Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails)

#1 Le 23/12/2013, à 22:09

fruity101079

[Résolu] MBR windows n'existe plus.

... enfin je crois.
A force de bidouille suite à différents problèmes, j'ai récupéré un système fonctionnel, si ce n'est que windows ne démarre plus.
J'en déduis que c'est un soucis de MBR vu que j'ai pas mal trifouillé boot-repair, et autre commande de réparation du grub, etc...

Alors j'ai vu que je pouvais tenter de réparer windows depuis le cd windows, puis de réinstaller le grub pour reprendre la main sur le démarrage, mais n'y a-t-il aucune autre manière de faire?

Ci-joint rapport bootrepair après réparation du grub:
http://paste.ubuntu.com/6625301/

Dernière modification par fruity101079 (Le 24/12/2013, à 17:16)


Ubuntu 14.04
Kubuntu 13.10

Hors ligne

#2 Le 24/12/2013, à 00:59

mikedafunk

Re : [Résolu] MBR windows n'existe plus.

Normalement il suffit de faire ça : http://doc.ubuntu-fr.org/grub-pc#recher … atiquement


Lubuntu 12.04 sur SSD 64go compaq mini / lubuntu 14.04 sur lenovo S10, tous deux avec 1go
Tu veux de l'aide physique ? Pense à la  liste des GUL ou aux parrains linux | http://mikedafunk.over-blog.org/

Hors ligne

#3 Le 24/12/2013, à 10:13

malbo

Re : [Résolu] MBR windows n'existe plus.

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 94 for .
 => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 94 for .
 => Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 94 for .
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdd.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ext2
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.04 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.10 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sdb4: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdc1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdd1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20130218
    Boot sector info:  Syslinux looks at sector 2067952 of /dev/sdd1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       According to the info in the boot sector, sdd1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdd1 starts at sector 62.
    Operating System:  
    Boot files:        /syslinux/syslinux.cfg /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 300.1 GB, 300069052416 bytes
255 heads, 63 sectors/track, 36481 cylinders, total 586072368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   586,072,063   586,070,016   7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1           7,807,590    72,822,644    65,015,055  83 Linux
/dev/sdb2          72,822,706   474,688,619   401,865,914   f W95 Extended (LBA)
/dev/sdb5          72,822,708   254,469,599   181,646,892  83 Linux
/dev/sdb6         254,469,663   474,688,619   220,218,957  83 Linux
/dev/sdb3    *    474,704,685   976,768,064   502,063,380   7 NTFS / exFAT / HPFS
/dev/sdb4                  63     7,807,589     7,807,527  82 Linux swap / Solaris


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *             63 1,953,520,064 1,953,520,002   7 NTFS / exFAT / HPFS


Drive: sdd _____________________________________________________________________

Disk /dev/sdd: 2031 MB, 2031091712 bytes
63 heads, 62 sectors/track, 1015 cylinders, total 3966976 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdd1    *             62     3,964,589     3,964,528   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        22D566DF14FDDE4E                       ntfs       Download
/dev/sdb1        faf298ae-7d84-481f-87db-df45341255b2   ext2       Sauvegarde
/dev/sdb3        5688BBDE88BBBAB7                       ntfs       Win7
/dev/sdb4        dcda273d-3c33-466f-ab8e-3e0166275ce8   swap       
/dev/sdb5        cd6b494c-6cd4-414a-acd5-6c3e827853fe   ext4       Kubuntu13.04
/dev/sdb6        7603d862-694b-45ce-852d-eb80ccfee07f   ext4       Kubuntu13.10
/dev/sdc1        56DF90432C30ABCC                       ntfs       1TO
/dev/sdd1        2B0D-6553                              vfat       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdd1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sdb5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=10
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux_proxy ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode

menuentry "Kubuntu 13.04 GNU/Linux" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
	else
	  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
	fi
	linux	/boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.8.0-34-generic
}
submenu "Options avancées pour Kubuntu 13.04 GNU/Linux"{
menuentry "Kubuntu GNU/Linux, avec Linux 3.8.0-34-generic" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-34-generic-advanced-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		echo	'Chargement de Linux 3.8.0-34-generic…'
		linux	/boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.8.0-34-generic
}
menuentry "Kubuntu GNU/Linux, avec Linux 3.8.0-34-generic (mode de dépannage)" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-34-generic-recovery-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
	recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		echo	'Chargement de Linux 3.8.0-34-generic…'
		linux	/boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.8.0-34-generic
}
menuentry "Kubuntu GNU/Linux, avec Linux 3.8.0-31-generic" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-31-generic-advanced-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		echo	'Chargement de Linux 3.8.0-31-generic…'
		linux	/boot/vmlinuz-3.8.0-31-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.8.0-31-generic
}
menuentry "Kubuntu GNU/Linux, avec Linux 3.8.0-31-generic (mode de dépannage)" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-31-generic-recovery-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
	recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		echo	'Chargement de Linux 3.8.0-31-generic…'
		linux	/boot/vmlinuz-3.8.0-31-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.8.0-31-generic
}
}
### END /etc/grub.d/10_linux_proxy ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
	else
	  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
	fi
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
	else
	  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober_proxy ###
menuentry "Windows 7 (loader) (sur /dev/sdb3)" --class windows --class os $menuentry_id_option 'osprober-chain-5688BBDE88BBBAB7' {
	insmod part_msdos
	insmod ntfs
	set root='hd1,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3  5688BBDE88BBBAB7
	else
	  search --no-floppy --fs-uuid --set=root 5688BBDE88BBBAB7
	fi
	chainloader +1
}

menuentry "Ubuntu 10.04 LTS (10.04)" --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-63b776c0-e53e-4adb-9688-28f0baf92fa2' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  63b776c0-e53e-4adb-9688-28f0baf92fa2
	else
	  search --no-floppy --fs-uuid --set=root 63b776c0-e53e-4adb-9688-28f0baf92fa2
	fi
	linux /boot/vmlinuz-2.6.32-54-generic root=UUID=63b776c0-e53e-4adb-9688-28f0baf92fa2 ro quiet splash
	initrd /boot/initrd.img-2.6.32-54-generic
}
submenu "Options avancées pour Ubuntu 10.04 LTS (10.04)"{
menuentry "Ubuntu, with Linux 2.6.32-54-generic (sur /dev/sdb6)" --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-2.6.32-54-generic--63b776c0-e53e-4adb-9688-28f0baf92fa2' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  63b776c0-e53e-4adb-9688-28f0baf92fa2
		else
		  search --no-floppy --fs-uuid --set=root 63b776c0-e53e-4adb-9688-28f0baf92fa2
		fi
		linux /boot/vmlinuz-2.6.32-54-generic root=UUID=63b776c0-e53e-4adb-9688-28f0baf92fa2 ro quiet splash
		initrd /boot/initrd.img-2.6.32-54-generic
}
menuentry "Ubuntu, with Linux 2.6.32-54-generic (recovery mode) (sur /dev/sdb6)" --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-2.6.32-54-generic-root=UUID=63b776c0-e53e-4adb-9688-28f0baf92fa2 ro single-63b776c0-e53e-4adb-9688-28f0baf92fa2' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  63b776c0-e53e-4adb-9688-28f0baf92fa2
		else
		  search --no-floppy --fs-uuid --set=root 63b776c0-e53e-4adb-9688-28f0baf92fa2
		fi
		linux /boot/vmlinuz-2.6.32-54-generic root=UUID=63b776c0-e53e-4adb-9688-28f0baf92fa2 ro single
		initrd /boot/initrd.img-2.6.32-54-generic
}
}
### END /etc/grub.d/30_os-prober_proxy ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb3 during installation
UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdb5 during installation
UUID=bd1b8fef-6fdf-46a6-b25e-b1b74223e5cf none            swap    sw              0       0

tmpfs           /tmp            tmpfs           mode=1777               0 0--------------------------------------------------------------------------------

