Pages : 1
#1 Le 29/08/2014, à 22:28
- tcho
perte grub après redémarrage windows 8.1
Bonjour à tous,
ma config:
Carte mère Asus P5Q-E
sda (velociraptor);
sda1 ext4 root ubuntu 14.04
sda2 ntfs Win7
ssa3 swap linux
sdb:
sdb1 ntfs (data)
sdb2 ext4 /home
sdc (clé usb):
sdc1 live CD ubuntu 14.04
sdd:
sdd1 ntfs (data)
sde (SSD):
sde1 ntfs Win8.1
Info boot-repair: http://paste.ubuntu.com/8181785/
après avoir redémarré Windows 8.1, j'accède maintenant directement au dualboot windows, sans passer par Grub
comme vu sur les formums Windows, j'ai désactivé le démarrage rapide, et ma carte mère est trop vieille pour proposer l'UEFI, donc pas de secure boot à désactiver.
Je souhaite maintenant retrouver mon GRUB, mais de ce que j'ai lu il vaut mieux demander conseil avant d'utiliser la commande de réparation automatique.
Détail important: il semble que windows 8.1 utilisr le bootloader de Win7, ce qui ne m'arrange pas (j'aurais voulu réaffecter la partition sda2).
Hors ligne
#2 Le 30/08/2014, à 06:48
- malbo
Re : perte grub après redémarrage windows 8.1
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
=> No boot loader is installed in the MBR of /dev/sdd.
=> Grub2 (v1.99) is installed in the MBR of /dev/sde and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20120131
Boot sector info: Syslinux looks at sector 1987960 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdc1 starts
at sector 0. But according to the info from fdisk,
sdc1 starts at sector 62.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
sdd1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sde1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 150.0 GB, 150039945216 bytes
255 heads, 63 sectors/track, 18241 cylinders, total 293046768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 54,781,951 54,779,904 83 Linux
/dev/sda2 * 54,781,952 276,662,271 221,880,320 7 NTFS / exFAT / HPFS
/dev/sda3 276,662,272 293,046,767 16,384,496 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 63 656,383,769 656,383,707 7 NTFS / exFAT / HPFS
/dev/sdb2 656,384,000 1,953,523,711 1,297,139,712 83 Linux
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 3880 MB, 3880452096 bytes
120 heads, 62 sectors/track, 1018 cylinders, total 7579008 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 62 7,573,919 7,573,858 c W95 FAT32 (LBA)
Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 2,048 3,907,028,991 3,907,026,944 7 NTFS / exFAT / HPFS
Drive: sde _____________________________________________________________________
Disk /dev/sde: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sde1 * 2,048 488,394,751 488,392,704 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d ext4
/dev/sda2 CA9ABA029AB9EAD9 ntfs win7
/dev/sda3 7440d1e6-122e-4bb8-83f6-5057059cb13c swap
/dev/sdb1 619C209E285F65D9 ntfs data
/dev/sdb2 6ac95658-03ba-4ea4-926b-7e3da57f4a4e ext4
/dev/sdc1 3D47-10BF vfat
/dev/sdd1 3D51AC6D35C9AD0F ntfs tcho2000
/dev/sde1 DCE07DCCE07DAD80 ntfs win8
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d
else
search --no-floppy --fs-uuid --set=root a3f09bef-86b8-47ca-b3d1-95a6714ab03d
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a3f09bef-86b8-47ca-b3d1-95a6714ab03d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d
else
search --no-floppy --fs-uuid --set=root a3f09bef-86b8-47ca-b3d1-95a6714ab03d
fi
linux /boot/vmlinuz-3.13.0-34-generic root=UUID=a3f09bef-86b8-47ca-b3d1-95a6714ab03d ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-34-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-a3f09bef-86b8-47ca-b3d1-95a6714ab03d' {
menuentry 'Ubuntu, avec Linux 3.13.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-advanced-a3f09bef-86b8-47ca-b3d1-95a6714ab03d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d
else
search --no-floppy --fs-uuid --set=root a3f09bef-86b8-47ca-b3d1-95a6714ab03d
fi
echo 'Chargement de Linux 3.13.0-34-generic…'
linux /boot/vmlinuz-3.13.0-34-generic root=UUID=a3f09bef-86b8-47ca-b3d1-95a6714ab03d ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-34-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-recovery-a3f09bef-86b8-47ca-b3d1-95a6714ab03d' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d
