#26 Le 29/05/2014, à 01:10
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Zut,
Alors que je croyais que tout était enfin réglé, j'ai encore perdu mon écran il y a de ça 5 minutes; après 3 jours sans aucun problème. C'est devenu un écran tout blanc, sans aucune possibilité de faire quoi que ce soit, excepté appuyer sur le bouton-panique (redémarrer) sur la tour.
Quelqu'un a une idée?
Hors ligne
#27 Le 29/05/2014, à 08:47
- sounderk
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Écran hs si c'est un vieux moniteur a tube catholique .....décheterie 
Ou bien et j'en ais réparé un dernièrement si c'et un moniteur lcd
La carte peut être endommager Les condensateur on chauffé et gonflé donc sont H.S
'' désoude avec de la tresse a dessouder remet les même condensateurs aux même emplacement (Uv respecte la valeur c'est marquer sur le coté ) et veille a respecter le coté négatif du condensateur ---la petite barre noir sur le coté--- au moment du resoudage .
Et roule ma poule
Dernière modification par sounderk (Le 29/05/2014, à 08:47)
Hors ligne
#28 Le 29/05/2014, à 16:47
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Il s'agit d'un écran plat tout récent.
Je n'ai pas le problème sous Windows, comme je l'ai mentionné à quelques occasions précédemment.
Les versions qui m'ont causé le plus de problèmes d'affichage sont Xubuntu, suivi de Ubuntu.
Lubuntu a fonctionné parfaitement jusqu'à ce j'envoie un message disant que tout était OK.
Et pour les histoires de soudure et de condensateurs, je ne suis ni technicien en informatique, électronique ou versé en électricité.
Tout ce que je demande, c'est de prolonger la vie utile de mon ordinateur qui, je le répète encore, fonctionne parfaitement sous Windows XP.
J'ai fait beaucoup de recherches et trouvé beaucoup de "post" concernant des problèmes similaires au mien et fait de mon mieux pour suivre les nombreux conseils.
J'ai déjà perdu beaucoup de temps et d'énergie à tenter de corriger des problèmes que je n'ai pas ailleurs que sous Linux.
S.V.P., aidez-moi avant que je n'enrichisse encore un peu plus Bill Gates.
Hors ligne
#29 Le 29/05/2014, à 21:33
- nam1962
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Si Xubuntu a plus de soucis que Ubuntu, c'est drôlement mystérieux ou matériel !
[ Modéré ]
Hors ligne
#30 Le 30/05/2014, à 01:19
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
En effet, plutôt mystérieux.
Sous Ubuntu, je perdais l'affichage de mon écran régulièrement mais à intervalles espacées de plus d'une heure.
Sous Xubuntu, le problème est même apparu sur le liveCD. Et en moins de 10 minutes après l'installation sous 14.04 et en moins d'une heure avec la version 12.04.
Avec Lubuntu 14.04, ça a pris 3 jours (utilisation moyenne de 6h/jour) avant que le problème survienne.
Dans tous les cas, je redémarre et tout fonctionne correctement comme s'il ne s'était jamais rien passé.
On m'a donné une astuce pour redémarrer uniquement la carte graphique, soit "CTRL+ALT+F7.
Est-ce que ça fonctionne vraiment?
Je vais l'essayer à la prochaine occasion, car elle va survenir.
Je conserve Lubuntu car il me satisfait (extrêmement rapide,démarrage en moins de 55 secondes et fermeture en 5 secondes; et aucune hésitation ou lenteur lors de l'utilisation) et je vais continuer mes recherches pour trouver une solution finale.
Comme je l'ai dis et redis, tout est nickel sous Windows. Le problème est entre Linux et mon ordinateur.
J'ai vérifié mon matériel avec les logiciels installés sous Windows. Ça m'indique que tout le matériel, les logiciels et les périphériques fonctionnent correctement.
La température moyenne de mon système est de 28°C; d'ailleurs mes 3 ventilateurs fonctionnement et je nettoie régulièrement l'intérieur pour éliminer la mousse et la poussière qui s'y accumule.
Si quelqu'un a des idées ou des suggestions, elles sont les bienvenues.
Et qu'en est-il de la carte graphique ATI Radeon Xpress 200? Est-elle supportée ou non par Ubuntu?
Mes recherches de pilotes propriétaires ne donnent rien, il ne semble n'y en avoir qu'un seul.
Hors ligne
#31 Le 30/05/2014, à 02:02
- spinoziste
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Bonsoir .
Que donne la commande :
xrandrCopiez-collez le résultat dans les balises code je vous prie . 
Pour jeter un œil du coté de la fréquence et de la résolution.
L' affichage disfonctionne t-il après le lancement d'une application particulière? Le câble qui relie l’écran au pc est-il de bonne facture pouvez vous essayer de tester un autre ?
Aussi avez-vous tenté d'installer les pilotes propriétaires de votre carte graphique ?
Pour jeter un œil au log de Xorg pouvez-vous donner le retour de :
cat /var/log/Xorg.0.logLa Lubuntu 14.04 est un bon choix .
Pour ma part je préconise une Lubuntu 14.04
Dernière modification par spinoziste (Le 30/05/2014, à 02:03)
Nous mourrons tous .
Hors ligne
#32 Le 30/05/2014, à 13:19
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Excusez mon ignorance: Que sont des "balises codes"?
Le délai de ma réponse peut sembler à l'occasion un peu long. C'est dû au décalage horaire entre nos 2 contrées; on n'est pas au même moment de la journée.
Mon affichage disparaît sans raison évidente. C'est souvent quand je suis sur internet, car c'est mon utilisation principale. Mais je ne pense pas que ce soit la cause car je l'ai parfois aussi perdu en explorant les divers programmes de Lubuntu/Xubuntu/Ubuntu.
Je l'ai d'ailleurs perdu il y a moins d'une minute lors de la rédaction de ce message.
Mon câble est de bonne qualité. C'est un ensemble dit "Édition Professionnelle" avec des composantes soi-disant de meilleure qualité.
Et je n'ai pas essayé à date d'autre écran ou câble car je n'ai le problème que sous Linux. À moins que le problème matériel (si c'en est un) ait apparu au moment ou je testais Ubuntu.
Pour un pilote graphique propriétaire, j'en ai téléchargé un sur le site AMD-ATI qui correspondait à ma carte. C'était un énorme fichier texte dont je ne savais quoi faire, dont je l'ai mis à la corbeille.
Je vous envoie le retour sur les commandes que vous me demandez sitôt que vous me dîtes ce que sont ces fameuses balises et comment les activer.
Hors ligne
#33 Le 30/05/2014, à 15:48
- spinoziste
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Ce sont les balises <> bleues quand vous éditez votre message .
Nous mourrons tous .
Hors ligne
#34 Le 30/05/2014, à 16:03
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Voici les informations que vous me demandez.
J'espère que vous pourrez m'aider à partir de celles-ci.
remi@remi-System-Product-Name:~$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
S-video disconnected (normal left inverted right x axis y axis)
remi@remi-System-Product-Name:~$ remi@remi-System-Product-Name:~$ cat /var/log/Xorg.0.log
[ 21.446]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 21.446] X Protocol Version 11, Revision 0
[ 21.446] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[ 21.446] Current Operating System: Linux remi-System-Product-Name 3.13.0-27-generic #50-Ubuntu SMP Thu May 15 18:08:16 UTC 2014 i686
[ 21.446] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=f103e4d7-66c3-41b0-95cf-b453c15919ef ro quiet splash vt.handoff=7
[ 21.446] Build Date: 16 April 2014 01:40:08PM
[ 21.446] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 21.446] Current version of pixman: 0.30.2
[ 21.446] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.446] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.446] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 30 09:55:58 2014
[ 21.446] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.447] (==) No Layout section. Using the first Screen section.
[ 21.447] (==) No screen section available. Using defaults.
[ 21.447] (**) |-->Screen "Default Screen Section" (0)
[ 21.447] (**) | |-->Monitor "<default monitor>"
[ 21.447] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 21.447] (==) Automatically adding devices
[ 21.447] (==) Automatically enabling devices
[ 21.447] (==) Automatically adding GPU devices
[ 21.447] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 21.447] Entry deleted from font path.
[ 21.447] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 21.447] Entry deleted from font path.
[ 21.447] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 21.447] Entry deleted from font path.
[ 21.468] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 21.468] Entry deleted from font path.
[ 21.468] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 21.468] Entry deleted from font path.