=================== sdb5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


=========================== sdb6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  7603d862-694b-45ce-852d-eb80ccfee07f
else
  search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=10
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Kubuntu' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7603d862-694b-45ce-852d-eb80ccfee07f' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  7603d862-694b-45ce-852d-eb80ccfee07f
	else
	  search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
	fi
	linux	/boot/vmlinuz-3.11.0-14-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-14-generic
}
submenu 'Advanced options for Kubuntu' $menuentry_id_option 'gnulinux-advanced-7603d862-694b-45ce-852d-eb80ccfee07f' {
	menuentry 'Kubuntu, with Linux 3.11.0-14-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-14-generic-advanced-7603d862-694b-45ce-852d-eb80ccfee07f' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  7603d862-694b-45ce-852d-eb80ccfee07f
		else
		  search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
		fi
		echo	'Loading Linux 3.11.0-14-generic ...'
		linux	/boot/vmlinuz-3.11.0-14-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro   quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-14-generic
	}
	menuentry 'Kubuntu, with Linux 3.11.0-14-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-14-generic-recovery-7603d862-694b-45ce-852d-eb80ccfee07f' {
	recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  7603d862-694b-45ce-852d-eb80ccfee07f
		else
		  search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
		fi
		echo	'Loading Linux 3.11.0-14-generic ...'
		linux	/boot/vmlinuz-3.11.0-14-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-14-generic
	}
	menuentry 'Kubuntu, with Linux 3.11.0-12-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-7603d862-694b-45ce-852d-eb80ccfee07f' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  7603d862-694b-45ce-852d-eb80ccfee07f
		else
		  search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
		fi
		echo	'Loading Linux 3.11.0-12-generic ...'
		linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro   quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
	menuentry 'Kubuntu, with Linux 3.11.0-12-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-7603d862-694b-45ce-852d-eb80ccfee07f' {
	recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  7603d862-694b-45ce-852d-eb80ccfee07f
		else
		  search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
		fi
		echo	'Loading Linux 3.11.0-12-generic ...'
		linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  7603d862-694b-45ce-852d-eb80ccfee07f
	else
	  search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
	fi
	linux16	/boot/memtest86+.bin
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6  7603d862-694b-45ce-852d-eb80ccfee07f
	else
	  search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sdb3)' --class windows --class os $menuentry_id_option 'osprober-chain-5688BBDE88BBBAB7' {
	insmod part_msdos
	insmod ntfs
	set root='hd1,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3  5688BBDE88BBBAB7
	else
	  search --no-floppy --fs-uuid --set=root 5688BBDE88BBBAB7
	fi
	chainloader +1
}
menuentry 'Ubuntu 13.04 (13.04)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
	else
	  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
	fi
	linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.8.0-34-generic
}
submenu 'Advanced options for Ubuntu 13.04 (13.04)' $menuentry_id_option 'osprober-gnulinux-advanced-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
	menuentry 'Kubuntu 13.04 GNU/Linux (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-34-generic--cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.8.0-34-generic
	}
	menuentry 'Kubuntu GNU/Linux, avec Linux 3.8.0-34-generic (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-34-generic--cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.8.0-34-generic
	}
	menuentry 'Kubuntu GNU/Linux, avec Linux 3.8.0-34-generic (mode de dépannage) (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-34-generic-root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset
		initrd /boot/initrd.img-3.8.0-34-generic
	}
	menuentry 'Kubuntu GNU/Linux, avec Linux 3.8.0-31-generic (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-31-generic--cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		linux /boot/vmlinuz-3.8.0-31-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.8.0-31-generic
	}
	menuentry 'Kubuntu GNU/Linux, avec Linux 3.8.0-31-generic (mode de dépannage) (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-31-generic-root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  cd6b494c-6cd4-414a-acd5-6c3e827853fe
		else
		  search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
		fi
		linux /boot/vmlinuz-3.8.0-31-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset
		initrd /boot/initrd.img-3.8.0-31-generic
	}
}

