#1 Le 08/01/2014, à 17:50
- souen
(résolu) problème de démarrage avec plusieurs linux
Bonjour,
j'ai installé un nouveau ubuntu (13.10) sur ma machine qui a déjà 2 autres systèmes
d'exploitation (ubuntu studio 12.4-windows seven) chacun des systèmes à son propre disque dur.
J'ai eu de grandes difficultés à installé ce dernier mais j'y suis parvenu.
Mon problème est lors du démarrage; le ubuntu 13.10 démarre toujours à partir du "dash"
et une fois les logins indiqué il démarre.
J'ai essayé de le réparer à l'aide de linux-secure-remix mais
le problème persiste.
Il m'indique à la fin
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (128GB)il me semble l'avoir fait. Pensez-vous que le problème vienne de là? Pourtant ça concerne le studio qui démarre lui très bien.
Voici le rapport que j'ai pu faire http://paste.ubuntu.com/6713470/
Si quelqu'un a une solution ou une indication?
Dernière modification par souen (Le 10/01/2014, à 13:27)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#2 Le 08/01/2014, à 21:11
- malbo
Re : (résolu) problème de démarrage avec plusieurs linux
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 12May2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 1 for /boot/grub.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 1 for /boot/grub.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdd and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 1 for /boot/grub.
=> Grub2 (v1.99) is installed in the MBR of /dev/sde and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 1 for /boot/grub.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdf.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub2 (v1.97-1.98) in the file /PhysicalDisk0_MBR.bin
looks at sector 1 of the same hard drive for core.img,
but core.img can not be found at this location.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdd1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdd2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdd5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sde1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sdf1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20120131
Boot sector info: Syslinux looks at sector 1631656 of /dev/sdf1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdf1 starts
at sector 0. But according to the info from fdisk,
sdf1 starts at sector 62.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 976,769,023 976,766,976 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 224,907,263 224,905,216 83 Linux
/dev/sdb2 224,909,310 250,068,991 25,159,682 5 Extended
/dev/sdb5 224,909,312 250,068,991 25,159,680 82 Linux swap / Solaris
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 1,637,937,151 1,637,935,104 7 NTFS / exFAT / HPFS
/dev/sdc2 * 1,637,939,200 1,953,521,663 315,582,464 7 NTFS / exFAT / HPFS
Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 * 2,048 209,281,023 209,278,976 83 Linux
/dev/sdd2 209,283,070 234,440,703 25,157,634 5 Extended
/dev/sdd5 209,283,072 234,440,703 25,157,632 82 Linux swap / Solaris
Drive: sde _____________________________________________________________________
Disk /dev/sde: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sde1 * 2,048 1,953,521,663 1,953,519,616 7 NTFS / exFAT / HPFS
Drive: sdf _____________________________________________________________________
Disk /dev/sdf: 8019 MB, 8019509248 bytes
247 heads, 62 sectors/track, 1022 cylinders, total 15663104 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdf1 * 62 15,650,907 15,650,846 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 cbbafd79-8835-43fe-a7d4-ad8da698afce ext3
/dev/sda1 FC78386178381D38 ntfs échange
/dev/sdb1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb ext4
/dev/sdb5 87abdd1e-fff6-4cac-8565-7d1d3f7a7ee3 swap
/dev/sdc1 925230E35230CDAB ntfs fichiers
/dev/sdc2 62CEA8C0CEA88E3B ntfs
/dev/sdd1 b06738e4-264a-420d-bd95-39033a69386c ext4
/dev/sdd5 78085428-d09d-4607-9a98-5ac39ac4830f swap
/dev/sde1 D2BC815FBC813ECB ntfs big
/dev/sdf1 C731-D0DF vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdf1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
set locale_dir=($root)/boot/grub/locale
set lang=fr_CH
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-58-lowlatency' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
linux /boot/vmlinuz-3.2.0-58-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-58-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-58-lowlatency (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
echo 'Loading Linux 3.2.0-58-lowlatency ...'
linux /boot/vmlinuz-3.2.0-58-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-58-lowlatency
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-57-lowlatency' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
linux /boot/vmlinuz-3.2.0-57-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-57-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-57-lowlatency (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
echo 'Loading Linux 3.2.0-57-lowlatency ...'
linux /boot/vmlinuz-3.2.0-57-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-57-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-56-lowlatency' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
linux /boot/vmlinuz-3.2.0-56-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-56-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-56-lowlatency (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
echo 'Loading Linux 3.2.0-56-lowlatency ...'
linux /boot/vmlinuz-3.2.0-56-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-56-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-55-lowlatency' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
linux /boot/vmlinuz-3.2.0-55-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-55-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-55-lowlatency (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
echo 'Loading Linux 3.2.0-55-lowlatency ...'
linux /boot/vmlinuz-3.2.0-55-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-55-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-52-lowlatency' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
linux /boot/vmlinuz-3.2.0-52-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-52-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-52-lowlatency (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
echo 'Loading Linux 3.2.0-52-lowlatency ...'
linux /boot/vmlinuz-3.2.0-52-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-52-lowlatency
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sdc2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd2,msdos2)'
search --no-floppy --fs-uuid --set=root 62CEA8C0CEA88E3B
chainloader +1
}
menuentry "Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b06738e4-264a-420d-bd95-39033a69386c (on /dev/sdd1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd3,msdos1)'
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.11.0-15-generic
}
menuentry "Ubuntu, avec Linux 3.11.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-15-generic-advanced-b06738e4-264a-420d-bd95-39033a69386c (on /dev/sdd1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd3,msdos1)'
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.11.0-15-generic
}
menuentry "Ubuntu, avec Linux 3.11.0-15-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-15-generic-recovery-b06738e4-264a-420d-bd95-39033a69386c (on /dev/sdd1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd3,msdos1)'
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro recovery nomodeset
initrd /boot/initrd.img-3.11.0-15-generic
}
menuentry "Ubuntu, avec Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-b06738e4-264a-420d-bd95-39033a69386c (on /dev/sdd1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd3,msdos1)'