[ 21.468] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 21.468] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 21.468] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.468] (II) Loader magic: 0xb779f6c0
[ 21.468] (II) Module ABI versions:
[ 21.468] X.Org ANSI C Emulation: 0.4
[ 21.468] X.Org Video Driver: 15.0
[ 21.468] X.Org XInput driver : 20.0
[ 21.468] X.Org Server Extension : 8.0
[ 21.469] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 21.470] (--) PCI:*(0:1:5:0) 1002:5974:1043:8185 rev 0, Mem @ 0xc0000000/268435456, 0xfe400000/65536, I/O @ 0x0000c800/256, BIOS @ 0x????????/131072
[ 21.470] Initializing built-in extension Generic Event Extension
[ 21.470] Initializing built-in extension SHAPE
[ 21.470] Initializing built-in extension MIT-SHM
[ 21.470] Initializing built-in extension XInputExtension
[ 21.470] Initializing built-in extension XTEST
[ 21.470] Initializing built-in extension BIG-REQUESTS
[ 21.470] Initializing built-in extension SYNC
[ 21.470] Initializing built-in extension XKEYBOARD
[ 21.470] Initializing built-in extension XC-MISC
[ 21.470] Initializing built-in extension SECURITY
[ 21.470] Initializing built-in extension XINERAMA
[ 21.470] Initializing built-in extension XFIXES
[ 21.470] Initializing built-in extension RENDER
[ 21.470] Initializing built-in extension RANDR
[ 21.470] Initializing built-in extension COMPOSITE
[ 21.470] Initializing built-in extension DAMAGE
[ 21.470] Initializing built-in extension MIT-SCREEN-SAVER
[ 21.470] Initializing built-in extension DOUBLE-BUFFER
[ 21.470] Initializing built-in extension RECORD
[ 21.470] Initializing built-in extension DPMS
[ 21.470] Initializing built-in extension Present
[ 21.470] Initializing built-in extension DRI3
[ 21.470] Initializing built-in extension X-Resource
[ 21.470] Initializing built-in extension XVideo
[ 21.470] Initializing built-in extension XVideo-MotionCompensation
[ 21.470] Initializing built-in extension SELinux
[ 21.470] Initializing built-in extension XFree86-VidModeExtension
[ 21.470] Initializing built-in extension XFree86-DGA
[ 21.470] Initializing built-in extension XFree86-DRI
[ 21.470] Initializing built-in extension DRI2
[ 21.470] (II) LoadModule: "glx"
[ 21.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 21.560] (II) Module glx: vendor="X.Org Foundation"
[ 21.560] compiled for 1.15.1, module version = 1.0.0
[ 21.560] ABI class: X.Org Server Extension, version 8.0
[ 21.560] (==) AIGLX enabled
[ 21.560] Loading extension GLX
[ 21.561] (==) Matched fglrx as autoconfigured driver 0
[ 21.561] (==) Matched ati as autoconfigured driver 1
[ 21.561] (==) Matched fglrx as autoconfigured driver 2
[ 21.561] (==) Matched ati as autoconfigured driver 3
[ 21.561] (==) Matched modesetting as autoconfigured driver 4
[ 21.561] (==) Matched fbdev as autoconfigured driver 5
[ 21.561] (==) Matched vesa as autoconfigured driver 6
[ 21.561] (==) Assigned the driver to the xf86ConfigLayout
[ 21.561] (II) LoadModule: "fglrx"
[ 21.572] (WW) Warning, couldn't open module fglrx
[ 21.572] (II) UnloadModule: "fglrx"
[ 21.572] (II) Unloading fglrx
[ 21.572] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 21.572] (II) LoadModule: "ati"
[ 21.572] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 21.572] (II) Module ati: vendor="X.Org Foundation"
[ 21.572] compiled for 1.15.1, module version = 7.3.0
[ 21.573] Module class: X.Org Video Driver
[ 21.573] ABI class: X.Org Video Driver, version 15.0
[ 21.573] (II) LoadModule: "radeon"
[ 21.573] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 21.596] (II) Module radeon: vendor="X.Org Foundation"
[ 21.596] compiled for 1.15.1, module version = 7.3.0
[ 21.596] Module class: X.Org Video Driver
[ 21.596] ABI class: X.Org Video Driver, version 15.0
[ 21.596] (II) LoadModule: "modesetting"
[ 21.597] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 21.597] (II) Module modesetting: vendor="X.Org Foundation"
[ 21.597] compiled for 1.15.0, module version = 0.8.1
[ 21.597] Module class: X.Org Video Driver
[ 21.597] ABI class: X.Org Video Driver, version 15.0
[ 21.597] (II) LoadModule: "fbdev"
[ 21.597] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 21.597] (II) Module fbdev: vendor="X.Org Foundation"
[ 21.597] compiled for 1.15.0, module version = 0.4.4
[ 21.597] Module class: X.Org Video Driver
[ 21.597] ABI class: X.Org Video Driver, version 15.0
[ 21.597] (II) LoadModule: "vesa"
[ 21.597] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 21.597] (II) Module vesa: vendor="X.Org Foundation"
[ 21.597] compiled for 1.15.0, module version = 2.3.3
[ 21.597] Module class: X.Org Video Driver
[ 21.597] ABI class: X.Org Video Driver, version 15.0
[ 21.597] (==) Matched fglrx as autoconfigured driver 0
[ 21.597] (==) Matched ati as autoconfigured driver 1
[ 21.597] (==) Matched fglrx as autoconfigured driver 2
[ 21.597] (==) Matched ati as autoconfigured driver 3
[ 21.597] (==) Matched modesetting as autoconfigured driver 4
[ 21.597] (==) Matched fbdev as autoconfigured driver 5
[ 21.597] (==) Matched vesa as autoconfigured driver 6
[ 21.598] (==) Assigned the driver to the xf86ConfigLayout
[ 21.598] (II) LoadModule: "fglrx"
[ 21.598] (WW) Warning, couldn't open module fglrx
[ 21.598] (II) UnloadModule: "fglrx"
[ 21.598] (II) Unloading fglrx
[ 21.598] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 21.598] (II) LoadModule: "ati"
[ 21.598] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 21.598] (II) Module ati: vendor="X.Org Foundation"
[ 21.598] compiled for 1.15.1, module version = 7.3.0
[ 21.598] Module class: X.Org Video Driver
[ 21.598] ABI class: X.Org Video Driver, version 15.0
[ 21.598] (II) LoadModule: "modesetting"
[ 21.598] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 21.598] (II) Module modesetting: vendor="X.Org Foundation"
[ 21.598] compiled for 1.15.0, module version = 0.8.1
[ 21.599] Module class: X.Org Video Driver
[ 21.599] ABI class: X.Org Video Driver, version 15.0
[ 21.599] (II) UnloadModule: "modesetting"
[ 21.599] (II) Unloading modesetting
[ 21.599] (II) Failed to load module "modesetting" (already loaded, 0)
[ 21.599] (II) LoadModule: "fbdev"
[ 21.599] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 21.599] (II) Module fbdev: vendor="X.Org Foundation"
[ 21.599] compiled for 1.15.0, module version = 0.4.4
[ 21.599] Module class: X.Org Video Driver
[ 21.599] ABI class: X.Org Video Driver, version 15.0
[ 21.599] (II) UnloadModule: "fbdev"
[ 21.599] (II) Unloading fbdev
[ 21.599] (II) Failed to load module "fbdev" (already loaded, 0)
[ 21.599] (II) LoadModule: "vesa"
[ 21.599] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 21.599] (II) Module vesa: vendor="X.Org Foundation"
[ 21.599] compiled for 1.15.0, module version = 2.3.3
[ 21.599] Module class: X.Org Video Driver
[ 21.599] ABI class: X.Org Video Driver, version 15.0
[ 21.599] (II) UnloadModule: "vesa"
[ 21.599] (II) Unloading vesa
[ 21.599] (II) Failed to load module "vesa" (already loaded, 0)
[ 21.599] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 21.606] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 21.606] (II) FBDEV: driver for framebuffer: fbdev
[ 21.606] (II) VESA: driver for VESA chipsets: vesa
[ 21.606] (++) using VT number 7
[ 21.606] (II) [KMS] Kernel modesetting enabled.
