Pages : 1
#1 Le 05/09/2014, à 13:20
- didier-co
problème suite migration vers 14.04
bonjour
j'ai un ordi portable HP probook4710s sur lequel je viens de faire la mise à jour pour la version Ubuntu 14.04.
depuis j'ai les problèmes suivants:
toutes les icônes du lanceur sont couvertes de "mosaïques blanches" mais sont actives
l’icône du tableau de bord s'ouvre sur une fenêtre totalement illisible et instable
lorsque j'ouvre le terminal, il est totalement inactif et impossible d'y écrire
PS: je suis novice et débutant en informatique
merci de votre aide
didier
Hors ligne
#2 Le 05/09/2014, à 13:33
- Eniot
Re : problème suite migration vers 14.04
Bonjour,
Peux-tu repasser sous la console avec la combinaison suivante: ctrl+alt+F1 ?
Si Oui, log toi et tente mise à jour des paquets sudo apt-get update et mise à jour système sudo apt-get upgrade et redémarres.
Dernière modification par Sinikrole (Le 05/09/2014, à 13:34)
Si tu penses que mon aide t’a été bénéfique alors n’hésites pas à contribuer également à ton tour à l’aide d’un don ;-) Je te remercie d’avance
https://www.paypal.com/cgi-bin/webscr?c … source=url
Hors ligne
#3 Le 05/09/2014, à 13:39
- michel_04
Re : problème suite migration vers 14.04
Bonjour,
Peux-tu repasser sous la console avec la combinaison suivante: ctrl+alt+F1 ?
Si Oui, log toi et tente mise à jour des paquets sudo apt-get update et mise à jour système sudo apt-get upgrade et redémarres.
Pense à mettre les commandes entre balises Code ce qui les différencie du commentaire, merci.
Comme :
Ctrl + Alt + F1
Puis :
sudo apt-get update
sudo apt-get dist-upgrade
PS :
Important :
Lorsque tu colles des retours de commandes (invite de commande + commande + retour de commande + invite de commande), le contenu d'un fichier de configuration ou le contenu d'un fichier dépassant une dizaine de lignes (log, sources.list, xorg.conf, etc...), tu dois les mettre entre balises Code (les <> bleus de la barre de mise en forme) comme indiqué ICI et LÀ.
Lire Aide à l'utilisation du forum Ubuntu-FR
Extrait :
Balise CODELe texte inséré entre les balises code sera affiché avec une police type "console". De plus, si la longueur du texte dépasse un certain nombre de lignes, il sera mis dans un cadre avec une barre de défilement sur le côté.
C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambiguë que d'autres polices sur certains caractères.
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#4 Le 05/09/2014, à 13:55
- Eniot
Re : problème suite migration vers 14.04
Bonjour Michel,
Merci pour ce rappel. J'avoue que j'avais lu ce truc quelque part et je le cherchais dernièrement.
Je l' appliquerai le plus possible à l'avenir.
Merci
Si tu penses que mon aide t’a été bénéfique alors n’hésites pas à contribuer également à ton tour à l’aide d’un don ;-) Je te remercie d’avance
https://www.paypal.com/cgi-bin/webscr?c … source=url
Hors ligne
#5 Le 06/09/2014, à 22:41
- didier-co
Re : problème suite migration vers 14.04
bonsoir
merci d'avoir été aussi réactifs à ma demande
je vais tester ces propositions et vous tiens au courant
bien cordialement
didier
Hors ligne
#6 Le 07/09/2014, à 13:37
- didier-co
Re : problème suite migration vers 14.04
bonjour
j'ai fait Ctrl+Alt+F1 et là j'arrive bien sur une sorte de terminal plein écran
à ce moment j'ai eu un petit souci car il m'est demandé mon login et mon password
et j'ai dû réessayer une bonne dizaine de fois le login car j'avais régulièrement le message
"login incorrect"! pourtant c'est juste mon prénom et je ne l'ai jamais changé.
bref, j'ai lancé ensuite comme proposé les deux commandes
"sudo apt-get update"
et ensuite "sudo apt-get dist-upgrade"
puis "sudo reboot"
et en fait cette maoeuvre n'a rien changé à mon problème initial.
merci de vos retours
cordialement,
didier
Hors ligne
#7 Le 07/09/2014, à 15:57
- malbo
Re : problème suite migration vers 14.04
Est-ce que tu vois le menu Grub au démarrage ?
