#1 Le 27/07/2014, à 22:30
- broussaille
Perte du signal HDMI après zapping télé ou mise en veille, intel i915
(edit titre : le driver i915 semble être au cœur du problème)
Bonsoir,
j'ai un nouveau HTPC avec une carte graphique intelHD intégrée.
Il est connecté en HDMI sur l'écran télé(LG) et l'image, le son sont impeccables.
Le problème, c'est que si une fois qu'il est en fonctionnement je zappe plus de 10s sur la télé (antenne ou box en HDMI aussi), qd je reviens sur la sortie HDMI de l'ordi, l'écran indique "pas de signal". Idem, si l'ordi se met en veille, impossible de relancer l'affichage (par contre, l'ordi lui repart en agitant la souris).
Pour le moment, j'ai gardé le dual boot, et il n'y a pas ce problème avec windows. Donc, a priori, le problème ne vient pas de l'écran, ni du bios (de toute manière je l'ai testé en mode S1, S3 sur RAM... ça change rien). Mes recherches google, me renvoient soit à des problèmes "pas d'image du tout, jamais", ou à des problèmes similaires mais en 2008 avec des cartes GMA 500...
J'ai installé Xubuntu 14.04.
La télé n'a pas de port VGA pour tester, et je n'ai plus d'autre écran...
Ci-dessous, retour de lspci et fichier Xorg.0.log :
Toute idée sera accueillie avec plaisir.
lspci | grep "VGA compatible controller"
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
seb@Meijin:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 03)[ 5.214]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 5.214] X Protocol Version 11, Revision 0
[ 5.214] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 5.214] Current Operating System: Linux Meijin 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64
[ 5.214] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=9820004e-8a43-4459-bab2-d9df337ab8e5 ro quiet splash vt.handoff=7
[ 5.214] Build Date: 16 April 2014 01:36:29PM
[ 5.214] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 5.214] Current version of pixman: 0.30.2
[ 5.214] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.214] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.214] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 27 21:52:36 2014
[ 5.215] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.215] (==) No Layout section. Using the first Screen section.
[ 5.215] (==) No screen section available. Using defaults.
[ 5.215] (**) |-->Screen "Default Screen Section" (0)
[ 5.215] (**) | |-->Monitor "<default monitor>"
[ 5.215] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.215] (==) Automatically adding devices
[ 5.215] (==) Automatically enabling devices
[ 5.215] (==) Automatically adding GPU devices
[ 5.215] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 5.215] Entry deleted from font path.
[ 5.215] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 5.215] Entry deleted from font path.
[ 5.215] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 5.215] Entry deleted from font path.
[ 5.215] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 5.215] Entry deleted from font path.
[ 5.215] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 5.215] Entry deleted from font path.
[ 5.215] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 5.215] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 5.215] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.215] (II) Loader magic: 0x7f378f119d60
[ 5.215] (II) Module ABI versions:
[ 5.215] X.Org ANSI C Emulation: 0.4
[ 5.215] X.Org Video Driver: 15.0
[ 5.215] X.Org XInput driver : 20.0
[ 5.215] X.Org Server Extension : 8.0
[ 5.216] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.217] (--) PCI:*(0:0:2:0) 8086:0152:19da:a171 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 5.217] Initializing built-in extension Generic Event Extension
[ 5.217] Initializing built-in extension SHAPE
[ 5.217] Initializing built-in extension MIT-SHM
[ 5.217] Initializing built-in extension XInputExtension
[ 5.217] Initializing built-in extension XTEST
[ 5.217] Initializing built-in extension BIG-REQUESTS
[ 5.217] Initializing built-in extension SYNC
[ 5.217] Initializing built-in extension XKEYBOARD
[ 5.217] Initializing built-in extension XC-MISC
[ 5.217] Initializing built-in extension SECURITY
[ 5.217] Initializing built-in extension XINERAMA
[ 5.217] Initializing built-in extension XFIXES
[ 5.217] Initializing built-in extension RENDER
[ 5.217] Initializing built-in extension RANDR
[ 5.217] Initializing built-in extension COMPOSITE
[ 5.217] Initializing built-in extension DAMAGE
[ 5.217] Initializing built-in extension MIT-SCREEN-SAVER
[ 5.217] Initializing built-in extension DOUBLE-BUFFER
[ 5.217] Initializing built-in extension RECORD
[ 5.217] Initializing built-in extension DPMS
[ 5.217] Initializing built-in extension Present