[ 21.606] (WW) Falling back to old probe method for modesetting
[ 21.606] (WW) Falling back to old probe method for fbdev
[ 21.606] (II) Loading sub module "fbdevhw"
[ 21.606] (II) LoadModule: "fbdevhw"
[ 21.606] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 21.607] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 21.607] compiled for 1.15.1, module version = 0.0.2
[ 21.607] ABI class: X.Org Video Driver, version 15.0
[ 21.607] (WW) Falling back to old probe method for vesa
[ 21.607] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.607] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 21.607] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 21.607] (==) RADEON(0): Default visual is TrueColor
[ 21.607] (==) RADEON(0): RGB weight 888
[ 21.607] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 21.607] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200 5974 (PCIE)" (ChipID = 0x5974)
[ 21.607] (II) Loading sub module "dri2"
[ 21.607] (II) LoadModule: "dri2"
[ 21.607] (II) Module "dri2" already built-in
[ 21.607] (II) Loading sub module "exa"
[ 21.607] (II) LoadModule: "exa"
[ 21.607] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 21.607] (II) Module exa: vendor="X.Org Foundation"
[ 21.607] compiled for 1.15.1, module version = 2.6.0
[ 21.607] ABI class: X.Org Video Driver, version 15.0
[ 21.607] (II) RADEON(0): KMS Color Tiling: enabled
[ 21.607] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 21.607] (II) RADEON(0): KMS Pageflipping: enabled
[ 21.607] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 21.637] (II) RADEON(0): Output VGA-0 has no monitor section
[ 21.637] (II) RADEON(0): Output S-video has no monitor section
[ 21.666] (II) RADEON(0): EDID for output VGA-0
[ 21.666] (II) RADEON(0): Manufacturer: SAM Model: 215 Serial#: 1296380215
[ 21.666] (II) RADEON(0): Year: 2006 Week: 13
[ 21.666] (II) RADEON(0): EDID Version: 1.3
[ 21.666] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 21.666] (II) RADEON(0): Sync: Separate Composite SyncOnGreen
[ 21.666] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 21.666] (II) RADEON(0): Gamma: 2.20
[ 21.666] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 21.666] (II) RADEON(0): First detailed timing is preferred mode
[ 21.666] (II) RADEON(0): redX: 0.648 redY: 0.339 greenX: 0.292 greenY: 0.603
[ 21.666] (II) RADEON(0): blueX: 0.143 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 21.666] (II) RADEON(0): Supported established timings:
[ 21.666] (II) RADEON(0): 720x400@70Hz
[ 21.666] (II) RADEON(0): 640x480@60Hz
[ 21.666] (II) RADEON(0): 640x480@67Hz
[ 21.666] (II) RADEON(0): 640x480@72Hz
[ 21.666] (II) RADEON(0): 640x480@75Hz
[ 21.666] (II) RADEON(0): 800x600@56Hz
[ 21.666] (II) RADEON(0): 800x600@60Hz
[ 21.666] (II) RADEON(0): 800x600@72Hz
[ 21.666] (II) RADEON(0): 800x600@75Hz
[ 21.666] (II) RADEON(0): 832x624@75Hz
[ 21.666] (II) RADEON(0): 1024x768@60Hz
[ 21.666] (II) RADEON(0): 1024x768@70Hz
[ 21.666] (II) RADEON(0): 1024x768@75Hz
[ 21.666] (II) RADEON(0): 1280x1024@75Hz
[ 21.666] (II) RADEON(0): 1152x864@75Hz
[ 21.666] (II) RADEON(0): Manufacturer's mask: 0
[ 21.666] (II) RADEON(0): Supported standard timings:
[ 21.666] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 21.666] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 21.666] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 21.666] (II) RADEON(0): Supported detailed timing:
[ 21.666] (II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 21.666] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 21.666] (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 21.666] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 21.666] (II) RADEON(0): Monitor name: SyncMaster
[ 21.666] (II) RADEON(0): Serial No: H9NL302096
[ 21.666] (II) RADEON(0): EDID (in hex):
[ 21.666] (II) RADEON(0): 00ffffffffffff004c2d15023731454d
[ 21.666] (II) RADEON(0): 0d1001030e221b782a3d85a6564a9a24
[ 21.666] (II) RADEON(0): 125054bfef80818f714f814001010101
[ 21.666] (II) RADEON(0): 010101010101302a009851002a403070
[ 21.666] (II) RADEON(0): 1300520e1100001e000000fd00384b1e
[ 21.666] (II) RADEON(0): 510e000a202020202020000000fc0053
[ 21.666] (II) RADEON(0): 796e634d61737465720a2020000000ff
[ 21.666] (II) RADEON(0): 0048394e4c3330323039360a2020008c
[ 21.667] (II) RADEON(0): Printing probed modes for output VGA-0
[ 21.667] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 21.667] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 21.667] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 21.667] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 21.667] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 21.667] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 21.667] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 21.667] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 21.667] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 21.667] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 21.667] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 21.667] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 21.667] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 21.667] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 21.667] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 21.667] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 21.667] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 21.667] (II) RADEON(0): EDID for output S-video
[ 21.667] (II) RADEON(0): Output VGA-0 connected
[ 21.667] (II) RADEON(0): Output S-video disconnected
[ 21.667] (II) RADEON(0): Using exact sizes for initial modes
[ 21.667] (II) RADEON(0): Output VGA-0 using initial mode 1280x1024
[ 21.667] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.667] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7ac0000
[ 21.667] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 21.667] (==) RADEON(0): DPI set to (96, 96)
[ 21.667] (II) Loading sub module "fb"
[ 21.667] (II) LoadModule: "fb"
[ 21.667] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.667] (II) Module fb: vendor="X.Org Foundation"
[ 21.667] compiled for 1.15.1, module version = 1.0.0
[ 21.667] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.667] (II) Loading sub module "ramdac"
[ 21.667] (II) LoadModule: "ramdac"
[ 21.667] (II) Module "ramdac" already built-in
[ 21.667] (II) UnloadModule: "modesetting"
[ 21.668] (II) Unloading modesetting
[ 21.668] (II) UnloadModule: "fbdev"
[ 21.668] (II) Unloading fbdev
[ 21.668] (II) UnloadSubModule: "fbdevhw"
[ 21.668] (II) Unloading fbdevhw
[ 21.668] (II) UnloadModule: "vesa"
[ 21.668] (II) Unloading vesa
[ 21.668] (--) Depth 24 pixmap format is 32 bpp
[ 21.668] (II) RADEON(0): [DRI2] Setup complete
[ 21.668] (II) RADEON(0): [DRI2] DRI driver: r300
[ 21.668] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 21.668] (II) RADEON(0): Front buffer size: 5120K
[ 21.668] (II) RADEON(0): VRAM usage limit set to 108489K
[ 21.668] (==) RADEON(0): Backing store enabled
[ 21.668] (II) RADEON(0): Direct rendering enabled
[ 21.668] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 21.668] (II) EXA(0): Driver allocated offscreen pixmaps
[ 21.668] (II) EXA(0): Driver registered support for the following operations:
[ 21.668] (II) Solid
[ 21.668] (II) Copy
[ 21.668] (II) Composite (RENDER acceleration)
[ 21.668] (II) UploadToScreen
[ 21.668] (II) DownloadFromScreen
[ 21.668] (II) RADEON(0): Acceleration enabled
[ 21.668] (==) RADEON(0): DPMS enabled
[ 21.668] (==) RADEON(0): Silken mouse enabled
[ 21.668] (II) RADEON(0): Set up textured video
[ 21.668] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 21.668] (II) RADEON(0): [XvMC] Extension initialized.
[ 21.668] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.720] (--) RandR disabled
[ 21.729] (II) SELinux: Disabled on system
[ 21.784] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.784] (II) AIGLX: enabled GLX_ARB_create_context
[ 21.784] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 21.784] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 21.784] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.784] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 21.784] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 21.784] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 21.784] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.785] (II) AIGLX: Loaded and initialized r300
[ 21.785] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.786] (II) RADEON(0): Setting screen physical size to 338 x 270
[ 21.805] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 21.809] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 21.809] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.809] (II) LoadModule: "evdev"
[ 21.810] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.824] (II) Module evdev: vendor="X.Org Foundation"
[ 21.824] compiled for 1.15.0, module version = 2.8.2
[ 21.824] Module class: X.Org XInput Driver
[ 21.824] ABI class: X.Org XInput driver, version 20.0
[ 21.824] (II) Using input driver 'evdev' for 'Power Button'
[ 21.824] (**) Power Button: always reports core events
[ 21.824] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 21.824] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.824] (--) evdev: Power Button: Found keys
[ 21.824] (II) evdev: Power Button: Configuring as keyboard
[ 21.824] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 21.824] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.824] (**) Option "xkb_rules" "evdev"
[ 21.824] (**) Option "xkb_model" "pc105"
[ 21.824] (**) Option "xkb_layout" "ca"
[ 21.827] (II) XKB: reuse xkmfile /var/lib/xkb/server-3BCFF748FFB6BCDACC88715CBF6A9DF905CD3181.xkm
[ 21.828] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.828] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.828] (II) Using input driver 'evdev' for 'Power Button'
[ 21.828] (**) Power Button: always reports core events
[ 21.828] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 21.828] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.828] (--) evdev: Power Button: Found keys
[ 21.828] (II) evdev: Power Button: Configuring as keyboard
[ 21.828] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 21.828] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.828] (**) Option "xkb_rules" "evdev"
[ 21.828] (**) Option "xkb_model" "pc105"
[ 21.828] (**) Option "xkb_layout" "ca"
[ 21.829] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 21.829] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 21.829] (II) config/udev: Adding input device HDA ULI M5461 Line Out CLFE (/dev/input/event6)
[ 21.829] (II) No input driver specified, ignoring this device.
[ 21.829] (II) This device may have been added with another device file.
[ 21.829] (II) config/udev: Adding input device HDA ULI M5461 Line Out Side (/dev/input/event5)
[ 21.829] (II) No input driver specified, ignoring this device.
[ 21.829] (II) This device may have been added with another device file.
[ 21.830] (II) config/udev: Adding input device HDA ULI M5461 Front Headphone (/dev/input/event4)
[ 21.830] (II) No input driver specified, ignoring this device.
[ 21.830] (II) This device may have been added with another device file.
[ 21.830] (II) config/udev: Adding input device HDA ULI M5461 Rear Mic (/dev/input/event11)
[ 21.830] (II) No input driver specified, ignoring this device.
[ 21.830] (II) This device may have been added with another device file.
[ 21.830] (II) config/udev: Adding input device HDA ULI M5461 Front Mic (/dev/input/event10)
[ 21.830] (II) No input driver specified, ignoring this device.
[ 21.830] (II) This device may have been added with another device file.
[ 21.830] (II) config/udev: Adding input device HDA ULI M5461 Line (/dev/input/event9)
[ 21.830] (II) No input driver specified, ignoring this device.
[ 21.830] (II) This device may have been added with another device file.
[ 21.831] (II) config/udev: Adding input device HDA ULI M5461 Line Out Front (/dev/input/event8)
[ 21.831] (II) No input driver specified, ignoring this device.
[ 21.831] (II) This device may have been added with another device file.
[ 21.831] (II) config/udev: Adding input device HDA ULI M5461 Line Out Surround (/dev/input/event7)
[ 21.831] (II) No input driver specified, ignoring this device.
[ 21.831] (II) This device may have been added with another device file.