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.11.0-12-generic
}
menuentry "Ubuntu, avec Linux 3.11.0-12-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-b06738e4-264a-420d-bd95-39033a69386c (on /dev/sdd1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd3,msdos1)'
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro recovery nomodeset
initrd /boot/initrd.img-3.11.0-12-generic
}
menuentry "Windows 7 (loader) (on /dev/sde1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd4,msdos1)'
search --no-floppy --fs-uuid --set=root D2BC815FBC813ECB
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
#Entry for /dev/sdb1 :
UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb / ext4 errors=remount-ro 0 1
#Entry for /dev/sda1 :
UUID=FC78386178381D38 /media/échange ntfs defaults,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177 0 0
#Entry for /dev/sdc1 :
UUID=925230E35230CDAB /media/fichiers ntfs defaults,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177 0 0
#Entry for /dev/sdd1 :
UUID=D2BC815FBC813ECB /media/big ntfs defaults,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177 0 0
#Entry for /dev/sdb5 :
UUID=87abdd1e-fff6-4cac-8565-7d1d3f7a7ee3 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
76.136512756 = 81.750958080 boot/grub/grub.cfg 1
76.260826111 = 81.884438528 boot/grub/core.img 1
76.134544373 = 81.748844544 boot/vmlinuz-3.2.0-52-lowlatency 1
13.575946808 = 14.577061888 boot/vmlinuz-3.2.0-55-lowlatency 1
16.501728058 = 17.718595584 boot/vmlinuz-3.2.0-56-lowlatency 1
24.138446808 = 25.918459904 boot/vmlinuz-3.2.0-57-lowlatency 1
30.810321808 = 33.082331136 boot/vmlinuz-3.2.0-58-lowlatency 1
30.810321808 = 33.082331136 vmlinuz 1
24.138446808 = 25.918459904 vmlinuz.old 1
13.637634277 = 14.643298304 boot/initrd.img-3.2.0-52-lowlatency 2
15.701725006 = 16.859598848 boot/initrd.img-3.2.0-55-lowlatency 1
31.975162506 = 34.333069312 boot/initrd.img-3.2.0-56-lowlatency 2
29.818912506 = 32.017813504 boot/initrd.img-3.2.0-57-lowlatency 1
31.672264099 = 34.007834624 boot/initrd.img-3.2.0-58-lowlatency 2
=========================== sdd1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 b06738e4-264a-420d-bd95-39033a69386c
else
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_CH
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b06738e4-264a-420d-bd95-39033a69386c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 b06738e4-264a-420d-bd95-39033a69386c
else
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
fi
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.11.0-15-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-b06738e4-264a-420d-bd95-39033a69386c' {
menuentry 'Ubuntu, avec Linux 3.11.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-15-generic-advanced-b06738e4-264a-420d-bd95-39033a69386c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 b06738e4-264a-420d-bd95-39033a69386c
else
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
fi
echo 'Chargement de Linux 3.11.0-15-generic…'
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-15-generic
}
menuentry 'Ubuntu, avec Linux 3.11.0-15-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-15-generic-recovery-b06738e4-264a-420d-bd95-39033a69386c' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 b06738e4-264a-420d-bd95-39033a69386c
else
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
fi
echo 'Chargement de Linux 3.11.0-15-generic…'
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-15-generic
}
menuentry 'Ubuntu, avec Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-b06738e4-264a-420d-bd95-39033a69386c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 b06738e4-264a-420d-bd95-39033a69386c
else
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
fi
echo 'Chargement de Linux 3.11.0-12-generic…'
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-12-generic
}
menuentry 'Ubuntu, avec Linux 3.11.0-12-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-b06738e4-264a-420d-bd95-39033a69386c' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 b06738e4-264a-420d-bd95-39033a69386c
else
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
fi
echo 'Chargement de Linux 3.11.0-12-generic…'
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=b06738e4-264a-420d-bd95-39033a69386c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-12-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 b06738e4-264a-420d-bd95-39033a69386c
else
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
fi
linux16 /boot/memtest86+.bin
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 b06738e4-264a-420d-bd95-39033a69386c
else
search --no-floppy --fs-uuid --set=root b06738e4-264a-420d-bd95-39033a69386c
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 12.04.3 LTS (12.04)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-58-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-58-lowlatency
}
submenu 'Options avancées pour Ubuntu 12.04.3 LTS (12.04)' $menuentry_id_option 'osprober-gnulinux-advanced-2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
menuentry 'Ubuntu, with Linux 3.2.0-58-lowlatency (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-58-lowlatency--2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-58-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-58-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-58-lowlatency (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-58-lowlatency-root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset-2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-58-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-58-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-57-lowlatency (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-57-lowlatency--2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-57-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-57-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-57-lowlatency (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-57-lowlatency-root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset-2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-57-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-57-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-56-lowlatency (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-56-lowlatency--2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-56-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-56-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-56-lowlatency (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-56-lowlatency-root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset-2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-56-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-56-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-55-lowlatency (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-55-lowlatency--2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-55-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-55-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-55-lowlatency (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-55-lowlatency-root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset-2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-55-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-55-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-52-lowlatency (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-52-lowlatency--2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-52-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-52-lowlatency
}
