ESV-R4
Oct 31 00:00:16 cisco-1225B dhclient: Copyright 2004-2011 Internet Systems Consortium.
Oct 31 00:00:16 cisco-1225B dhclient: All rights reserved.
Oct 31 00:00:16 cisco-1225B dhclient: For info, please visit https://www.isc.org/software/dhcp/
Oct 31 00:00:16 cisco-1225B dhclient:
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Oct 31 00:00:16 cisco-1225B dhclient: Listening on LPF/wlan0/44:6d:57:ec:c2:68
Oct 31 00:00:16 cisco-1225B dhclient: Sending on   LPF/wlan0/44:6d:57:ec:c2:68
Oct 31 00:00:16 cisco-1225B dhclient: Sending on   Socket/fallback
Oct 31 00:00:16 cisco-1225B dhclient: DHCPREQUEST of 192.168.0.13 on wlan0 to 255.255.255.255 port 67
Oct 31 00:00:16 cisco-1225B dhclient: DHCPACK of 192.168.0.13 from 192.168.0.254
Oct 31 00:00:16 cisco-1225B dhclient: bound to 192.168.0.13 -- renewal in 417198 seconds.
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info>   address 192.168.0.13
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info>   prefix 24 (255.255.255.0)
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info>   gateway 192.168.0.254
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info>   nameserver '212.27.40.241'
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info>   nameserver '212.27.40.240'
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Oct 31 00:00:16 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) started...
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <info> DNS: starting dnsmasq...
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <error> [1383174017.660205] [nm-dns-dnsmasq.c:393] update(): dnsmasq not available on the bus, can't update servers.
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <error> [1383174017.660332] [nm-dns-dnsmasq.c:395] update(): dnsmasq owner not found on bus: Could not get owner of name 'uk.org.thekelleys.dnsmasq': no such name
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <warn> DNS: plugin dnsmasq update failed
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <info> (wlan0): writing resolv.conf to /sbin/resolvconf
Oct 31 00:00:17 cisco-1225B dnsmasq[1533]: démarrage avec le cache désactivé (version 2.59)
Oct 31 00:00:17 cisco-1225B dnsmasq[1533]: options à la compilation : IPv6 GNU-getopt DBus i18n DHCP TFTP conntrack IDN
Oct 31 00:00:17 cisco-1225B dnsmasq[1533]: Support DBus autorisé : connecté au bus système
Oct 31 00:00:17 cisco-1225B dnsmasq[1533]: attention : aucun serveur amont n'est configuré
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <info> Policy set 'freebox_IWEEUK' (wlan0) as default for IPv4 routing and DNS.
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) successful, device activated.
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Oct 31 00:00:17 cisco-1225B dbus[525]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <warn> dnsmasq appeared on DBus: :1.20
Oct 31 00:00:17 cisco-1225B NetworkManager[819]: <info> (wlan0): writing resolv.conf to /sbin/resolvconf
Oct 31 00:00:17 cisco-1225B dnsmasq[1533]: configuration des serveurs amonts à partir de DBus
Oct 31 00:00:17 cisco-1225B dnsmasq[1533]: utilise le serveur de nom 212.27.40.240#53
Oct 31 00:00:17 cisco-1225B dnsmasq[1533]: utilise le serveur de nom 212.27.40.241#53
Oct 31 00:00:17 cisco-1225B dbus[525]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 31 00:00:21 cisco-1225B dbus[525]: [system] Activating service name='org.freedesktop.RealtimeKit1' (using servicehelper)
Oct 31 00:00:21 cisco-1225B dbus[525]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Successfully called chroot.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Successfully dropped privileges.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Successfully limited resources.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Running.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Canary thread running.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Watchdog thread running.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Successfully made thread 1778 of process 1778 (n/a) owned by '1000' high priority at nice level -11.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Supervising 1 threads of 1 processes of 1 users.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Successfully made thread 1788 of process 1778 (n/a) owned by '1000' RT at priority 5.
Oct 31 00:00:21 cisco-1225B rtkit-daemon[1780]: Supervising 2 threads of 1 processes of 1 users.
Oct 31 00:00:21 cisco-1225B dbus[525]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Oct 31 00:00:22 cisco-1225B dbus[525]: [system] Successfully activated service 'org.freedesktop.UDisks'
