[Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

Compte anonymisé · Le 08/10/2014, à 16:20

Bonjour à tous

J'ai une téléphone portable SAMSUNG S3 mini 4Go
Dessus, j'y ait installé une carte mémoire de 8Go pour libérer la mémoire interne qui était déjà au 3/4 pleine

Ayant besoins de cette carte, j'ai voulu la retirer, sauvegarder ce qu'elle contenait sur Ubuntu pour faire une sauvegarde, insérer cette sauvegarde dans une autre carte mémoire (16 Go) pour la réinsérer dans le téléphone

Je souhaitais récupérer celle de 8 Go car j'en ai besoin pour mon GPS qui visiblement à du mal à gérer ce qui est au dessus de cette capacité

je l'ai retiré non sans avoir cliquer sur "démonté la carte", éteint l'appareil, retirer la batterie puis retirer la carte

Le problème est que cette carte n'est pas reconnu du tout par Ubuntu, elle ne détecte même pas qu'une carte a été inséré

Pire encore, lorsque je la ré insert dans mon téléphone Samsung, celui-ci ne la reconnaît pas non plus
Après recherche, ce dernier problème est un problème courant et beaucoup ont ce genre de problèmes qu'ils arrivent à régler ou pas

même si ma carte n'est pas reconnu, y a-t-il un moyen de voir où est le problème voir de faire le nécessaire pour le réparer même si les données dessus sont supprimés ?

Petite remarque en passant :
Par ailleurs, étant en train de mettre certains DVD au format avi, j'ai remarqué que les DVD enregistré avec mon ancien lecteur graveur de salon Samsung sont illisible avec ubuntu (il affiche un fichier vidéo" alors que le DVD passe correctement sur le Windows XP que j'ai installé dans une machine virtuelle
Les DVD en questions sont lisible sur n'importe quel lecteur de DVD de salon et fonctionnent correctement
J'ai lu également, mais je ne sais pas si c'est vrai, que les formatages de matériel Samsung sont des formatages "maison" reconnus uniquement par le matériel Samsung qui l'a enregistré

Je parle des DVD enregistrés car j'ai trouvé curieux qu'au moment même où j'ai ce problème d'une carte mémoire formaté par le téléphone Samsung et qui n'ai pas reconnus, j'ai le problème de la non reconnaissance des fichiers de DVD enregistrés par un lecteur graveur de salon de marque Samsung et qui n'est lisible que sur du Windows

Je ne demande pas de support concernant ces DVD

Quand à ma carte, malheureusement, il n'est pas reconnu non plus par Windows

Si quelqu'un à une idée pour m'aider à remettre carte mémoire SDHC en fonctionnement, ce serait sympa ?

Merci

Dernière modification par NéoUbuntonien (Le 12/10/2014, à 16:43)

αjet · Le 08/10/2014, à 17:08

Il y a des chances que ta carte soit formatee en exfat: https://doc.ubuntu-fr.org/exfat
Installe les paquets liste dans la doc et essaie de monter a nouveau ta carte.

Pour ce qui est des fichiers avi, je ne pense pas que ce soit correle, je te conseille d'ouvrir un autre topic.

Bougron · Le 08/10/2014, à 17:11

Bonjour.=
Peux-tu faire un autre post pour ce qui concerne la partie video et l'éliminer de cet endroit.
J'ai déjà vus trois posts en cours sur les cartes SD. Tu es le premier à dire que la carte revenue sur l'appareil d'origine ne marche pas.
Mais les autres personnes n'ont peut-être pas essayé.

Quelques secondes après avoir branché la carte, Peux-tu faire les commandes
dmesg | tail -25
lspci
fdisk -l
sudo fdisk -l

Dernière modification par Bougron (Le 08/10/2014, à 18:40)

Compte anonymisé · Le 08/10/2014, à 17:38

Bougron a écrit :

Bonjour.=
Peux-tu faire un autre post pour ce qui concerne la partie video et l'éliminer de cet endroit.
J'ai déjà vus trois posts en cours sur les cartes SD. Tu es le premier à dire que la carte revenue sur l'appareil d'origine ne marche pas.
Mais les autres personnes n'ont peut-être pas essayé.
Quelques secondes après avoir branché la carte, Peux-tu faire les commandes
dmesg | tail -25
lspci
fdisk -l

e de ce quui consernb

Je n'ai pas mis cette partie pour son dépannage mais pour dire que je trouvais ça curieux pour du matériel Samsung, pour moi, je passe par Windows et c'est tout, de toute manière je n'ai plus le lecteur graveur Samsung, il est tombé en panne et ça réparation coûtait le plus chère qu'un neuf

Je ne demande aucun support pour les DVDs enregistrés sur du samsung, cette ligne n'est qu'un remarque

Je viens de faire l'installation de αjet et branché ma carte

je n'ai aucun résultat

Carte connecté

bruno@cd214289:~$ dmesg | tail -25
[25751.391706] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[25751.391707] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25751.391708] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25751.677874] systemd-hostnamed[21675]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[25754.294655] wlan0: authenticate with b2:77:6c:f5:e8:40
[25754.321543] wlan0: send auth to b2:77:6c:f5:e8:40 (try 1/3)
[25754.323406] wlan0: authenticated
[25754.326162] wlan0: associate with b2:77:6c:f5:e8:40 (try 1/3)
[25754.335307] wlan0: RX AssocResp from b2:77:6c:f5:e8:40 (capab=0x411 status=0 aid=1)
[25754.335343] wlan0: associated
[25760.553582] wlan0: deauthenticated from b2:77:6c:f5:e8:40 (Reason: 15)
[25760.568543] cfg80211: Calling CRDA to update world regulatory domain
[25760.574381] cfg80211: World regulatory domain updated:
[25760.574390] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[25760.574398] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25760.574405] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25760.574411] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[25760.574417] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25760.574423] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25772.908548] wlan0: authenticate with b2:77:6c:f5:e8:40
[25772.934864] wlan0: send auth to b2:77:6c:f5:e8:40 (try 1/3)
[25772.936781] wlan0: authenticated
[25772.939459] wlan0: associate with b2:77:6c:f5:e8:40 (try 1/3)
[25772.948629] wlan0: RX AssocResp from b2:77:6c:f5:e8:40 (capab=0x411 status=0 aid=1)
[25772.948673] wlan0: associated
bruno@cd214289:~$

bruno@cd214289:~$ lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Device 041e (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation H87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
bruno@cd214289:~$

bruno@cd214289:~$ fdisk -l
bruno@cd214289:~$

Dernière modification par NéoUbuntonien (Le 08/10/2014, à 17:46)

αjet · Le 08/10/2014, à 17:47

Retente fdisk en sudo car ca devrait au moins te retourner les partitions de ton disque dur principal.

sudo fdisk -l

Est-ce que tu as deja reussi a lire d'autres cartes SD avec ce lecteur de cartes?

Si la carte n'est pas lisible depuis le telephone et le pc, il semblerait qu'elle soit grillee...

Compte anonymisé · Le 08/10/2014, à 17:56

αjet a écrit :

Retente fdisk en sudo car ca devrait au moins te retourner les partitions de ton disque dur principal.
sudo fdisk -l
.

bruno@cd214289:~$ sudo fdisk -l

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 têtes, 63 secteurs/piste, 30401 cylindres, total 488397168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x000678a7

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1   *        2048   480706559   240352256   83  Linux
/dev/sda2       480708606   488396799     3844097    5  Étendue
/dev/sda5       480708608   488396799     3844096   82  partition d'échange Linux / Solaris

Disk /dev/sdb: 320.1 GB, 320072933376 bytes
255 têtes, 63 secteurs/piste, 38913 cylindres, total 625142448 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xc565c565

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1              63   208379966   104189952   83  Linux
/dev/sdb2       208381952   416761855   104189952   83  Linux
/dev/sdb3       416761856   625141759   104189952   83  Linux

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdc » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Identifiant de disque : 0x00000000

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdc1               1  1953525167   976762583+  ee  GPT
La partition 1 ne commence pas sur une frontière de cylindre physique.
bruno@cd214289:~$

J'ai pourtant 4 partitions opérationnelles sur mon DD de 1 To
bizarre...

