#1 Le 21/08/2014, à 08:11
- olivrouen
pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
bonjour,
Voici donc un nouveau fil, merci Slystone pour l'explication (je pensais au contraire qu'il fallait éviter de créer trop de nouvelles discussions sur des problèmes similaires)
J'ai validé il y a deux jours la mise à niveau pour passer à la version 14.04 et depuis, linux plante au démarrage.
A savoir, je suis en dualboot avec windows XP que je n'utilise plus depuis longtemps et linux est choisi par défaut au démarrage, mais maintenant écran noir.
j'ai donc essayé en redémarrant et en allant ds les options ou j'ai le choix entre :
ubuntu avec linux :
3.13.0-35-generic
3.13.0-34-g
3.13.0-33-g
3.2.0-67-g qui est le seul qui me permet de démarrer.
que puis je faire pour changer cela? Est-ce un problème d'utiliser ce noyau? (cela modifie certain de mes logiciels installés)
merci d'avance!
Hors ligne
#2 Le 21/08/2014, à 10:39
- malbo
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
les noyaux 3.13.0-XX sont des noyaux de Ubuntu 14.04 alors que le noyau 3.2.0-XX est un noyau de l'ancienne installation Ubuntu 12.04. Peut-être que Ubuntu 14.04 a un bug avec ton matériel. Pour le savoir, je te suggère de réaliser un support live de Ubuntu 14.04.1 et de faire un essai en session live (Essayer Ubuntu sans l'installer) pour savoir si ça se passe bien, sans pb d'affichage.
Si ça se passe mal, c'est normal que ton Ubuntu mis à niveau soit défectueux : il y a peut-être un bug de Ubuntu 14.04 dans ton ordi.
Mais si ça se passe bien en session live, ça veut dire que ton Ubuntu mis à jour est plombé par des réglages et autres bidouilles qui marchaient bien avec l'ancienne version mais qui sont néfastes pour la nouvelle. C'est peut-être pas dur à réparer ou c'est peut-être une galère. Le fait que ça se passe bien en session live est quand même un gros encouragement. J'espère que c'est ce que tu vas obtenir.
Dernière modification par malbo (Le 21/08/2014, à 10:45)
Hors ligne
#3 Le 25/08/2014, à 14:13
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
merci bien malbo pour ton aide,
j'ai mis du temps à pourvoir appliquer tes conseils:
-impossible de graver un live cd car mon disque vierge s'éjecte tt seul dès que je lance le gravage
-j'ai mis du temps à comprendre qu'il fallait utiliser l'outil usb-creator (créateur de disque de démarrage sur mon ordi) pour faire une live usb
-l'ordi ne la détectait pas tout seul au démarrage jusqu'à un énième essai ou j'ai fait F12 au démarrage pour choisir USB-ZIP et la j'ai pu démarrer en faisant un essai de la version 14.04
résultat, pas de problème apparent, mais je n'ai rien fait d'exceptionnel : j'ai ouvert libre office, mozilla, des dossiers, rythmnbox...
voilà ou j'en suis!
Hors ligne
#4 Le 25/08/2014, à 15:38
- malbo
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
démarre sur un ancien noyau, passe cette commande dans un terminal :
cat /etc/X11/xorg.conf
et poste le résultat ici
Hors ligne
#5 Le 25/08/2014, à 15:50
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
par ancien noyau j'ai compris avec le 3.2.0-67-generic qui est le seul qui me permet de démarrer.
voici donc...
olivier@olivier-desktop:~$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type
Hors ligne
#6 Le 25/08/2014, à 16:34
- malbo
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Bon ben là je suis sec. J’imaginais que tu avais installé un pilote graphique dans ton install précédente et que c'était la raison pour laquelle ton Ubuntu migré ne voulait fonctionner qu'avec ton ancien noyau mais le résultat que tu as posté montre que tu n'avais pas de pilote propriétaire...
Dernière modification par malbo (Le 25/08/2014, à 16:46)
Hors ligne
#7 Le 25/08/2014, à 17:27
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
hola, faut pas me lâcher comme ça!!!! PLEASE!
J'ai regardé ce que c'était que cette commande que tu m'as fait exécuter.