Oct 31 00:00:22 cisco-1225B rtkit-daemon[1780]: Successfully made thread 1793 of process 1778 (n/a) owned by '1000' RT at priority 5.
Oct 31 00:00:22 cisco-1225B rtkit-daemon[1780]: Supervising 3 threads of 1 processes of 1 users.
Oct 31 00:00:22 cisco-1225B rtkit-daemon[1780]: Successfully made thread 1797 of process 1778 (n/a) owned by '1000' RT at priority 5.
Oct 31 00:00:22 cisco-1225B rtkit-daemon[1780]: Supervising 4 threads of 1 processes of 1 users.
Oct 31 00:00:22 cisco-1225B rtkit-daemon[1780]: Successfully made thread 1804 of process 1804 (n/a) owned by '1000' high priority at nice level -11.
Oct 31 00:00:22 cisco-1225B rtkit-daemon[1780]: Supervising 5 threads of 2 processes of 1 users.
Oct 31 00:00:22 cisco-1225B pulseaudio[1804]: [pulseaudio] pid.c: Daemon already running.
Oct 31 00:00:25 cisco-1225B kernel: [   36.757785] audit_printk_skb: 33 callbacks suppressed
Oct 31 00:00:25 cisco-1225B kernel: [   36.757798] type=1400 audit(1383174025.513:23): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=669 comm="cupsd" pid=669 comm="cupsd" capability=36  capname="block_suspend"
Oct 31 00:00:25 cisco-1225B dbus[525]: [system] Activating service name='org.blueman.Mechanism' (using servicehelper)
Oct 31 00:00:26 cisco-1225B blueman-mechanism: Starting blueman-mechanism
Oct 31 00:00:26 cisco-1225B dbus[525]: [system] Successfully activated service 'org.blueman.Mechanism'
Oct 31 00:00:26 cisco-1225B blueman-mechanism: loading Config
Oct 31 00:00:26 cisco-1225B blueman-mechanism: loading Network
Oct 31 00:00:26 cisco-1225B blueman-mechanism: loading Ppp
Oct 31 00:00:26 cisco-1225B blueman-mechanism: loading RfKill
Oct 31 00:00:26 cisco-1225B ntpdate[1636]: adjust time server 91.189.89.199 offset 0.081388 sec
Oct 31 00:00:36 cisco-1225B NetworkManager[819]: <info> (wlan0): IP6 addrconf timed out or failed.
Oct 31 00:00:36 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Oct 31 00:00:36 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Oct 31 00:00:36 cisco-1225B NetworkManager[819]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Oct 31 00:00:56 cisco-1225B blueman-mechanism: Exiting
Oct 31 00:03:15 cisco-1225B ntfs-3g[2034]: Version 2012.1.15AR.1 external FUSE 28
Oct 31 00:03:15 cisco-1225B ntfs-3g[2034]: Mounted /dev/sda1 (Read-Write, label "WIN7 OS", NTFS 3.1)
Oct 31 00:03:15 cisco-1225B ntfs-3g[2034]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177
Oct 31 00:03:15 cisco-1225B ntfs-3g[2034]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sda1,blkdev,blksize=4096
Oct 31 00:03:15 cisco-1225B ntfs-3g[2034]: Global ownership and permissions enforced, configuration type 7
Oct 31 00:03:24 cisco-1225B ntfs-3g[2052]: Version 2012.1.15AR.1 external FUSE 28
Oct 31 00:03:24 cisco-1225B ntfs-3g[2052]: Mounted /dev/sda5 (Read-Write, label "DOCUMENTS", NTFS 3.1)
Oct 31 00:03:24 cisco-1225B ntfs-3g[2052]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177
Oct 31 00:03:24 cisco-1225B ntfs-3g[2052]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sda5,blkdev,blksize=4096
Oct 31 00:03:24 cisco-1225B ntfs-3g[2052]: Global ownership and permissions enforced, configuration type 7
Oct 31 00:04:45 cisco-1225B acpid: client 1089[0:0] has disconnected
Oct 31 00:04:45 cisco-1225B acpid: client connected from 1089[0:0]
Oct 31 00:04:45 cisco-1225B acpid: 1 client rule loaded
Oct 31 09:38:43 cisco-1225B kernel: imklog 5.8.6, log source = /proc/kmsg started.
Oct 31 09:38:43 cisco-1225B rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="651" x-info="http://www.rsyslog.com"] start
Oct 31 09:38:43 cisco-1225B rsyslogd: rsyslogd's groupid changed to 103
Oct 31 09:38:43 cisco-1225B rsyslogd: rsyslogd's userid changed to 101
Oct 31 09:38:43 cisco-1225B rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ]
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] Initializing cgroup subsys cpu
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] Linux version 3.8.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 (Ubuntu 3.8.0-32.47~precise1-generic 3.8.13.10)
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-32-generic root=UUID=f163f030-dbf0-4bbe-ab1d-b56b0e1d9003 ro quiet splash i8042.reset i8042.nomux vt.handoff=7
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] KERNEL supported cpus:
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000]   Intel GenuineIntel
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000]   AMD AuthenticAMD
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000]   Centaur CentaurHauls
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
Oct 31 09:38:43 cisco-1225B kernel: [    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved

Voila, espérant que quelqu un pourra m aider. Merci
Pour rappel, le plantage bloque tout, y cis l heure, souris, clavier, image....Seule solution, rebooter avec le bouton


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#21 Le 31/10/2013, à 12:57

renaud07

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Oula c'est vraiment bizarre moi ça a réglé le problème immédiatement alors que souvent quand j'étais sur batt' ça bugait au bout de quelques minutes... là je peux y rester plusieurs heures sans le moindre problème... Est tu sûr de bien avoir démarré sur le noyau 3.8 ?

Pour la savoir tape dans un terminal :

uname -a

D'autre part as tu installé les pilotes proprios ATI ? si ce n'est pas le cas ça pourrait être la source du problème et vu que les pilotes par défaut d'ubuntu ne sont pas fait pour le 3.8 faut les installer manuellement depuis le site d'AMD. Allez vu que je suis sympa je vais t'éviter cette corvée tongue
Télécharges les différents paquets deb ici :lien supprimé voir post #25 pour l'installation via le site d'AMD (charges aussi le paquet dans acceleration materielle tu comprendras pourquoi juste après) puis dans un terminal tapes :

cd ./Téléchargements
sudo dpkg -i fglrx*.deb
sudo reboot

Et vois si ça va mieux après ça.


@The uploader : Raté on peux avoir l'accélération des vidéos qui fonctionne sous linux à condition de faire quelques paramétrages si tu veux que je t'explique ?

Bon allez voilà l'explication : Une fois les pilotes AMD installés, télécharger le paquet xvba-va-driver ici : http://archive.ubuntu.com/ubuntu/pool/m … _amd64.deb

/!\ Ne surtout pas le mettre à jour, les versions plus récentes sont bugées et ça ne fonctionne plus, si jamais ça arrive, désinstaller l'actuel et réinstaller celui-là.

Rajouter dans /etc/environment :

LIBVA_DRIVER_NAME=xvba
LIBVA_DRIVERS_PATH=/usr/lib/va/drivers

puis rebooter.

Ensuite pour voir si ça bien pris effet :

sudo apt-get install vainfo
vainfo

ce qui donne normalement ça  :

libva: VA-API version 0.32.0
libva: User requested driver 'xvba'
libva: Trying to open /usr/lib/va/drivers/xvba_drv_video.so
libva: va_openDriver() returns 0
vainfo: VA-API version: 0.32 (libva 1.0.15)
vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.7.8
vainfo: Supported profile and entrypoints
      VAProfileH264High               :    VAEntrypointVLD
      VAProfileVC1Advanced            :    VAEntrypointVLD

Pour être sûr que ça marche au meilleur de ses capacités installer la version daily de VLC (les version antérieurs à la 2.1 fonctionnent mal et bouffe plus de CPU ce qui empêche de lire des vidéos 1080p) :

sudo add-apt-repository ppa:videolan/master-daily
sudo apt-get update
sudo apt-get install vlc

Une fois VLC lancé faire : Outils (tools) → préférences → Lecture / codecs → sélectionner "Video Acceleration (VA) API" en haut à coté de "hardware-accelerated decoding" → enregistrer → redémarrer VLC → Enjoy smile

Dernière modification par renaud07 (Le 01/11/2013, à 22:55)


-AMD FX 8350 4,6 Ghz - Asus M5A97 R2.0 - nVidia GT610 - 8 Go RAM - 500 Go/1 To - dualboot Ubuntu  cinnamon 14.04 64 bits/windows 7 64 bits
-Dell vostro 3550 - Intel core i5 2410M 2.30Ghz  - HD Gaphics 3000 - 4Go RAM - 320Go - dualboot Xubuntu 14.04 64 bits/windows 7 64 bits
-Asus Eee PC 1225B - AMD C-60 1 Ghz - 4Go RAM - 500Go - dualboot Xubuntu 14.04 64 bits/windows 7 64 bits

Hors ligne

#22 Le 31/10/2013, à 13:51

The Uploader

Re : ASUS 1225B - Xubuntu 12.10 - plantages

renaud07 a écrit :

@The uploader : Raté on peux avoir l'accélération des vidéos qui fonctionne sous linux à condition de faire quelques paramétrages si tu veux que je t'explique ?

