#1 Le 14/10/2014, à 21:19
- Uliwi
[résolu] Dual boot OK sur HP Envy Sleekbook 6-1260sf avec Windows 8 64
Bonjour,
À toutes fins utiles, j'ai listé toutes les manipulations faites sur mon HP Envy Sleekbook 6-1260sf (Bios UEFI = Insyde F.21, OS déjà installé Windows 8 64 bits) pour installer Linux Ubuntu 14.04.1 64 bits.
Désolé de mes approximations, je ne suis qu'un utilisateur (afin de me former j'ai voulu faire malgré tout cette installation moi-même). Vous pourrez toujours si vous le souhaitez apporter des rectifications ou des précisions qui seront certainement les plus utiles. Je tiens particulièrement à remercier les personnes qui ont rédigé tous ces tutoriels ou qui aident les utilisateurs dans les forums, ça m'a été vraiment indispensable!
I - Vérifications diverses
Vérification que Windows est installé en mode UEFI :
- Vérification que la partition est en mode GUI (GPT) c'est-à-dire au standard UEFI (CF note 1)
- Vérification du mode d'installation de windows 8 via la console (2)
( Pour éviter tout conflit, j'ai compris que je devais installer tous les OS de mon ordi de la même manière, soit en MBR, soit en GPT-UEFI. Comme UEFI est le nouveau standard, autant l'employer dès que possible. J'ai cru comprendre que sur mon ordi Windows est préinstallé des deux façons à la fois mais que le BIOS-UEFI priorise le lancement UEFI boot sur le legacy boot (celui-ci activant le MBR). )
II – Modifications du « BIOS »-UEFI
Démarrage du PC et appui de la touche pour entrer dans le "BIOS" UEFI (ici F10 ou bien ESC suivi de F10), aller dans le sous-menu des Options de boot
- Secure boot <disabled> (mais peut-être que je pourrais laisser cette option enabled) ;
- Legacy boot <disabled> (le legacy boot effectue le chargement sur le MBR, dans le BIOS-UEFI HP, on ne peut désactiver l'UEFI Boot qu'en mettant un "!" devant chaque option de celui-ci, l'UEFI est prioritaire sur le legacy dans ce bios-uefi) ;
- Changer la priorité du boot UEFI (3) pour booter en premier sur le périphérique (ici USB) qui contiendra le nouvel OS à installer (ici Linux Ubuntu) ;
- Intel Rapid Start technology <disabled> (4) ;
- ? Désactiver Smart Response Technology (5).
III – Modifications dans Windows 8
- Démarrage du PC sur Windows 8 et réduction de la partition principale de Windows (chez moi sur C : correspondant à sda4) via l'outil intégré dans Windows (6) pour avoir un espace libre (espace non alloué à cet endroit).
- Noté, au passage, toutes les partitions
- Désactivation de Rapid Technology c'est-à-dire du Démarrage rapide (7).
IV – Essayer Ubuntu sans l'installer
(J'ai préféré prendre la dernière version Ubuntu 14.04-1 afin de gérer au mieux les problèmes de double boot en UEFI)
Démarrage du PC sur la Live USB d'Ubuntu 14.04.1 64 bits (Essayer Ubuntu sans l'installer)
Test si ça fonctionne correctement (carte graphique, son, réseau filaire et Wi-Fi).
V – Installation Ubuntu
- Toujours en session Live, installation d'Ubuntu en cliquant sur l'icône de l'installeur.
- Partitionnement Gparted en choisissant le partitionnement manuel « Autre chose »
- message d'erreur GPARTED :
"The backup GPT Table is not at the end of the disk as it should be. This might mean that another operating system believes the disk is smaller. Fix, by moving the backup to the end (and removing the old backup)?"
Les tutos me renvoient à un problème qui peut avoir plusieurs causes (8), dont la plus courue est la technologie Raid. (Je comprends que la gestion de 2 disques comme un seul par Raid rend problématique la place du GPT secondaire (le backup GPT), mais bon d'un autre côté ça veut dire que la table GPT primaire est bonne.) Je vérifie donc si c'est la faute au Raid (9). C'est bien le cas. (Il me semble que dans un des innombrables tutos que j'ai lus, Linux pourrait être à même de gérer cette technologie Raid à partir du noyau Linux 3.10 (à vérifier). Sur mon ordi, c'est du raid 0, mais de toute façon, j'ignore comment fonctionne le Raid, si Windows en a besoin, et je ne veux pas pour le moment destabiliser Windows. Je laisse donc le truc en l'état du côté de cet OS...)
