#1 Le 24/10/2007, à 20:03
- vega_dagraeyt-wuon
Comment configurer clavier externe pour portable sous feisty ?
Bonsoir à tous. En ce moment j'ai de gros problèmes avec mon ordi qui s'éteint tout seul. Je dois pour le maintenir allumé mettre une pile de livres sur le clavier et le repose-main 
car sinon il y a un faux contact qui se déclenche. je ne peux donc pas utiliser le clavier de mon portable. Cependant j'ai un vieux clavier ps/2 de pc de bureau chez moi que j'ai branché à mon portable via un adaptateur ps/2-usb ( je ne peux pas emboîter la prise ps/2 de ce clavier dans l'entrée ps/2 de mon ordi qui est légèrement différente). Mais voilà ça ne marche pas j'ai un msg hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? qui s'affiche au démarrage de la machine qui ne semble pas reconnaître le clavier. Ce clavier n'est pas de marque ce qu'il y a de plus basique. Mais j'en ai vraiment besoin là car un pc sans clavier c'est comme....:rolleyes: bref ! voici mon dmesg:
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 19:50:39 UTC 2007 (Ubuntu 2.6.20-16.32-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000bef0000 end: 000000000bff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000bff0000 size: 000000000000ffc0 end: 000000000bffffc0 type: 3
[ 0.000000] copy_e820_map() start: 000000000bffffc0 size: 0000000000000040 end: 000000000c000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
[ 0.000000] BIOS-e820: 000000000bff0000 - 000000000bffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000000bffffc0 - 000000000c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 191MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 49136) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 49136
[ 0.000000] HighMem 49136 -> 49136
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 49136
[ 0.000000] On node 0 totalpages: 49136
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 351 pages used for memmap
[ 0.000000] Normal zone: 44689 pages, LIFO batch:7
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
[ 0.000000] ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x0bffb0eb
[ 0.000000] ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x0bfffa90
[ 0.000000] ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x0bfffb20
[ 0.000000] ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x0bfffb90
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x0bffb11f
[ 0.000000] ACPI: DSDT (v001 TOSINV Avani2 0x00001004 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000)
[ 0.000000] Detected 3066.933 MHz processor.
[ 23.593630] Built 1 zonelists. Total pages: 48753
[ 23.593637] Kernel command line: root=UUID=c30c8f08-376c-46a7-afbc-c7c022dad60e ro quiet splash noapic
[ 23.593808] Found and enabled local APIC!
[ 23.593812] mapped APIC to ffffd000 (fee00000)
[ 23.593816] Enabling fast FPU save and restore... done.
[ 23.593821] Enabling unmasked SIMD FPU exception support... done.
[ 23.593839] Initializing CPU#0
[ 23.593942] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 23.595335] Console: colour VGA+ 80x25
[ 23.595622] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 23.595815] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 23.600735] Memory: 183764k/196544k available (1993k kernel code, 12240k reserved, 900k data, 328k init, 0k highmem)
[ 23.600748] virtual kernel memory layout:
[ 23.600749] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 23.600750] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 23.600751] vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB)
[ 23.600752] lowmem : 0xc0000000 - 0xcbff0000 ( 191 MB)
[ 23.600753] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 23.600754] .data : 0xc02f2429 - 0xc03d36d4 ( 900 kB)
[ 23.600756] .text : 0xc0100000 - 0xc02f2429 (1993 kB)
[ 23.600759] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 23.677723] Calibrating delay using timer specific routine.. 6136.81 BogoMIPS (lpj=12273626)
[ 23.677768] Security Framework v1.0.0 initialized
[ 23.677776] SELinux: Disabled at boot.
[ 23.677795] Mount-cache hash table entries: 512
[ 23.677956] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[ 23.677965] monitor/mwait feature present.
[ 23.677967] using mwait in idle threads.
[ 23.677975] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 23.677977] CPU: L2 cache: 1024K
[ 23.677980] CPU: Physical Processor ID: 0
[ 23.677982] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000459d 00000000 00000000
[ 23.677995] Compat vDSO mapped to ffffe000.