[HS]
Ben j'aurais bien pris un second 1225B pour moi, et le décodage par la CG est quelque chose de très utile je trouve (ça évite de chauffer le portable, surtout en HD, et ça permet d'avoir une plus longue autonomie sur batterie) donc ton explication est bienvenue. smile
Au vu de ses multiples problèmes sous GNU/Linux, j'avais laissé tomber l'idée d'acheter un second 1225B pour mon usage perso à l'époque (il y a ~1 an).
(bon par contre j'espère qu'on peut remplacer vlc par smplayer tongue )
[/HS]


Passer de Ubuntu 10.04 à Xubuntu 12.04 LTS
ASUS N56VV (UEFI + GPT, Core i5-3230M @ 2.60GHz, Intel HD4000 + GeForce 750M, 12 Go de RAM, SSD 1 To)
Système principal : Archlinux (amd64), avec KDE 4
Système oublié la plupart du temps : Windows 8.1 Update 1 (x64, OEM)

Hors ligne

#23 Le 31/10/2013, à 15:06

renaud07

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Je t'aurais également déconseillé d'acheter ce portable car même avec la bidouille certaines vidéo ne passent pas (à moins de rester sous W$ comme d'hab'), clairement le meilleur pour le moment c'est le  asus x201e 100% intel. J'avais pris le 1225B à l'époque à cause des atom N2600/2800 et leur CG moisie mais en fait ce n'est guère mieux... et le x201e n'était pas encore sorti sinon je l'aurais pris.

Dernière modification par renaud07 (Le 31/10/2013, à 15:11)


-AMD FX 8350 4,6 Ghz - Asus M5A97 R2.0 - nVidia GT610 - 8 Go RAM - 500 Go/1 To - dualboot Ubuntu  cinnamon 14.04 64 bits/windows 7 64 bits
-Dell vostro 3550 - Intel core i5 2410M 2.30Ghz  - HD Gaphics 3000 - 4Go RAM - 320Go - dualboot Xubuntu 14.04 64 bits/windows 7 64 bits
-Asus Eee PC 1225B - AMD C-60 1 Ghz - 4Go RAM - 500Go - dualboot Xubuntu 14.04 64 bits/windows 7 64 bits

Hors ligne

#24 Le 31/10/2013, à 21:15

Cisco32

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Salut,

uname -a:
Linux cisco-1225B 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

J ai egaIement mis les pilotes ATI comme dit plus haut.
D'ailleur ca me met un sens interdit en notification sur le tableau de bord  ....."nombre de paquets casses>0....."

Alors la je vois pas...?
Avez vous une autre solution?


ASUS 1225B AMD - XUBUNTU -

Hors ligne

#25 Le 01/11/2013, à 03:36

renaud07

Re : ASUS 1225B - Xubuntu 12.10 - plantages

Pour les paquets cassés fais un  :

sudo apt-get install -f

Est-ce que ça a bien installé les pilotes du coup ? Car si ça a mis l'erreur lorsque tu les a installé y'a un truc qui va pas...

Au cas ou je te donne la procédure pour les installer depuis le site d'AMD car c'est souvent que ma connexion bug et il se peut que un des paquets soit corrompu. Pense à supprimer ou déplacer les 3 paquets que tu as déjà téléchargé sinon ça risque de bugger (vu qu'il portent le même nom une fois compilé)

Télécharges : http://www2.ati.com/drivers/linux/amd-d … x86_64.zip puis dézippe-le (clic droit, puis extraire ici). Dans un terminal  :

cd ./Téléchargements
chmod +x amd-driver-installer-catalyst-13-4-linux-x86.x86_64.run
sudo sh ./amd-driver-installer-catalyst-13-4-x86.x86_64.run --buildpkg Ubuntu/precise

attendre qu'il ait fini de compiler les paquets... (c'est assez long)

sudo dpkg -i fglrx*.deb
sudo amdconfig --initial -f
sudo reboot

Dernière modification par renaud07 (Le 02/11/2013, à 16:15)


-AMD FX 8350 4,6 Ghz - Asus M5A97 R2.0 - nVidia GT610 - 8 Go RAM - 500 Go/1 To - dualboot Ubuntu  cinnamon 14.04 64 bits/windows 7 64 bits
-Dell vostro 3550 - Intel core i5 2410M 2.30Ghz  - HD Gaphics 3000 - 4Go RAM - 320Go - dualboot Xubuntu 14.04 64 bits/windows 7 64 bits
-Asus Eee PC 1225B - AMD C-60 1 Ghz - 4Go RAM - 500Go - dualboot Xubuntu 14.04 64 bits/windows 7 64 bits

Hors ligne

Haut de page ↑