#1 Le 11/06/2014, à 03:35
- Pascal777ok
Configuration d'une carte ISA sur ancien système avec carte Boltek
Bonjour à tous!
J'ai un problème assez complexe. J'ai installé récemment Xubuntu 12.04 sur un ancien PC qui possède encore une fente ISA pour ma carte de détection de foudre de marque Boltek. J'utilise le logiciel Nexstorm qui est fait pour Windows normalement. Tout fonctionne sur le vieux Windows XP mais sur Xubuntu j'ai essayé de l'installer avec Wine et aussi avec le programme PlayonLinux mais malheureusement le logiciel Nexstorm ne réussit pas à voir la carte ISA et dit "I/O drivers not detected" et demande d'installer les drivers pour pouvoir "voir" la carte. Dans les paramètres de Nexstorm la carte est sous l'adresse HEX 0360 qui fonctionne bien sous Windows. Comment pourrais-je bien configurer Xubuntu afin de faire fonctionner cette carte à nouveau? Elle est reliée à une antenne pour détection de foudre (sur plus de 300 KM à la ronde) sur mon toit et le problème est que la carte version PCI à elle seule vaut plus de $340 pour faire la mise à jour! (Raison pour laquelle je fais tout mon possible pour la faire fonctionner sous Xubuntu sur cet ancien ordi). Sur d'autres ordinateurs j'utilise Ubuntu que j'aime bien mais ces ordinateurs n'ont pas de fentes ISA vu qu'ils sont plus récents.
La compagnie Boltek (Boltek.com) semble avoir fait développer pour Linux un driver mais seulement pour la carte PCI, rien pour la carte ISA. Mais probablement que l'un d'entre vous est assez avancé en Linux pour trouver une solution.
Merci d'avance et bonne semaine à tous!
Pascal
Hors ligne
#2 Le 11/06/2014, à 04:04
- moko138
Re : Configuration d'une carte ISA sur ancien système avec carte Boltek
Donne, s'il te plaît, avec Xubuntu 12.04 et carte isa en place, les retours complets de
sudo lshwEt de
dmesgmais juste après démarrage.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 11/06/2014, à 04:41
- Pascal777ok
Re : Configuration d'une carte ISA sur ancien système avec carte Boltek
Bonjour moko138 merci de ta réponse si rapide 
Voici l'info:
sudo lshw:
pascal@pascal-desktop:~$ sudo lshw
[sudo] password for pascal:
pascal-desktop
description: Ordinateur de Bureau
version: 00000000
bits: 32 bits
fonctionnalités: smbios-2.3 dmi-2.3 smp-1.1 smp
configuration: chassis=desktop cpus=1
*-core
description: Carte mère
produit: 6VTXE / 6VTXE-A
fabriquant: Gigabyte Technology Co., Ltd.
identifiant matériel: 0
version: 1.x
numéro de série: 00000000
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: 6.27.10
date: 05/03/2002
taille: 64KiB
capacité: 192KiB
fonctionnalités: acpi usb agp ls120boot zipboot biosbootspecification
*-cpu
description: CPU
produit: Intel(R) Pentium(R) III CPU 1133MHz
fabriquant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: 6.11.1
emplacement: Socket370
taille: 1133MHz
capacité: 2400MHz
bits: 32 bits
horloge: 133MHz
fonctionnalités: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pse36 mmx fxsr sse up
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: Internal Cache
taille: 32KiB
capacité: 1MiB
fonctionnalités: synchronous internal write-back unified
*-cache:1
description: L2 cache
identifiant matériel: 6
emplacement: Internal Cache
taille: 256KiB
capacité: 1MiB
fonctionnalités: synchronous internal write-back unified
*-memory
description: Mémoire système
identifiant matériel: 1
taille: 1015MiB
*-pci
description: Host bridge
produit: VT82C693A/694x [Apollo PRO133x]
fabriquant: VIA Technologies, Inc.
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: c4
bits: 32 bits
horloge: 33MHz
configuration: driver=agpgart-via latency=8
ressources: irq:0 mémoire:e0000000-e3ffffff
*-pci
description: PCI bridge
produit: VT82C598/694x [Apollo MVP3/Pro133x AGP]
fabriquant: VIA Technologies, Inc.