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb6 during installation
UUID=7603d862-694b-45ce-852d-eb80ccfee07f /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdb4 during installation
UUID=dcda273d-3c33-466f-ab8e-3e0166275ce8 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sdb6: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


========================= sdd1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

================= sdd1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)


============== sdd1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sdb2

00000000  42 98 82 bf 23 47 68 78  e2 63 2f e1 90 c8 59 4c  |B...#Ghx.c/...YL|
00000010  67 6d 0e 96 b2 82 3c af  58 76 c2 89 98 b3 18 d7  |gm....<.Xv......|
00000020  b4 b8 02 83 84 b3 be 25  9b 53 16 fa df cb 98 a2  |.......%.S......|
00000030  3e 93 73 9e 70 9f bb c2  80 84 15 9e 24 8c d8 df  |>.s.p.......$...|
00000040  25 36 4b 4c 79 5e 41 39  bb 8e 28 69 8b 9c a9 16  |%6KLy^A9..(i....|
00000050  a7 0c ae dc 9b 1d 4b 51  ce 59 6c ce 22 49 2a 6d  |......KQ.Yl."I*m|
00000060  ed fa a1 d7 4a 47 f2 da  2f b2 87 98 8f ee 69 c7  |....JG../.....i.|
00000070  4d 2b 78 2c 16 57 00 95  e4 bd 11 60 49 5b ef 16  |M+x,.W.....`I[..|
00000080  34 14 12 31 7f 4c 64 85  f7 7c 6f 57 d8 e1 89 a0  |4..1.Ld..|oW....|
00000090  84 15 06 24 ed 3a 48 9a  50 24 95 cb 1d 76 73 0f  |...$.:H.P$...vs.|
000000a0  ef 54 e8 0a 23 b6 ad 7d  bd f2 b3 d0 a2 b7 90 10  |.T..#..}........|
000000b0  2e 74 a8 f3 84 95 b7 fe  35 4b e6 3d 59 cc f9 84  |.t......5K.=Y...|
000000c0  b0 27 8e fd 52 68 19 5d  68 e1 5b 90 0d 9b 23 2a  |.'..Rh.]h.[...#*|
000000d0  93 9a d4 e4 ee 3c 44 e2  12 97 38 bb 51 61 f1 5c  |.....<D...8.Qa.\|
000000e0  81 82 bf 27 ff b1 00 67  3f 85 e4 9f 11 6a fb 11  |...'...g?....j..|
000000f0  c3 bb 04 5b 36 57 30 58  68 01 be 57 01 fe c7 af  |...[6W0Xh..W....|
00000100  77 09 e2 bd d7 67 24 6f  3c f9 0f 09 8c 0a d7 05  |w....g$o<.......|
00000110  44 79 8e 38 f6 ce 96 7e  bf fd f7 0a 1d 39 73 4a  |Dy.8...~.....9sJ|
00000120  67 9b f7 ed 17 e5 57 a8  10 f6 ed 54 e8 d4 58 b8  |g.....W....T..X.|
00000130  bd 42 62 f2 cf 88 d6 ff  be 84 f1 5f 25 68 f7 23  |.Bb........_%h.#|
00000140  4c 0b 05 6d fb 11 a3 be  1f 67 f3 0a 04 22 7f 4e  |L..m.....g...".N|
00000150  04 ff 4e 60 56 d8 3f 7d  24 9f b7 98 1e d6 61 1d  |..N`V.?}$.....a.|
00000160  06 09 4b 58 c2 7f 50 10  b1 df 7e fe 99 a5 f6 5f  |..KX..P...~...._|
00000170  25 80 7f 11 c3 ff 69 09  e0 07 e6 f3 3b a1 bd da  |%.....i.....;...|
00000180  0b 32 19 ea 63 12 f4 1c  63 dc 06 ad d7 97 7a d6  |.2..c...c.....z.|
00000190  29 84 25 eb 2c a1 43 4d  10 7a 1f 7a 7f e0 31 fc  |).%.,.CM.z.z..1.|
000001a0  fc 9f 06 75 c1 37 f8 d1  f2 e3 7f 91 e9 81 a0 3e  |...u.7.........>|
000001b0  f8 d7 41 00 fa 81 49 7b  5a ba 24 0d 20 22 00 fe  |..A...I{Z.$. "..|
000001c0  ff ff 83 fe ff ff 02 00  00 00 2c b6 d3 0a 00 fe  |..........,.....|
000001d0  ff ff 05 fe ff ff 2e b6  d3 0a 8c 46 20 0d 00 00  |...........F ...|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
cat: write error: Broken pipe
cat: write error: Broken pipe
cat: /tmp/BootInfo-6GqZ2KEs/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-6GqZ2KEs/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-6GqZ2KEs/Tmp_Log: No such file or directory
File descriptor 7 (/proc/7425/mounts) leaked on lvscan invocation. Parent PID 27138: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-12-23__20h31 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 13.10, saucy, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity

=================== os-prober:
/dev/sdb3:Windows 7 (loader):Windows:chain
/dev/sdb5:Ubuntu 13.04 (13.04):Ubuntu:linux
/dev/sdb6:Ubuntu 13.10 (13.10):Ubuntu1:linux

=================== blkid:
/dev/sda1: LABEL="Download" UUID="22D566DF14FDDE4E" TYPE="ntfs"
/dev/sdb1: LABEL="Sauvegarde" UUID="faf298ae-7d84-481f-87db-df45341255b2" TYPE="ext2"
/dev/sdb3: LABEL="Win7" UUID="5688BBDE88BBBAB7" TYPE="ntfs"
/dev/sdb5: LABEL="Kubuntu13.04" UUID="cd6b494c-6cd4-414a-acd5-6c3e827853fe" TYPE="ext4"
/dev/sdb6: LABEL="Kubuntu13.10" UUID="7603d862-694b-45ce-852d-eb80ccfee07f" TYPE="ext4"
/dev/sdc1: LABEL="1TO" UUID="56DF90432C30ABCC" TYPE="ntfs"
/dev/loop0: TYPE="squashfs"
/dev/sdb4: UUID="dcda273d-3c33-466f-ab8e-3e0166275ce8" TYPE="swap"
/dev/sdd1: UUID="2B0D-6553" TYPE="vfat"


1 disks with OS, 3 OS : 2 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== sdb5/etc/grub.d/ :
drwxr-xr-x  5 1000 1000   4096 déc.  20 16:00 grub.d
total 68
-rwxr-xr-x 1 1000 1000  7541 avril  9  2013 00_header
-rwxr-xr-x 1 1000 1000  5974 avril  9  2013 05_debian_theme
-rwxr-xr-x 1 1000 1000   868 déc.  20 16:00 10_linux_proxy
-rwxr-xr-x 1 1000 1000 10258 avril  9  2013 20_linux_xen
-rwxr-xr-x 1 1000 1000  1688 déc.   5  2012 20_memtest86+
-rwxr-xr-x 1 1000 1000  1542 déc.  20 16:00 30_os-prober_proxy
-rwxr-xr-x 1 1000 1000  1426 avril  9  2013 30_uefi-firmware
-rwxr-xr-x 1 1000 1000   214 avril  9  2013 40_custom
-rwxr-xr-x 1 1000 1000   216 avril  9  2013 41_custom
drwxr-xr-x 4 1000 1000  4096 déc.  20 15:59 backup
drwxr-xr-x 2 1000 1000  4096 déc.  20 15:59 bin
drwxr-xr-x 2 1000 1000  4096 déc.  20 16:00 proxifiedScripts
-rw-r--r-- 1 1000 1000   483 avril  9  2013 README