αjet a écrit :

Est-ce que tu as deja reussi a lire d'autres cartes SD avec ce lecteur de cartes?.

oui, toutes les autres cartes fonctionnent à merveille

αjet a écrit :

Si la carte n'est pas lisible depuis le telephone et le pc, il semblerait qu'elle soit grillee...

J'en ai bien peur mais je ne sais pas pourquoi
J'ai bien suivi toutes les procédures

Dernière modification par NéoUbuntonien (Le 08/10/2014, à 17:58)

marcodel · Le 08/10/2014, à 18:17

salut

NéoUbuntonien a écrit :

J'ai pourtant 4 partitions opérationnelles sur mon DD de 1 To
bizarre...

fdisk -l a écrit :

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdc » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.

donc :

parted -l

a+

Compte anonymisé · Le 08/10/2014, à 18:30

bruno@cd214289:~$ sudo parted -l
[sudo] password for bruno: 
Modèle: ATA Samsung SSD 840 (scsi)
Disque /dev/sda : 250GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos

Numéro  Début   Fin    Taille  Type      Système de fichiers  Fanions
 1      1049kB  246GB  246GB   primary   ext4                 démarrage
 2      246GB   250GB  3936MB  extended
 5      246GB   250GB  3936MB  logical   linux-swap(v1)


Modèle: ATA Hitachi HDS72103 (scsi)
Disque /dev/sdb : 320GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos

Numéro  Début   Fin    Taille  Type     Système de fichiers  Fanions
 1      32,3kB  107GB  107GB   primary  ext4
 2      107GB   213GB  107GB   primary  ext4
 3      213GB   320GB  107GB   primary  ext4


Modèle: ATA TOSHIBA DT01ACA1 (scsi)
Disque /dev/sdc : 1000GB
Taille des secteurs (logiques/physiques): 512B/4096B
Table de partitions : gpt

Numéro  Début   Fin     Taille  Système de fichiers  Nom             Fanions
 1      17,4kB  250GB   250GB   ext4                 partition sdc1
 2      250GB   500GB   250GB   ext4                 partition sdc2
 3      500GB   750GB   250GB   ext4                 partition sdc3
 4      750GB   1000GB  250GB   ext4                 partition sdc4


bruno@cd214289:~$

Merci marcodel

Bougron · Le 08/10/2014, à 19:01

Bonjour
Avec les trois commandes suivantes je voulais voir
dmesg | tail -25
L'accrochage de la carte SD au périphérique.
Je n'ai vu que des échanges réseau.
C'est à refaire avec une attente de 15 secondes et la commande dmesg | tail -75
Si vraiment, il n'est toujours pas présent, C'est le câblage...
lspci
La nature du support USB J'ai la réponse.
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)

fdisk -l J'ai oublié sudo J'espérais y voir listé le disque SD
Bien sùr les autres disques auraient été présents. Mais ils ne sont pas intéressants pour ce problème.

Compte anonymisé · Le 08/10/2014, à 19:33

Il y a eut bien plus de 15 secondes de décalage entre le moment où j'ai inséré la clef et le moment où j'ai fait la commande mais je veux bien réessayer demain

Je donnerai

dmesg | tail -25

dmesg | tail -75

lspci

sudo fdisk -l

Certaines commandes ont déjà été fait comme sudo fdisk -l p.e. mais je suis près à refaire, pas de soucis.

Bougron · Le 08/10/2014, à 20:11

Bonsoir.
Dans le post précédant, J'ai indiqué pourquoi je demandais les trois commandes la première fois.
Les commandes 2 et 3, je ne te les redemande pas car j'ai leur résultat qui me convient.
La première commande, Je te la redemande car, si elle n'est pas polluée, C'est là qu'il y a le problème.
C'est pour cela qu'une confirmation ou une infirmation est importante.
Pour info, Voila ce que j'espérais rencontrer

[ 3173.232760] usb 3-1: new high-speed USB device number 12 using xhci_hcd
[ 3173.262079] usb 3-1: New USB device found, idVendor=05e3, idProduct=0723
[ 3173.262090] usb 3-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 3173.262096] usb 3-1: Product: USB Storage
[ 3173.262101] usb 3-1: Manufacturer: Generic
[ 3173.262106] usb 3-1: SerialNumber: 000000009451
[ 3173.263139] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 3173.263267] usb-storage 3-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
[ 3173.263335] scsi8 : usb-storage 3-1:1.0
[ 3174.263131] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
[ 3174.263746] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 3174.268215] sd 8:0:0:0: [sdb] Attached SCSI removable disk

Dernière modification par Bougron (Le 08/10/2014, à 20:13)

Compte anonymisé · Le 08/10/2014, à 21:28

OK mais la première commande est celle que tu m'as déjà demandé et je peux t'assurer qu'il s'est écoulé plusieurs minutes entre l'insertion de la clef et la commande sur le terminal
J'espérais la commande 3 ça je ne l'ai pas encore fait
Quand à la dernière elle l'à déjà été

Je précise qu'à partir du moment ou j'ai insérer la clé, je ne l'ai retiré qu'au moment où j'ai éteint le PC mais je veux bien essayer

Comme le dit ajet, je pense que la mémoire sd est HS,
reste à savoir ce qu'il s'est passé...

Bougron · Le 08/10/2014, à 21:58

NéoUbuntonien a écrit :

OK mais la première commande est celle que tu m'as déjà demandé et je peux t'assurer qu'il s'est écoulé plusieurs minutes entre l'insertion de la clef et la commande sur le terminal
Comme le dit ajet, je pense que la mémoire sd est HS,
reste à savoir ce qu'il s'est passé...

Bonsoir.
C'est fort probable que la mémoire soit HS. Cependant je ne comprends pas que ubuntu puisse le savoir sans allez regarder.
Pour un dernier essai avant que j'abandonne.
1) Peux-tu enlever la carte SD. Attendre quelques minutes. Ou mieux un arrêt machine et un redémarrage (Cela nous permettra d'avoir un fichier LOG tout neuf).
2) Lorsque tout est bien stabilisé (5 minutes? ): Insérer la carte SD puis au bout de 10 secondes , faire le commande:
dmesg | tail - 250 Cette fois-ci, je remonte beaucoup plus en avant dans le temps.
et la faire parvenir. Si rien n'a changé, C'est un problème matériel: les connecteurs sont rouillés? ou ... la carte est HS ou....

Dernière modification par Bougron (Le 08/10/2014, à 22:02)

Compte anonymisé · Le 08/10/2014, à 22:04

Bougron a écrit :

NéoUbuntonien a écrit :
OK mais la première commande est celle que tu m'as déjà demandé et je peux t'assurer qu'il s'est écoulé plusieurs minutes entre l'insertion de la clef et la commande sur le terminal
Comme le dit ajet, je pense que la mémoire sd est HS,
reste à savoir ce qu'il s'est passé...
bonsoir
C'est fort probable que la mémoire soit HS. Cependant je ne comprends pas que ubuntu puisse le savoir sans allez regarder.
Pour un dernier essai avant que j'abandonne.
1) Peux-tu enlever la carte SD Attendre quelques minutes. Ou mieux un arrêt machine et un redémarrage (Cela nous permettra d'avoir un fichier LOG tout neuf).
2) Lorsque tout est bien stabilisé (5 minutes? ) Insérer la carte SD puis au bout de 10 secondes faire le commande
dmesg | tail - 250 Cette fois-ci, je remonte beaucoup plus en avant dans le temps.
et la faire parvenir. Si rien n'a changé , C'est un problème matériel: les connecteurs sont rouillés? ou ... la carte est HS ou....