menuentry 'Ubuntu, with Linux 3.2.0-52-lowlatency (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-52-lowlatency-root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset-2dc7ada0-0fa8-4439-b549-bec7cd375fbb' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
else
search --no-floppy --fs-uuid --set=root 2dc7ada0-0fa8-4439-b549-bec7cd375fbb
fi
linux /boot/vmlinuz-3.2.0-52-lowlatency root=UUID=2dc7ada0-0fa8-4439-b549-bec7cd375fbb ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-52-lowlatency
}
}
menuentry 'Windows 7 (loader) (sur /dev/sdc2)' --class windows --class os $menuentry_id_option 'osprober-chain-62CEA8C0CEA88E3B' {
insmod part_msdos
insmod ntfs
set root='hd2,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos2 --hint-efi=hd2,msdos2 --hint-baremetal=ahci2,msdos2 62CEA8C0CEA88E3B
else
search --no-floppy --fs-uuid --set=root 62CEA8C0CEA88E3B
fi
chainloader +1
}
menuentry 'Windows 7 (loader) (sur /dev/sde1)' --class windows --class os $menuentry_id_option 'osprober-chain-D2BC815FBC813ECB' {
insmod part_msdos
insmod ntfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 D2BC815FBC813ECB
else
search --no-floppy --fs-uuid --set=root D2BC815FBC813ECB
fi
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdd1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdd1 during installation
UUID=b06738e4-264a-420d-bd95-39033a69386c / ext4 errors=remount-ro 0 1
# swap was on /dev/sdd5 during installation
UUID=78085428-d09d-4607-9a98-5ac39ac4830f none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdd1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
64.137649536 = 68.867276800 boot/grub/grub.cfg 1
32.137935638 = 34.507845632 boot/grub/i386-pc/core.img 1
0.721038818 = 0.774209536 boot/vmlinuz-3.11.0-12-generic 1
1.506221771 = 1.617293312 boot/vmlinuz-3.11.0-15-generic 1
1.506221771 = 1.617293312 vmlinuz 1
1.506221771 = 1.617293312 vmlinuz.old 1
0.993656158 = 1.066930176 boot/initrd.img-3.11.0-12-generic 1
2.407836914 = 2.585395200 boot/initrd.img-3.11.0-15-generic 1
2.407836914 = 2.585395200 initrd.img 1
=========================== sdf1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdf1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdf1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdf1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux/syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/vesamenu.c32 1
============== sdf1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdd2
00000000 84 c1 bc 68 1d 00 c4 0a 31 a7 0d 12 b3 17 c8 43 |...h....1......C|
00000010 18 de 95 31 04 89 9e 8b 6d 0c 3a 4a 98 68 c2 60 |...1....m.:J.h.`|
00000020 99 32 02 80 da ca d2 81 1c 85 39 6d 5a 4b ea fd |.2........9mZK..|
00000030 3a 8e 94 dd 24 a6 bb 60 5d 94 73 d8 e3 5f 18 25 |:...$..`].s.._.%|
00000040 e4 86 e4 2e 03 96 a4 5a c4 be 9a 31 6e 82 8a 62 |.......Z...1n..b|
00000050 fc 46 27 12 08 03 82 30 70 5c 38 8f 10 90 8c cf |.F'....0p\8.....|
00000060 50 51 1c aa 11 cb 51 c0 b9 08 c1 e8 0b 2f c8 83 |PQ....Q....../..|
00000070 13 05 e4 08 cf 2d 45 c5 50 15 11 f4 67 e2 51 65 |.....-E.P...g.Qe|
00000080 40 f8 7e f5 ee e1 f0 c0 e0 80 96 5d e3 a8 a3 41 |@.~........]...A|
00000090 4e 89 6a 63 fd 8e 87 fe b7 cc 4c 4a bc a8 d9 7c |N.jc......LJ...||
000000a0 07 a5 85 8e 1e 19 3b ac 47 ba ef 27 b1 ab a8 aa |......;.G..'....|
000000b0 d1 cb 3b 0a 5b ad 75 36 55 29 49 e7 4e c2 c1 6f |..;.[.u6U)I.N..o|
000000c0 2d 5b 40 00 73 6f 41 c0 99 89 af c1 8b 73 59 c4 |-[@.soA......sY.|
000000d0 8b c9 98 48 c9 b9 a8 f1 ac c4 19 a2 05 b1 82 6f |...H...........o|
000000e0 11 8a a2 29 86 80 31 93 a0 58 c4 f5 b6 6e df 26 |...)..1..X...n.&|
000000f0 d8 f1 e0 3e 33 2a 20 cd 9d 05 1c 32 0c 0d 11 23 |...>3* ....2...#|
00000100 80 40 40 20 2b b8 c8 88 31 91 8e 32 a3 c2 3c e1 |.@@ +...1..2..<.|
00000110 18 18 08 02 6e 62 8d 98 85 0a 90 c4 01 33 a7 90 |....nb.......3..|
00000120 4e c5 54 2a 5e ec 8f 32 69 e8 2a ad ad 29 e5 5d |N.T*^..2i.*..).]|
00000130 ec cd e1 71 78 ff fb e2 44 b5 0c c7 bc 68 cd 1b |...qx...D....h..|
00000140 9a 63 f1 03 2d 19 83 77 4f 5e 1f ad a3 30 6e 69 |.c..-..wO^...0ni|
00000150 8f c3 e8 34 66 4d cd 3d 70 aa 86 23 bb ab 60 9a |...4fM.=p..#..`.|
00000160 28 d5 6b b0 f9 30 5e 1d b1 4b 13 2a b1 74 ac 62 |(.k..0^..K.*.t.b|
00000170 8c c0 a9 52 c0 bc 86 1a 1c cc f9 38 b5 09 2c e6 |...R.......8..,.|
00000180 f5 85 59 2e 58 a2 a1 88 4b 8b f9 18 24 62 57 29 |..Y.X...K...$bW)|
00000190 55 8f e1 25 54 4a 67 eb 88 35 88 df 6e fd 54 91 |U..%TJg..5..n.T.|
000001a0 8e 8d d4 c9 f4 8b 73 23 d8 2e 2f d8 a2 2e 9b 6e |......s#../....n|
000001b0 c3 98 1b 53 d5 5f 2a 93 2e 30 d4 b4 56 ca 00 fe |...S._*..0..V...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 e0 7f 01 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdg
=============================== StdErr Messages: ===============================
File descriptor 8 (/proc/7740/mounts) leaked on lvscan invocation. Parent PID 28394: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-01-08__08h24 ===================
boot-repair version : 3.199~ppa2~raring
boot-sav version : 3.199~ppa2~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa2~raring
boot-repair is executed in live-session (Linux-Secure-Remix-64bit 20may2013, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
=================== os-prober:
/dev/sdb1:Ubuntu 12.04.3 LTS (12.04):Ubuntu:linux
/dev/sdc2:Windows 7 (loader):Windows:chain
/dev/sdd1:Ubuntu 13.10 (13.10):Ubuntu1:linux
/dev/sde1:Windows 7 (loader):Windows1:chain
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="cbbafd79-8835-43fe-a7d4-ad8da698afce" TYPE="ext3"
/dev/sda1: LABEL="M-CM-)change" UUID="FC78386178381D38" TYPE="ntfs"
/dev/sdb1: UUID="2dc7ada0-0fa8-4439-b549-bec7cd375fbb" TYPE="ext4"
/dev/sdb5: UUID="87abdd1e-fff6-4cac-8565-7d1d3f7a7ee3" TYPE="swap"
/dev/sdc1: LABEL="fichiers" UUID="925230E35230CDAB" TYPE="ntfs"
/dev/sdc2: UUID="62CEA8C0CEA88E3B" TYPE="ntfs"
/dev/sdd1: UUID="b06738e4-264a-420d-bd95-39033a69386c" TYPE="ext4"
/dev/sdd5: UUID="78085428-d09d-4607-9a98-5ac39ac4830f" TYPE="swap"
/dev/sde1: LABEL="big" UUID="D2BC815FBC813ECB" TYPE="ntfs"
/dev/sdf1: UUID="C731-D0DF" TYPE="vfat"
4 disks with OS, 4 OS : 2 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sdb1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdb1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 déc 24 09:51 grub.d
total 60
-rwxr-xr-x 1 root root 7806 déc 6 11:06 00_header
-rwxr-xr-x 1 root root 5522 jui 20 01:15 05_debian_theme
-rwxr-xr-x 1 root root 7877 déc 6 11:06 10_linux
-rwxr-xr-x 1 root root 6449 déc 6 11:06 20_linux_xen
-rwxr-xr-x 1 root root 1588 nov 27 2011 20_memtest86+
-rwxr-xr-x 1 root root 6675 déc 6 11:06 30_os-prober
-rwxr-xr-x 1 root root 1388 jui 20 01:29 30_uefi-firmware
-rwxr-xr-x 1 root root 214 jui 20 01:29 40_custom
-rwxr-xr-x 1 root root 95 jui 20 01:29 41_custom
-rw-r--r-- 1 root root 483 jui 20 01:29 README
=================== sdd1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdd1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 jan 7 22:58 grub.d
total 72
-rwxr-xr-x 1 root root 7850 oct 10 19:48 00_header
-rwxr-xr-x 1 root root 5949 aoû 15 10:26 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct 10 19:48 10_linux
-rwxr-xr-x 1 root root 10258 oct 10 19:48 20_linux_xen
-rwxr-xr-x 1 root root 1798 jun 17 2013 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct 10 19:48 30_os-prober
-rwxr-xr-x 1 root root 1426 oct 10 19:48 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct 10 19:48 40_custom
-rwxr-xr-x 1 root root 216 oct 10 19:48 41_custom
-rw-r--r-- 1 root root 483 oct 10 19:48 README
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sdb1 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb1.
sdc1 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdc1.
sdc2 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdc2.
sdd1 : sdd, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sdd1.