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: pci pm normal_decode bus_master cap_list
ressources: portE/S:8000(taille=4096) mémoire:dda00000-dfafffff mémoire:cd700000-dd8fffff
*-display
description: VGA compatible controller
produit: NV17 [GeForce4 MX 440]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a3
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm agp agp-2.0 vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=248 maxlatency=1 mingnt=5
ressources: irq:16 mémoire:de000000-deffffff mémoire:d0000000-d7ffffff mémoire:dd880000-dd8fffff mémoire:dfae0000-dfafffff
*-isa
description: ISA bridge
produit: VT82C686 [Apollo Super South]
fabriquant: VIA Technologies, Inc.
identifiant matériel: 7
information bus: pci@0000:00:07.0
version: 40
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa pm bus_master cap_list
configuration: driver=parport_pc latency=0
ressources: irq:0
*-ide
description: IDE interface
produit: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
fabriquant: VIA Technologies, Inc.
identifiant matériel: 7.1
information bus: pci@0000:00:07.1
nom logique: scsi0
nom logique: scsi1
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: ide pm bus_master cap_list emulated
configuration: driver=pata_via latency=32
ressources: irq:0 portE/S:1f0(taille=8) portE/S:3f6 portE/S:170(taille=8) portE/S:376 portE/S:ffa0(taille=16)
*-disk:0
description: ATA Disk
produit: WDC WD800BB-22JH
fabriquant: Western Digital
identifiant matériel: 0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: 05.0
numéro de série: WD-WCAM94687120
taille: 74GiB (80GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 signature=000e4e04
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
nom logique: /
version: 1.0
numéro de série: dd0b59cd-c623-4bda-8b64-510af757e77e
taille: 73GiB
capacité: 73GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2014-06-09 23:07:33 filesystem=ext4 lastmountpoint=/ modified=2014-06-09 23:50:31 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2014-06-10 22:26:12 state=mounted
*-volume:1
description: Extended partition
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
taille: 1023MiB
capacité: 1023MiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
identifiant matériel: 5
nom logique: /dev/sda5
capacité: 1023MiB
fonctionnalités: nofs
*-disk:1
description: ATA Disk
produit: WDC WD800BB-00JH
fabriquant: Western Digital
identifiant matériel: 0.1.0
information bus: scsi@0:0.1.0
nom logique: /dev/sdb
version: 05.0
numéro de série: WD-WMAM9V610363
taille: 74GiB (80GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 signature=08b908b8
*-volume
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@0:0.1.0,1
nom logique: /dev/sdb1
version: 3.1
numéro de série: a42f982d-fde0-6d4e-8197-27913efa529d
taille: 74GiB
capacité: 74GiB
fonctionnalités: primary bootable ntfs initialized
configuration: clustersize=4096 created=2006-07-13 16:22:51 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
*-cdrom
description: DVD-RAM writer
produit: DVD-RAM GSA-H50N
fabriquant: HL-DT-ST
identifiant matériel: 1
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: 1.03
numéro de série: [
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-usb
description: USB controller
produit: VT82xxxxx UHCI USB 1.1 Controller
fabriquant: VIA Technologies, Inc.
identifiant matériel: 7.2
information bus: pci@0000:00:07.2
version: 1a
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=64
ressources: irq:12 portE/S:cc00(taille=32)
*-serial NON-RÉCLAMÉ
description: SMBus
produit: VT82C686 [Apollo Super ACPI]
fabriquant: VIA Technologies, Inc.
identifiant matériel: 7.4
information bus: pci@0000:00:07.4
version: 40
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm cap_list
configuration: latency=0
*-multimedia:0
description: Multimedia audio controller
produit: VT82C686 AC97 Audio Controller
fabriquant: VIA Technologies, Inc.
identifiant matériel: 7.5
information bus: pci@0000:00:07.5
version: 50
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm cap_list
configuration: driver=snd_via82xx latency=0
ressources: irq:10 portE/S:d800(taille=256) portE/S:d400(taille=4) portE/S:d000(taille=4)
*-multimedia:1
description: Multimedia audio controller
produit: SB Live! EMU10k1
fabriquant: Creative Labs
identifiant matériel: b
information bus: pci@0000:00:0b.0
version: 07
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=snd_emu10k1 latency=64 maxlatency=20 mingnt=2
ressources: irq:19 portE/S:c800(taille=32)
*-input
description: Input device controller
produit: SB Live! Game Port
fabriquant: Creative Labs
identifiant matériel: b.1
information bus: pci@0000:00:0b.1
version: 07
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=Emu10k1_gameport latency=64
ressources: irq:0 portE/S:dc00(taille=8)
*-network
description: Ethernet interface
produit: 82557/8/9/0/1 Ethernet Pro 100
fabriquant: Intel Corporation
identifiant matériel: c
information bus: pci@0000:00:0c.0
