Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

#1 Le 24/05/2014, à 08:30

nam1962

Erreurs au démarrage - utopic

Mon démarrage le donne parfois depuis une clean install hier "une erreur est survenue lors du montage de /"
Un second démarrage le fait ensuite.

:~$ cat -n /etc/fstab 
     1	# /etc/fstab: static file system information.
     2	#
     3	# Use 'blkid' to print the universally unique identifier for a
     4	# device; this may be used with UUID= as a more robust way to name devices
     5	# that works even if disks are added and removed. See fstab(5).
     6	#
     7	# <file system> <mount point>   <type>  <options>       <dump>  <pass>
     8	# / was on /dev/sda2 during installation
     9	UUID=89fcc7d2-d3e1-4a80-a51a-109b4e085153 /               ext4    errors=remount-ro 0       1
    10	# /boot/efi was on /dev/sda1 during installation
    11	#UUID=98EE-FCCB  /boot/efi       vfat    defaults        0       1
    12	# /home was on /dev/sda4 during installation
    13	UUID=50ccbf93-2ee8-4a35-922e-c477c206f330 /home           ext4    defaults        0       2
    14	# swap was on /dev/sda3 during installation
    15	UUID=a1221f12-2f4d-4cae-b33c-56cb696895ce none            swap    sw              0       0
    16	UUID=98EE-FCCB	/boot/efi	vfat	defaults	0	1
:~$ sudo blkid
/dev/sda1: UUID="98EE-FCCB" TYPE="vfat" 
/dev/sda2: UUID="89fcc7d2-d3e1-4a80-a51a-109b4e085153" TYPE="ext4" 
/dev/sda3: UUID="a1221f12-2f4d-4cae-b33c-56cb696895ce" TYPE="swap" 
/dev/sda4: UUID="50ccbf93-2ee8-4a35-922e-c477c206f330" TYPE="ext4" 

Si une bonne âme a des idées là-dessus...


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#2 Le 24/05/2014, à 09:40

moko138

Re : Erreurs au démarrage - utopic

1) Voilà ce qui arrive quand on installe Untrusty Uniform.  lol

2) Le "parfois" me rappelle un autre de tes problèmes. Je continue de ne pas écarter la piste d'un disque détérioré.

3) As-tu essayé |grep sda   appliqué à dmesg et à cat /var/log/syslog ?

Dernière modification par moko138 (Le 24/05/2014, à 09:43)