else
search --no-floppy --fs-uuid --set=root a3f09bef-86b8-47ca-b3d1-95a6714ab03d
fi
echo 'Chargement de Linux 3.13.0-34-generic…'
linux /boot/vmlinuz-3.13.0-34-generic root=UUID=a3f09bef-86b8-47ca-b3d1-95a6714ab03d ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-34-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-a3f09bef-86b8-47ca-b3d1-95a6714ab03d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d
else
search --no-floppy --fs-uuid --set=root a3f09bef-86b8-47ca-b3d1-95a6714ab03d
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=a3f09bef-86b8-47ca-b3d1-95a6714ab03d ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-a3f09bef-86b8-47ca-b3d1-95a6714ab03d' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d
else
search --no-floppy --fs-uuid --set=root a3f09bef-86b8-47ca-b3d1-95a6714ab03d
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=a3f09bef-86b8-47ca-b3d1-95a6714ab03d ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d
else
search --no-floppy --fs-uuid --set=root a3f09bef-86b8-47ca-b3d1-95a6714ab03d
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a3f09bef-86b8-47ca-b3d1-95a6714ab03d
else
search --no-floppy --fs-uuid --set=root a3f09bef-86b8-47ca-b3d1-95a6714ab03d
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 8 (loader) (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-CA9ABA029AB9EAD9' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 CA9ABA029AB9EAD9
else
search --no-floppy --fs-uuid --set=root CA9ABA029AB9EAD9
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows 7 (loader) (sur /dev/sdd1)' --class windows --class os $menuentry_id_option 'osprober-chain-DCE07DCCE07DAD80' {
insmod part_msdos
insmod ntfs
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1 DCE07DCCE07DAD80
else
search --no-floppy --fs-uuid --set=root DCE07DCCE07DAD80
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=a3f09bef-86b8-47ca-b3d1-95a6714ab03d / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb2 during installation
UUID=6ac95658-03ba-4ea4-926b-7e3da57f4a4e /home ext4 defaults 0 2
# swap was on /dev/sda2 during installation
UUID=7440d1e6-122e-4bb8-83f6-5057059cb13c none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-Z2oOWcsg/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-Z2oOWcsg/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-Z2oOWcsg/Tmp_Log: No such file or directory
File descriptor 9 (/proc/21216/mounts) leaked on lvscan invocation. Parent PID 1131: bash
File descriptor 63 (pipe:[166158]) leaked on lvscan invocation. Parent PID 1131: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-29__20h47 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
=================== os-prober:
/dev/sda1:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
/dev/sda2:Windows 8 (loader):Windows:chain
/dev/sde1:Windows 7 (loader):Windows1:chain
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="a3f09bef-86b8-47ca-b3d1-95a6714ab03d" TYPE="ext4"
/dev/sda2: LABEL="win7" UUID="CA9ABA029AB9EAD9" TYPE="ntfs"
/dev/sda3: UUID="7440d1e6-122e-4bb8-83f6-5057059cb13c" TYPE="swap"
/dev/sdb1: LABEL="data" UUID="619C209E285F65D9" TYPE="ntfs"
/dev/sdb2: UUID="6ac95658-03ba-4ea4-926b-7e3da57f4a4e" TYPE="ext4"
/dev/sdc1: UUID="3D47-10BF" TYPE="vfat"
/dev/sdd1: LABEL="tcho2000" UUID="3D51AC6D35C9AD0F" TYPE="ntfs"
/dev/sde1: LABEL="win8" UUID="DCE07DCCE07DAD80" TYPE="ntfs"
2 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Aug 27 17:22 grub.d
total 76
-rwxr-xr-x 1 root root 9424 Apr 11 10:51 00_header
-rwxr-xr-x 1 root root 6058 Apr 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 12:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apr 11 10:51 30_os-prober
-rwxr-xr-x 1 root root 1416 Apr 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 11 10:51 40_custom
-rwxr-xr-x 1 root root 216 Apr 11 10:51 41_custom
-rw-r--r-- 1 root root 483 Apr 11 10:51 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb1.
sdb2 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb2.
sdd1 : sdd, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdd1.