J'ai eu des problèmes avec les pilotes de ma carte graphique (NVIDIA Corporation G73 [GeForce 7600 GT] (rev a1)). Ayant du mal à lire les videos, un ami m'avait changé le pilote et j'ai eu encore plus de galère après alors j'ai réinstallé un autre pilote il me semble. Cela avait fonctionné (aujourd'hui, je n'arrive plus du tout à lire les DVD en tt cas...)
Donc, au cas ou, voici mes pilotes de carte graphique:
utilisé: NVIDIA legacy binary driver - version 173.14.39 depuis nvidia-173 (propriétaire)
autres: - NVIDIA legacy binary driver - version 304.117 depuis nvidia-304 (propriétaire, testé)
- NVIDIA legacy binary driver - version 304.117 depuis nvidia-304 (propriétaire)
- serveur XX.org - pilote d'affichage Nouveau depuis xserver-xorg-video-nouveau (libre)
Si ce n'est pas ça, y-a-t-il qqchose d'autre à faire/tester?
Hors ligne
#8 Le 25/08/2014, à 17:52
- malbo
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Je n'y connais rien en carte graphique mais à mon avis, il faut désinstaller tous ces pilotes propriétaires puisque ton essai en session live montre que le pilote libre Nouveau gère bien ta carte graphique. Si personne ne sait t'indiquer ici les commandes qui vont bien pour purger tous ces pilotes, poste dans le forum "Affichage et cartes graphiques" pour demander de l'aide.
Hors ligne
#9 Le 25/08/2014, à 18:00
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
puisque ton essai en session live montre que le pilote libre Nouveau gère bien ta carte graphique
tu veux dire que lorsque j'ai utilisé la live session, c'est le pilote libre qui était utilisé?
ok pour aller voir l'autre forum, mais ne pourrais je pas tenter de refaire une mise à jour de la version 14.04? Pourquoi ubuntu refuse de se lancer avec les noyaux de la version 14.04 et ne peut le faire qu'avec un ancien? Ce pbl là ne sera toujours pas résolu...
Hors ligne
#10 Le 25/08/2014, à 19:40
- malbo
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
ok pour aller voir l'autre forum, mais ne pourrais je pas tenter de refaire une mise à jour de la version 14.04?
Peux-tu expliquer ce que tu veux dire par "tenter de refaire une mise à jour de la version 14.04" (détaille les opérations que ça implique)?
Hors ligne
#11 Le 25/08/2014, à 20:30
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Je n'ai pas vraiment d'idée précise mais je pourrais tenter de désinstaller et réinstaller ubuntu.
Le fait que je sois en dual windowsxp/ubuntu ne peut-il pas aussi poser problème? Ça ne me dérangerai pas de virer XP pour de bon pour garder uniquement ubuntu.
je ne me vois pas fonctionner avec l'ancien pilote pendant longtemps, car hormis certains pgm qui sont "revenus" à des versions anciennes, j'ai beaucoup de bugs (freeze, fermeture de fenêtres, ...)
Hors ligne
#12 Le 26/08/2014, à 04:52
- malbo
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Pour que je puisse mieux comprendre ton install actuelle, peux-tu démarrer ton ordi en session live (choix Essayer Ubuntu) sur ta liveUSB Ubuntu 14.04 et faire un Boot-Info suivant cette procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Tu donneras l'URL du Boot-Info dans ta réponse (ne fais pas la "Réparation recommandée" de Boot-Repair parce que ça ne peut pas réparer le pb graphique que tu as)
Hors ligne
#13 Le 26/08/2014, à 13:58
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
et voila c est fait
http://paste.ubuntu.com/8149699/
dites moi tout docteur...