[ 5.217] Initializing built-in extension DRI3
[ 5.217] Initializing built-in extension X-Resource
[ 5.217] Initializing built-in extension XVideo
[ 5.217] Initializing built-in extension XVideo-MotionCompensation
[ 5.217] Initializing built-in extension SELinux
[ 5.217] Initializing built-in extension XFree86-VidModeExtension
[ 5.217] Initializing built-in extension XFree86-DGA
[ 5.217] Initializing built-in extension XFree86-DRI
[ 5.217] Initializing built-in extension DRI2
[ 5.217] (II) LoadModule: "glx"
[ 5.218] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.226] (II) Module glx: vendor="X.Org Foundation"
[ 5.226] compiled for 1.15.1, module version = 1.0.0
[ 5.226] ABI class: X.Org Server Extension, version 8.0
[ 5.226] (==) AIGLX enabled
[ 5.226] Loading extension GLX
[ 5.226] (==) Matched intel as autoconfigured driver 0
[ 5.226] (==) Matched intel as autoconfigured driver 1
[ 5.226] (==) Matched modesetting as autoconfigured driver 2
[ 5.226] (==) Matched fbdev as autoconfigured driver 3
[ 5.226] (==) Matched vesa as autoconfigured driver 4
[ 5.226] (==) Assigned the driver to the xf86ConfigLayout
[ 5.226] (II) LoadModule: "intel"
[ 5.226] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 5.227] (II) Module intel: vendor="X.Org Foundation"
[ 5.227] compiled for 1.15.0, module version = 2.99.910
[ 5.227] Module class: X.Org Video Driver
[ 5.227] ABI class: X.Org Video Driver, version 15.0
[ 5.227] (II) LoadModule: "modesetting"
[ 5.227] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.227] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.227] compiled for 1.15.0, module version = 0.8.1
[ 5.227] Module class: X.Org Video Driver
[ 5.227] ABI class: X.Org Video Driver, version 15.0
[ 5.227] (II) LoadModule: "fbdev"
[ 5.227] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5.227] (II) Module fbdev: vendor="X.Org Foundation"
[ 5.227] compiled for 1.15.0, module version = 0.4.4
[ 5.227] Module class: X.Org Video Driver
[ 5.227] ABI class: X.Org Video Driver, version 15.0
[ 5.227] (II) LoadModule: "vesa"
[ 5.227] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.227] (II) Module vesa: vendor="X.Org Foundation"
[ 5.227] compiled for 1.15.0, module version = 2.3.3
[ 5.227] Module class: X.Org Video Driver
[ 5.227] ABI class: X.Org Video Driver, version 15.0
[ 5.227] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 5.228] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 5.228] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 5.228] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 5.228] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.228] (II) FBDEV: driver for framebuffer: fbdev
[ 5.228] (II) VESA: driver for VESA chipsets: vesa
[ 5.228] (++) using VT number 7
[ 5.228] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 (Timo Aaltonen <tjaalton@ubuntu.com>)
[ 5.228] (WW) Falling back to old probe method for modesetting
[ 5.228] (WW) Falling back to old probe method for fbdev
[ 5.228] (II) Loading sub module "fbdevhw"
[ 5.228] (II) LoadModule: "fbdevhw"
[ 5.228] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5.228] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5.228] compiled for 1.15.1, module version = 0.0.2
[ 5.228] ABI class: X.Org Video Driver, version 15.0
[ 5.228] (WW) Falling back to old probe method for vesa
[ 5.228] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2500
[ 5.229] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 5.229] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.229] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 5.229] (==) intel(0): RGB weight 888
[ 5.229] (==) intel(0): Default visual is TrueColor
[ 5.229] (**) intel(0): Framebuffer tiled
[ 5.229] (**) intel(0): Pixmaps tiled
[ 5.229] (**) intel(0): "Tear free" disabled
[ 5.229] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 5.229] (II) intel(0): Output VGA1 has no monitor section
[ 5.229] (II) intel(0): Output HDMI1 has no monitor section
[ 5.229] (II) intel(0): Output DP1 has no monitor section
[ 5.229] (II) intel(0): Output HDMI2 has no monitor section
[ 5.229] (II) intel(0): Output HDMI3 has no monitor section
[ 5.229] (II) intel(0): Output DP2 has no monitor section
[ 5.229] (II) intel(0): Output DP3 has no monitor section
[ 5.229] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 5.229] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[ 5.229] (==) intel(0): DPI set to (96, 96)
[ 5.229] (II) Loading sub module "dri2"
[ 5.229] (II) LoadModule: "dri2"
[ 5.229] (II) Module "dri2" already built-in
[ 5.229] (II) UnloadModule: "modesetting"
[ 5.229] (II) Unloading modesetting
[ 5.229] (II) UnloadModule: "fbdev"
[ 5.229] (II) Unloading fbdev