sde1 : sde, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sde1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdd : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sde : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HDP72505 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 500GB 500GB primary ntfs boot
Model: ATA SAMSUNG SSD 830 (scsi)
Disk /dev/sdb: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 115GB 115GB primary ext4 boot
2 115GB 128GB 12.9GB extended
5 115GB 128GB 12.9GB logical linux-swap(v1)
Model: ATA ST31000524AS (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 839GB 839GB primary ntfs
2 839GB 1000GB 162GB primary ntfs boot
Model: ATA OCZ-AGILITY3 (scsi)
Disk /dev/sdd: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 107GB 107GB primary ext4 boot
2 107GB 120GB 12.9GB extended
5 107GB 120GB 12.9GB logical linux-swap(v1)
Model: ATA SAMSUNG HD103SJ (scsi)
Disk /dev/sde: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 1000GB 1000GB primary ntfs boot
Model: USB 2.0 Flash Disk (scsi)
Disk /dev/sdf: 8020MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 31.7kB 8013MB 8013MB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:512:msdos:ATA Hitachi HDP72505;
1:1049kB:500GB:500GB:ntfs::boot;
BYT;
/dev/sdb:128GB:scsi:512:512:msdos:ATA SAMSUNG SSD 830;
1:1049kB:115GB:115GB:ext4::boot;
2:115GB:128GB:12.9GB:::;
5:115GB:128GB:12.9GB:linux-swap(v1)::;
BYT;
/dev/sdc:1000GB:scsi:512:512:msdos:ATA ST31000524AS;
1:1049kB:839GB:839GB:ntfs::;
2:839GB:1000GB:162GB:ntfs::boot;
BYT;
/dev/sdd:120GB:scsi:512:512:msdos:ATA OCZ-AGILITY3;
1:1049kB:107GB:107GB:ext4::boot;
2:107GB:120GB:12.9GB:::;
5:107GB:120GB:12.9GB:linux-swap(v1)::;
BYT;
/dev/sde:1000GB:scsi:512:512:msdos:ATA SAMSUNG HD103SJ;
1:1049kB:1000GB:1000GB:ntfs::boot;
BYT;
/dev/sdf:8020MB:scsi:512:512:msdos:USB 2.0 Flash Disk;
1:31.7kB:8013MB:8013MB:fat32::boot, lba;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdf1 on /cdrom type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw)
/dev/sdc1 on /mnt/boot-sav/sdc1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdc2 on /mnt/boot-sav/sdc2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdd1 on /mnt/boot-sav/sdd1 type ext4 (rw)
/dev/sde1 on /mnt/boot-sav/sde1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb5 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 sdc2 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdd1 sdd2 sdd5 size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sde1 size slaves stat subsystem trace uevent
/sys/block/sdf (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdf1 size slaves stat subsystem trace uevent
/sys/block/sdg (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb5 sdc sdc1 sdc2 sdd sdd1 sdd2 sdd5 sde sde1 sdf sdf1 sdg sg0 sg1 sg2 sg3 sg4 sg5 sg6 sg7 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net watchdog zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 47 38 3a 00 00 00 00 |.........G8:....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 38 1d 38 78 61 38 78 fc |........8.8xa8x.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdc1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff e7 a0 61 00 00 00 00 |...........a....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 ab cd 30 52 e3 30 52 92 |..........0R.0R.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdc2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 f8 a0 61 |........?......a|
00000020 00 00 00 00 80 00 80 00 ff 67 cf 12 00 00 00 00 |.........g......|
00000030 0b 00 00 00 00 00 00 00 8b 0e 01 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 3b 8e a8 ce c0 a8 ce 62 |........;......b|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sde1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 57 70 74 00 00 00 00 |.........Wpt....|
00000030 00 00 0c 00 00 00 00 00 7f 05 47 07 00 00 00 00 |..........G.....|
00000040 f6 00 00 00 01 00 00 00 cb 3e 81 bc 5f 81 bc d2 |.........>.._...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1008M 219M 738M 23% /
udev devtmpfs 5.9G 12K 5.9G 1% /dev
tmpfs tmpfs 1.2G 928K 1.2G 1% /run
/dev/sdf1 vfat 7.5G 1.8G 5.7G 24% /cdrom
/dev/loop0 squashfs 738M 738M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 5.9G 1.2M 5.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 5.9G 144K 5.9G 1% /run/shm
none tmpfs 100M 20K 100M 1% /run/user
/dev/sda1 fuseblk 466G 419G 48G 90% /mnt/boot-sav/sda1
/dev/sdb1 ext4 106G 31G 70G 31% /mnt/boot-sav/sdb1
/dev/sdc1 fuseblk 782G 522G 260G 67% /mnt/boot-sav/sdc1
/dev/sdc2 fuseblk 151G 128G 24G 85% /mnt/boot-sav/sdc2
/dev/sdd1 ext4 99G 4.4G 89G 5% /mnt/boot-sav/sdd1
/dev/sde1 fuseblk 932G 849G 83G 92% /mnt/boot-sav/sde1
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a9f19
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 976769023 488383488 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0009c9fe
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 224907263 112452608 83 Linux
/dev/sdb2 224909310 250068991 12579841 5 Extended
/dev/sdb5 224909312 250068991 12579840 82 Linux swap / Solaris
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x64f1e7a8
Device Boot Start End Blocks Id System
/dev/sdc1 2048 1637937151 818967552 7 HPFS/NTFS/exFAT
/dev/sdc2 * 1637939200 1953521663 157791232 7 HPFS/NTFS/exFAT
Disk /dev/sdd: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00029180
Device Boot Start End Blocks Id System
/dev/sdd1 * 2048 209281023 104639488 83 Linux
/dev/sdd2 209283070 234440703 12578817 5 Extended
/dev/sdd5 209283072 234440703 12578816 82 Linux swap / Solaris
Disk /dev/sde: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x288574f0
Device Boot Start End Blocks Id System
/dev/sde1 * 2048 1953521663 976759808 7 HPFS/NTFS/exFAT
Disk /dev/sdf: 8019 MB, 8019509248 bytes
247 heads, 62 sectors/track, 1022 cylinders, total 15663104 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006894d
Device Boot Start End Blocks Id System
/dev/sdf1 * 62 15650907 7825423 c W95 FAT32 (LBA)
User choice: Est-ce que sdb (128GB) est un disque amovible ? no
=================== Recommended repair
Recommended-Repair
This setting will reinstall the grub2 of sdb1 into the MBRs of all disks (except USB without OS).
Additional repair will be performed: unhide-bootmenu-10s
Reinstall the GRUB of sdb1 into all MBRs of disks with OS or not-USB
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sda
grub-install /dev/sda: Installation finished. No error reported.
exit code of grub-install /dev/sda:0
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sdc
grub-install /dev/sdc: Installation finished. No error reported.
exit code of grub-install /dev/sdc:0
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sdd
grub-install /dev/sdd: Installation finished. No error reported.
exit code of grub-install /dev/sdd:0
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sde
grub-install /dev/sde: Installation finished. No error reported.
exit code of grub-install /dev/sde:0
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sdb
grub-install /dev/sdb: Installation finished. No error reported.
exit code of grub-install /dev/sdb:0
chroot /mnt/boot-sav/sdb1 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.2.0-58-lowlatency
Found initrd image: /boot/initrd.img-3.2.0-58-lowlatency
Found linux image: /boot/vmlinuz-3.2.0-57-lowlatency
Found initrd image: /boot/initrd.img-3.2.0-57-lowlatency
Found linux image: /boot/vmlinuz-3.2.0-56-lowlatency
Found initrd image: /boot/initrd.img-3.2.0-56-lowlatency
Found linux image: /boot/vmlinuz-3.2.0-55-lowlatency
Found initrd image: /boot/initrd.img-3.2.0-55-lowlatency
Found linux image: /boot/vmlinuz-3.2.0-52-lowlatency
Found initrd image: /boot/initrd.img-3.2.0-52-lowlatency
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sdc2
Found Ubuntu 13.10 (13.10) on /dev/sdd1
Found Windows 7 (loader) on /dev/sde1
Unhide GRUB boot menu in sdb1/boot/grub/grub.cfg
Unhide GRUB boot menu in sdd1/boot/grub/grub.cfg
Le démarrage de l'ordinateur a été correctement réparé.
Vous pouvez maintenant redémarrer votre ordinateur.