Hors ligne

#3 Le 24/05/2014, à 10:17

nam1962

Re : Erreurs au démarrage - utopic

Tu vas m'aider à les lire alors tongue

:~$ cat /var/log/syslog | grep sda
May 24 09:50:41 localhost smartd[1770]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 77 to 64
May 24 10:20:41 localhost smartd[1770]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 64 to 59
May 24 10:21:54 localhost kernel: [    4.622069] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
May 24 10:21:54 localhost kernel: [    4.622072] sd 0:0:0:0: [sda] 4096-byte physical blocks
May 24 10:21:54 localhost kernel: [    4.622137] sd 0:0:0:0: [sda] Write Protect is off
May 24 10:21:54 localhost kernel: [    4.622142] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 24 10:21:54 localhost kernel: [    4.622168] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 24 10:21:54 localhost kernel: [    4.663276]  sda: sda1 sda2 sda3 sda4
May 24 10:21:54 localhost kernel: [    4.663826] sd 0:0:0:0: [sda] Attached SCSI disk
May 24 10:21:54 localhost kernel: [    5.429438] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
May 24 10:21:54 localhost kernel: [   14.772198] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
May 24 10:21:54 localhost kernel: [   16.130980] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
May 24 10:21:54 localhost kernel: [   16.959908] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
May 24 10:26:21 localhost kernel: [    4.810623] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
May 24 10:26:21 localhost kernel: [    4.812464] sd 0:0:0:0: [sda] 4096-byte physical blocks
May 24 10:26:21 localhost kernel: [    4.813566] sd 0:0:0:0: [sda] Write Protect is off
May 24 10:26:21 localhost kernel: [    4.814457] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 24 10:26:21 localhost kernel: [    4.814476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 24 10:26:21 localhost kernel: [    4.876874]  sda: sda1 sda2 sda3 sda4
May 24 10:26:21 localhost kernel: [    4.878229] sd 0:0:0:0: [sda] Attached SCSI disk
May 24 10:26:21 localhost kernel: [    5.487331] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
May 24 10:26:21 localhost kernel: [   27.012885] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
May 24 10:26:21 localhost kernel: [   27.187699] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
May 24 10:26:21 localhost kernel: [   28.012143] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
May 24 10:26:24 localhost smartd[1769]: Device: /dev/sda, type changed from 'scsi' to 'sat'
May 24 10:26:24 localhost smartd[1769]: Device: /dev/sda [SAT], opened
May 24 10:26:24 localhost smartd[1769]: Device: /dev/sda [SAT], Hitachi HTS547575A9E384, S/N:J2190020DR169D, WWN:5-000cca-728d81c2f, FW:JE4OA50A, 750 GB
May 24 10:26:24 localhost smartd[1769]: Device: /dev/sda [SAT], found in smartd database: Hitachi/HGST Travelstar 5K750
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.Hitachi_HTS547575A9E384-J2190020DR169D.ata.state
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 1 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 2 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 3 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 4 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 5 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 7 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 8 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 9 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 10 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 12 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 183 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 184 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 187 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 188 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 190 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 191 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 192 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 193 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 196 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 197 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 198 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 199 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 223 = 0
May 24 10:26:26 localhost smartd[1769]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.Hitachi_HTS547575A9E384-J2190020DR169D.ata.state
May 24 10:29:12 localhost kernel: [    4.158000] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
May 24 10:29:12 localhost kernel: [    4.158004] sd 0:0:0:0: [sda] 4096-byte physical blocks
May 24 10:29:12 localhost kernel: [    4.158076] sd 0:0:0:0: [sda] Write Protect is off
May 24 10:29:12 localhost kernel: [    4.158080] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 24 10:29:12 localhost kernel: [    4.158125] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 24 10:29:12 localhost kernel: [    4.196147]  sda: sda1 sda2 sda3 sda4
May 24 10:29:12 localhost kernel: [    4.196567] sd 0:0:0:0: [sda] Attached SCSI disk
May 24 10:29:12 localhost kernel: [    4.917835] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
May 24 10:29:12 localhost kernel: [   14.338422] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
May 24 10:29:12 localhost kernel: [   15.673139] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
May 24 10:29:12 localhost kernel: [   16.532630] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
May 24 10:32:20 localhost kernel: [    4.824250] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
May 24 10:32:20 localhost kernel: [    4.827046] sd 0:0:0:0: [sda] 4096-byte physical blocks
May 24 10:32:20 localhost kernel: [    4.828005] sd 0:0:0:0: [sda] Write Protect is off
May 24 10:32:20 localhost kernel: [    4.828920] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 24 10:32:20 localhost kernel: [    4.828942] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 24 10:32:20 localhost kernel: [    4.887600]  sda: sda1 sda2 sda3 sda4
May 24 10:32:20 localhost kernel: [    4.888927] sd 0:0:0:0: [sda] Attached SCSI disk
May 24 10:32:20 localhost kernel: [    5.499549] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
May 24 10:32:20 localhost kernel: [   28.015210] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
May 24 10:32:20 localhost kernel: [   28.035524] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
May 24 10:32:20 localhost kernel: [   28.675409] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
May 24 10:32:24 localhost smartd[1773]: Device: /dev/sda, type changed from 'scsi' to 'sat'
May 24 10:32:24 localhost smartd[1773]: Device: /dev/sda [SAT], opened
May 24 10:32:24 localhost smartd[1773]: Device: /dev/sda [SAT], Hitachi HTS547575A9E384, S/N:J2190020DR169D, WWN:5-000cca-728d81c2f, FW:JE4OA50A, 750 GB
May 24 10:32:24 localhost smartd[1773]: Device: /dev/sda [SAT], found in smartd database: Hitachi/HGST Travelstar 5K750
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.Hitachi_HTS547575A9E384-J2190020DR169D.ata.state
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 1 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 2 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 3 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 4 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 5 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 7 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 8 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 9 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 10 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 12 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 183 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 184 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 187 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 188 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 190 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 191 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 192 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 193 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 196 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 197 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 198 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 199 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], same Attribute has different ID numbers: 223 = 0
May 24 10:32:26 localhost smartd[1773]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.Hitachi_HTS547575A9E384-J2190020DR169D.ata.state
May 24 11:02:26 localhost smartd[1789]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 61 to 59
:~$ dmesg | grep sda
[    4.824250] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    4.827046] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.828005] sd 0:0:0:0: [sda] Write Protect is off
[    4.828920] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.828942] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.887600]  sda: sda1 sda2 sda3 sda4
[    4.888927] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.499549] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   28.015210] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
[   28.035524] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   28.675409] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)

[edit] j'ai même repassé l'utilitaire interne de HP pour le HDD : pas d'erreurs, disque sain.