Hors ligne
#14 Le 26/08/2014, à 17:05
- malbo
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
=> Windows 2000/XP/2003 is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 2823808 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders, total 320173056 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 81,920,159 81,920,097 7 NTFS / exFAT / HPFS
/dev/sda2 81,920,160 200,702,879 118,782,720 7 NTFS / exFAT / HPFS
/dev/sda3 200,702,880 260,942,073 60,239,194 7 NTFS / exFAT / HPFS
/dev/sda4 260,943,870 320,172,031 59,228,162 5 Extended
/dev/sda5 260,943,872 317,636,607 56,692,736 83 Linux
/dev/sda6 317,638,656 320,172,031 2,533,376 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 63 133,114,589 133,114,527 7 NTFS / exFAT / HPFS
/dev/sdb2 133,116,480 234,435,599 101,319,120 7 NTFS / exFAT / HPFS
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 2004 MB, 2004877312 bytes
76 heads, 11 sectors/track, 4683 cylinders, total 3915776 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 32 3,915,775 3,915,744 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 E840057640054CAE ntfs
/dev/sda2 680062270061FC86 ntfs Personnel
/dev/sda3 9CD079E5D079C5D4 ntfs Data
/dev/sda5 5b747d63-98a8-48a1-b557-8617706abecd ext4
/dev/sda6 2147765e-8e21-436e-9b62-e2234b4d42b5 swap
/dev/sdb1 C4106D62106D5C84 ntfs film
/dev/sdb2 EE24427324423F39 ntfs films (2)
/dev/sdc1 F327-3275 vfat USB DISK
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
================================ sda1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=2
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /fastdetect /NoExecute=OptIn /usepmtimer
--------------------------------------------------------------------------------
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
linux /boot/vmlinuz-3.13.0-35-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-35-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
menuentry 'Ubuntu, avec Linux 3.13.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-35-generic-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
echo 'Chargement de Linux 3.13.0-35-generic…'
linux /boot/vmlinuz-3.13.0-35-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-35-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-35-generic-recovery-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
echo 'Chargement de Linux 3.13.0-35-generic…'
linux /boot/vmlinuz-3.13.0-35-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-35-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
echo 'Chargement de Linux 3.13.0-34-generic…'
linux /boot/vmlinuz-3.13.0-34-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-34-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-recovery-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
echo 'Chargement de Linux 3.13.0-34-generic…'
linux /boot/vmlinuz-3.13.0-34-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-34-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-33-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-33-generic-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
echo 'Chargement de Linux 3.13.0-33-generic…'
linux /boot/vmlinuz-3.13.0-33-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-33-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-33-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-33-generic-recovery-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
echo 'Chargement de Linux 3.13.0-33-generic…'
linux /boot/vmlinuz-3.13.0-33-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-33-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-67-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-67-generic-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
echo 'Chargement de Linux 3.2.0-67-generic…'
linux /boot/vmlinuz-3.2.0-67-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.2.0-67-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-67-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-67-generic-recovery-5b747d63-98a8-48a1-b557-8617706abecd' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
echo 'Chargement de Linux 3.2.0-67-generic…'
linux /boot/vmlinuz-3.2.0-67-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.2.0-67-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 5b747d63-98a8-48a1-b557-8617706abecd
else
search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Microsoft Windows XP Professionnel (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-E840057640054CAE' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 E840057640054CAE