[ 21.832] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 21.832] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.832] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.832] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.832] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 21.832] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.832] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.832] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.832] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 21.832] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 21.832] (**) Option "xkb_rules" "evdev"
[ 21.832] (**) Option "xkb_model" "pc105"
[ 21.832] (**) Option "xkb_layout" "ca"
[ 21.832] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event3)
[ 21.832] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 21.832] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[ 21.832] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 21.832] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event3"
[ 21.832] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[ 21.832] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 21.832] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 21.832] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 21.832] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 21.833] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 21.833] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 21.833] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 21.833] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.833] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event3"
[ 21.833] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
[ 21.833] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 21.833] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 21.833] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 21.833] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 21.833] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 21.833] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 21.833] (II) No input driver specified, ignoring this device.
[ 21.833] (II) This device may have been added with another device file.
[ 24.383] (II) XKB: reuse xkmfile /var/lib/xkb/server-3BCFF748FFB6BCDACC88715CBF6A9DF905CD3181.xkm
[ 172.296] (II) RADEON(0): EDID vendor "SAM", prod id 533
[ 172.297] (II) RADEON(0): Using EDID range info for horizontal sync
[ 172.297] (II) RADEON(0): Using EDID range info for vertical refresh
[ 172.297] (II) RADEON(0): Printing DDC gathered Modelines:
[ 172.297] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 172.297] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 172.297] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 172.297] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 172.297] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 172.297] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 172.297] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 172.297] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 172.297] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 172.297] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 172.297] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 172.297] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 172.297] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 172.297] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 172.297] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 172.297] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 172.297] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
remi@remi-System-Product-Name:~$ Hors ligne
#35 Le 30/05/2014, à 16:05
- spinoziste
Re : (ABANDONNÉ) Perd tout le contenu du bureau
OK . Que donne
xrandr -s 1280x1024 -r 75?
Nous mourrons tous .
Hors ligne
#36 Le 30/05/2014, à 17:39
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Ça ne donne strictement rien. Aucun résultat.
En passant, les commandes que j'avais trouvé sur un autre site pour soi-disant redémarrer l'écran et/ou la carte graphique: soit CTRL+ALT+F6 ou F7 ne fonctionnent pas.
Hors ligne
#37 Le 30/05/2014, à 18:24
- spinoziste
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Logiquement Ctrl + Alt + F1 permet de basculer sur le tty1 (ecran noir avec terminal) et Ctrl + Alt + F7 de revenir sur la session X lancée (le bureau) . C'est etrange que cela ne fonctionne pas .
Que donne :
xrandraprès que vous ayez entré la commande :
xrandr -s 1280x1024 -r 75?
Visiblement il y a une erreur avec fglrx
[ 21.572] (EE) Failed to load module "fglrx" (module does not exist, 0)Que donnent les commandes
modinfo fglrx et
cat /etc/X11/xorg.confet
dmesg?
Dernière modification par spinoziste (Le 30/05/2014, à 18:27)
Nous mourrons tous .
Hors ligne
#38 Le 30/05/2014, à 20:50
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Finalement, la commande se terminant par r 75 avait changé la fréquence d'écran de 60 (recommandé) à 75.
Voici les réponses aux questions de votre dernier message:
remi@remi-System-Product-Name:~$ xrandr -s 1280x1024 -r 75
remi@remi-System-Product-Name:~$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0 + 75.0*
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
S-video disconnected (normal left inverted right x axis y axis)
remi@remi-System-Product-Name:~$ modinfo fglrx
modinfo: ERROR: Module fglrx not found.
remi@remi-System-Product-Name:~$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type
remi@remi-System-Product-Name:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-27-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #50-Ubuntu SMP Thu May 15 18:08:16 UTC 2014 (Ubuntu 3.13.0-27.50-generic 3.13.11)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037fbe000-0x0000000037fdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037fe0000-0x0000000037ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8R-MX, BIOS 0403 04/06/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 base 0020000000 mask FFF0000000 write-back
[ 0.000000] 2 base 0030000000 mask FFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b8c000, 0x01b8cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35c58000-0x36e23fff]
[ 0.000000] ACPI: RSDP 000fb470 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 37fb0000 000034 (v01 A M I OEMRSDT 04000606 MSFT 00000097)
[ 0.000000] ACPI: FACP 37fb0200 000084 (v02 A M I OEMFACP 04000606 MSFT 00000097)
[ 0.000000] ACPI: DSDT 37fb0430 0050D8 (v01 A0389 A0389001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 37fbe000 000040
[ 0.000000] ACPI: APIC 37fb0390 00005C (v01 A M I OEMAPIC 04000606 MSFT 00000097)
[ 0.000000] ACPI: MCFG 37fb03f0 00003C (v01 A M I OEMMCFG 04000606 MSFT 00000097)
[ 0.000000] ACPI: OEMB 37fbe040 000046 (v01 A M I AMI_OEM 04000606 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b8d000, 0x01b8dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x37faffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x37faffff]
[ 0.000000] On node 0 totalpages: 229198
[ 0.000000] free_area_init_node: node 0, pgdat c1995100, node_mem_map f74fe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8 pages used for memmap
[ 0.000000] HighMem zone: 946 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x38000000-0xff7bffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f74dc000 s36096 r0 d21248 u57344
[ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227414
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=f103e4d7-66c3-41b0-95cf-b453c15919ef ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1834360 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00037fb0)
[ 0.000000] Memory: 876764K/916792K available (6520K kernel code, 643K rwdata, 2756K rodata, 872K init, 924K bss, 40028K reserved, 3784K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19b2000 - 0xc1a8c000 ( 872 kB)
[ 0.000000] .data : 0xc165e632 - 0xc19b1d40 (3405 kB)
[ 0.000000] .text : 0xc1000000 - 0xc165e632 (6521 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches PMTIMER. 2 loops
[ 0.000000] tsc: Detected 2200.086 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.17 BogoMIPS (lpj=8800344)
[ 0.012009] pid_max: default: 32768 minimum: 301
[ 0.012058] Security Framework initialized
[ 0.012082] AppArmor: AppArmor initialized
[ 0.012084] Yama: becoming mindful.
[ 0.012150] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.012153] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.012427] Initializing cgroup subsys memory
[ 0.012437] Initializing cgroup subsys devices
[ 0.012440] Initializing cgroup subsys freezer
[ 0.012443] Initializing cgroup subsys blkio
[ 0.012445] Initializing cgroup subsys perf_event
[ 0.012449] Initializing cgroup subsys hugetlb
[ 0.012481] mce: CPU supports 5 MCE banks
[ 0.012498] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.012498] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.012498] tlb_flushall_shift: 4
[ 0.027712] ACPI: Core revision 20131115
[ 0.030771] ACPI: All ACPI Tables successfully acquired
[ 0.031172] ftrace: allocating 27744 entries in 55 pages
[ 0.040117] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044721] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084492] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3500+ (fam: 0f, model: 2f, stepping: 02)
[ 0.088000] Performance Events: AMD PMU driver.
[ 0.088000] ... version: 0
[ 0.088000] ... bit width: 48
[ 0.088000] ... generic registers: 4
[ 0.088000] ... value mask: 0000ffffffffffff
[ 0.088000] ... max period: 00007fffffffffff
[ 0.088000] ... fixed-purpose events: 0
[ 0.088000] ... event mask: 000000000000000f
[ 0.088000] x86: Booted up 1 node, 1 CPUs
[ 0.088000] smpboot: Total of 1 processors activated (4400.17 BogoMIPS)
[ 0.088167] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088235] devtmpfs: initialized
[ 0.088443] EVM: security.selinux
[ 0.088444] EVM: security.SMACK64
[ 0.088446] EVM: security.ima
[ 0.088447] EVM: security.capability
[ 0.088525] PM: Registering ACPI NVS region [mem 0x37fbe000-0x37fdffff] (139264 bytes)
[ 0.089918] pinctrl core: initialized pinctrl subsystem
[ 0.090001] regulator-dummy: no parameters
[ 0.090036] RTC time: 18:44:29, date: 05/30/14
[ 0.090090] NET: Registered protocol family 16
[ 0.090250] EISA bus registered
[ 0.090252] cpuidle: using governor ladder
[ 0.090254] cpuidle: using governor menu
[ 0.090259] node 0 link 0: io port [1000, ffffff]
[ 0.090263] TOM: 0000000040000000 aka 1024M
[ 0.090266] node 0 link 0: mmio [bff00000, dfeeffff]
[ 0.090269] node 0 link 0: mmio [40000000, bfefffff]
[ 0.090272] node 0 link 0: mmio [e0000000, efffffff]
[ 0.090274] node 0 link 0: mmio [dfef0000, dfffffff]
[ 0.090276] node 0 link 0: mmio [a0000, bffff]
[ 0.090279] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.090282] bus: [bus 00-ff] on node 0 link 0
[ 0.090284] bus: 00 [io 0x0000-0xffff]
[ 0.090285] bus: 00 [mem 0x40000000-0xdfffffff]
[ 0.090287] bus: 00 [mem 0xe0000000-0xfcffffffff]
[ 0.090289] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.090351] ACPI: bus type PCI registered
[ 0.090353] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.090430] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.090434] PCI: not using MMCONFIG
[ 0.090970] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.091056] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.091058] PCI: Using configuration type 1 for base access
[ 0.092596] bio: create slab <bio-0> at 0
[ 0.092764] ACPI: Added _OSI(Module Device)
[ 0.092766] ACPI: Added _OSI(Processor Device)
[ 0.092768] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092769] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.094262] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.096052] ACPI: Interpreter enabled
[ 0.096064] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.096069] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.096084] ACPI: (supports S0 S3 S4 S5)
[ 0.096086] ACPI: Using IOAPIC for interrupt routing
[ 0.096349] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.097377] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.097379] PCI: Using MMCONFIG for extended config space
[ 0.097394] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.097501] ACPI: No dock devices found.