nom logique: eth0
version: 04
numéro de série: 00:a0:c9:9e:11:98
taille: 10Mbit/s
capacité: 100Mbit/s
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s
ressources: irq:16 mémoire:dd9ff000-dd9fffff portE/S:c400(taille=32) mémoire:dff00000-dfffffff mémoire:dfe00000-dfefffff
*-network
description: Interface réseau sans fil
identifiant matériel: 1
information bus: usb@1:2
nom logique: wlan0
numéro de série: 00:e0:4c:00:22:cd
fonctionnalités: ethernet physical wireless
configuration: broadcast=yes driver=rtl8187 driverversion=3.2.0-64-generic firmware=N/A ip=192.168.1.111 link=yes multicast=yes wireless=IEEE 802.11bgdmesg:
pascal@pascal-desktop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-64-generic (buildd@tipua) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #97-Ubuntu SMP Wed Jun 4 22:03:48 UTC 2014 (Ubuntu 3.2.0-64.97-generic 3.2.59)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: /6VTXE / 6VTXE-A, BIOS 6.27.10 05/03/2002
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [c00fb200] fb200
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bf8000-1c00000
[ 0.000000] RAMDISK: 364dc000 - 37266000
[ 0.000000] ACPI: RSDP 000fc540 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 3fff0000 0002C (v01 AMIINT VIA_P6 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP 3fff0030 00074 (v01 AMIINT VIA_P6 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3fff0110 02D13 (v01 VIA APOLLO-P 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 3fff8000 00040
[ 0.000000] ACPI: APIC 3fff00b0 00054 (v01 AMIINT 00000009 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c182dec0, node_mem_map f5cdc200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77e9000 s31616 r0 d21632 u53248
[ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-64-generic root=UUID=dd0b59cd-c623-4bda-8b64-510af757e77e ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4193792 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[ 0.000000] Memory: 1010964k/1048512k available (5647k kernel code, 37096k reserved, 2777k data, 716k init, 139208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc183b000 - 0xc18ee000 ( 716 kB)
[ 0.000000] .data : 0xc1583f04 - 0xc183a600 (2777 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1583f04 (5647 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1130.516 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2261.03 BogoMIPS (lpj=4522064)
[ 0.004021] pid_max: default: 32768 minimum: 301
[ 0.004094] Security Framework initialized
[ 0.004173] AppArmor: AppArmor initialized
[ 0.004179] Yama: becoming mindful.
[ 0.004342] Mount-cache hash table entries: 512
[ 0.004737] Initializing cgroup subsys cpuacct
[ 0.004756] Initializing cgroup subsys memory
[ 0.004778] Initializing cgroup subsys devices
[ 0.004786] Initializing cgroup subsys freezer
[ 0.004792] Initializing cgroup subsys blkio
[ 0.004811] Initializing cgroup subsys perf_event
[ 0.004889] mce: CPU supports 5 MCE banks
[ 0.005013] SMP alternatives: switching to UP code
[ 0.019638] Freeing SMP alternatives: 24k freed
[ 0.019681] ACPI: Core revision 20110623
[ 0.024049] ftrace: allocating 25532 entries in 50 pages
[ 0.028290] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.029641] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069883] CPU0: Intel(R) Pentium(R) III CPU 1133MHz stepping 01
[ 0.072003] Performance Events: p6 PMU driver.
[ 0.072003] ... version: 0
[ 0.072003] ... bit width: 32
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 00000000ffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 0
[ 0.072003] ... event mask: 0000000000000003
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] Brought up 1 CPUs
[ 0.072003] Total of 1 processors activated (2261.03 BogoMIPS).
[ 0.072003] devtmpfs: initialized
[ 0.072003] EVM: security.selinux
[ 0.072003] EVM: security.SMACK64
[ 0.072003] EVM: security.capability
[ 0.072003] PM: Registering ACPI NVS region at 3fff8000 (32768 bytes)
[ 0.074566] print_constraints: dummy:
[ 0.074628] RTC time: 2:25:57, date: 06/11/14
[ 0.074739] NET: Registered protocol family 16
[ 0.075060] EISA bus registered
[ 0.075148] ACPI: bus type pci registered
[ 0.077240] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[ 0.077246] PCI: Using configuration type 1 for base access
[ 0.080713] bio: create slab <bio-0> at 0
[ 0.081012] ACPI: Added _OSI(Module Device)
[ 0.081021] ACPI: Added _OSI(Processor Device)
[ 0.081027] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.081033] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.082302] ACPI: EC: Look up EC in DSDT
[ 0.088539] ACPI: Interpreter enabled
[ 0.088565] ACPI: (supports S0 S1 S4 S5)
[ 0.088615] ACPI: Using IOAPIC for interrupt routing
[ 0.090182] ACPI: Power Resource [URP1] (off)
[ 0.090283] ACPI: Power Resource [URP2] (off)
[ 0.090380] ACPI: Power Resource [FDDP] (off)
[ 0.090485] ACPI: Power Resource [LPTP] (off)
[ 0.094818] ACPI: No dock devices found.
[ 0.094829] HEST: Table not found.
