#1 Le 13/10/2007, à 05:29
- sammy
Configuration Beryl
Bonsoir à tous voilà mon problème, je souhaite mettre Beryl sur ma Ubuntu 7.04 Feisty Fawn fraîchement réinstaller. Carte ATI Mobility Radeon X700
Dans un premier temps je vérifie l'accélération 3D est activé avec les drivers ati installer nativement par Ubuntu. Super avant je l'avais pas 
. J'ai tout de meme installer les drivers ati que j'ai trouver sur leur site (fglrx) mais il ne supporte pas l'accéleration 3D. J'ai installer xgl qui me fais un truc tout moche ^^.
Xorg:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorgSection "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSectionSection "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSectionSection "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSectionSection "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSectionSection "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSectionSection "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "Device"
Identifier "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Driver "ati"
BusID "PCI:3:0:0"
EndSectionSection "Monitor"
Identifier "Écran générique"
Option "DPMS"
EndSectionSection "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSectionSection "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSectionSection "DRI"
Mode 0666
EndSection
Aprés avoir réinstaller la masse de mise à jour ^^:
apt-get install beryl beryl-manager beryl-ubuntu beryl-settings emerald-themes
l'installation se passe sans problème.
Mais au moment de tester: beryl --test-only voila ce qu'il me sort
**************************************************************
* Beryl system compatiblity check *
**************************************************************Detected xserver : AIGLX
Checking Display :0.0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passedChecking Screen 0 ...
Checking for GLX_SGIX_fbconfig : passed
Checking for GLX_EXT_texture_from_pixmap : passed
Checking for non power of two texture support : failedSupport for non power of two textures missing
Pourriez vous m'éclairer sur cette erreur ^^ merci.
Bien évidement lorsque je lance beryl-manager mais aucun des effet n'est visible et dans le menu lorsque je change pour cocher beryl il me remet immédiatement gnome.
Dernière modification par sammy (Le 13/10/2007, à 05:33)
Hors ligne
#2 Le 14/10/2007, à 18:34
- shoot76
Re : Configuration Beryl
oui en effet ! alors beryl est difficile a installer sur les 7.04 en raison des depot et du systeme lui mm ! maintenant tu peu, pour plus de simplicité te tourner vers compizfusion ( par smo ) sinon télécharge les paquets BERYL sur le site beryl ( en version 2.0 ) et tu les installes UNS PAR UNS ! c'est fastidieux car il y a parfois des pb de dependances ! mais bon après tu as un bon vieu beryl bien beau 
~ Data-sientist freelance : https://skulder.fr
Hors ligne
#3 Le 14/10/2007, à 22:27
- sammy
Re : Configuration Beryl
ok merci j'espère que se sera plus simple sur la 7.10
Hors ligne