Comme je vois que par rapport à ce message d'erreur, dans Gparted, la tendance est à répondre fix, je réponds à mon tour :
fix
C'est alors que je vois bien toutes les partitions apparaître, comme je les ai vues précédemment dans Windows.
- Dans GParted il y a aussi une erreur sur la clé USB qui a un MBR et un UEFI dans ce cas j'ai ignoré cette erreur car je comprends que c'est normal d'avoir sur une clé d'installe le MBR et l'UEFI.
partitionnement manuel (deux partitions créées dans l'espace précédemment libéré : une de swap et l'autre racine)
Je laisse le choix par défaut pour le chargeur Linux sur le disque (ici c'est sda) car c'est sur lui que se trouve la partition Linux.
VI – Poursuite et fin de l'installation
Le redémarrage du PC montre qu'il est bridé pour démarrer sur Windows (10).
VII- Correction du démarrage forcé sur Windows
Selon le tutoriel Ubuntu « Ordinateurs avec UEFI (~EFI) »
http://doc.ubuntu-fr.org/uefi
- Sauvegarder l'UEFI avant sa modification, ajouter l'option -R voir note (11).
- Remplacer le programme d'amorçage standard.
Conclusion : c'est scandaleux, les constructeurs brident l'UEFI à des fins ouinedosiennes, obligeant à hacker son propre ordinateur si l'on veut faire du double boot, lequel reste cependant le meilleur moyen de promouvoir Linux auprès des non connaisseurs.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
NOTES
Sources : Je cite souvent ici les extraits de différents tutos (désolé de ne pas citer toutes les sources, j'avais d'autres priorités, mais ce sont souvent les tutos ou le forum Ubuntu qui m'ont été les plus utiles).
(1)
Vérification que la partition est en mode GUI (GPT) c'est-à-dire au standard UEFI :
clic droit sur "Ordinateur", sélection “Gérer”, puis “Stockage” enfin “Gestion des disques”,
clic droit sur la partition Windows, propriété
clic sur l'onglet Volume
Regarder "Type de partition".
indiqué "Table de partition GUID (GPT)".
(2)
Vérification du mode d'installation de windows 8 via la console :
Dans Windows, le programme terminal s'appelle cmd, l'ouvrir en tant qu'administrateur, entrer la commande suivante :
bcdedit
le path indique l'extension, si .efi, windows est installé sous ce mode.
(3)
Changer la priorité du boot UEFI (note)
ici, pour une installation à partir d'une clé USB bootable, ça donne, après modif :
UEFI boot order
USB disquette on key/USB hard disk
OS Boot manager
USB CD/DVD Rom drive
! Network adapter
(4)
Intel Rapid Start technology <disabled>
Si j'ai bien compris (pardon de mes approximations), cela simule une veille pour redémarrer plus vite, mais occupe de la RAM. C'est pratique si un seul OS sur l'ordinateur, mais si plusieurs, ça donnera n'importe quoi. Et quand bien même Linux serait le seul OS sur l'ordi, je ne suis pas sûr qu'il gère pour le moment cette technologie (à vérifier). Donc <disabled>.
(5)
Désactivation de Smart Response Technology
Dans mon bios-uefi, je n'ai pas trouvé cette option.
Je me suis demandé si cela ne correspondait pas au raid dans Windows ou au cache en écriture. Je n'ai cependant pas modifié ces gestions dans Windows. Donc...
"Ordinateur" et selectionnez “Gérer”, puis “Stockage” enfin “Gestion des disques”,
partition, clic droit, propriété, clic sur l'onglet Volume
Propriétés de HGST...
Stratégie de cache en écriture
Activer le cache en écriture <coché>
Désactiver le vidage du cache d'écriture windows sur le périphérique <décoché>
… laissés tels quels.