Hors ligne
#8 Le 07/09/2014, à 16:22
- didier-co
Re : problème suite migration vers 14.04
oui! quand je démarre j'ai d'abord une page affichant:
GRUB loading stage 1.5
Hors ligne
#9 Le 07/09/2014, à 17:01
- malbo
Re : problème suite migration vers 14.04
GRUB loading stage 1.5
Là ça sent le pâté. Je te prie de faire un Boot-Info depuis une session live de Ubuntu 14.04.1 en suivant cette procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Ne clique PAS sur "Recommanded repair" ; contente-toi de cliquer sur "Create a BootInfo summary". Tu colleras l'URL de ton Boot-Info dans ta réponse.
Hors ligne
#10 Le 07/09/2014, à 17:22
- didier-co
Re : problème suite migration vers 14.04
voulez-vous dire que je dois faire un Boot-Info à partir d'une session installée sur un CD ou clé USB
et non du système Ubuntu installé sur l'ordinateur.
excusez si je pose une question stupide mais je suis totalement novice sur toutes ces questions.
merci à vous
didier
Hors ligne
#11 Le 08/09/2014, à 05:45
- malbo
Re : problème suite migration vers 14.04
La question n'est pas stupide. J'imaginais que le Boot-Info ne pouvait pas être fait depuis Ubuntu installé à cause de tes problèmes mais si tu arrives à le faire comme ça, fais-le. Sinon, tu le fais depuis une session live.
Hors ligne
#12 Le 08/09/2014, à 14:49
- didier-co
Re : problème suite migration vers 14.04
bonjour
effectivement je ne peux pas le faire à partir du disque dur
j'ai fait un dvd avec une session ubuntu 14.04 et j'ai pu lancer une Boot Info
voici son adresse:
http://paste.ubuntu.com/8290162/
encore merci pour votre aide
cordialement
didier
Hors ligne
#13 Le 08/09/2014, à 14:57
- malbo
Re : problème suite migration vers 14.04
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Grub Legacy (v0.97) is installed in the MBR of /dev/sda and looks on the
same drive in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: __________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/menu.lst /etc/fstab
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 607,032,089 607,032,027 83 Linux
/dev/sda2 607,032,090 625,137,344 18,105,255 5 Extended
/dev/sda5 607,032,153 625,137,344 18,105,192 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 8c282859-aeb6-44fe-b14d-7b3d92792253 ext3
/dev/sda5 0dd7250f-5d9a-48e4-91a4-cf75c68588ab swap
/dev/sr0 iso9660 Ubuntu 14.04 LTS amd64
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda1/boot/grub/menu.lst: ===========================
--------------------------------------------------------------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=8c282859-aeb6-44fe-b14d-7b3d92792253
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 11.10, kernel 3.0.0-30-generic
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/vmlinuz-3.0.0-30-generic root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro quiet splash
initrd /boot/initrd.img-3.0.0-30-generic
quiet
title Ubuntu 11.10, kernel 3.0.0-30-generic (recovery mode)
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/vmlinuz-3.0.0-30-generic root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro single
initrd /boot/initrd.img-3.0.0-30-generic
title Ubuntu 11.10, kernel 2.6.38-16-generic
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/vmlinuz-2.6.38-16-generic root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro quiet splash
initrd /boot/initrd.img-2.6.38-16-generic
quiet
title Ubuntu 11.10, kernel 2.6.38-16-generic (recovery mode)
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/vmlinuz-2.6.38-16-generic root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro single
initrd /boot/initrd.img-2.6.38-16-generic
title Ubuntu 11.10, kernel 2.6.32-41-generic
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/vmlinuz-2.6.32-41-generic root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro quiet splash
initrd /boot/initrd.img-2.6.32-41-generic
quiet
title Ubuntu 11.10, kernel 2.6.32-41-generic (recovery mode)
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/vmlinuz-2.6.32-41-generic root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro single
initrd /boot/initrd.img-2.6.32-41-generic
title Ubuntu 11.10, kernel 2.6.31-22-generic
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/vmlinuz-2.6.31-22-generic root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro quiet splash
initrd /boot/initrd.img-2.6.31-22-generic
quiet
title Ubuntu 11.10, kernel 2.6.31-22-generic (recovery mode)
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/vmlinuz-2.6.31-22-generic root=UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 ro single
initrd /boot/initrd.img-2.6.31-22-generic
title Ubuntu 11.10, memtest86+
uuid 8c282859-aeb6-44fe-b14d-7b3d92792253
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=8c282859-aeb6-44fe-b14d-7b3d92792253 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=0dd7250f-5d9a-48e4-91a4-cf75c68588ab none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-ffMLP7YP/Tmp_Log: No such file or directory
File descriptor 9 (/proc/10814/mounts) leaked on lvscan invocation. Parent PID 16719: bash
File descriptor 63 (pipe:[455266]) leaked on lvscan invocation. Parent PID 16719: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-09-08__12h38 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
ls: impossible d'accéder à /home/usr/.config: Aucun fichier ou dossier de ce type
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
=================== os-prober:
/dev/sda1:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="8c282859-aeb6-44fe-b14d-7b3d92792253" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda5: UUID="0dd7250f-5d9a-48e4-91a4-cf75c68588ab" TYPE="swap"
/dev/sr0: LABEL="Ubuntu 14.04 LTS amd64" TYPE="iso9660"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
No sda1/etc/default/grub
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 sept. 4 10:16 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 19:01 00_header
-rwxr-xr-x 1 root root 6058 mai 8 12:08 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 19:01 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 19:01 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 12:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 19:01 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 19:01 30_uefi-firmware
-rwxr-xr-x 1 root root 214 déc. 7 2009 40_custom
-rwxr-xr-x 1 root root 216 mai 15 19:01 41_custom
-rw-r--r-- 1 root root 483 déc. 7 2009 README
/mnt/boot-sav/sda1/boot/grub/menu.lst detected
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub1, grub1 , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD3200BEVT-2 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 311GB 311GB primary ext3 boot
2 311GB 320GB 9270MB extended
5 311GB 320GB 9270MB logical linux-swap(v1)
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
has been opened read-only.