[ 5.229] (II) UnloadSubModule: "fbdevhw"
[ 5.229] (II) Unloading fbdevhw
[ 5.229] (II) UnloadModule: "vesa"
[ 5.229] (II) Unloading vesa
[ 5.229] (==) Depth 24 pixmap format is 32 bpp
[ 5.229] (II) intel(0): SNA initialized with Ivybridge (gen7, gt1) backend
[ 5.229] (==) intel(0): Backing store enabled
[ 5.229] (==) intel(0): Silken mouse enabled
[ 5.229] (II) intel(0): HW Cursor enabled
[ 5.229] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.230] (==) intel(0): DPMS enabled
[ 5.230] (II) intel(0): [DRI2] Setup complete
[ 5.230] (II) intel(0): [DRI2] DRI driver: i965
[ 5.230] (II) intel(0): [DRI2] VDPAU driver: i965
[ 5.230] (II) intel(0): direct rendering: DRI2 Enabled
[ 5.230] (==) intel(0): hotplug detection: "enabled"
[ 5.230] (--) RandR disabled
[ 5.234] (II) SELinux: Disabled on system
[ 5.238] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.238] (II) AIGLX: enabled GLX_ARB_create_context
[ 5.238] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5.238] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 5.238] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.238] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.238] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 5.238] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 5.238] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.238] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 5.238] (II) AIGLX: Loaded and initialized i965
[ 5.238] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.240] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[ 5.260] (II) intel(0): Setting screen physical size to 508 x 285
[ 5.267] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 5.269] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.269] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.269] (II) LoadModule: "evdev"
[ 5.269] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5.270] (II) Module evdev: vendor="X.Org Foundation"
[ 5.270] compiled for 1.15.0, module version = 2.8.2
[ 5.270] Module class: X.Org XInput Driver
[ 5.270] ABI class: X.Org XInput driver, version 20.0
[ 5.270] (II) Using input driver 'evdev' for 'Power Button'
[ 5.270] (**) Power Button: always reports core events
[ 5.270] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 5.270] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.270] (--) evdev: Power Button: Found keys
[ 5.270] (II) evdev: Power Button: Configuring as keyboard
[ 5.270] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.270] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.270] (**) Option "xkb_rules" "evdev"
[ 5.270] (**) Option "xkb_model" "pc105"
[ 5.270] (**) Option "xkb_layout" "fr"
[ 5.270] (**) Option "xkb_variant" "latin9"
[ 5.270] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"
[ 5.272] (II) XKB: reuse xkmfile /var/lib/xkb/server-9922EA4DC6824C421F4AB5FB29A746AD10341C54.xkm
[ 5.273] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 5.273] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5.273] (II) Using input driver 'evdev' for 'Video Bus'
[ 5.273] (**) Video Bus: always reports core events
[ 5.273] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 5.273] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 5.273] (--) evdev: Video Bus: Found keys
[ 5.273] (II) evdev: Video Bus: Configuring as keyboard
[ 5.273] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3/event2"
[ 5.273] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.273] (**) Option "xkb_rules" "evdev"
[ 5.273] (**) Option "xkb_model" "pc105"
[ 5.273] (**) Option "xkb_layout" "fr"
[ 5.273] (**) Option "xkb_variant" "latin9"
[ 5.273] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"
[ 5.273] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.273] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.273] (II) Using input driver 'evdev' for 'Power Button'
[ 5.273] (**) Power Button: always reports core events
[ 5.273] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 5.273] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.273] (--) evdev: Power Button: Found keys
[ 5.273] (II) evdev: Power Button: Configuring as keyboard
[ 5.273] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 5.273] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5.273] (**) Option "xkb_rules" "evdev"
[ 5.273] (**) Option "xkb_model" "pc105"
[ 5.274] (**) Option "xkb_layout" "fr"
[ 5.274] (**) Option "xkb_variant" "latin9"
[ 5.274] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"
[ 5.274] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.274] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 5.274] (II) config/udev: Adding input device Mouse (/dev/input/event13)
[ 5.274] (**) Mouse: Applying InputClass "evdev keyboard catchall"