=================== sdb5/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sdb6/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 déc.  21 19:22 grub.d
total 72
-rwxr-xr-x 1 root root  7850 oct.  10 17:53 00_header
-rwxr-xr-x 1 root root  5949 août  15 08:26 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct.  10 17:53 10_linux
-rwxr-xr-x 1 root root 10258 oct.  10 17:53 20_linux_xen
-rwxr-xr-x 1 root root  1798 juin  17  2013 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct.  10 17:53 30_os-prober
-rwxr-xr-x 1 root root  1426 oct.  10 17:53 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.  10 17:53 40_custom
-rwxr-xr-x 1 root root   216 oct.  10 17:53 41_custom
-rw-r--r-- 1 root root   483 oct.  10 17:53 README




=================== sdb6/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda1.
sdb1	: sdb,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb1.
sdb3	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdb3.
sdb5	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	customized,	farbios,	/mnt/boot-sav/sdb5.
sdb6	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdb6.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdc1.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	no-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	63 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	no-os,	63 sectors * 512 bytes


=================== parted -l:

Model: ATA SAMSUNG HD300LD (scsi)
Disk /dev/sda: 300GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size   Type     File system  Flags
1      1049kB  300GB  300GB  primary  ntfs         boot


Model: ATA WDC WD5000AADS-0 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
4      32.3kB  3997MB  3997MB  primary   linux-swap(v1)
1      3997MB  37.3GB  33.3GB  primary   ext2
2      37.3GB  243GB   206GB   extended                  lba
5      37.3GB  130GB   93.0GB  logical   ext4
6      130GB   243GB   113GB   logical   ext4
3      243GB   500GB   257GB   primary   ntfs            boot


Model: ATA WDC WD10EARS-00Y (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  1000GB  1000GB  primary  ntfs         boot


Model:  USB Flash Memory (scsi)
Disk /dev/sdd: 2031MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      31.7kB  2030MB  2030MB  primary  fat32        boot, lba

=================== parted -lm:

BYT;
/dev/sda:300GB:scsi:512:512:msdos:ATA SAMSUNG HD300LD;
1:1049kB:300GB:300GB:ntfs::boot;

BYT;
/dev/sdb:500GB:scsi:512:512:msdos:ATA WDC WD5000AADS-0;
4:32.3kB:3997MB:3997MB:linux-swap(v1)::;
1:3997MB:37.3GB:33.3GB:ext2::;
2:37.3GB:243GB:206GB:::lba;
5:37.3GB:130GB:93.0GB:ext4::;
6:130GB:243GB:113GB:ext4::;
3:243GB:500GB:257GB:ntfs::boot;

BYT;
/dev/sdc:1000GB:scsi:512:512:msdos:ATA WDC WD10EARS-00Y;
1:32.3kB:1000GB:1000GB:ntfs::boot;

BYT;
/dev/sdd:2031MB:scsi:512:512:msdos: USB Flash Memory;
1:31.7kB:2030MB:2030MB:fat32::boot, lba;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdd1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext2 (rw)
/dev/sdb3 on /mnt/boot-sav/sdb3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb5 on /mnt/boot-sav/sdb5 type ext4 (rw)
/dev/sdb6 on /mnt/boot-sav/sdb6 type ext4 (rw)
/dev/sdc1 on /mnt/boot-sav/sdc1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdd1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg log lp0 mapper mcelog mem net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdc sdc1 sdd sdd1 sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uinput urandom vga_arbiter vhost-net zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  f8 b7 ee 22 00 00 00 00  |..........."....|
00000030  04 00 00 00 00 00 00 00  ff fd 3e 00 00 00 00 00  |..........>.....|
00000040  f6 00 00 00 01 00 00 00  4e de fd 14 df 66 d5 22  |........N....f."|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 2d 6b 4b 1c  |........?...-kK.|
00000020  00 00 00 00 80 00 80 00  13 e1 ec 1d 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  b7 ba bb 88 de bb 88 56  |...............V|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sdc1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  81 59 70 74 00 00 00 00  |.........Ypt....|
00000030  04 00 00 00 00 00 00 00  98 05 47 07 00 00 00 00  |..........G.....|
00000040  f6 00 00 00 01 00 00 00  cc ab 30 2c 43 90 df 56  |..........0,C..V|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  2.0G  572M  1.5G  29% /
udev           devtmpfs   2.0G   12K  2.0G   1% /dev
tmpfs          tmpfs      404M  1.2M  403M   1% /run
/dev/sdd1      vfat       1.9G 1006M  927M  53% /cdrom
/dev/loop0     squashfs   958M  958M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      2.0G   52K  2.0G   1% /tmp
none           tmpfs      5.0M  4.0K  5.0M   1% /run/lock
none           tmpfs      2.0G   80K  2.0G   1% /run/shm
none           tmpfs      100M   20K  100M   1% /run/user
/dev/sda1      fuseblk    280G  149G  131G  54% /mnt/boot-sav/sda1
/dev/sdb1      ext2        31G  8.3G   21G  29% /mnt/boot-sav/sdb1
/dev/sdb3      fuseblk    240G  178G   63G  75% /mnt/boot-sav/sdb3
/dev/sdb5      ext4        86G   12G   70G  15% /mnt/boot-sav/sdb5
/dev/sdb6      ext4       104G  7.3G   91G   8% /mnt/boot-sav/sdb6
/dev/sdc1      fuseblk    932G  750G  183G  81% /mnt/boot-sav/sdc1