[ 0.103728] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.103735] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.103741] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.103849] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.103852] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.103855] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.103857] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.103860] acpi PNP0A03:00: host bridge window [mem 0x38000000-0xfff7ffff] (ignored)
[ 0.103863] PCI: root bus 00: hardware-probed resources
[ 0.104056] PCI host bridge to bus 0000:00
[ 0.104060] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.104062] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.104065] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff]
[ 0.104068] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfcffffffff]
[ 0.104070] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.104080] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
[ 0.104174] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
[ 0.104291] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.104361] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.104428] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.104498] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.104573] pci 0000:00:19.0: [10b9:5249] type 01 class 0x060400
[ 0.104665] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.104705] pci 0000:00:1b.0: [10b9:5263] type 00 class 0x020000
[ 0.104723] pci 0000:00:1b.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.104733] pci 0000:00:1b.0: reg 0x14: [mem 0xfebffc00-0xfebffcff]
[ 0.104797] pci 0000:00:1b.0: PME# supported from D3hot D3cold
[ 0.104842] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.104878] pci 0000:00:1c.0: [10b9:5237] type 00 class 0x0c0310
[ 0.104892] pci 0000:00:1c.0: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.104985] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.105017] pci 0000:00:1c.1: [10b9:5237] type 00 class 0x0c0310
[ 0.105031] pci 0000:00:1c.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.105123] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.105159] pci 0000:00:1c.2: [10b9:5237] type 00 class 0x0c0310
[ 0.105172] pci 0000:00:1c.2: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.105265] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.105307] pci 0000:00:1c.3: [10b9:5239] type 00 class 0x0c0320
[ 0.105326] pci 0000:00:1c.3: reg 0x10: [mem 0xfebff800-0xfebff8ff]
[ 0.105407] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.105454] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.105496] pci 0000:00:1d.0: [10b9:5461] type 00 class 0x040300
[ 0.105517] pci 0000:00:1d.0: reg 0x10: [mem 0xfebf8000-0xfebfbfff 64bit]
[ 0.105581] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.105626] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.105663] pci 0000:00:1e.0: [10b9:1573] type 00 class 0x060100
[ 0.105816] pci 0000:00:1e.1: [10b9:7101] type 00 class 0x068000
[ 0.105879] pci 0000:00:1e.1: address space collision: [io 0x0800-0x083f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.105962] pci 0000:00:1f.0: [10b9:5229] type 00 class 0x01018a
[ 0.106009] pci 0000:00:1f.0: reg 0x20: [io 0xff00-0xff0f]
[ 0.106119] pci 0000:00:1f.1: [10b9:5287] type 00 class 0x010400
[ 0.106136] pci 0000:00:1f.1: reg 0x10: [io 0xec00-0xec0f]
[ 0.106146] pci 0000:00:1f.1: reg 0x14: [io 0xe480-0xe487]
[ 0.106156] pci 0000:00:1f.1: reg 0x18: [io 0xe400-0xe40f]
[ 0.106166] pci 0000:00:1f.1: reg 0x1c: [io 0xe080-0xe087]
[ 0.106176] pci 0000:00:1f.1: reg 0x20: [io 0xe000-0xe01f]
[ 0.106188] pci 0000:00:1f.1: reg 0x24: [mem 0xfebff400-0xfebff7ff]
[ 0.106223] pci 0000:00:1f.1: PME# supported from D3hot
[ 0.106328] pci 0000:01:05.0: [1002:5974] type 00 class 0x030000
[ 0.106336] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.106341] pci 0000:01:05.0: reg 0x14: [io 0xc800-0xc8ff]
[ 0.106347] pci 0000:01:05.0: reg 0x18: [mem 0xfe400000-0xfe40ffff]
[ 0.106361] pci 0000:01:05.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.106373] pci 0000:01:05.0: supports D1 D2
[ 0.106409] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.106413] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.106417] pci 0000:00:01.0: bridge window [mem 0xfe100000-0xfe9fffff]
[ 0.106421] pci 0000:00:01.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref]
[ 0.106510] pci 0000:02:10.0: [14f1:2f30] type 00 class 0x078000
[ 0.106531] pci 0000:02:10.0: reg 0x10: [mem 0xfeaf0000-0xfeafffff]
[ 0.106543] pci 0000:02:10.0: reg 0x14: [io 0xdc00-0xdc07]
[ 0.106627] pci 0000:02:10.0: PME# supported from D3hot D3cold
[ 0.106689] pci 0000:00:19.0: PCI bridge to [bus 02]
[ 0.106693] pci 0000:00:19.0: bridge window [io 0xd000-0xdfff]
[ 0.106698] pci 0000:00:19.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.106709] pci_bus 0000:00: on NUMA node 0
[ 0.107350] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
[ 0.107449] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.107546] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.107643] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.107740] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.107838] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.107935] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.108038] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
[ 0.108136] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.108211] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.108239] Found 1 acpi root devices
[ 0.108381] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.108383] vgaarb: loaded
[ 0.108384] vgaarb: bridge control possible 0000:01:05.0
[ 0.108662] SCSI subsystem initialized
[ 0.108729] libata version 3.00 loaded.
[ 0.108758] ACPI: bus type USB registered
[ 0.108790] usbcore: registered new interface driver usbfs
[ 0.108801] usbcore: registered new interface driver hub
[ 0.108829] usbcore: registered new device driver usb
[ 0.108958] PCI: Using ACPI for IRQ routing
[ 0.108961] PCI: pci_cache_line_size set to 64 bytes
[ 0.109010] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.109013] e820: reserve RAM buffer [mem 0x37fb0000-0x37ffffff]
[ 0.109118] NetLabel: Initializing
[ 0.109120] NetLabel: domain hash size = 128
[ 0.109122] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.109137] NetLabel: unlabeled traffic allowed by default
[ 0.109259] Switched to clocksource refined-jiffies
[ 0.115748] AppArmor: AppArmor Filesystem Enabled
[ 0.115793] pnp: PnP ACPI init
[ 0.115811] ACPI: bus type PNP registered
[ 0.115873] pnp 00:00: [dma 4]
[ 0.115906] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.115947] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.115972] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.116052] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.116509] pnp 00:04: [dma 3]
[ 0.116648] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.116873] system 00:05: [io 0x028d-0x028e] has been reserved
[ 0.116876] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.116879] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.116882] system 00:05: [io 0x0800-0x08bf] could not be reserved
[ 0.116885] system 00:05: [io 0x0500-0x051f] has been reserved
[ 0.116888] system 00:05: [io 0x08c0-0x08df] has been reserved
[ 0.116891] system 00:05: [io 0x0900-0x091f] has been reserved
[ 0.116896] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.116899] system 00:05: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.116902] system 00:05: [mem 0xf0000000-0xf0000fff] has been reserved
[ 0.116905] system 00:05: [mem 0xff6fe000-0xff6fefff] has been reserved
[ 0.116908] system 00:05: [mem 0xff6ff000-0xff6fffff] has been reserved
[ 0.116912] system 00:05: [mem 0xff780000-0xff7fffff] could not be reserved
[ 0.116915] system 00:05: [mem 0x38000000-0x3fffffff] has been reserved
[ 0.116919] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.116983] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.117049] pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.117122] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.117126] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.117129] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117357] pnp 00:09: [dma 0 disabled]
[ 0.117419] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.117640] pnp 00:0a: [dma 0 disabled]
[ 0.117704] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.117759] system 00:0b: [io 0x0290-0x0297] has been reserved
[ 0.117762] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117822] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.117826] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117981] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.117984] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.117987] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.117990] system 00:0d: [mem 0x00100000-0x37ffffff] could not be reserved
[ 0.117994] system 00:0d: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.117997] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.118141] pnp: PnP ACPI: found 14 devices
[ 0.118143] ACPI: bus type PNP unregistered
[ 0.118146] PnPBIOS: Disabled by ACPI PNP
[ 0.154257] Switched to clocksource acpi_pm
[ 0.154277] pci 0000:00:1e.1: BAR 13: [io 0x0800-0x083f] has bogus alignment
[ 0.154281] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.154285] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.154288] pci 0000:00:01.0: bridge window [mem 0xfe100000-0xfe9fffff]
[ 0.154292] pci 0000:00:01.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref]
[ 0.154296] pci 0000:00:19.0: PCI bridge to [bus 02]
[ 0.154300] pci 0000:00:19.0: bridge window [io 0xd000-0xdfff]
[ 0.154305] pci 0000:00:19.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.154314] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.154317] pci_bus 0000:00: resource 5 [mem 0x40000000-0xdfffffff]
[ 0.154320] pci_bus 0000:00: resource 6 [mem 0xe0000000-0xfcffffffff]
[ 0.154323] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.154326] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.154328] pci_bus 0000:01: resource 1 [mem 0xfe100000-0xfe9fffff]
[ 0.154331] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff 64bit pref]
[ 0.154334] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.154337] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.154379] NET: Registered protocol family 2
[ 0.154573] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.154598] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.154643] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.154686] TCP: reno registered
[ 0.154689] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.154701] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.154773] NET: Registered protocol family 1
[ 0.154785] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.154790] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.368135] PCI: CLS mismatch (64 != 512), using 64 bytes
[ 0.368140] pci 0000:01:05.0: Boot video device
[ 0.368214] Trying to unpack rootfs image as initramfs...
