Ubuntu-fr

cflam69

[Résolu] Gutsy a perdu mon DD slave ?!

Bonjour à toute la communauté,

Bon ben voilà, j'ai migré de Feisty à Gutsy... tout est ok sauf que mon DD esclave n'est plus du tout reconnu depuis ?!
En fait, il apparait dans dmesg seulement. Ensuite, il n'existe ni dans fstab, n'est pas reconnu par Gparted, ni fdisk -l, ni testdisk (même en sudo).

Cette partition (en fait l'ancien DD principal de mon PC contenant Windows en dualBoot, W$ qui fonctionne) est sur hdb. Mais rien.

Je vous remercie d'avance de l'aide que vous pourrez m'apporter.

PS: c'est pas que W$ me manque , c'est juste pour comprendre la disparition de mon hdb.

Quelques infos tout de même :

$ sudo fdisk -l

Disque /dev/hda: 120.0 Go, 120034123776 octets
255 heads, 63 sectors/track, 14593 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Disk identifier: 0x7f61a189

Périphérique Amorce    Début         Fin      Blocs    Id  Système
/dev/hda1   *           1        1459    11719386   83  Linux
/dev/hda2            1460       14593   105498855    5  Extended
/dev/hda5           14454       14593     1124518+  82  Linux swap / Solaris
/dev/hda6            1460        6322    39061984+  83  Linux
/dev/hda7            6323       13617    58597056   83  Linux
/dev/hda8           13618       14453     6715138+  83  Linux

Les entrées de la table de partitions ne sont pas dans l'ordre du disque

Disque /dev/sda: 250.0 Go, 250059350016 octets
255 heads, 63 sectors/track, 30401 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Disk identifier: 0x8f9c798a

Périphérique Amorce    Début         Fin      Blocs    Id  Système
/dev/sda1               1        1275    10241406   83  Linux
/dev/sda2            1276       30401   233954595    5  Extended
/dev/sda5            1276        1402     1020096   83  Linux
/dev/sda6            1403        3825    19462716   83  Linux
/dev/sda7            3826       11279    59874223+  83  Linux
/dev/sda8           11280       13829    20482843+  83  Linux
/dev/sda9           13830       30401   133114558+  83  Linux

$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/hda1
UUID=286e300a-33dd-45d2-93aa-39baca12fecf /               reiserfs notail          0       1
# /dev/hda6
UUID=66ecc748-3ca5-459d-be07-c2ddeb8fa7a8 /home           ext3    defaults        0       2
# /dev/hda7
UUID=f043c092-ad45-45a4-b765-0ff186fa79c9 /media/hda7     ext3    defaults        0       2
# /dev/hda8
UUID=e5220519-4aac-400f-bfb8-47974abbdebf /media/hda8     ext3    defaults        0       2
# /dev/hdb2
UUID=2C2C-1AFC  /media/hdb2     vfat    defaults,utf8,umask=007,gid=46 0       1
# /dev/hdb5
UUID=44B2-9333  /media/hdb5     vfat    defaults,utf8,umask=007,gid=46 0       1
# /dev/hda5
UUID=d24bd626-ddc0-445b-afae-dc3a50f5dcfa none            swap    sw              0       0
/dev/hdc        /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/hdd        /media/cdrom1   udf,iso9660 user,noauto     0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