Actuellement mon ordinateur est éteint (depuis 19h) je réessayerai demain
Si mes connecteurs sont rouillés alors que le PC n'a pas deux mois
De plus, Ubuntu est sur un DD à mémoire, il se charge en quelques seconde

Bougron · Le 08/10/2014, à 22:27

NéoUbuntonien a écrit :

Si mes connecteurs sont rouillés alors que le PC n'a pas deux mois
De plus, Ubuntu est sur un DD à mémoire, il se charge en quelques secondes

Je voulais simplement te dire que ne connaissant de ton histoire que ce que tu as résumé:
"Dessus, j'y ait installé une carte mémoire de 8Go pour libérer la mémoire interne qui était déjà au 3/4 pleine
Ayant besoins de cette carte, j'ai voulu la retirer, sauvegarder ce qu'elle contenait sur Ubuntu pour faire une sauvegarde, insérer cette sauvegarde dans une autre carte mémoire (16 Go) pour la réinsérer dans le téléphone
Je souhaitais récupérer celle de 8 Go car j'en ai besoin pour mon GPS qui visiblement à du mal à gérer ce qui est au dessus de cette capacité
je l'ai retiré non sans avoir cliquer sur "démonté la carte", éteint l'appareil, retirer la batterie puis retirer la carte
Le problème est que cette carte n'est pas reconnu du tout par Ubuntu, elle ne détecte même pas qu'une carte a été inséré
Pire encore, lorsque je la ré insert dans mon téléphone Samsung, celui-ci ne la reconnaît pas non plus bien"
Je me suis souvenu d'un événement personnel avec un verre de whisky renversé.
Je ne doute pas que ton micro mette en route rapidement, mais la trace montre comme dernier événement des connexions internet en cours de s'exécuter...
Si tu es d'accord, tu branches cette fameuse carte SD puis tu branches sur un autre port USB une clé USB.
La trace montrera alors le branchement de ce second périphérique et pas celui du premier périphérique.
Cela prouvera qu'il ne sait pas se faire reconnaître et qu'il peut finir sa vie à la poubelle..

Compte anonymisé · Le 09/10/2014, à 10:47

Je fais la commande inscrite en #13 et j’inscris ici le résultat (j'ai patienté cinq minutes entre le moment où j'ai inséré la clé et le moment où j'ai fait la commande) :

bruno@cd214289:~$ dmesg | tail -250
[    1.536884] usb 3-8: new full-speed USB device number 3 using xhci_hcd
[    1.556188] usb 3-8: New USB device found, idVendor=046d, idProduct=c52b
[    1.556190] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.556192] usb 3-8: Product: USB Receiver
[    1.556193] usb 3-8: Manufacturer: Logitech
[    1.559511] hidraw: raw HID events driver (C) Jiri Kosina
[    1.561190] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.567048] usbcore: registered new interface driver usbhid
[    1.567050] usbhid: USB HID core driver
[    1.656849] usb 3-2.1: new full-speed USB device number 4 using xhci_hcd
[    1.673901] usb 3-2.1: New USB device found, idVendor=04a9, idProduct=1072
[    1.673903] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.673904] usb 3-2.1: Product: i850
[    1.673906] usb 3-2.1: Manufacturer: Canon
[    1.673906] usb 3-2.1: SerialNumber: 100YMA
[    2.247553] Adding 3844092k swap on /dev/sda5.  Priority:-1 extents:1 across:3844092k SSFS
[    2.416635] Switched to clocksource tsc
[    3.109336] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    3.225544] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[    3.263748] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
[    3.309775] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[    3.345027] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    3.384169] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    3.386777] init: ureadahead-other main process (416) terminated with status 2
[    3.459571] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    3.461897] init: ureadahead-other main process (421) terminated with status 2
[    3.526495] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.540881] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.575139] systemd-udevd[455]: starting version 204
[    3.642105] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    3.659508] [drm] Initialized drm 1.1.0 20060810
[    3.673494] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    3.673501] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.673504] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    3.673506] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    3.673508] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.673509] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    3.673511] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    3.673513] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.673513] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.684151] cfg80211: Calling CRDA to update world regulatory domain
[    3.723239] [drm] Memory usable by graphics device = 2048M
[    3.723244] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[    3.723245] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    3.723260] Console: switching to colour dummy device 80x25
[    3.795240] ath: EEPROM regdomain: 0x809c
[    3.795243] ath: EEPROM indicates we should expect a country code
[    3.795244] ath: doing EEPROM country->regdmn map search
[    3.795245] ath: country maps to regdmn code: 0x52
[    3.795246] ath: Country alpha2 being used: CN
[    3.795247] ath: Regpair used: 0x52
[    3.812055] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    3.812066] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.812067] [drm] Driver supports precise vblank timestamp query.
[    3.812124] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.849629] fbcon: inteldrmfb (fb0) is primary device
[    3.890831] device-mapper: multipath: version 1.6.0 loaded
[    3.891521] lp: driver loaded but no devices found
[    3.893238] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.893522] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90004900000, irq=18
[    3.898312] type=1400 audit(1412842421.864:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=602 comm="apparmor_parser"
[    3.898316] type=1400 audit(1412842421.864:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[    3.898319] type=1400 audit(1412842421.864:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.898664] type=1400 audit(1412842421.864:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[    3.898668] type=1400 audit(1412842421.864:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.898845] type=1400 audit(1412842421.864:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.900905] ppdev: user-space parallel port driver
[    3.935580] Bluetooth: Core ver 2.17
[    3.935597] NET: Registered protocol family 31
[    3.935598] Bluetooth: HCI device and connection manager initialized
[    3.935604] Bluetooth: HCI socket layer initialized
[    3.935605] Bluetooth: L2CAP socket layer initialized
[    3.935609] Bluetooth: SCO socket layer initialized
[    3.949839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.949839] Bluetooth: BNEP filters: protocol multicast
[    3.949847] Bluetooth: BNEP socket layer initialized
[    3.965815] Bluetooth: RFCOMM TTY layer initialized
[    3.965823] Bluetooth: RFCOMM socket layer initialized
[    3.965827] Bluetooth: RFCOMM ver 1.11
[    3.983673] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input2
[    3.986545] input: Logitech Unifying Device. Wireless PID:401b as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:046D:C52B.0003/input/input5
[    3.986720] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:14.0-8:1
[    3.988324] input: Logitech Unifying Device. Wireless PID:4016 as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:046D:C52B.0003/input/input6
[    3.988509] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:14.0-8:2
[    3.993728] usblp 3-2.1:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1072
[    3.993754] usbcore: registered new interface driver usblp
[    4.015328] cfg80211: World regulatory domain updated:
[    4.015328] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.015329] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015330] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015330] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.015331] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015331] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015339] cfg80211: Calling CRDA for country: CN
[    4.031969] Console: switching to colour frame buffer device 128x48
[    4.033458] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.033459] i915 0000:00:02.0: registered panic notifier
[    4.042567] type=1400 audit(1412842422.008:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=789 comm="apparmor_parser"
[    4.042574] type=1400 audit(1412842422.008:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=789 comm="apparmor_parser"
[    4.042946] type=1400 audit(1412842422.008:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=789 comm="apparmor_parser"
[    4.054657] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.055264] acpi device:54: registered as cooling_device10