[ 0.094844] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.095053] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.095389] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.095397] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.095405] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.095412] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.095420] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffdfffff] (ignored)
[ 0.095427] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[ 0.095456] pci 0000:00:00.0: [1106:0691] type 0 class 0x000600
[ 0.095474] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
[ 0.095548] pci 0000:00:01.0: [1106:8598] type 1 class 0x000604
[ 0.095593] pci 0000:00:01.0: supports D1
[ 0.095619] pci 0000:00:07.0: [1106:0686] type 0 class 0x000601
[ 0.095714] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101
[ 0.095759] pci 0000:00:07.1: reg 20: [io 0xffa0-0xffaf]
[ 0.095817] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03
[ 0.095860] pci 0000:00:07.2: reg 20: [io 0xcc00-0xcc1f]
[ 0.095917] pci 0000:00:07.4: [1106:3057] type 0 class 0x000c05
[ 0.096029] pci 0000:00:07.4: quirk: [io 0x0c00-0x0c7f] claimed by vt82c686 HW-mon
[ 0.096039] pci 0000:00:07.4: quirk: [io 0x0400-0x040f] claimed by vt82c686 SMB
[ 0.096088] pci 0000:00:07.5: [1106:3058] type 0 class 0x000401
[ 0.096108] pci 0000:00:07.5: reg 10: [io 0xd800-0xd8ff]
[ 0.096121] pci 0000:00:07.5: reg 14: [io 0xd400-0xd403]
[ 0.096135] pci 0000:00:07.5: reg 18: [io 0xd000-0xd003]
[ 0.096210] pci 0000:00:0b.0: [1102:0002] type 0 class 0x000401
[ 0.096229] pci 0000:00:0b.0: reg 10: [io 0xc800-0xc81f]
[ 0.096292] pci 0000:00:0b.0: supports D1 D2
[ 0.096314] pci 0000:00:0b.1: [1102:7002] type 0 class 0x000980
[ 0.096332] pci 0000:00:0b.1: reg 10: [io 0xdc00-0xdc07]
[ 0.096394] pci 0000:00:0b.1: supports D1 D2
[ 0.096423] pci 0000:00:0c.0: [8086:1229] type 0 class 0x000200
[ 0.096442] pci 0000:00:0c.0: reg 10: [mem 0xdd9ff000-0xdd9fffff pref]
[ 0.096455] pci 0000:00:0c.0: reg 14: [io 0xc400-0xc41f]
[ 0.096468] pci 0000:00:0c.0: reg 18: [mem 0xdff00000-0xdfffffff]
[ 0.096498] pci 0000:00:0c.0: reg 30: [mem 0xdfe00000-0xdfefffff pref]
[ 0.096524] pci 0000:00:0c.0: supports D1 D2
[ 0.096531] pci 0000:00:0c.0: PME# supported from D0 D1
[ 0.096539] pci 0000:00:0c.0: PME# disabled
[ 0.096603] pci 0000:01:00.0: [10de:0171] type 0 class 0x000300
[ 0.096623] pci 0000:01:00.0: reg 10: [mem 0xde000000-0xdeffffff]
[ 0.096636] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref]
[ 0.096649] pci 0000:01:00.0: reg 18: [mem 0xdd880000-0xdd8fffff pref]
[ 0.096678] pci 0000:01:00.0: reg 30: [mem 0xdfae0000-0xdfafffff pref]
[ 0.096743] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.096752] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
[ 0.096761] pci 0000:00:01.0: bridge window [mem 0xdda00000-0xdfafffff]
[ 0.096770] pci 0000:00:01.0: bridge window [mem 0xcd700000-0xdd8fffff pref]
[ 0.096783] pci_bus 0000:00: on NUMA node 0
[ 0.096796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.097186] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.099801] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.099937] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.100110] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.100237] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.100578] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.100586] vgaarb: loaded
[ 0.100590] vgaarb: bridge control possible 0000:01:00.0
[ 0.100930] i2c-core: driver [aat2870] using legacy suspend method
[ 0.100936] i2c-core: driver [aat2870] using legacy resume method
[ 0.101196] SCSI subsystem initialized
[ 0.101374] libata version 3.00 loaded.