=================== fdisk -l:

Disk /dev/sda: 300.1 GB, 300069052416 bytes
255 heads, 63 sectors/track, 36481 cylinders, total 586072368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5ecbb65c

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   586072063   293035008    7  HPFS/NTFS/exFAT

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00077d9d

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1         7807590    72822644    32507527+  83  Linux
/dev/sdb2        72822706   474688619   200932957    f  W95 Ext'd (LBA)
/dev/sdb3   *   474704685   976768064   251031690    7  HPFS/NTFS/exFAT
/dev/sdb4              63     7807589     3903763+  82  Linux swap / Solaris
/dev/sdb5        72822708   254469599    90823446   83  Linux
/dev/sdb6       254469663   474688619   110109478+  83  Linux

Partition table entries are not in disk order

Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a4b79

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          63  1953520064   976760001    7  HPFS/NTFS/exFAT

Disk /dev/sdd: 2031 MB, 2031091712 bytes
63 heads, 62 sectors/track, 1015 cylinders, total 3966976 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000e6f3e

Device Boot      Start         End      Blocks   Id  System
/dev/sdd1   *          62     3964589     1982264    c  W95 FAT32 (LBA)


Warning: unknown mime-type for "/mnt/boot-sav/sdb6/etc/default/grub" -- using "application/octet-stream"
Error: no "view" mailcap rules found for type "application/octet-stream"
WARNING: You don't seem to have any mimeinfo.cache files.
Try running the update-desktop-database command. If you
don't have this command you should install the
desktop-file-utils package. This package is available from
http://freedesktop.org/wiki/Software_2fdesktop_2dfile_2dutils
Can't call method "get_value" on an undefined value at /usr/bin/mimeopen line 162.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(15049) KConfigGroup::readXdgListEntry: List entry Keywords in "k3bsetup.desktop" is not compliant with XDG standard (missing trailing semicolon).
"KConfigIni: In file /usr/share/kde4/services/muon-knsplasmoids-backend.desktop, line 110: " Invalid entry (missing '=')
"KConfigIni: In file /usr/share/kde4/services/muon-knsplasmoids-backend.desktop, line 111: " Invalid entry (empty key)
"KConfigIni: In file /usr/share/kde4/services/muon-knsplasmoids-backend.desktop, line 112: " Invalid entry (missing '=')
kbuildsycoca4(15049) KConfigGroup::readXdgListEntry: List entry Categories in "/usr/share/applications/im-config.desktop" is not compliant with XDG standard (missing trailing semicolon).
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QObject::connect: Cannot connect (null)::resourceScoreUpdated(QString, QString, QString, double) to NepomukPlugin::resourceScoreUpdated(QString, QString, QString, double)
QObject::connect: Cannot connect (null)::recentStatsDeleted(QString, int, QString) to NepomukPlugin::deleteRecentStats(QString, int, QString)
QObject::connect: Cannot connect (null)::earlierStatsDeleted(QString, int) to NepomukPlugin::deleteEarlierStats(QString, int)
kactivitymanagerd(15117)/nepomuk (library): Could not find virtuoso to connect to. Aborting
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: No such file or directory
QFileSystemWatcher: failed to add paths: /root/.config/ibus/bus
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: No such file or directory
QFileSystemWatcher: failed to add paths: /root/.kde/share/config/activitymanager-pluginsrc