[  117.195469] Early unpacking initramfs... done
[  118.083231] ACPI: Core revision 20070126
[  118.083434] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[  118.086422] ACPI: setting ELCR to 0008 (from 0e20)
[  118.086784] CPU0: AMD Duron(tm) Processor stepping 01
[  118.086797] SMP motherboard not detected.
[  118.086804] Local APIC not detected. Using dummy APIC emulation.
[  118.086903] Brought up 1 CPUs
[  118.087218] Booting paravirtualized kernel on bare hardware
[  118.087368] Time: 10:24:39  Date: 09/21/107
[  118.087443] NET: Registered protocol family 16
[  118.087726] EISA bus registered
[  118.087754] ACPI: bus type pci registered
[  118.112398] PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
[  118.112405] PCI: Using configuration type 1
[  118.112411] Setting up standard PCI resources
[  118.115935] ACPI: EC: Look up EC in DSDT
[  118.122586] ACPI: Interpreter enabled
[  118.122602] ACPI: (supports S0 S1 S4 S5)
[  118.122644] ACPI: Using PIC for interrupt routing
[  118.131906] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  118.131944] PCI: Probing PCI hardware (bus 00)
[  118.132153] Disabling VIA memory write queue (PCI ID 0305, rev 81): [55] b8 & 3f -> 38
[  118.132446] PCI quirk: region 0c00-0c7f claimed by vt82c686 HW-mon
[  118.132455] PCI quirk: region 0400-040f claimed by vt82c686 SMB
[  118.132977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  118.136521] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[  118.136746] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[  118.136955] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[  118.137161] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[  118.137474] ACPI: Power Resource [URP1] (off)
[  118.137542] ACPI: Power Resource [URP2] (off)
[  118.137727] ACPI: Power Resource [FDDP] (off)
[  118.137799] ACPI: Power Resource [LPTP] (off)
[  118.137839] Linux Plug and Play Support v0.97 (c) Adam Belay
[  118.137896] pnp: PnP ACPI init
[  118.137931] ACPI: bus type pnp registered
[  118.142822] pnp: PnP ACPI: found 10 devices
[  118.142833] ACPI: ACPI bus type pnp unregistered
[  118.142847] PnPBIOS: Disabled by ACPI PNP
[  118.143013] PCI: Using ACPI for IRQ routing
[  118.143022] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  118.145459] NET: Registered protocol family 8
[  118.145466] NET: Registered protocol family 20
[  118.145611] Time: tsc clocksource has been installed.
[  118.176720] PCI: Bridge: 0000:00:01.0
[  118.176732]   IO window: 9000-9fff
[  118.176742]   MEM window: dde00000-dfefffff
[  118.176751]   PREFETCH window: cdc00000-ddcfffff
[  118.176778] PCI: Setting latency timer of device 0000:00:01.0 to 64
[  118.176823] NET: Registered protocol family 2
[  118.213714] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[  118.213856] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[  118.214642] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[  118.215288] TCP: Hash tables configured (established 16384 bind 16384)
[  118.215298] TCP reno registered
[  118.225944] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[  119.014150]  it is
[  119.928882] Freeing initrd memory: 7098k freed
[  119.929896] audit: initializing netlink socket (disabled)
[  119.929932] audit(1192962280.552:1): initialized
[  119.935277] VFS: Disk quotas dquot_6.5.1
[  119.935444] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  119.935708] io scheduler noop registered
[  119.935716] io scheduler anticipatory registered
[  119.935722] io scheduler deadline registered
[  119.935771] io scheduler cfq registered (default)
[  119.935805] Applying VIA southbridge workaround.
[  119.935813] PCI: VIA PCI bridge detected. Disabling DAC.
[  119.935822] PCI: Disabling Via external APIC routing
[  119.935903] Boot video device is 0000:01:00.0
[  119.936356] isapnp: Scanning for PnP cards...
[  120.291065] isapnp: No Plug & Play device found
[  120.406311] Real Time Clock Driver v1.12ac
[  120.406523] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  120.406699] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  120.409498] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  120.411680] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  120.412224] input: Macintosh mouse button emulation as /class/input/input0
[  120.412441] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[  120.412930] serio: i8042 KBD port at 0x60,0x64 irq 1