[ 0.101518] usbcore: registered new interface driver usbfs
[ 0.101553] usbcore: registered new interface driver hub
[ 0.101640] usbcore: registered new device driver usb
[ 0.101942] PCI: Using ACPI for IRQ routing
[ 0.101953] PCI: pci_cache_line_size set to 32 bytes
[ 0.102031] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.102039] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 0.102334] NetLabel: Initializing
[ 0.102339] NetLabel: domain hash size = 128
[ 0.102343] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.102373] NetLabel: unlabeled traffic allowed by default
[ 0.128147] AppArmor: AppArmor Filesystem Enabled
[ 0.128260] pnp: PnP ACPI init
[ 0.128316] ACPI: bus type pnp registered
[ 0.128610] pnp 00:00: [bus 00-ff]
[ 0.128619] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.128627] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.128646] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.128654] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.128661] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.128667] pnp 00:00: [mem 0x40000000-0xffdfffff window]
[ 0.128674] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
[ 0.128828] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.128939] pnp 00:01: [dma 4]
[ 0.128946] pnp 00:01: [io 0x0000-0x000f]
[ 0.128952] pnp 00:01: [io 0x0081-0x0083]
[ 0.128958] pnp 00:01: [io 0x0087]
[ 0.128964] pnp 00:01: [io 0x0089-0x008b]
[ 0.128970] pnp 00:01: [io 0x008f]
[ 0.128975] pnp 00:01: [io 0x00c0-0x00df]
[ 0.129054] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.129086] pnp 00:02: [io 0x0070-0x0071]
[ 0.129117] pnp 00:02: [irq 8]
[ 0.129183] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.129209] pnp 00:03: [io 0x0061]
[ 0.129283] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.129309] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.129323] pnp 00:04: [irq 13]
[ 0.129389] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.129506] pnp 00:05: [io 0x0060]
[ 0.129513] pnp 00:05: [io 0x0064]
[ 0.129528] pnp 00:05: [irq 1]
[ 0.129604] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.129816] pnp 00:06: [io 0x03f2-0x03f5]
[ 0.129823] pnp 00:06: [io 0x03f7]
[ 0.129839] pnp 00:06: [irq 6]
[ 0.129845] pnp 00:06: [dma 2]
[ 0.129962] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.130335] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.130350] pnp 00:07: [irq 4]
[ 0.130475] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.130823] pnp 00:08: [io 0x02f8-0x02ff]
[ 0.130838] pnp 00:08: [irq 3]
[ 0.130961] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.131475] pnp 00:09: [io 0x0378-0x037f]
[ 0.131482] pnp 00:09: [io 0x0778-0x077b]
[ 0.131496] pnp 00:09: [irq 7]
[ 0.131503] pnp 00:09: [dma 3]
[ 0.131656] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.132161] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.132169] pnp 00:0a: [mem 0x000f0000-0x000fffff]
[ 0.132176] pnp 00:0a: [mem 0x00100000-0x3fffffff]
[ 0.132182] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.132189] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.132195] pnp 00:0a: [mem 0xfff80000-0xffffffff]
[ 0.132350] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.132360] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.132368] system 00:0a: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.132376] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.132384] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.132392] system 00:0a: [mem 0xfff80000-0xffffffff] could not be reserved
[ 0.132402] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.132431] pnp: PnP ACPI: found 11 devices
[ 0.132436] ACPI: ACPI bus type pnp unregistered
[ 0.132446] PnPBIOS: Disabled by ACPI PNP
[ 0.172469] Switching to clocksource acpi_pm
[ 0.172535] PCI: max bus depth: 1 pci_try_num: 2
[ 0.172570] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.172581] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
[ 0.172591] pci 0000:00:01.0: bridge window [mem 0xdda00000-0xdfafffff]
[ 0.172600] pci 0000:00:01.0: bridge window [mem 0xcd700000-0xdd8fffff pref]
[ 0.172623] pci 0000:00:01.0: setting latency timer to 64
[ 0.172634] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.172641] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.172648] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
[ 0.172655] pci_bus 0000:01: resource 1 [mem 0xdda00000-0xdfafffff]
[ 0.172662] pci_bus 0000:01: resource 2 [mem 0xcd700000-0xdd8fffff pref]
[ 0.172793] NET: Registered protocol family 2
[ 0.172979] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.173829] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.179513] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.182685] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.182702] TCP reno registered
[ 0.182728] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.182832] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.183258] NET: Registered protocol family 1
[ 0.183325] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.183338] pci 0000:00:07.0: Enabling VIA external APIC routing
[ 0.183398] pci 0000:00:07.2: PCI INT D -> GSI 12 (level, low) -> IRQ 12
[ 0.183425] pci 0000:00:07.2: PCI INT D disabled
[ 0.183479] pci 0000:00:0c.0: Firmware left e100 interrupts enabled; disabling
[ 0.183504] pci 0000:01:00.0: Boot video device
[ 0.183511] PCI: CLS 32 bytes, default 32
[ 0.184648] audit: initializing netlink socket (disabled)
[ 0.184682] type=2000 audit(1402453557.184:1): initialized
[ 0.232795] Trying to unpack rootfs image as initramfs...