(6)
Libération de l'espace disque :
(J'ai déjà vu un redimentionnement par Gparted, mais les tutos que j'ai lus parlent d'un redimentionnement dans Windows, dont acte.)
clic droit sur "Ordinateur" et selectionnez “Gérer”, puis “Stockage” enfin “Gestion des disques”
Effectuez un clic droit sur la partition Windows et sélectionner “Réduire le volume”
( espace de réduction, c'est tout ce qu'on peut réduire au maximum
quantité d'espace à réduire, c'est la taille de l'espace à libérer ).
(7)
Désactiver le démarrage rapide de windows 8 :
(Je comprends que cette opération complète la désactivation de l'option correspondante dans le bios-uefi.)
Barre des charmes / rechercher / Paramètres / Boutons d'alimentation
ou
Matériel et audio / Options d'alimentation / Paramètres système ;
puis
Modifier des paramètres actuellement non disponibles
faire défiler la page vers le bas
puis
décocher Activer le démarrage rapide.
(8)
The backup GPT Table is not at the end of the disk (Message de GPARTED)
The backup GPT Table is not at the end of the disk as it should be. This might mean that another operating system believes the disk is smaller. Fix, by moving the backup to the end (and removing the old backup)?
Impossible de retrouver le site anglophone où j'ai pu lire (ma traduction approximative) :
"Ce type de problème se produit généralement pour une des trois raisons:
1/ Vous avez un matériel RAID et vous avez ajouté un disque à la matrice.
Vous pouvez dire à parted de résoudre le problème (fix).
2/ La carte-mère a son propre software RAID qui était actif lors de la repartition
"Synchroniser soit en activant le type pertinent de prise en charge RAID sous Linux ou en le désactivant dans le firmware et Windows.
Pour une installation sur un seul disque, je recommande cette dernière option,
même si cela signifie que vous verrez toujours le message d'erreur dans parted."
3/ Quelque chose a mis une zone protégée de l'hôte (HPA) sur le disque,
mais l'un de vos systèmes d'exploitation ne respecte pas la HPA.
Vous pouvez vérifier cela dans Linux en tapant sudo hdparm -N /dev/sda ;
vous devriez obtenir un rapport indiquant si la LPD est activé ou désactivé."
(9)
Vérification si la technologie RAID est utilisée sur l'ordinateur.
Il y a trois types de Raid : le matériel, le semi-matériel-semi-logiciel (Fakeraid), le logiciel.
- Dans Windows 8, clic droit sur "Ordinateur" et selectionnez “Gérer”, puis “Stockage” enfin “Gestion des disques”, partition, clic droit, propriété, clic sur l'onglet Volume
Sur mon ordi, l y a par là une info qui montre que c'est du Raid 0.
( Et est-ce que cela correspond à ce que, sur le Volume, on voit dans Propriétés puis l'onglet Stratégies (à savoir l'option cochée « Activer le cache en écriture sur le périphérique ») ? )
Je lis quelque part en anglais (j'ai traduit approximativement) :
"RAID logiciel permet à l'OS de contrôler l'array (matrice ou grappe) RAID. Cela devrait être le plus facile à mettre en place et il est recommandé, sauf si vous voulez un dual boot Linux et Windows "off a single array" hors un seul array. Fakeraid permet le contrôle de southbridge le tableau, et donc à la fois Windows et Linux peut voir et utiliser le tableau."
- selon
http://doc.ubuntu-fr.org/tutoriel/comme … 0_materiel
Sous Linux, pour trouver le nom de son disque dur RAID-0
Dans un terminal, exécutez la commande suivante :
ls /dev/mapper
… chez moi, ça renvoit « control ».
(10)
Le démarrage du PC après une installation en double boot :
Si tout s'est bien passé, les deux OS sont accessibles, sinon il faudra réparer le chargeur.
Il y a de fortes chances pour que le boot se fasse sur windows sans aucun choix préalable, c'est que le constructeur a éhontément bridé l'UEFI pour booter sur cet OS, auquel cas il reste tout de même possible de démarrer Linux en
- enfonçant la touche de fonction appropriée (ici F9) afin de booter sur
- un menu incluant le GRUB pour arriver enfin au
- menu proposant Linux.
Mais bon cet accès indirect à Linux n'est pas très satisfaisant.