[ 23.678001] Remapping vsyscall page to ffffe000
[ 23.678018] Checking 'hlt' instruction... OK.
[ 23.693786] SMP alternatives: switching to UP code
[ 23.694225] Early unpacking initramfs... done
[ 23.962028] ACPI: Core revision 20060707
[ 23.962148] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 23.963845] ACPI: setting ELCR to 0200 (from 0c20)
[ 24.004368] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01
[ 24.004409] SMP alternatives: switching to SMP code
[ 24.004644] Booting processor 1/1 eip 3000
[ 24.015090] Initializing CPU#1
[ 24.092623] Calibrating delay using timer specific routine.. 6134.03 BogoMIPS (lpj=12268074)
[ 24.092635] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[ 24.092642] monitor/mwait feature present.
[ 24.092651] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 24.092653] CPU: L2 cache: 1024K
[ 24.092656] CPU: Physical Processor ID: 0
[ 24.092659] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000459d 00000000 00000000
[ 24.093041] CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01
[ 24.093086] Total of 2 processors activated (12270.85 BogoMIPS).
[ 24.200354] checking TSC synchronization across 2 CPUs: passed.
[ 0.003987] Brought up 2 CPUs
[ 0.068209] migration_cost=23
[ 0.068553] Booting paravirtualized kernel on bare hardware
[ 0.068631] Time: 10:38:51 Date: 09/24/107
[ 0.068670] NET: Registered protocol family 16
[ 0.068784] EISA bus registered
[ 0.068791] ACPI: bus type pci registered
[ 0.068822] PCI: PCI BIOS revision 2.10 entry at 0xe9964, last bus=2
[ 0.068824] PCI: Using configuration type 1
[ 0.068826] Setting up standard PCI resources
[ 0.081173] ACPI: Interpreter enabled
[ 0.081176] ACPI: Using PIC for interrupt routing
[ 0.081974] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.081981] PCI: Probing PCI hardware (bus 00)
[ 0.082105] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.082841] Boot video device is 0000:01:05.0
[ 0.083083] PCI: Transparent bridge - 0000:00:14.4
[ 0.083148] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[ 0.083150] Please report the result to linux-kernel to fix this permanently
[ 0.083170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.085422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.086348] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 7 10 *11)
[ 0.086601] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11)
[ 0.086851] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11)
[ 0.087102] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 10 11)
[ 1.106067] ACPI: Power Resource [PUT2] (on)
[ 1.106128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 1.106748] ACPI: Power Resource [PFA1] (off)
[ 1.106876] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.106895] pnp: PnP ACPI init
[ 1.115536] pnp: PnP ACPI: found 11 devices
[ 1.115541] PnPBIOS: Disabled by ACPI PNP
[ 1.115603] PCI: Using ACPI for IRQ routing
[ 1.115607] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 1.117559] NET: Registered protocol family 8
[ 1.117562] NET: Registered protocol family 20
[ 1.117803] pnp: 00:07: ioport range 0x200-0x20f has been reserved
[ 1.117806] pnp: 00:07: ioport range 0x280-0x29f has been reserved
[ 1.117809] pnp: 00:07: ioport range 0x40b-0x40b has been reserved
[ 1.118182] PCI: Bridge: 0000:00:01.0
[ 1.118186] IO window: c000-dfff
[ 1.118190] MEM window: e0000000-efffffff
[ 1.118193] PREFETCH window: a0000000-afffffff
[ 1.118203] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 1.118205] IO window: 0000a400-0000a4ff
[ 1.118209] IO window: 0000a800-0000a8ff
[ 1.118214] PREFETCH window: 90000000-93ffffff
[ 1.118218] MEM window: d4000000-d7ffffff
[ 1.118222] PCI: Bridge: 0000:00:14.4
[ 1.118225] IO window: a000-bfff
[ 1.118230] MEM window: d0000000-dfffffff
[ 1.118233] PREFETCH window: 90000000-9fffffff
[ 1.118425] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
[ 1.118428] PCI: setting IRQ 5 as level-triggered
[ 1.118430] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
[ 1.118479] NET: Registered protocol family 2
[ 1.168979] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.169079] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.169144] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.169181] TCP: Hash tables configured (established 8192 bind 4096)
[ 1.169184] TCP reno registered
[ 1.184980] checking if image is initramfs... it is
[ 1.720674] Freeing initrd memory: 6771k freed
[ 1.721006] Simple Boot Flag at 0x37 set to 0x1
[ 1.721532] audit: initializing netlink socket (disabled)
[ 1.721558] audit(1193222333.372:1): initialized
[ 1.721794] VFS: Disk quotas dquot_6.5.1
[ 1.721818] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.721891] io scheduler noop registered
[ 1.721895] io scheduler anticipatory registered
[ 1.721897] io scheduler deadline registered
[ 1.721910] io scheduler cfq registered (default)
[ 1.722218] isapnp: Scanning for PnP cards...