[ 5.274] (II) Using input driver 'evdev' for 'Mouse'
[ 5.274] (**) Mouse: always reports core events
[ 5.274] (**) evdev: Mouse: Device: "/dev/input/event13"
[ 5.274] (--) evdev: Mouse: Vendor 0x1d57 Product 0xac01
[ 5.274] (--) evdev: Mouse: Found keys
[ 5.274] (II) evdev: Mouse: Configuring as keyboard
[ 5.274] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input14/event13"
[ 5.274] (II) XINPUT: Adding extended input device "Mouse" (type: KEYBOARD, id 9)
[ 5.274] (**) Option "xkb_rules" "evdev"
[ 5.274] (**) Option "xkb_model" "pc105"
[ 5.274] (**) Option "xkb_layout" "fr"
[ 5.274] (**) Option "xkb_variant" "latin9"
[ 5.274] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"
[ 5.275] (II) config/udev: Adding input device Mouse (/dev/input/event14)
[ 5.275] (**) Mouse: Applying InputClass "evdev pointer catchall"
[ 5.275] (**) Mouse: Applying InputClass "evdev keyboard catchall"
[ 5.275] (II) Using input driver 'evdev' for 'Mouse'
[ 5.275] (**) Mouse: always reports core events
[ 5.275] (**) evdev: Mouse: Device: "/dev/input/event14"
[ 5.275] (--) evdev: Mouse: Vendor 0x1d57 Product 0xac01
[ 5.275] (--) evdev: Mouse: Found 9 mouse buttons
[ 5.275] (--) evdev: Mouse: Found scroll wheel(s)
[ 5.275] (--) evdev: Mouse: Found relative axes
[ 5.275] (--) evdev: Mouse: Found x and y relative axes
[ 5.275] (--) evdev: Mouse: Found absolute axes
[ 5.275] (II) evdev: Mouse: Forcing absolute x/y axes to exist.
[ 5.275] (--) evdev: Mouse: Found keys
[ 5.275] (II) evdev: Mouse: Configuring as mouse
[ 5.275] (II) evdev: Mouse: Configuring as keyboard
[ 5.275] (II) evdev: Mouse: Adding scrollwheel support
[ 5.275] (**) evdev: Mouse: YAxisMapping: buttons 4 and 5
[ 5.275] (**) evdev: Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.275] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input15/event14"
[ 5.275] (II) XINPUT: Adding extended input device "Mouse" (type: KEYBOARD, id 10)
[ 5.275] (**) Option "xkb_rules" "evdev"
[ 5.275] (**) Option "xkb_model" "pc105"
[ 5.275] (**) Option "xkb_layout" "fr"
[ 5.275] (**) Option "xkb_variant" "latin9"
[ 5.275] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"
[ 5.275] (II) evdev: Mouse: initialized for relative axes.
[ 5.275] (WW) evdev: Mouse: ignoring absolute axes.
[ 5.275] (**) Mouse: (accel) keeping acceleration scheme 1
[ 5.275] (**) Mouse: (accel) acceleration profile 0
[ 5.275] (**) Mouse: (accel) acceleration factor: 2.000
[ 5.275] (**) Mouse: (accel) acceleration threshold: 4
[ 5.276] (II) config/udev: Adding input device Mouse (/dev/input/mouse0)
[ 5.276] (II) No input driver specified, ignoring this device.
[ 5.276] (II) This device may have been added with another device file.
[ 5.276] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event6)
[ 5.276] (II) No input driver specified, ignoring this device.
[ 5.276] (II) This device may have been added with another device file.
[ 5.276] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 5.276] (II) No input driver specified, ignoring this device.
[ 5.276] (II) This device may have been added with another device file.
[ 5.276] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event4)
[ 5.276] (II) No input driver specified, ignoring this device.
[ 5.276] (II) This device may have been added with another device file.
[ 5.276] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event3)
[ 5.276] (II) No input driver specified, ignoring this device.
[ 5.276] (II) This device may have been added with another device file.
[ 5.277] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event12)
[ 5.277] (II) No input driver specified, ignoring this device.
[ 5.277] (II) This device may have been added with another device file.
[ 5.277] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 5.277] (II) No input driver specified, ignoring this device.
[ 5.277] (II) This device may have been added with another device file.
[ 5.277] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 5.277] (II) No input driver specified, ignoring this device.
[ 5.277] (II) This device may have been added with another device file.
[ 5.277] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 5.277] (II) No input driver specified, ignoring this device.
[ 5.277] (II) This device may have been added with another device file.
[ 5.277] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[ 5.277] (II) No input driver specified, ignoring this device.
[ 5.277] (II) This device may have been added with another device file.
[ 5.278] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event7)
[ 5.278] (II) No input driver specified, ignoring this device.
[ 5.278] (II) This device may have been added with another device file.