[  120.412945] serio: i8042 AUX port at 0x60,0x64 irq 12
[  120.413448] mice: PS/2 mouse device common for all mice
[  120.413773] EISA: Probing bus 0 at eisa.0
[  120.413844] EISA: Detected 0 cards.
[  120.414091] TCP cubic registered
[  120.414116] NET: Registered protocol family 1
[  120.414170] Using IPI No-Shortcut mode
[  120.414620]   Magic number: 11:37:427
[  120.416035] Freeing unused kernel memory: 364k freed
[  122.078281] AppArmor: AppArmor initialized<5>audit(1192962282.552:2):  type=1505 info="AppArmor initialized" pid=1168
[  122.097329] fuse init (API version 7.8)
[  122.111647] Failure registering capabilities with primary security module.
[  122.146680] ACPI: Processor [CPU1] (supports 16 throttling states)
[  123.853377] SCSI subsystem initialized
[  123.867105] libata version 2.21 loaded.
[  123.882090] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  123.882106] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  123.884061] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[  123.884109] VP_IDE: chipset revision 6
[  123.884116] VP_IDE: not 100% native mode: will probe irqs later
[  123.884139] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
[  123.884155]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[  123.884181]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[  123.884198] Probing IDE interface ide0...
[  123.925770] usbcore: registered new interface driver usbfs
[  123.925829] usbcore: registered new interface driver hub
[  123.925887] usbcore: registered new device driver usb
[  123.928488] USB Universal Host Controller Interface driver v3.0
[  124.105900] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[  124.212464] 8139too Fast Ethernet driver 0.9.28
[  124.363896] hda: WDC WD1200JB-00GVA0, ATA DISK drive
[  124.399284] Floppy drive(s): fd0 is 1.44M
[  124.424554] FDC 0 is a post-1991 82077
[  124.643764] hdb: ST320413A, ATA DISK drive
[  124.702302] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[  124.724043] Probing IDE interface ide1...
[  125.587486] hdc: PIONEER DVD-ROM DVD-115, ATAPI CD/DVD-ROM drive
[  126.371227] hdd: SAMSUNG CD-R/RW DRIVE SW-212B, ATAPI CD/DVD-ROM drive
[  126.427630] ide1 at 0x170-0x177,0x376 on irq 15
[  126.431801] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[  126.431816] PCI: setting IRQ 9 as level-triggered
[  126.431825] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[  126.431855] uhci_hcd 0000:00:07.2: UHCI Host Controller
[  126.432871] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[  126.432924] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000cc00
[  126.434499] usb usb1: configuration #1 chosen from 1 choice
[  126.435181] hub 1-0:1.0: USB hub found
[  126.435215] hub 1-0:1.0: 2 ports detected
[  126.452708] hda: max request size: 512KiB
[  126.513267] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
[  126.515228] hda: cache flushes supported
[  126.515339]  hda: hda1 hda2 <<6>ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[  126.539342] uhci_hcd 0000:00:07.3: UHCI Host Controller
[  126.539421] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[  126.539461] uhci_hcd 0000:00:07.3: irq 9, io base 0x0000d000
[  126.539740] usb usb2: configuration #1 chosen from 1 choice
[  126.539813] hub 2-0:1.0: USB hub found
[  126.539837] hub 2-0:1.0: 2 ports detected
[  126.545797]  hda5 hda6 hda7 hda8 >
[  126.585462] hdb: max request size: 128KiB
[  126.585734] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
[  126.585748]  printing eip:
[  126.585753] c01fe8ab
[  126.585757] *pde = 00000000
[  126.585765] Oops: 0000 [#1]
[  126.585769] SMP 
[  126.585776] Modules linked in: ide_cd cdrom ide_disk floppy 8139too mii ehci_hcd ohci_hcd uhci_hcd usbcore via82cxxx ide_core ata_generic libata scsi_mod thermal processor fan fuse apparmor commoncap
[  126.585817] CPU:    0
[  126.585820] EIP:    0060:[<c01fe8ab>]    Not tainted VLI
[  126.585824] EFLAGS: 00010246   (2.6.22-14-generic #1)
[  126.585849] EIP is at strstr+0x1b/0x50
[  126.585856] eax: 00000000   ebx: 00000000   ecx: ffffffff   edx: 00000000
[  126.585866] esi: d7e6782e   edi: 00000000   ebp: d890cfe4   esp: d7b53cd4
[  126.585874] ds: 007b   es: 007b   fs: 00d8  gs: 0033  ss: 0068
[  126.585884] Process modprobe (pid: 2167, ti=d7b52000 task=d7cd0f90 task.ti=d7b52000)
[  126.585890] Stack: d7e67836 d890d121 d7e67840 d88ca985 d7e67800 d88da4b4 d7c6b4c0 0254a781 