[ 0.789383] Freeing initrd memory: 18224K (f5c58000 - f6e24000)
[ 0.789596] microcode: AMD CPU family 0xf not supported
[ 0.789598] Scanning for low memory corruption every 60 seconds
[ 0.789908] Initialise system trusted keyring
[ 0.789967] audit: initializing netlink socket (disabled)
[ 0.789984] type=2000 audit(1401475469.787:1): initialized
[ 0.815838] bounce pool size: 64 pages
[ 0.815855] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.817443] zbud: loaded
[ 0.817513] VFS: Disk quotas dquot_6.5.2
[ 0.817568] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.818082] fuse init (API version 7.22)
[ 0.818171] msgmni has been set to 1740
[ 0.818236] Key type big_key registered
[ 0.818511] Key type asymmetric registered
[ 0.818514] Asymmetric key parser 'x509' registered
[ 0.818553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.818582] io scheduler noop registered
[ 0.818584] io scheduler deadline registered (default)
[ 0.818614] io scheduler cfq registered
[ 0.818756] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.818776] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.818826] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.818827] vesafb: scrolling: redraw
[ 0.818830] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.819104] vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 5120k, total 5120k
[ 0.958178] Console: switching to colour frame buffer device 160x64
[ 1.097144] fb0: VESA VGA frame buffer device
[ 1.097206] ipmi message handler version 39.2
[ 1.097278] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.097285] ACPI: Power Button [PWRB]
[ 1.097324] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.097327] ACPI: Power Button [PWRF]
[ 1.097428] GHES: HEST is not enabled!
[ 1.097511] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.118110] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.118165] isapnp: Scanning for PnP cards...
[ 1.187881] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.189071] Linux agpgart interface v0.103
[ 1.190655] brd: module loaded
[ 1.191399] loop: module loaded
[ 1.191953] libphy: Fixed MDIO Bus: probed
[ 1.192120] tun: Universal TUN/TAP device driver, 1.6
[ 1.192122] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.192170] PPP generic driver version 2.4.2
[ 1.192212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.192216] ehci-pci: EHCI PCI platform driver
[ 1.192343] ehci-pci 0000:00:1c.3: EHCI Host Controller
[ 1.192350] ehci-pci 0000:00:1c.3: new USB bus registered, assigned bus number 1
[ 1.192365] ehci-pci 0000:00:1c.3: debug port 1
[ 1.192437] ehci-pci 0000:00:1c.3: irq 23, io mem 0xfebff800
[ 1.236089] ehci-pci 0000:00:1c.3: USB 2.0 started, EHCI 1.00
[ 1.279848] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.279851] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.279853] usb usb1: Product: EHCI Host Controller
[ 1.279856] usb usb1: Manufacturer: Linux 3.13.0-27-generic ehci_hcd
[ 1.279858] usb usb1: SerialNumber: 0000:00:1c.3
[ 1.279969] hub 1-0:1.0: USB hub found
[ 1.279977] hub 1-0:1.0: 8 ports detected
[ 1.280203] ehci-platform: EHCI generic platform driver
[ 1.280214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.280216] ohci-pci: OHCI PCI platform driver
[ 1.280285] ohci-pci 0000:00:1c.0: OHCI PCI host controller
[ 1.280290] ohci-pci 0000:00:1c.0: new USB bus registered, assigned bus number 2
[ 1.280325] ohci-pci 0000:00:1c.0: irq 17, io mem 0xfebfc000
[ 1.413070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.413072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.413075] usb usb2: Product: OHCI PCI host controller
[ 1.413077] usb usb2: Manufacturer: Linux 3.13.0-27-generic ohci_hcd
[ 1.413080] usb usb2: SerialNumber: 0000:00:1c.0
[ 1.413169] hub 2-0:1.0: USB hub found
[ 1.413179] hub 2-0:1.0: 3 ports detected
[ 1.413318] ohci-pci 0000:00:1c.1: OHCI PCI host controller
[ 1.413323] ohci-pci 0000:00:1c.1: new USB bus registered, assigned bus number 3
[ 1.413357] ohci-pci 0000:00:1c.1: irq 18, io mem 0xfebfd000
[ 1.457099] isapnp: No Plug & Play device found
[ 1.470036] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.470039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.470041] usb usb3: Product: OHCI PCI host controller
[ 1.470044] usb usb3: Manufacturer: Linux 3.13.0-27-generic ohci_hcd
[ 1.470046] usb usb3: SerialNumber: 0000:00:1c.1
[ 1.470136] hub 3-0:1.0: USB hub found
[ 1.470144] hub 3-0:1.0: 3 ports detected
[ 1.470288] ohci-pci 0000:00:1c.2: OHCI PCI host controller
[ 1.470296] ohci-pci 0000:00:1c.2: new USB bus registered, assigned bus number 4
[ 1.470330] ohci-pci 0000:00:1c.2: irq 19, io mem 0xfebfe000
[ 1.526042] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.526045] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.526047] usb usb4: Product: OHCI PCI host controller
[ 1.526049] usb usb4: Manufacturer: Linux 3.13.0-27-generic ohci_hcd
[ 1.526052] usb usb4: SerialNumber: 0000:00:1c.2
[ 1.526140] hub 4-0:1.0: USB hub found
[ 1.526149] hub 4-0:1.0: 3 ports detected
[ 1.526246] ohci-platform: OHCI generic platform driver
[ 1.526260] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.526348] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.529449] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.529455] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.529562] mousedev: PS/2 mouse device common for all mice
[ 1.529684] rtc_cmos 00:01: RTC can wake from S4
[ 1.529813] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.529851] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 1.529934] device-mapper: uevent: version 1.0.3
[ 1.529991] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.530010] platform eisa.0: Probing EISA bus 0
[ 1.530014] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.530017] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.530020] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.530023] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.530025] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.530028] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.530031] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.530034] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.530036] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.530039] platform eisa.0: EISA: Detected 0 cards
[ 1.530046] cpufreq-nforce2: No nForce2 chipset.
[ 1.530049] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.530197] TCP: cubic registered
[ 1.530299] NET: Registered protocol family 10
[ 1.530505] NET: Registered protocol family 17
[ 1.530519] Key type dns_resolver registered
[ 1.530662] Using IPI No-Shortcut mode
[ 1.530733] Loading compiled-in X.509 certificates
[ 1.534646] Loaded X.509 cert 'Magrathea: Glacier signing key: db1581f77108a8ff5912f3a246ddedfbae7eab8d'
[ 1.534660] registered taskstats version 1
[ 1.537077] Key type trusted registered
[ 1.539126] Key type encrypted registered
[ 1.541197] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.541203] IMA: No TPM chip found, activating TPM-bypass!
[ 1.541384] regulator-dummy: disabling
[ 1.541426] Magic number: 14:841:747
[ 1.541533] rtc_cmos 00:01: setting system clock to 2014-05-30 18:44:31 UTC (1401475471)
[ 1.541662] powernow-k8: fid 0xe (2200 MHz), vid 0x8
[ 1.541664] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[ 1.541666] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[ 1.541667] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.541691] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ (1 cpu cores) (version 2.20.00)
[ 1.541697] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.541698] EDD information not available.
[ 1.541735] PM: Hibernation image not present or could not be loaded.