[ 0.292874] highmem bounce pool size: 64 pages
[ 0.292894] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.299353] VFS: Disk quotas dquot_6.5.2
[ 0.299527] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.301294] fuse init (API version 7.17)
[ 0.301595] msgmni has been set to 1702
[ 0.316788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.316966] io scheduler noop registered
[ 0.316972] io scheduler deadline registered
[ 0.317006] io scheduler cfq registered (default)
[ 0.317398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.317456] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.317878] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.317895] ACPI: Power Button [PWRB]
[ 0.318026] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.318036] ACPI: Sleep Button [SLPB]
[ 0.318153] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.318162] ACPI: Power Button [PWRF]
[ 0.320993] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.321003] ACPI: Thermal Zone [THRM] (30 C)
[ 0.321094] ERST: Table is not found!
[ 0.321099] GHES: HEST is not enabled!
[ 0.325106] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.345810] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.345905] isapnp: Scanning for PnP cards...
[ 0.436930] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.526751] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.569179] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.636912] Linux agpgart interface v0.103
[ 0.637118] agpgart: Detected VIA Apollo Pro 133 chipset
[ 0.644418] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 0.653459] brd: module loaded
[ 0.655770] loop: module loaded
[ 0.657495] Fixed MDIO Bus: probed
[ 0.657560] tun: Universal TUN/TAP device driver, 1.6
[ 0.657565] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.660249] PPP generic driver version 2.4.2
[ 0.660634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.660728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.660769] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.660869] uhci_hcd 0000:00:07.2: PCI INT D -> GSI 12 (level, low) -> IRQ 12
[ 0.660896] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.661039] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 0.661115] uhci_hcd 0000:00:07.2: irq 12, io base 0x0000cc00
[ 0.661568] hub 1-0:1.0: USB hub found
[ 0.661583] hub 1-0:1.0: 2 ports detected
[ 0.661863] usbcore: registered new interface driver libusual
[ 0.661983] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.661989] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.662277] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.668752] mousedev: PS/2 mouse device common for all mice
[ 0.669231] rtc_cmos 00:02: RTC can wake from S4
[ 0.669489] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.669557] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.669809] device-mapper: uevent: version 1.0.3
[ 0.670049] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.670125] EISA: Probing bus 0 at eisa.0
[ 0.670180] Cannot allocate resource for EISA slot 8
[ 0.670186] EISA: Detected 0 cards.
[ 0.670215] cpufreq-nforce2: No nForce2 chipset.
[ 0.670222] cpuidle: using governor ladder
[ 0.670227] cpuidle: using governor menu
[ 0.670232] EFI Variables Facility v0.08 2004-May-17
[ 0.670917] TCP cubic registered
[ 0.671350] NET: Registered protocol family 10
[ 0.673018] NET: Registered protocol family 17
[ 0.673036] Registering the dns_resolver key type
[ 0.673165] Using IPI No-Shortcut mode
[ 0.673477] PM: Hibernation image not present or could not be loaded.
[ 0.673509] registered taskstats version 1
[ 0.691114] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.004063] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.059768] isapnp: No Plug & Play device found
[ 1.232172] Refined TSC clocksource calibration: 1130.447 MHz.
[ 1.232194] Switching to clocksource tsc
[ 1.241646] hub 1-1:1.0: USB hub found
[ 1.243637] hub 1-1:1.0: 4 ports detected
[ 1.360400] usb 1-2: new full-speed USB device number 3 using uhci_hcd
[ 1.542492] Freeing initrd memory: 13864k freed
[ 1.602753] Magic number: 2:409:409
[ 1.602959] rtc_cmos 00:02: setting system clock to 2014-06-11 02:25:59 UTC (1402453559)
[ 1.603007] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.603012] EDD information not available.