sde1 : sde, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sde1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 63 sectors * 512 bytes
sdd : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
sde : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD1500HLFS-0 (scsi)
Disk /dev/sda: 150GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 28.0GB 28.0GB primary ext4
2 28.0GB 142GB 114GB primary ntfs boot
3 142GB 150GB 8389MB primary linux-swap(v1)
Model: ATA WDC WD1001FALS-0 (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 336GB 336GB primary ntfs
2 336GB 1000GB 664GB primary ext4
Model: USB DISK 2.0 (scsi)
Disk /dev/sdc: 3880MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 31.7kB 3878MB 3878MB primary fat32 boot, lba
Model: ATA WDC WD2003FZEX-0 (scsi)
Disk /dev/sdd: 2000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 2000GB 2000GB primary ntfs
Model: ATA Samsung SSD 840 (scsi)
Disk /dev/sde: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 250GB 250GB primary ntfs boot
=================== parted -lm:
BYT;
/dev/sda:150GB:scsi:512:512:msdos:ATA WDC WD1500HLFS-0;
1:1049kB:28.0GB:28.0GB:ext4::;
2:28.0GB:142GB:114GB:ntfs::boot;
3:142GB:150GB:8389MB:linux-swap(v1)::;
BYT;
/dev/sdb:1000GB:scsi:512:512:msdos:ATA WDC WD1001FALS-0;
1:32.3kB:336GB:336GB:ntfs::;
2:336GB:1000GB:664GB:ext4::;
BYT;
/dev/sdc:3880MB:scsi:512:512:msdos: USB DISK 2.0;
1:31.7kB:3878MB:3878MB:fat32::boot, lba;
BYT;
/dev/sdd:2000GB:scsi:512:4096:msdos:ATA WDC WD2003FZEX-0;
1:1049kB:2000GB:2000GB:ntfs::;
BYT;
/dev/sde:250GB:scsi:512:512:msdos:ATA Samsung SSD 840;
1:1049kB:250GB:250GB:ntfs::boot;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw)
/dev/sdd1 on /mnt/boot-sav/sdd1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sde1 on /mnt/boot-sav/sde1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdd1 size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sde1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdb2 sdc sdc1 sdd sdd1 sde sde1 sg0 sg1 sg2 sg3 sg4 sg5 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 e8 43 03 |........?.....C.|
00000020 00 00 00 00 80 00 80 00 f8 9f 39 0d 00 00 00 00 |..........9.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 d9 ea b9 9a 02 ba 9a ca |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 |........?...?...|
00000020 00 00 00 00 80 00 80 00 da 9e 1f 27 00 00 00 00 |...........'....|
00000030 04 00 00 00 00 00 00 00 ed f9 71 02 00 00 00 00 |..........q.....|
00000040 f6 00 00 00 01 00 00 00 d9 65 5f 28 9e 20 9c 61 |.........e_(. .a|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdd1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 7f e0 e8 00 00 00 00 |................|
00000030 04 00 00 00 00 00 00 00 ff 07 8e 0e 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 0f ad c9 35 6d ac 51 3d |...........5m.Q=|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sde1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 47 1c 1d 00 00 00 00 |.........G......|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 80 ad 7d e0 cc 7d e0 dc |..........}..}..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.9G 122M 3.8G 4% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 799M 1.3M 798M 1% /run
/dev/sdc1 vfat 3.7G 964M 2.7G 27% /cdrom
/dev/loop0 squashfs 923M 923M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 1.6M 3.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 3.9G 76K 3.9G 1% /run/shm
none tmpfs 100M 60K 100M 1% /run/user
/dev/sda1 ext4 26G 4.7G 20G 20% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 106G 99G 7.5G 93% /mnt/boot-sav/sda2
/dev/sdb1 fuseblk 313G 151G 163G 49% /mnt/boot-sav/sdb1
/dev/sdb2 ext4 609G 111G 467G 20% /mnt/boot-sav/sdb2
/dev/sdd1 fuseblk 1.9T 1.2T 695G 63% /mnt/boot-sav/sdd1
/dev/sde1 fuseblk 233G 39G 195G 17% /mnt/boot-sav/sde1
=================== fdisk -l:
Disk /dev/sda: 150.0 GB, 150039945216 bytes
255 heads, 63 sectors/track, 18241 cylinders, total 293046768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00031a11
Device Boot Start End Blocks Id System
/dev/sda1 2048 54781951 27389952 83 Linux
/dev/sda2 * 54781952 276662271 110940160 7 HPFS/NTFS/exFAT
/dev/sda3 276662272 293046767 8192248 82 Linux swap / Solaris
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00089293
Device Boot Start End Blocks Id System
/dev/sdb1 63 656383769 328191853+ 7 HPFS/NTFS/exFAT
/dev/sdb2 656384000 1953523711 648569856 83 Linux
Disk /dev/sdc: 3880 MB, 3880452096 bytes
120 heads, 62 sectors/track, 1018 cylinders, total 7579008 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000279a4
Device Boot Start End Blocks Id System
/dev/sdc1 * 62 7573919 3786929 c W95 FAT32 (LBA)
Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000a099b
Device Boot Start End Blocks Id System
/dev/sdd1 2048 3907028991 1953513472 7 HPFS/NTFS/exFAT
Disk /dev/sde: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xca01d792
Device Boot Start End Blocks Id System
/dev/sde1 * 2048 488394751 244196352 7 HPFS/NTFS/exFAT
User choice: Is sda (150GB) a removable disk? no
=================== Final advice in case of recommended repair
Please do not forget to make your BIOS boot on sda (150GB) disk!