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (128GB) !On y voit la "réparation recommandée" qui a été faite :
=================== Recommended repair
Recommended-Repair
This setting will reinstall the grub2 of sdb1 into the MBRs of all disks (except USB without OS).
Additional repair will be performed: unhide-bootmenu-10s
Reinstall the GRUB of sdb1 into all MBRs of disks with OS or not-USB
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sda
grub-install /dev/sda: Installation finished. No error reported.
exit code of grub-install /dev/sda:0
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sdc
grub-install /dev/sdc: Installation finished. No error reported.
exit code of grub-install /dev/sdc:0
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sdd
grub-install /dev/sdd: Installation finished. No error reported.
exit code of grub-install /dev/sdd:0
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sde
grub-install /dev/sde: Installation finished. No error reported.
exit code of grub-install /dev/sde:0
grub-install (GRUB) 1.99-21ubuntu3.14,grub-install (GRUB) 1.
Reinstall the GRUB of sdb1 into the MBR of sdb
grub-install /dev/sdb: Installation finished. No error reported.
exit code of grub-install /dev/sdb:0C'est à dire que dans chacun des MBR des disques durs, il y a un chargeur de Grub qui pointe sur Ubuntu de sdb1. Par conséquent, quelque soit le choix du disque dur de démarrage, c'est le Grub du Ubuntu installé dans sdb1 (Ubuntu 12.04.3 LTS) qui apparaît.
Selon moi, Boot-Repair fait une réparation de crétin si on le laisse faire sa "réparation recommandée" dans une config aussi compliquée que la tienne. Je t'engage à assainir la situation sans utiliser Boot-Repair. Le plus sûr est de réparer le démarrage disque par disque : laisser le disque sdc tout seul connecté, les autres étant déconnectés et réparer le démarrage de sdc (démarrage de Windows). Ensuite, déconnecter sdc et connecter sdd (seul connecté) et réparer le démarrage de sdd (Ubuntu 13.10). Le but est que chaque disque porteur d'un OS puisse démarrer de façon autonome.
Dernière modification par malbo (Le 08/01/2014, à 21:31)
Hors ligne
#3 Le 08/01/2014, à 21:18
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
Hello malbo, tout d'abord laisse-moi te souhaiter une bonne et heureuse
nouvelle année :-)
Pour ce qui est d'assainir la situation aurais-tu un moment à m'accorder?
Je ne saurais pas comment m'y prendre autrement.
Ma config est si compliquée que ça?....
Dernière modification par souen (Le 08/01/2014, à 21:21)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#4 Le 08/01/2014, à 21:29
- malbo
Re : (résolu) problème de démarrage avec plusieurs linux
Bonne année également.
J'ai complété mon message. Si c'est pas clair, demande.
Dernière modification par malbo (Le 08/01/2014, à 21:30)
Hors ligne
#5 Le 08/01/2014, à 21:58
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
Quand tu dis :
1.
laisser le disque sdc tout seul connecté, les autres étant déconnectés et réparer le démarrage de sdc
Le disque sdc, est-ce le disque où j'ai windows? Je le laisse seul connecté (mais je peux laisser les disque où j'ai mes fichiers?) et je n'ai pas compris comment réparer le démarrage, je fais ça comment?
2.
Ensuite, déconnecter sdc et connecter sdd (seul connecté) et réparer le démarrage de sdd (Ubuntu 13.10)
Une fois le point 1 accompli, je passe au point 2 en laissant branché uniquement mon unity et je répare (je ne sais pas comment faire) .
Désolé mais je ne pensais pas que ça allait être si compliqué. J'hésite du coup à enlever un des deux linux pour ne garder que 2 systèmes sur cette machine. Qu'en penses-tu?
Ou alors la solution que tu me proposes n'est pas si compliquée que ça?
Dernière modification par souen (Le 08/01/2014, à 21:59)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#6 Le 08/01/2014, à 22:04
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
Je pensais éventuellement enlever le disque 12.4 pour ne garder que le unity
et le windows. Ce qui me permettrait de faire une réparation automatique
avec boot-repair.
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#7 Le 09/01/2014, à 08:15
- malbo
Re : (résolu) problème de démarrage avec plusieurs linux
Le but c'est de réparer le démarrage sur chaque disque, c'est pour cette raison que je te suggère de déconnecter les autres disques pour ne laisser que le disque à réparer.
Dans ton post #5, tu demandes "Le disque sdc, est-ce le disque où j'ai windows?".
Réponse : oui comme tu peux voir dans cet extrait, ton disque C: de Windows 7 se trouve sur la deuxième partition de ton disque sdc (sdc2) :
sdc2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub2 (v1.97-1.98) in the file /PhysicalDisk0_MBR.bin
looks at sector 1 of the same hard drive for core.img,
but core.img can not be found at this location.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exeEt si je te dis de laisser un seul disque, je te dis de laisser un seul disque, pas deux. Pour ce qui est de réparer le démarrage, tu peux suivre la doc : http://doc.ubuntu-fr.org/comment_recupe … windows_78
Après cela, dans le MBR de sdc il y aura un chargeur d'amorçage de Windows 7 et pas un chargeur d'amorçage de Grub comme actuellement.
Quand ce sera fait, tu déconnectes ce disque sdc et tu connectes sdd qui doit être le seul disque connecté et tu fais la réparation avec l'aide d'un liveCD ou d'une liveUSB Ubuntu 13.10 avec l'aide de la doc : http://doc.ubuntu-fr.org/tutoriel/comme … aurer_grub
Cette doc propose d'utiliser Boot-repair et là tu peux l'utiliser parce qu'il n'y a qu'un seul disque dur connecté (c'est quand il y a plusieurs disques durs connectés ensemble que Boot-repair fout la merde mais s'il n'a qu'un seul disque à s'occuper, c'est correct). Mais sinon, Boot-repair n'est pas indispensable et les autres méthodes indiquées dans la doc fonctionnent parfaitement mais elles utilisent les lignes de commande ce qui peut rebuter.
Après cette dernière réparation, dans le MBR de sdd, il y aura le chargeur d'amorçage de ton Ubuntu 13.10 qui est installé dans sdd (alors qu'actuellement il y a le chargeur d'amorçage de Ubuntu 12.04.3 LTS qui se trouve sur sdb1. J'espère que tu peux comprendre que le grand principe, c'est que la chargeur d'amorçage d'un OS doit se trouver sur le même disque dur que l'OS. C'est ce que tu obtiendras à l'issue de ces opérations.
Si dans l'avenir, après avoir réussi à remettre de l'ordre dans ton installation et rebranché tous tous disques, tu te mets à paniquer un mauvais jour et que tu cliques sur "réparation recommandée" de Boot-Repair, tout ce que je tu auras pu faire sera détruit par Boot-repair qui va remettre le même chargeur d'amorçage dans tous les disques et tu seras revenu à l'état actuel. Il ne faudra plus utiliser Boot-repair après cela ou alors seulement sur un seul disque, les autres étant déconnectés, ou alors demander de l'aide sur le forum en postant ton Boot-Info pour faire une réparation ciblée sur le problème et non pas la réparation de bourrin de Boot-Repair.
Dernière modification par malbo (Le 09/01/2014, à 08:25)
Hors ligne
#8 Le 09/01/2014, à 08:56
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
La nuit porte conseil et finalement j'ai décidé d'enlever un des 2 linux
pour ne garder que la version 13.10 qui me plaît beaucoup. Ce sera beaucoup plus simple à gérer pour mon niveau.