else
search --no-floppy --fs-uuid --set=root E840057640054CAE
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=5b747d63-98a8-48a1-b557-8617706abecd / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=2147765e-8e21-436e-9b62-e2234b4d42b5 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda4
00000000 58 70 2b 9d 78 28 b7 da c9 e6 7a 87 d0 a2 be 75 |Xp+.x(....z....u|
00000010 d7 ad 4b d8 c0 56 40 df 0f 34 af 61 a7 34 a7 5d |..K..V@..4.a.4.]|
00000020 5c 93 7b d0 b3 dd 3a 57 fb bc 8a f4 b4 45 b3 c6 |\.{...:W.....E..|
00000030 0f ab 2e c7 e8 44 33 57 d7 1e af 26 6c 83 3c 6a |.....D3W...&l.<j|
00000040 f0 be e7 af 5b c7 02 00 ff f6 ff 25 6b af a7 88 |....[......%k...|
00000050 c9 59 3e ce fd 21 ab 41 9b b4 86 97 4e 42 d4 8f |.Y>..!.A....NB..|
00000060 ee 6d 45 08 06 72 ac 17 d5 95 bb f9 85 f8 b4 d7 |.mE..r..........|
00000070 db 90 48 fd ad 5f e8 ce aa bb e5 76 b7 f2 ce e0 |..H.._.....v....|
00000080 c0 98 8f df 02 c9 1f f9 87 84 92 e9 3d df f7 d3 |............=...|
00000090 1c 06 6a 83 21 4f 5f e9 95 be 91 79 72 3b e0 52 |..j.!O_....yr;.R|
000000a0 a6 7e 1b 3e e1 9b ef 8d 69 ef 3e 9a 37 e9 a7 1e |.~.>....i.>.7...|
000000b0 43 ce 1e 1d 91 1c 7a d9 d7 04 04 29 06 b9 ce 15 |C.....z....)....|
000000c0 9b 73 81 17 55 0e 0a fd 55 bb 91 12 57 47 9c 02 |.s..U...U...WG..|
000000d0 9a 58 28 08 1b b7 ca 2a 84 f6 27 22 22 1f ff 3f |.X(....*..'""..?|
000000e0 22 73 42 c8 e7 a7 a5 8d c3 59 d0 ae e9 c5 6b b1 |"sB......Y....k.|
000000f0 b3 b1 07 47 2b 9b 20 ed 7f 22 49 20 47 2f 39 11 |...G+. .."I G/9.|
00000100 39 cc 89 75 cc 8e 4a a5 a8 8f 5a f0 dc 4e 93 55 |9..u..J...Z..N.U|
00000110 35 4d 4e 57 ee 3e 1d f5 a5 ac 4e da 03 93 f7 1d |5MNW.>....N.....|
00000120 12 73 56 ac 11 fb a3 69 da 85 a8 40 61 5c 27 28 |.sV....i...@a\'(|
00000130 5c c1 1b ba a6 08 e2 b2 de 18 61 ad 75 09 5b 68 |\.........a.u.[h|
00000140 2e 76 27 93 1b d8 de ea fa ac 54 52 f7 b5 a2 71 |.v'.......TR...q|
00000150 1a d7 9f 99 4e bd e4 36 e4 f8 b0 fc 72 cd ca f0 |....N..6....r...|
00000160 52 86 24 2e 84 ab 0f a4 26 e8 d1 e0 86 86 76 cc |R.$.....&.....v.|
00000170 54 9d 3a 21 99 8d 15 bd 94 43 db b9 e8 d0 65 5a |T.:!.....C....eZ|
00000180 98 bf 68 b8 8a 8f dd 5f 47 95 3a b3 aa 13 19 aa |..h...._G.:.....|
00000190 e9 5b c0 a5 e1 f8 4e b4 46 b4 22 8d d3 ec 1f 7b |.[....N.F."....{|
000001a0 89 38 2c 9e 43 b8 21 15 bd 51 ec 7b 97 cf 7b c3 |.8,.C.!..Q.{..{.|
000001b0 51 f6 f7 c7 6e e7 8a 26 e7 30 33 73 9c 0a 00 fe |Q...n..&.03s....|
000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 61 03 00 fe |............a...|
000001d0 ff ff 05 fe ff ff 3e 12 61 03 c4 ad 26 00 00 00 |......>.a...&...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
cat: /tmp/BootInfo-gu89rAxc/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-gu89rAxc/Tmp_Log: No such file or directory
File descriptor 9 (/proc/6311/mounts) leaked on lvscan invocation. Parent PID 17291: bash
File descriptor 63 (pipe:[106865]) leaked on lvscan invocation. Parent PID 17291: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-26__12h48 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
=================== os-prober:
/dev/sda1:Microsoft Windows XP Professionnel:Windows:chain
/dev/sda5:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="E840057640054CAE" TYPE="ntfs"
/dev/sda2: LABEL="Personnel" UUID="680062270061FC86" TYPE="ntfs"
/dev/sda3: LABEL="Data" UUID="9CD079E5D079C5D4" TYPE="ntfs"
/dev/sda5: UUID="5b747d63-98a8-48a1-b557-8617706abecd" TYPE="ext4"
/dev/sda6: UUID="2147765e-8e21-436e-9b62-e2234b4d42b5" TYPE="swap"
/dev/sdb1: LABEL="film" UUID="C4106D62106D5C84" TYPE="ntfs"
/dev/sdb2: LABEL="films (2)" UUID="EE24427324423F39" TYPE="ntfs"
/dev/sdc1: LABEL="USB DISK" UUID="F327-3275" TYPE="vfat"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda5/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 13 15:53 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 19:01 00_header
-rwxr-xr-x 1 root root 6058 mai 8 12:08 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 19:01 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 19:01 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 12:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 19:01 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 19:01 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 6 2010 40_custom
-rwxr-xr-x 1 root root 216 mai 15 19:01 41_custom
-rw-r--r-- 1 root root 483 oct. 6 2010 README
=================== sda5/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, ntldr, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3.