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sde1.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
No change has been performed on your computer.
On voit en bas de ce Boot-Info :
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sde1.
Additional repair would be performed: unhide-bootmenu-10s
C'est le descriptif de la "Réparation recommandée" que Boot-Repair propose de faire. Elle réinstallera le chargeur d'amorçage de Grub dans le MBR de ton disque dur (*) de sorte que ton ordi démarre par défaut sur le menu Grub, comme avant.
Action pratique : tu refais exactement ce que tu as fait pour faire ce Boot-Info mais cette fois au lieu de cliquer sur "Create a BootInfo summary", tu cliques sur "Recommanded repair"
(*) en fait, Boot-Repair va probablement installer également un chargeur d'amorçage dans le MBR de tes autres disques durs internes. On pourrait l'éviter mais je ne sais pas trop te guider pour faire ça. C'est un des effets collatéraux de Boot-Repair : il répare avec sa "réparation recommandée" mais il en fout partout...C'est rapide mais un peu crado.
Dernière modification par malbo (Le 30/08/2014, à 06:53)
Hors ligne
#3 Le 30/08/2014, à 07:12
- ikewdu
Re : perte grub après redémarrage windows 8.1
Salut,
Tu as visiblement 2 loaders pour tes Windows :
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sde1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
Quant à grub2, il est là :
Grub2 (v1.99) is installed in the MBR of /dev/sde
Mais pas là :
Windows 7/8/2012 is installed in the MBR of /dev/sda
Visiblement, grub fait son boulot : (même s'il inverse W7 et W8... tout dépend du loader installé):
=================== os-prober:
/dev/sda1:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linu:
/dev/sda2:Windows 8 (loader):Windows:chain
/dev/sde1:Windows 7 (loader):Windows1:chain
Boot-repair te propose de réinstaller grub2 sur tous les disques possédant des partitions actives:
This setting would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
Dans l'absolu, la réparation de boot-repair devrait fonctionner. L'ordre de démarrage de tes disques est la seule cause du problème. Si sda boote avant sde (ce qui est logique si on considère la situation actuelle), c'est le mbr windows qui s'exécute, et il lance le loader qui se trouve dans sda2. Essaie de permuter sda et sde et vois déjà ce qu'il se passe. Grub devrait apparaître, mais il risque d'être "chamboulé" par les nouvelles dénominations de disques et ne plus trouver les "cibles" qu'il vise. Mais tu auras confirmation que le souci vient de là.
edit. Désolé Malbo, nos réponses se sont croisées.
Dernière modification par ikewdu (Le 30/08/2014, à 07:14)
Hors ligne
#4 Le 07/09/2014, à 20:18
- tcho
Re : perte grub après redémarrage windows 8.1
Merci à tous.
La "reparation recommandée" a été un succès.
Hors ligne
#5 Le 08/09/2014, à 04:02
- malbo
Re : perte grub après redémarrage windows 8.1
Je ne suis pas sûr du tout que la réparation soit complète. Depuis ta session du Ubuntu installé, je te prie de passer cette commande dans un terminal :
sudo debconf-show grub-pc
Et de coller le résultat obtenu dans ta réponse.
Hors ligne
#6 Le 08/09/2014, à 08:44
- Babdu89
Re : perte grub après redémarrage windows 8.1
Bonjour.
@ malbo: tu dis;
(*) en fait, Boot-Repair va probablement installer également un chargeur d'amorçage dans le MBR de tes autres disques durs internes. On pourrait l'éviter mais je ne sais pas trop te guider pour faire ça. C'est un des effets collatéraux de Boot-Repair : il répare avec sa "réparation recommandée" mais il en fout partout...C'est rapide mais un peu crado.
La réponse et la suivante, mais il faut connaître le fonctionnement des scripts de Boot-Repair. comme j'ai testé en aidant YannUbuntu, voici ce qui se passe.