[    4.055311] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    4.055380] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.055623] HDA driver get symbol successfully from i915 module
[    4.055653] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
[    4.055764] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    4.075387] SKU: Nid=0x1d sku_cfg=0x4016f601
[    4.075391] SKU: port_connectivity=0x1
[    4.075391] SKU: enable_pcbeep=0x1
[    4.075392] SKU: check_sum=0x00000006
[    4.075393] SKU: customization=0x000000f6
[    4.075394] SKU: external_amp=0x0
[    4.075395] SKU: platform_type=0x0
[    4.075395] SKU: swap=0x0
[    4.075396] SKU: override=0x1
[    4.075838] autoconfig: line_outs=4 (0x14/0x15/0x16/0x18/0x0) type:line
[    4.075840]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.075841]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.075842]    mono: mono_out=0x0
[    4.075843]    dig-out=0x11/0x1e
[    4.075844]    inputs:
[    4.075845]      Mic=0x19
[    4.075846]      Line=0x1a
[    4.075847] realtek: No valid SSID, checking pincfg 0x4016f601 for NID 0x1d
[    4.075849] realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0892
[    4.079078] cfg80211: Regulatory domain changed to country: CN
[    4.079081] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.079082] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.079084] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[    4.079085] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[    4.079086] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[    4.079087] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[    4.079844] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[    4.080053] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[    4.094723] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    4.095096] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    4.095160] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    4.095216] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    4.095271] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    4.095324] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    4.095380] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    4.133040] init: cups main process (792) killed by HUP signal
[    4.133049] init: cups main process ended, respawning
[    4.155624] init: failsafe main process (824) killed by TERM signal
[    4.441231] init: samba-ad-dc main process (1007) terminated with status 1
[    4.515881] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    4.619744] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    4.619833] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.620037] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.638150] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    4.641119] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.028575] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
[    5.475768] [Privé]
[    5.479340] init: plymouth-upstart-bridge main process ended, respawning
[    5.495231] [Privé]
[    5.507331] wlan0: authenticated
[    5.511399] [Privé]
[    5.523840] [Privé]
[    5.523888] wlan0: associated
[    5.523905] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    5.779396] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    7.503226] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[    7.505041] vboxdrv: Found 4 processor cores.
[    7.505294] vboxdrv: fAsync=0 offMin=0x219 offMax=0xa9b
[    7.505356] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    7.505358] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[    7.514532] vboxpci: IOMMU not found (not registered)
[    8.669250] init: plymouth-stop pre-start process (2475) terminated with status 1
[   34.089635] audit_printk_skb: 165 callbacks suppressed
[   34.089638] type=1400 audit(1412842452.063:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2813 comm="apparmor_parser"
[   34.089641] type=1400 audit(1412842452.063:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2813 comm="apparmor_parser"
[   34.089873] type=1400 audit(1412842452.063:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2813 comm="apparmor_parser"
[ 1703.317978] cfg80211: Calling CRDA to update world regulatory domain
[ 1703.327385] cfg80211: World regulatory domain updated:
[ 1703.327395] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1703.327402] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327409] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327415] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1703.327420] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327425] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1709.899600] [Privé]
[ 1709.926731] [Privé]
[ 1709.928657] wlan0: authenticated
[ 1709.931287] [Privé]
[ 1709.940425] [Privé]
[ 1709.940458] wlan0: associated
[ 1823.402099] type=1400 audit(1412844241.944:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4241 comm="apparmor_parser"
[ 1823.402106] type=1400 audit(1412844241.944:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4241 comm="apparmor_parser"
[ 1823.402501] type=1400 audit(1412844241.948:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4241 comm="apparmor_parser"
[ 2199.474375] usb 3-7: new high-speed USB device number 5 using xhci_hcd
[ 2199.491338] usb 3-7: New USB device found, idVendor=14cd, idProduct=125b
[ 2199.491346] usb 3-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2199.491351] usb 3-7: Product:  AutoRUN/Partition 
[ 2199.491355] usb 3-7: Manufacturer:  Generic 
[ 2199.491358] usb 3-7: SerialNumber: 125B20100804
[ 2199.518658] usb-storage 3-7:1.0: USB Mass Storage device detected
[ 2199.518768] scsi5 : usb-storage 3-7:1.0
[ 2199.518814] usbcore: registered new interface driver usb-storage
[ 2201.491840] scsi 5:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 2201.492168] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2201.515288] sd 5:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 2201.515491] sd 5:0:0:0: [sdd] Write Protect is off
[ 2201.515493] sd 5:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 2201.515622] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.515624] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.516521] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.516523] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.522992]  sdd: sdd1
[ 2201.522999] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 2201.523622] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.523627] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.529935]  sdd: sdd1
[ 2201.529939] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2201.530644] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.530647] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.530649] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 2201.766961] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2201.837337] systemd-hostnamed[4446]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2373.891408] sdd: detected capacity change from 31499222528 to 0
[ 2379.760606] usb 3-7: USB disconnect, device number 5
[ 2387.494390] usb 3-5: new high-speed USB device number 6 using xhci_hcd
[ 2387.511622] usb 3-5: New USB device found, idVendor=14cd, idProduct=125b
[ 2387.511631] usb 3-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2387.511635] usb 3-5: Product:  AutoRUN/Partition 
[ 2387.511639] usb 3-5: Manufacturer:  Generic 
[ 2387.511643] usb 3-5: SerialNumber: 125B20100804
[ 2387.512269] usb-storage 3-5:1.0: USB Mass Storage device detected
[ 2387.512430] scsi6 : usb-storage 3-5:1.0
[ 2389.511855] scsi 6:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 2389.512091] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2389.535397] sd 6:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 2389.535572] sd 6:0:0:0: [sdd] Write Protect is off
[ 2389.535575] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 2389.535707] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.535710] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.537811] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.537819] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.544364]  sdd: sdd1
[ 2389.544382] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 2389.544904] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.544906] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551136]  sdd: sdd1
[ 2389.551150] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2389.551945] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.551947] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551949] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2389.774230] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2479.592442] sdd: detected capacity change from 31499222528 to 0
[ 2486.473779] usb 3-5: USB disconnect, device number 6
bruno@cd214289:~$

bruno@cd214289:~$ sudo fdisk -l
[sudo] password for bruno: 

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 têtes, 63 secteurs/piste, 30401 cylindres, total 488397168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x000678a7

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1   *        2048   480706559   240352256   83  Linux
/dev/sda2       480708606   488396799     3844097    5  Étendue
/dev/sda5       480708608   488396799     3844096   82  partition d'échange Linux / Solaris

Disk /dev/sdb: 320.1 GB, 320072933376 bytes
255 têtes, 63 secteurs/piste, 38913 cylindres, total 625142448 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xc565c565

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1              63   208379966   104189952   83  Linux
/dev/sdb2       208381952   416761855   104189952   83  Linux
/dev/sdb3       416761856   625141759   104189952   83  Linux

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdc » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Identifiant de disque : 0x00000000

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdc1               1  1953525167   976762583+  ee  GPT
La partition 1 ne commence pas sur une frontière de cylindre physique.
bruno@cd214289:~$

bruno@cd214289:~$ lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Device 041e (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation H87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
bruno@cd214289:~$

bruno@cd214289:~$ sudo lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Device 041e (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation H87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
bruno@cd214289:~$

PS : Modifié suite aux remarques de ajet en #17

Dernière modification par NéoUbuntonien (Le 10/10/2014, à 13:33)

αjet · Le 09/10/2014, à 10:55

NéoUbuntonien a écrit :

Je fais la commande inscrite en #13 et j’inscris ici le résultat (j'ai patienté cinq minutes entre le moment où j'ai inséré la clé et le moment où j'ai fait la commande) :
bruno@cd214289:~$ dmesg | tail - 250

Tu as mal lu le post #13. Il te demandais d'attendre environ 10 secondes entre l'insertion de la carte et l'impression de dmsg. Par ailleurs la commande s'execute pas bien car il ne faut pas d'espace entre - et 250. La syntaxe est :

dmesg | tail -250

Compte anonymisé · Le 09/10/2014, à 10:57

Bougron a écrit :

[...]
Si tu es d'accord, tu branches cette fameuse carte SD puis tu branches sur un autre port USB une clé USB.
La trace montrera alors le branchement de ce second périphérique et pas celui du premier périphérique.
Cela prouvera qu'il ne sait pas se faire reconnaître et qu'il peut finir sa vie à la poubelle..

Voici

bruno@cd214289:~$ dmesg | tail -250
[    3.575139] systemd-udevd[455]: starting version 204
[    3.642105] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    3.659508] [drm] Initialized drm 1.1.0 20060810
[    3.673494] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    3.673501] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.673504] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    3.673506] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    3.673508] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.673509] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    3.673511] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    3.673513] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.673513] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.684151] cfg80211: Calling CRDA to update world regulatory domain
[    3.723239] [drm] Memory usable by graphics device = 2048M
[    3.723244] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[    3.723245] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    3.723260] Console: switching to colour dummy device 80x25
[    3.795240] ath: EEPROM regdomain: 0x809c
[    3.795243] ath: EEPROM indicates we should expect a country code
[    3.795244] ath: doing EEPROM country->regdmn map search
[    3.795245] ath: country maps to regdmn code: 0x52
[    3.795246] ath: Country alpha2 being used: CN
[    3.795247] ath: Regpair used: 0x52
[    3.812055] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    3.812066] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.812067] [drm] Driver supports precise vblank timestamp query.
[    3.812124] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.849629] fbcon: inteldrmfb (fb0) is primary device
[    3.890831] device-mapper: multipath: version 1.6.0 loaded
[    3.891521] lp: driver loaded but no devices found
[    3.893238] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.893522] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90004900000, irq=18
[    3.898312] type=1400 audit(1412842421.864:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=602 comm="apparmor_parser"
[    3.898316] type=1400 audit(1412842421.864:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[    3.898319] type=1400 audit(1412842421.864:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.898664] type=1400 audit(1412842421.864:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[    3.898668] type=1400 audit(1412842421.864:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.898845] type=1400 audit(1412842421.864:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.900905] ppdev: user-space parallel port driver
[    3.935580] Bluetooth: Core ver 2.17
[    3.935597] NET: Registered protocol family 31
[    3.935598] Bluetooth: HCI device and connection manager initialized
[    3.935604] Bluetooth: HCI socket layer initialized
[    3.935605] Bluetooth: L2CAP socket layer initialized
[    3.935609] Bluetooth: SCO socket layer initialized
[    3.949839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.949839] Bluetooth: BNEP filters: protocol multicast
[    3.949847] Bluetooth: BNEP socket layer initialized
[    3.965815] Bluetooth: RFCOMM TTY layer initialized
[    3.965823] Bluetooth: RFCOMM socket layer initialized
[    3.965827] Bluetooth: RFCOMM ver 1.11
[    3.983673] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input2
[    3.986545] input: Logitech Unifying Device. Wireless PID:401b as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:046D:C52B.0003/input/input5
[    3.986720] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:14.0-8:1
[    3.988324] input: Logitech Unifying Device. Wireless PID:4016 as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:046D:C52B.0003/input/input6
[    3.988509] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:14.0-8:2
[    3.993728] usblp 3-2.1:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1072
[    3.993754] usbcore: registered new interface driver usblp
[    4.015328] cfg80211: World regulatory domain updated:
[    4.015328] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.015329] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015330] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015330] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.015331] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015331] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015339] cfg80211: Calling CRDA for country: CN
[    4.031969] Console: switching to colour frame buffer device 128x48
[    4.033458] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.033459] i915 0000:00:02.0: registered panic notifier
[    4.042567] type=1400 audit(1412842422.008:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=789 comm="apparmor_parser"
[    4.042574] type=1400 audit(1412842422.008:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=789 comm="apparmor_parser"
[    4.042946] type=1400 audit(1412842422.008:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=789 comm="apparmor_parser"
[    4.054657] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.055264] acpi device:54: registered as cooling_device10
[    4.055311] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    4.055380] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.055623] HDA driver get symbol successfully from i915 module
[    4.055653] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
[    4.055764] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    4.075387] SKU: Nid=0x1d sku_cfg=0x4016f601
[    4.075391] SKU: port_connectivity=0x1
[    4.075391] SKU: enable_pcbeep=0x1
[    4.075392] SKU: check_sum=0x00000006
[    4.075393] SKU: customization=0x000000f6
[    4.075394] SKU: external_amp=0x0
[    4.075395] SKU: platform_type=0x0
[    4.075395] SKU: swap=0x0
[    4.075396] SKU: override=0x1
[    4.075838] autoconfig: line_outs=4 (0x14/0x15/0x16/0x18/0x0) type:line
[    4.075840]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.075841]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.075842]    mono: mono_out=0x0
[    4.075843]    dig-out=0x11/0x1e
[    4.075844]    inputs:
[    4.075845]      Mic=0x19
[    4.075846]      Line=0x1a
[    4.075847] realtek: No valid SSID, checking pincfg 0x4016f601 for NID 0x1d
[    4.075849] realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0892
[    4.079078] cfg80211: Regulatory domain changed to country: CN
[    4.079081] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.079082] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.079084] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[    4.079085] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[    4.079086] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[    4.079087] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[    4.079844] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[    4.080053] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[    4.094723] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    4.095096] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    4.095160] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    4.095216] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    4.095271] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    4.095324] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    4.095380] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    4.133040] init: cups main process (792) killed by HUP signal
[    4.133049] init: cups main process ended, respawning
[    4.155624] init: failsafe main process (824) killed by TERM signal
[    4.441231] init: samba-ad-dc main process (1007) terminated with status 1
[    4.515881] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    4.619744] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    4.619833] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.620037] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.638150] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    4.641119] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.028575] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
[Privé]
[    5.479340] init: plymouth-upstart-bridge main process ended, respawning
[    5.495231] [Privé]
[    5.507331] wlan0: authenticated
[    5.511399] [Privé]
[    5.523840] [Privé]
[    5.523888] wlan0: associated
[    5.523905] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    5.779396] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    7.503226] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[    7.505041] vboxdrv: Found 4 processor cores.
[    7.505294] vboxdrv: fAsync=0 offMin=0x219 offMax=0xa9b
[    7.505356] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    7.505358] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[    7.514532] vboxpci: IOMMU not found (not registered)
[    8.669250] init: plymouth-stop pre-start process (2475) terminated with status 1
[   34.089635] audit_printk_skb: 165 callbacks suppressed
[   34.089638] type=1400 audit(1412842452.063:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2813 comm="apparmor_parser"
[   34.089641] type=1400 audit(1412842452.063:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2813 comm="apparmor_parser"
[   34.089873] type=1400 audit(1412842452.063:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2813 comm="apparmor_parser"
[ 1703.317978] cfg80211: Calling CRDA to update world regulatory domain
[ 1703.327385] cfg80211: World regulatory domain updated:
[ 1703.327395] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1703.327402] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327409] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327415] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1703.327420] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327425] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1709.899600] [Privé]
[ 1709.926731] [Privé]
[ 1709.928657] wlan0: authenticated
[ 1709.931287] [Privé]
[ 1709.940425] [Privé]
[ 1709.940458] wlan0: associated
[ 1823.402099] type=1400 audit(1412844241.944:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4241 comm="apparmor_parser"
[ 1823.402106] type=1400 audit(1412844241.944:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4241 comm="apparmor_parser"
[ 1823.402501] type=1400 audit(1412844241.948:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4241 comm="apparmor_parser"
[ 2199.474375] usb 3-7: new high-speed USB device number 5 using xhci_hcd
[ 2199.491338] usb 3-7: New USB device found, idVendor=14cd, idProduct=125b
[ 2199.491346] usb 3-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2199.491351] usb 3-7: Product:  AutoRUN/Partition 
[ 2199.491355] usb 3-7: Manufacturer:  Generic 
[ 2199.491358] usb 3-7: SerialNumber: 125B20100804
[ 2199.518658] usb-storage 3-7:1.0: USB Mass Storage device detected
[ 2199.518768] scsi5 : usb-storage 3-7:1.0
[ 2199.518814] usbcore: registered new interface driver usb-storage
[ 2201.491840] scsi 5:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 2201.492168] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2201.515288] sd 5:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 2201.515491] sd 5:0:0:0: [sdd] Write Protect is off
[ 2201.515493] sd 5:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 2201.515622] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.515624] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.516521] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.516523] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.522992]  sdd: sdd1
[ 2201.522999] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 2201.523622] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.523627] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.529935]  sdd: sdd1
[ 2201.529939] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2201.530644] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.530647] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.530649] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 2201.766961] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2201.837337] systemd-hostnamed[4446]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2373.891408] sdd: detected capacity change from 31499222528 to 0
[ 2379.760606] usb 3-7: USB disconnect, device number 5
[ 2387.494390] usb 3-5: new high-speed USB device number 6 using xhci_hcd
[ 2387.511622] usb 3-5: New USB device found, idVendor=14cd, idProduct=125b
[ 2387.511631] usb 3-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2387.511635] usb 3-5: Product:  AutoRUN/Partition 
[ 2387.511639] usb 3-5: Manufacturer:  Generic 
[ 2387.511643] usb 3-5: SerialNumber: 125B20100804
[ 2387.512269] usb-storage 3-5:1.0: USB Mass Storage device detected
[ 2387.512430] scsi6 : usb-storage 3-5:1.0
[ 2389.511855] scsi 6:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 2389.512091] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2389.535397] sd 6:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 2389.535572] sd 6:0:0:0: [sdd] Write Protect is off
[ 2389.535575] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 2389.535707] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.535710] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.537811] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.537819] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.544364]  sdd: sdd1
[ 2389.544382] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 2389.544904] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.544906] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551136]  sdd: sdd1
[ 2389.551150] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2389.551945] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.551947] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551949] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2389.774230] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2479.592442] sdd: detected capacity change from 31499222528 to 0
[ 2486.473779] usb 3-5: USB disconnect, device number 6
[ 3005.386979] usb 3-5: new high-speed USB device number 7 using xhci_hcd
[ 3005.404162] usb 3-5: New USB device found, idVendor=14cd, idProduct=125b
[ 3005.404171] usb 3-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 3005.404176] usb 3-5: Product:  AutoRUN/Partition 
[ 3005.404180] usb 3-5: Manufacturer:  Generic 
[ 3005.404184] usb 3-5: SerialNumber: 125B20100804
[ 3005.404849] usb-storage 3-5:1.0: USB Mass Storage device detected
[ 3005.405004] scsi7 : usb-storage 3-5:1.0
[ 3007.404489] scsi 7:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 3007.404736] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 3007.427825] sd 7:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 3007.427942] sd 7:0:0:0: [sdd] Write Protect is off
[ 3007.427943] sd 7:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 3007.428066] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3007.428068] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3007.429193] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3007.429195] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3007.435706]  sdd: sdd1
[ 3007.435721] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 3007.436328] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3007.436330] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3007.442590]  sdd: sdd1
[ 3007.442595] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 3007.443408] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3007.443412] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3007.443414] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 3007.671469] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3007.745495] systemd-hostnamed[24150]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
bruno@cd214289:~$