sda5 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb2.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 63 sectors * 512 bytes
=================== parted -l:
Model: ATA Maxtor 6L160P0 (scsi)
Disk /dev/sda: 164GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 41.9GB 41.9GB primary ntfs boot
2 41.9GB 103GB 60.8GB primary ntfs
3 103GB 134GB 30.8GB primary ntfs
4 134GB 164GB 30.3GB extended
5 134GB 163GB 29.0GB logical ext4
6 163GB 164GB 1297MB logical linux-swap(v1)
Model: ATA ST3120026A (scsi)
Disk /dev/sdb: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 68.2GB 68.2GB primary ntfs
2 68.2GB 120GB 51.9GB primary ntfs
Model: USB Flash Disk (scsi)
Disk /dev/sdc: 2005MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 16.4kB 2005MB 2005MB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:164GB:scsi:512:512:msdos:ATA Maxtor 6L160P0;
1:32.3kB:41.9GB:41.9GB:ntfs::boot;
2:41.9GB:103GB:60.8GB:ntfs::;
3:103GB:134GB:30.8GB:ntfs::;
4:134GB:164GB:30.3GB:::;
5:134GB:163GB:29.0GB:ext4::;
6:163GB:164GB:1297MB:linux-swap(v1)::;
BYT;
/dev/sdb:120GB:scsi:512:512:msdos:ATA ST3120026A;
1:32.3kB:68.2GB:68.2GB:ntfs::;
2:68.2GB:120GB:51.9GB:ntfs::;
BYT;
/dev/sdc:2005MB:scsi:512:512:msdos:USB Flash Disk;
1:16.4kB:2005MB:2005MB:fat32::boot, lba;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr1 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg log lp0 mapper mcelog mem net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sdb sdb1 sdb2 sdc sdc1 sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 sr1 stderr stdin stdout uhid uinput urandom vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 f0 00 3f 00 00 00 |........?...?...|
00000020 00 00 00 00 80 00 80 00 60 00 e2 04 00 00 00 00 |........`.......|
00000030 00 00 0c 00 00 00 00 00 06 20 4e 00 00 00 00 00 |......... N.....|
00000040 f6 00 00 00 01 00 00 00 ae 4c 05 40 76 05 40 e8 |.........L.@v.@.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 45 72 72 2e 20 6c 65 63 74 75 72 |.....Err. lectur|
00000190 65 20 64 69 73 71 75 65 00 0d 0a 4e 54 4c 44 52 |e disque...NTLDR|
000001a0 20 6d 61 6e 71 75 65 00 0d 0a 4e 54 4c 44 52 20 | manque...NTLDR |
000001b0 65 73 74 20 63 6f 6d 70 72 65 73 73 82 00 0d 0a |est compress....|
000001c0 45 6e 74 72 65 7a 20 43 74 72 6c 2b 41 6c 74 2b |Entrez Ctrl+Alt+|
000001d0 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 6d |Suppr pour red.m|
000001e0 61 72 72 65 72 0d 0a 00 0d 0a 00 00 00 00 00 00 |arrer...........|
000001f0 00 00 00 00 00 00 00 00 83 99 a8 be 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 f0 00 a0 00 e2 04 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 7a 14 07 00 00 00 00 |.........z......|
00000030 00 00 0c 00 00 00 00 00 af 47 71 00 00 00 00 00 |.........Gq.....|
00000040 f6 00 00 00 01 00 00 00 86 fc 61 00 27 62 00 68 |..........a.'b.h|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 45 72 72 2e 20 6c 65 63 74 75 72 |.....Err. lectur|
00000190 65 20 64 69 73 71 75 65 00 0d 0a 4e 54 4c 44 52 |e disque...NTLDR|
000001a0 20 6d 61 6e 71 75 65 00 0d 0a 4e 54 4c 44 52 20 | manque...NTLDR |
000001b0 65 73 74 20 63 6f 6d 70 72 65 73 73 82 00 0d 0a |est compress....|
000001c0 45 6e 74 72 65 7a 20 43 74 72 6c 2b 41 6c 74 2b |Entrez Ctrl+Alt+|
000001d0 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 6d |Suppr pour red.m|
000001e0 61 72 72 65 72 0d 0a 00 0d 0a 00 00 00 00 00 00 |arrer...........|
000001f0 00 00 00 00 00 00 00 00 83 99 a8 be 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 f0 00 a0 7b f6 0b |........?....{..|
00000020 00 00 00 00 80 00 80 00 50 2d 97 03 00 00 00 00 |........P-......|
00000030 00 00 0c 00 00 00 00 00 cc ed 71 00 00 00 00 00 |..........q.....|
00000040 f6 00 00 00 01 00 00 00 d4 c5 79 d0 e5 79 d0 9c |..........y..y..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 45 72 72 2e 20 6c 65 63 74 75 72 |.....Err. lectur|
00000190 65 20 64 69 73 71 75 65 00 0d 0a 4e 54 4c 44 52 |e disque...NTLDR|
000001a0 20 6d 61 6e 71 75 65 00 0d 0a 4e 54 4c 44 52 20 | manque...NTLDR |
000001b0 65 73 74 20 63 6f 6d 70 72 65 73 73 82 00 0d 0a |est compress....|
000001c0 45 6e 74 72 65 7a 20 43 74 72 6c 2b 41 6c 74 2b |Entrez Ctrl+Alt+|
000001d0 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 6d |Suppr pour red.m|
000001e0 61 72 72 65 72 0d 0a 00 0d 0a 00 00 00 00 00 00 |arrer...........|
000001f0 00 00 00 00 00 00 00 00 83 99 a8 be 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 |........?...?...|
00000020 00 00 00 00 80 00 80 00 9e 2a ef 07 00 00 00 00 |.........*......|
00000030 00 00 0c 00 00 00 00 00 a9 f2 7e 00 00 00 00 00 |..........~.....|
00000040 f6 00 00 00 01 00 00 00 84 5c 6d 10 62 6d 10 c4 |.........m.bm..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 45 72 72 2e 20 6c 65 63 74 75 72 |.....Err. lectur|
00000190 65 20 64 69 73 71 75 65 00 0d 0a 4e 54 4c 44 52 |e disque...NTLDR|
000001a0 20 6d 61 6e 71 75 65 00 0d 0a 4e 54 4c 44 52 20 | manque...NTLDR |
000001b0 65 73 74 20 63 6f 6d 70 72 65 73 73 82 00 0d 0a |est compress....|
000001c0 45 6e 74 72 65 7a 20 43 74 72 6c 2b 41 6c 74 2b |Entrez Ctrl+Alt+|
000001d0 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 6d |Suppr pour red.m|
000001e0 61 72 72 65 72 0d 0a 00 0d 0a 00 00 00 00 00 00 |arrer...........|
000001f0 00 00 00 00 00 00 00 00 83 99 a8 be 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 40 32 ef 07 |........?...@2..|
00000020 00 00 00 00 80 00 80 00 cf 01 0a 06 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 1c a0 60 00 00 00 00 00 |..........`.....|
00000040 f6 00 00 00 01 00 00 00 39 3f 42 24 73 42 24 ee |........9?B$sB$.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 45 72 72 2e 20 6c 65 63 74 75 72 |.....Err. lectur|
00000190 65 20 64 69 73 71 75 65 00 0d 0a 4e 54 4c 44 52 |e disque...NTLDR|
000001a0 20 6d 61 6e 71 75 65 00 0d 0a 4e 54 4c 44 52 20 | manque...NTLDR |
000001b0 65 73 74 20 63 6f 6d 70 72 65 73 73 82 00 0d 0a |est compress....|
000001c0 45 6e 74 72 65 7a 20 43 74 72 6c 2b 41 6c 74 2b |Entrez Ctrl+Alt+|
000001d0 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 6d |Suppr pour red.m|
000001e0 61 72 72 65 72 0d 0a 00 0d 0a 00 00 00 00 00 00 |arrer...........|
000001f0 00 00 00 00 00 00 00 00 83 99 a8 be 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1008M 120M 888M 12% /
udev devtmpfs 998M 12K 998M 1% /dev
tmpfs tmpfs 202M 1.2M 201M 1% /run
/dev/sdc1 vfat 1.9G 987M 922M 52% /cdrom
/dev/loop0 squashfs 952M 952M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1008M 60K 1008M 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 1008M 80K 1008M 1% /run/shm
none tmpfs 100M 60K 100M 1% /run/user
/dev/sda1 fuseblk 40G 35G 4.6G 89% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 57G 35G 22G 62% /mnt/boot-sav/sda2
/dev/sda3 fuseblk 29G 23G 6.2G 79% /mnt/boot-sav/sda3
/dev/sda5 ext4 27G 14G 12G 55% /mnt/boot-sav/sda5
/dev/sdb1 fuseblk 64G 11G 53G 17% /mnt/boot-sav/sdb1
/dev/sdb2 fuseblk 49G 20G 29G 42% /mnt/boot-sav/sdb2
=================== fdisk -l:
Disk /dev/sda: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders, total 320173056 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xa6d8a6d8
Device Boot Start End Blocks Id System
/dev/sda1 * 63 81920159 40960048+ 7 HPFS/NTFS/exFAT
/dev/sda2 81920160 200702879 59391360 7 HPFS/NTFS/exFAT
/dev/sda3 200702880 260942073 30119597 7 HPFS/NTFS/exFAT
/dev/sda4 260943870 320172031 29614081 5 Extended
/dev/sda5 260943872 317636607 28346368 83 Linux
/dev/sda6 317638656 320172031 1266688 82 Linux swap / Solaris
Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x46424bc8