Mai il me semble avoir déjà expliqué ceci.
Dans le boot info , on voit;
User choice: Is sda (150GB) a removable disk? no
Dans le cas d'un multi disques (internes + externe ) L'utilisateur à tendance à répondre la "vérité" qu sujet de sa config.
Seulement; çà a les conséquences suivantes.
Répondre Non, fera que Boot-Repair va faire la réinstallation, comme indiqué, il va écrire la première partie de Grub dans les secteurs de boot de tous les disques. Même ceux qui n'ont pas d'OS installés dessus. Sauf les hdd usb .
Ceci afin de permettre à la machine de redémarrer sur le hdd choisi dans le Bios ( même si ce n'est pas celui où est installé l'Os à réparer.) .
Répondre Oui, fera que Boot-Repair va réinstaller Grub ,en mettant la première partie de Grub dans le secteur d'amorçage du hdd d'installation .
Nota, avec la réparation en passant par "Options avancées" , l'utilisateur pourra lui même choisir comment réinstaller Grub . En changeant les options proposées par défaut . Ces options sont celle de la réparation recommandée.
Testes à faire avec une config multi disques;
Lancer Boot-Repair . À la question concernant les hdd amovibles ou pas . Répondre Oui et non , puis voir les Options proposées dans les "Options avancées" ...
Voila si çà peut éclairer sur cette option .
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#7 Le 08/09/2014, à 10:29
- malbo
Re : perte grub après redémarrage windows 8.1
@Babdu89 : Je sais que tu l'as expliqué plusieurs fois mais la réparation avancée avec Boot-Repair, ça me fatigue. Je veux juste proposer la "Réparation recommandée" si je pense qu'elle est efficace. Quitte à consolider derrière au besoin (d'où ma demande du post #5 pour finaliser la réparation)
Hors ligne
#8 Le 08/09/2014, à 12:46
- Babdu89
Re : perte grub après redémarrage windows 8.1
@ malbo tu dis;
Je sais que tu l'as expliqué plusieurs fois mais la réparation avancée avec Boot-Repair, ça me fatigue.
Alors pour guider l'utilisateur pour faire une réparation recommandée, si sa config est multi disques, et qu'il n'a pas fait de réparation avec Boot-Repair...
Lui dire de répondre "Oui" à la question concernant un éventuel hdd amovible. Même si le hdd est interne.
La réparation recommandée va faire la répare sur le hdd concerné, sans toucher aux secteurs de boot des autres hdd...
(*) en fait, Boot-Repair va probablement installer également un chargeur d'amorçage dans le MBR de tes autres disques durs internes. On pourrait l'éviter mais je ne sais pas trop te guider pour faire ça.
On peut utiliser la réparation recommandée en faisant ceci.
Dans le cadre d'une installation sur une machine multi disques. Boot-Repair va forcément demander si le disque (/dev/sd*) est un disque amovible?
La réponse de l'utilisateur doit donner si tu veux lui faire réparer, en ne mettant Grub première partie que sur le hdd d'installation doit être Oui ! même si le hdd est un hdd interne .
La réparation recommandée va dans ce cas proposer de réinstaller Grub sur l'Os qui démarre la machine par défaut, en ne mettant que la première partie de Grub dans le secteur de boot du hdd d'installation...
Si l'utilisateur a un dual boot W$ /Linux sur deux hdd, chaque Os sur le sien. Ce type de manip va préserver le MBR du hdd où est installé W$ ...
Grub sera réinstallé correctement sur le Linux, et la première partie de Grub sur le hdd d'installation de l'Os à réparer. Il faudra faire booter la machine sur ce hdd.
Si l'utilisateur a un multi boot multi disques.
Par exemple 1 W$ plus 3 Linux . W$ sur son hdd et les 3 Linux sur les autres disques.
En réparant depuis une session live...
La réparation recommandée va se faire sur l'Os par défaut d'un hdd, celui qui démarre la machine (si les 3 Linux sont sur le même), ou sur un des hdd si les 3 Linux sont installés sur deux ou 3 hdd.
Ce sera sur l'Os qui démarre par défaut la machine... Mais si il faut réparer un des autres OS, il faut passer par les "Options avancées", et choisir l'Os à réparer, et le disque qui verra son secteur de boot recevoir Grub première partie .
En réparant depuis l'OS, en installant Boot-Repair dedans.
Seul la réinstallation sur cet OS ne peut être faite avec Boot-Repair . Grub première partie sera réinstallé dans le secteur de boot du hdd d'installation de l'OS.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne