#1 Le 15/11/2007, à 19:21
- kikislater
[Partiellement résolu] Bi-écran : Résolution du second écran
Bonjour,
J'ai un laptop 15" acer 5710zg auquel j'essais de connecter un lcd 22" Fujitsu-siemens L22-1W mais petit problème :
Je le connecte j'ai bien le double affichage grà¢ce à Ati Catalyst Control Center des drivers 8.42.3 mais impossible d'av oir la bonne résolution sur le 22 ! Ca bave c'est illisible. Il est comme la résolution du laptop c'est à dire du 1280x800 !
J'ai essayé de ne pas passer par le Ati CCC masi là aucun affichage sur le 22". Voici mon Xorg.conf si vosu pouvez m'aider ca serait vraiment sympa.
Merci
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
Screen 1 "L22-1W" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# InputDevice "Synaptics Touchpad"
InputDevice "Touchpad"
Option "AIGLX" "true"
EndSection
Section "Files"
EndSection
Section "Module"
# Load "Synaptics"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# Identifier "Synaptics Touchpad"
Identifier "Touchpad"
Driver "Mouse"
Option "CorePointer"
# Driver "synaptics"
# Option "SendCoreEvents" "true"
Option "Device" "/dev/gpmdata"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
Option "Protocol" "GlidePointPS/2"
Option "ZAxisMapping" "4 5"
# Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "L22-1W"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "0 ATI Mobility Radeon HD 2300"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Device"
Identifier "1 ATI Mobility Radeon HD 2300"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
# Option "MetaModes" "1680x1050-1280x800"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "0 ATI Mobility Radeon HD 2300"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "L22-1W"
Device "1 ATI Mobility Radeon HD 2300"
Monitor "L22-1W"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1680x1050" "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x800"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Dernière modification par kikislater (Le 20/11/2007, à 23:03)
Hors ligne
#2 Le 20/11/2007, à 21:16
- kikislater
Re : [Partiellement résolu] Bi-écran : Résolution du second écran
Arf je suis désespéré !
J'ai tenté quelques tests mais l'affichage reste toujours en 1280x800 sur mon 22"
Voici mon dernier xorg :
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
Screen 1 "L22-1W" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# InputDevice "Synaptics Touchpad"
InputDevice "Touchpad"
Option "AIGLX" "true"
EndSection
Section "Files"
EndSection
Section "Module"
# Load "Synaptics"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# Identifier "Synaptics Touchpad"
Identifier "Touchpad"
Driver "Mouse"
Option "CorePointer"
# Driver "synaptics"
# Option "SendCoreEvents" "true"
Option "Device" "/dev/gpmdata"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
Option "Protocol" "GlidePointPS/2"
Option "ZAxisMapping" "4 5"
# Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "L22-1W"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "0 ATI Mobility Radeon HD 2300"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
# Option "MetaModes" "1280x800, 1680x1050"
EndSection
Section "Device"
Identifier "1 ATI Mobility Radeon HD 2300"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
# Option "MetaModes" "1680x1050, 1280x800; 1280x800, 1280x800"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "0 ATI Mobility Radeon HD 2300"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
# Modes "1280x800"
EndSubSection
EndSection
Section "Screen"
Identifier "L22-1W"
Device "1 ATI Mobility Radeon HD 2300"
Monitor "L22-1W"
DefaultDepth 24
SubSection "Display"
Depth 24
# Modes "1680x1050" "1440x900" "1280x800"
#Modes "1680x1050"
#Modes "1680x1050@60"
# Virtual 1680 1050
EndSubSection
SubSection "Display"
Depth 1
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Hors ligne
#3 Le 20/11/2007, à 22:59
- kikislater
Re : [Partiellement résolu] Bi-écran : Résolution du second écran
Partiellement résolu :
Le problème maintenant c'est que le portable n'est pas en 1280x800 ! Lorsque je bouge la souris, l'ecran se déplace mais bon c'est pas grave tant que j'arrive à avoir mon 22" dasn sa résolution native chez moi je suis content
Voici mon nouveau xorg :
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
# Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
Identifier "Clone Mode"
# Screen 1 "L22-1W" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# InputDevice "Synaptics Touchpad"
InputDevice "Touchpad"
Option "AIGLX" "true"
EndSection
Section "Files"
EndSection
Section "Module"
# Load "Synaptics"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# Identifier "Synaptics Touchpad"
Identifier "Touchpad"
Driver "Mouse"
Option "CorePointer"
# Driver "synaptics"
# Option "SendCoreEvents" "true"
Option "Device" "/dev/gpmdata"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
Option "Protocol" "GlidePointPS/2"
Option "ZAxisMapping" "4 5"
# Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
#Section "Monitor"
# Identifier "L22-1W"
# HorizSync 30.0 - 82.0
# VertRefresh 50.0 - 75.0
# Option "DPMS"
#EndSection
Section "Device"
Identifier "0 ATI Mobility Radeon HD 2300"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "HSync2" "30.0 - 82.0"
Option "VRefresh2" "50.0 - 75.0"
Option "DesktopSetup" "clone"
Option "Mode2" "1680x1050"
# Option "MetaModes" "1280x800, 1680x1050"
EndSection
#Section "Device"
# Identifier "1 ATI Mobility Radeon HD 2300"
# Driver "fglrx"
# Option "VideoOverlay" "on"
# Option "OpenGLOverlay" "off"
# Option "MetaModes" "1680x1050, 1280x800; 1280x800, 1280x800"
#EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "0 ATI Mobility Radeon HD 2300"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1680x1050"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Hors ligne