[ 5.278] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event15)
[ 5.278] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 5.278] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 5.278] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 5.278] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 5.278] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event15"
[ 5.278] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 5.278] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 5.278] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 5.278] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 5.278] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found x and y relative axes
[ 5.278] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found absolute axes
[ 5.278] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Forcing absolute x/y axes to exist.
[ 5.278] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found keys
[ 5.278] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as mouse
[ 5.278] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as keyboard
[ 5.278] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Adding scrollwheel support
[ 5.278] (**) evdev: Logitech Unifying Device. Wireless PID:4024: YAxisMapping: buttons 4 and 5
[ 5.278] (**) evdev: Logitech Unifying Device. Wireless PID:4024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.278] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0005/input/input16/event15"
[ 5.278] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4024" (type: KEYBOARD, id 11)
[ 5.278] (**) Option "xkb_rules" "evdev"
[ 5.278] (**) Option "xkb_model" "pc105"
[ 5.278] (**) Option "xkb_layout" "fr"
[ 5.278] (**) Option "xkb_variant" "latin9"
[ 5.278] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"
[ 5.278] (II) evdev: Logitech Unifying Device. Wireless PID:4024: initialized for relative axes.
[ 5.278] (WW) evdev: Logitech Unifying Device. Wireless PID:4024: ignoring absolute axes.
[ 5.278] (**) Logitech Unifying Device. Wireless PID:4024: (accel) keeping acceleration scheme 1
[ 5.278] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration profile 0
[ 5.278] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration factor: 2.000
[ 5.278] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration threshold: 4
[ 5.279] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 5.279] (II) No input driver specified, ignoring this device.
[ 5.279] (II) This device may have been added with another device file.
[ 6.069] (II) intel(0): EDID vendor "GSM", prod id 1
[ 6.069] (II) intel(0): Using EDID range info for horizontal sync
[ 6.069] (II) intel(0): Using EDID range info for vertical refresh
[ 6.069] (II) intel(0): Printing DDC gathered Modelines:
[ 6.069] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 6.069] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.069] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 6.069] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1526 1664 720 725 730 746 +hsync -vsync (44.6 kHz e)
[ 6.069] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.069] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.069] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6.069] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.069] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 6.069] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.069] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 6.069] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 6.069] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 6.069] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 6.069] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 6.069] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.069] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.069] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 6.069] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 6.069] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[ 6.069] (II) intel(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)Dernière modification par broussaille (Le 28/07/2014, à 15:13)
Hors ligne
#2 Le 28/07/2014, à 00:15
- broussaille
Re : Perte du signal HDMI après zapping télé ou mise en veille, intel i915
Le probleme vient peut-être de la config de xrandr.
Le port HDMI est toujours désigné comme "HDMI2". Peut-être que quand on débranche, la carte graphique bascule sur une autre sortie. Mais dans les paramètres d'affichage, j'ai bien coché "configurer les nouveaux écrans lorsqu'ils sont connectés", ça devrait retrouvé le HDMI qd il est rebranché?
edit : "HDMI1" C'est le port DVI, mais en branchant dessu (cable DVI/HDMI)), ça ne change rien au problème...
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm
1920x1080 60.0*+ 50.0 59.9 30.0 25.0 24.0 30.0 24.0
1920x1080i 60.1 50.0 60.0
1280x1024 60.0
1360x768 60.0
1152x864 60.0
1280x720 59.8 60.0 50.0 59.9
1440x576i 50.1
1024x768 60.0
800x600 60.3
720x576 50.0
720x480 60.0 59.9
640x480 60.0 59.9 59.9
720x400 70.1
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)Un anglophone semble avoir eu le même problème (et l'explique mieux)... mais sans solution ici :ubuntu en anglais
Dernière modification par broussaille (Le 28/07/2014, à 12:57)
Hors ligne
#3 Le 28/07/2014, à 14:06
- broussaille
Re : Perte du signal HDMI après zapping télé ou mise en veille, intel i915
Bon, j'ai tenté
- d'installer les derniers drivers grâce au dépôt oibaf ... rien
- de mettre un kernel plus récent 3.16 ... rien
La méthode proposée sur le forum anglais me permet déjà de ne pas redémarrer sauvagement l'ordi :
1/ devant l'écran noir, lancer une console ctrl+alt+F2 (tty1 veut pas??)
2/ se loguer
3/ sudo restart lightdm
Pas très user friendly... ça va grincer des dents je sens... mais bon, en attendant mieux...
Si vous avez une idée magique, je reste preneur. 
Par exemple, forcer le système à vérifier la présence d'un écran sur le port HDMI1 toutes les x secondes qd il n'y a plus de signal... Mais là, ça dépasse mes compétences de très loin...
Hors ligne