Device Boot Start End Blocks Id System
/dev/sdb1 63 133114589 66557263+ 7 HPFS/NTFS/exFAT
/dev/sdb2 133116480 234435599 50659560 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 2004 MB, 2004877312 bytes
76 heads, 11 sectors/track, 4683 cylinders, total 3915776 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00047883
Device Boot Start End Blocks Id System
/dev/sdc1 * 32 3915775 1957872 c W95 FAT32 (LBA)
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (164GB) !
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda5 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sdb2.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
Si tu veux virer XP, ça vaut le coup de faire une installation toute neuve de Ubuntu mais auparavant, il faudra stocker sur disque dur externe les données précieuses que tu peux avoir sur le disque dur. C'est seulement quand ces données seront sauvegardées que tu pourras faire cette install. Tu peux faire une installation automatique de Ubuntu à mon avis (du genre supprimer tout et réinstaller)
Hors ligne
#15 Le 26/08/2014, à 17:59
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
ok, c'est noté, j'avais déjà tout stocké sur un disque externe au vue de ces derniers temps...
et par rapport au boot info? Y a-t-il des infos importantes, des choses à modifier?
Hors ligne
#16 Le 26/08/2014, à 18:46
- nam1962
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Combien as tu de RAM ?
[ Modéré ]
Hors ligne
#17 Le 27/08/2014, à 05:16
- malbo
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
et par rapport au boot info? Y a-t-il des infos importantes, des choses à modifier?
Le boot-Info, c'était pour voir s'il n'y avait pas une anomalie quelconque qui aurait pu t’empêcher de réaménager ton disque dur. Il n'y en a pas et c'est pour ça que je t'ai conseillé de faire une installation automatique de Ubuntu qui pourra écraser tout le partitionnement actuel et le remplacer par un partitionnement créé automatiquement par l'installateur : une partition racine + une partition étendue contenant une partition logique swap. Pour éviter les accidents, le jour où tu fais l'installation, ne laisse pas connecté un disque dur externe parce que l'installateur de Ubuntu pourrait se tromper de disque dur...
Dernière modification par malbo (Le 27/08/2014, à 05:18)
Hors ligne
#18 Le 27/08/2014, à 05:40
- F50
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Salut,
Pour commencer, juste après le BIOS, presse une lettre du clavier répétitivement jusqu'à ce que le menu grub apparaisse puis la lettre e, ensuite navigue jusqu'à la ligne :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
Ensuite, enlève quiet et splash et reboot pour voir (note le) et nous dire sur quoi ce noyau bloque.
#19 Le 27/08/2014, à 09:50
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Merci à tous de vos réponses / questions
malbo: merci pour les précisions, j'avais vu
Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda5 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sdb2.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
et je pensais donc qu'il y avait des choses a modifier.
je vais voir comment faire pour envisager une installation automatique de Ubuntu. Le fait que cela pourra
écraser tout le partitionnement actuel et le remplacer par un partitionnement créé automatiquement par l'installateur : une partition racine + une partition étendue contenant une partition logique swap
ça se fera tout seul ou il faut que je gère tout ça?
Nam1962:
pour la ram, j'ai 2,0 Gio (paramètre système/détail/résumé/mémoire, si c'est bien ça!)
donc, il me semblait que ça ne posait pas de pbl pour 14.04
fcn50:
j'ai voulu essayer ta manip, mais n'étant pas certain de comprendre, je voulais te demander des précisions avant de faire n'importe quoi!