[ 1.603425] Freeing unused kernel memory: 716k freed
[ 1.605326] Write protecting the kernel text: 5648k
[ 1.605432] Write protecting the kernel read-only data: 2336k
[ 1.650119] usb 1-1.1: new low-speed USB device number 4 using uhci_hcd
[ 1.671226] udevd[79]: starting version 175
[ 2.042942] Floppy drive(s): fd0 is 1.44M
[ 2.059890] FDC 0 is a post-1991 82077
[ 2.091770] pata_via 0000:00:07.1: version 0.3.4
[ 2.107839] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.107851] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.125099] scsi0 : pata_via
[ 2.131060] scsi1 : pata_via
[ 2.135943] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.135953] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.146597] e100 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.232802] e100 0000:00:0c.0: PME# disabled
[ 2.234098] e100 0000:00:0c.0: eth0: addr 0xdd9ff000, irq 16, MAC addr 00:a0:c9:9e:11:98
[ 2.308562] ata1.00: ATA-6: WDC WD800BB-22JHC0, 05.01C05, max UDMA/100
[ 2.308574] ata1.00: 156301488 sectors, multi 16: LBA
[ 2.308712] ata1.01: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
[ 2.308720] ata1.01: 156301488 sectors, multi 16: LBA
[ 2.316557] ata1.00: configured for UDMA/100
[ 2.324581] ata1.01: configured for UDMA/100
[ 2.324918] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-22JH 05.0 PQ: 0 ANSI: 5
[ 2.325474] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.325870] scsi 0:0:1:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
[ 2.326261] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 2.326644] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.326780] sd 0:0:0:0: [sda] Write Protect is off
[ 2.326789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.326847] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.358370] sda: sda1 sda2 < sda5 >
[ 2.358593] sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.358870] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.358879] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.359039] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.369295] sdb: sdb1
[ 2.369597] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.370220] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.488456] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H50N, 1.03, max UDMA/66
[ 2.488474] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 2.504437] ata2.00: configured for UDMA/33
[ 2.507240] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H50N 1.03 PQ: 0 ANSI: 5
[ 2.510106] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.510117] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.510506] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.510832] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 2.537983] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[ 2.542798] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:07.2-1.1/input0
[ 2.542854] usbcore: registered new interface driver usbhid
[ 2.542860] usbhid: USB HID core driver
[ 3.289965] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.658193] Adding 1047548k swap on /dev/sda5. Priority:-1 extents:1 across:1047548k
[ 14.720444] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.780210] udevd[305]: starting version 175
[ 14.903918] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.911451] lp: driver loaded but no devices found
[ 15.402500] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.491019] parport_pc: VIA 686A/8231 detected
[ 15.491032] parport_pc: probing current configuration
[ 15.491053] parport_pc: Current parallel port base: 0x378
[ 15.491133] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 15.616811] lp0: using parport0 (interrupt-driven).
[ 15.616824] parport_pc: VIA parallel port: io=0x378, irq=7
[ 15.831280] ppdev: user-space parallel port driver
[ 15.879601] Bluetooth: Core ver 2.16
[ 15.881465] NET: Registered protocol family 31
[ 15.881479] Bluetooth: HCI device and connection manager initialized
[ 15.881488] Bluetooth: HCI socket layer initialized
[ 15.881493] Bluetooth: L2CAP socket layer initialized
[ 15.881522] Bluetooth: SCO socket layer initialized
[ 15.932225] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.932239] Bluetooth: BNEP filters: protocol multicast
[ 15.969601] Bluetooth: RFCOMM TTY layer initialized
[ 15.969620] Bluetooth: RFCOMM socket layer initialized
[ 15.969626] Bluetooth: RFCOMM ver 1.11
[ 16.030091] type=1400 audit(1402453573.921:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=488 comm="apparmor_parser"
[ 16.034206] type=1400 audit(1402453573.925:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=488 comm="apparmor_parser"
[ 16.618460] nvidia: module license 'NVIDIA' taints kernel.
[ 16.618479] Disabling lock debugging due to kernel taint
[ 16.636606] ACPI: resource via686a [io 0x0c00-0x0c7f] conflicts with ACPI region TSN1 [io 0xc20-0xc20]
[ 16.636618] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.657115] gameport gameport0: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xdc00, speed 1242kHz
[ 16.813678] cfg80211: Calling CRDA to update world regulatory domain
[ 17.766889] type=1400 audit(1402453575.657:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=591 comm="apparmor_parser"
[ 17.778023] type=1400 audit(1402453575.669:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=591 comm="apparmor_parser"
[ 17.778769] type=1400 audit(1402453575.669:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=591 comm="apparmor_parser"
[ 18.790477] init: failsafe main process (672) killed by TERM signal
[ 19.088627] snd_emu10k1 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 19.341680] type=1400 audit(1402453577.233:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=775 comm="apparmor_parser"
[ 19.342901] type=1400 audit(1402453577.233:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=775 comm="apparmor_parser"
[ 19.394531] type=1400 audit(1402453577.285:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=776 comm="apparmor_parser"
[ 19.404270] type=1400 audit(1402453577.297:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=776 comm="apparmor_parser"
[ 19.405038] type=1400 audit(1402453577.297:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=776 comm="apparmor_parser"
[ 19.606609] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.610635] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.877160] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.877189] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 19.896560] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.23 Fri Aug 31 14:52:31 PDT 2012
[ 20.930074] cfg80211: World regulatory domain updated:
