Pages : 1
#1 Le 31/03/2014, à 20:57
- Bluesky65
Configurer hostapd avec une option WPS
Bonsoir tout le monde
Pour des raisons pratique, j'utilise hostapd en wpa2 relié a eth0 pour obtenir une connexion internet.Hostapd et dnsmasq marchent très bien, je me connecte sur mon réseau je peux surfer etc...
Mais j'aimerais simplifié la connexion en activant le wps avec hostapd et la méthode wps/PBC si possible, voici mon hostapd.conf des plus basic mais il marche:
# Define interface
interface=wlan0
# Select driver
driver=nl80211
# Set access point name
ssid=Fab2
# Set access point harware mode to 802.11g
hw_mode=g
# Set WIFI channel (can be easily changed)
channel=6
# Enable WPA2 only (1 for WPA, 2 for WPA2, 3 for WPA + WPA2)
wpa=2
wpa_passphrase=XXXXXXXX
Ma question est simple, que dois-je configurer et rajouter ensuite dans mon fichier conf pour que mon hotspot intègre le wps? car par exemple quand je tente hostapd_cli j'obtiens ceci:
hostapd_cli
hostapd_cli v1.0
Copyright (c) 2004-2012, Jouni Malinen <j@w1.fi> and contributors
This program is free software. You can distribute it and/or modify it
under the terms of the GNU General Public License version 2.
Alternatively, this software may be distributed under the terms of the
BSD license. See README and COPYING for more details.
Could not connect to hostapd - re-trying
Merci de m'aider car je galère depuis un moment avec ça déja...
Hors ligne
#2 Le 14/05/2014, à 00:21
- NOUNA
Re : Configurer hostapd avec une option WPS
bonjour
pouvez vous me donner le configuration complète de hostapd.conf
peut être il vous manque la config du bouton wps
Hors ligne