Dernière modification par nam1962 (Le 24/05/2014, à 11:23)


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#4 Le 24/05/2014, à 15:14

moko138

Re : Erreurs au démarrage - utopic

A) C'est pas beau de tirer la langue !

B) Cherchons "doesn't support DPO or FUA" site:ubuntu-fr.org

1) ACPI soupçonné. Résolu par rétrogradation à Feisty.  bluelambda
2) ntfs corrompu. Résolu par chkdsk /f  sdblepas
3) disque moribond
4) Deux HD sur une CM, pb de débit. "eSata Probleme de debit"
5) Deux HD sur une CM. "resolu]disque de 200 giga en ntfs ne se monte pas" [Même utilisateur que 4)]
6) iSCSI (Internet Small Computer System Interface) : protocole serveur. Reformatage par fdisk. (Doc')
7)  "problème de son sous ubuntu 13" ==> ?

============

C) Cherchons  résolu \"doesn\'t support DPO or FUA\" site:ubuntu-fr.org
#  User   
1r) sdblepas (identique 2) ci-dessus)
2r)  bluelambda (identique 1) ci-dessus) : "Là j'ai réactivé l'ACPI et le portable ne démarre plus, écran noir peut après avoir choisi Ubuntu dans Grub."
3r)                         ->  Lecteur CD mort
4r) NoZ   "Resolu de force] Mauvais debit des disques SATA II"-> Réinstall
5r)                          -> = 3r)
6r)  mako    "Résolu] Installation de disque dur externe neuf"  ->  (en fait, pas de pb)
7r) Kadie   "Résolu] Disque dur HS ?" -> résolu par changement de nappe.

===============

  En conclusion, il y a un cas où tout va bien malgré "doesn't support DPO or FUA", et dans les autres cas le pb est soit tout matériel, soit un pb mixte, matériel-logiciel, portant sur la gestion de l'ACPI.

Hors ligne

#5 Le 24/05/2014, à 15:25

nam1962

Re : Erreurs au démarrage - utopic

Merci de la quête.
L'ordi a fonctionné normalement (sans jamais pouvoir activer la radeon, jusque 3 semaines avant la release de la 14.04.
Tous les tests du HDD passent.
ACPI=off me blique plein de trucs dont le wifi.

groumpf


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#6 Le 25/05/2014, à 05:15

moko138

Re : Erreurs au démarrage - utopic

PS : je suis un autre cas de 14.04 avec un "doesn't support DPO or FUA" mais sans problème d'affichage : cette mention n'est peut-être aucunement corrélée à ton problème, contrairement à ce que j'avais supposé.

Hors ligne

#7 Le 25/05/2014, à 08:19

nam1962

Re : Erreurs au démarrage - utopic

Là le nouveau symptôme c'est vraiment ce non montage de / et /home puis soudain tout est ok (et là l'ordi fonctionne parfaitement, est véloce et tout...)


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

#8 Le 28/05/2014, à 22:32

moko138

Re : Erreurs au démarrage - utopic

nam1962 a écrit :

Là le nouveau symptôme soudain tout est ok (et là l'ordi fonctionne parfaitement, est véloce et tout...)

  Quand tout marche vite et bien, tu t'étonnes :
soit tu as démarré windows, lol
soit tu n'as pas fini de te désintoxiquer de l'esprit windows. sad

Dernière modification par moko138 (Le 28/05/2014, à 22:33)

Hors ligne

#9 Le 29/05/2014, à 07:53

nam1962

Re : Erreurs au démarrage - utopic

Quand tu es sur W$, même si ca démarre, c'est lent tongue


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.04 & 14.10. Et vous ?
51 convertis IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, la nouvelle élégance du T-shirt  ...bio en plus : http://goudronblanc.com

Hors ligne

Haut de page ↑