[ 1.542318] Freeing unused kernel memory: 872K (c19b2000 - c1a8c000)
[ 1.542387] Write protecting the kernel text: 6524k
[ 1.542457] Write protecting the kernel read-only data: 2760k
[ 1.542458] NX-protecting the kernel data: 5764k
[ 1.550996] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.560225] systemd-udevd[90]: starting version 204
[ 1.606666] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 1.650220] uli526x 0000:00:1b.0 eth0: ULi M5263 at pci0000:00:1b.0, 00:17:31:26:7f:55, irq 20
[ 1.654719] scsi0 : pata_ali
[ 1.660672] scsi1 : pata_ali
[ 1.660729] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.660731] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.660939] sata_uli 0000:00:1f.1: version 1.3
[ 1.660946] sata_uli 0000:00:1f.1: enabling device (0105 -> 0107)
[ 1.663974] scsi2 : sata_uli
[ 1.667177] scsi3 : sata_uli
[ 1.670153] scsi4 : sata_uli
[ 1.671977] scsi5 : sata_uli
[ 1.672140] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 21
[ 1.672144] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 21
[ 1.672148] ata5: SATA max UDMA/133 cmd 0xec08 ctl 0xe486 bmdma 0xe010 cmd 0xe409 ctl 0xe086 bmdma 0xe018 irq 21
[ 1.672151] ata6: SATA max UDMA/133 irq 21
[ 1.884029] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 1.980355] ata2.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
[ 1.980359] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 1.980361] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 1.996294] ata2.00: configured for UDMA/33
[ 1.997789] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5
[ 1.999476] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.999478] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.999591] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.999715] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.029982] usb 1-5: New USB device found, idVendor=05e3, idProduct=0710
[ 2.029985] usb 1-5: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 2.029988] usb 1-5: Product: USB2.0 Reader
[ 2.029990] usb 1-5: Manufacturer: Foxconn
[ 2.029993] usb 1-5: SerialNumber: 000000000974
[ 2.140062] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.165587] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 2.165666] scsi6 : usb-storage 1-5:1.0
[ 2.165948] usbcore: registered new interface driver usb-storage
[ 2.184587] ata3.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133
[ 2.184591] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.251213] ata3.00: configured for UDMA/133
[ 2.251338] scsi 2:0:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5
[ 2.251534] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.251591] sd 2:0:0:0: [sda] Write Protect is off
[ 2.251594] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.251619] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.251802] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.309531] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 2.309921] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.336040] usb 2-2: new full-speed USB device number 2 using ohci-pci
[ 2.596467] usb 2-2: New USB device found, idVendor=0644, idProduct=0000
[ 2.596470] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.596472] usb 2-2: Product: TEAC FD-05PUW
[ 2.596475] usb 2-2: Manufacturer: TEAC
[ 2.599514] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2.599616] scsi7 : usb-storage 2-2:1.0
[ 2.888001] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 3.169004] scsi 6:0:0:0: Direct-Access Foxconn CF USB2.0 Reade 9144 PQ: 0 ANSI: 0
[ 3.172991] scsi 6:0:0:1: Direct-Access Foxconn SM USB2.0 Reade 9144 PQ: 0 ANSI: 0
[ 3.176989] scsi 6:0:0:2: Direct-Access Foxconn SD USB2.0 Reade 9144 PQ: 0 ANSI: 0
[ 3.180987] scsi 6:0:0:3: Direct-Access Foxconn MS USB2.0 Reade 9144 PQ: 0 ANSI: 0
[ 3.181236] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.181409] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 3.181553] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 3.181705] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 3.190999] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.204124] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.208124] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.209240] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 3.629491] scsi 7:0:0:0: Direct-Access TEAC FD-05PUW 3000 PQ: 0 ANSI: 0 CCS
[ 3.629777] sd 7:0:0:0: Attached scsi generic sg6 type 0
[ 3.725488] sd 7:0:0:0: [sdf] Attached SCSI removable disk
[ 4.015903] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 4.015909] EXT4-fs (sda6): write access will be enabled during recovery
[ 5.216223] random: nonblocking pool is initialized
[ 5.953666] EXT4-fs (sda6): orphan cleanup on readonly fs
[ 5.953852] EXT4-fs (sda6): 7 orphan inodes deleted
[ 5.953854] EXT4-fs (sda6): recovery complete
[ 5.999168] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.691965] Adding 915452k swap on /dev/sda5. Priority:-1 extents:1 across:915452k FS
[ 14.758992] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.015654] systemd-udevd[270]: starting version 204
[ 15.464305] type=1400 audit(1401489885.420:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=302 comm="apparmor_parser"
[ 15.464315] type=1400 audit(1401489885.420:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=302 comm="apparmor_parser"
[ 15.464321] type=1400 audit(1401489885.420:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=302 comm="apparmor_parser"
[ 15.464922] type=1400 audit(1401489885.420:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=302 comm="apparmor_parser"
[ 15.464929] type=1400 audit(1401489885.420:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=302 comm="apparmor_parser"
[ 15.465237] type=1400 audit(1401489885.420:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=302 comm="apparmor_parser"
[ 15.470517] type=1400 audit(1401489885.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=313 comm="apparmor_parser"
[ 15.570829] lp: driver loaded but no devices found
[ 15.646068] ppdev: user-space parallel port driver
[ 15.663426] parport_pc 00:04: reported by Plug and Play ACPI
[ 15.663580] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 15.716447] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.760513] lp0: using parport0 (interrupt-driven).
[ 15.942083] ali1535_smbus 0000:00:1e.1: device not available (can't reserve [io 0x0800-0x083f])
[ 15.943465] ali1535_smbus 0000:00:1e.1: ALI1535_smb can't enable device
[ 15.944638] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
[ 16.146322] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 16.147911] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted.
[ 16.879700] [drm] Initialized drm 1.1.0 20060810
[ 17.426914] [drm] radeon kernel modesetting enabled.
[ 17.426991] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[ 17.426994] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 17.427074] Console: switching to colour dummy device 80x25
[ 17.430642] [drm] initializing kernel modesetting (RS480 0x1002:0x5974 0x1043:0x8185).
[ 17.430663] [drm] register mmio base: 0xFE400000
[ 17.430665] [drm] register mmio size: 65536
[ 17.431540] [drm] Generation 2 PCI interface, using max accessible memory
[ 17.431546] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
[ 17.431550] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 17.431563] [drm] Detected VRAM RAM=128M, BAR=256M
[ 17.431565] [drm] RAM width 128bits DDR
[ 17.431630] [TTM] Zone kernel: Available graphics memory: 446038 kiB
[ 17.431631] [TTM] Zone highmem: Available graphics memory: 447930 kiB
[ 17.431633] [TTM] Initializing pool allocator
[ 17.431638] [TTM] Initializing DMA pool allocator
[ 17.431660] [drm] radeon: 128M of VRAM memory ready
[ 17.431662] [drm] radeon: 512M of GTT memory ready.
[ 17.431675] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 17.438587] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[ 17.443706] [drm] PCIE GART of 512M enabled (table at 0x0000000034880000).
[ 17.443838] radeon 0000:01:05.0: WB enabled
[ 17.443843] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000040000000 and cpu addr 0xf3168000
[ 17.443846] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 17.443847] [drm] Driver supports precise vblank timestamp query.
[ 17.443858] [drm] radeon: irq initialized.
[ 17.443870] [drm] Loading R300 Microcode
[ 17.590293] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 17.590298] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.590300] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 17.590302] mono: mono_out=0x0
[ 17.590303] dig-out=0x1e/0x0
[ 17.590304] inputs:
[ 17.590306] Rear Mic=0x18
[ 17.590308] Front Mic=0x19
[ 17.590310] Line=0x1a
[ 17.590311] CD=0x1c
[ 17.590313] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[ 17.590314] realtek: Enable default setup for auto mode as fallback
[ 17.599630] input: HDA ULI M5461 Front Headphone as /devices/pci0000:00/0000:00:1d.0/sound/card0/input12
[ 17.599861] input: HDA ULI M5461 Line Out Side as /devices/pci0000:00/0000:00:1d.0/sound/card0/input11
[ 17.600090] input: HDA ULI M5461 Line Out CLFE as /devices/pci0000:00/0000:00:1d.0/sound/card0/input10
[ 17.600283] input: HDA ULI M5461 Line Out Surround as /devices/pci0000:00/0000:00:1d.0/sound/card0/input9
[ 17.600475] input: HDA ULI M5461 Line Out Front as /devices/pci0000:00/0000:00:1d.0/sound/card0/input8
[ 17.600666] input: HDA ULI M5461 Line as /devices/pci0000:00/0000:00:1d.0/sound/card0/input7
[ 17.600856] input: HDA ULI M5461 Front Mic as /devices/pci0000:00/0000:00:1d.0/sound/card0/input6
[ 17.601058] input: HDA ULI M5461 Rear Mic as /devices/pci0000:00/0000:00:1d.0/sound/card0/input5
[ 17.633465] [drm] radeon: ring at 0x0000000040001000
[ 17.633493] [drm] ring test succeeded in 3 usecs
[ 17.633666] [drm] ib test succeeded in 0 usecs
[ 17.638355] [drm] Radeon Display Connectors
[ 17.638360] [drm] Connector 0:
[ 17.638362] [drm] VGA-1
[ 17.638364] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 17.638366] [drm] Encoders:
[ 17.638367] [drm] CRT1: INTERNAL_DAC2
[ 17.638369] [drm] Connector 1:
[ 17.638370] [drm] SVIDEO-1
[ 17.638372] [drm] Encoders:
[ 17.638373] [drm] TV1: INTERNAL_DAC2
[ 17.687164] [drm] fb mappable at 0xC0040000
[ 17.687168] [drm] vram apper at 0xC0000000
[ 17.687170] [drm] size 5242880
[ 17.687171] [drm] fb depth is 24
[ 17.687173] [drm] pitch is 5120
[ 17.687597] fbcon: radeondrmfb (fb0) is primary device
[ 17.740654] Console: switching to colour frame buffer device 160x64
[ 17.750156] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 17.750159] radeon 0000:01:05.0: registered panic notifier
[ 17.753811] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0
[ 19.022449] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 19.430688] init: failsafe main process (566) killed by TERM signal
[ 19.991977] type=1400 audit(1401489889.944:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=620 comm="apparmor_parser"
[ 19.991990] type=1400 audit(1401489889.944:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=620 comm="apparmor_parser"
[ 19.999119] type=1400 audit(1401489889.952:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=620 comm="apparmor_parser"
[ 20.618083] Bluetooth: Core ver 2.17
[ 20.622512] NET: Registered protocol family 31
[ 20.622516] Bluetooth: HCI device and connection manager initialized
[ 20.623032] Bluetooth: HCI socket layer initialized
[ 20.623038] Bluetooth: L2CAP socket layer initialized
[ 20.623046] Bluetooth: SCO socket layer initialized
[ 20.668810] init: cups main process (623) killed by HUP signal
[ 20.668827] init: cups main process ended, respawning
[ 20.750464] Bluetooth: RFCOMM TTY layer initialized
[ 20.750479] Bluetooth: RFCOMM socket layer initialized
[ 20.750492] Bluetooth: RFCOMM ver 1.11
[ 20.760703] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.760709] Bluetooth: BNEP filters: protocol multicast
[ 20.760720] Bluetooth: BNEP socket layer initialized
[ 21.953676] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.954244] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.149478] type=1400 audit(1401489892.104:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=812 comm="apparmor_parser"
[ 22.149491] type=1400 audit(1401489892.104:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=812 comm="apparmor_parser"
[ 22.149865] type=1400 audit(1401489892.104:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=812 comm="apparmor_parser"
[ 22.154003] type=1400 audit(1401489892.108:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=813 comm="apparmor_parser"
[ 22.154016] type=1400 audit(1401489892.108:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=813 comm="apparmor_parser"
[ 22.154022] type=1400 audit(1401489892.108:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=813 comm="apparmor_parser"
[ 22.154626] type=1400 audit(1401489892.108:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=813 comm="apparmor_parser"
[ 22.154632] type=1400 audit(1401489892.108:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=813 comm="apparmor_parser"
[ 22.154938] type=1400 audit(1401489892.108:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=813 comm="apparmor_parser"
[ 22.169414] type=1400 audit(1401489892.124:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=814 comm="apparmor_parser"
[ 24.064253] init: plymouth-upstart-bridge main process ended, respawning
[ 24.094017] init: plymouth-upstart-bridge main process ended, respawning
[ 24.960375] uli526x 0000:00:1b.0 eth0: NIC Link is Up 100 Mbps Full duplex
[ 24.960406] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 50.088964] audit_printk_skb: 75 callbacks suppressed
[ 50.088970] type=1400 audit(1401475519.412:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1588 comm="apparmor_parser"
[ 50.088979] type=1400 audit(1401475519.412:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1588 comm="apparmor_parser"
[ 50.089572] type=1400 audit(1401475519.412:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1588 comm="apparmor_parser"
remi@remi-System-Product-Name:~$ Hors ligne
#39 Le 30/05/2014, à 21:27
- spinoziste
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Ok . On va se focaliser sur fglrx .