[ 2.072961] isapnp: No Plug & Play device found
[ 2.101448] Real Time Clock Driver v1.12ac
[ 2.101522] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.101800] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 2.102577] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
[ 2.102581] PCI: setting IRQ 10 as level-triggered
[ 2.102584] ACPI: PCI Interrupt 0000:00:14.6[b] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
[ 2.102595] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 2.102803] mice: PS/2 mouse device common for all mice
[ 2.103508] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 2.103700] input: Macintosh mouse button emulation as /class/input/input0
[ 2.103753] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 2.103758] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.103965] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.107185] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.107192] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.107326] EISA: Probing bus 0 at eisa.0
[ 2.107345] Cannot allocate resource for EISA slot 4
[ 2.107356] Cannot allocate resource for EISA slot 8
[ 2.107358] EISA: Detected 0 cards.
[ 2.137396] TCP cubic registered
[ 2.137407] NET: Registered protocol family 1
[ 2.137502] input: AT Translated Set 2 keyboard as /class/input/input1
[ 2.137568] Testing NMI watchdog ... OK.
[ 2.177160] Starting balanced_irq
[ 2.177172] Using IPI No-Shortcut mode
[ 2.177252] ACPI: (supports S0 S3 S4 S5)
[ 2.177315] Magic number: 11:468:629
[ 2.178104] Freeing unused kernel memory: 328k freed
[ 2.178214] Time: tsc clocksource has been installed.
[ 3.477136] Capability LSM initialized
[ 3.511974] ACPI: Transitioning device [FAN1] to D3
[ 3.511978] ACPI: Transitioning device [FAN1] to D3
[ 3.511982] ACPI: Fan [FAN1] (off)
[ 3.515960] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 3.516113] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 3.516478] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 3.516618] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 3.686421] ACPI: Thermal Zone [THZN] (56 C)
[ 4.187861] usbcore: registered new interface driver usbfs
[ 4.187901] usbcore: registered new interface driver hub
[ 4.187938] usbcore: registered new device driver usb
[ 4.189559] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.189645] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
[ 4.189677] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.189920] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 4.189954] ohci_hcd 0000:00:13.0: irq 5, io mem 0xf0001000
[ 4.227217] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.314435] SCSI subsystem initialized
[ 4.328646] usb usb1: configuration #1 chosen from 1 choice
[ 4.328692] hub 1-0:1.0: USB hub found
[ 4.328707] hub 1-0:1.0: 3 ports detected
[ 4.377065] libata version 2.20 loaded.
[ 4.377182] ieee1394: Initialized config rom entry `ip1394'
[ 4.436392] PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
[ 4.436405] ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
[ 4.436434] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.436480] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.436546] ehci_hcd 0000:00:13.2: irq 5, io mem 0x10000000
[ 4.436555] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.436691] usb usb2: configuration #1 chosen from 1 choice
[ 4.436736] hub 2-0:1.0: USB hub found
[ 4.436756] hub 2-0:1.0: 6 ports detected
[ 4.544271] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
[ 4.594129] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[d0000000-d00007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.594270] 8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 4.594275] 8139cp 0000:02:07.0: Try the "8139too" driver instead.