avec changement de port USB

bruno@cd214289:~$ dmesg | tail -250
[    3.891521] lp: driver loaded but no devices found
[    3.893238] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.893522] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90004900000, irq=18
[    3.898312] type=1400 audit(1412842421.864:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=602 comm="apparmor_parser"
[    3.898316] type=1400 audit(1412842421.864:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[    3.898319] type=1400 audit(1412842421.864:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.898664] type=1400 audit(1412842421.864:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[    3.898668] type=1400 audit(1412842421.864:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.898845] type=1400 audit(1412842421.864:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[    3.900905] ppdev: user-space parallel port driver
[    3.935580] Bluetooth: Core ver 2.17
[    3.935597] NET: Registered protocol family 31
[    3.935598] Bluetooth: HCI device and connection manager initialized
[    3.935604] Bluetooth: HCI socket layer initialized
[    3.935605] Bluetooth: L2CAP socket layer initialized
[    3.935609] Bluetooth: SCO socket layer initialized
[    3.949839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.949839] Bluetooth: BNEP filters: protocol multicast
[    3.949847] Bluetooth: BNEP socket layer initialized
[    3.965815] Bluetooth: RFCOMM TTY layer initialized
[    3.965823] Bluetooth: RFCOMM socket layer initialized
[    3.965827] Bluetooth: RFCOMM ver 1.11
[    3.983673] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input2
[    3.986545] input: Logitech Unifying Device. Wireless PID:401b as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:046D:C52B.0003/input/input5
[    3.986720] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:14.0-8:1
[    3.988324] input: Logitech Unifying Device. Wireless PID:4016 as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:046D:C52B.0003/input/input6
[    3.988509] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:14.0-8:2
[    3.993728] usblp 3-2.1:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1072
[    3.993754] usbcore: registered new interface driver usblp
[    4.015328] cfg80211: World regulatory domain updated:
[    4.015328] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.015329] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015330] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015330] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.015331] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015331] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.015339] cfg80211: Calling CRDA for country: CN
[    4.031969] Console: switching to colour frame buffer device 128x48
[    4.033458] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.033459] i915 0000:00:02.0: registered panic notifier
[    4.042567] type=1400 audit(1412842422.008:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=789 comm="apparmor_parser"
[    4.042574] type=1400 audit(1412842422.008:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=789 comm="apparmor_parser"
[    4.042946] type=1400 audit(1412842422.008:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=789 comm="apparmor_parser"
[    4.054657] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.055264] acpi device:54: registered as cooling_device10
[    4.055311] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    4.055380] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.055623] HDA driver get symbol successfully from i915 module
[    4.055653] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
[    4.055764] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    4.075387] SKU: Nid=0x1d sku_cfg=0x4016f601
[    4.075391] SKU: port_connectivity=0x1
[    4.075391] SKU: enable_pcbeep=0x1
[    4.075392] SKU: check_sum=0x00000006
[    4.075393] SKU: customization=0x000000f6
[    4.075394] SKU: external_amp=0x0
[    4.075395] SKU: platform_type=0x0
[    4.075395] SKU: swap=0x0
[    4.075396] SKU: override=0x1
[    4.075838] autoconfig: line_outs=4 (0x14/0x15/0x16/0x18/0x0) type:line
[    4.075840]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.075841]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.075842]    mono: mono_out=0x0
[    4.075843]    dig-out=0x11/0x1e
[    4.075844]    inputs:
[    4.075845]      Mic=0x19
[    4.075846]      Line=0x1a
[    4.075847] realtek: No valid SSID, checking pincfg 0x4016f601 for NID 0x1d
[    4.075849] realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0892
[    4.079078] cfg80211: Regulatory domain changed to country: CN
[    4.079081] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.079082] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.079084] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[    4.079085] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[    4.079086] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[    4.079087] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[    4.079844] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[    4.080053] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[    4.094723] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    4.095096] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    4.095160] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    4.095216] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    4.095271] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    4.095324] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    4.095380] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    4.133040] init: cups main process (792) killed by HUP signal
[    4.133049] init: cups main process ended, respawning
[    4.155624] init: failsafe main process (824) killed by TERM signal
[    4.441231] init: samba-ad-dc main process (1007) terminated with status 1
[    4.515881] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    4.619744] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    4.619833] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.620037] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.638150] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    4.641119] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.028575] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
[    5.475768] [Privé]
[    5.479340] init: plymouth-upstart-bridge main process ended, respawning
[    5.495231] [Privé]
[    5.507331] wlan0: authenticated
[    5.511399] [Privé]
[    5.523840] [Privé]
[    5.523888] wlan0: associated
[    5.523905] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    5.779396] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    7.503226] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[    7.505041] vboxdrv: Found 4 processor cores.
[    7.505294] vboxdrv: fAsync=0 offMin=0x219 offMax=0xa9b
[    7.505356] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    7.505358] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[    7.514532] vboxpci: IOMMU not found (not registered)
[    8.669250] init: plymouth-stop pre-start process (2475) terminated with status 1
[   34.089635] audit_printk_skb: 165 callbacks suppressed
[   34.089638] type=1400 audit(1412842452.063:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2813 comm="apparmor_parser"
[   34.089641] type=1400 audit(1412842452.063:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2813 comm="apparmor_parser"
[   34.089873] type=1400 audit(1412842452.063:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2813 comm="apparmor_parser"
[ 1703.317978] cfg80211: Calling CRDA to update world regulatory domain
[ 1703.327385] cfg80211: World regulatory domain updated:
[ 1703.327395] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1703.327402] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327409] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327415] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1703.327420] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1703.327425] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1709.899600] [Privé]
[ 1709.926731] [Privé]
[ 1709.928657] wlan0: authenticated
[ 1709.931287] [Privé]
[ 1709.940425] [Privé]
[ 1709.940458] wlan0: associated
[ 1823.402099] type=1400 audit(1412844241.944:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4241 comm="apparmor_parser"
[ 1823.402106] type=1400 audit(1412844241.944:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4241 comm="apparmor_parser"
[ 1823.402501] type=1400 audit(1412844241.948:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4241 comm="apparmor_parser"
[ 2199.474375] usb 3-7: new high-speed USB device number 5 using xhci_hcd
[ 2199.491338] usb 3-7: New USB device found, idVendor=14cd, idProduct=125b
[ 2199.491346] usb 3-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2199.491351] usb 3-7: Product:  AutoRUN/Partition 
[ 2199.491355] usb 3-7: Manufacturer:  Generic 
[ 2199.491358] usb 3-7: SerialNumber: 125B20100804
[ 2199.518658] usb-storage 3-7:1.0: USB Mass Storage device detected
[ 2199.518768] scsi5 : usb-storage 3-7:1.0
[ 2199.518814] usbcore: registered new interface driver usb-storage
[ 2201.491840] scsi 5:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 2201.492168] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2201.515288] sd 5:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 2201.515491] sd 5:0:0:0: [sdd] Write Protect is off
[ 2201.515493] sd 5:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 2201.515622] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.515624] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.516521] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.516523] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.522992]  sdd: sdd1
[ 2201.522999] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 2201.523622] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.523627] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.529935]  sdd: sdd1
[ 2201.529939] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2201.530644] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.530647] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.530649] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 2201.766961] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2201.837337] systemd-hostnamed[4446]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2373.891408] sdd: detected capacity change from 31499222528 to 0
[ 2379.760606] usb 3-7: USB disconnect, device number 5
[ 2387.494390] usb 3-5: new high-speed USB device number 6 using xhci_hcd
[ 2387.511622] usb 3-5: New USB device found, idVendor=14cd, idProduct=125b
[ 2387.511631] usb 3-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2387.511635] usb 3-5: Product:  AutoRUN/Partition 
[ 2387.511639] usb 3-5: Manufacturer:  Generic 
[ 2387.511643] usb 3-5: SerialNumber: 125B20100804
[ 2387.512269] usb-storage 3-5:1.0: USB Mass Storage device detected
[ 2387.512430] scsi6 : usb-storage 3-5:1.0
[ 2389.511855] scsi 6:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 2389.512091] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2389.535397] sd 6:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 2389.535572] sd 6:0:0:0: [sdd] Write Protect is off
[ 2389.535575] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 2389.535707] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.535710] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.537811] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.537819] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.544364]  sdd: sdd1
[ 2389.544382] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 2389.544904] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.544906] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551136]  sdd: sdd1
[ 2389.551150] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2389.551945] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.551947] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551949] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2389.774230] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2479.592442] sdd: detected capacity change from 31499222528 to 0
[ 2486.473779] usb 3-5: USB disconnect, device number 6
[ 3005.386979] usb 3-5: new high-speed USB device number 7 using xhci_hcd
[ 3005.404162] usb 3-5: New USB device found, idVendor=14cd, idProduct=125b
[ 3005.404171] usb 3-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 3005.404176] usb 3-5: Product:  AutoRUN/Partition 
[ 3005.404180] usb 3-5: Manufacturer:  Generic 
[ 3005.404184] usb 3-5: SerialNumber: 125B20100804
[ 3005.404849] usb-storage 3-5:1.0: USB Mass Storage device detected
[ 3005.405004] scsi7 : usb-storage 3-5:1.0
[ 3007.404489] scsi 7:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 3007.404736] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 3007.427825] sd 7:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 3007.427942] sd 7:0:0:0: [sdd] Write Protect is off
[ 3007.427943] sd 7:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 3007.428066] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3007.428068] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3007.429193] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3007.429195] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3007.435706]  sdd: sdd1
[ 3007.435721] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 3007.436328] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3007.436330] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3007.442590]  sdd: sdd1
[ 3007.442595] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 3007.443408] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3007.443412] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3007.443414] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 3007.671469] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3007.745495] systemd-hostnamed[24150]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 3109.768605] sdd: detected capacity change from 31499222528 to 0
[ 3119.795495] usb 3-5: USB disconnect, device number 7
[ 3130.333755] usb 3-7: new high-speed USB device number 8 using xhci_hcd
[ 3130.350901] usb 3-7: New USB device found, idVendor=14cd, idProduct=125b
[ 3130.350904] usb 3-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 3130.350905] usb 3-7: Product:  AutoRUN/Partition 
[ 3130.350907] usb 3-7: Manufacturer:  Generic 
[ 3130.350907] usb 3-7: SerialNumber: 125B20100804
[ 3130.351362] usb-storage 3-7:1.0: USB Mass Storage device detected
[ 3130.351416] scsi8 : usb-storage 3-7:1.0
[ 3132.351225] scsi 8:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 3132.351474] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 3132.374818] sd 8:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 3132.374991] sd 8:0:0:0: [sdd] Write Protect is off
[ 3132.374997] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 3132.375162] sd 8:0:0:0: [sdd] No Caching mode page found
[ 3132.375167] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 3132.377588] sd 8:0:0:0: [sdd] No Caching mode page found
[ 3132.377592] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 3132.384023]  sdd: sdd1
[ 3132.384039] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 3132.384534] sd 8:0:0:0: [sdd] No Caching mode page found
[ 3132.384536] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 3132.390694]  sdd: sdd1
[ 3132.390701] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 3132.391497] sd 8:0:0:0: [sdd] No Caching mode page found
[ 3132.391499] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 3132.391501] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 3132.628491] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
bruno@cd214289:~$

Conclusion...

PS : Modifié suite aux remarques de ajet en #17

Dernière modification par NéoUbuntonien (Le 10/10/2014, à 13:29)

Compte anonymisé · Le 09/10/2014, à 11:14

αjet a écrit :

NéoUbuntonien a écrit :
Je fais la commande inscrite en #13 et j’inscris ici le résultat (j'ai patienté cinq minutes entre le moment où j'ai inséré la clé et le moment où j'ai fait la commande) :
bruno@cd214289:~$ dmesg | tail - 250
Tu as mal lu le post #13. Il te demandais d'attendre environ 10 secondes entre l'insertion de la carte et l'impression de dmsg. Par ailleurs la commande s'execute pas bien car il ne faut pas d'espace entre - et 250. La syntaxe est :
dmesg | tail -250

Non, j'ai préféré attendre 5 minutes pour être sûr
J'ai pris en compte ta remarque et refais le test, merci

Bougron · Le 09/10/2014, à 13:00

NéoUbuntonien a écrit :

Je fais la commande inscrite en #13 et j’inscris ici le résultat (j'ai patienté cinq minutes entre le moment où j'ai inséré la clé et le moment où j'ai fait la commande) :

bruno@cd214289:~$ dmesg | tail -250

[ 2199.491338] usb 3-7: New USB device found, idVendor=14cd, idProduct=125b
[ 2199.491346] usb 3-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2199.491351] usb 3-7: Product:  AutoRUN/Partition 
[ 2199.491355] usb 3-7: Manufacturer:  Generic 
[ 2199.491358] usb 3-7: SerialNumber: 125B20100804
[ 2199.518658] usb-storage 3-7:1.0: USB Mass Storage device detected
[ 2199.518768] scsi5 : usb-storage 3-7:1.0
[ 2199.518814] usbcore: registered new interface driver usb-storage
[ 2201.491840] scsi 5:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 2201.492168] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2201.515288] sd 5:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 2201.515491] sd 5:0:0:0: [sdd] Write Protect is off
[ 2201.515493] sd 5:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 2201.515622] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.515624] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.516521] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.516523] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.522992]  sdd: sdd1
[ 2201.522999] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 2201.523622] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.523627] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.529935]  sdd: sdd1
[ 2201.529939] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2201.530644] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2201.530647] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2201.530649] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 2201.766961] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2201.837337] systemd-hostnamed[4446]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2373.891408] sdd: detected capacity change from 31499222528 to 0
[ 2379.760606] usb 3-7: USB disconnect, device number 5
[ 2387.494390] usb 3-5: new high-speed USB device number 6 using xhci_hcd
[ 2387.511622] usb 3-5: New USB device found, idVendor=14cd, idProduct=125b
[ 2387.511631] usb 3-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2387.511635] usb 3-5: Product:  AutoRUN/Partition 
[ 2387.511639] usb 3-5: Manufacturer:  Generic 
[ 2387.511643] usb 3-5: SerialNumber: 125B20100804
[ 2387.512269] usb-storage 3-5:1.0: USB Mass Storage device detected
[ 2387.512430] scsi6 : usb-storage 3-5:1.0
[ 2389.511855] scsi 6:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
[ 2389.512091] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2389.535397] sd 6:0:0:0: [sdd] 61521919 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 2389.535572] sd 6:0:0:0: [sdd] Write Protect is off
[ 2389.535575] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 2389.535707] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.535710] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.537811] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.537819] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.544364]  sdd: sdd1
[ 2389.544382] sdd: p1 size 61513728 extends beyond EOD, enabling native capacity
[ 2389.544904] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.544906] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551136]  sdd: sdd1
[ 2389.551150] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2389.551945] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.551947] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551949] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2389.774230][u] FAT-fs [/u](sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2479.592442] sdd: detected capacity change from 31499222528 to 0
[ 2486.473779] usb 3-5: USB disconnect, device number 6

Bonjour.
Merci de nous avoir fait parvenir le résultat du montage. Comme j'avais pris large, J'ai éliminé les lignes qui n'ont pas de rapport. et conservé celles qui sont utiles...

J'extrais la cause du non fonctionnement. Elle est très claire.
Pour le moment, Je n'ai aucune idée de la façon de résoudre avec ubuntu.

================> Voir le post#2 qui est la réponse si tu n'as pas installé ce logiciel
sinon Je vais quand même regarder les options FSCK que je ne connais pas
https://doc.ubuntu-fr.org/fsck
===============> connecter la carte SD puis
fsck /dev/sdd1
ou sudo fsck /dev/sdd1

[ 2389.551136] sdd: sdd1
[ 2389.551150] sdd: p1 size 61513728 extends beyond EOD, truncated
[ 2389.551945] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2389.551947] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2389.551949] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2389.774230] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2479.592442] sdd: detected capacity change from 31499222528 to 0
[ 2486.473779] usb 3-5: USB disconnect, device number 6

Dernière modification par Bougron (Le 09/10/2014, à 13:22)

Compte anonymisé · Le 09/10/2014, à 13:11

voila ce que j'ai tenté et ça réponse

bruno@cd214289:~$ fsck -a /dev/sdd1
fsck de util-linux 2.20.1
fsck.ext2: Aucun fichier ou dossier de ce type lors de la tentative d'ouverture de /dev/sdd1
Périphérique peut-être inexistant ?
bruno@cd214289:~$

αjet · Le 09/10/2014, à 13:18

Je doute que cette partition soit une ext*, c'est probablement une partition fat32 ou exFAT.
Je viens de trouver ce lien (en anglais) pour fat32:
http://askubuntu.com/questions/147228/h … ile-system

Si tu as installe les paquets pour exfat, il y a exfatfsck qui te permet de lister les erreur mais malheureusement pas de les fixer.
http://manpages.ubuntu.com/manpages/sau … fat.8.html

Bougron · Le 09/10/2014, à 13:33

C'est une certitude C'est du fat-fs (fs-fat) [ 2389.774230] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Doc probablement Pour le système de fichier FAT, se référer à la page dosfsck. https://doc.ubuntu-fr.org/dosfsck
Il vous suffit, pour cela, d'installer le paquet dosfstools => il est possible que ce paquet soit déjà installé

On peut ensuite lancer la vérification et la réparation :
sudo dosfsck -t -a -w /dev/sdd1

Compte anonymisé · Le 09/10/2014, à 13:34

bruno@cd214289:~$ sudo dosfsck -w -r -l -a -v -t /dev/sdd1
fsck.fat 3.0.26 (2014-03-07)
fsck.fat 3.0.26 (2014-03-07)
open: Aucun fichier ou dossier de ce type
bruno@cd214289:~$

bruno@cd214289:~$ fsck.vfat -r /dev/sdd1
fsck.fat 3.0.26 (2014-03-07)
open: Aucun fichier ou dossier de ce type
bruno@cd214289:~$

bruno@cd214289:~$ sudo exfatfsck -v /dev/sdd1
exfatfsck 1.0.1
Copyright (C) 2011-2013  Andrew Nayenko
bruno@cd214289:~$ sudo exfatfsck /dev/sdd1
exfatfsck 1.0.1
ERROR: failed to open `/dev/sdd1' in read-only mode.
bruno@cd214289:~$

On s'approche du problème
ERROR: failed to open `/dev/sdd1' in read-only mode.

Bougron · Le 09/10/2014, à 14:16

Pas sur du tout, je viens de faire

bougron@S70t-A:~$ sudo exfatfsck /dev/GrosBug
exfatfsck 1.0.1
ERROR: failed to open `/dev/GrosBug' in read-only mode.
bougron@S70t-A:~$
bougron@S70t-A:~$ sudo exfatfsck help
exfatfsck 1.0.1
ERROR: failed to open `help' in read-only mode.
bougron@S70t-A:~$

AJout De plus la trace de montage n'indique pas ce problème [ 2201.515491] sd 5:0:0:0: [sdd] Write Protect is off

Dernière modification par Bougron (Le 09/10/2014, à 15:01)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 08/10/2014, à 16:20

[Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#2 Le 08/10/2014, à 17:08

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#3 Le 08/10/2014, à 17:11

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#4 Le 08/10/2014, à 17:38

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#5 Le 08/10/2014, à 17:47

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#6 Le 08/10/2014, à 17:56

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#7 Le 08/10/2014, à 18:17

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#8 Le 08/10/2014, à 18:30

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#9 Le 08/10/2014, à 19:01

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#10 Le 08/10/2014, à 19:33

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#11 Le 08/10/2014, à 20:11

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#12 Le 08/10/2014, à 21:28

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#13 Le 08/10/2014, à 21:58

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#14 Le 08/10/2014, à 22:04

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#15 Le 08/10/2014, à 22:27

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#16 Le 09/10/2014, à 10:47

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#17 Le 09/10/2014, à 10:55

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#18 Le 09/10/2014, à 10:57

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#19 Le 09/10/2014, à 11:14

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#20 Le 09/10/2014, à 13:00

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#21 Le 09/10/2014, à 13:11

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#22 Le 09/10/2014, à 13:18

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#23 Le 09/10/2014, à 13:33

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#24 Le 09/10/2014, à 13:34

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

#25 Le 09/10/2014, à 14:16

Re : [Résolu HS] Carte mamoire SDHC illisible (formatage samsung)

Pied de page des forums