Pouvez-vous entrer :
sudo apt-get install fglrx fglrx-amdcccleEnsuite redémarrez .
Dernière modification par spinoziste (Le 30/05/2014, à 21:33)
Nous mourrons tous .
Hors ligne
#40 Le 30/05/2014, à 22:00
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
C'est fait, mais on a empiré les choses.
Je passe actuellement par ma partition Windows car je ne peux plus rien faire du côté Lubuntu.
Au redémarrage, mon écran d'accueil est apparu avec un rectangle au centre décrivant ma résolution d'écran. Puis, ma page d'accueil a disparu, remplacée par un écran noir dans lequel le rectangle en question se déplace de gauche à droite et en diagonale; se cognant dans les coins et repartant dans une autre direction ( un peu comme un des premiers jeux vidéos, mais en plus lent).
Comment procède-t-on, à part réinstaller Lubuntu ou autre?
Hors ligne
#41 Le 30/05/2014, à 22:58
- spinoziste
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Si vous êtes branché sur le réseau par câble il va falloir démarrer le mode recovery (disponible à partir de GRUB) .
À partir de là lancez la commande :
sudo apt-get purge fglrx fglrx-amdcccleensuite :
sudo dpkg-reconfigure xserver-xorgEnsuite redémarrez .
Il est vrai que réinstaller peut être plus rapide et moins fastidieux .
Dernière modification par spinoziste (Le 30/05/2014, à 22:59)
Nous mourrons tous .
Hors ligne
#42 Le 30/05/2014, à 23:38
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Je vous écris cette fois-ci encore via Windows.
J'ai accès au terminal via Grub et le mode recovery. Par contre, mes commandes sont refusées.
Donc, je prend la façon facile et réinstalle le tout. Je ne perds que quelques favoris récents sur Firefox.
Je reviens dans quelques jours voir si la solution est trouvée.
J'ai quand même constaté que beaucoup de gens avaient des problèmes d'affichage divers après l'installation d'une version ou l'autre de Ubuntu.
Hors ligne
#43 Le 31/05/2014, à 00:39
- spinoziste
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Ça coince un peu parfois mais des qu'on trouve la solution c'est que du bonheur .
Nous mourrons tous .
Hors ligne
#44 Le 01/06/2014, à 15:27
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Rebonjour,
Voici le résumé et plus bas l'histoire longue.
1e: Puisque je perdais tout ce qui était affiché à l'écran, j'ai tout de suite mis la faute sur ma carte graphique qui aurait une incompatibilité avec Linux. Je me trompais.
2e: Suite à tous mes problèmes d'écran qui faisait place à un rideau blanc décoré ou non de lignes verticales, j'ai essayé plusieurs versions de Ubuntu sans succès sauf pour Lubuntu qui est le plus stable pour moi.
Après avoir tenté d'installer "fglrx" afin de corriger l'affichage et avoir eu d'autres pépins, j'ai pris la chance de tenter une autre mouture soit "Linux Mint" qui était chaudement recommandé pour un novice comme moi.
Et là le pire s'est produit: j'ai perdu l'affichage à l'écran lors de son installation. Sur le coup, j'ai été déçu mais je n'ai pas paniqué car j'ai calculé que ça prenait environ 30 minutes pour l'installation une fois les renseignements entrés, ce qui était fait.
Alors, j'ai attendu 2 heures et j'ai appuyé sur "Enter" pour relançer et j'ai fait face à l'ampleur du désastre.
Linux Mint ne s'était pas installé. J'avais perdu l'accès à Windows car Grub et MBR n'y étaient plus.
J'ai dû apprendre rapidement à utiliser le Réparateur d'amorçage pour avoir au moins accès à Windows.
En voulant réinstaller Lubuntu, je me suis aperçu que la partition sur laquelle je voulais qu'elle aille ne m'était plus accessible à moins d'apprendre à utiliser GParted; ce que j'ai faitl.
J'ai réussi ma réinstallation et constaté que Grub ne fonctionnait pas: nouvelle réparation du Grub
Ça fonctionne maintenant, mais ça fait beaucoup de nouvelles connaissances apprises en peu de temps pour quelqu'un à l'aube de ses 60 ans.
Donc, mon problème n'est plus dans la bonne section. Si quelqu'un a une suggestion, elle est la bienvenue. Je vais aller vérifier dans les autres parties de ce forum pour trouver des astuces.
Il semblerait d'après l'ensemble de mes avaries que mon système "gèle".
À noter toujours que je n'ai absolument pas ce problème avec Windows, uniquement avec Linux peut importe la version et pire dans quelques-unes.
Hors ligne
#45 Le 05/06/2014, à 02:36
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Mes problèmes d'écran sont réapparus.
À croire que mon ordinateur est allergique à Linux.
Mêmes symptômes, contenu de l'écran qui disparaît soudainement, remplacé par un rideau de barres verticales 2 tons bleu / gris.
Et aucune possibilité de redémarrer quoi que ce soit par les combinaisons de touches débutant par "CTRL".
Comme si l'ordinateur ne répondait plus.
Les tentatives de modifier les paramètres de l'écran se sont soldés par une réinstallation obligatoire. Donc ce ne serait pas la bonne piste.
Quelqu'un a une idée? Ou a déjà eu le problème.
J'ai réinstallé Lubuntu 14.04 dimanche dernier car c'est ce qui me plaisait le plus.
Mon ordi tourne à 2 Gz, a un disque dur de 250 Go et 1 G de mémoire vive. Il a fait tourner Windows XP Media Center Édition Professionnelle durant 8 ans et n'a aucun problème sous Microsoft.
Qu'est-ce qui peut faire qu'il n'arrive pas à supporter une version Linux si légère?
Hors ligne
#46 Le 05/06/2014, à 12:24
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Toujours au sujet de mon problème d'affichage,
Sur le site de ATI, il y aurait un pilote qui fonctionnerait pour ma carte graphique. Mais je ne sais pas comment l'installer sous Lubuntu ou toute autre variante Linux.
C'est un énorme fichier-texte incompréhensible pour moi. Je l'avais téléchargé il y a deux semaine et quand j'ai vu ce que c'était et ne sachant pas quoi en faire, je l'ai mis à la corbeille.
Je vais le re-télécharger, quelqu'un pourrait me dire comment l'installer?
Je n'ai rien à perdre à l'essayer, de toute façon je tombe en panne sans préavis dans la configuration actuelle...
Hors ligne
#47 Le 05/06/2014, à 12:28
- alca94
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Je vais le re-télécharger, quelqu'un pourrait me dire comment l'installer?
il faudrait donner le lien de téléchargement pour voir et pouvoir vous conseillé
POUR METTRE LES RETOURS DU "TERMINAL" voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641
Hors ligne
#48 Le 05/06/2014, à 16:39
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Voici le lien en question:
Hors ligne
#49 Le 05/06/2014, à 17:11
- alca94
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Normalement c'est assez simple = vous téléchargez le fichier puis vous ouvrez le terminal =tapez sudo (faire un espace)glisser -déposer le fichier .run et faire "Entrée" après faut suivre les demandes
Possible également comme ceci
http://forum.ubuntu-fr.org/viewtopic.ph … 1#p7019771
Dernière modification par alca94 (Le 05/06/2014, à 18:25)
POUR METTRE LES RETOURS DU "TERMINAL" voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641
Hors ligne
#50 Le 05/06/2014, à 17:27
- Rémi-2
Re : (ABANDONNÉ) Perd tout le contenu du bureau
Merci,
Je fais l'essai dès mon retour du travail.
Hors ligne