Cette fois le grub semble correct mais au moment ou j'amorce sur ubuntu il me demande un login. Je ne fais
rien et il démarre normalement.
Voici le pastebin http://paste.ubuntu.com/6719197/
(Je ne vois ton message seulement maintenant.)
Dernière modification par souen (Le 09/01/2014, à 08:56)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#9 Le 09/01/2014, à 10:01
- malbo
Re : (résolu) problème de démarrage avec plusieurs linux
Fais les opérations que j'ai détaillées dans le post #7.
Hors ligne
#10 Le 09/01/2014, à 16:14
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
Voilà malbo, j'ai suivi tes recommandations et je crois que ça doit être bon.
Quand ce sera fait, tu déconnectes ce disque sdc et tu connectes sdd qui doit être le seul disque connecté et tu fais la réparation avec l'aide d'un liveCD ou d'une liveUSB Ubuntu 13.10 avec l'aide de la doc : http://doc.ubuntu-fr.org/tutoriel/comme … aurer_grub
je l'ai fait à l'aide de BootRepait parce que tu m'as précisé que s'il y avait qu'un disque ça jouait.
Après ça j'ai remis tous mes disques. J'ai redémarré il m'a amorcé sur ubuntu mais du coup il ne m'a pas proposé windows.
Donc j'ai relancé BootRepair et du coup j'ai à nouveau le choix des 2 os.
Voici ce que ça donne à présent http://paste.ubuntu.com/6720866
Je n'aurai pas imaginé que ça allait autant compliquer les choses de rajouter un troisième système.
Du coup j'aurais appris quelques nouveautés. Je te remercie malbo 
Par contre ce que je ne comprends pas c'est: pourquoi au démarrage ubuntu me demande après grub en shell mes logins? Est-ce un bug à l'installation? (il me l'a demandé y compris quand j'ai démarré avec uniquement ubuntu comme disque branché?
En tous cas ça semble correct maintenant à part ce login en shell qui me ralentit mon démarrage.
Je ne sais pas si tu comprends ce que je veux dire par "login en shell au démarrage"?
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#11 Le 09/01/2014, à 16:30
- malbo
Re : (résolu) problème de démarrage avec plusieurs linux
Voici un extrait de ton Boot-Info http://paste.ubuntu.com/6720866 :
=================== Recommended repair
Recommended-Repair
This setting will reinstall the grub2 of sdc1 into the MBRs of all disks (except USB without OS).
Additional repair will be performed: unhide-bootmenu-10s
Reinstall the GRUB of sdc1 into all MBRs of disks with OS or not-USB
grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.
Reinstall the GRUB of sdc1 into the MBR of sda
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.
Reinstall the GRUB of sdc1 into the MBR of sdb
Installation finished. No error reported.
grub-install /dev/sdb: exit code of grub-install /dev/sdb:0
grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.
Reinstall the GRUB of sdc1 into the MBR of sdd
Installation finished. No error reported.
grub-install /dev/sdd: exit code of grub-install /dev/sdd:0
grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.
Reinstall the GRUB of sdc1 into the MBR of sdc
Installation finished. No error reported.
grub-install /dev/sdc: exit code of grub-install /dev/sdc:0Je t'avais dit de ne pas lancer Boot-Repair quand il y avait plusieurs disques durs. Regarde ce qu'il a fait : il a installé le chargeur d'amorçage de Grub dans tous les disques durs. Là j'en ai marre de me fatiguer pour rien. j'ai fini avec toi.
Hors ligne
#12 Le 09/01/2014, à 16:35
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
oups...désolé 
mais je ne voyais pas comment faire autrement ...
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#13 Le 09/01/2014, à 20:44
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
Je ne comprends pas une chose: une fois que j'ai réparé windows et que je l'ai débranché
le disque et qu'ensuite je répare ubuntu avec boot-repair (là je peux il n'y a qu'un disque-
cette fois j'ai compris 
) après ça je ne comprends pas ce que je dois faire...
Je rebranche tous mes disques et je démarre? mais si je fais ça il démarre uniquement sur
ubuntu (c'est pour cela qu'avant j'ai fait l'erreur de le réparer en bourin avec boot-repair.
Si quelqu'un à une piste (je nage) ?
Dernière modification par souen (Le 09/01/2014, à 20:47)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#14 Le 09/01/2014, à 20:59
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
bon...je vais tout débrancher puis réparer windows rebrancher linux
réinstaller ubuntu en espérant qu'il saura me placer correctement le grub
à l’installation. (je suis désolé mais pour tout ça, je ne suis pas doué).
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#15 Le 10/01/2014, à 07:44
- malbo
Re : (résolu) problème de démarrage avec plusieurs linux
souen a écrit :
Je rebranche tous mes disques et je démarre? mais si je fais ça il démarre uniquement sur
ubuntu
Oui mais il suffit depuis cette session Ubuntu de passer la commande suivante dans un terminal :
sudo update-grubCette commande permet la détection des OS présents dans la machine et la mise à jour du menu Grub afin que ce menu comporte une entrée pour chaque OS détecté. Au démarrage suivant de l'ordi, tu auras bien une entrée pour Windows dans le menu Grub.
Dernière modification par malbo (Le 10/01/2014, à 07:46)
Hors ligne
#16 Le 10/01/2014, à 11:13
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
Merci malbo
voici mon dernier pastebin http://paste.ubuntu.com/6725576/
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#17 Le 10/01/2014, à 13:06
- malbo
Re : (résolu) problème de démarrage avec plusieurs linux
Ton dernier Boot-Info ( http://paste.ubuntu.com/6725576/ ) :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 12May2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 94 for .