[  126.585909]        00000000 d890b6ad 00000000 c12c2860 00000000 00000000 c017c602 c12f3d40 
[  126.585924]        00000000 00000000 c017c602 ffffffff d7b53dc4 0000000a d88da4b4 0254a780 
[  126.585940] Call Trace:
[  126.585948]  [<d88ca985>] ide_in_drive_list+0x45/0x80 [ide_core]
[  126.586020]  [<d890b6ad>] idedisk_check_hpa+0xad/0x470 [ide_disk]
[  126.586041]  [<c017c602>] __slab_alloc+0x2b2/0x4f0
[  126.586061]  [<c017c602>] __slab_alloc+0x2b2/0x4f0
[  126.586079]  [<c01286f7>] release_console_sem+0x1c7/0x1f0
[  126.586105]  [<d88c7f60>] task_no_data_intr+0x0/0xa0 [ide_core]
[  126.586138]  [<d88cbac8>] ide_add_setting+0x48/0x50 [ide_core]
[  126.586171]  [<d890c4d8>] ide_disk_probe+0x468/0x700 [ide_disk]
[  126.586190]  [<d88c008f>] generic_ide_probe+0x1f/0x30 [ide_core]
[  126.586216]  [<c026110e>] driver_probe_device+0x8e/0x190
[  126.586231]  [<c026137e>] __driver_attach+0x9e/0xa0
[  126.586241]  [<c02604fb>] bus_for_each_dev+0x3b/0x60
[  126.586264]  [<c0260f86>] driver_attach+0x16/0x20
[  126.586273]  [<c02612e0>] __driver_attach+0x0/0xa0
[  126.586281]  [<c02608ca>] bus_add_driver+0x8a/0x1b0
[  126.586295]  [<c014a7d1>] sys_init_module+0x151/0x1a00
[  126.586307]  [<c01fb39f>] prio_tree_insert+0x1f/0x250
[  126.586338]  [<c0104252>] syscall_call+0x7/0xb
[  126.586355]  =======================
[  126.586359] Code: 5b c3 90 90 90 90 90 90 90 90 90 90 90 90 90 90 83 ec 0c b9 ff ff ff ff 89 1c 24 89 d3 89 74 24 04 89 c6 31 c0 89 7c 24 08 89 df <f2> ae f7 d1 49 89 ca 89 df 89 f0 89 d1 f3 a6 74 0a 96 46 80 78 
[  126.586424] EIP: [<c01fe8ab>] strstr+0x1b/0x50 SS:ESP 0068:d7b53cd4
[  126.643956] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[  126.643974] PCI: setting IRQ 5 as level-triggered
[  126.643984] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[  126.644017] ohci_hcd 0000:00:09.0: OHCI Host Controller
[  126.644116] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3
[  126.644163] ohci_hcd 0000:00:09.0: irq 5, io mem 0xdffed000
[  126.729171] usb usb3: configuration #1 chosen from 1 choice
[  126.729272] hub 3-0:1.0: USB hub found
[  126.729298] hub 3-0:1.0: 3 ports detected
[  126.782919] usb 1-1: new low speed USB device using uhci_hcd and address 2
[  126.831591] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[  126.831608] PCI: setting IRQ 10 as level-triggered
[  126.831617] ACPI: PCI Interrupt 0000:00:09.1[b] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[  126.831651] ohci_hcd 0000:00:09.1: OHCI Host Controller
[  126.831736] ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 4
[  126.831773] ohci_hcd 0000:00:09.1: irq 10, io mem 0xdffee000
[  126.916983] usb usb4: configuration #1 chosen from 1 choice
[  126.917078] hub 4-0:1.0: USB hub found
[  126.917103] hub 4-0:1.0: 2 ports detected
[  126.973967] usb 1-1: configuration #1 chosen from 1 choice
[  127.020064] ACPI: PCI Interrupt 0000:00:09.2[C] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[  127.020103] ehci_hcd 0000:00:09.2: EHCI Host Controller
[  127.020185] ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 5
[  127.042908] ehci_hcd 0000:00:09.2: irq 9, io mem 0xdffeff00
[  127.042931] ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[  127.043220] usb usb5: configuration #1 chosen from 1 choice
[  127.043296] hub 5-0:1.0: USB hub found
[  127.043321] hub 5-0:1.0: 5 ports detected
[  127.147396] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[  127.147837] eth0: RealTek RTL8139 at 0xd884ce00, 00:40:f4:a6:7c:dc, IRQ 10
[  127.147845] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[  127.154013] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[  127.226790] usb 1-2: new low speed USB device using uhci_hcd and address 3
[  127.408767] usb 1-2: configuration #1 chosen from 1 choice
[  127.778641] usb 2-2: new full speed USB device using uhci_hcd and address 2
[  128.002120] usb 2-2: configuration #1 chosen from 1 choice
[  129.106175] usb 5-5: new high speed USB device using ehci_hcd and address 4
[  129.243828] usb 5-5: configuration #1 chosen from 1 choice
[  129.248093] usbcore: registered new interface driver hiddev
[  129.546067] usb 3-2: new full speed USB device using ohci_hcd and address 2
[  129.774878] usb 3-2: configuration #1 chosen from 1 choice
[  129.795575] input: A4Tech USB Optical Mouse as /class/input/input1
[  129.796309] input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:07.2-1