[ 20.930090] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.930098] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.930105] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.930113] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.930120] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.930127] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.102280] snd_via82xx 0000:00:07.5: PCI INT C -> GSI 10 (level, low) -> IRQ 10
[ 21.102490] snd_via82xx 0000:00:07.5: setting latency timer to 64
[ 21.279270] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279284] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279291] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279299] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279305] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279319] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279327] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279333] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279341] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279347] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279355] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279361] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279369] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279375] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279383] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279389] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279397] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279403] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279411] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279417] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279425] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.279432] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279439] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.279446] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279454] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.279460] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 21.279468] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.299196] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 21.302372] ieee80211 phy0: hwaddr 00:e0:4c:00:22:cd, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 21.398826] rtl8187: Customer ID is 0x00
[ 21.402915] Registered led device: rtl8187-phy0::radio
[ 21.407469] Registered led device: rtl8187-phy0::tx
[ 21.413345] Registered led device: rtl8187-phy0::rx
[ 21.416784] rtl8187: wireless switch is on
[ 21.419687] usbcore: registered new interface driver rtl8187
[ 21.817002] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 21.817012] vesafb: scrolling: redraw
[ 21.817020] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 21.818215] vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 3072k, total 3072k
[ 21.821302] fbcon: VESA VGA (fb0) is primary device
[ 21.821683] Console: switching to colour frame buffer device 128x48
[ 21.821761] fb0: VESA VGA frame buffer device
[ 24.808399] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 24.808435] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 24.808502] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
[ 27.214320] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.216741] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.325610] wlan0: authenticate with 00:1e:e5:60:7f:19 (try 1)
[ 34.330602] wlan0: authenticated
[ 34.331809] wlan0: associate with 00:1e:e5:60:7f:19 (try 1)
[ 34.335604] wlan0: RX AssocResp from 00:1e:e5:60:7f:19 (capab=0x411 status=0 aid=5)
[ 34.335615] wlan0: associated
[ 34.350013] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 46.024073] wlan0: no IPv6 routers presentJ'espère que ces infos vont être utile.
Merci et bonne soirée!
Pascal
Hors ligne
#4 Le 11/06/2014, à 05:42
- moko138
Re : Configuration d'une carte ISA sur ancien système avec carte Boltek
1) Puisque "Tout fonctionne sur le vieux Windows XP", pourquoi ne t'y tiens-tu pas, dès lors que ton xp n'est pas connecté ?
2) Extrait de ton lshw :
*-isa
description: ISA bridge
produit: VT82C686 [Apollo Super South]
fabriquant: VIA Technologies, Inc.
identifiant matériel: 7
information bus: pci@0000:00:07.0
version: 40
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa pm bus_master cap_list
configuration: driver=parport_pc latency=0
ressources: irq:0
*-idePuisque le système passe de *-isa à *-ide sans mentionner de carte, c'est qu'il n'en voit pas.
L'explication est au début du dmesg :
[ 0.670125] EISA: Probing bus 0 at eisa.0
[ 0.670180] Cannot allocate resource for EISA slot 8
[ 0.670186] EISA: Detected 0 cards.
[ 1.059768] isapnp: No Plug & Play device found2a) Je suppose que cela serait aussi un obstacle au contournement par virtualisation de xp dans xubuntu, mais n'en suis pas sûr.
2b) J'ai bien une autre idée, incertaine (modifier l'attribution des IRQ dans le bios ou les attributions de mémoire à l'irq 0), mais c'est tellement casse-g. que je préfère qu'un cador donne son avis éclairé.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 11/06/2014, à 06:00
- Pascal777ok
Re : Configuration d'une carte ISA sur ancien système avec carte Boltek
Bonjour!
Merci de ta réponse. Pour ce qui est de Windows XP c'est vraiment drôle car Microsoft ont annoncé la fin de son support pour avril 2014 mais ils ont pourtant envoyé une mise à jour de sécurité en mai (supposément la dernière) et encore (surprise!) une autre en juin tout dernièrement. De plus une personne en Allemagne (si je me souviens bien) a découvert comment entrer un code dans Windows XP dans le registre pour lui faire croire que c'est un Windows XP pour les machines de billets de banque pour lequel les mise à jour ne cesseront pas de sitôt. J'ai vu cela en cherchant dans Google car tellement de gens utilisent encore XP que j'imaginais bien que quelqu'un quelque part trouverait une porte de sortie au problème de support Microsoft qui devrait terminer un jour...
Mais bon pour ce qui est de mon système de détection de foudre j'imagine que techniquement il y a bien une façon de contourner ce problème. La carte étant spécialisée je croyais que Wine pouvait par l'installation du logiciel de Windows utiliser ses drivers et pouvoir la faire fonctionner ce qui n'a pas été le cas. J'aimerais bien sûr utiliser Xubuntu ou Ubuntu autant que possible au lieu de Windows XP. J'apprécie moins Windows même 7 ou autre depuis que je connais Ubuntu et Xubuntu. Tellement mieux ici avec un support incroyable et cela nous fait acquérir des connaissances très avantageuses en informatique.
Bonne semaine!
Pascal
Hors ligne