=> Windows 7/8/2012 is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub2 (v1.97-1.98) in the file /PhysicalDisk0_MBR.bin
looks at sector 1 of the same hard drive for core.img,
but core.img can not be found at this location.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20120131
Boot sector info: Syslinux looks at sector 1631656 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdc1 starts
at sector 0. But according to the info from fdisk,
sdc1 starts at sector 62.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 209,281,023 209,278,976 83 Linux
/dev/sda2 209,283,070 234,440,703 25,157,634 5 Extended
/dev/sda5 209,283,072 234,440,703 25,157,632 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 1,637,937,151 1,637,935,104 7 NTFS / exFAT / HPFS
/dev/sdb2 * 1,637,939,200 1,953,521,663 315,582,464 7 NTFS / exFAT / HPFS
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 8019 MB, 8019509248 bytes
247 heads, 62 sectors/track, 1022 cylinders, total 15663104 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 62 15,650,907 15,650,846 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 cbbafd79-8835-43fe-a7d4-ad8da698afce ext3
/dev/sda1 95e0f55f-a8e0-4740-b842-4b81d98b39e2 ext4
/dev/sda5 78085428-d09d-4607-9a98-5ac39ac4830f swap
/dev/sdb1 925230E35230CDAB ntfs fichiers
/dev/sdb2 62CEA8C0CEA88E3B ntfs
/dev/sdc1 C731-D0DF vfat
/dev/sr0 udf Disque de r�paration Windows 7
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 95e0f55f-a8e0-4740-b842-4b81d98b39e2
else
search --no-floppy --fs-uuid --set=root 95e0f55f-a8e0-4740-b842-4b81d98b39e2
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_CH
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-95e0f55f-a8e0-4740-b842-4b81d98b39e2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 95e0f55f-a8e0-4740-b842-4b81d98b39e2
else
search --no-floppy --fs-uuid --set=root 95e0f55f-a8e0-4740-b842-4b81d98b39e2
fi
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=95e0f55f-a8e0-4740-b842-4b81d98b39e2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.11.0-15-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-95e0f55f-a8e0-4740-b842-4b81d98b39e2' {
menuentry 'Ubuntu, avec Linux 3.11.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-15-generic-advanced-95e0f55f-a8e0-4740-b842-4b81d98b39e2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 95e0f55f-a8e0-4740-b842-4b81d98b39e2
else
search --no-floppy --fs-uuid --set=root 95e0f55f-a8e0-4740-b842-4b81d98b39e2
fi
echo 'Chargement de Linux 3.11.0-15-generic…'
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=95e0f55f-a8e0-4740-b842-4b81d98b39e2 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-15-generic
}
menuentry 'Ubuntu, avec Linux 3.11.0-15-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-15-generic-recovery-95e0f55f-a8e0-4740-b842-4b81d98b39e2' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 95e0f55f-a8e0-4740-b842-4b81d98b39e2
else
search --no-floppy --fs-uuid --set=root 95e0f55f-a8e0-4740-b842-4b81d98b39e2
fi
echo 'Chargement de Linux 3.11.0-15-generic…'
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=95e0f55f-a8e0-4740-b842-4b81d98b39e2 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-15-generic
}
menuentry 'Ubuntu, avec Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-95e0f55f-a8e0-4740-b842-4b81d98b39e2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 95e0f55f-a8e0-4740-b842-4b81d98b39e2
else
search --no-floppy --fs-uuid --set=root 95e0f55f-a8e0-4740-b842-4b81d98b39e2
fi
echo 'Chargement de Linux 3.11.0-12-generic…'
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=95e0f55f-a8e0-4740-b842-4b81d98b39e2 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-12-generic
}
menuentry 'Ubuntu, avec Linux 3.11.0-12-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-95e0f55f-a8e0-4740-b842-4b81d98b39e2' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 95e0f55f-a8e0-4740-b842-4b81d98b39e2
else
search --no-floppy --fs-uuid --set=root 95e0f55f-a8e0-4740-b842-4b81d98b39e2
fi
echo 'Chargement de Linux 3.11.0-12-generic…'
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=95e0f55f-a8e0-4740-b842-4b81d98b39e2 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-12-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 95e0f55f-a8e0-4740-b842-4b81d98b39e2
else
search --no-floppy --fs-uuid --set=root 95e0f55f-a8e0-4740-b842-4b81d98b39e2
fi
linux16 /boot/memtest86+.bin
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 95e0f55f-a8e0-4740-b842-4b81d98b39e2
else
search --no-floppy --fs-uuid --set=root 95e0f55f-a8e0-4740-b842-4b81d98b39e2
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sdb2)' --class windows --class os $menuentry_id_option 'osprober-chain-62CEA8C0CEA88E3B' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 62CEA8C0CEA88E3B
else
search --no-floppy --fs-uuid --set=root 62CEA8C0CEA88E3B
fi
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=95e0f55f-a8e0-4740-b842-4b81d98b39e2 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=78085428-d09d-4607-9a98-5ac39ac4830f none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
60.153331757 = 64.589148160 boot/grub/grub.cfg 1
60.161170959 = 64.597565440 boot/grub/i386-pc/core.img 1
0.715820312 = 0.768606208 boot/vmlinuz-3.11.0-12-generic 2
2.174190521 = 2.334519296 boot/vmlinuz-3.11.0-15-generic 2
2.174190521 = 2.334519296 vmlinuz 2
2.174190521 = 2.334519296 vmlinuz.old 2
2.345230103 = 2.518171648 boot/initrd.img-3.11.0-12-generic 1
2.439098358 = 2.618961920 boot/initrd.img-3.11.0-15-generic 2
2.439098358 = 2.618961920 initrd.img 2
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux/syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 84 c1 bc 68 1d 00 c4 0a 31 a7 0d 12 b3 17 c8 43 |...h....1......C|
00000010 18 de 95 31 04 89 9e 8b 6d 0c 3a 4a 98 68 c2 60 |...1....m.:J.h.`|
00000020 99 32 02 80 da ca d2 81 1c 85 39 6d 5a 4b ea fd |.2........9mZK..|
00000030 3a 8e 94 dd 24 a6 bb 60 5d 94 73 d8 e3 5f 18 25 |:...$..`].s.._.%|
00000040 e4 86 e4 2e 03 96 a4 5a c4 be 9a 31 6e 82 8a 62 |.......Z...1n..b|
00000050 fc 46 27 12 08 03 82 30 70 5c 38 8f 10 90 8c cf |.F'....0p\8.....|
00000060 50 51 1c aa 11 cb 51 c0 b9 08 c1 e8 0b 2f c8 83 |PQ....Q....../..|
00000070 13 05 e4 08 cf 2d 45 c5 50 15 11 f4 67 e2 51 65 |.....-E.P...g.Qe|
00000080 40 f8 7e f5 ee e1 f0 c0 e0 80 96 5d e3 a8 a3 41 |@.~........]...A|
00000090 4e 89 6a 63 fd 8e 87 fe b7 cc 4c 4a bc a8 d9 7c |N.jc......LJ...||
000000a0 07 a5 85 8e 1e 19 3b ac 47 ba ef 27 b1 ab a8 aa |......;.G..'....|
000000b0 d1 cb 3b 0a 5b ad 75 36 55 29 49 e7 4e c2 c1 6f |..;.[.u6U)I.N..o|
000000c0 2d 5b 40 00 73 6f 41 c0 99 89 af c1 8b 73 59 c4 |-[@.soA......sY.|
000000d0 8b c9 98 48 c9 b9 a8 f1 ac c4 19 a2 05 b1 82 6f |...H...........o|
000000e0 11 8a a2 29 86 80 31 93 a0 58 c4 f5 b6 6e df 26 |...)..1..X...n.&|
000000f0 d8 f1 e0 3e 33 2a 20 cd 9d 05 1c 32 0c 0d 11 23 |...>3* ....2...#|
00000100 80 40 40 20 2b b8 c8 88 31 91 8e 32 a3 c2 3c e1 |.@@ +...1..2..<.|
00000110 18 18 08 02 6e 62 8d 98 85 0a 90 c4 01 33 a7 90 |....nb.......3..|
00000120 4e c5 54 2a 5e ec 8f 32 69 e8 2a ad ad 29 e5 5d |N.T*^..2i.*..).]|
00000130 ec cd e1 71 78 ff fb e2 44 b5 0c c7 bc 68 cd 1b |...qx...D....h..|
00000140 9a 63 f1 03 2d 19 83 77 4f 5e 1f ad a3 30 6e 69 |.c..-..wO^...0ni|