(11)
http://doc.ubuntu-fr.org/uefi
Sous Ubuntu, faire une copie des fichiers EFI dans un terminal :
sudo cp -R /boot/efi/ ~/EFI_sauvegarde
(Ajouter -R par rapport à ce qu'il y a dans le tutoriel.)
Hors ligne
#2 Le 15/10/2014, à 10:56
- malbo
Re : [résolu] Dual boot OK sur HP Envy Sleekbook 6-1260sf avec Windows 8 64
Bonjour Uliwi,
Beau travail.
Ce serait utile que tu démarres sur ton Ubuntu fraîchement installé et que depuis cette session tu fasses un Boot-Info en suivant cette procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Si tu es d'accord pour le faire, tu posteras l'URL du Boot-Info dans ta réponse. Pourquoi je propose de le faire depuis ton Ubuntu installé ? Parce que de cette façon, le Boot-Info obtenu montre en détail le paramétrage du système UEFI, avec le chemin exact des entrées.
D'autre part, je viens d’enquêter sur ton modèle d'ordi. Je ne suis pas certain que c'est exactement le même modèle que le tien mais je vois qu'il y a le modèle Envy M6-1260SF dans la Liste des portables « HP »
C'est danlap qui a ce modèle (voir ce post) et c'est lui qui a renseigné la Liste des portables « HP » sur ce modèle. Si tu avais besoin d'info, tu pourrais peut-être lui envoyer un e-mail.
Dernière modification par malbo (Le 15/10/2014, à 11:16)
Hors ligne
#3 Le 16/10/2014, à 13:22
- Uliwi
Re : [résolu] Dual boot OK sur HP Envy Sleekbook 6-1260sf avec Windows 8 64
Bonjour Malbo
Merci de ces infos !
Je regarderai si j'ai aussi ce problème de carte graphique hybride mentionné au sujet du portable dans la Liste des portables HP.
Le rapport est à cette adresse:
http://paste.ubuntu.com/8573283/
Détail : je dois avoir un soucis quelconque avec ma clé USB boot-repair, en attendant d'enquêter à ce propos, j'ai cru bon de pouvoir installer boot-repair dans Ubuntu comme suit (pour l'y lancer et avoir le rapport)
sudo add-apt-repository ppa:kranich/cubuntu
sudo apt-get update
sudo apt-get install -y boot-repair
Dernière modification par Uliwi (Le 16/10/2014, à 13:25)
Hors ligne
#4 Le 16/10/2014, à 14:06
- Bougron
Re : [résolu] Dual boot OK sur HP Envy Sleekbook 6-1260sf avec Windows 8 64
Bonjour
Bravo pour la qualité de ton tuto qui montre comment désactiver le démarrage rapide de windows.
Alors que quelques personnes se sont cassées la figure sur ce problème
Cela t'as permis d'avoir un second disque de 32 GO qui est certainement un SSD de qualité.
Il ne sera plus utilisé pour le démarrage rapide de windows car tu as désactivé la fonctionnalité.
Je ne sais pas si tu en avait en vue une utilisation. Si oui je me tais, Sinon c'était un endroit idéal pour installer UBUNTU sans rien modifier dans le premier disque..
+++Attention Tu n'as pas désactivé le RAIDS0 et windows risque de continuer a croire qu'il a le droit d'écrire dans le second disque.
Est-ce seulement sa fonctionnalité d'acès rapide qui fait cela ou aussi son logiciel d'ecriture différée pour les petits fichiers dans SDB prioritairement ?
Fais très attention si tu décides de mettre des données par ubuntu dans SDB qu'elles ne soient pas détruites un certain temps plus tard par un lancement de windows continuant a utiliser une fonctionnalité RAIDS.
Dernière modification par Bougron (Le 16/10/2014, à 14:31)
Hors ligne
#5 Le 16/10/2014, à 16:26
- malbo
Re : [résolu] Dual boot OK sur HP Envy Sleekbook 6-1260sf avec Windows 8 64
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
/EFI/HP/BIOSUpdate/CryptRSA.efi
/EFI/HP/BIOSUpdate/CryptRSA32.efi
/EFI/HP/BIOSUpdate/HpBiosUpdate.efi
/EFI/HP/BIOSUpdate/HpBiosUpdate32.efi
/EFI/HP/SystemDiags/CryptRSA.efi
/EFI/HP/SystemDiags/CryptRSA32.efi
/EFI/HP/SystemDiags/SystemDiags.efi
/EFI/HP/SystemDiags/SystemDiags32.efi
/EFI/HP/boot/bootmgfw.efi /EFI/HP/boot/bootmgr.efi
/EFI/HP/boot/memtest.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgfw_orig.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
/EFI/HP/EFI/Boot/bootx64.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/BCD
sda7: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
mount: unknown filesystem type ''
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 821,247 819,200 Windows Recovery Environment (Windows)
/dev/sda2 821,248 1,353,727 532,480 EFI System partition
/dev/sda3 1,353,728 1,615,871 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 1,615,872 528,656,383 527,040,512 Data partition (Windows/Linux)
/dev/sda5 917,776,384 918,493,183 716,800 Windows Recovery Environment (Windows)
/dev/sda6 918,493,184 976,764,927 58,271,744 Data partition (Windows/Linux)
/dev/sda7 528,656,384 540,375,039 11,718,656 Swap partition (Linux)
/dev/sda8 540,375,040 638,031,871 97,656,832 Data partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 32.0 GB, 32017047552 bytes
255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 62,533,295 62,533,295 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 8,386,559 8,384,512 Intel Fast Flash (iFFS) partition (for Intel Rapid Start technology)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 FA0A96FB0A96B45B ntfs WINRE
/dev/sda2 FAA7-6489 vfat
/dev/sda4 3A8824FE8824B9F1 ntfs OS
/dev/sda5 00BA32B6BA32A7D4 ntfs
/dev/sda6 F49E95909E954BCC ntfs RECOVERY
/dev/sda8 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda2 /boot/efi vfat (rw)
/dev/sda8 / ext4 (rw,errors=remount-ro)
=========================== sda8/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
else
search --no-floppy --fs-uuid --set=root 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6948fb1a-d91f-49c0-8480-5c6e1fae1cbc' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
else
search --no-floppy --fs-uuid --set=root 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
fi
linux /boot/vmlinuz-3.13.0-37-generic.efi.signed root=UUID=6948fb1a-d91f-49c0-8480-5c6e1fae1cbc ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-37-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-6948fb1a-d91f-49c0-8480-5c6e1fae1cbc' {
menuentry 'Ubuntu, avec Linux 3.13.0-37-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-37-generic-advanced-6948fb1a-d91f-49c0-8480-5c6e1fae1cbc' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
else
search --no-floppy --fs-uuid --set=root 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
fi
echo 'Chargement de Linux 3.13.0-37-generic…'
linux /boot/vmlinuz-3.13.0-37-generic.efi.signed root=UUID=6948fb1a-d91f-49c0-8480-5c6e1fae1cbc ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-37-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-37-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-37-generic-recovery-6948fb1a-d91f-49c0-8480-5c6e1fae1cbc' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
else
search --no-floppy --fs-uuid --set=root 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
fi
echo 'Chargement de Linux 3.13.0-37-generic…'
linux /boot/vmlinuz-3.13.0-37-generic.efi.signed root=UUID=6948fb1a-d91f-49c0-8480-5c6e1fae1cbc ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-37-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-6948fb1a-d91f-49c0-8480-5c6e1fae1cbc' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
else
search --no-floppy --fs-uuid --set=root 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=6948fb1a-d91f-49c0-8480-5c6e1fae1cbc ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-6948fb1a-d91f-49c0-8480-5c6e1fae1cbc' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
else
search --no-floppy --fs-uuid --set=root 6948fb1a-d91f-49c0-8480-5c6e1fae1cbc
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=6948fb1a-d91f-49c0-8480-5c6e1fae1cbc ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-FAA7-6489' {
insmod part_gpt
insmod fat
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 FAA7-6489
else
search --no-floppy --fs-uuid --set=root FAA7-6489
fi
chainloader /EFI/Microsoft/Boot/bootmgfw_orig.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda8/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda8 during installation
UUID=6948fb1a-d91f-49c0-8480-5c6e1fae1cbc / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=FAA7-6489 /boot/efi vfat defaults 0 1
# swap was on /dev/sda7 during installation
#UUID=de9f8a63-bfd7-49d7-ba15-a9538c648d66 none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda8: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-iXCI6aOr/Tmp_Log: No such file or directory
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-10-16__12h47 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed root=UUID=6948fb1a-d91f-49c0-8480-5c6e1fae1cbc ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda8:L'OS actuellement utilisé - Ubuntu 14.04.1 LTS CurrentSession:linux
/dev/sda2@/EFI/Microsoft/Boot/bootmgfw_orig.efi:Windows Boot Manager:Windows:efi
=================== blkid:
/dev/sda1: LABEL="WINRE" UUID="FA0A96FB0A96B45B" TYPE="ntfs"
/dev/sda2: UUID="FAA7-6489" TYPE="vfat"
/dev/sda4: LABEL="OS" UUID="3A8824FE8824B9F1" TYPE="ntfs"
/dev/sda5: UUID="00BA32B6BA32A7D4" TYPE="ntfs"
/dev/sda6: LABEL="RECOVERY" UUID="F49E95909E954BCC" TYPE="ntfs"
/dev/sda8: UUID="6948fb1a-d91f-49c0-8480-5c6e1fae1cbc" TYPE="ext4"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda4.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 23 00:21 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 21:02 00_header
-rwxr-xr-x 1 root root 6058 mai 8 14:08 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 21:02 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 21:02 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 21:02 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 21:02 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 21:02 40_custom
-rwxr-xr-x 1 root root 216 mai 15 21:02 41_custom
-rw-r--r-- 1 root root 483 mai 15 21:02 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda8: UUID=FAA7-6489 (sda2)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw_orig.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda6/EFI/Boot/bootx64.efi
efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 3001,3000,3002,2001,2002,2003
Boot0000* Ubuntu HD(2,c8800,82000,03c11b11-5c63-4659-98c0-911eef0bff2d)File(EFIubuntugrubx64.efi)RC
Boot0001* Windows Boot Manager HD(2,c8800,82000,03c11b11-5c63-4659-98c0-911eef0bff2d)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...O................
Boot0002* ubuntu HD(2,c8800,82000,03c11b11-5c63-4659-98c0-911eef0bff2d)File(EFIubuntushimx64.efi)
Boot2001* USB Drive (UEFI) RC
Boot3000* Internal Hard Disk or Solid State Disk RC
Boot3001* Internal Hard Disk or Solid State Disk RC
Boot3002* Internal Hard Disk or Solid State Disk RC
=================== UEFI/Legacy mode:
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda8 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA HGST HTS545050A7 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 420MB 419MB ntfs Basic data partition hidden, diag
2 420MB 693MB 273MB fat32 EFI system partition boot
3 693MB 827MB 134MB Microsoft reserved partition msftres
4 827MB 271GB 270GB ntfs Basic data partition msftdata
7 271GB 277GB 6000MB
8 277GB 327GB 50.0GB ext4
5 470GB 470GB 367MB ntfs hidden, diag
6 470GB 500GB 29.8GB ntfs Basic data partition hidden, msftdata
Model: ATA LITEONIT LMT-32L (scsi)
Disk /dev/sdb: 32.0GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 4294MB 4293MB Basic data partition
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA HGST HTS545050A7;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:693MB:273MB:fat32:EFI system partition:boot;
3:693MB:827MB:134MB::Microsoft reserved partition:msftres;
4:827MB:271GB:270GB:ntfs:Basic data partition:msftdata;
7:271GB:277GB:6000MB:::;
8:277GB:327GB:50.0GB:ext4::;
5:470GB:470GB:367MB:ntfs::hidden, diag;
6:470GB:500GB:29.8GB:ntfs:Basic data partition:hidden, msftdata;
BYT;
/dev/sdb:32.0GB:scsi:512:4096:gpt:ATA LITEONIT LMT-32L;
1:1049kB:4294MB:4293MB::Basic data partition:;
=================== mount:
/dev/sda8 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda2 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
/home/acratule/.Private on /home/acratule type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=a508e02a80a09307,ecryptfs_fnek_sig=72897867a25b3966)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=acratule)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd freefall full fuse hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 7f 0c 00 00 00 00 00 |................|
00000030 55 85 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U...............|
00000040 f6 00 00 00 01 00 00 00 5b b4 96 0a fb 96 0a fa |........[.......|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
ls /boot/efi/1:
ls /boot/efi: boot
BOOTSECT.BAK
EFI . Veuillez indiquer ce message à boot.repair@gmail.com
=================== hexdump -n512 -C /dev/sda2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 fe 1b |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 88 0c 00 |........?.......|
00000020 00 20 08 00 01 02 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 89 64 a7 fa 4e 4f 20 4e 41 4d 45 20 20 |..).d..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 18 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff ff 69 1f 00 00 00 00 |..........i.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 f1 b9 24 88 fe 24 88 3a |..........$..$.:|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 b4 36 |........?....(.6|
00000020 00 00 00 00 80 00 80 00 ff ef 0a 00 00 00 00 00 |................|
00000030 aa 74 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |.t..............|
00000040 f6 00 00 00 01 00 00 00 d4 a7 32 ba b6 32 ba 00 |..........2..2..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
ls /mnt/boot-sav/sda6/1:
ls /mnt/boot-sav/sda6: boot
bootmgr
bootmgr.efi
EFI
FactoryUpdate
hp
preload
recovery
$RECYCLE.BIN
RM_Reserve
System Volume Information . Veuillez indiquer ce message à boot.repair@gmail.com
=================== hexdump -n512 -C /dev/sda6
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 18 bf 36 |........?......6|
00000020 00 00 00 00 80 00 80 00 ff 27 79 03 00 00 00 00 |.........'y.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 cc 4b 95 9e 90 95 9e f4 |.........K......|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda8 ext4 46G 4.7G 39G 11% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 385M 1.2M 384M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 160K 1.9G 1% /run/shm
none tmpfs 100M 40K 100M 1% /run/user
/dev/sda2 vfat 256M 102M 155M 40% /boot/efi
/home/acratule/.Private ecryptfs 46G 4.7G 39G 11% /home/acratule
/dev/sda1 fuseblk 400M 265M 136M 67% /mnt/boot-sav/sda1
/dev/sda4 fuseblk 252G 43G 210G 17% /mnt/boot-sav/sda4
/dev/sda5 fuseblk 350M 26M 325M 8% /mnt/boot-sav/sda5
/dev/sda6 fuseblk 28G 25G 3.3G 89% /mnt/boot-sav/sda6
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x78176060
Device Boot Start End Blocks Id System
/dev/sda1 1 976773167 488386583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 32.0 GB, 32017047552 bytes
255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0f779c74
Device Boot Start End Blocks Id System
/dev/sdb1 1 62533295 31266647+ ee GPT
Partition 1 does not start on physical sector boundary.
EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda2/efi/.../grub*.efi !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
Vous souhaiterez peut-être ré-essayer après avoir activé l'option [Sauvegarder et renommer les fichiers EFI Windows].
=================== Default settings
Recommended-Repair
This setting would purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda8, using the following options: upgrade-grub sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
En regardant ce Boot-Info j'ai l'impression que tu as bien désactivé IRST comme tu l'as écrit dans ton post #1 : on voit une partition /dev/sdb1 relative à IRST mais c'est tout (aucune mention de RAID dans ce Boot-Info) :
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 8,386,559 8,384,512 Intel Fast Flash (iFFS) partition (for Intel Rapid Start technology)
D'autre part, on voit que tu as suivi le paragraphe Contourner le démarrage forcé sur Windows 8 de la doc UEFI. C'est là qu'on le voit :
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-FAA7-6489' {
insmod part_gpt
insmod fat
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 FAA7-6489
else
search --no-floppy --fs-uuid --set=root FAA7-6489
fi
chainloader /EFI/Microsoft/Boot/bootmgfw_orig.efi
}
Avec le chainloader sur le fichier bootmgfw_orig.efi
C'est bien compliqué comme usine à gaz de contournement (trafiquer os-prober, c'est louche). Un appui sur F9 au démarrage, c'est quand même préférable à mon avis. Mais bon...
Dernière modification par malbo (Le 16/10/2014, à 16:46)
Hors ligne