[  130.081880] usb 4-2: new full speed USB device using ohci_hcd and address 2
[  130.309600] usb 4-2: configuration #1 chosen from 1 choice
[  130.328650] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input2
[  130.328697] input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:07.2-2
[  130.348402] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input3
[  130.348446] input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:07.2-2
[  130.348509] usbcore: registered new interface driver usbhid
[  130.348520] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[  130.348971] usbcore: registered new interface driver libusual
[  130.362395] Initializing USB Mass Storage driver...
[  130.362768] scsi0 : SCSI emulation for USB Mass Storage devices
[  130.362889] usb-storage: device found at 4
[  130.362895] usb-storage: waiting for device to settle before scanning
[  130.362956] usbcore: registered new interface driver usb-storage
[  130.362964] USB Mass Storage support registered.
[  135.361181] usb-storage: device scan complete
[  135.396685] scsi 0:0:0:0: Direct-Access     WD       2500JB External  0107 PQ: 0 ANSI: 0
[  135.424276] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[  135.425236] sd 0:0:0:0: [sda] Write Protect is off
[  135.425252] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[  135.425260] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  135.426217] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[  135.427086] sd 0:0:0:0: [sda] Write Protect is off
[  135.427095] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[  135.427101] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  135.427113]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[  135.500325] sd 0:0:0:0: [sda] Attached SCSI disk
[  135.515045] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  306.917588] Attempting manual resume
[  306.917647] swsusp: Resume From Partition 3:5
[  306.917694] PM: Checking swsusp image.
[  306.939350] PM: Resume from disk failed.
[  306.987333] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[  306.987417] ReiserFS: hda1: using ordered data mode
[  306.991015] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[  306.994539] ReiserFS: hda1: checking transaction log (hda1)
[  321.440573] ReiserFS: hda1: replayed 957 transactions in 15 seconds
[  321.440975] ReiserFS: hda1: Using r5 hash to sort names
[  335.810720] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  335.821472] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  336.050412] Linux agpgart interface v0.102 (c) Dave Jones
[  336.267980] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[  336.292875] agpgart: AGP aperture is 256M @ 0xe0000000
[  336.318471] parport_pc: VIA 686A/8231 detected
[  336.318542] parport_pc: probing current configuration
[  336.318617] parport_pc: Current parallel port base: 0x378
[  336.318760] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[  336.413061] parport_pc: VIA parallel port: io=0x378, irq=7
[  337.399863] nvidia: module license 'NVIDIA' taints kernel.
[  337.747588] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[  337.747666] PCI: setting IRQ 11 as level-triggered
[  337.747726] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[  337.749287] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9639  Mon Apr 16 20:20:06 PDT 2007
[  338.102749] usbcore: registered new interface driver xpad
[  338.102826] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[  339.246297] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0
[  339.271577] Linux video capture interface: v2.00
[  339.295387] pwc: Philips webcam module version 10.0.13 loaded.
[  339.295462] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[  339.295537] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[  339.295612] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[  339.295821] pwc: Logitech QuickCam Pro 3000 USB webcam detected.
[  339.295993] pwc: Registered as /dev/video0.
[  339.601509] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
[  339.601685] usbcore: registered new interface driver Philips webcam
[  339.603041] usbcore: registered new interface driver usblp
[  339.603123] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[  340.228217] input: PC Speaker as /class/input/input4
[  340.470790] usbcore: registered new interface driver snd-usb-audio