Error: Can't have a partition outside the disk!
=================== parted -lm:
BYT;
/dev/sda:320GB:scsi:512:512:msdos:ATA WDC WD3200BEVT-2;
1:32.3kB:311GB:311GB:ext3::boot;
2:311GB:320GB:9270MB:::;
5:311GB:320GB:9270MB:linux-swap(v1)::;
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
has been opened read-only.
Error: Can't have a partition outside the disk!
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext3 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd freefall full fuse hidraw0 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.5G 510M 993M 34% /
udev devtmpfs 1.5G 12K 1.5G 1% /dev
tmpfs tmpfs 301M 1.2M 300M 1% /run
/dev/sr0 iso9660 964M 964M 0 100% /cdrom
/dev/loop0 squashfs 923M 923M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.5G 1.3M 1.5G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 1.5G 432K 1.5G 1% /run/shm
none tmpfs 100M 60K 100M 1% /run/user
/dev/sda1 ext3 285G 199G 72G 74% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8d392106
Device Boot Start End Blocks Id System
/dev/sda1 * 63 607032089 303516013+ 83 Linux
/dev/sda2 607032090 625137344 9052627+ 5 Extended
/dev/sda5 607032153 625137344 9052596 82 Linux swap / Solaris
Partition outside the disk détecté.
=================== Default settings
Recommended-Repair
This setting would purge (in order to fix packages fix legacy files) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
C'est immonde comme installation : je n'ai pas envie de t'aider à réparer ça. Je te suggère de sauvegarder sur disque dur externe les doc précieux que tu peux avoir sur le disque dur. Quand ce sera fait, je te suggère de faire une installation toute neuve de Ubuntu 14.04.1 en écrasant tout ce qu'il y a sur ton disque dur pour faire du tout neuf.
Hors ligne
#14 Le 08/09/2014, à 21:43
- etouan
Re : problème suite migration vers 14.04
Salut didier-co moi c'est didier alias etouan,
J'ai exactement le même problème que toi sur mon portable Toshiba satellite pro P300. Tu va te sentir moins seul. Ça vient peut être de notre prénom ce blème. Je ne vous cache pas que je suis fort embarrassé par la dernière réponse même si je remercie Malbo pour le temps consacré. Personnellement ma version 12 marchait très bien et je n'ai rien fait de particulier quand j'ai fais la mise à jour à part appuyer sur le bouton mise à jour.
Dans mon menu Grub au démarrage j'ai repéré une anomalie : sur toutes les versions d'Ubuntu qu'il me propose c'est la version 12.04 qui apparait. Celle d'avant. Par contre quand je la lance, je tombe sur la 14.04. En tout cas c'est ce qu'il y a marqué à un moment en bas à gauche de l'écran puis dans Parametre Systeme.
Par contre désolé mais je n'ai pas pu faire la manoeuvre dans la console : il prend bien mon login mais impossible de rentrer un mot de passe du coup je ne peux pas coller les deux lignes de commande que vous proposez.
merci pour votre travail
etouan
Dernière modification par etouan (Le 08/09/2014, à 22:17)
Hors ligne
#15 Le 09/09/2014, à 13:27
- didier-co
Re : problème suite migration vers 14.04
bonjour
comme vous le conseillez, je vais tout réinstaller.
merci pour votre aide
cordialement
didier
Hors ligne
Pages : 1