[ 4.596834] ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
[ 4.596879] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.596979] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 4.597009] ohci_hcd 0000:00:13.1: irq 5, io mem 0xf0002000
[ 4.598712] 8139too Fast Ethernet driver 0.9.28
[ 4.659744] usb usb3: configuration #1 chosen from 1 choice
[ 4.659790] hub 3-0:1.0: USB hub found
[ 4.659807] hub 3-0:1.0: 3 ports detected
[ 4.767927] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 4.768325] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
[ 4.768334] PCI: setting IRQ 11 as level-triggered
[ 4.768340] ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11
[ 4.768362] ATIIXP: chipset revision 0
[ 4.768368] ATIIXP: not 100% native mode: will probe irqs later
[ 4.768381] ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
[ 4.768409] ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
[ 4.768424] Probing IDE interface ide0...
[ 5.058700] hda: FUJITSU MHT2040AT, ATA DISK drive
[ 5.734157] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.804305] Probing IDE interface ide1...
[ 5.868571] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1b7e289]
[ 6.542747] hdc: MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive
[ 6.882013] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.884505] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 6.884511] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 6.885038] eth0: RealTek RTL8139 at 0xcc94e000, 00:a0:d1:b7:e2:89, IRQ 11
[ 6.885043] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.894887] hda: max request size: 128KiB
[ 6.895105] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[ 6.897089] hda: cache flushes supported
[ 6.897176] hda: hda1 hda2 hda3 < hda5 hda6 >
[ 6.989517] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 6.989531] Uniform CD-ROM driver Revision: 3.20
[ 7.365462] Attempting manual resume
[ 7.365467] swsusp: Resume From Partition 3:2
[ 7.365469] PM: Checking swsusp image.
[ 7.365764] PM: Resume from disk failed.
[ 7.380723] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.380730] EXT3-fs: write access will be enabled during recovery.
[ 8.509344] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 8.819314] kjournald starting. Commit interval 5 seconds
[ 8.819334] EXT3-fs: recovery complete.
[ 8.820102] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.788619] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 15.067891] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 18.347172] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 18.650387] usb 1-3: new low speed USB device using ohci_hcd and address 6
[ 18.844694] usb 1-3: config 1 has an invalid interface number: 1 but max is 0
[ 18.844702] usb 1-3: config 1 has no interface number 0
[ 18.849812] usb 1-3: configuration #1 chosen from 1 choice
[ 22.680147] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 22.935478] NET: Registered protocol family 10
[ 22.935632] lo: Disabled Privacy Extensions
[ 24.818262] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.918933] input: PC Speaker as /class/input/input2
[ 24.934632] agpgart: Detected Ati IGP7000/M chipset
[ 24.948113] agpgart: AGP aperture is 64M @ 0xb0000000
[ 24.954184] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 24.963682] Yenta: CardBus bridge found at 0000:02:06.0 [1179:ff10]
[ 24.963710] Yenta: Enabling burst memory read transactions
[ 24.963717] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 24.963719] Yenta: Routing CardBus interrupts to PCI
[ 24.963726] Yenta TI: socket 0000:02:06.0, mfunc 0x01111122, devctl 0x64
[ 25.017009] irda_init()
[ 25.017040] NET: Registered protocol family 23
[ 25.175873] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.197513] Yenta: ISA IRQ mask 0x00d8, PCI irq 5
[ 25.197519] Socket status: 30000006
[ 25.197523] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 25.197530] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
[ 25.197534] cs: IO port probe 0xa000-0xbfff: clean.
[ 25.198036] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xdfffffff
[ 25.198039] pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff
[ 25.199583] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.262892] parport: PnPBIOS parport detected.
[ 25.262937] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 25.478018] usbcore: registered new interface driver hiddev
[ 25.582129] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
[ 25.582142] synaptics: Toshiba Satellite A60 detected, limiting rate to 40pps.
[ 25.616985] input: PS/2+USB Mouse as /class/input/input3
[ 25.617072] input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:13.0-3
[ 25.632678] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 25.655697] cs: IO port probe 0x100-0x3af: excluding 0x220-0x227 0x300-0x307 0x310-0x317
[ 25.656802] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 25.657288] cs: IO port probe 0x820-0x8ff: clean.
[ 25.657710] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[ 25.658258] cs: IO port probe 0xa00-0xaff: clean.
[ 25.910606] ACPI: PCI Interrupt 0000:00:14.6[b] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
[ 25.919031] atiixp-modem: codec reset timeout
[ 25.935835] ACPI: PCI Interrupt 0000:00:14.5[b] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
[ 28.839232] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 32.118504] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 32.936322] eth0: no IPv6 routers present
[ 35.397776] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 38.677047] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 38.677094] usbcore: registered new interface driver usbhid
[ 38.677100] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 38.893463] fuse init (API version 7.8)
[ 38.917979] lp0: using parport0 (interrupt-driven).
[ 38.968892] Adding 562264k swap on /dev/disk/by-uuid/ff4ec6cd-c259-4ab9-a1ef-e5695da59be2. Priority:-1 extents:1 across:562264k
[ 39.249379] EXT3 FS on hda1, internal journal
[ 41.068025] NET: Registered protocol family 17
[ 46.152660] Using specific hotkey driver
[ 46.288515] ibm_acpi: ec object not found
[ 46.372733] ACPI: Battery Slot [BAT1] (battery absent)
[ 46.399208] No dock devices found.
[ 46.421603] input: Power Button (FF) as /class/input/input5
[ 46.421648] ACPI: Power Button (FF) [PWRF]
[ 46.421705] input: Lid Switch as /class/input/input6
[ 46.421736] ACPI: Lid Switch [LID]
[ 46.421797] input: Power Button (CM) as /class/input/input7
[ 46.421834] ACPI: Power Button (CM) [PWRB]
[ 46.540293] ACPI: AC Adapter [AC] (on-line)
[ 46.621136] pcc_acpi: loading...
[ 51.726382] [drm] Initialized drm 1.1.0 20060810
[ 51.736818] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11
[ 51.737446] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 52.412934] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 52.412942] apm: disabled - APM is not SMP safe.
[ 52.565420] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 52.565437] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 52.565458] agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
[ 53.103594] [drm] Setting GART location based on new memory map
[ 53.103654] [drm] writeback test succeeded in 1 usecsje me rends compte qu'ubuntu est dépourvu d'assistant d'installation de périphériques en gros c'est du hit or miss. bon c'est vrai aussi qu'il y a pas de drivers mais pourtant ma souris optique donc usb marche parfaitement en hotplug. Qqun a -til une idée sur ce que je peux essayer de faire ? J'ai déjà essayé un
dpkg-reconfigure xserver-xorgsans succès...:/
Hors ligne
#2 Le 24/10/2007, à 21:08
- Jashugatts
Re : Comment configurer clavier externe pour portable sous feisty ?
une question simple a tu testé avec un autre adaptateur ? parce que j'utilise une config similaire a mon travail et j'ai pas de problème.
Inventer, c'est penser à côté.
La connaissance s'acquiert par l'expérience, tout le reste n'est que de l'information
[Albert Einstein]
Hors ligne
#3 Le 24/10/2007, à 22:04
- vega_dagraeyt-wuon
Re : Comment configurer clavier externe pour portable sous feisty ?
Jashugatts a écrit :
une question simple a tu testé avec un autre adaptateur ? parce que j'utilise une config similaire a mon travail et j'ai pas de problème.
non j'en ai pas d'autre 
Hors ligne