[  341.500019] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[  341.500332] PCI: Setting latency timer of device 0000:00:07.5 to 64
[  513.566548] lp0: using parport0 (interrupt-driven).
[  513.746199] Adding 1124508k swap on /dev/hda5.  Priority:-1 extents:1 across:1124508k
[  529.668047] kjournald starting.  Commit interval 5 seconds
[  529.675197] EXT3 FS on hda6, internal journal
[  529.675211] EXT3-fs: mounted filesystem with ordered data mode.
[  529.695560] kjournald starting.  Commit interval 5 seconds
[  529.698360] EXT3 FS on hda7, internal journal
[  529.698374] EXT3-fs: mounted filesystem with ordered data mode.
[  529.739007] kjournald starting.  Commit interval 5 seconds
[  529.744375] EXT3 FS on hda8, internal journal
[  529.744395] EXT3-fs: mounted filesystem with ordered data mode.
[  533.907921] No dock devices found.
[  534.122948] input: Power Button (FF) as /class/input/input5
[  534.123787] ACPI: Power Button (FF) [PWRF]
[  534.170883] input: Power Button (CM) as /class/input/input6
[  534.171696] ACPI: Power Button (CM) [PWRB]
[  534.198878] input: Sleep Button (CM) as /class/input/input7
[  534.199706] ACPI: Sleep Button (CM) [SLPB]
[  535.055429] powernow: No powernow capabilities detected
[  538.077647] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  538.980036] ppdev: user-space parallel port driver
[  540.250910] audit(1192955501.666:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=10319 profile="/usr/sbin/cupsd"
[  540.793718] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[  540.793733] apm: overridden by ACPI.
[  541.169981] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[  541.170400] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[  541.170802] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[  543.122914] Failure registering capabilities with primary security module.
[  550.123573] NET: Registered protocol family 17
[  551.280024] NET: Registered protocol family 10
[  551.280539] lo: Disabled Privacy Extensions
[  562.073930] eth0: no IPv6 routers present
[  959.073560] kjournald starting.  Commit interval 5 seconds
[  959.074870] EXT3 FS on sda1, internal journal
[  959.074887] EXT3-fs: recovery complete.
[  959.076506] EXT3-fs: mounted filesystem with ordered data mode.
[  959.399981] kjournald starting.  Commit interval 5 seconds
[  959.405046] EXT3 FS on sda8, internal journal
[  959.405065] EXT3-fs: recovery complete.
[  959.412256] EXT3-fs: mounted filesystem with ordered data mode.
[  959.873366] kjournald starting.  Commit interval 5 seconds
[  959.874899] EXT3 FS on sda9, internal journal
[  959.874918] EXT3-fs: recovery complete.
[  959.878472] EXT3-fs: mounted filesystem with ordered data mode.
[  960.013501] kjournald starting.  Commit interval 5 seconds
[  960.014807] EXT3 FS on sda6, internal journal
[  960.014821] EXT3-fs: recovery complete.
[  960.016356] EXT3-fs: mounted filesystem with ordered data mode.
[  960.119717] kjournald starting.  Commit interval 5 seconds
[  960.121136] EXT3 FS on sda7, internal journal
[  960.121408] EXT3-fs: mounted filesystem with ordered data mode.
[  960.299997] kjournald starting.  Commit interval 5 seconds
[  960.301300] EXT3 FS on sda5, internal journal
[  960.301312] EXT3-fs: recovery complete.
[  960.302670] EXT3-fs: mounted filesystem with ordered data mode.
[23424.959619] init_special_inode: bogus i_mode (60)
[23424.959647] ReiserFS: hda1: warning: vs-13075: reiserfs_read_locked_inode: dead inode read from disk [131554 131733 0x0 SD]. This is likely to be race with knfsd. Ignore
[23424.961143] init_special_inode: bogus i_mode (60)
[23424.961216] ReiserFS: hda1: warning: vs-13075: reiserfs_read_locked_inode: dead inode read from disk [131554 131733 0x0 SD]. This is likely to be race with knfsd. Ignore

Dernière modification par cflam69 (Le 31/10/2007, à 23:38)

---

La liberté ne s'use que si l'on ne s'en sert pas.

cflam69

Re : [Résolu] Gutsy a perdu mon DD slave ?!

Is there anybody out there?

---

La liberté ne s'use que si l'on ne s'en sert pas.

cflam69

Re : [Résolu] Gutsy a perdu mon DD slave ?!

Pas un(e) geek pour m'aider ?
Trop dur ou trop nul comme problème ?

---

La liberté ne s'use que si l'on ne s'en sert pas.

cflam69

Re : [Résolu] Gutsy a perdu mon DD slave ?!

Bon ben voilà, résolu ... tout seul
Tout est reconnu, mon DD slave comme les CDRom.

J'suis content... mais triste d'avoir dû le faire seul.

---

La liberté ne s'use que si l'on ne s'en sert pas.