-je ne passe pas par le bios il me semble car j'arrive directement sur GRUB version 2.02-beta2-9 exactement comment ici : http://doc.ubuntu-fr.org/grub-pc (avec windows xp en plus)
- j'ai donc fait "e"
-je n'ai pas la ligne que tu as indiqué (GRUB_CMDLINE_LINUX_DEFAULT="quiet splash") mais en 2 dernières lignes:
-linux /boot/vmlinuz-3.13.0-35-generic root=UUID=sb747d63-98a8-48a1-b557-8617706abecd ro quiet splash svt.hand off
-initrd /boot/intrd.img-3.13.0-35-generic
ai-je juste à retirer quiet et splash dans l'avant dernière ligne?
et reboot pour voir (note le) et nous dire sur quoi ce noyau bloque.
que dois je noter exactement? c'est une fenetre d'erreur qui s'ouvrira?
merci encore à tous.
Hors ligne
#20 Le 27/08/2014, à 10:17
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
et suite à la lecture d'autres discussion dans le forum, je me dis que les infos suivantes peuvent peu être aidées?
- dans GRUB, quand je choisi la 1ère ligne "ubuntu" (qui charge donc sur le noyau 3.13.0-35 generic si je comprends bien), ubuntu charge puis page noire avec 3 lignes:
- starting lightDM display manager [OK]
- stopping send an eent to indicate plymouth is up [OK]
puis au bout de 1 minute
- stopping read required files in advance [OK]
puis plus rien alors je relance.
- et aussi, qd je démarre en choisissant le noyau 3.2.0-67 et que j'arrive donc à démarrer linux, le message d'erreur apparaît:
erreur interne "usr/bin/Xorg"
et une fenetre s'ouvre me demandant si je veux bien créer un "NVIDIA report bug file"
voila voila!
Hors ligne
#21 Le 29/08/2014, à 20:07
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
euh, ai-je dit quelque chose d'interdit?
Hors ligne
#22 Le 29/08/2014, à 20:18
- F50
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Ok, alors enlève le quiet et splash de la ligne que tu as puis reprends le boot et note où il bloque, ce seront des messages du noyau sans ouverture d'une autre fenêtre.
#23 Le 29/08/2014, à 20:57
- olivrouen
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
bon, je viens d'essayer.
qd je lance mon ordi j'arrive sur grub et la 1ère ligne "ubuntu" (qui lance ubuntu avec les 1ers noyaux je crois 3.13.0-35, 34, 33) qui est sélectionné.
Je ne suis donc pas allé sur ubuntu option, j'ai tappé "e" directement, supprimé quiet et splash et relancé tout de suite en faisant F10.
j'ai bien plein d'info qui apparaissant à mon écran mais ça défile et je n'ai rien le temps de lire et encore moins de noter! peut-on faire un copier coller?
Hors ligne
#24 Le 30/08/2014, à 06:22
- F50
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
j'ai bien plein d'info qui apparaissant à mon écran mais ça défile et je n'ai rien le temps de lire et encore moins de noter! peut-on faire un copier coller?
C'est normal, si ton ordi bloque, il devrait s'arrêter sur une de ces lignes et ne plus avancer, te laissant ainsi tout le temps de noter en buvant même un café, si ce n'est pas le cas, tu devrais arriver sur le bureau, donc que fait-il exactement ?
En relisant le #20, je vois que ce n'est probablement pas un problème de noyau mais de pilote graphique.
"- et aussi, qd je démarre en choisissant le noyau 3.2.0-67 et que j'arrive donc à démarrer linux, le message d'erreur apparaît:
erreur interne "usr/bin/Xorg"
et une fenetre s'ouvre me demandant si je veux bien créer un "NVIDIA report bug file" "
Boot sur le noyau 3.2.0-67, une fois sur le bureau donne le retour (entre les balises code <>) des commandes :
lspci -v
cat /var/log/Xorg.0.log
#25 Le 30/08/2014, à 09:42
- nam1962
Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04
Avec 2 Go de Ram, en principe il te faut une xubuntu 32 bits : http://cdimage.ubuntu.com/xubuntu/relea … p-i386.iso
Peux tu voir ce que donne cette iso en livesession sur ton ordi ?
[ Modéré ]
Hors ligne