00000150 8f c3 e8 34 66 4d cd 3d 70 aa 86 23 bb ab 60 9a |...4fM.=p..#..`.|
00000160 28 d5 6b b0 f9 30 5e 1d b1 4b 13 2a b1 74 ac 62 |(.k..0^..K.*.t.b|
00000170 8c c0 a9 52 c0 bc 86 1a 1c cc f9 38 b5 09 2c e6 |...R.......8..,.|
00000180 f5 85 59 2e 58 a2 a1 88 4b 8b f9 18 24 62 57 29 |..Y.X...K...$bW)|
00000190 55 8f e1 25 54 4a 67 eb 88 35 88 df 6e fd 54 91 |U..%TJg..5..n.T.|
000001a0 8e 8d d4 c9 f4 8b 73 23 d8 2e 2f d8 a2 2e 9b 6e |......s#../....n|
000001b0 c3 98 1b 53 d5 5f 2a 93 2e 30 d4 b4 56 ca 00 fe |...S._*..0..V...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 e0 7f 01 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdd
=============================== StdErr Messages: ===============================
File descriptor 8 (/proc/7028/mounts) leaked on lvscan invocation. Parent PID 16061: bash
File descriptor 11 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvscan invocation. Parent PID 16061: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-01-10__10h08 ===================
boot-repair version : 3.199~ppa2~raring
boot-sav version : 3.199~ppa2~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa2~raring
boot-repair is executed in live-session (Linux-Secure-Remix-64bit 20may2013, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
=================== os-prober:
/dev/sda1:Ubuntu 13.10 (13.10):Ubuntu:linux
/dev/sdb2:Windows 7 (loader):Windows:chain
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="cbbafd79-8835-43fe-a7d4-ad8da698afce" TYPE="ext3"
/dev/sr0: LABEL="Disque de rM-iparation Windows 7^_" TYPE="udf"
/dev/sda1: UUID="95e0f55f-a8e0-4740-b842-4b81d98b39e2" TYPE="ext4"
/dev/sda5: UUID="78085428-d09d-4607-9a98-5ac39ac4830f" TYPE="swap"
/dev/sdb1: LABEL="fichiers" UUID="925230E35230CDAB" TYPE="ntfs"
/dev/sdb2: UUID="62CEA8C0CEA88E3B" TYPE="ntfs"
/dev/sdc1: UUID="C731-D0DF" TYPE="vfat"
2 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 jan 9 23:19 grub.d
total 72
-rwxr-xr-x 1 root root 7850 oct 10 19:48 00_header
-rwxr-xr-x 1 root root 5949 aoû 15 10:26 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct 10 19:48 10_linux
-rwxr-xr-x 1 root root 10258 oct 10 19:48 20_linux_xen
-rwxr-xr-x 1 root root 1798 jun 17 2013 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct 10 19:48 30_os-prober
-rwxr-xr-x 1 root root 1426 oct 10 19:48 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct 10 19:48 40_custom
-rwxr-xr-x 1 root root 216 oct 10 19:48 41_custom
-rw-r--r-- 1 root root 483 oct 10 19:48 README
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb2.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA OCZ-AGILITY3 (scsi)
Disk /dev/sda: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 107GB 107GB primary ext4 boot
2 107GB 120GB 12.9GB extended
5 107GB 120GB 12.9GB logical linux-swap(v1)
Model: ATA ST31000524AS (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 839GB 839GB primary ntfs
2 839GB 1000GB 162GB primary ntfs boot
Model: USB 2.0 Flash Disk (scsi)
Disk /dev/sdc: 8020MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 31.7kB 8013MB 8013MB primary fat32 boot, lba
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
has been opened read-only.
Error: /dev/sr0: unrecognised disk label
=================== parted -lm:
BYT;
/dev/sda:120GB:scsi:512:512:msdos:ATA OCZ-AGILITY3;
1:1049kB:107GB:107GB:ext4::boot;
2:107GB:120GB:12.9GB:::;
5:107GB:120GB:12.9GB:linux-swap(v1)::;
BYT;
/dev/sdb:1000GB:scsi:512:512:msdos:ATA ST31000524AS;
1:1049kB:839GB:839GB:ntfs::;
2:839GB:1000GB:162GB:ntfs::boot;
BYT;
/dev/sdc:8020MB:scsi:512:512:msdos:USB 2.0 Flash Disk;
1:31.7kB:8013MB:8013MB:fat32::boot, lba;
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
has been opened read-only.
Error: /dev/sr0: unrecognised disk label
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sdb2 sdc sdc1 sdd sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net watchdog zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff e7 a0 61 00 00 00 00 |...........a....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 ab cd 30 52 e3 30 52 92 |..........0R.0R.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdb2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 f8 a0 61 |........?......a|
00000020 00 00 00 00 80 00 80 00 ff 67 cf 12 00 00 00 00 |.........g......|
00000030 0b 00 00 00 00 00 00 00 8b 0e 01 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 3b 8e a8 ce c0 a8 ce 62 |........;......b|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1008M 244M 713M 26% /
udev devtmpfs 5.9G 12K 5.9G 1% /dev
tmpfs tmpfs 1.2G 896K 1.2G 1% /run
/dev/sdc1 vfat 7.5G 1.8G 5.7G 24% /cdrom
/dev/loop0 squashfs 738M 738M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 5.9G 1.2M 5.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 5.9G 144K 5.9G 1% /run/shm
none tmpfs 100M 20K 100M 1% /run/user
/dev/sda1 ext4 99G 4.4G 89G 5% /mnt/boot-sav/sda1
/dev/sdb1 fuseblk 782G 522G 260G 67% /mnt/boot-sav/sdb1
/dev/sdb2 fuseblk 151G 129G 22G 86% /mnt/boot-sav/sdb2
=================== fdisk -l:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002abbc
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 209281023 104639488 83 Linux
/dev/sda2 209283070 234440703 12578817 5 Extended
/dev/sda5 209283072 234440703 12578816 82 Linux swap / Solaris
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x64f1e7a8
Device Boot Start End Blocks Id System
/dev/sdb1 2048 1637937151 818967552 7 HPFS/NTFS/exFAT
/dev/sdb2 * 1637939200 1953521663 157791232 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 8019 MB, 8019509248 bytes
247 heads, 62 sectors/track, 1022 cylinders, total 15663104 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006894d
Device Boot Start End Blocks Id System
/dev/sdc1 * 62 15650907 7825423 c W95 FAT32 (LBA)
User choice: Est-ce que sda (120GB) est un disque amovible ? no
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (120GB) !
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.Là tout parait correct.
Dernière modification par malbo (Le 10/01/2014, à 13:08)
Hors ligne
#18 Le 10/01/2014, à 13:26
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
Super, Merci beaucoup malbo pour ton aide et désolé de t'avoir contrarié,
ça n'était vraiment pas le but. J'avais tellement l'habitude de faire les choses
d'une manière, sans me rendre compte que cette manière n'était pas correcte
qu'il m'a fallu un moment pour changer mes habitudes. A présent, je comprends mieux
comment ça fonctionne.
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#19 Le 12/01/2014, à 20:02
- souen
Re : (résolu) problème de démarrage avec plusieurs linux
Malbo si tu passes par là j'ai une question:
dans l'état actuel, si je débranche tous les disques et que je rebranche le disque du 2ème linux que j'avais décidé d'enlever
et que je je répare le boot à l'aide de boot-repair (pour ce seul disque) et qu'ensuite je rebranche tous les disques précédemment réparé et que je tape
(j'imagine que ce sera ce même disque qui démarrera)
sudo update-grubest-ce que du coup, j'aurai le choix entre les 3 systèmes au démarrage?
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#20 Le 12/01/2014, à 20:50
- malbo
Re : (résolu) problème de démarrage avec plusieurs linux
Fais-le et si ça ne marche pas comme tu souhaites, tu n'auras qu'à poster ton Boot-Info et on pourra voir ce qui se passe.
Hors ligne