=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sdb6 into the MBRs of all disks (except USB without OS).
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Custom-Repair
This setting will reinstall the grub2 of sdb6 into the MBRs of all disks (except USB without OS).
Additional repair will be performed: unhide-bootmenu-10s



Reinstall the GRUB of sdb6 into all MBRs of disks with OS or not-USB

*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 LE [Radeon HD 4830] [1002:944c]
Subsystem: CardExpert Technology Device [10b0:0401]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870] [1002:aa30]
*******

grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.

Reinstall the GRUB of sdb6 into the MBR of sda
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0

*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 LE [Radeon HD 4830] [1002:944c]
Subsystem: CardExpert Technology Device [10b0:0401]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870] [1002:aa30]
*******

grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.

Reinstall the GRUB of sdb6 into the MBR of sdc
Installation finished. No error reported.
grub-install /dev/sdc: exit code of grub-install /dev/sdc:0

*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 LE [Radeon HD 4830] [1002:944c]
Subsystem: CardExpert Technology Device [10b0:0401]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870] [1002:aa30]
*******

grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.

Reinstall the GRUB of sdb6 into the MBR of sdb
Installation finished. No error reported.
grub-install /dev/sdb: exit code of grub-install /dev/sdb:0

chroot /mnt/boot-sav/sdb6 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.11.0-14-generic
Found initrd image: /boot/initrd.img-3.11.0-14-generic
Found linux image: /boot/vmlinuz-3.11.0-12-generic
Found initrd image: /boot/initrd.img-3.11.0-12-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sdb3
Found Ubuntu 13.04 (13.04) on /dev/sdb5
Unhide GRUB boot menu in sdb6/boot/grub/grub.cfg

Boot successfully repaired.

You can now reboot your computer.
Please do not forget to make your BIOS boot on sdb (500GB) disk!

A première vue, on dirait que ça baigne y compris pour démarrer Windows mais il faut voir un peu plus loin.
Déjà, est-ce que tu peux confirmer que par défaut ton ordi démarre bien sur Ubuntu 13.10 ? D'autre part, tu dis que que windows ne démarre plus mais il faut être plus précis : qu'est-ce qui se passe sur l'écran quand tu sélectionnes "Windows 7 (loader) (on /dev/sdb3" dans le menu Grub ? Prends une photo si c'est trop compliqué à expliquer ou note l'erreur affichée si tu as un message qui indique l'erreur à l'écran.

Sinon, ce que tu as indiqué comme solution dans ton post #1 est correct :

Alors j'ai vu que je pouvais tenter de réparer windows depuis le cd windows, puis de réinstaller le grub pour reprendre la main sur le démarrage

Et pour ce qui est de réparer Windows 7, si tu n'as pas ce qu'il faut, je te recommande la solution épatante indiquée qui est "depuis un autre PC équipé de Win7". Je précise que ce dernier lien s'applique même si tu fais le disque de réparation depuis un autre ordi que le tien, pourvu qu'il soit équipé comme le tien de Win7.

Dernière modification par malbo (Le 24/12/2013, à 10:24)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

En ligne

#4 Le 24/12/2013, à 17:15

fruity101079

Re : [Résolu] MBR windows n'existe plus.

Finalement,  j'ai  démarré sur le cd Windows et réparer comme indiqué dans la doc. Et ça marche niquel. Même pas besoin de réinstaller grub !
Merci à tous.


Ubuntu 14.04
Kubuntu 13.10

Hors ligne

Haut de page ↑